Conventions.......................................................................................................................................................... 5

Product statements............................................................................................................................................. 5

Learning about the printer...........................................................................8

Finding information about the printer.............................................................................................................8

Selecting a location for the printer..................................................................................................................9

Printer conﬁgurations......................................................................................................................................... 11

Attaching cables.................................................................................................................................................. 11

Using the control panel.................................................................................................................................... 12

Understanding the status of the power button and indicator light.......................................................13

Loading paper and specialty media..........................................................14

Setting the size and type of the specialty media.......................................................................................14

Conﬁguring Universal paper settings........................................................................................................... 14

Loading trays....................................................................................................................................................... 14

Loading the multipurpose feeder.................................................................................................................. 16

Linking trays.........................................................................................................................................................17

Paper support.............................................................................................. 18

Supported paper sizes......................................................................................................................................18

Supported paper types.....................................................................................................................................19

Supported paper weights............................................................................................................................... 20

Printing......................................................................................................... 21

Printing from a computer..................................................................................................................................21

Printing from a mobile device......................................................................................................................... 21

Printing a font sample list................................................................................................................................22

Understanding the printer menus............................................................23

Menu map............................................................................................................................................................23

Device...................................................................................................................................................................23

Print.......................................................................................................................................................................30

Paper.....................................................................................................................................................................38

Network/Ports.................................................................................................................................................... 40

Contents 2

Reports..................................................................................................................................................................51

Troubleshooting..................................................................................................................................................51

Printing the Menu Settings Page...................................................................................................................52

Securing the printer................................................................................... 53

Locating the security slot................................................................................................................................ 53

Erasing printer memory................................................................................................................................... 53

Restoring factory default settings................................................................................................................. 54

Statement of Volatility...................................................................................................................................... 54

Maintaining the printer.............................................................................. 55

Networking..........................................................................................................................................................55

Cleaning the printer..........................................................................................................................................56

Ordering parts and supplies...........................................................................................................................57

Replacing parts and supplies.........................................................................................................................60

Moving the printer.............................................................................................................................................70

Saving energy and paper................................................................................................................................. 71

Recycling..............................................................................................................................................................72

Clearing jams...............................................................................................74

Avoiding jams..................................................................................................................................................... 74

Identifying jam locations..................................................................................................................................75

Paper jam in door A.......................................................................................................................................... 76

Paper jam in the rear door.............................................................................................................................. 79

Paper jam in the standard bin........................................................................................................................80

Paper jam in the duplex unit............................................................................................................................81

Paper jam in trays..............................................................................................................................................82

Paper jam in the multipurpose feeder......................................................................................................... 82

Troubleshooting..........................................................................................84

Network connection problems...................................................................................................................... 84

Issues with supplies..........................................................................................................................................85

Paper feed problems........................................................................................................................................ 87

Printing problems.............................................................................................................................................. 89

Contacting customer support........................................................................................................................116

Upgrading and migrating..........................................................................117

Hardware.............................................................................................................................................................117

Contents 3

Software............................................................................................................................................................. 122

Firmware.............................................................................................................................................................124

Notices........................................................................................................125

Index............................................................................................................137

Contents 4

Safety information

Conventions

Note: A note identiﬁes information that could help you.

Warning: A warning identiﬁes something that could damage the product hardware or software.

CAUTION: A caution indicates a potentially hazardous situation that could injure you.

Dierent types of caution statements include:

CAUTION—POTENTIAL INJURY: Indicates a risk of injury.

CAUTION—SHOCK HAZARD: Indicates a risk of electrical shock.

CAUTION—HOT SURFACE: Indicates a risk of burn if touched.

CAUTION—TIPPING HAZARD: Indicates a crush hazard.

CAUTION—PINCH HAZARD: Indicates a risk of being caught between moving parts.

Product statements

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily

accessible.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY: Do not use this product with extension cords, multioutlet power strips,

multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be easily

overloaded by a laser printer and may result in a risk of ﬁre, property damage, or poor printer

performance.

CAUTION—POTENTIAL INJURY: Only a Lexmark Inline Surge Protector that is properly connected

between the printer and the power cord provided with the printer may be used with this product. The

use of non-Lexmark surge protection devices may result in a risk of ﬁre, property damage, or poor

printer performance.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product near

water or wet locations.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a

lightning storm.

CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power

cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects

such as furniture and walls. If any of these things happen, a risk of ﬁre or electrical shock results. Inspect

the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet

before inspecting it.

Safety information 5

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, make sure that all external

connections (such as Ethernet and telephone system connections) are properly installed in their marked

plug-in ports.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn

the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any

other devices attached to the printer, then turn them o as well, and unplug any cables going into the

printer.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the

printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before

proceeding.

CAUTION—POTENTIAL INJURY: If the printer weight is greater than 18 kg (40 lb), then it requires two or

more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY: When moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•Make sure that all doors and trays are closed.

•Turn o the printer, and then unplug the power cord from the electrical outlet.

•Disconnect all cords and cables from the printer.

•If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect

them before moving the printer.

•If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over

thresholds and breaks in ﬂooring.

•If the printer does not have a caster base but is conﬁgured with optional trays or output options, then remove

the output options and lift the printer o the trays. Do not try to lift the printer and any options at the same

time.

•Always use the handholds on the printer to lift it.

•Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•Any cart used to move the hardware options must have a surface able to support the dimensions of the

options.

•Keep the printer in an upright position.

•Avoid severe jarring movements.

•Make sure that your ﬁngers are not under the printer when you set it down.

•Make sure that there is adequate clearance around the printer.

CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a

caster base, furniture, or other feature to prevent instability causing possible injury. For more information

on supported conﬁgurations, see www.lexmark.com/multifunctionprinters.

CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.

Keep all other trays closed until needed.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching it.

CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, use caution in areas marked with this

label. Pinch injuries may occur around moving parts, such as gears, doors, trays, and covers.

Safety information 6

CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or

performance of procedures other than those speciﬁed in the User’s Guide may result in hazardous

radiation exposure.

CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced.

There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble,

or incinerate a lithium battery. Discard used lithium batteries according to the manufacturer's instructions

and local regulations.

This product is designed, tested, and approved to meet strict global safety standards with the use of speciﬁc

manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer

is not responsible for the use of other replacement parts.

Refer service or repairs, other than those described in the user documentation, to a service representative.

This product uses a printing process that heats the print media, and the heat may cause the media to release

emissions. You must understand the section in your operating instructions that discusses the guidelines for

selecting print media to avoid the possibility of harmful emissions.

This product may produce small amounts of ozone during normal operation, and may be equipped with a ﬁlter

designed to limit ozone concentrations to levels well below the recommended exposure limits. To avoid high

ozone concentration levels during extensive usage, install this product in a well-ventilated area and replace

the ozone and exhaust ﬁlters if instructed to do so in the product maintenance instructions. If there are no

references to ﬁlters in the product maintenance instructions, then there are no ﬁlters requiring replacement for

this product.

SAVE THESE INSTRUCTIONS.

Safety information 7

Learning about the printer

Finding information about the printer

What are you looking for? Find it here

Initial setup instructions:

•Connecting the printer

•Installing the printer software

See the setup documentation that came with the

printer or go to http://support.lexmark.com.

More setup and instructions for using the printer:

•Selecting and storing paper and specialty media

•Loading paper

•Conﬁguring printer settings

•Viewing and printing documents and photos

•Setting up and using the printer software

•Conﬁguring the printer on a network

•Caring for and maintaining the printer

•Troubleshooting and solving problems

Information Center—Go to

http://infoserve.lexmark.com.

Help Menu Pages—Access the guides on the

printer ﬁrmware or go to

http://support.lexmark.com.

Touch Screen Guide—Go to

http://support.lexmark.com.

Product videos—Go to

http://infoserve.lexmark.com/idv/.

Information on setting up and conﬁguring the accessibility

features of your printer

Lexmark Accessibility Guide—Go to

http://support.lexmark.com.

Help using the printer software Help for Microsoft® Windows® or Macintosh

operating systems—Open a printer software

program or application, and then click Help.

Click

to view context‑sensitive information.

Notes:

•Help is automatically installed with the printer

software.

•Depending on the operating system, the

printer software is located in the printer

program folder or on the desktop.

Learning about the printer 8

What are you looking for? Find it here

The latest supplemental information, updates, and customer

support:

•Documentation

•Driver downloads

•Live chat support

•E‑mail support

•Voice support

Go to http://support.lexmark.com.

Note: Select your country or region, and then

select your product to view the appropriate

support site.

Support contact information for your country or

region can be found on the website or on the

printed warranty that came with the printer.

Have the following information ready when you

contact customer support:

•Place and date of purchase

•Machine type and serial number

•Safety information

•Regulatory information

•Warranty information

•Environmental information

Warranty information varies by country or region:

•In the U.S.—See the Statement of Limited

Warranty included with the printer, or go to

http://support.lexmark.com.

•In other countries and regions—See the

printed warranty that came with the printer.

Product Information Guide—See the

documentation that came with the printer or go to

http://support.lexmark.com.

Selecting a location for the printer

•Leave enough room to open trays, covers, and doors and to install hardware options.

•Set up the printer near an electrical outlet.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily

accessible.

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product

near water or wet locations.

Learning about the printer 9

•Make sure that airﬂow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical

Committee 156 standard.

•Provide a ﬂat, sturdy, and stable surface.

•Keep the printer:

–Clean, dry, and free of dust

–Away from stray staples and paper clips

–Away from the direct airﬂow of air conditioners, heaters, or ventilators

–Free from direct sunlight and humidity extremes

•Observe the recommended temperatures and avoid ﬂuctuations.

Ambient temperature 10 to 32°C (50 to 90°F)

Storage temperature 0 to 40°C (32 to 104°F)

•Allow the following recommended amount of space around the printer for proper ventilation:

1Top 305 mm (12 in.)

2Rear 100 mm (3.94 in.)

3Right side 110 mm (4.33 in.)

4Front 305 mm (12 in.)

Note: The minimum space needed in front of the printer is 76 mm (3 in.).

5Left side 65 mm (2.56 in.)

Learning about the printer 10

Printer conﬁgurations

CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a

caster base, furniture, or other feature to prevent instability causing possible injury. For more information

on supported conﬁgurations, see www.lexmark.com/multifunctionprinters.

CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.

Keep all other trays closed until needed.

You can conﬁgure your printer by adding optional 250‑ or 550‑sheet trays. For more information, see “Installing

optional trays” on page 121.

1Control panel

2Standard bin

3Controller board access cover

4Standard 250‑sheet tray

5Optional 250‑ or 550‑sheet tray

6Multipurpose feeder

7Door A

Attaching cables

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a

lightning storm.

Learning about the printer 11

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily

accessible.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the USB cable, any

wireless network adapter, or the printer in the areas shown while actively printing.

Use the To

1USB printer port Connect the printer to a computer.

2Power cord socket Connect the printer to an electrical outlet.

3Ethernet port Connect the printer to a network.

Using the control panel

Use the To

1Display View printing options, printer status, and error messages.

2Menus button Open the menus.

Learning about the printer 12

Use the To

3Power button Turn on or turn o the printer.

Note: To turn o the printer, press and hold the power button for ﬁve seconds.

4Stop or Cancel button Stop the current printer task.

5Indicator light Check the printer status.

6Back button Return to the previous screen.

7Right arrow button •Scroll through menus or move between screens and menu options.

•Increase the numeric value of a setting being displayed.

8Select button •Select menu options.

•Display available values or settings for a menu. An asterisk (*) indicates the

current default setting.

•Save settings.

9Left arrow button •Scroll through menus or move between screens and menu options.

•Decrease the numeric value of a setting being displayed.

Understanding the status of the power button and

indicator light

Indicator light Printer status

O The printer is o or in Hibernate mode.

Blue The printer is ready or processing data.

Red The printer requires user intervention.

Power button light Printer status

O The printer is o, ready, or processing data.

Solid amber The printer is in Sleep mode.

Blinking amber The printer is in Hibernate mode.

Learning about the printer 13

Loading paper and specialty media

Setting the size and type of the specialty media

1From the home screen, navigate to:

> Paper > > Tray Conﬁguration > > Paper Size/Type >

2Select a paper source, and then conﬁgure the size and type of the specialty media.

Conﬁguring Universal paper settings

1From the control panel, navigate to:

> Paper > > Media Conﬁguration > > Universal Setup >

2Select Portrait Width or Portrait Height, and then press .

3Adjust the settings, and then press .

Loading trays

CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.

Keep all other trays closed until needed.

1Remove the tray.

Note: To avoid paper jams, do not remove trays while the printer is busy.

Loading paper and specialty media 14

2Adjust the paper guides to match the size of the paper that you are loading.

3Flex, fan, and align the paper edges before loading.

4Load the paper stack with the printable side facedown, and then make sure that the side guides ﬁt snugly

against the paper.

Notes:

•Load letterhead facedown with the top edge of the sheet toward the front of the tray for one‑sided

printing.

•Load letterhead faceup with the bottom edge of the sheet toward the front of the tray for two‑sided

printing.

•Do not slide paper into the tray.

•To avoid paper jams, make sure that the stack height is below the maximum paper ﬁll indicator.

5Insert the tray.

If necessary, set the paper size and paper type from the control panel to match the paper loaded.

Loading paper and specialty media 15

Loading the multipurpose feeder

1Open the multipurpose feeder.

2Adjust the guide to match the size of the paper that you are loading.

3Flex, fan, and align the paper edges before loading.

4Load paper with the printable side faceup.

Notes:

•Load letterhead faceup with the top edge of the sheet toward the front of the tray for one‑sided

printing.

•Load letterhead facedown with the bottom edge of the sheet toward the front of the tray for

two‑sided printing.

•Load envelopes with the ﬂap facedown on the left side.

Loading paper and specialty media 16

•Load European envelopes with the ﬂap facedown and entering the printer ﬁrst.

Warning—Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings,

or self‑stick adhesives.

5From the control panel, set the paper size and paper type to match the paper loaded.

Linking trays

1Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the web page correctly.

2Click Settings > Paper > Tray Conﬁguration.

3Set the same paper size and paper type for the trays that you are linking.

4Save the settings.

5Click Settings > Device > Maintenance > Conﬁguration Menu > Tray Conﬁguration.

6Set Tray Linking to Automatic.

7Save the settings.

To unlink trays, make sure that no trays have the same paper size and paper type settings.

Warning—Potential Damage: The temperature of the fuser varies according to the speciﬁed paper type. To

avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.

Loading paper and specialty media 17

Paper support

Supported paper sizes

Paper size Tray Multipurpose feeder Two‑sided printing

210 x 297 mm (8.3 x 11.7 in.)

210 x 148 mm (5.8 x 8.3 in.)

A5 LEF*

148 x 210 mm (5.8 x 8.3 in.)

A6*

105 x 148 mm (4.1 x 5.8 in.)

JIS B5

182 x 257 mm (7.2 x 10.1 in.)

Oﬁcio (Mexico)

216 x 340 mm (8.5 x 13.4 in.)

Hagaki

100 x 148 mm (3.9 x 5.8 in.)

Statement

140 x 216 mm (5.5 x 8.5 in.)

Executive

184 x 267 mm (7.3 x 10.5 in.)

Letter

216 x 279 mm (8.5 x 11 in.)

Legal

216 x 356 mm (8.5 x 14 in.)

Folio

216 x 330 mm (8.5 x 13 in.)

Universal

76.2 x 127 mm (3 x 5 in.) to

216 x 356 mm (8.5 x 14 in.)

7 3/4 Envelope (Monarch)

98 x 191 mm (3.9 x 7.5 in.)

9 Envelope

98 x 225 mm (3.9 x 8.9 in.)

10 Envelope

105 x 241 mm (4.1 x 9.5 in.)

* This paper size is not supported in the optional tray.

Paper support 18

Paper size Tray Multipurpose feeder Two‑sided printing

DL Envelope

110 x 220 mm (4.3 x 8.7 in.)

C5 Envelope

162 x 229 mm (6.4 x 9 in.)

B5 Envelope

176 x 250 mm (6.9 x 9.8 in.)

Other Envelope

76.2 x 127 mm (3 x 5 in.) to

216 x 356 mm (8.5 x 14 in.)

* This paper size is not supported in the optional tray.

Supported paper types

Paper type Tray Multipurpose feeder Two‑sided printing

Plain paper

Card stock X X

Transparency X

Recycled

Paper labels1X

Bond2

Letterhead

Preprinted

Colored Paper

Light Paper

Heavy Paper2

Rough/Cotton

Envelope X X

1 One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print

20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two‑sided labels are not supported.

2 Bond and Heavy Paper are supported in two‑sided printing up to 90‑g/m2 (24‑lb) paper weight.

Paper support 19

Paper type Tray Multipurpose feeder Two‑sided printing

Rough envelope X X

1 One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print

20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two‑sided labels are not supported.

2 Bond and Heavy Paper are supported in two‑sided printing up to 90‑g/m2 (24‑lb) paper weight.

Supported paper weights

Tray Multipurpose feeder Two‑sided printing

Paper weight 60–120 g/m2 (16–32 lb) 60–216 g/m2 (16–58 lb) 60–90 g/m2 (16–24 lb)

Paper support 20

Printing

Printing from a computer

Note: For labels, card stock, and envelopes, set the paper size and type in the printer before printing the

document.

1From the document that you are trying to print, open the Print dialog.

2If necessary, adjust the settings.

3Print the document.

Printing from a mobile device

Printing from a mobile device using Lexmark Mobile Print

LexmarkTM Mobile Print allows you to send documents and images directly to a supported Lexmark printer.

1Open the document, and then send or share the document to Lexmark Mobile Print.

Note: Some third‑party applications may not support the send or share feature. For more information, see

the documentation that came with the application.

2Select a printer.

3Print the document.

Printing from a mobile device using Google Cloud Print

Google Cloud PrintTM is a mobile printing service that allows enabled applications on mobile devices to print

to any Google Cloud Print‑ready printer.

1From the home screen of your mobile device, launch an enabled application.

2Tap Print, and then select a printer.

3Print the document.

Printing from a mobile device using Mopria Print Service

Mopria® Print Service is a mobile printing solution for mobile devices running on Android version 4.4 or later. It

allows you to print directly to any Mopria‑certiﬁed printer.

Note: Before printing, make sure that the Mopria Print Service is enabled.

1From the home screen of your mobile device, launch a compatible application.

2Tap Print, and then select a printer.

3Print the document.

Printing 21

Printing from a mobile device using AirPrint

AirPrint is a mobile printing solution that allows you to print directly from Apple devices to an AirPrint‑certiﬁed

printer.

Note: This application is supported only in some Apple devices.

1From the home screen of your mobile device, launch a compatible application.

2Select an item to print, and then tap the share icon.

3Tap Print, and then select the printer.

4Send the print job.

Printing a font sample list

1From the control panel, navigate to:

> Reports > > Print > > Print Fonts

2Select PCL Fonts or PostScript Fonts, and then press .

Printing 22

Understanding the printer menus

Menu map

Device •Preferences

•Remote Operator Panel

•Notiﬁcations

•Power Management

•Information Sent to Lexmark

•Restore Factory Defaults

•Maintenance

•About This Printer

Print •Layout

•Setup

•Quality

•Job Accounting

•XPS

•PDF

•PostScript

•PCL

•HTML

•Image

Paper •Tray Conﬁguration •Media Conﬁguration

Network/Ports •Network Overview

•Wireless

•Ethernet

•TCP/IP

•SNMP

•IPSec

•802.1x

•LPD Conﬁguration

•HTTP/FTP Settings

•ThinPrint

•USB

•Google Cloud Print

•Wi‑Fi Direct

Reports •Menu Settings Page

•Device

•Print

•Network

Troubleshooting •Print Quality Test Pages

Device

Preferences

Menu item Description

Display Language

[List of languages]

Set the language of the text that appears on the display.

Country/Region

[List of countries]

Identify the country or region where the printer is conﬁgured

to operate.

Run Initial Setup

Ye s

Run the setup wizard.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 23

Menu item Description

Displayed information

Display Text 1

Display Text 2

Specify the information to appear on the home screen.

Date and Time

Conﬁgure

Current Date and Time

Manually Set Date and Time

Network Time Protocol

Enable NTP

NTP Server

Conﬁgure the printer date and time.

Paper Sizes

U.S.*

Metric

Specify the unit of measurement for paper sizes.

Note: The country or region selected in the initial setup

wizard determines the initial paper size setting.

Screen Timeout

10–300 (60*)

Set the idle time in seconds before the display shows the home

screen, or before the printer logs o a user account

automatically.

Note: An asterisk (*) next to a value indicates the factory default setting.

Remote Operator Panel

Menu item Description

External VNC Connection

Don’t Allow*

Allow

Connect an external Virtual Network Computing (VNC) client

to the remote control panel.

Authentication Type

None*

Standard Authentication

Set the authentication type when accessing the VNC client

server.

VNC Password Specify the password to connect to the VNC client server.

Note: This menu item appears only if Authentication Type is

set to Standard Authentication.

Note: An asterisk (*) next to a value indicates the factory default setting.

Notiﬁcations

Menu item Description

Supplies

Show Supply Estimates

Show estimates*

Do not show estimates

Show the estimated supply status information.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 24

Menu item Description

Error Prevention

Auto Continue

Disabled

5–255 (5*)

Let the printer continue processing or printing a job

automatically after clearing certain attendance conditions.

Error Prevention

Jam Assist

O

On*

Set the printer to check for jammed paper automatically.

Error Prevention

Auto Reboot

Reboot always*

Reboot never

Reboot when idle

Set the printer to restart when an error occurs.

Error Prevention

Auto Reboot

Max Auto Reboots

1–20 (2*)

Set the number of automatic reboots that the printer can

perform.

Error Prevention

Auto Reboot

Auto Reboot Window

1–525600 (720*)

Set the number of seconds before the printer performs an

automatic reboot.

Error Prevention

Auto Reboot

Auto Reboot Counter

Show a read‑only information of the reboot counter.

Error Prevention

Display Short Paper Error

Auto‑clear*

Set the printer to show a message when a short paper error

occurs.

Note: Short paper refers to the size of the paper loaded.

Error Prevention

Page Protect

O*

Set the printer to process the entire page into the memory

before printing it.

Jam Content Recovery

Jam Recovery

O

Auto*

Set the printer to reprint jammed pages.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 25

Power Management

Menu item Description

Sleep Mode Proﬁle

Print with Display o

Allow printing with display o*

Display on when printing

Allow printing with the display turned o.

Timeouts

Sleep Mode

1–120 minutes (15*)

Set the idle time before the printer begins operating in Sleep

mode.

Timeouts

Hibernate Timeout

Disabled

1 hour

2 hours

3 hours

6 hours

1 day

2 days

3 days*

1 week

2 weeks

1 month

Set the time before the printer enters Hibernate mode.

Timeouts

Hibernate Timeout on Connection

Hibernate

Do Not Hibernate*

Set the printer to Hibernate mode even when an active

Ethernet connection exists.

Eco-Mode

O*

Energy

Energy/Paper

Paper

Minimize the use of energy, paper, or specialty media.

Note: Setting Eco‑Mode to Energy or Paper may aect

printer performance, but not print quality.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 26

Information Sent to Lexmark

Menu item Description

Information Sent to Lexmark

Save

Supplies and Page Usage (Anonymous)

Device Performance (Anonymous)

Device Interaction (Anonymous)

None of the Above*

More Information

Send printer usage and performance information to Lexmark.

Note: Information Send Time and User Information ‑ Level appear

only when you select any of the settings in Information Sent to

Lexmark, except None of the Above.

Information Send Time

Start Time

Stop Time

User Information ‑ Level

Anonymous Session Information Only*

Session Information with Generic User

Information

Session Information with Actual User IDs

Note: An asterisk (*) next to a value indicates the factory default setting.

Restore Factory Defaults

Menu item Description

Restore Settings

Restore all settings

Restore printer settings

Restore network settings

Restore the printer factory default settings.

Maintenance

Conﬁg Menu

Menu item Description

USB Conﬁguration

USB PnP

Change the USB driver mode of the printer to improve its

compatibility with a personal computer.

USB Conﬁguration

USB Speed

Full

Auto*

Set the USB port to run at full speed and disable its high‑speed

capabilities.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 27

Menu item Description

Tray Conﬁguration

Tray Linking

Automatic*

O

Set the printer to link the trays that have the same paper type

and paper size settings.

Tray Conﬁguration

Show Tray Insert Message

O

Only for unknown sizes*

Always

Show the Tray Insert message.

Tray Conﬁguration

A5 Loading

Short Edge*

Long Edge

Specify the page orientation when loading A5‑size paper.

Tray Conﬁguration

Paper Prompts

Auto*

Multipurpose Feeder

Manual Paper

Envelope Prompts

Auto*

Multipurpose Feeder

Manual Envelope

Set the paper source that the user ﬁlls when a prompt to load

paper or envelope appears.

Note: For Multipurpose Feeder to appear, set Conﬁgure MP

to Cassette from the Paper menu.

Tray Conﬁguration

Action for Prompts

Prompt user*

Continue

Use current

Set the printer to resolve paper- or envelope-related change

prompts.

Reports

Menu Settings Page

Event Log

Event Log Summary

HealthCheck Statistics

Print reports about printer menu settings, printer events, and

event logs.

Supply Usage And Counters

Clear Supply Usage History

Reset Maintenance Counter

Reset the supply page counter or view the total printed pages.

Printer Emulations

PPDS Emulation

O*

Set the printer to recognize and use the PPDS data stream.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 28

Menu item Description

Print Conﬁguration

Font Sharpening

0–150 (24*)

Set a text point-size value below which the high‑frequency

screens are used when printing font data.

For example, if the value is 24, then all fonts sized 24 points or

less use the high‑frequency screens.

Print Conﬁguration

Print Density

1–5 (3*)

Adjust the toner density when printing or copying documents.

Device Operations

Quiet Mode

O*

Set the amount of noise that the printer produces.

Note: Enabling this setting slows the printer performance.

Device Operations

Panel Menus

O

On*

Enable access to the control panel menus.

Device Operations

Safe Mode

O*

Set the printer to operate in a special mode, in which it attempts

to continue oering as much functionality as possible, despite

known issues.

For example, when set to On, and the duplex motor is

nonfunctional, the printer performs one‑sided printing of the

documents even if the job is two‑sided printing.

Device Operations

Clear Custom Status

O

On*

Erase user‑deﬁned strings for the Default or Alternate custom

messages.

Device Operations

Clear all remotely‑installed messages

Erase messages that were remotely installed.

Device Operations

Automatically Display Error Screens

On*

O

Show existing error messages on the display after the printer

remains inactive on the home screen for a length of time equal

to the Screen Timeout setting.

Device Operations

Custom Supply Levels

O*

Let printservice read and edit values from the Embedded Web

Server.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 29

Out of Service Erase

Menu item Description

Erase Printer Memory

Printer Memory Last Sanitized

Sanitize all information on non‑volatile memory

Clear all settings and applications that are stored in the printer

hard disk.

About this Printer

Menu item Description

Asset Tag Show the serial number of the printer.

Printer’s Location Identify the printer location. The maximum length is 63 characters.

Contact Personalize the printer name. The maximum length is 63 characters.

Layout

Menu item Description

Sides

1‑sided*

2‑sided

Specify whether to print on one side or two sides of the paper.

Flip Style

Long Edge*

Short Edge

Determine which side of the paper (long edge or short edge) is bound when

performing two‑sided printing.

Note: Depending on the option selected, the printer automatically osets

each printed information of the page to bind the job correctly.

Blank Pages

Do Not Print*

Print blank pages that are included in a print job.

Collate

O [1,1,1,2,2,2]*

On [1,2,1,2,1,2]

Keep the pages of a print job stacked in sequence, particularly when printing

multiple copies of the job.

Separator Sheets

None*

Between Copies

Between Jobs

Between Pages

Insert blank separator sheets when printing.

Separator Sheet Source

Tray [x] (1*)

Multipurpose Feeder

Specify the paper source for the separator sheet.

Note: The multipurpose feeder is available only in some printer models.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 30

Menu item Description

Pages per Side

O*

2 pages per side

3 pages per side

4 pages per side

6 pages per side

9 pages per side

12 pages per side

16 pages per side

Print multiple page images on one side of a sheet of paper.

Pages per Side Ordering

Horizontal*

Reverse Horizontal

Vertical

Reverse Vertical

Specify the positioning of multiple page images when using Pages per Side.

Note: The positioning depends on the number of page images and their

page orientation.

Pages per Side Orientation

Auto*

Landscape

Portrait

Specify the orientation of a multiple‑page document when using Pages per

Side.

Pages per Side Border

None*

Solid

Print a border around each page image when using Pages per Side.

Copies

1–9999 (1*)

Specify the number of copies for each print job.

Print Area

Normal*

Fit to page

Whole Page

Set the printable area on a sheet of paper.

Note: An asterisk (*) next to a value indicates the factory default setting.

Setup

Menu item Description

Printer Language

PCL Emulation*

PS Emulation

Set the printer language.

Note: Setting a default printer language does not prevent a software

program from sending print jobs that use another printer language.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 31

Menu item Description

Resource Save

O*

Set the printer to handle temporary downloads when it receives a job that

requires more than the available memory.

Notes:

•O sets the printer to retain downloads only until memory is needed.

Downloads are deleted to process print jobs.

•When set to On and the printer runs out of memory, a Memory

Full [38] appears on the display but downloads are not deleted.

Note: An asterisk (*) next to a value indicates the factory default setting.

Quality

Menu item Description

Print Resolution

600 dpi*

1200 Image Q

2400 Image Q

1200 dpi

300 dpi

Set the resolution for the text and images on the printed output.

Note: Resolution is determined in dots per inch or image quality.

Pixel Boost

O*

Fonts

Horizontally

Vertically

Both directions

Enable more pixels to print in clusters for clarity, in order to enhance text and

images.

Toner Darkness

1–10 (8*)

Determine the lightness or darkness of text images.

Halftone

Normal*

Detail

Enhance the printed output to have smoother lines with sharper edges.

Brightness

‑6 to 6 (0*)

Adjust the brightness of the printed output.

Contrast

0 to 5 (0*)

Adjust the contrast of the printed output.

Gray Correction

O

Auto*

Adjust the contrast enhancement applied to images.

Note: An asterisk (*) next to a value indicates the factory default setting.

Job Accounting

Note: This menu appears only when a printer hard disk is installed.

Understanding the printer menus 32

Menu item Description

Job Accounting

O*

Set the printer to create a log of the print jobs that it receives.

Accounting Log Frequency

Daily

Weekly

Monthly*

Specify how often the printer creates a log ﬁle.

Log Action at End of Frequency

None*

E‑mail Current Log

E‑mail & Delete Current Log

Post Current Log

Post & Delete Current Log

Specify how the printer responds when the frequency threshold expires.

Note: The value deﬁned in Accounting Log Frequency determines when this

action is triggered.

Log Near Full Level

O*

Specify the maximum size of the log ﬁle before the printer executes the Log

Action at Near Full.

Log Action at Near Full

None*

E‑mail Current Log

E‑mail & Delete Current Log

E‑mail & Delete Oldest Log

Post Current Log

Post & Delete Current Log

Post & Delete Oldest Log

Delete Current Log

Delete Oldest Log

Delete All But Current

Delete All Logs

Specify how the printer responds when the hard disk is nearly full.

Note: The value deﬁned in Log Near Full Level determines when this action

is triggered.

Log Action at Full

None*

E‑mail & Delete Current Log

E‑mail & Delete Oldest Log

Post & Delete Current Log

Post & Delete Oldest Log

Delete Current Log

Delete Oldest Log

Delete All But Current

Delete All Logs

Specify how the printer responds when disk usage reaches the maximum limit

(100MB).

URL to Post Log Specify where the printer posts job accounting logs.

E‑mail Address to Send Logs Specify the e‑mail address to which the printer sends job accounting logs.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 33

Menu item Description

Log File Preﬁx Specify the preﬁx for the log ﬁle name.

Note: The current host name deﬁned in the TCP/IP menu is used as the

default log ﬁle preﬁx.

Note: An asterisk (*) next to a value indicates the factory default setting.

XPS

Menu item Description

Print Error Pages

O*

Print a test page that contains information on errors, including XML markup

errors.

Minimum Line Width

1–30 (2*)

Set the minimum stroke width of any job printed in 1200 dpi.

Note: An asterisk (*) next to a value indicates the factory default setting.

PDF

Menu item Description

Scale to Fit

O*

Scale the page content to ﬁt the selected paper size.

Annotations

Do Not Print*

Specify whether to print annotations in the PDF.

Note: An asterisk (*) next to a value indicates the factory default setting.

PostScript

Menu item Description

Print PS Error

O*

Print a test page that contains the PostScript error.

Minimum Line Width

1–30 (2*)

Set the minimum stroke width of any job printed in 1200 dpi.

Lock PS Startup Mode

O*

Disable the SysStart ﬁle.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 34

Menu item Description

Font Priority

Resident*

Flash/Disk

Establish the font search order.

Notes:

•Resident sets the printer to search its memory for the requested font

before searching the ﬂash memory.

•Flash/Disk sets the printer to search the ﬂash memory for the

requested font before searching the printer memory.

•This menu item appears only when a ﬂash memory is installed.

Wait Timeout

Disabled

15–65535 (40*)

Set the printer to wait for additional data before canceling a print job.

Note: An asterisk (*) next to a value indicates the factory default setting.

PCL

Menu item Description

Font Source

Resident*

All

Choose the source which contains the default font selection.

Font Name

[List of available fonts]

Select a font from the speciﬁed font source.

Symbol Set

[List of available symbol set]

Specify the symbol set for each font name.

Note: A symbol set is a set of alphabetic and numeric characters,

punctuation, and special symbols. Symbol sets support the dierent

languages or speciﬁc programs such as math symbols for scientiﬁc text.

Pitch

0.08–100 (10*)

Specify the font pitch for scalable monospaced fonts.

Note: Pitch refers to the number of ﬁxed‑space characters in a horizontal

inch of type.

Orientation

Portrait*

Landscape

Specify the orientation of text and graphics on the page.

Lines per Page

1–255

Specify the number of lines of text for each page printed through the PCL®

datastream.

Notes:

•This menu item activates vertical escapement that causes the

selected number of requested lines to print between the default

margins of the page.

•60 is the U.S. factory default setting. 64 is the international factory

default setting.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 35

Menu item Description

PCL5 Minimum Line Width

1–30 (2*)

Set the initial minimum stroke width.

Notes:

•Jobs printed in 1200 dpi use the value directly.

•Jobs printed in 4800CQ use half the value.

PCLXL Minimum Line Width

1–30 (2*)

A4 Width

198 mm*

203 mm

Set the width of the logical page on A4‑size paper.

Note: Logical page is the space on the physical page where data is

printed.

Auto CR after LF

O*

Set the printer to perform a carriage return after a line feed control

command.

Note: Carriage return is a mechanism that commands the printer to move

the position of the cursor to the ﬁrst position on the same line.

Auto LF after CR

O*

Set the printer to perform a line feed after a carriage return control

command.

Tray Renumber

Assign MP Feeder

O*

None

0–201

Assign Tray [x]

O*

None

0–201

Assign Manual Paper

O*

None

0–201

Assign Manual Envelope

O*

None

0–201

Conﬁgure the printer to work with print drivers or applications that use

dierent source assignments for the paper source.

Tray Renumber

View Factory Defaults

Show the factory default setting assigned for each paper source.

Tray Renumber

Restore Defaults

Return all tray assignments to factory default values.

Print Timeout

Disabled

1–255 (90*)

Set the printer to end a print job after it has been idle for the speciﬁed

amount of time in seconds.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 36

HTML

Menu item Description

Font Name

[List of fonts] (Times*)

Set the font to use for HTML documents.

Font Size

1–255 (12*)

Set the font size to use for HTML documents.

Scale

1–400% (100*)

Scale HTML documents.

Orientation

Portrait*

Landscape

Set the page orientation for HTML documents.

Margin Size

8–255 mm (19*)

Set the page margin for HTML documents.

Backgrounds

Do Not Print

Print*

Print background information or graphics for HTML documents.

Note: An asterisk (*) next to a value indicates the factory default setting.

Image

Menu item Description

Auto Fit

O

On*

Select the best available paper size and orientation setting for an image.

Note: When set to On, this menu item overrides the scaling and orientation

settings for the image.

Invert

O*

Invert bitonal monochrome images.

Note: This menu item does not apply to GIF or JPEG image formats.

Scaling

Best Fit*

Anchor Top Left

Anchor Center

Fit Height/Width

Fit Height

Fit Width

Adjust the image to ﬁt the printable area.

Note: When Auto Fit is set to On, Scaling is automatically set to Best Fit.

Orientation

Portrait*

Landscape

Reverse Portrait

Reverse Landscape

Specify the orientation of text and graphics on the page.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 37

Paper

Tray Conﬁguration

Menu item Description

Default Source

Tray [x] (1*)

MP Feeder

Manual Paper

Manual Envelope

Set the paper source for all print jobs.

Note: Multipurpose Feeder only appears when Conﬁgure MP is set to

Cassette.

Paper Size/Type

Tray [x]

MP Feeder

Manual Paper

Manual Envelope

Specify the paper size or paper type loaded in each paper source.

Substitute Size

O

Statement/A5

Letter/A4

All Listed*

Set the printer to substitute a speciﬁed paper size if the requested size is not

loaded in any paper source.

Notes:

•O prompts the user to load the required paper size.

•Statement/A5 prints A5‑size document on statement when loading

statement and statement‑size jobs on A5 paper size when loading A5.

•Letter/A4 prints A4‑size document on letter when loading letter and

letter‑size jobs on A4 paper size when loading letter.

•All Listed substitutes Letter/A4.

Conﬁgure MP

Cassette*

Manual

First

Set the printer when to pick paper loaded in the multipurpose feeder.

Notes:

•When set to Cassette, the printer treats the multipurpose feeder like a

tray.

•When set to Manual, the printer treats the multipurpose feeder like a

manual feeder.

•When set to First, the printer picks paper from the multipurpose feeder

until it is empty, regardless of the required paper source or paper size.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 38

Media Conﬁguration

Universal Setup

Menu item Description

Units of Measure

Inches

Millimeters

Specify the unit of measurement for the universal paper.

Note: Inches is the U.S. factory default setting. Millimeters is the

international factory default setting.

Portrait Width

3–14.17 inches (8.50*)

76–359.91 mm (216*)

Set the portrait width of the universal paper.

Portrait Height

3–14.17 inches (14*)

76–359.91 mm (356*)

Set the portrait height of the universal paper.

Feed Direction

Short Edge*

Long Edge

Set the printer to pick paper from the short edge or long edge

direction.

Note: Long Edge appears only when the longest edge is shorter

than the maximum width supported.

Note: An asterisk (*) next to a value indicates the factory default setting.

Media Types

Menu item Description

Plain

Card Stock

Transparency

Recycled

Labels

Bond

Envelope

Rough Envelope

Letterhead

Preprinted

Colored Paper

Light

Heavy

Rough/Cotton

Custom Type [x]

Specify the texture and weight of the paper loaded.

Select from the following options:

Paper Texture

Smooth

Normal*

Rough

Paper Weight

Light

Normal*

Heavy

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 39

Network/Ports

Network Overview

Menu item Description

Active Adapter

Auto*

Standard Network

Specify how a network is connected.

Network Status Show the connection status of the printer network.

Display Network Status on

Printer

On*

O

Show the network status on the display.

Speed, Duplex Show the speed of the currently active network card.

IPv4 Show the IPv4 address.

All IPv6 Addresses Show all IPv6 addresses.

Reset Print Server Reset all active network connections to the printer.

Note: This setting removes all network conﬁguration settings.

Network Job Timeout

O

On* (90 seconds)

Set the time before the printer cancels a network print job.

Banner Page

O*

Print a banner page.

Note: An asterisk (*) next to a value indicates the factory default setting.

Wireless

Note: This menu is available only in printers connected to a Wi‑Fi network or printers that have a wireless

network adapter.

Menu item Description

Setup Using Mobile App Conﬁgure the Wi‑Fi connection using Lexmark Mobile Assistant.

Understanding the printer menus 40

Menu item Description

Setup On Printer Panel

Choose Network

Add Wi‑Fi Network

Network Name

Network Mode

Infastructure

Wireless Security Mode

Disabled*

WEP

WPA2/WPA - Personal

WPA2 - Personal

802.1x - RADIUS

Conﬁgure the Wi‑Fi connection using the control panel.

Note: 802.1x - RADIUS can be conﬁgured only from the Embedded

Web Server.

Wi‑Fi Protected Setup

WPS Auto Detect

O

On*

Start Push Button Method

Start PIN Method

Establish a Wi‑Fi network and enable network security.

Notes:

•WPS Auto Detect appears only when the Wireless Security

Mode is set to WEP.

•Start Push-Button Method connects the printer to a Wi‑Fi

network when buttons on both the printer and the access point

(wireless router) are pressed within a given time.

•Start PIN Method connects the printer to a Wi‑Fi network when

a PIN on the printer is entered into the wireless settings of the

access point.

Network Mode

BSS Type

Infrastructure*

Specify the network mode.

Enable Wi‑Fi Direct

O*

Enable Wi-Fi Direct‑capable devices to connect directly to the printer.

Compatibility

802.11b/g/n (2.4GHz)*

802.11a/b/g/n/ac (2.4GHz/5GHz)

802.11a/n/ac (5GHz)

Specify the standard for the Wi‑Fi network.

Note: 802.11a/b/g/n/ac (2.4GHz/5GHz) and 802.11a/n/ac (5GHz) only

appear when a Wi‑Fi option is installed.

Wireless Security Mode

Disabled*

WEP

WPA2/WPA-Personal

WPA2-Personal

802.1x - RADIUS

Set the security mode for connecting the printer to Wi‑Fi devices.

Note: 802.1x - RADIUS can be conﬁgured only from the Embedded

Web Server.

WEP Authentication Mode

Auto*

Open

Shared

Set the type of Wireless Encryption Protocol (WEP) for the printer.

Note: This menu item appears only when the Wireless Security

Mode is set to WEP.

Set WEP Key Specify a WEP password for secure Wi‑Fi connection.

Understanding the printer menus 41

Menu item Description

WPA2/WPA Personal

AES

Enable Wi‑Fi security through Wi-Fi Protected Access (WPA).

Note: This menu item appears only when the Wireless Security

Mode is set to WPA2/WPA-Personal.

Set Pre‑Shared Key Set the password for secure Wi‑Fi connection.

WPA2-Personal

AES

Enable Wi‑Fi security through WPA2.

Note: This menu item appears only when the Wireless Security

Mode is set to WPA2-Personal.

802.1x Encryption Mode

WPA+

WPA2*

Enable Wi‑Fi security through 802.1x standard.

Notes:

•This menu item appears only when the Wireless Security Mode

is set to 802.1x - RADIUS.

•802.1x - RADIUS can be conﬁgured only from the Embedded

Web Server.

IPv4

Enable DHCP

On*

O

Set Static IP Address

IP Address

Netmask

Gateway

Enable and conﬁgure IPv4 settings in the printer.

IPv6

Enable IPv6

On*

O

Enable DHCPv6

O*

Stateless Address Autoconﬁguration

On*

O

DNS Server Address

Manually Assigned IPv6 Address

Manually Assigned IPv6 Router

Address Preﬁx

All IPv6 Addresses

All IPv6 Router Addresses

Enable and conﬁgure IPv6 settings in the printer.

Network Address

UAA

LAA

View the network addresses.

Understanding the printer menus 42

Menu item Description

PCL SmartSwitch

O

On*

Set the printer to switch automatically to PCL emulation when a print

job requires it, regardless of the default printer language.

Note: If PCL SmartSwitch is o, then the printer does not examine

incoming data and uses the default printer language speciﬁed in

the Setup menu.

PS SmartSwitch

O

On*

Set the printer to switch automatically to PS emulation when a print

job requires it, regardless of the default printer language.

Note: If PS SmartSwitch is o, then the printer does not examine

incoming data and uses the default printer language speciﬁed in

the Setup menu.

Job Buering

O*

Temporarily store print jobs in the printer hard disk before printing.

Note: This menu item appears only when a hard disk is installed.

Mac Binary PS

Auto*

O

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

•On processes raw binary PostScript print jobs.

•O ﬁlters print jobs using the standard protocol.

Ethernet

Menu item Description

Network Speed Show the speed of an active network adapter.

IPv4

Enable DHCP

On*

O

Enable Dynamic Host Conﬁguration Protocol (DHCP).

Note: DHCP is a standard protocol that allows a server to dynamically

distribute IP addressing and conﬁguration information to clients.

IPv4

Set Static IP Address

IP Address

Netmask

Gateway

Set the static IP address of your printer.

Enable IPv6

On*

O

Conﬁgure IPv6 in the printer.

Enable DHCPv6

O*

Run DHCPv6 in an IPv6 network.

Stateless Address

Autoconﬁguration

On*

O

Set the network adapter to accept the automatic IPv6 address conﬁguration

entries provided by a router.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 43

Menu item Description

DNS Address Specify the DNS server address, IP address, and the router for IPv6 network.

Manually Assigned IPv6 Address

Manually Assigned IPv6 Router

Address Preﬁx

0–128 (64*)

All IPv6 Addresses Show all IP and router addresses used in an IPv6 network.

All IPv6 Router Addresses

Network Address

UAA

LAA

Show the printer Media Access Control (MAC) addresses: Locally Administered

Address (LAA) and Universally Administered Address (UAA).

Note: You can change the printer LAA manually.

PCL SmartSwitch

On*

O

Set the printer to switch automatically to PCL emulation when a print job

requires it, regardless of the default printer language.

Note: If PCL SmartSwitch is o, then the printer does not examine incoming

data and uses the default printer language speciﬁed in the Setup menu.

PS SmartSwitch

On*

O

Set the printer to switch automatically to PS emulation when a print job requires

it, regardless of the default printer language.

Note: If PS SmartSwitch is o, then the printer does not examine incoming

data and uses the default printer language speciﬁed in the Setup menu.

Mac Binary PS

Auto*

O

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

•On processes raw binary PostScript print jobs.

•O ﬁlters print jobs using the standard protocol.

Energy Ecient Ethernet

On*

O

Reduce power consumption when the printer receives no data from the

Ethernet network.

Note: An asterisk (*) next to a value indicates the factory default setting.

TCP/IP

Note: This menu appears only in network printers or printers attached to print servers.

Menu item Description

Set Hostname Set the current TCP/IP host name.

Domain Name Set the domain name.

Allow DHCP/BOOTP to update

NTP server

On*

O

Allow the DHCP and BOOTP clients to update the NTP settings of the printer.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 44

Menu item Description

Zero Conﬁguration Name Specify a service name for the zero conﬁguration network.

Enable Auto IP

On*

O

Assign an IP address automatically.

DNS Address Specify the current Domain Name System (DNS) server address.

Backup DNS Address Specify the backup DNS server addresses.

Backup DNS Address 2

Backup DNS Address 3

Domain Search Order Specify a list of domain names to locate the printer and its resources that reside

in dierent domains on the network.

Enable DDNS

On*

O

Update Dynamic DNS settings.

DDNS TTL Specify the current DDNS settings.

Default TTL

DDNS Refresh Time

Enable mDNS

O

On*

Update multicast DNS settings.

WINS Address Specify a server address for Windows Internet Name Service (WINS).

Enable BOOTP

O*

Allow the BOOTP to assign a printer IP address.

Restricted Server List Specify an IP address for the TCP connections.

Notes:

•Use a comma to separate each IP address.

•You can add up to 50 IP addresses.

Restricted Server List Options

Block All Ports*

Block Printing Only

Block Printing and HTTP Only

Specify how the IP addresses in the list can access the printer functionality.

MTU Specify a maximum transmission unit (MTU) parameter for the TCP connections.

Raw Print Port

1–65535 (9100*)

Specify a raw port number for printers connected on a network.

Outbound Trac Maximum

Speed

O*

100 to 1000000

Enable the printer maximum transfer rate.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 45

Menu item Description

Enhanced TLS Security

O*

Enhance printer privacy and data integrity.

Note: An asterisk (*) next to a value indicates the factory default setting.

SNMP

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item Description

SNMP Versions 1 and 2c

Enabled

O

On*

Allow SNMP Set

O

On*

Enable PPM MIB

O

On*

SNMP Community

Conﬁgure Simple Network Management Protocol (SNMP) versions 1

and 2c to install print drivers and applications.

SNMP Version 3

Enabled

O

On*

Set Read/Write Credentials

User Name

Password

Set Read‑only Credentials

User Name

Password

Authentication Hash

MD5

SHA1*

Minimum Authentication Level

No Authentication, No Privacy

Authentication, No Privacy

Authentication, Privacy*

Privacy Algorithm

DES

AES‑128*

Conﬁgure SNMP version 3 to install and update the printer security.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 46

IPSec

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item Description

Enable IPSec

O*

Enable Internet Protocol Security (IPSec).

Base Conﬁguration

Default*

Compatibility

Secure

Set the IPSec base conﬁguration.

Note: This menu item appears only when Enable IPSec is set to

On.

IPSec Device Certiﬁcate Specify an IPSec certiﬁcate.

Note: This menu item appears only when Base Conﬁguration is set

to Compatibility.

Pre‑Shared Key Authenticated

Connections

Host [x]

Address

Key

Conﬁgure the authenticated connections of the printer.

Note: These menu items appear only when Enable IPSec is set to

On.

Certiﬁcate Authenticated Connections

Host [x] Address[/subnet]

Address[/subnet]

Note: An asterisk (*) next to a value indicates the factory default setting.

802.1x

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item Description

Active

O*

Let the printer join networks that require authentication before

allowing access.

Note: To conﬁgure the settings of this menu item, access the

Embedded Web Server.

Note: An asterisk (*) next to a value indicates the factory default setting.

LPD Conﬁguration

Note: This menu appears only in network printers or printers that are attached to print servers.

Menu item Description

LPD Timeout

0–65535 seconds (90*)

Set the time‑out value to stop the Line Printer Daemon (LPD) server

from waiting indeﬁnitely for hung or invalid print jobs.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 47

Menu item Description

LPD Banner Page

O*

Print a banner page for all LPD print jobs.

Note: A banner page is the ﬁrst page of a print job used as a

separator of print jobs and to identify the originator of the print job

request.

LPD Trailer Page

O*

Print a trailer page for all LPD print jobs.

Note: A trailer page is the last page of a print job.

LPD Carriage Return Conversion

O*

Enable carriage return conversion.

Note: Carriage return is a mechanism that commands the printer to

move the position of the cursor to the ﬁrst position on the same

line.

Note: An asterisk (*) next to a value indicates the factory default setting.

HTTP/FTP Settings

Note: This menu appears only in network printers or printers attached to print servers.

Menu item Description

Enable HTTP Server

O

On*

Access the Embedded Web Server to monitor and manage the printer.

Enable HTTPS

O

On*

Conﬁgure the HyperText Transfer Protocol Secure (HTTPS) settings.

Enable FTP/TFTP

O

On*

Send ﬁles using FTP.

HTTP Default IP Port

1–65535 (80*)

Conﬁgure the HTTP and FTP server settings.

HTTPS Device Certiﬁcate

FTP Default IP Port

1–65535 (21*)

Timeout for HTTP/FTP

Requests

1–299 (30*)

Specify the time in seconds before the server connection stops.

Retries for HTTP/FTP Requests

1–299 (3*)

Set the number of retries to connect to the HTTP/FTP server.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 48

USB

Menu item Description

PCL SmartSwitch

On*

O

Set the printer to switch to PCL emulation when a print job received through a

USB port requires it, regardless of the default printer language.

Note: If PCL SmartSwitch is o, then the printer does not examine incoming

data and uses the default printer language speciﬁed in the Setup menu.

PS SmartSwitch

On*

O

Set the printer to switch to PS emulation when a print job received through a

USB port requires it, regardless of the default printer language.

Note: If PS SmartSwitch is o, then the printer does not examine incoming

data and uses the default printer language speciﬁed in the Setup menu.

Mac Binary PS

Auto*

O

Set the printer to process Macintosh binary PostScript print jobs.

Notes:

•On processes raw binary PostScript print jobs.

•O ﬁlters print jobs using the standard protocol.

Enable USB Port

Enable*

Disable

Enable the standard USB port.

Note: An asterisk (*) next to a value indicates the factory default setting.

ThinPrint

Menu item Description

Enable ThinPrint

O

On*

Print using ThinPrint.

Port Number

4000–4999 (4000*)

Set the port number for the ThinPrint server.

Bandwidth (bits/sec)

100–1000000

Set the speed to transmit data in a ThinPrint environment.

Packet Size (kbytes)

0–64000 (0*)

Set the packet size for data transmission.

Note: An asterisk (*) next to a value indicates the factory default setting.

Google Cloud Print

Menu item Description

Registration

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 49

Menu item Description

Options

Enable Google Cloud Print

O

On*

Print directly from your Google account.

Options

Enable Local Discovery

O

On*

Allow the registered user and other users on the same subnet to

send jobs to the printer locally.

Options

Enable SSL Peer Veriﬁcation

O

On*

Verify authenticity of the peer certiﬁcate to connect to your Google

account.

Options

Always Print As Image

O*

Set the printer to process PDF ﬁles as an image for faster printing.

Note: An asterisk (*) next to a value indicates the factory default setting.

Wi‑Fi Direct

Note: This menu appears only when a direct Wi‑Fi network is the active network.

Menu item Description

SSID Specify the service set identiﬁer (SSID) of the Wi‑Fi network.

Set Preshared Key Set the preshared key (PSK) to authenticate and validate users on a Wi‑Fi

connection.

Show PSK on Setup Page

On*

O

Show the PSK on the Network Setup Page.

Group Owner IP Address Specify the IP address of the group owner.

Auto‑Accept Push Button

Requests

O*

Accept requests to connect to the network automatically.

Note: Accepting clients automatically is not secured.

Note: An asterisk (*) next to a value indicates the factory default setting.

Understanding the printer menus 50

Reports

Menu Settings Page

Menu item Description

Menu Settings Page Print a report that contains the printer preferences, settings, and conﬁgurations.

Device

Menu item Description

Device Information Print a report that contains information about the printer.

Device Statistics Print a report about printer usage and supply status.

Proﬁle List Print a list of proﬁles that are stored in the printer.

Asset Report Print a report that contains the printer serial number and model name.

Menu item Description

Print Fonts

PCL Fonts

PS Fonts

Print a list of supported fonts.

Network

Menu item Description

Network Setup Page Print a page that shows the conﬁgured network and wireless settings on the

printer.

Note: This menu item appears only in network printers or printers connected

to print servers.

Troubleshooting

Menu item Description

Print Quality Test Pages Print sample pages to identify and correct print quality defects.

Understanding the printer menus 51

Printing the Menu Settings Page

1From the control panel, navigate to:

> Reports >

2Select Menu Settings Page, and then press .

Understanding the printer menus 52

Securing the printer

Locating the security slot

The printer is equipped with a security lock feature. Attach a security lock compatible with most laptop

computers in the location shown to secure the printer in place.

Erasing printer memory

To erase volatile memory or buered data, turn o the printer.

To er a s e non‑volatile memory or individual settings, device and network settings, security settings, and

embedded solutions, do the following:

1From the control panel, navigate to:

> Device > > Maintenance > > Out of Service Erase >

2Select Sanitize all information on nonvolatile memory, and then press .

3To start the job, select Continue, and then press .

4Follow the instructions on the display.

Securing the printer 53

Restoring factory default settings

1From the control panel, navigate to:

> Device > > Restore Factory Defaults > > Restore Settings >

2Select Restore all settings, and then press .

3To start the process, navigate to:

RESTORE > > Start >

For a more comprehensive method of restoring the factory default settings, see “Erasing printer memory” on

page 53.

Statement of Volatility

Type of memory Description

Volatile memory The printer uses standard random access memory (RAM)

to buer temporarily user data during simple print and

copy jobs.

Non-volatile memory The printer may use two forms of non-volatile memory:

EEPROM and NAND (ﬂash memory). Both types are used

to store the operating system, printer settings, network

information, scanner and bookmark settings, and

embedded solutions.

Hard disk memory Some printers may have a hard disk drive installed. The

printer hard disk is designed for printer-speciﬁc

functionality. The hard disk lets the printer retain buered

user data from complex print jobs, form data, and font

data.

Erase the content of any installed printer memory in the following circumstances:

•The printer is decommissioned.

•The printer hard disk is replaced.

•The printer is moved to a dierent department or location.

•The printer is serviced by someone from outside your organization.

•The printer is removed from your premises for service.

•The printer is sold to another organization.

Disposing of a printer hard disk

•Degaussing—Flushes the hard disk with a magnetic ﬁeld that erases stored data

•Crushing—Physically compresses the hard disk to break component parts and render them unreadable

•Milling—Physically shreds the hard disk into small metal bits

Note: To guarantee that all data are completely erased, destroy physically each hard disk where data is

stored.

Securing the printer 54

Maintaining the printer

Warning—Potential Damage: Failure to maintain optimum printer performance, or to replace parts and

supplies, may cause damage to your printer.

Networking

Connecting the printer to a Wi‑Fi network

1From the printer control panel, navigate to:

Settings > Network/Ports > Wireless

For non-touch-screen printer models, press to navigate through the settings.

2Select Setup On Printer Panel and then follow the instructions on the display.

Note: For Wi‑Fi‑network‑ready printer models, a prompt for Wi‑Fi network setup appears during initial setup.

Connecting the printer to a wireless network using Wi‑Fi Protected Setup

(WPS)

Before you begin, make sure that:

•The access point (wireless router) is WPS‑certiﬁed or WPS‑compatible. For more information, see the

documentation that came with your access point.

•A wireless network adapter is installed in your printer. For more information, see the instructions that came

with the adapter.

Using the Push Button method

1From the control panel, navigate to:

> Settings > > Network/Ports > > Wireless >

2Select Wi‑Fi Protected Setup, and then press .

3Select Start Push Button Method, and then press .

4Follow the instructions on the display.

Using the personal identiﬁcation number (PIN) method

1From the control panel, navigate to:

> Settings > > Network/Ports > > Wireless >

2Select Wi‑Fi Protected Setup, and then press .

Maintaining the printer 55

3Select Start PIN Method, and then press .

4Copy the eight‑digit WPS PIN.

5Open a web browser, and then type the IP address of your access point in the address ﬁeld.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the web page correctly.

6Access the WPS settings. For more information, see the documentation that came with your access

point.

7Enter the eight‑digit PIN, and then save the changes.

Deactivating the Wi‑Fi network

1From the printer control panel, navigate to:

Settings > Network/Ports > Network Overview > Active Adapter > Standard Networking

For non-touch-screen printer models, press to navigate through the settings.

2Follow the instructions on the display.

Cleaning the printer

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the

printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before

proceeding.

Notes:

•Perform this task after every few months.

•Damage to the printer caused by improper handling is not covered by the printer warranty.

1Turn o the printer, and then unplug the power cord from the electrical outlet.

2Remove paper from the standard bin and multipurpose feeder.

3Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum.

4Wipe the outside of the printer with a damp, soft, lint‑free cloth.

Notes:

•Do not use household cleaners or detergents, as they may damage the ﬁnish of the printer.

•Make sure that all areas of the printer are dry after cleaning.

5Connect the power cord to the electrical outlet, and then turn on the printer.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily

accessible.

Maintaining the printer 56

Ordering parts and supplies

To order parts and supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark

authorized dealers in your area. In other countries or regions, go to www.lexmark.com or contact the place

where you purchased the printer.

Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper.

Checking the status of parts and supplies

From the control panel, navigate to:

> Status/Supplies > > Supplies >

Using genuine Lexmark parts and supplies

Your Lexmark printer is designed to function best with genuine Lexmark parts and supplies. Use of third-party

supplies or parts may aect the performance, reliability, or life of the printer and its imaging components. It can

also aect warranty coverage. Damage caused by the use of third-party parts and supplies is not covered by

the warranty. All life indicators are designed to function with Lexmark parts and supplies, and may deliver

unpredictable results if third-party parts and supplies are used. Imaging component usage beyond the intended

life may damage your Lexmark printer or its associated components.

Ordering a toner cartridge

Notes:

•The estimated cartridge yield is based on the ISO/IEC 19752 standard.

•Extremely low print coverage for extended periods of time may negatively aect actual yield.

MS321 and MS421 Return Program toner cartridges

Item United States

and Canada

European

Economic

Area

Rest of Asia

Paciﬁc

Latin America Rest of

Europe,

Middle East,

and Africa

Australia and

New Zealand

Return

Program toner

cartridge

56F1000 56F2000 56F3000 56F4000 56F5000 56F6000

High yield

Return

Program toner

cartridge

56F1H00 56F2H00 56F3H00 56F4H00 56F5H00 56F6H00

1 This cartridge is supported only in MS421 printer model.

2 These cartridges are available only for contract‑managed printers. For more information, contact your Lexmark

representative or system administrator.

Maintaining the printer 57

Item United States

and Canada

European

Economic

Area

Rest of Asia

Paciﬁc

Latin America Rest of

Europe,

Middle East,

and Africa

Australia and

New Zealand

Extra high

yield Return

Program toner

cartridge1

56F1X00 56F2X00 56F3X00 56F4X00 56F5X00 56F6X00

High yield

Corporate

Return

Program toner

cartridge2

56F1H0E 56F2H0E 56F3H0E 56F4H0E 56F5H0E 56F6H0E

Extra high

yield

Corporate

Return

Program toner

cartridge1, 2

56F1X0E 56F2X0E 56F3X0E 56F4X0E 56F5X0E 56F6X0E

1 This cartridge is supported only in MS421 printer model.

2 These cartridges are available only for contract‑managed printers. For more information, contact your Lexmark

representative or system administrator.

MS321 and MS421 regular toner cartridges

Item Worldwide

High yield regular toner cartridge156F0HA0

Extra high yield regular toner cartridge256F0XA0

1 This cartridge is supported only in MS321 printer model.

2 This cartridge is supported only in MS421 printer model.

M1242 Return Program toner cartridge

Item United States, Canada,

Australia, and New Zealand

European Economic

Area

Rest of Asia Paciﬁc Latin America

Return Program toner

cartridge

24B6885 24B6888 24B6891 24B6894

Maintaining the printer 58

B2338 and B2442 Return Program toner cartridges

Item United States

and Canada

European

Economic

Area

Rest of Asia

Paciﬁc

Latin America Rest of Europe,

Middle East,

and Africa

Australia and

New Zealand

Return

Program toner

cartridge

SB231000 SB232000 SB233000 SB234000 SB235000 SB236000

High yield

Return

Program toner

cartridge*

SB241H00 SB242H00 SB243H00 SB244H00 SB245H00 SB246H00

* This toner cartridge is supported only in B2442 printer model.

B2338 and B2442 regular toner cartridges

Item Worldwide

Regular toner cartridge1SB2300A0

High yield regular toner cartridge2SB240HA0

1 This cartridge is supported only in B2338 printer model.

2 This cartridge is supported only in B2442 printer model.

Ordering an imaging unit

Extremely low print coverage for extended periods of time may cause imaging unit parts to fail before the toner

is exhausted.

Item Part Number

Return Program imaging unit 56F0Z00

Regular imaging unit 56F0ZA0

Corporate Return Program imaging unit* 56F0Z0E

* This imaging unit is available only for contract‑managed printers. For more information, contact your Lexmark

representative or system administrator.

Conﬁguring supply notiﬁcations

1Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the web page correctly.

2Click Settings > Device > Notiﬁcations.

3From the Supplies menu, click Custom Supply Notiﬁcations.

Maintaining the printer 59

4Select a notiﬁcation for each supply item.

5Apply the changes.

Replacing parts and supplies

Replacing the toner cartridge

1Open door A.

2Remove the used toner cartridge.

Maintaining the printer 60

3Unpack the new toner cartridge, and then shake it three times to redistribute the toner.

4Insert the new toner cartridge.

Note: Use the arrows inside the printer as guides.

5Close door A.

Maintaining the printer 61

Replacing the imaging unit

1Open door A.

2Remove the toner cartridge.

3Remove the used imaging unit.

Maintaining the printer 62

4Unpack the new imaging unit, and then shake it three times to redistribute the toner.

Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.

Extended exposure to light may cause print quality problems.

Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may aect the quality of

future print jobs.

5Insert the new imaging unit.

Note: Use the arrows inside the printer as guides.

6Insert the toner cartridge.

Note: Use the arrows inside the printer as guides.

Maintaining the printer 63

7Close door A.

Replacing the pick tires

1Turn o the printer.

2Unplug the power cord from the electrical outlet, and then from the printer.

3Remove the tray.

Maintaining the printer 64

4Remove the used pick tires one after the other.

5Unpack the new pick tires.

Maintaining the printer 65

6Insert the new pick tires.

7Insert the tray.

8Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily

accessible.

9Turn on the printer.

Replacing the pick roller assembly

1Turn o the printer.

2Unplug the power cord from the electrical outlet, and then from the printer.

3Remove the optional tray.

CAUTION—POTENTIAL INJURY: If the printer weight is greater than 18 kg (40 lb), then it requires

two or more trained personnel to lift it safely.

Maintaining the printer 66

4Remove the tray insert, and then ﬂip the tray base.

Maintaining the printer 67

5Remove the used pick roller assembly.

6Unpack the new pick roller assembly.

Maintaining the printer 68

7Insert the new pick roller assembly.

8Flip the tray base, and then insert the tray insert.

Maintaining the printer 69

9Align the printer with the optional tray, and then lower the printer until it clicks into place.

10 Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily

accessible.

11 Turn on the printer.

Moving the printer

Moving the printer to another location

CAUTION—POTENTIAL INJURY: If the printer weight is greater than 18 kg (40 lb), then it requires two or

more trained personnel to lift it safely.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY: When moving the printer, follow these guidelines to avoid personal

injury or printer damage:

•Make sure that all doors and trays are closed.

•Turn o the printer, and then unplug the power cord from the electrical outlet.

•Disconnect all cords and cables from the printer.

•If the printer has separate ﬂoor-standing optional trays or output options attached to it, then disconnect

them before moving the printer.

Maintaining the printer 70

•If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over

thresholds and breaks in ﬂooring.

•If the printer does not have a caster base but is conﬁgured with optional trays or output options, then remove

the output options and lift the printer o the trays. Do not try to lift the printer and any options at the same

time.

•Always use the handholds on the printer to lift it.

•Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•Any cart used to move the hardware options must have a surface able to support the dimensions of the

options.

•Keep the printer in an upright position.

•Avoid severe jarring movements.

•Make sure that your ﬁngers are not under the printer when you set it down.

•Make sure that there is adequate clearance around the printer.

Note: Damage to the printer caused by improper moving is not covered by the printer warranty.

Shipping the printer

For shipping instructions, go to http://support.lexmark.com or contact customer support.

Saving energy and paper

Conﬁguring power save mode settings

Eco‑Mode

1From the control panel, navigate to:

> Device > > Power Management > > Eco‑Mode >

2Select a setting.

Sleep mode

1From the control panel, navigate to:

> Device > > Power Management > > Timeouts > > Sleep Mode >

2Enter the amount of time that the printer stays idle before it enters Sleep mode.

Hibernate mode

1From the control panel, navigate to:

> Device > > Power Management > > Timeouts > > Hibernate Timeout >

2Select the amount of time before the printer enters Hibernate mode.

Maintaining the printer 71

Notes:

•Make sure to wake the printer from Hibernate mode before sending a print job.

•The Embedded Web Server is disabled when the printer is in Hibernate mode.

Adjusting the brightness of printer display

1From the control panel, navigate to:

> Device > > Preferences >

2Select Screen Brightness, and then press .

3Adjust the setting, and then press .

Conserving supplies

•Print on both sides of the paper.

Note: Two-sided printing is the default setting in the print driver.

•Print multiple pages on a single sheet of paper.

•Use the preview feature to see how the document looks like before printing it.

•Print one copy of the document to check its content and format for accuracy.

Recycling

Recycling Lexmark products

To return Lexmark products for recycling:

1Go to www.lexmark.com/recycle.

2Select the product you want to recycle.

Note: Printer supplies and hardware not listed in the Lexmark Collection and Recycling Program may be

recycled through your local recycling center.

Recycling Lexmark packaging

Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are

transported in the most ecient and environmentally sensitive manner and that there is less packaging to

dispose of. These eciencies result in fewer greenhouse emissions, energy savings, and natural resource

savings. Lexmark also oers recycling of packaging components in some countries or regions. For more

information, go to www.lexmark.com/recycle, and then choose your country or region. Information on available

packaging recycling programs is included with the information on product recycling.

Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your

area.

Maintaining the printer 72

The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist

in your area.

When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark recycles

the box.

Returning Lexmark cartridges for reuse or recycling

The Lexmark Cartridge Collection Program allows you to return used cartridges for free to Lexmark for reuse

or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or

demanufactured for recycling. The boxes used to return the cartridges are also recycled.

To return Lexmark cartridges for reuse or recycling, do the following:

1Go to www.lexmark.com/recycle.

2Select the product that you want to recycle.

Maintaining the printer 73

Clearing jams

Avoiding jams

Load paper properly

•Make sure that the paper lies ﬂat in the tray.

Correct loading of paper Incorrect loading of paper

•Do not load or remove a tray while the printer is printing.

•Do not load too much paper. Make sure that the stack height is below the maximum paper ﬁll indicator.

•Do not slide paper into the tray. Load paper as shown in the illustration.

•Make sure that the paper guides are positioned correctly and are not pressing tightly against the paper or

envelopes.

•Push the tray ﬁrmly into the printer after loading paper.

Use recommended paper

•Use only recommended paper or specialty media.

•Do not load paper that is wrinkled, creased, damp, bent, or curled.

Clearing jams 74

•Flex, fan, and align the paper edges before loading.

•Do not use paper that has been cut or trimmed by hand.

•Do not mix paper sizes, weights, or types in the same tray.

•Make sure that the paper size and type are set correctly on the computer or printer control panel.

•Store paper according to manufacturer recommendations.

Identifying jam locations

Notes:

•When Jam Assist is set to On, the printer automatically ﬂushes blank pages or partially printed pages

after a jammed page has been cleared. Check your printed output for blank pages.

•When Jam Recovery is set to On or Auto, the printer reprints jammed pages.

Jam location

1Standard bin

2Rear door

3Tray [x]

4Multipurpose feeder

5Door A

Clearing jams 75

Paper jam in door A

1Remove the tray.

2Open door A.

3Remove the toner cartridge.

Clearing jams 76

4Remove the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes.

Extended exposure to light may cause print quality problems.

Warning—Potential Damage: Do not touch the photoconductor drum. Doing so may aect the quality of

future print jobs.

5Remove the jammed paper.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a

hot component, allow the surface to cool before touching it.

Note: Make sure that all paper fragments are removed.

Clearing jams 77

6Insert the imaging unit.

Note: Use the arrows inside the printer as guides.

7Insert the toner cartridge.

Note: Use the arrows inside the printer as guides.

Clearing jams 78

8Close door A.

9Insert the tray.

Paper jam in the rear door

1Open the rear door.

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a

hot component, allow the surface to cool before touching it.

2Remove the jammed paper.

Note: Make sure that all paper fragments are removed.

Clearing jams 79

3Close the rear door.

Paper jam in the standard bin

Remove the jammed paper.

Note: Make sure that all paper fragments are removed.

Clearing jams 80

Paper jam in the duplex unit

1Remove the tray.

2Remove the jammed paper.

Note: Make sure that all paper fragments are removed.

3Insert the tray.

Clearing jams 81

Paper jam in trays

1Remove the tray.

2Remove the jammed paper.

Note: Make sure that all paper fragments are removed.

3Insert the tray.

Paper jam in the multipurpose feeder

1Remove paper from the multipurpose feeder.

2Remove the jammed paper.

Note: Make sure that all paper fragments are removed.

Clearing jams 82

3Flex, fan, and align the paper edges before loading.

4Reload paper, and then adjust the paper guide.

Clearing jams 83

Troubleshooting

Network connection problems

Cannot open Embedded Web Server

Action Yes No

Step 1

Check if the printer is on.

Is the printer on?

Go to step 2. Turn on the printer.

Step 2

Make sure that the printer IP address is correct.

View the printer IP address:

•From the home screen

•From the TCP/IP section in the Network/Ports menu

•By printing a network setup page or menu settings page,

and then ﬁnding the TCP/IP section

Note: An IP address appears as four sets of numbers separated

by periods, such as 123.123.123.123.

Is the printer IP address correct?

Go to step 3. Type the correct

printer IP address in

the address ﬁeld.

Step 3

Check if you are using a supported browser:

•Internet Explorer® version 11 or later

•Microsoft EdgeTM

•Safari version 6 or later

•Google ChromeTM version 32 or later

•Mozilla Firefox version 24 or later

Is your browser supported?

Go to step 4. Install a supported

browser.

Step 4

Check if the network connection is working.

Is the network connection working?

Go to step 5. Contact your

administrator.

Step 5

Make sure that the cable connections to the printer and print server

are secure. For more information, see the documentation that

came with the printer.

Are the cable connections secure?

Go to step 6. Secure the cable

connections.

Troubleshooting 84

Action Yes No

Step 6

Check if the web proxy servers are disabled.

Are the web proxy servers disabled?

Go to step 7. Contact your

administrator.

Step 7

Access the Embedded Web Server.

Did the Embedded Web Server open?

The problem is

solved.

Contact customer

support.

Checking the printer connectivity

1From the control panel, navigate to:

> Reports > > Network >

2Select Network Setup Page, and then press .

3Check the ﬁrst section of the network setup page, and conﬁrm that the status is connected.

If the status is not connected, then the LAN drop may be inactive, or the network cable may be unplugged

or malfunctioning. Contact your administrator for assistance.

Issues with supplies

Replace cartridge, printer region mismatch

To correct this problem, purchase a cartridge with the correct region that matches the printer region, or

purchase a worldwide cartridge.

•The ﬁrst number in the message after 42 indicates the region of the printer.

•The second number in the message after 42 indicates the region of the cartridge.

Printer and toner cartridge regions

Region Numeric code

Worldwide or Undeﬁned region 0

North America (United States, Canada) 1

European Economic Area, Western Europe, Nordic countries, Switzerland 2

Asia Paciﬁc 3

Latin America 4

Rest of Europe, Middle East, Africa 5

Australia, New Zealand 6

Invalid region 9

Troubleshooting 85

Note: To ﬁnd the region settings of the printer and toner cartridge, print the print quality test pages.

From the control panel, navigate to: Settings > Troubleshooting > Print Quality Test Pages.

Non‑Lexmark supply

The printer has detected a non‑Lexmark supply or part installed in the printer.

Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-

party supplies or parts may aect the performance, reliability, or life of the printer and its imaging

components.

All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable

results if third-party supplies or parts are used. Imaging component usage beyond the intended life may

damage your Lexmark printer or associated components.

Warning—Potential Damage: Use of third-party supplies or parts can aect warranty coverage.

Damage caused by the use of third-party supplies or parts may not be covered by the warranty.

To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your

printer, from the control panel, press and hold X and simultaneously for 15 seconds.

If you do not want to accept these risks, then remove the third-party supply or part from your printer and

install a genuine Lexmark supply or part. For more information, see “Using genuine Lexmark parts and

supplies” on page 57.

If the printer does not print after pressing and holding X and simultaneously for 15 seconds, then reset

the supply usage counter.

1From the control panel, navigate to:

Settings > > Device > > Maintenance > > Conﬁg Menu > > Supply Usage And

Counters >

2Select the part or supply that you want to reset, and then select Start.

3Read the warning message, and then select Continue.

4Press and hold X and simultaneously for 15 seconds to clear the message.

Note: If you are unable to reset the supply usage counters, then return the item to the place of

purchase.

Troubleshooting 86

Paper feed problems

Envelope seals when printing

Action Yes No

1Use envelopes that have been stored in a dry environment.

Note: Printing on envelopes with high moisture content can seal the

ﬂaps.

2Resend the print job.

Does the envelope seal when printing?

Contact

customer

support.

The problem is

solved.

Collated printing does not work

Action Yes No

Step 1

aFrom the control panel, navigate to:

> Print > > Layout >

bSelect Collate, and then press .

cSet Collate to On, and then press .

dPrint the document.

Is the document collated correctly?

The problem is

solved.

Go to step 2.

Step 2

aFrom the document that you are trying to print, open the Print

dialog, and then select Collate.

bPrint the document.

Is the document collated correctly?

The problem is

solved.

Go to step 3.

Step 3

aReduce the number of pages to print.

bPrint the document.

Are the pages collated correctly?

The problem is

solved.

Contact customer

support.

Troubleshooting 87

Tray linking does not work

Action Yes No

Step 1

aCheck if the trays contain the same paper size and paper type.

bCheck if the paper guides are positioned correctly.

cPrint the document.

Do the trays link correctly?

The problem is

solved.

Go to step 2.

Step 2

aFrom the control panel, navigate to:

Settings > Paper > Tray Conﬁguration > Paper Size/Type

For non-touch-screen printer models, press to navigate

through the settings.

bSet the paper size and paper type to match the paper loaded

in the linked trays.

cPrint the document.

Do the trays link correctly?

The problem is

solved.

Go to step 3.

Step 3

aMake sure that Tray Linking is set to Automatic. For more

information, see “Linking trays” on page 17.

bPrint the document.

Do the trays link correctly?

The problem is

solved.

Contact customer

support.

Paper frequently jams

Action Yes No

Step 1

aRemove the tray.

bCheck if paper is loaded correctly.

Notes:

•Make sure that the paper guides are positioned correctly.

•Make sure that the stack height is below the maximum

paper ﬁll indicator.

•Make sure to print on recommended paper size and type.

cInsert the tray.

dPrint the document.

Do paper jams occur frequently?

Go to step 2. The problem is

solved.

Troubleshooting 88

Action Yes No

Step 2

aFrom the control panel, navigate to:

Settings > Paper > Tray Conﬁguration > Paper Size/Type

For non‑touch‑screen printer models, press to navigate

through the settings.

bSet the correct paper size and type.

cPrint the document.

Do paper jams occur frequently?

Go to step 3. The problem is

solved.

Step 3

aLoad paper from a fresh package.

Note: Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

bPrint the document.

Do paper jams occur frequently?

Contact customer

support.

The problem is

solved.

Jammed pages are not reprinted

Action Yes No

1From the control panel, navigate to:

> Notiﬁcations >

2From the Printer Jam Recovery menu, select On or Auto, and then press

Are the jammed pages reprinted?

The problem is

solved.

Contact

customer

support.

Printing problems

Print quality is poor

Blank or white pages

Troubleshooting 89

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the cartridge is not supported, then install a

supported one.

bPrint the document.

Is the printer printing blank or white pages?

Go to step 2. The problem is

solved.

Step 2

aRemove any packing material that is left on the imaging unit.

1Remove the toner cartridge, and then remove the imaging

unit.

Warning—Potential Damage: Do not expose the imaging

unit to direct light for more than 10 minutes. Extended

exposure to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so

may aect the quality of future print jobs.

2Check the imaging unit for signs of damage, and replace if

necessary.

Note: Make sure that the photoconductor drum contact is

not bent or out of place.

3Firmly shake the imaging unit to redistribute the toner.

4Insert the imaging unit, and then insert the toner cartridge.

bPrint the document.

Is the printer printing blank or white pages?

Go to step 3. The problem is

solved.

Step 3

Check the status of the toner cartridge, and replace if necessary.

aFrom the control panel, navigate to:

Status/Supplies > Supplies

bPrint the document.

Is the printer printing blank or white pages?

Contact customer

support.

The problem is

solved.

Troubleshooting 90

Dark print

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the cartridge is not supported, then install a

supported one.

bPrint the document.

Is the print dark?

Go to step 2. The problem is

solved.

Step 2

aTurn o the printer, wait for about 10 seconds, and then turn on

the printer.

bReduce toner darkness. From the control panel, navigate to:

Settings > Print > Quality

cPrint the document.

Is the print dark?

Go to step 3. The problem is

solved.

Step 3

aDepending on your operating system, specify the paper type

from the Printing Preferences or Print dialog.

Notes:

•Make sure that the setting matches the paper loaded.

•You can also change the setting on the printer control

panel.

bPrint the document.

Is the print dark?

Go to step 4. The problem is

solved.

Step 4

Check if the paper has texture or rough ﬁnishes.

Are you printing on textured or rough paper?

Go to step 5. Go to step 6.

Troubleshooting 91

Action Yes No

Step 5

aReplace textured paper with plain paper.

bPrint the document.

Is the print dark?

Go to step 6. The problem is

solved.

Step 6

aLoad paper from a fresh package.

Note: Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

bPrint the document.

Is the print dark?

Go to step 7. The problem is

solved.

Step 7

aRemove, and then insert the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bPrint the document.

Is the print dark?

Go to step 8. The problem is

solved.

Step 8

aReplace the imaging unit.

bPrint the document.

Is the print dark?

Contact customer

support.

The problem is

solved.

Fine lines are not printed correctly

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Troubleshooting 92

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the cartridge is not supported, then install a

supported one.

bPrint the document.

Are ﬁne lines not printed correctly?

Go to step 2. The problem is

solved.

Step 2

aAdjust the print quality settings.

1From the control panel, navigate to:

Settings > Print > Quality > Pixel Boost > Fonts

2Adjust Toner Darkness to 7. From the control panel, navigate

to:

Settings > Print > Quality

bPrint the document.

Are ﬁne lines not printed correctly?

Contact customer

support.

The problem is

solved.

Folded or wrinkled paper

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the cartridge is not supported, then install a

supported one.

bPrint the document.

Is the paper folded or wrinkled?

Go to step 2. The problem is

solved.

Troubleshooting 93

Action Yes No

Step 2

aLoad paper from a fresh package.

Note: Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

bPrint the document.

Is the paper folded or wrinkled?

Go to step 3. The problem is

solved.

Step 3

aDepending on your operating system, specify the paper type

from the Printing Preferences or Print dialog.

Notes:

•Make sure that the setting matches the paper loaded.

•You can also change the setting from the printer control

panel.

bPrint the document.

Is the paper folded or wrinkled?

Contact customer

support.

The problem is

solved.

Gray background

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aTurn o the printer, wait for 10 seconds, and then turn on the

printer.

bIncrease toner darkness.

From the control panel, navigate to:

Settings > Print > Quality

cPrint the document.

Does gray background appear on prints?

Go to step 2. The problem is

solved.

Troubleshooting 94

Action Yes No

Step 2

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the toner cartridge is not supported, then install a

supported one.

bPrint the document.

Does gray background appear on prints?

Go to step 3. The problem is

solved.

Step 3

aDepending on your operating system, specify the paper type

from the Printing Preferences or Print dialog.

Notes:

•Make sure that the setting matches the paper loaded.

•You can also change the setting from the printer control

panel.

bPrint the document.

Does gray background appear on prints?

Go to step 4. The problem is

solved.

Step 4

Check the status of the toner cartridge, and replace if necessary.

aFrom the control panel, navigate to:

Status/Supplies > Supplies

bPrint the document.

Does gray background appear on prints?

Go to step 5. The problem is

solved.

Troubleshooting 95

Action Yes No

Step 5

aRemove the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bRemove any packing material that is stuck on the imaging unit.

Note: Make sure to remove any obstruction between the

charge roller and photoconductor drum.

cInsert the imaging unit.

dPrint the document.

Does gray background appear on prints?

Go to step 6. The problem is

solved.

Step 6

aReplace the imaging unit.

bPrint the document.

Does gray background appear on prints?

Contact customer

support.

The problem is

solved.

Horizontal light bands

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Troubleshooting 96

Action Yes No

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the cartridge is not supported, then install a

supported one.

bPrint the document.

Do horizontal light bands appear on prints?

Contact customer

support.

The problem is

solved.

Incorrect margins

Action Yes No

Step 1

aAdjust the paper guides to the correct position for the paper

loaded.

bPrint the document.

Are the margins correct?

The problem is

solved.

Go to step 2.

Step 2

aDepending on your operating system, specify the paper size

from the Printing Preferences or Print dialog.

Notes:

•Make sure that the setting matches the paper loaded.

•You can also change the setting from the printer control

panel.

bPrint the document.

Are the margins correct?

The problem is

solved.

Contact customer

support.

Troubleshooting 97

Light print

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the cartridge is not supported, then install a

supported one.

bPrint the document.

Is the print light?

Go to step 2. The problem is

solved.

Step 2

aTurn o the printer, wait for about 10 seconds, and then turn on

the printer.

bIncrease toner darkness. From the control panel, navigate to:

Settings > Print > Quality

cPrint the document.

Is the print light?

Go to step 3. The problem is

solved.

Step 3

aDepending on your operating system, specify the paper type

from the Printing Preferences or Print dialog.

Notes:

•Make sure that the setting matches the paper loaded.

•You can also change the setting on the printer control

panel.

bPrint the document.

Is the print light?

Go to step 4. The problem is

solved.

Troubleshooting 98

Action Yes No

Step 4

Check the status of the toner cartridge, and replace if necessary.

aFrom the control panel, navigate to:

Status/Supplies > Supplies

bPrint the document.

Is the print light?

Go to step 5. The problem is

solved.

Step 5

aRemove the toner cartridge, and then remove the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light can cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bPush either side of the transfer roller, located below the imaging

unit, to check if it depresses and bounces back into place.

CAUTION—HOT SURFACE: The inside of the printer

might be hot. To reduce the risk of injury from a hot

component, allow the surface to cool before touching it.

cIf the transfer roller does not depress and bounce back into

place, then remove and insert it.

1Pull up one end of the transfer roller and push it down until

it clicks into place.

2If necessary, repeat the step on the other end.

dFirmly shake the imaging unit to redistribute the toner, and then

insert it.

eInsert the toner cartridge.

fTurn o the printer, wait for 10 seconds, and then turn on the

printer.

gPrint the document.

Is the print light?

Go to step 6. The problem is

solved.

Step 6

aIf the issue happens after installing a new maintenance kit, then

check whether the transfer roller included with the kit is

installed.

Note: If necessary, replace the transfer roller.

bPrint the document.

Is the print light?

Go to step 7. The problem is

solved.

Troubleshooting 99

Action Yes No

Step 7

Check the status of the imaging unit. From the control panel,

navigate to:

Status/Supplies > Supplies

Is the imaging unit near End of Life?

Go to step 8. Contact customer

support.

Step 8

aReplace the imaging unit.

bPrint the document.

Is the print light?

Contact customer

support.

The problem is

solved.

Mottled print and dots

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the toner cartridge is not supported, then install a

supported one.

bPrint the document.

Is the print mottled?

Go to step 2. The problem is

solved.

Step 2

Check the printer for leaked toner contamination.

Is the printer free of leaked toner?

Go to step 4. Go to step 3.

Step 3

aReplace the toner cartridge.

bPrint the document.

Is the print mottled?

Go to step 4. The problem is

solved.

Troubleshooting 100

Action Yes No

Step 4

Check the status of the imaging unit. From the control panel,

navigate to:

Status/Supplies > Supplies

Is the imaging unit near end of life?

Go to step 5. Contact customer

support.

Step 5

aReplace the imaging unit.

bPrint the document.

Is the print mottled?

Contact customer

support.

The problem is

solved.

Paper curl

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the cartridge is not supported, then install a

supported one.

bPrint the document.

Is the paper curled?

Go to step 2. The problem is

solved.

Step 2

aAdjust the guides in the tray to the correct position for the paper

loaded.

bPrint the document.

Is the paper curled?

Go to step 3. The problem is

solved.

Troubleshooting 101

Action Yes No

Step 3

aDepending on your operating system, specify the paper size

and paper type from the Printing Preferences or Print dialog.

Notes:

•Make sure that the settings match the paper loaded.

•You can also change the settings from the printer control

panel.

bPrint the document.

Is the paper curled?

Go to step 4. The problem is

solved.

Step 4

aRemove paper from the tray, and then turn over the paper.

bPrint the document.

Is the paper curled?

Go to step 5. The problem is

solved.

Step 5

aLoad paper from a fresh package.

Note: Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

bPrint the document.

Is the paper curled?

Go to step 6. The problem is

solved.

Step 6

aCheck if the paper loaded is supported.

Note: If paper is not supported, then load a supported paper.

bPrint the document.

Is the paper curled?

Contact customer

support.

The problem is

solved.

Print crooked or skewed

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Troubleshooting 102

Action Yes No

Step 1

aAdjust the guides in the tray to the correct position for the paper

loaded.

bPrint the document.

Is the print crooked or skewed?

Go to step 2. The problem is

solved.

Step 2

aCheck if the paper loaded is supported.

Note: If paper is not supported, then load a supported paper.

bPrint the document.

Is the print crooked or skewed?

Go to step 3. The problem is

solved.

Step 3

aCheck the pick tire in the tray for signs of damage and

contamination, and replace if necessary.

bPrint the document.

Is the print crooked or skewed?

Contact customer

support.

The problem is

solved.

Repeating defects

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

Using the Print Quality Test Pages, check if the distance between

the repeating defects is equal to any of the following:

•97 mm (3.82 in.)

•47 mm (1.85 in.)

•38 mm (1.5 in.)

Does the distance between the repeating defects match any of the

measurements?

Go to step 2. Take note of the

distance, and then

contact customer

support.

Troubleshooting 103

Action Yes No

Step 2

aReplace the imaging unit.

bPrint the document.

Do the repeating defects appear?

Contact customer

support.

The problem is

solved.

Solid black pages

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the toner cartridge is not supported, then install a

supported one.

bPrint the document.

Is the printer printing solid black pages?

Go to step 2. The problem is

solved.

Step 2

aRemove, and then insert the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bPrint the document.

Is the printer printing solid black pages?

Go to step 3. The problem is

solved.

Troubleshooting 104

Action Yes No

Step 3

aRemove the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bRemove any packing material that is stuck on the imaging unit.

Note: Make sure to remove any obstruction between the

charge roller and photoconductor drum.

cInsert the imaging unit.

dPrint the document.

Is the printer printing solid black pages?

Go to step 4. The problem is

solved.

Step 4

Check the imaging unit for signs of damage.

Is the imaging unit free from damage?

Contact customer

support.

Go to step 5.

Step 5

aReplace the imaging unit.

bPrint the document.

Is the printer printing solid black pages?

Contact customer

support.

The problem is

solved.

Text or images cut o

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Troubleshooting 105

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the toner cartridge is not supported, then install a

supported one.

bPrint the document.

Are text or images cut o?

Go to step 2. The problem is

solved.

Step 2

aRemove, and then insert the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bPrint the document.

Are text or images cut o?

Go to step 3. The problem is

solved.

Step 3

aRemove the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bRemove any packing material that is stuck on the imaging unit.

Note: Make sure to remove any obstruction between the

charge roller and photoconductor drum.

cInsert the imaging unit.

dPrint the document.

Are text or images cut o?

Go to step 4. The problem is

solved.

Step 4

aReplace the imaging unit.

bPrint the document.

Are text or images cut o?

Contact customer

support.

The problem is

solved.

Troubleshooting 106

Toner easily rubs o

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the toner cartridge is not supported, then install a

supported one.

bPrint the document.

Does the toner easily rub o?

Go to step 2. The problem is

solved.

Step 2

aDepending on your operating system, specify the paper type

from the Printing Preferences or Print dialog.

Notes:

•Make sure that the setting matches the paper loaded.

•You can also change the setting on the printer control

panel.

bPrint the document.

Does the toner easily rub o?

Contact customer

support.

The problem is

solved.

Vertical dark bands

Troubleshooting 107

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the toner cartridge is not supported, then install a

supported one.

bPrint the document.

Do vertical dark bands appear on prints?

Go to step 2. The problem is

solved.

Step 2

aRemove the toner cartridge, and then remove the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bInsert the imaging unit, and then insert the cartridge.

cPrint the document.

Do vertical dark bands appear on prints?

Go to step 3. The problem is

solved.

Step 3

aRemove the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bRemove any packing material that is stuck on the imaging unit.

Note: Make sure to remove any obstruction between the

charge roller and photoconductor drum.

cInsert the imaging unit.

dPrint the document.

Do vertical dark bands appear on prints?

Go to step 4. The problem is

solved.

Troubleshooting 108

Action Yes No

Step 4

aCheck if a bright light enters the right side of the printer, and

move the printer if necessary.

bPrint the document.

Do vertical dark bands appear on prints?

Contact customer

support.

The problem is

solved.

Vertical dark lines or streaks

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the toner cartridge is not supported, then install a

supported one.

bPrint the document.

Do vertical dark lines or streaks appear on prints?

Go to step 2. The problem is

solved.

Step 2

aRemove, and then reinstall the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light can cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bPrint the document.

Do vertical dark lines or streaks appear on prints?

Go to step 3. The problem is

solved.

Troubleshooting 109

Action Yes No

Step 3

aReplace the imaging unit.

bPrint the document.

Do vertical dark lines or streaks appear on prints?

Contact customer

support.

The problem is

solved.

Vertical dark streaks with print missing

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

Step 1

aRemove the imaging unit.

Warning—Potential Damage: Do not expose the imaging unit

to direct light for more than 10 minutes. Extended exposure

to light may cause print quality problems.

Warning—Potential Damage: Do not touch the

photoconductor drum under the imaging unit. Doing so may

aect the quality of future print jobs.

bRemove any packing material that is stuck on the imaging unit.

Note: Make sure to remove any obstruction between the

charge roller and photoconductor drum.

cInsert the imaging unit.

dPrint the document.

Do vertical dark streaks with missing images appear on prints?

Go to step 2. The problem is

solved.

Troubleshooting 110

Action Yes No

Step 2

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the toner cartridge is not supported, then install a

supported one.

bPrint the document.

Do vertical dark streaks with missing images appear on prints?

Contact customer

support.

The problem is

solved.

Vertical light bands

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Action Yes No

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the cartridge is not supported, then install a

supported one.

bPrint the document.

Do vertical light bands appear on prints?

Contact customer

support.

The problem is

solved.

Vertical white lines

Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to

navigate through the settings.

Troubleshooting 111

Action Yes No

Step 1

aCheck if the printer is using a genuine and supported Lexmark

toner cartridge.

Note: If the cartridge is not supported, then install a

supported one.

bPrint the document.

Do vertical white lines appear on prints?

Go to step 2. The problem is

solved.

Step 2

aDepending on your operating system, specify the paper type

from the Printing Preferences or Print dialog.

Notes:

•Make sure that the setting matches the paper loaded.

•You can also change the setting on the printer control

panel.

bPrint the document.

Do vertical white lines appear on prints?

Contact customer

support.

The problem is

solved.

Slow printing

Action Yes No

Step 1

aMake sure that the printer is not in Eco‑Mode and Quiet Mode.

bPrint the document.

Is the printer still printing slow?

Go to step 2. The problem is

solved.

Step 2

aDepending on your operating system, specify the paper type

from the Printing Preferences or Print dialog.

Notes:

•Make sure that the setting matches the paper loaded in

the tray.

•You can also change the setting from the Paper menu on

the printer control panel.

bPrint the document.

Is the printer still printing slow?

Go to step 3. The problem is

solved.

Troubleshooting 112

Action Yes No

Step 3

aReduce the number of pages to print.

bPrint the document.

Is the printer still printing slow?

Go to step 4. The problem is

solved.

Step 4

aConnect the printer cable securely to the printer and the

computer, print server, option, or other network device.

bPrint the document.

Is the printer still printing slow?

Go to step 5. The problem is

solved.

Step 5

aFrom the Quality menu on the control panel, set Print

Resolution to 600 dpi.

bPrint the document.

Is the printer still printing slow?

Go to step 6. The problem is

solved.

Step 6

aMake sure that the printer is not overheating.

Notes:

•Allow the printer to cool down after a very long print job.

•Observe the recommended ambient temperature for the

printer. For more information, see “Selecting a location

for the printer” on page 9.

bPrint the document.

Is the printer still printing slow?

Go to step 7. The problem is

solved.

Step 7

aAdd more printer memory.

bPrint the document.

Is the printer still printing slow?

Contact customer

support.

The problem is

solved.

Print jobs do not print

Action Yes No

Step 1

aFrom the document you are trying to print, open the Print

dialog, and then check if you have selected the correct printer.

bPrint the document.

Is the document printed?

The problem is

solved.

Go to step 2.

Troubleshooting 113

Action Yes No

Step 2

aCheck if the printer is on.

bResolve any error messages that appear on the display.

cPrint the document.

Is the document printed?

The problem is

solved.

Go to step 3.

Step 3

aCheck if the ports are working and if the cables are securely

connected to the computer and the printer.

For more information, see the setup documentation that came

with the printer.

bPrint the document.

Is the document printed?

The problem is

solved.

Go to step 4.

Step 4

aTurn o the printer, wait for about 10 seconds, and then turn on

the printer.

bPrint the document.

Is the document printed?

The problem is

solved.

Go to step 5.

Step 5

aRemove, and then reinstall the print driver.

bPrint the document.

Is the document printed?

The problem is

solved.

Contact customer

support.

The printer is not responding

Action Yes No

Step 1

Connect the power cord to the electrical outlet.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or

electrical shock, connect the power cord to an appropriately

rated and properly grounded electrical outlet that is near the

product and easily accessible.

Is the printer responding?

The problem is

solved.

Go to step 2.

Step 2

Check if the electrical outlet is turned o by a switch or breaker.

Is the electrical outlet turned o by a switch or breaker?

Turn on the switch or

reset the breaker.

Go to step 3.

Troubleshooting 114

Action Yes No

Step 3

Check if the printer is on.

Is the printer on?

Go to step 4. Turn on the printer.

Step 4

Check if the printer is in sleep or hibernate mode.

Is the printer in sleep or hibernate mode?

Press the power

button to wake the

printer.

Go to step 5.

Step 5

Check if the cables connecting the printer and the computer are

inserted in the correct ports.

Are the cables inserted in the correct ports?

Go to step 6. Make sure to match

the following:

•The USB cable

with the USB port

on the printer

•The Ethernet

cable with the

Ethernet port on

the printer

Step 6

Turn o the printer, reinstall the hardware options, and then turn it

back on.

For more information, see the documentation that came with the

option.

Is the printer responding?

The problem is

solved

Go to step 7.

Step 7

Install the correct print driver.

Is the printer responding?

The problem is

solved

Go to step 8.

Step 8

Turn o the printer, wait for about 10 seconds, and then turn it back

on.

Is the printer responding?

The problem is

solved.

Contact customer

support.

Adjusting toner darkness

1From the control panel, navigate to:

Settings > Print > Quality > Toner Darkness

For non-touch-screen printer models, press to navigate through the settings.

2Adjust the setting.

3Apply the changes.

Troubleshooting 115

Job prints from the wrong tray or on the wrong paper

Action Yes No

Step 1

aCheck if you are printing on the correct paper.

bPrint the document.

Is the document printed on the correct paper?

Go to step 2. Load the correct

paper size and paper

type.

Step 2

aDepending on your operating system, specify the paper size

and paper type from the Printing Preferences or Print dialog.

Note: You can also change the settings on the printer control

panel. Navigate to:

Settings > Paper > Tray Conﬁguration > Paper Size/Type

For non‑touch‑screen printer models, press to navigate

through the settings.

bMake sure that the settings match the paper loaded.

cPrint the document.

Is the document printed on the correct paper?

The problem is

solved.

Go to step 3.

Step 3

aCheck if the trays are linked.

For more information, see “Linking trays” on page 17.

bPrint the document.

Is the document printed from the correct tray?

The problem is

solved.

Contact customer

support.

Contacting customer support

Before contacting customer support, make sure to have the following information:

•Printer problem

•Error message

•Printer model type and serial number

Go to http://support.lexmark.com to receive e‑mail or chat support, or browse through the library of manuals,

support documentation, drivers, and other downloads.

Technical support via telephone is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries

or regions, go to http://support.lexmark.com.

Troubleshooting 116

Upgrading and migrating

Hardware

Available internal options

•User ﬂash

•Font cards

Accessing the controller board

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn

the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any

other devices attached to the printer, then turn them o as well, and unplug any cables going into the

printer.

1Turn o the printer.

2Unplug the power cord from the electrical outlet, and then from the printer.

3Using a ﬂat-head screwdriver, open the controller board access cover.

Warning—Potential Damage: Controller board electronic components are easily damaged by static

electricity. Touch a metal surface on the printer before touching any controller board components or

connectors.

Upgrading and migrating 117

4Close the access cover.

5Connect the power cord to the printer, and then to the electrical outlet.

6Turn on the printer.

Installing a memory card

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn

the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any

other devices attached to the printer, then turn them o as well, and unplug any cables going into the

printer.

1Turn o the printer.

2Unplug the power cord from the electrical outlet, and then from the printer.

3Open the controller board access cover.

Warning—Potential Damage: Controller board electronic components are easily damaged by static

electricity. Touch a metal surface on the printer before touching any controller board components or

connectors.

Upgrading and migrating 118

4Unpack the memory card.

Warning—Potential Damage: Do not touch the connection points along the edge of the card.

5Insert the memory card until it clicks into place.

6Close the controller board access cover.

7Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily

accessible.

8Turn on the printer.

Upgrading and migrating 119

Installing an optional card

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn

the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any

other devices attached to the printer, then turn them o as well, and unplug any cables going into the

printer.

1Turn o the printer.

2Unplug the power cord from the electrical outlet, and then from the printer.

3Open the controller board access cover.

Warning—Potential Damage: Controller board electronic components are easily damaged by static

electricity. Touch a metal surface on the printer before touching any components or connectors.

4Unpack the optional card.

Warning—Potential Damage: Do not touch the connection points along the edge of the card.

Upgrading and migrating 120

5Push the card ﬁrmly into place.

Note: The entire length of the connector on the card must touch and be ﬂush against the controller

board.

Warning—Potential Damage: Improper installation of the card may cause damage to the card and the

controller board.

6Close the access cover.

7Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily

accessible.

8Turn on the printer.

Installing optional trays

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn

the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any

other devices attached to the printer, then turn them o as well, and unplug any cables going into the

printer.

1Turn o the printer.

2Unplug the power cord from the electrical outlet, and then from the printer.

Upgrading and migrating 121

3Unpack the optional tray, and then remove all packing material.

Note: If optional trays are already installed, then unlock them from the printer before lifting the printer. Do

not try to lift the printer and trays at the same time.

4Align the printer with the optional tray, and then lower the printer until it clicks into place.

CAUTION—POTENTIAL INJURY: If the printer weight is greater than 18 kg (40 lb), then it requires

two or more trained personnel to lift it safely.

5Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY: To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily

accessible.

6Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see “Adding available

options in the print driver” on page 123.

Software

Supported operating systems

Using the software CD, you can install the printer software on the following operating systems:

•Windows 10

•Windows 8.1

•Windows Server 2012 R2

•Windows Server 2012

Upgrading and migrating 122

•Windows 7 SP1

•Windows Server 2008 R2 SP1

•Windows Server 2008 SP2

•Windows Vista SP2

•Mac OS X version 10.7 or later

•Red Hat Enterprise Linux WS

•openSUSE Linux

•SUSE Linux Enterprise Server

•Debian GNU/Linux

•Ubuntu

•Fedora

•IBM AIX

•Oracle Solaris SPARC

•Oracle Solaris x86

Notes:

•For Windows operating systems, the print drivers and utilities are supported in both 32‑ and 64‑bit

versions.

•For drivers and utilities that are compatible with Mac OS X version 10.6 or earlier and for speciﬁc

supported Linux or UNIX operating system versions, go to http://support.lexmark.com.

•For more information on software compatibility with all other operating systems, contact customer

support.

Installing the printer software

1Obtain a copy of the software installer package.

•From the software CD that came with your printer.

•Go to http://support.lexmark.com, and then select your printer and operating system.

2Run the installer, and then follow the instructions on the computer screen.

3For Macintosh users, add the printer.

Note: Obtain the printer IP address from the TCP/IP section in the Network/Ports menu.

Adding available options in the print driver

For Windows users

1Open the printers folder.

2Select the printer you want to update, and then do either of the following:

•For Windows 7 or later, select Printer properties.

•For earlier versions, select Properties.

3Navigate to the Conﬁguration tab, and then select Update Now ‑ Ask Printer.

4Apply the changes.

Upgrading and migrating 123

For Macintosh users

1From System Preferences in the Apple menu, navigate to your printer, and then select Options & Supplies.

2Navigate to the list of hardware options, and then add any installed options.

3Apply the changes.

Firmware

Exporting or importing a conﬁguration ﬁle

You can export the conﬁguration settings of your printer into a text ﬁle, and then import the ﬁle to apply the

settings to other printers.

1Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

•View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

•If you are using a proxy server, then temporarily disable it to load the web page correctly.

2Export or import a conﬁguration ﬁle for one or multiple applications.

For one application

aFrom the Embedded Web Server, click Apps > the application that you want > Conﬁgure.

bClick Export or Import.

For multiple applications

aFrom the Embedded Web Server, click Export Conﬁguration or Import Conﬁguration.

bFollow the instructions on the screen.

Updating ﬁrmware

Some applications require a minimum device ﬁrmware level to operate correctly.

For more information on updating the device ﬁrmware, contact your Lexmark representative.

1From the Embedded Web Server, click Settings > Device > Update Firmware.

2Browse to locate the required ﬂash ﬁle.

3Apply the changes.

Upgrading and migrating 124

Notices

Product information

Product name:

Lexmark B2338dw, B2442dw; Lexmark M1242; Lexmark MS321dn; Lexmark MS421dn, MS421dw

Machine type:

4600

Model(s):

230, 238, 430, 438, 490

Edition notice

April 2018

The following paragraph does not apply to any country where such provisions are inconsistent with local

law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of

express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made

to the information herein; these changes will be incorporated in later editions. Improvements or changes in the

products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to

make these available in all countries in which it operates. Any reference to a product, program, or service is

not intended to state or imply that only that product, program, or service may be used. Any functionally

equivalent product, program, or service that does not infringe any existing intellectual property right may be

used instead. Evaluation and veriﬁcation of operation in conjunction with other products, programs, or services,

except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, visit http://support.lexmark.com.

For information on supplies and downloads, visit www.lexmark.com.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is deﬁned in 48

C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are

used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R.

227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software

Documentation are licensed to the U.S. Government end users (a) only as Commercial Items and (b) with only

those rights as are granted to all other end users pursuant to the terms and conditions herein.

Notices 125

Trademarks

Lexmark, the Lexmark logo, and MarkNet are trademarks or registered trademarks of Lexmark International,

Inc. in the United States and/or other countries.

Google Cloud Print and Google Chrome are trademarks of Google Inc.

Macintosh, the Mac logo, and Safari are trademarks of Apple Inc.

Microsoft, Windows, and Internet Explorer are either registered trademarks or trademarks of the Microsoft group

of companies in the United States and other countries.

Mopria®, the Mopria® logo, and the Mopria® Alliance logo are registered trademarks and service marks of Mopria

Alliance, Inc. in the United States and other countries. Unauthorized use is strictly prohibited.

PCL® is a registered trademark of the Hewlett-Packard Company. PCL is Hewlett-Packard Company’s

designation of a set of printer commands (language) and functions included in its printer products. This printer

is intended to be compatible with the PCL language. This means the printer recognizes PCL commands used

in various application programs, and that the printer emulates the functions corresponding to the commands.

PostScript is a registered trademark of Adobe Systems Incorporated in the United States and/or other countries.

All other trademarks are the property of their respective owners.

AirPrint and the AirPrint logo are trademarks of Apple, Inc.

Licensing notices

All licensing notices associated with this product can be viewed from the CD:\NOTICES directory of the

installation software CD.

Noise emission levels

The following measurements were made in accordance with ISO 7779 and reported in conformance with ISO

9296.

Note: Some modes may not apply to your product.

1-meter average sound pressure, dBA

Printing One-sided: 54 (MS321, B2338), 55

(MS421, M1242, B2442); Two-sided:

53 (MS321, B2338), 54 (MS421,

M1242, B2442)

Scanning N/A

Copying N/A

Ready 14

Values are subject to change. See www.lexmark.com for current values.

Notices 126

Waste from Electrical and Electronic Equipment (WEEE) directive

The WEEE logo signiﬁes speciﬁc recycling programs and procedures for electronic products in countries of the

European Union. We encourage the recycling of our products.

If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your

local sales oce phone number.

India E-Waste notice

This product complies with the India E-Waste (Management and Handling) Rules, 2011, which prohibit use of

lead, mercury, hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers in

concentrations exceeding 0.1％ by weight and 0.01% by weight for cadmium, except for the exemption set in

Schedule II of the Rules.

Product disposal

Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local

authorities for disposal and recycling options.

Static sensitivity notice

This symbol identiﬁes static-sensitive parts. Do not touch the areas near these symbols without ﬁrst touching

a metal surface in an area away from the symbol.

Notices 127

ENERGY STAR

Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certiﬁed to

comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as conﬁgured when shipped

by Lexmark.

Temperature information

Ambient operating temperature 10 to 32°C (50 to 90°F)

Shipping temperature -20 to 40°C (-4 to 104°F)

Storage temperature and relative humidity 0 to 40°C (32 to 104°F)

8 to 80% RH

Laser notice

The printer is certiﬁed in the U.S. to conform to the requirements of DHHS 21 CFR, Chapter I, Subchapter J for

Class I (1) laser products, and elsewhere is certiﬁed as a Class I laser product conforming to the requirements

of IEC 60825-1: 2014.

Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) AlGaInP

laser that is nominally 15 milliwatts operating in the wavelength region of 650–670 nanometers and enclosed

in a non-serviceable printhead assembly. The laser system and printer are designed so there is never any human

access to laser radiation above a Class I level during normal operation, user maintenance, or prescribed service

conditions.

Laser advisory label

A laser notice label may be axed to this printer as shown:

DANGER - Invisible laser radiation when cartridges are removed and interlock defeated. Avoid exposure to laser

beam.

PERIGO - Radiação a laser invisível será liberada se os cartuchos forem removidos e o lacre rompido. Evite a

exposição aos feixes de laser.

Opasnost - Nevidljivo lasersko zračenje kada su kasete uklonjene i poništena sigurnosna veza. Izbjegavati izlaganje

zracima.

NEBEZPEČÍ - Když jsou vyjmuty kazety a je odblokována pojistka, ze zařízení je vysíláno neviditelné laserové záření.

Nevystavujte se působení laserového paprsku.

FARE - Usynlig laserstråling, når patroner ernes, og spærreanordningen er slået fra. Undgå at blive udsat for

laserstrålen.

GEVAAR - Onzichtbare laserstraling wanneer cartridges worden verwijderd en een vergrendeling wordt genegeerd.

Voorkom blootstelling aan de laser.

Notices 128

DANGER - Rayonnements laser invisibles lors du retrait des cartouches et du déverrouillage des loquets. Eviter

toute exposition au rayon laser.

VAARA - Näkymätöntä lasersäteilyä on varottava, kun värikasetit on poistettu ja lukitus on auki. Vältä lasersäteelle

altistumista.

GEFAHR - Unsichtbare Laserstrahlung beim Herausnehmen von Druckkassetten und oener Sicherheitssperre.

Laserstrahl meiden.

ΚΙΝΔΥΝΟΣ - Έκλυση αόρατης ακτινοβολίας laser κατά την αφαίρεση των κασετών και την απασφάλιση της

μανδάλωσης. Αποφεύγετε την έκθεση στην ακτινοβολία laser.

VESZÉLY – Nem látható lézersugárzás fordulhat elő a patronok eltávolításakor és a zárószerkezet felbontásakor.

Kerülje a lézersugárnak való kitettséget.

PERICOLO - Emissione di radiazioni laser invisibili durante la rimozione delle cartucce e del blocco. Evitare l

´esposizione al raggio laser.

FARE – Usynlig laserstråling når kassettene tas ut og sperren er satt ut av spill. Unngå eksponering for laserstrålen.

NIEBEZPIECZEŃSTWO - niewidzialne promieniowanie laserowe podczas usuwania kaset i blokady. Należy unikać

naświetlenia promieniem lasera.

ОПАСНО! Невидимое лазерное излучение при извлеченных картриджах и снятии блокировки. Избегайте

воздействия лазерных лучей.

Pozor – Nebezpečenstvo neviditeľného laserového žiarenia pri odobratých kazetách a odblokovanej poistke.

Nevystavujte sa lúčom.

PELIGRO: Se producen radiaciones láser invisibles al extraer los cartuchos con el interbloqueo desactivado. Evite

la exposición al haz de láser.

FARA – Osynlig laserstrålning när patroner tas ur och spärrmekanismen är upphävd. Undvik exponering för

laserstrålen.

危险 - 当移除碳粉盒及互锁失效时会产生看不见的激光辐射，请避免暴露在激光光束下。

危險 - 移除碳粉匣與安全連鎖開關失效時會產生看不見的雷射輻射。請避免曝露在雷射光束下。

危険 - カートリッジが取り外され、内部ロックが無効になると、見えないレーザー光が放射されます。このレ

ーザー光に当たらないようにしてください。

Power consumption

Product power consumption

The following table documents the power consumption characteristics of the product.

Note: Some modes may not apply to your product.

Mode Description Power consumption (Watts)

Printing The product is generating hard‑copy output from

electronic inputs.

One-sided: 520 (MS321, B2338), 570

(MS421, M1242, B2442); Two-sided: 315

(MS321, B2338), 345 (MS421, M1242,

B2442)

Copy The product is generating hard‑copy output from

hard‑copy original documents.

N/A

Scan The product is scanning hard‑copy documents. N/A

Ready The product is waiting for a print job. 7 (MS321, B2338), 7.5 (MS421, M1242,

B2442)

Notices 129

Mode Description Power consumption (Watts)

Sleep Mode The product is in a high‑level energy‑saving mode. 1.8 (MS321, B2338), 1.9 (MS421, M1242,

B2442)

Hibernate The product is in a low‑level energy‑saving mode. 0.1

O The product is plugged into an electrical outlet, but the

power switch is turned o.

0.1

The power consumption levels listed in the previous table represent time-averaged measurements.

Instantaneous power draws may be substantially higher than the average.

Values are subject to change. See www.lexmark.com for current values.

Sleep Mode

This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by

lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged

after this product is not used for a speciﬁed period of time, called the Sleep Mode Timeout.

Factory default Sleep Mode Timeout for this product (in minutes): 15

By using the conﬁguration menus, the Sleep Mode Timeout can be modiﬁed between 1 minute and 120 minutes.

Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response

time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more

energy.

Hibernate Mode

This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in

Hibernate Mode, all other systems and devices are powered down safely.

The Hibernate mode can be entered in any of the following methods:

•Using the Hibernate Timeout

•Using the Schedule Power modes

Factory default Hibernate Timeout for this product in all countries or regions 3 days

The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modiﬁed

between one hour and one month.

O mode

If this product has an o mode which still consumes a small amount of power, then to completely stop product

power consumption, disconnect the power supply cord from the electrical outlet.

Total energy usage

It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are

provided in power units of Watts, the power consumption should be multiplied by the time the product spends

in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's

energy usage.

Notices 130

Regulatory notices for wireless products

This section contains regulatory information that applies only to wireless models.

If in doubt as to whether your model is a wireless model, go to http://support.lexmark.com.

Modular component notice

This product may contain the following modular component(s):

Lexmark Regulatory Type/LEX-M01-005; FCC ID: IYLLEXM01005; Industry Canada IC: 2376A-M01005

Exposure to radio frequency radiation

The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other

regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and

any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.

Industry Canada (Canada)

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and

maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio

interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically

radiated power (EIRP) is not more than that necessary for successful communication.

This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following

two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,

including interference that may cause undesired operation of the device.

To prevent radio interference to the licensed service and to reduce the potential for harmful interference to co-

channel mobile satellite systems, this device is intended to be operated indoors and away from windows to

provide maximum shielding.

High-power radars are allocated as primary users (i.e., priority users) of the bands 5250–5350MHz and 5650–

5850MHz. These radars could cause interference and/or damage to LE-LAN devices.

Industrie Canada (Canada)

Selon la réglementation d'Industrie Canada, l'émetteur radio ne fonctionne qu'avec une antenne dont le type

et le gain maximal (ou inférieur) ont été approuvés par Industrie Canada. Pour réduire les interférences radio

potentielles auprès d'autres utilisateurs, le type d'antenne et son gain doivent être choisis de telle sorte que la

puissance isotrope rayonnée équivalente (PIRE) ne soit pas supérieure à ce qui est nécessaire pour assurer la

réussite de la communication.

Cet appareil est conforme aux normes RSS exemptes de licence d'Industrie Canada. Son fonctionnement est

soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences et (2) il doit accepter

toutes les interférences, y compris les celles qui peuvent entraîner un fonctionnement indésirable.

Aﬁn de prévenir les interférences radio des services sous licence et pour réduire le risque d'interférences

nuisibles aux systèmes de satellites mobiles utilisant les mêmes canaux, cet appareil est destiné à être utilisé

à l’intérieur et loin des fenêtres aﬁn de fournir une protection maximale.

Notices 131

Les radars à haute puissance sont déﬁnis comme les utilisateurs principaux (p. ex., utilisateurs prioritaires) dans

les bandes de 5250-5350 MHz et 5650-5850 MHz. Ces radars peuvent causer des interférences ou des

dommages aux appareils RELOC-EL.

Federal Communications Commission (FCC) compliance information

statement

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

The FCC Class B limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

•Consult your point of purchase or service representative for additional suggestions.

The manufacturer is not responsible for radio or television interference caused by using other than

recommended cables or by unauthorized changes or modiﬁcations to this equipment. Unauthorized changes

or modiﬁcations could void the user's authority to operate this equipment.

Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing

device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach

or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a

violation of FCC regulations.

Any questions regarding this compliance information statement should be directed to:

Director of Lexmark Technology & Services

Lexmark International, Inc.

740 West New Circle Road

Lexington, KY 40550

Telephone: (859) 232–3000

E-mail: regulatory@lexmark.com

Industry Canada compliance statement

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Standard ICES-003.

Avis de conformité aux normes de l’industrie du Canada

Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux

équipements pouvant causer des interférences NMB-003.

Notices 132

日本の VCCI 規定

製品にこのマークが表示されている場合、次の要件を満たしています。

この装置は、クラス B 情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この

装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。

取扱説明書に従って正しい取り扱いをしてください。

VCCI-B

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directives 2014/30/EU, 2014/35/EU,

2009/125/EC, and 2011/65/EU on the approximation and harmonization of the laws of the Member States

relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage

limits, the ecodesign of energy-related products, and on the restrictions of use of certain hazardous substances

in electrical and electronic equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY,

40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön

fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the

Directives is available upon request from the Authorized Representative or may be obtained at

www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.

This product satisﬁes the Class B limits of EN 55022 and EN55032 and safety requirements of EN 60950‑1 or

EN 62368-1.

European Community (EC) directives conformity

This product is in conformity with the protection requirements of EC Council directive 2014/53/EU on the

approximation and harmonization of the laws of the Member States relating to radio equipment.

The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY,

40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön

fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the

Directives is available upon request from the Authorized Representative or may be obtained at

www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.

Compliance is indicated by the CE marking:

Notices 133

Restrictions

This radio equipment is restricted to indoor use only. Outdoor use is prohibited. This restriction applies to all

the countries listed in the table below:

AT BE BG CH CY CZ DE DK EE

EL ES FI FR HR HU IE IS IT

LI LT LU LV MT NL NO PL PT

RO SE SI SK TR UK

EU statement of radio transmitter operational frequency bands and maximum RF power

This radio product transmits in either the 2.4GHz (2.412–2.472 GHz in the EU) or 5GHz (5.15–5.35, 5.47–5.725

in the EU) bands. The maximum transmitter EIRP power output, including antenna gain, is ≤ 20dBm for both

bands.

STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS,

LEXMARK LED PRINTERS, AND LEXMARK MULTIFUNCTION LASER

PRINTERS

Lexmark International, Inc., Lexington, KY

This limited warranty applies to the United States and Canada. For customers outside the U.S., refer to the

country-speciﬁc warranty information that came with your product.

This limited warranty applies to this product only if it was originally purchased for your use, and not for resale,

from Lexmark or a Lexmark Remarketer, referred to in this statement as “Remarketer.”

Limited warranty

Lexmark warrants that this product:

—Is manufactured from new parts, or new and serviceable used parts, which perform like new parts

—Is, during normal use, free from defects in material and workmanship

If this product does not function as warranted during the warranty period, contact a Remarketer or Lexmark for

repair or replacement (at Lexmark's option).

If this product is a feature or option, this statement applies only when that feature or option is used with the

product for which it was intended. To obtain warranty service, you may be required to present the feature or

option with the product.

Notices 134

If you transfer this product to another user, warranty service under the terms of this statement is available to

that user for the remainder of the warranty period. You should transfer proof of original purchase and this

statement to that user.

Limited warranty service

The warranty period starts on the date of original purchase as shown on the purchase receipt and ends 12

months later provided that the warranty period for any supplies and for any maintenance items included with

the printer shall end earlier if it, or its original contents, are substantially used up, depleted, or consumed. Fuser

Units, Transfer/Transport Units, Paper Feed items, if any, and any other items for which a Maintenance Kit is

available are substantially consumed when the printer displays a “Life Warning” or “Scheduled Maintenance”

message for such item.

To obtain warranty service you may be required to present proof of original purchase. You may be required to

deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a Lexmark

designated location. You are responsible for loss of, or damage to, a product in transit to the Remarketer or the

Lexmark designated location.

When warranty service involves the exchange of a product or part, the item replaced becomes the property of

the Remarketer or Lexmark. The replacement may be a new or repaired item.

The replacement item assumes the remaining warranty period of the original product.

Replacement is not available to you if the product you present for exchange is defaced, altered, in need of a

repair not included in warranty service, damaged beyond repair, or if the product is not free of all legal

obligations, restrictions, liens, and encumbrances.

As part of your warranty service and/or replacement, Lexmark may update the ﬁrmware in your printer to the

latest version. Firmware updates may modify printer settings and cause counterfeit and/or unauthorized

products, supplies, parts, materials (such as toners and inks), software, or interfaces to stop working. Authorized

use of genuine Lexmark products will not be impacted.

Before you present this product for warranty service, remove all print cartridges, programs, data, and removable

storage media (unless directed otherwise by Lexmark).

For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in your area

contact Lexmark on the World Wide Web.

Remote technical support is provided for this product throughout its warranty period. For products no longer

covered by a Lexmark warranty, technical support may not be available or only be available for a fee.

Extent of limited warranty

Lexmark does not warrant uninterrupted or error-free operation of any product or the durability or longevity of

prints produced by any product.

Warranty service does not include repair of failures caused by:

—Modiﬁcation or unauthorized attachments

—Accidents, misuse, abuse or use inconsistent with Lexmark user’s guides, manuals, instructions or guidance

—Unsuitable physical or operating environment

—Maintenance by anyone other than Lexmark or a Lexmark authorized servicer

—Operation of a product beyond the limit of its duty cycle

—Use of printing media outside of Lexmark speciﬁcations

Notices 135

—Refurbishment, repair, reﬁlling or remanufacture by a third party of products, supplies or parts

—Products, supplies, parts, materials (such as toners and inks), software, or interfaces not furnished by Lexmark

TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER LEXMARK NOR ITS THIRD PARTY SUPPLIERS

OR REMARKETERS MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS

OR IMPLIED, WITH RESPECT TO THIS PRODUCT, AND SPECIFICALLY DISCLAIM THE IMPLIED

WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND

SATISFACTORY QUALITY. ANY WARRANTIES THAT MAY NOT BE DISCLAIMED UNDER APPLICABLE LAW

ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL

APPLY AFTER THIS PERIOD. ALL INFORMATION, SPECIFICATIONS, PRICES, AND SERVICES ARE SUBJECT

TO CHANGE AT ANY TIME WITHOUT NOTICE.

Limitation of liability

Your sole remedy under this limited warranty is set forth in this document. For any claim concerning performance

or nonperformance of Lexmark or a Remarketer for this product under this limited warranty, you may recover

actual damages up to the limit set forth in the following paragraph.

Lexmark's liability for actual damages from any cause whatsoever will be limited to the amount you paid for the

product that caused the damages. This limitation of liability will not apply to claims by you for bodily injury or

damage to real property or tangible personal property for which Lexmark is legally liable. IN NO EVENT WILL

LEXMARK BE LIABLE FOR ANY LOST PROFITS, LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER

ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the

possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.

This limitation of remedies also applies to claims against any Suppliers and Remarketers of Lexmark. Lexmark's

and its Suppliers' and Remarketers' limitations of remedies are not cumulative. Such Suppliers and Remarketers

are intended beneﬁciaries of this limitation.

Additional rights

Some states do not allow limitations on how long an implied warranty lasts, or do not allow the exclusion or

limitation of incidental or consequential damages, so the limitations or exclusions contained above may not

apply to you.

This limited warranty gives you speciﬁc legal rights. You may also have other rights that vary from state to state.

Notices 136

Index

accessing the controller

board 117

adding hardware options

print driver 123

adding internal options

print driver 123

adjusting brightness of printer

display 72

adjusting toner darkness 115

AirPrint

using 22

attaching cables 11

avoiding paper jams 74

blank pages 89

brightness of printer display

adjusting 72

cannot open Embedded Web

Server 84

card stock

size 14

checking the printer

connectivity 85

checking the status

parts 57

supplies 57

cleaning

exterior of the printer 56

interior of the printer 56

cleaning the printer 56

clearing jam

in door A 76

conﬁguring supply

notiﬁcations 59

conﬁguring Universal paper

settings 14

connecting the printer

to a wireless network 55

connecting to a wireless network

using PIN method 55

using Push Button method 55

conserving supplies 72

contacting customer support 116

control panel

buttons 12

indicator light 12

using 12

controller board

accessing 117

crooked print 102

customer support

contacting 116

deactivating the Wi‑Fi

network 56

documents, printing

from a computer 21

from a mobile device 21

dots on print 100

Eco‑Mode

setting 71

emission

notices 126, 131, 132, 133

envelopes

size 14

environmental settings 71

erasing printer memory 53, 54

Ethernet menu 43

Ethernet port 11

exporting a conﬁguration ﬁle

using the Embedded Web

Server 124

FCC notices 131

ﬁnding more information about

the printer 8

ﬁrmware

update 124

folder paper 93

font sample list

printing 22

Google Cloud Print

using 21

hardware options

trays 121

hardware options, adding

print driver 123

Hibernate mode

setting 71

identifying jam locations 75

imaging unit

ordering 59

replacing 62

importing a conﬁguration ﬁle

using the Embedded Web

Server 124

indicator light

understanding the status 13

installing a memory card 118

installing an optional card 120

installing the printer software 123

internal options

font cards 117

installing 120

memory card 118

user ﬂash 117

internal options, adding

print driver 123

jams

avoiding 74

jams, clearing

in the duplex unit 81

in the multipurpose feeder 82

in the standard bin 80

trays 82

labels

size 14

Lexmark Mobile Print

using 21

linking trays 17

multipurpose feeder 16

Index 137

loading envelopes

in the multipurpose feeder 16

loading trays 14

locating paper jams 75

locating the security slot 53

Media Types menu 39

memory card

installing 118

802.1x 47

About this Printer 30

Conﬁg Menu 27

Device 51

Ethernet 43

Google Cloud Print 49

HTML 37

HTTP/FTP Settings 48

Image 37

Information Sent to Lexmark 27

IPSec 47

Job Accounting 32

Layout 30

LPD Conﬁguration 47

Media Types 39

Menu Settings Page 51

Network 51

Network Overview 40

Notiﬁcations 24

Out of Service Erase 30

PCL 35

PDF 34

PostScript 34

Power Management 26

Preferences 23

Print 51

Quality 32

Remote Operator Panel 24

Restore Factory Defaults 27

Setup 31

SNMP 46

TCP/IP 44

ThinPrint 49

Tray Conﬁguration 38

Troubleshooting 51

Universal Setup 39

USB 49

Wi‑Fi Direct 50

XPS 34

menu map 23

Menu Settings Page

printing 52

menus

Wireless 40

mobile device

printing from 21, 22

Mopria Print Service

using 21

mottled print 100

moving the printer 9, 70

multipurpose feeder

loading 16

noise emission levels 126

Non‑Lexmark supply 86

non‑volatile memory 54

erasing 53

notices 126, 127, 128, 129, 130,

131, 132, 133

operating systems

supported 122

optional card

installing 120

ordering

imaging unit 59

toner cartridge 57

Out of Service Erase menu 30

paper jam in door A 76

paper jam in the duplex unit 81

paper jam in the multipurpose

feeder 82

paper jam in the rear door 79

paper jam in trays 82

paper jam, clearing

in the duplex unit 81

in the multipurpose feeder 82

in the rear door 79

trays 82

paper jams

avoiding 74

paper jams, clearing

in the standard bin 80

personal identiﬁcation number

method 55

pick roller assembly

replacing 66

pick tires

replacing 64

power button light

understanding the status 13

power cord socket 11

power saver modes

setting 71

print driver

hardware options, adding 123

print jobs not printed 113

Print Quality Test Pages 51

print quality troubleshooting

blank or white pages 89

crooked or skewed print 102

dark print 91

ﬁne lines are not printed

correctly 92

folded or wrinkled paper 93

gray background on prints 94

horizontal light bands 96

light print 98

mottled print and dots 100

paper curl 101

repeating defects 103

solid black pages 104

text or images cut o 105

toner easily rubs o 107

vertical dark bands 107

vertical dark lines or

streaks 109

vertical dark streaks with print

missing 110

vertical light bands 111

vertical white lines 111

print troubleshooting

collated printing does not

work 87

envelope seals when

printing 87

incorrect margins 97

jammed pages are not

reprinted 89

job prints from the wrong

tray 116

job prints on the wrong

paper 116

paper frequently jams 88

print jobs do not print 113

slow printing 112

tray linking does not work 88

printer

minimum clearances 9

Index 138

selecting a location 9

shipping 71

printer conﬁgurations 11

printer display

adjusting the brightness 72

printer hard disk memory 54

printer information

ﬁnding 8

printer is not responding 114

printer menus 23

printer messages

Non‑Lexmark supply 86

Replace cartridge, printer region

mismatch 85

printer ports 11

printer settings

restoring to factory defaults 54

printer software, installing 123

printer status 13

printing

font sample list 22

from a computer 21

from a mobile device 22

Menu Settings Page 52

printing a font sample list 22

printing a network setup

page 85

printing from a computer 21

Push Button method 55

recycling

Lexmark packaging 72

Lexmark products 72

toner cartridges 73

removing paper jam

in door A 76

Replace cartridge, printer region

mismatch 85

replacing supplies

imaging unit 62

toner cartridge 60

replacing the pick roller

assembly 66

replacing the pick tires 64

resetting

supply usage counters 86

resetting the supply usage

counters 86

Restore Factory Defaults

menu 27

restoring factory default

settings 54

safety information 5, 6, 7

securing printer memory 54

security slot

locating 53

selecting a location for the

printer 9

Setup menu 31

shipping the printer 71

skewed print 102

Sleep mode

setting 71

specialty media

setting the paper size 14

setting the paper type 14

statement of volatility 54

status of parts and supplies 57

supplies

conserving 72

supplies, ordering

toner cartridge 57

supply notiﬁcations

conﬁguring 59

supply usage counters

resetting 86

supported operating

systems 122

supported paper sizes 18

supported paper types 19

supported paper weights 20

toner cartridge

ordering 57

replacing 60

toner cartridges

recycling 73

toner darkness

adjusting 115

trays

installing 121

loading 14

troubleshooting

cannot open Embedded Web

Server 84

printer is not responding 114

troubleshooting, print

collated printing does not

work 87

envelope seals when

printing 87

incorrect margins 97

jammed pages are not

reprinted 89

job prints from the wrong

tray 116

job prints on the wrong

paper 116

paper frequently jams 88

print jobs do not print 113

slow printing 112

tray linking does not work 88

troubleshooting, print quality

blank or white pages 89

crooked or skewed print 102

dark print 91

ﬁne lines are not printed

correctly 92

folded or wrinkled paper 93

gray background on prints 94

horizontal light bands 96

light print 98

mottled print and dots 100

paper curl 101

repeating defects 103

solid black pages 104

text or images cut o 105

toner easily rubs o 107

vertical dark bands 107

vertical dark lines or

streaks 109

vertical dark streaks with print

missing 110

vertical light bands 111

vertical white lines 111

Universal paper settings

conﬁguring 14

unlinking trays 17

updating ﬁrmware

ﬂash ﬁle 124

USB printer port 11

using

genuine Lexmark parts 57

genuine Lexmark supplies 57

Index 139

vertical dark lines on prints 109

vertical streaks on prints 109

volatile memory 54

erasing 53

white lines 111

white pages 89

Wireless menu 40

wireless network

connecting the printer to 55

Wi‑Fi Protected Setup 55

wireless networking 55

Wi‑Fi network

deactivating 56

Wi‑Fi Protected Setup

wireless network 55

wrinkled paper 93

Index 140

Table of Contents

Lexmark B2442dw User Manual

Related Manuals