Table of Contents
- Contents
- Overview
- Safety information
- Environmental information
- Regulatory information
- Regulatory notices for telecommunication terminal equipment
- Notice to users of the US telephone network: FCC requirements
- Notice to users of the Canadian telephone network
- Notice to users of the New Zealand telephone network
- Japanese telecom notice
- Regulatory notices for wireless products
- Modular component notice
- Exposure to radio frequency radiation
- Industry Canada (Canada)
- European Community (EC) directives conformity
- Federal Communications Commission (FCC) compliance information statement
- Notice to users of Class A products in Brazil
- European Community (EC) directives conformity
- Radio interference notice
- Federal Communications Commission (FCC) compliance information statement
- European Community (EC) directives conformity
Lexmark C4150de User Manual
Displayed below is the user manual for C4150de by Lexmark which is a product in the Laser Printers category. This manual has pages.
Related Manuals
© 2016 Lexmark International, Inc.
All rights reserved.
GOVERNMENT END USERS
The Software Program and any related documentation are "Commercial Items," as that term is defined in 48 C.F.R. 2.101, "Computer
Software" and "Commercial Computer Software Documentation," as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202,
as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. 227.7 202-1 through 227.7207-4, as applicable, the Commercial Computer
Software and Commercial Software Documentation are licensed to the U.S. Government end users (a) only as Commercial Items
and (b) with only those rights as are granted to all other end users pursuant to the terms and conditions herein.
Trademarks
Lexmark and the Lexmark logo are trademarks or registered trademarks of Lexmark International, Inc. in the United States and/or
other countries.
All other trademarks are the property of their respective owners.
Contents
Overview........................................................................................................ 5
Safety information.........................................................................................7
Environmental information........................................................................ 10
Regulatory information...............................................................................15
Contents 3
Contents 4
Overview
This document contains basic safety, environmental, and regulatory information for your product. Some items
may not be applicable to your printer. For more information, go to http://support.lexmark.com.
Additional notices, legal, and licensing information associated with this product can be found in the Notices
section of the printer CD and the User's Guide.
Modified versions of source code covered by the GNU Lesser General Public License (LGPL) may be obtained
by contacting customer support.
Document change history
Date Changes
June 2018 •Added machine types and model numbers for the following products: B2865, C2240, C2325,
C2425, C2535, CS421, CS521, CS622, CX421, CX522, CX622, CX625, M5255, M5270,
MB2770, MC2325, MC2425, MC2535, MC2640, MS725, MS821, MS822, MS823, MS825,
MS826, MX721, MX722, MX725, MX822, MX826, XC2235, XC4240, XM5365, XM5370,
XM7355, XM7370.
•Updated the section on total energy usage.
•Updated the India E‑waste notice.
•Updated the Japanese telecom notice.
•Updated the Industry Canada (Canada) statement.
•Updated the Taiwan NCC RF notice statement.
•Updated the European Community (EC) directives conformity statement relating to radio
equipment.
April 2018 •Added information on using genuine Lexmark parts and supplies.
•Updated the notice to users of the U.S. telephone network.
•Updated the notice to users of the Canadian telephone network.
March 2018 •Added machine types and model numbers for the following products: B2338, B2442, B2546,
B2650, M1242, M1246, M3250, MB2338, MB2442, MB2546, MB2650, MS321, MS421, MS521,
MS621, MS622, MX321, MX421, MX521, MX522, MX622, XM1242, XM1246, XM3250.
•Updated the Taiwan RoHS information.
•Updated recycling information.
•Updated the notice to users of the New Zealand telephone network.
•Updated the Federal Communications Commission (FCC) compliance information statements.
August 2017 •Added machine types and model numbers for the following products: C9235, CS921, CS923,
CS927, CX920, CX921, CX922, CX923, CX924, CX927, XC9225, XC9235, XC9245, XC9255,
XC9265.
•Updated the fax notices.
•Added regulatory notices for wireless products.
June 2017 •Added machine types and model numbers for the following products: CS727, CS728, CS827,
CX727, CX827.
•Updated the Taiwan RoHS information.
•Updated the China RoHS information.
Overview 5
Date Changes
September 2016 •Updated the Conventions topic to add a caution type about rotating fan blades.
•Added the safety notice about rotating fan blades.
•Added the safety notice about printer models that are not suitable for use in locations where
children are likely to be present.
August 2016 •Added the XC4140 printer model.
•Updated the European Community directives and radio interference notices.
•Deleted European Union telecommunication notices.
March 2016 •Added machine types and model numbers for the following products: C4150, C6160, CS820,
CS720, CS725, CX725, CX820, CX825, CX860, XC6152, XC8155, XC8160, XC4150.
•Added a Class A notice for Brazil.
•Added Taiwan RoHS information.
•Revised the safety notice about connecting a telecommunications cord.
January 2016 Initial document release for the following products: C4150, C6160, CS820, CS720, CS725, CX725,
CX820, CX825, CX860, XC6152, XC8155, XC8160, XC4150.
Finding information about the printer
What are you looking for? Find it here
The latest supplemental information, updates, and customer
support:
•Documentation
•Driver downloads
•Live chat support
•E‑mail support
•Voice support
http://support.lexmark.com
Note: Select your country or region, and then select
your product to view the appropriate support site.
Support telephone numbers and hours of operation
for your country or region can be found on the
support website or on the printed warranty that came
with your printer.
Have the following information ready when you
contact customer support:
•Place and date of purchase
•Machine type and serial number
Warranty information Warranty information varies by country or region:
•In the U.S.—See the Statement of Limited
Warranty included with the printer, or go to
http://support.lexmark.com.
•In other countries and regions—See the printed
warranty that came with the printer.
Overview 6
Safety information
Conventions
Note: A note identifies information that could help you.
Warning: A warning identifies something that could damage the product hardware or software.
CAUTION: A caution indicates a potentially hazardous situation that could injure you.
Dierent types of caution statements include:
CAUTION—POTENTIAL INJURY: Indicates a risk of injury.
CAUTION—SHOCK HAZARD: Indicates a risk of electrical shock.
CAUTION—HOT SURFACE: Indicates a risk of burn if touched.
CAUTION—TIPPING HAZARD: Indicates a crush hazard.
CAUTION—PINCH HAZARD: Indicates a risk of being caught between moving parts.
CAUTION—ROTATING FAN BLADES: Indicates a risk of laceration from moving fan blades.
Product statements
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to
an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, use only the power cord
provided with this product or the manufacturer's authorized replacement.
CAUTION—POTENTIAL INJURY: Do not use this product with extension cords, multioutlet power strips,
multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be easily
overloaded by a laser printer and may result in a risk of fire, property damage, or poor printer
performance.
CAUTION—POTENTIAL INJURY: Only a Lexmark Inline Surge Protector that is properly connected
between the printer and the power cord provided with the printer may be used with this product. The
use of non-Lexmark surge protection devices may result in a risk of fire, property damage, or poor
printer performance.
CAUTION—POTENTIAL INJURY: To reduce the risk of fire, use only a 26 AWG or larger
telecommunications (RJ-11) cord when connecting this product to the public switched telephone
network. For users in Australia, the cord must be approved by the Australian Communications and Media
Authority.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product near
water or wet locations.
Safety information 7
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make
any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.
CAUTION—POTENTIAL INJURY: Do not cut, twist, bind, crush, or place heavy objects on the power
cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects
such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect
the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet
before inspecting it.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, make sure that all external
connections (such as Ethernet and telephone system connections) are properly installed in their marked
plug-in ports.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not use the fax feature during a
lightning storm.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock when cleaning the exterior of the
printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer before
proceeding.
CAUTION—POTENTIAL INJURY: If the printer weight is greater than 18 kg (40 lb), then it requires two or
more trained personnel to lift it safely.
CAUTION—POTENTIAL INJURY: When moving the printer, follow these guidelines to avoid personal
injury or printer damage:
•Make sure that all doors and trays are closed.
•Turn o the printer, and then unplug the power cord from the electrical outlet.
•Disconnect all cords and cables from the printer.
•If the printer has separate floor-standing optional trays or output options attached to it, then disconnect
them before moving the printer.
•If the printer has a caster base, then carefully roll it to the new location. Use caution when passing over
thresholds and breaks in flooring.
•If the printer does not have a caster base but is configured with optional trays or output options, then remove
the output options and lift the printer o the trays. Do not try to lift the printer and any options at the same
time.
•Always use the handholds on the printer to lift it.
•Any cart used to move the printer must have a surface able to support the full footprint of the printer.
•Any cart used to move the hardware options must have a surface able to support the dimensions of the
options.
•Keep the printer in an upright position.
•Avoid severe jarring movements.
•Make sure that your fingers are not under the printer when you set it down.
•Make sure that there is adequate clearance around the printer.
Safety information 8
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see www.lexmark.com/multifunctionprinters.
CAUTION—TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately.
Keep all other trays closed until needed.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
CAUTION—PINCH HAZARD: To avoid the risk of a pinch injury, use caution in areas marked with this
label. Pinch injuries may occur around moving parts, such as gears, doors, trays, and covers.
CAUTION—ROTATING FAN BLADES: To avoid the risk of laceration from moving fan blades, turn o the
printer and unplug the power cord from the electrical outlet before accessing areas marked with this
symbol.
CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or
performance of procedures other than those specified in the User’s Guide may result in hazardous
radiation exposure.
CAUTION—POTENTIAL INJURY: The lithium battery in this product is not intended to be replaced.
There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge, disassemble,
or incinerate a lithium battery. Discard used lithium batteries according to the manufacturer's instructions
and local regulations.
The following products are not suitable for use in locations where children are likely to be present:
CS921, CS923, CS927, C9235
CX920, CX921, CX922, CX923, CX924, CX927, XC9225, XC9235, XC9245, XC9255, XC9265
CS720, CS725, CS727, CS728, CX725, CX727, C4150, XC4150, XC4140
CS820, CS827, CX820, CX825, CX827, CX860, C6160, XC6152, XC8155, XC8160
This product is designed, tested, and approved to meet strict global safety standards with the use of specific
manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer
is not responsible for the use of other replacement parts.
Refer service or repairs, other than those described in the user documentation, to a service representative.
This product uses a printing process that heats the print media, and the heat may cause the media to release
emissions. You must understand the section in your operating instructions that discusses the guidelines for
selecting print media to avoid the possibility of harmful emissions.
This product may produce small amounts of ozone during normal operation, and may be equipped with a filter
designed to limit ozone concentrations to levels well below the recommended exposure limits. To avoid high
ozone concentration levels during extensive usage, install this product in a well-ventilated area and replace
the ozone and exhaust filters if instructed to do so in the product maintenance instructions. If there are no
references to filters in the product maintenance instructions, then there are no filters requiring replacement for
this product.
SAVE THESE INSTRUCTIONS.
Safety information 9
Environmental information
ENERGY STAR
Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to
comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped
by Lexmark.
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product in watts (W).
Note: Some modes may not apply to your product.
Model Operating mode
Print Copy Scan Ready Sleep Hibernate O
B2338, MS321 520 W N/A N/A 7 W 1.8 W 0.1 W 0.1 W
B2442, M1242, MS421 570 W N/A N/A 7.5 W 1.6 W 0.1 W 0.1 W
B2546, M1246, MS521 620 W N/A N/A 8 W 2 W 0.1 W 0.1 W
B2650, M3250, MS621, MS622 670 W N/A N/A 9.5 W 2.2 W 0.1 W 0.1 W
B2865, MS823 800 W N/A N/A 20 W 1.6 W 0.2 W 0.2 W
C2240, CS622 570 W N/A N/A 22.5 W 1.5 W 0.2 W 0.2 W
C2325 400 W N/A N/A 20.5 W 1.4 W 0.2 W 0.2 W
C2535, CS521 530 W N/A N/A 22 W 1.3 W 0.2 W 0.2 W
CS421, C2425 400 W N/A N/A 22 W 1.4 W 0.2 W 0.2 W
C4150, CS725, CS728 680 W N/A N/A 80 W 2.4 W 0.3 W 0.2 W
C6160, CS820, CS827 800 W N/A N/A 80 W 2.9 W 0.3 W 0.2 W
C9235, CS921, CS927 675 W N/A N/A 140 W 2.2 W 0.2 W 0 W
CS720, CS727 560 W N/A N/A 80 W 2.4 W 0.2 W 0.2 W
CS923 1050 W N/A N/A 200 W 2.2 W 0.2 W 0 W
CX421, MC2325, MC2425 400 W 425 W 25 W 25 W 2.2 W 0.2 W 0.2 W
Environmental information 10
Model Operating mode
Print Copy Scan Ready Sleep Hibernate O
CX522, MC2535, XC2235 530 W 485 W 28.5 W 26.5 W 1.9 W 0.2 W 0.2 W
CX622, MC2640 580 W 560 W 29.5 W 28.5 W 1.8 W 0.2 W 0.2 W
CX625, XC4240 580 W 540 W 28 W 29.5 W 1.8 W 0.2 W 0.2 W
CX725, CX727, XC4140, XC4150 700 W 460 W 85 W 100 W 2.6 W 0.2 W 0.2 W
CX820, CX827, XC6152 760 W 870 W 115 W 80 W 3.2 W 0.3 W 0.2 W
CX825, XC8155 825 W 650 W 110 W 125 W 3.4 W 0.3 W 0.2 W
CX860, XC8160 870 W 650 W 115 W 125 W 3.3 W 0.3 W 0.2 W
CX920, XC9225 575 W 600 W 230 W 220 W 2.9 W 0.2 W 0 W
CX921, CX927, XC9235 600 W 700 W 230 W 220 W 2.9 W 0.2 W 0 W
CX922, XC9245 1000 W 1075 W 250 W 230 W 2.9 W 0.2 W 0 W
CX923, XC9255 1075 W 1100 W 250 W 230 W 2.9 W 0.2 W 0 W
CX924, XC9265 1250 W 1275 W 250 W 230 W 2.9 W 0.2 W 0 W
M5255, MS821, MS822 670 W N/A N/A 21.5 W 1.4 W 0.2 W 0.2 W
M5270, MS825, MS826 830 W N/A N/A 21 W 1.4 W 0.2 W 0.2 W
MB2338, MX321 520 W 550 W 14.5 W 10.5 W 2.1 W 0.1 W 0.1 W
MB2442, MX421, XM1242 570 W 590 W 17.5 W 11.5 W 2.1 W 0.1 W 0.1 W
MB2546, MX521, MX522, XM1246 620 W 630 W 20 W 14.5 W 2.6 W 0.1 W 0.1 W
MB2650, MX622, XM3250 670 W 680 W 23.5 W 16.5 W 2.5 W 0.1 W 0.1 W
MB2770, MX722, XM5370 850 W 890 W 73 W 32 W 2 W 0.2 W 0.2 W
MS725 720 W N/A N/A 108 W 1.4 W 0.2 W 0.2 W
MX721, XM5365 800 W 830 W 75 W 31 W 1.8 W 0.2 W 0.2 W
MX725 810 W 870 W 158 W 124 W 1.6 W 0.1 W 0.1 W
MX822, XM7355 690 W 750 W 84 W 36.5 W 3.1 W 0.2 W 0.2 W
MX826, XM7370 850 W 900 W 86 W 35 W 3.1 W 0.2 W 0.2 W
The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average. Values are subject to change.
Go to www.lexmark.com for current values.
Sleep Mode
This product is designed with an energy-saving mode called Sleep Mode. The Sleep Mode saves energy by
lowering power consumption during extended periods of inactivity. The Sleep Mode is automatically engaged
after this product is not used for a specified period of time, called the Sleep Mode Timeout.
Factory default Sleep Mode Timeout for this product (in minutes):MS725 and MX725: 5
All other models: 15
Environmental information 11
By using the configuration menus, the Sleep Mode Timeout can be modified between 1 minute and 120 minutes.
Setting the Sleep Mode Timeout to a low value reduces energy consumption, but may increase the response
time of the product. Setting the Sleep Mode Timeout to a high value maintains a fast response, but uses more
energy.
Hibernate Mode
This product is designed with an ultra‑low power operating mode called Hibernate mode. When operating in
Hibernate Mode, all other systems and devices are powered down safely.
The Hibernate mode can be entered in any of the following methods:
•Using the Hibernate Timeout
•Using the Schedule Power modes
Factory default Hibernate Timeout for this product in all countries or regions 3 days
The amount of time the printer waits after a job is printed before it enters Hibernate mode can be modified
between one hour and one month.
O mode
If this product has an o mode which still consumes a small amount of power, then to completely stop product
power consumption, disconnect the power supply cord from the electrical outlet.
Total energy usage
It is sometimes helpful to estimate the total product energy usage. Since power consumption claims are
provided in power units of Watts, the power consumption should be multiplied by the time the product spends
in each mode in order to calculate energy usage. The total product energy usage is the sum of each mode's
energy usage.
Waste from Electrical and Electronic Equipment (WEEE) directive
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the
European Union. We encourage the recycling of our products.
If you have further questions about recycling options, visit the Lexmark Web site at www.lexmark.com for your
local sales oce phone number.
Environmental information 12
India E-Waste notice
This product complies with the India E-Waste (Management and Handling) Rules, 2011, which prohibit use of
lead, mercury, hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers in
concentrations exceeding 0.1％ by weight and 0.01% by weight for cadmium, except for the exemption set in
Schedule II of the Rules.
Product disposal
Do not dispose of the printer or supplies in the same manner as normal household waste. Consult your local
authorities for disposal and recycling options.
Recycling
Lexmark provides collection programs and environmentally progressive approaches to recycling. For more
information, see:
•The Environmental Sustainability section at www.lexmark.com/environment
•The Lexmark recycling program at www.lexmark.com/recycle
•利盟激光打印机回收计划请访问
https://www.lexmark.com/zh_cn/products/supplies-and-accessories/collection-and-recycling-program.htm
•利盟激光耗材回收行动请访问
http://cn.lexmark.com/hc-minisite/lexmark-minisite.htm
Recycling Lexmark products
To return Lexmark products for recycling:
1Go to www.lexmark.com/recycle.
2Select the product you want to recycle.
Note: Printer supplies and hardware not listed in the Lexmark Collection and Recycling Program may be
recycled through your local recycling center.
Environmental information 13
Recycling Lexmark packaging
Lexmark continually strives to minimize packaging. Less packaging helps to ensure that Lexmark printers are
transported in the most ecient and environmentally sensitive manner and that there is less packaging to
dispose of. These eciencies result in fewer greenhouse emissions, energy savings, and natural resource
savings. Lexmark also oers recycling of packaging components in some countries or regions. For more
information, go to www.lexmark.com/recycle, and then choose your country or region. Information on available
packaging recycling programs is included with the information on product recycling.
Lexmark cartons are 100% recyclable where corrugated recycling facilities exist. Facilities may not exist in your
area.
The foam used in Lexmark packaging is recyclable where foam recycling facilities exist. Facilities may not exist
in your area.
When you return a cartridge to Lexmark, you can reuse the box that the cartridge came in. Lexmark recycles
the box.
Returning Lexmark cartridges for reuse or recycling
The Lexmark Cartridge Collection Program allows you to return used cartridges for free to Lexmark for reuse
or recycling. One hundred percent of the empty cartridges returned to Lexmark are either reused or
demanufactured for recycling. The boxes used to return the cartridges are also recycled.
To return Lexmark cartridges for reuse or recycling, do the following:
1Go to www.lexmark.com/recycle.
2Select the product that you want to recycle.
Using genuine Lexmark parts and supplies
Your Lexmark printer is designed to function best with genuine Lexmark parts and supplies. Use of third-party
supplies or parts may aect the performance, reliability, or life of the printer and its imaging components. It can
also aect warranty coverage. Damage caused by the use of third-party parts and supplies is not covered by
the warranty. All life indicators are designed to function with Lexmark parts and supplies, and may deliver
unpredictable results if third-party parts and supplies are used. Imaging component usage beyond the intended
life may damage your Lexmark printer or its associated components.
Environmental information 14
Regulatory information
Regulatory notices for telecommunication terminal equipment
This section contains regulatory information pertaining to products that contain an analog facsimile card.
Product name Lexmark Regulatory
Type/Model Number of the
installed fax card
CX421, CX522, CX622, CX625, MB2338, MB2442, MB2546, MB2650, MB2770,
MC2325, MC2425, MC2535, MC2640, MX321, MX421, MX521, MX522, MX622,
MX721, MX722, MX725, MX822, MX826, XC2235, XC4240, XM1242, XM1246,
XM3250, XM5365, XM5370, XM7355, XM7370
LEX-M14-002
CX725, CX727, CX827, CX820, CX825, CX860, CX920, CX921, CX922, CX923,
CX924, CX927, XC4140, XC4150, XC6152, XC8155, XC8160, XC9225, XC9235,
XC9245, XC9255, XC9265
LEX-M03-002
To determine if your product contains facsimile capability, see the User's Guide or go to
http://support.lexmark.com.
Notice to users of the US telephone network: FCC requirements
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative
Council for Terminal Attachments (ACTA). On the back of this equipment is a label that contains, among other
information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided
to your telephone company.
This equipment uses the RJ-11C Universal Service Order Code (USOC) jack.
A plug and jack used to connect this equipment to the premises’ wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. Use a compliant telephone cord
(RJ-11) that is 26 AWG or larger when connecting this product to the public switched telephone network. See
your setup documentation for more information.
The Ringer Equivalence Number (REN) is used to determine the number of devices that may be connected to
a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number
of devices that may be connected to a line, as determined by the total RENs, contact your local telephone
company. For products approved after July 23, 2001, the REN for this product is part of the product identifier
that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point
(for example, 03 is a REN of 0.3). For earlier products, the REN is shown separately on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. If advance notice is not practical, the telephone company
will notify the customer as soon as possible. You will also be advised of your right to file a complaint with the
FCC.
The telephone company may make changes in its facilities, equipment, operations or procedures that could
aect the operation of this equipment. If this happens, the telephone company will provide advance notice in
order for you to make necessary modifications to maintain uninterrupted service.
Regulatory information 15
If you experience trouble with this equipment, for repair or warranty information, contact Lexmark International,
Inc. at www.lexmark.com or your Lexmark representative. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect the equipment until the problem is resolved.
This equipment contains no user serviceable parts. For repair and warranty information, contact Lexmark
International, Inc. See the previous paragraph for contact information.
Connection to party line service is subject to state taris. Contact the state public utility commission, public
service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of
this equipment does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including fax machines, to send any message unless said message clearly contains in a
margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time
it is sent and an identification of the business or other entity, or other individual sending the message, and the
telephone number of the sending machine or such business, other entity, or individual. (The telephone number
provided may not be a 900 number or any other number for which charges exceed local or long-distance
transmission charges.)
See your user documentation in order to program this information into your fax machine.
Notice to users of the Canadian telephone network
This product meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to
a telephone interface. The termination of an interface may consist of any combination of devices subject only
to the requirement that the sum of the RENs of all the devices not exceed five. The REN is located on the product
label.
This equipment uses CA11A telephone jacks.
Avis réservé aux utilisateurs du réseau téléphonique du Canada
Ce produit est conforme aux spécifications techniques d’Industrie Canada.
Le numéro REN (ringer equivalence number : numéro d’équivalence de sonnerie) indique le nombre maximum
d'appareils pouvant être connectés à l’interface téléphonique. En bout de ligne, le nombre d’appareils qui
peuvent être connectés n’est pas directement limité, mais la somme des REN de ces appareils ne doit pas
dépasser cinq. Le numéro REN est indiqué sur l'étiquette produit.
Cet équipement utilise des prises de téléphone CA11A.
Notice to users of the New Zealand telephone network
The following are special conditions for the Facsimile User Instructions. The grant of a telepermit for any item
of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions
for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any
sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another
item of telepermitted equipment of a dierent make or model, nor does it imply that any product is compatible
with all of Telecom's network services.
Regulatory information 16
This equipment shall not be set up to make automatic calls to the Telecom “111” Emergency Service.
This equipment may not provide for the eective hand-over of a call to another device connected to the same
line.
This equipment should not be used under any circumstances that may constitute a nuisance to other Telecom
customers.
This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for
which it is designed. Telecom will accept no responsibility should diculties arise in such circumstances.
The decadic (or pulse) dialing on this device is unsuitable for use on the Telecom network in New Zealand.
For correct operation, the total of all the Ringer Equivalence Numbers (RENs) of all parallel devices connected
to the same telephone line may not exceed 5. The REN of this device is located on the label.
This device uses an RJ-11C modular connector. Contact your point of purchase if a BT adapter is required. The
Lexmark part number is 80D1873.
Some parameters required for compliance with Telecom's telepermit requirements are dependent on the
equipment associated with this device. The associated equipment shall be set to operate within the following
limits for compliance to Telecom's specifications:
•There shall be no more than 10 call attempts to the same number within any 30 minute period for any single
manual call initiation, and
•The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt
and the beginning of the next call attempt.
•The equipment shall be set to ensure that automatic calls to dierent numbers are spaced such that there
is not less than 5 seconds between the end of one call attempt and the beginning of another.
Japanese telecom notice
The installed optional modem is in compliance with Japanese Telecommunication Law and has been certified
by JATE, with the following Certification Number:
Lexmark International, Inc.
CX421, CX522, CX622, CX625, MB2338, MB2442, MB2546,
MB2650, MB2770, MC2325, MC2425, MC2535, MC2640,
MX321, MX421, MX521, MX522, MX622, MX721, MX722, MX725,
MX822, MX826, XC2235, XC4240, XM1242, XM1246, XM3250,
XM5365, XM5370, XM7355, XM7370
LEX-M14-002 A18-0046001
CX725, CX727, CX827, CX820, CX825, CX860, CX920, CX921,
CX922, CX923, CX924, CX927, XC4140, XC4150, XC6152,
XC8155, XC8160, XC9225, XC9235, XC9245, XC9255, XC9265
LEX-M03-002 A11-0160001JP
Using this product in Switzerland
This product requires a Swiss billing tone filter (Lexmark part number 80D1877) to be installed on any line which
receives metering pulses in Switzerland.
Regulatory information 17
Utilisation de ce produit en Suisse
Cet appareil nécessite l’utilisation d’un filtre de tonalité de facturation suisse (nº de référence Lexmark :
80D1877) devant être installé sur toute ligne recevant des impulsions de comptage en Suisse.
Verwendung dieses Produkts in der Schweiz
Für dieses Produkt muss ein schweizerischer Billing Tone Filter zur Zählzeichenübertragung (Lexmark
Teilenummer 80D1877) für jede Leitung installiert werden, über die in der Schweiz Zeitsteuertakte übertragen
werden.
Uso del prodotto in Svizzera
Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 80D1877) da installare su tutte le linee
che ricevono impulsi remoti in Svizzera.
Regulatory notices for wireless products
This section contains regulatory information that applies only to wireless models.
If in doubt as to whether your model is a wireless model, go to http://support.lexmark.com.
Modular component notice
Wireless models contain the following modular component:
Lexmark Regulatory Type/Model Number LEX-M07-001; FCC ID:IYLLEXM07001; IC:2376A-LEXM07001
To determine which modular components are installed in your particular product, refer to the labeling on your
actual product.
Exposure to radio frequency radiation
The radiated output power of this device is far below the radio frequency exposure limits of the FCC and other
regulatory agencies. A minimum separation of 20 cm (8 inches) must be maintained between the antenna and
any persons for this device to satisfy the RF exposure requirements of the FCC and other regulatory agencies.
Industry Canada (Canada)
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (EIRP) is not more than that necessary for successful communication.
This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Regulatory information 18
Industrie Canada (Canada)
Selon la réglementation d'Industrie Canada, l'émetteur radio ne fonctionne qu'avec une antenne dont le type
et le gain maximal (ou inférieur) ont été approuvés par Industrie Canada. Pour réduire les interférences radio
potentielles auprès d'autres utilisateurs, le type d'antenne et son gain doivent être choisis de telle sorte que la
puissance isotrope rayonnée équivalente (PIRE) ne soit pas supérieure à ce qui est nécessaire pour assurer la
réussite de la communication.
Cet appareil est conforme aux normes RSS exemptes de licence d'Industrie Canada. Son fonctionnement est
soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interférences et (2) il doit accepter
toutes les interférences, y compris les celles qui peuvent entraîner un fonctionnement indésirable.
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directive 2014/53/EU on the
approximation and harmonization of the laws of the Member States relating to radio equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY,
40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön
fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the
Directives is available upon request from the Authorized Representative or may be obtained at
www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
Compliance is indicated by the CE marking:
EU statement of radio transmitter operational frequency bands and maximum RF power
This radio product transmits in the 2.4GHz (2.412–2.472GHz) band in the EU. The maximum transmitter EIRP
power output, including antenna gain, is ≤ 20dBm.
Class A products
Product name Machine type Model
B2865dw, M5255, M5270, MS821n, MS821dn, MS822de,
MS725dvn, MS823n, MS823dn, MS825dn, MS826de
4064 210, 230, 235, 295, 410, 430, 495, 630,
635, 695, 830
C2240, CS622de 5029 636, 696
C6160de, CS820de, CS820dte, CS820dtfe, CS827de 5063 530, 539, 571
C9235, CS921de, CS923de, CS927de 5059 130, 190, 530
CX622ade, CX625ade, CX625adhe, MC2640adwe,
XC4240
7529 636, 686, 836, 838, 898
CX820de, CX820dtfe, CX827de, XC6152de, XC6152dtfe 7563 136, 137, 196, 197
CX825de, CX825dte, CX825dtpe, CX825dtfe, CX860de,
CX860dte, CX860dtpe, CX860dtfe, XC8155de,
XC8155dte, XC8160de, XC8160dte
7564 336, 337, 536, 537, 596, 598
Regulatory information 19
Product name Machine type Model
CX920de, CX921de, CX922de, CX923de, CX923dte,
CX923dxe, CX924de, CX924dte, CX924dxe, CX927de,
XC9225, XC9235, XC9245, XC9255, XC9265
7559 078, 098, 178, 198, 378, 398, 578, 598,
778, 798
M3250, MS622de 4600 835, 895
MB2546ade, MX521de, MX521ade, MX522adhe, XM1246 7017 636, 676, 678, 679
MB2650ade, MX622ade, MX622adhe, XM3250 7018 676, 678, 679
MB2770adwhe, MX721ade, MX721adhe, MX722ade,
MX722adhe, MX725adve, XM5365, XM5370
7464 036, 037, 096, 336, 337, 396, 836
MX822ade, MX822adxe, MX826ade, MX826adxe,
XM7355, XM7370
7465 436, 496, 836, 896
Federal Communications Commission (FCC) compliance information
statement
This product has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
The FCC Class A limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
The manufacturer is not responsible for any radio or television interference caused by using other than
recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user's authority to operate this equipment.
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class A computing
device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach
or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a
violation of FCC regulations.
Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
Telephone: (859) 232–3000
E-mail: regulatory@lexmark.com
Industry Canada compliance statement
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Standard ICES-003.
Regulatory information 20
Avis de conformité aux normes de l’industrie du Canada
Cet appareil numérique de classe A est conforme aux exigences de la norme canadienne relative aux
équipements pouvant causer des interférences NMB-003.
Notice to users of Class A products in Brazil
Este produto não é apropriado para uso em ambientes domésticos, pois poderá causar interferências
eletromagnéticas que obrigam o usuário a tomar medidas necessárias para minimizar estas interferências.
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directives 2014/30/EU, 2014/35/EU,
and 2011/65/EU on the approximation and harmonization of the laws of the Member States relating to
electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage limits, and
on the restrictions of use of certain hazardous substances in electrical and electronic equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY,
40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön
fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the
Directives is available upon request from the Authorized Representative or may be obtained at
www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
This product satisfies the Class A limits of EN 55022 and EN55032 and safety requirements of EN 60950‑1 or
EN 62368-1.
Radio interference notice
Warning
This is a product that complies with the emission requirements of EN55022 and EN55032 Class A limits and
immunity requirements of EN55024. This product is not intended to be used in residential/domestic
environments.
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case
the user may be required to take adequate measures.
Class B products
Product name Machine type Model
B2338dw, B2442dw, B2546dn, B2546dw, B2650dn,
B2650dw, M1242, M1246, MS321dn, MS421dn, MS421dw,
MS521dn, MS621dn, MS621dtn
4600 230, 238, 430, 438, 490, 630, 638, 690,
830, 838
C2325dw, C2425dw, C2535dw, CS421dn, CS521dn 5029 038, 230, 238, 430, 438
C4150, CS720de, CS720dte, CS725de, CS725dte,
CS727de, CS728de
5028 135, 630, 639
CX421adn, CX522ade, MC2325adw, MC2425adw,
MC2535adwe, XC2235
7529 081, 230, 238, 436, 486, 496
Regulatory information 21
Product name Machine type Model
CX725de, CX725dhe, CX725dthe, CX727de, XC4140,
XC4150
7528 196, 576, 578, 598
MB2338adw, MB2442adwe, MX321adn, MX321adw,
MX421ade, XM1242
7017 238, 276, 278, 296, 476, 478, 496
Federal Communications Commission (FCC) compliance information
statement
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
The FCC Class B limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
•Consult your point of purchase or service representative for additional suggestions.
The manufacturer is not responsible for radio or television interference caused by using other than
recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user's authority to operate this equipment.
Note: To assure compliance with FCC regulations on electromagnetic interference for a Class B computing
device, use a properly shielded and grounded cable such as Lexmark part number 1021231 for parallel attach
or 1021294 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a
violation of FCC regulations.
Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
Telephone: (859) 232–3000
E-mail: regulatory@lexmark.com
Industry Canada compliance statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Standard ICES-003.
Regulatory information 22
Avis de conformité aux normes de l’industrie du Canada
Cet appareil numérique de classe B est conforme aux exigences de la norme canadienne relative aux
équipements pouvant causer des interférences NMB-003.
European Community (EC) directives conformity
This product is in conformity with the protection requirements of EC Council directives 2014/30/EU, 2014/35/EU,
2009/125/EC, and 2011/65/EU on the approximation and harmonization of the laws of the Member States
relating to electromagnetic compatibility, safety of electrical equipment designed for use within certain voltage
limits, the ecodesign of energy-related products, and on the restrictions of use of certain hazardous substances
in electrical and electronic equipment.
The manufacturer of this product is: Lexmark International, Inc., 740 West New Circle Road, Lexington, KY,
40550 USA. The authorized representative is: Lexmark International Technology Hungária Kft., 8 Lechner Ödön
fasor, Millennium Tower III, 1095 Budapest HUNGARY. A declaration of conformity to the requirements of the
Directives is available upon request from the Authorized Representative or may be obtained at
www.lexmark.com/en_us/about/regulatory-compliance/european-union-declaration-of-conformity.html.
This product satisfies the Class B limits of EN 55022 and EN55032 and safety requirements of EN 60950‑1 or
EN 62368-1.
Regulatory information 23