LevelOne WAP-8021 User Manual
Displayed below is the user manual for WAP-8021 by LevelOne which is a product in the Wireless Access Points category. This manual has pages.
Related Manuals
1
WAP-6017/WAP-8021
N300 / AC1200 WIRELESS ACCESS POINT,
CONTROLLER MANAGED
User’s Manual
V1. 0_20170915
2
Attention:
1. Check box contents:
Antenna
QIG
Power Adapter
2. Warning:
3
Contents
CHAPTER 1 HARDWARE AND OPERATION MODE INSTRUCTION .................................................. 4
1.1 LED INDICATOR: .................................................................. 4
1.2 AP INTERFACE: ................................................................... 5
CHAPTER 2 CONNECT WIRELESS AP WITH PC .................................................................................... 6
CHAPTER 3 LOGIN ......................................................................................................................................... 7
CHAPTER 4 WEB GUI INTERFACE SETTING ....................................................................................... 9
4.1 STATUS: ........................................................................ 9
4.2 WIZARD CONFIGURATION: ........................................................... 12
4.2.1 Gateway Mode: ................................................................................................................................. 12
4.2.2 WiFi Repeater mode ......................................................................................................................... 14
4.2.3 WISP Operation mode: .................................................................................................................... 18
4.2.4 AP Operation mode: ......................................................................................................................... 19
4.3 ADVANCED SETTING: ............................................................... 21
4.3.1 Device Status: .................................................................................................................................... 21
4.3.2 Wireless Basic settings: .................................................................................................................... 22
4.3.3 Virtual AP: ........................................................................................................................................ 23
4.3.4 Access Control: ................................................................................................................................. 23
4.3.5 Advanced Settings: ........................................................................................................................... 24
4.3.6 Network: ............................................................................................................................................ 24
4.3.7 Management: .................................................................................................................................... 25
CHAPTER 5 SHARE INTERNET AND OBTAIN IP ADDRESS AUTOMATICALLY ....................... 30
CHAPTER 6 TROUBLE SHOOTING ....................................................................................................... 31
APPENDIX A LICENSE STATEMENT / GPL CODE STATEMENT ..................................................... 32
4
Chapter 1 Hardware and Operation mode Instruction
P1 WAP-6017
P2 WAP-8021
1.1 LED indicator:
LEDs
Full Name
Description
Power
Power Light
On The Device is powered
Off The Device is not powered
USB
USB Light
On USB is connected
5.8G
5.8G WIFI
On 5.8G WIFI is on
2.4G
2.4G WIFI
On 2.4G WIFI is on
System
System Light
Blink operating properly.
On without blink or off operating not properly.
5.8G
2.4G
System
5
1.2 AP Interface:
P3 WAP-6017
P4 WAP-8021
Port
Description
WAN
The WAN port is used to connect to network devices, such as a switch
LAN
The LAN port is used to connect to network devices, such as a switch or PC
Reset
With the AP powered on, press the Reset button for 15 seconds until the USB LED
blink with green light and System LED on without blink. The AP will restart itself and
reset the device to factory default settings.
USB
To connect with USB storage device
Power
To power the device by DC
6
Chapter 2 Connect Wireless AP with PC
Use can connect the PC with wireless AP by Wireless SSID and LAN cable:
The diagram of wireless connection showed as follow:
Pls note: the default SSID is Wireless2.4G/5.8G, SSID’s password is 66666666
P5 Connect router with PC in WiFi
The diagram of LAN cable connection showed as follow:
P6 Connection way
7
Chapter 3 Login
The necessary information about log in is displayed on the sticker of the product, including the URL, User
Name and Pass Word
1）Connect the Ceiling AP with computer
2）Configure the PC’s local connection IP address as 192.168.188.X (X is number from 2 to 252), subnet
mask is 255.255.255.0, follow P7 and P8 to finish.
P7 Setting of computer’s IP address
P 8 Setting of computer’s IP address
8
3) Input 192.168.188.253 into IE browser, then pop up the login page, the default login password: admin, then
login, pls do following P9
P9 Login
4) After login, then P10 Device Status will be showed;
This page will show the Wireless AP’s default operation mode, channel, connection status, CPU usage,
Wireless settings, LAN Setting, Wireless AP’s Location, hardware/firmware version.
P10: WAP-6017 Device Status
9
P11: WAP-8021 Device Status
Chapter 4 WEB GUI interface Setting
4.1 Status:
After login, then P12 Device Status and home page will be showed:
P12: WAP-6017 Device Status
10
P13: WAP-8021 Device Status
In this page, show the AP’s default operation mode, channel, end user QTY, connection status, CPU usage status,
Wireless, LAN and AP location info.
Then in Wireless Setting, GUI configuration page showed as below:
User can configure the SSID, password, band width, channel here, then Apply to finish.
P14. Wireless setting
11
LAN Setting to configure the DHCP or Fix IP
P15 LAN Setting
AP location setting: can mark where the AP set up, and AP name as P14:
P16 AP Postion setting
12
4.2 Wizard Configuration:
Wizard: It instruct users to configure wireless AP’s operation mode based on needs: there are four operation mode
including gateway, repeater, WISP, Wireless AP. Please confirm the operation mode first before configuration
starting.
Click Wizard in Status page, will pop up following page to configure the operation mode and there are explanation
for each operation mode for better application.
P17 Operation mode
4.2.1 Gateway Mode:
Before Click Gateway mode, confirm your internet will be static IP, PPPoE, or DHCP:
Then will pop up following picture after click it, Please choose the right WAN setting mode, then click next to
continue.
P18. WAN setting in Gateway Mode
13
P19 Wireless Setting in Gateway Mode
When click Next, then will complete the Gateway mode setting and show following picture:
P20 Complete the setting in Gateway Mode
When return to Status, will show wireless router’s SSID, internet connection, LAN connection status showed as
follow:
14
P21 Status in Gateway Mode
4.2.2 WiFi Repeater mode
A. Login the Web management page, click “Wizard”, then “WiFi Repeater”
B. Select the AP’s SSID want to bridge, take “wireless 2.4G” for example, then input the AP’s key, click next to
complete.
P22 WAP-6017 Repeater Mode
Click Return button, will back to Status, show Repeater mode data, show fail or success, and user can configure this
data in this page if required.
15
P23 WAP-6017 Status in Repeater Mode
In wifi repeater operation mode, the default is SSID disable. If want to enable SSID, then click Wireless Setting.
Pls note, when click wireless relay setting, following page will pop up, you can make change from here easily:
P24 WAP-6017 Wireless Relay Setting
WAP-8021
A. Login the Web management page, click “Wizard”, then “WiFi Repeater”
B. Scan AP and select the AP’s SSID want to bridge, take “wireless 2.4G” for example, then input the AP’s key, click
next to complete.
16
P25 WAP-8021 Repeater Mode 1
C. Configure the SSID and password the AP going to broadcast. If you have repeated 2.4G WIFI, in default setting,
you are only allowed to broadcast 5.8G WIFI.
P26 WAP-8021-Repeater Mode 2
Click Return button, will back to Status, show Repeater mode data, show fail or success, and user can configure this
data in this page if required.
17
P27 WAP-8021 Status in Repeater Mode
In wifi repeater operation mode, only one band SSID can be broadcast. If want to enable dual band SSID, then click
Wireless Setting. Pls note, when click wireless relay setting, following page will pop up. Turn on and there will be
dual band WIFI SSID.
P28 WAP-8021 Wireless Relay Setting
18
4.2.3 WISP Operation mode:
Click WISP operation mode in Wizard, then will pop up the configure page, pls set the WISP operation mode based
on the steps showed in picture:
P29 WISP Mode
Configure the right WAN setting in WISP operation mode, then next to complete
P30 WAN setting in WISP mode
Then complete and back to status, will show the connection fail or success, then can configure the data based on
request:
19
P31 Status in WISP mode
Remark: When click WAN Setting, will pop up following picture to ask you choose PPPoE, DHCP or Static IP
P32 WAN setting in WISP mode
4.2.4 AP Operation mode:
Set the wireless data, AP Location info as required, then click next to continue and enter into LAN setting.
After LAN setting, complete the AP mode configuration and back to Status:
20
P33 Wireless setting in AP Mode
P34 LAN Setting in AP Mode
21
P35 Status in AP Mode
4.3 Advanced Setting:
In advanced setting, mainly for wireless AP’s device status, wireless setting, Networking setting and AP
management configure.
Let’s Click Advanced Setting in status page, will show return home, Setup Wizard which we showed before.
Let’s show more in Device Status, Wireless, Network and Management in following pages:
4.3.1 Device Status:
to show the Wireless AP’s status, Wireless Status and LAN status.
In status, mainly to check the ceiling wireless AP’s firmware version, hardware version, uptime info.:
P36 Device Status
22
In wireless status, to show wireless AP’s SSID, MAC address for WiFi, Channel, Encryption, Client List info.
P37 Wireless Status
In LAN Status, we can check wireless AP’s IP address, Subnet Mask, LAN MAC address and other info
showed in following picture.
P38 LAN Status
4.3.2 Wireless Basic settings:
For wireless basic settings, mainly to configure the wireless SSID, password, band width ,encryption,
channel, Multi SSID.
23
P39 Basic Setting in Wireless
4.3.3 Virtual AP:
There are 3 virtual AP in 2.4G wireless, if need do multi SSID, then users can configure it showed in following
picture:
P40 Virtual AP
4.3.4 Access Control:
Allow or deny the users access into this wireless AP based on MAC address.
24
P41 MAC Access Control
4.3.5 Advanced Settings:
In this page, will show the regional, mode, RF Power, Max user access...
P42 Advanced Setting
4.3.6 Network:
In network, mainly to show the LAN setting and tag VLAN as follow:
In LAN Settings, mainly including static IP and DHCP.
DHCP from controller means you are allowing controller to manage the IP of the AP and end users. That is to say
only when DHCP from controller is chosen can the controller find and mange the AP.
25
Static IP means the AP has the right to manage its own IP address. When the IP segment of the AP is same as
controller’s, the AP can also be found and managed by controller.
P43 Network Setting
In VLAN part, need an VLAN switch and make sure the multi SSID is enable, then input the VLAN ID to different
SSID.
P44 Tag VLAN Setting
4.3.7 Management:
In this part, show the system time, Logs, upgrade firmware, system, user info.
And we show System time, how to upgrade firmware and system page to users:
Get time from NTP server can only be available under Gateway and WISP Mode. Before sync with host, please
select your Time zone.
26
P45 System Time
In Logs part, you can copy the running history of the device to consult the engineers when you have any trouble.
P46 Logs
Upgrade Firmware allows you to browse the new firmware in your computer and upgrade. Please do not power off
the device during upgrade.
27
P47 Firmware Upgrade
You are able to backup the current configuration to your PC and restore by applying the configuration file from
your PC.
And you can Reset and Reboot the device with just one click.
P48 System info
We can share the files in USB disk to public users through SAMBA server.
Storage/server functionality is available only in Gateway mode.
28
P49 SAMBA SERVER
The default IP address of SAMBA server is 192.168.188.253, input \\192.168.188.253 in your PC to run and search it,
picture showed as follow, click sure to confirm. Please make sure your computer has connected with the router.
P50 RUN
following picture will be showed, and then the files completely shared in this network.
P51 Files
29
In user part, you can change the password for Log in
P52 User Information
30
Chapter 5 Share Internet and Obtain IP address
automatically
Set computer’s TPC/IP as Obtain an IP address automatically, Obtain DNS server address automatically as
following picture showed.
the computer will obtain the IP address from router or base station to get Internet.
31
Chapter 6 Trouble Shooting
F 1 The Failure phenomenon and solution
Failure phenomenon
Solution
SYS Indicator off
Pls make sure you are using the right adapter according to the
instruction on product label
Can’t land to Wireless AP through Web
page
Pls check the IP address of computer and Wireless AP to see whether
they are in same networking segment, The method is click
“start”-“Run” input“cmd”，ping 192.168.188.253 to test the Wireless
AP connectivity.
Reset Wireless AP and load it again;
Pls make sure the IP address 192.168.188.253 is not occupied by
other device in Wireless AP’s networking;
Check computer and cable problem, recommend to use 10/100M
UTP unshielded cable;
Clean up Arp binding from “Start”-“Run” input“cmd” arp –d
Clean the IE Brower’s temporary files and Cache file。
Wireless AP can’t connect with AP
（the status display unconnected）
Try to scan the avaliable wireless networking again；
Make sure the Wireless AP’s wireless standard is correct；(2.4Ghz
signal should connect 2.4Ghz.)
The Security and passwords are matched between Wireless AP and
AP；
The signal strength of AP is too weak to connect, should be more
than -75dBm；
Can’t scan the wireless AP
Scan it several times more；
If using 5Ghz to scan, please make sure there are 5G signal existed.
Reset the Wireless AP, scan it again after Wireless AP restart；
The connection of Wireless AP and AP is
success, but the computer can’t share
internet
Pls Check the computer’s IP address and DNS setting. If it is
dynamin, set the network card as automatically obtain. If it is static
IP, pls contact with ISP for correct IP address and DNS address.
How to Reset Wireless AP
Press the “Reset” button more than 15 seconds after power on. The
Wireless AP will restore factory default after the Wireless AP restart.
32
Appendix A LICENSE STATEMENT / GPL
CODE STATEMENT
This product resp. the here
(http://global.level1.com/downloads.php?action=init) for
downloading offered software includes software code developed
by third parties, including software code subject to the GNU
General Public License Version 2 (“GPLv2”) and GNU Lesser
General Public License 2.1 („LGPLv2.1“).
WRITTEN OFFER FOR GPL/LGPL
SOURCE CODE
We will provide everyone upon request the applicable GPLv2 and
LGPLv2.1 source code files via CDROM or similar storage
medium for a nominal cost to cover shipping and media charges
as allowed under the GPLv2 and LGPLv2.1. This offer is valid for 3
years. GPLv2 and LGPLv2 inquiries: Please direct all GPL and
LGPL inquiries to the following address:
Digital Data Communications GmbH
Zeche-Norm-Str. 25
44319 Dortmund
33
Deutschland
Phone: +49 231 9075 - 0
Fax: +49 231 9075 - 184
Email: support@level1.com
Web: www.level1.com
NO WARRANTY
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License for more details.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR
AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES
34
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and
change free software--to make sure the software is free for all its
users. This General Public License applies to most of the Free
Software Foundation's software and to any other program whose
authors commit to using it. (Some other Free Software Foundation
software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that
35
you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code or
can get it if you want it, that you can change the software or use
pieces of it in new free programs; and that you know you can do
these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the
rights. These restrictions translate to certain responsibilities for you
if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get
the source code. And you must show them these terms so they
know their rights.
We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to
copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make
certain that everyone understands that there is no warranty for this
free software. If the software is modified by someone else and
passed on, we want its recipients to know that what they have is
36
not the original, so that any problems introduced by others will not
reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making
the program proprietary. To prevent this, we have made it clear
that any patent must be licensed for everyone's free use or not
licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS FOR
COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work which
contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The
"Program", below, refers to any such program or work, and a "work
based on the Program" means either the Program or any
derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or with
modifications and/or translated into another language. (Hereinafter,
37
translation is included without limitation in the term "modification".)
Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a work based on
the Program (independent of having been made by running the
Program). Whether that is true depends on what the Program
does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to the absence of
any warranty; and give any other recipients of the Program a copy
of this License along with the Program.
You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange
for a fee.
2. You may modify your copy or copies of the Program or any
portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of
38
Section 1 above, provided that you also meet all of these
conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any part
thereof, to be licensed as a whole at no charge to all third parties
under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these
conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally
print such an announcement, your work based on the Program is
not required to print an announcement.)
39
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate
works in themselves, then this License, and its terms, do not apply
to those sections when you distribute them as separate works. But
when you distribute the same sections as part of a whole which is
a work based on the Program, the distribution of the whole must be
on the terms of this Lic ense, whose permissions for other
licensees extend to the entire whole, and thus to each and every
part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the
Program with the Program (or with a work based on the Program)
on a volume of a storage or distribution medium does not bring the
other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms
of Sections 1 and 2 above provided that you also do one of the
following:
40
we use this doubled UL to get the sub-sections indented, while
making the bullets as unobvious as possible.
a) Accompany it with the complete corresponding
machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily
used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years,
to give any third party, for a charge no more than your cost of
physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed
only for noncommercial distribution and only if you received the
program in object code or executable form with such an offer, in
accord with Subsection b above.)
The source code for a work means the preferred form of the work
for making modifications to it. For an executable work, complete
41
source code means all the source code for all modules it contains,
plus any associated interface definition files, plus the scripts used
to control compilation and installation of the executable. However,
as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or
binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless
that component itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights,
from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify
42
or distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so,
and all its terms and conditions for copying, distributing or
modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on
the Program), the recipient automatically receives a license from
the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any
further restrictions on the recipients' exercise of the rights granted
herein. You are not responsible for enforcing compliance by third
parties to this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement
or otherwise) that contradict the conditions of this License, they do
not excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under
this License and any other pertinent obligations, then as a
consequence you may not distribute the Program at all. For
example, if a patent license would not permit royalty-free
43
redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could
satisfy both it and this License would be to refrain entirely from
distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended
to apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee
cannot impose that choice.
This section is intended to make thoroughly clear what is believed
to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
44
original copyright holder who places the Program under this
License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in
or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new
versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies a version number of this License which applies
to it and "any later version", you have the option of following the
terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does
not specify a version number of this License, you may choose any
version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the
author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision
will be guided by the two goals of preserving the free status of all
45
derivatives of our free software and of promoting the sharing and
reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF
CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE
PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE
COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW
OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER,
OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
46
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your
New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under
these terms.
To do so, attach the following notices to the program. It is safest to
attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at
least the "copyright" line and a pointer to where the full notice is
found.
one line to give the program's name and an idea of what it does.
Copyright (C) yyyy name of author
47
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.
Also add information on how to contact you by electronic and
paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type `show w'. This is free software, and you are welcome
to redistribute it under certain conditions; type `show c'
for details.
The hypothetical commands `show w' and `show c' should show
the appropriate parts of the General Public License. Of course, the
commands you use may be called something other than `show w'
and `show c'; they could even be mouse-clicks or menu
items--whatever suits your program.
You should also get your employer (if you work as a programmer)
or your school, if any, to sign a "copyright disclaimer" for the
program, if necessary. Here is a sample; alter the names:
48
Yoyodyne, Inc., hereby disclaims all copyright
interest in the program `Gnomovision'
(which makes passes at compilers) written
by James Hacker.
signature of Ty Coon, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your
program into proprietary programs. If your program is a subroutine
library, you may consider it more useful to permit linking
proprietary applications with the library. If this is what you want to
do, use the GNU Lesser General Public License instead of this
License.
Notification of Compliance
Europe - EU Declaration of Conformity
For complete DoC please visit
http://global.level1.com/downloads.php?action=init
GPL License Agreement
GPL may be included in this product, to view the GPL license agreement goes to
http://download.level1.com/level1/gpl/GPL.pdf
For GNU General Public License (GPL) related information, please visit
http://global.level1.com/downloads.php?action=init