Table of Contents
LG 25BL55WY-B.AEU User Manual
Displayed below is the user manual for 25BL55WY-B.AEU by LG which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
* LG LED Monitor applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
25BL55WY
OWNER’S MANUAL
LED LCD MONITOR
(LED Monitor*)
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
2
ENGLISH
LICENSE
Each model has different licenses. Visit www.lg.com for more information on the license.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States and other
countries.
TABLE OF CONTENTS
LICENSE ...................................................... 2
OPEN SOURCE SOFTWARE NOTICE
INFORMATION ............................................ 3
ASSEMBLING AND PREPARING .................. 3
USING THE MONITOR ................................ 10
CUSTOMIZING SETTINGS .......................... 12
TROUBLESHOOTING ................................. 19
PRODUCT SPECIFICATION ......................... 21
3
ENGLISH
OPEN SOURCE SOFTWARE NOTICE INFORMA
TION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in
receipt of this information.
ASSEMBLING AND PREPARING
CAUTION
•Always use genuine LG components to ensure safety and product performance.
•The product warranty will not cover damage or injury caused by the use of unauthorized components.
•It is recommended that use the supplied components.
•If you use generic cables not certified by LG, the screen may not display or there may be image noises.
•Illustrations in this document represent typical procedures, so they may look different from the actual product.
•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing
so may damage the product.)
•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•Do not carry the monitor upside down by just holding the base. This may cause the monitor to fall off the stand
and could result in personal injury.
•When lifting or moving the monitor, do not touch the monitor screen. The force applied to the monitor screen
may cause damage to it.
NOTE
•The components may look different from those illustrated here.
•Without prior notice, all product information and specifications contained in this manual are subject to change
to improve the performance of the product.
•To purchase optional accessories, visit an electronics store or an online shopping site, or contact the retailer
from which you purchased the product.
•The power cord provided may differ depending upon the region.
Supported Drivers and Software
You can download and install the latest version from the enclosed CD or from the LGE website (www.lg.com).
Drivers and Software Installation Priority
Monitor Driver Recommended
OnScreen Control Recommended
Dual Controller Optional
4
ENGLISH
Product and Button Description Moving and Lifting the Monitor
When moving or lifting the monitor, follow these instructions to prevent the monitor from being scratched or
damaged and to ensure safe transportation, regardless of its shape or size.
•Place the monitor in the original box or packing material before attempting to move it.
•Before moving or lifting the monitor, disconnect the power cord and all other cables.
•Hold the bottom and side of the monitor frame firmly. Do not hold the panel itself.
•When holding the monitor, the screen should face away from you to prevent it from being scratched.
•When transporting the monitor, do not expose the monitor to shock or excessive vibration.
•When moving the monitor, keep it upright and never turn the monitor on its side or tilt it sideways.
CAUTION
•Avoid touching the monitor screen as much as possible.
-This may result in damage to the screen or some of the pixels used to create images.
•If you use the monitor panel without the stand base, its joystick button may cause the monitor to become
unstable and fall, resulting in damage to the monitor or human injury. In addition, this may cause the joystick
button to malfunction.
Power Indicator
•Lighting On : Turned on
•Lighting Off : Turned off
(Power Button)
Button
5
ENGLISH
Installing on a Table
•Lift the monitor and place it on the table in an upright position. Place the monitor at least 100mm away from
the wall to ensure sufficient ventilation.
100 mm
100 mm
100 mm
100 mm
CAUTION
•Unplug the power cord before moving or installing the monitor. There is risk of electric shock.
•Make sure to use the power cord that is provided in the product package and connect it to a grounded power
outlet.
•If you need another power cord, please contact your local dealer or the nearest retail store.
Adjusting the Stand Height
1 Place the monitor mounted on the stand base in an upright position.
2 Handle the monitor with both hands for safety.
Max. 130.0 mm
WARNING
•When adjusting the screen height, do not place your hand on the stand body to avoid injury to your fingers.
Adjusting the Angle
1 Place the monitor mounted on the stand base in an upright position.
2 Adjust the angle of the screen.
The angle of the screen can be adjusted forward or backward from -5° to 35° for a comfortable viewing
experience.
WARNING
•To avoid injury to the fingers when adjusting the screen, do not hold the lower part of the monitor’s frame as
illustrated below.
•Be careful not to touch or press the screen area when adjusting the angle of the monitor.
6
ENGLISH
Pivot Feature
The pivot feature allows the monitor to rotate 90° clockwise and -90° counter clockwise.
1 Raise the monitor to the maximum height.
2 Adjust the angle of the monitor in the direction of the arrow as shown in the figure.
3 Rotate the monitor 90° clockwise and -90° counter clockwise as shown in the figure.
4 Complete the installation by rotating the monitor 90° clockwise and -90° counter clockwise as shown
below.
NOTE
•Auto Pivot feature of the display is not supported.
•The screen can be rotated easily using the screenpivot shortcut key provided with your Windows operating
system. Note that some Windows versions and some graphics card drivers may use different settings for the
screen pivot key or may not support the pivot key at all.
•Windows screen pivot shortcut keys
-0°: Ctrl + Alt + Up arrow key (↑)
-90°: Ctrl + Alt + Left arrow key (←)
-180°: Ctrl + Alt + Down arrow key (↓)
-270°: Ctrl + Alt + Right arrow key (→)
WARNING
•To avoid scratching the stand base, make sure that when rotating the monitor using the pivot feature, the
stand does not make contact with the monitor.
Stand Stand
Head Head
7
ENGLISH
Swivel stand
•Image shown may differ from your Monitor set.
1 Swivel 355 degrees and adjust the angle of the Monitor set to suit your view.
Using the cable holder
Arrange the cables using the cable holder as shown in the illustration.
cable holder
or
8
ENGLISH
Using the Kensington Lock
The Kensington security system connector is located at the back of the Monitor set.
For more information on installation and usage, refer to the Kensington lock owner’s manual or visit the website
at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
NOTE
•The Kensington security system is optional. You can obtain optional accessories from most electronics stores.
•The left or right side of the monitor head can be slightly rotated up or down (up to 3°). Adjust the horizontal
level of the monitor head.
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible devices.
NOTE
•The wall mount plate is sold separately.
•For more information on installation, refer to the wall mount plate’s installation guide.
•Be careful not to apply too much force while mounting the wall mount plate as it may cause damage to the
screen.
•Remove the stand before installing the monitor on a wall mount by performing the stand attachment in
reverse.
Installing on the Wall
Install the monitor at least 100mm away from the wall and leave about 100mm of space at each side of the
monitor to ensure sufficient ventilation. Detailed installation instructions can be obtained from your local retail
store. Alternatively, please refer to the manual for how to install and set up a tilting wall mounting bracket.
100 mm
100 mm
100 mm
100 mm
Monitor head
9
ENGLISH
CAUTION
•Unplug the power cord before moving or installing the monitor to avoid electric shock.
•Installing the monitor on the ceiling or on a slanted wall may result in the monitor falling off, which could lead
to injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel.
•Applying excessive force when tightening screws may cause damage to the monitor. Damage caused in this
way will not be covered by the product warranty.
•Use the wall mounting bracket and screws that conform to VESA standards. Damage caused by the use or
misuse of inappropriate components will not be covered by the product warranty.
•When measured from the back of the monitor, the length of each installed screw must be 8 mm or less.
Wall Mount Plate
Back of the Monitor
Standard screw:
M4 x L10
Wall Mount Plate
Back of the Monitor
Max. 8 mm
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
Wall Mount (mm) 100 x 100
Standard screw M4 x L10
Number of screws 4
Wall Mount Plate (Optional) RW120
NOTE
•A non-VESA standard screw may damage the product and cause the monitor to fall. LG Electronics is not liable
for any accidents relating to the use of non-standard screws.
•The wall mount kit includes the installation guide and all necessary parts.
•The wall mounting bracket is optional. You can obtain optional accessories from your local dealer.
•The length of the screw may differ for each wall mounting bracket. If you use screws longer than the standard
length, it may damage the inside of the product.
•For more information, please refer to the user manual for the wall mounting bracket.
10
ENGLISH
USING THE MONITOR
•Illustrations in this manual may differ from the actual product.
CAUTION
•Do not press the screen for a prolonged time. This may cause image distortion.
•Do not display a still image on the screen for a prolonged time. This may cause image retention. Use a PC
screensaver if possible.
•When connecting the power cord to the outlet, use a grounded (3-hole) power strip or a grounded power
outlet.
•The monitor may flicker when turned on in an area where the temperature is low. This is normal.
•Sometimes red, green, or blue spots may appear on the screen. This is normal.
Connecting to a PC
•This monitor supports the *Plug and Play feature.
* Plug and Play: A feature that allows you to add a device to your computer without having to reconfigure
anything or install any manual drivers.
D-SUB connection
Transmits analog video from your PC to the Monitor set.
NOTE
•When using a D-Sub signal input cable connector for Macintosh
•Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA
connector on the supplied cable to a 15 pin 2 row connector.
HDMI Connection
Transmits digital video and audio signals from your PC to the monitor.
CAUTION
•Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•Recommended HDMI cable types
-High-Speed HDMI®/TM cable
-High-Speed HDMI®/TM cable with Ethernet
DisplayPort Connection
Transmits digital video and audio signals from your PC to the monitor.
NOTE
•There may be no video or audio output depending on the DP (DisplayPort) version of the PC.
•Make sure to use the supplied DisplayPort cable of the product. Otherwise, this may cause the device to
malfunction.
•If you are using a Mini DisplayPort output graphics card, use a Mini DP to DP (Mini DisplayPort to DisplayPort)
cable or gender that supports DisplayPort1.2. (Sold separately)
11
ENGLISH
Connecting AV Devices
HDMI Connection
HDMI transmits digital video and audio signals from your AV device to the monitor.
NOTE
•Using a DVI to HDMI / DP (DisplayPort) to HDMI cable may cause compatibility issues.
•Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not
display or a connection error may occur.
•Recommended HDMI cable types
-High-Speed HDMI®/TM cable
-High-Speed HDMI®/TM cable with Ethernet
Connecting Peripherals
USB Device connection
The USB port on the product functions as a USB hub.
NOTE
•It is recommended you install all Windows Updates to keep your Windows up-to-date before connecting to the
product for use.
•Peripheral devices are sold separately.
•A keyboard, mouse, or USB device can be connected to the USB port.
•The charging speed may vary depending on the device.
CAUTION
•Cautions When Using a USB Device
-A USB device with an automatic recognition program installed, or that uses its own driver, may not be
recognized.
-Some USB devices may not be supported or may not work properly.
-It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supply is not
adequate, the USB device may not be recognized properly.)
Headphones Connection
Connect peripherals to the monitor via the headphones port.
NOTE
•Peripheral devices are sold separately.
•Depending on the audio settings of the PC and external device, headphones and speaker functions may be
limited.
•If you use angled earphones, it may cause a problem with connecting another external device to the monitor.
Therefore, it is recommended to use straight earphones.
Angled Straight
(Recommend)
12
ENGLISH
CUSTOMIZING SETTINGS
Activating the Main Menu
1 Press the Menu ( ) button.
2 Use the , , , buttons to adjust the options.
3 Press the Menu ( ) button to exit the OSD menu.
Picture Mode
Button Description
Menu ( )
If the menu is inactive Activates the main menu.
If the menu is active Exits the OSD menu when the button is pressed.
If the menu is inactive Adjusts the volume level of the monitor.
If the menu is active Left directional key.
If the menu is inactive Adjusts the volume level of the monitor.
If the menu is active Right directional key.
INPUT Sets input mode. You can operate the change of input signals.
(Power Button)
Powers on or off.
Power Indicator When the monitor is in operating mode, the power indicator will turn white (on mode).
Monitor buttons
13
ENGLISH
Customizing settings
Quick Settings
Menu > Quick Settings Description
Brightness
Adjusts the color contrast and brightness of the screen.
Contrast
Volume Adjusts the volume level.
Color Temp
Custom The user can adjust it to red, green, or blue by customization.
Warm Sets the screen color to a reddish tone.
Medium Sets the screen color between a red and blue tone.
Cool Sets the screen color to a bluish tone.
Auto Configuration
(D-SUB only)
Do you want to Auto
Configuration?
No Cancel the select.
Yes Operate the Auto configuration for optimal display in D-SUB.
Input
Menu > Input Description
Input List Selects the input mode.
Aspect Ratio
Adjusts the aspect ratio of the screen.
Full Wide Displays the video in wide-screen, regardless of the video signal input.
Original Displays video according to the aspect ratio of the video signal input.
NOTE
•The options may disabled at the recommended resolution (1920 x 1200).
14
ENGLISH
Picture
Menu > Picture Description
Picture Mode
Custom Allows the user to adjust each element. The color mode of the main menu can be adjusted.
Reader Optimizes the screen for viewing documents. You can brighten the screen in the OSD menu.
Photo Optimizes the screen to view photos.
Cinema Optimizes the screen to improve the visual effects of a video.
Color Weakness This mode is for users who cannot distinguish between red and green. It enables users with color weakness to easily distinguish
between the two colors.
Game Optimizes the screen for gameplay.
NOTE
•If the Picture Mode is changed, the screen may flicker or the resolution of your PC screen may be affected.
15
ENGLISH
Menu > Picture Description
Picture Adjust
Brightness Adjusts the brightness of the screen.
Contrast Adjusts the contrast of the screen.
Sharpness Adjusts the sharpness of the screen.
SUPER RESOLUTION+
Off Select this option for everyday viewing. SUPER RESOLUTION+ is turned off in this mode.
High Optimized picture quality is displayed when a user wants crystal clear images. It is effective for high
quality video or game.
Middle The optimized picture quality is displayed when a user wants images between low and high modes
for comfortable viewing. It is effective for UCC or SD video.
Low The optimized picture quality is displayed when a user wants smooth and natural images. It is
effective for slow-moving pictures or still images.
NOTE
•Because this is a function to increase the sharpness of low resolution pictures, it is not recommended to use the function for
normal text or for desktop icons. Doing so may result in unnecessarily high sharpness.
Black Level
Sets the offset level (for HDMI only).
•Offset: as a reference for a video signal, this is the darkest color the monitor can display.
High Keeps the current contrast ratio of the screen.
Low Lowers the black levels and raises the white levels from the current contrast ratio of the screen.
DFC On Adjusts the brightness automatically according to the screen.
Off Disables the DFC feature.
Game Adjust Response Time
Sets a response time for displayed pictures based on the speed of the screen.
For a normal environment, it is recommended that you use Fast.
For a fast-moving picture, it is recommended that you use Faster.
Setting to Faster may cause image sticking.
Faster Sets the response time to faster.
Fast Sets the response time to fast.
Normal Sets the response time to normal.
Off Does not use the response time improvement feature.
16
ENGLISH
Menu > Picture Description
Game Adjust
Black Stabilizer
You can control the black contrast to have better visibility in dark scenes.
Increasing the Black Stabilizer value brightens the low gray level area on the screen. (You can easily distinguish objects on dark
game screens.)
Reducing the Black Stabilizer value darkens the low gray level area and increases the dynamic contrast on the screen.
Cross Hair
Cross Hair provides a mark on the center of the screen for First Person Shooter (FPS) games. Users can select the cross hair that fits
their gaming environment among four different cross hairs.
•When the monitor is off or enters energy saving mode, the Cross Hair feature is automatically turned Off.
Color Adjust
Gamma The higher the gamma value, the darker the image becomes. Likewise, the lower the gamma value, the lighter the image becomes.
If you do not need to adjust the gamma settings, select Off.
Color Temp
Selects the factory default picture color.
Warm: Sets the screen color to a reddish tone.
Medium: Sets the screen color between a red and blue tone.
Cool: Sets the screen color to a bluish tone.
Custom: The user can adjust it to red, green or blue by customization.
Red
You can customize the picture color using Red, Green, and Blue colors.
Green
Blue
Configuration Adjust
(D-SUB only)
Horizontal To move image left and right.
Vertical To move image up and down.
Clock To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change.
Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.
17
ENGLISH
Menu > Picture Description
Resolution
(D-SUB only)
User can set the desired resolution.This option is enabled only when the screen resolution on your computer is set to the following(D-SUB only).
NOTE
•The function is enabled only when the screen resolution on your computer is set to the following, except that the PC output wrong resolution.
1024x768, 1280x768, 1360x768, 1366x768,Off
1280x960, 1600x900,Off
1440x900, 1600x900,Off
Picture Reset Do you want to reset your settings? No Cancel the select.
Yes Returns to the default settings.
NOTE
•This is subsidiary for color weakness user. Therefore if you feel uncomfortable with the screen, please turn off this function.
•This function can’t distinguish some colors in some images.
Sound
Menu > Sound Description
Volume To adjust the Volume of headphone or speaker.
Main Audio To choose the audio source input.
18
ENGLISH
General
Menu > General Description
Language To choose the language in which the control names are displayed.
SMART ENERGY SAVING
High Enables SMART ENERGY SAVING you can save energy with this energy- high efficient.
Low Enables SMART ENERGY SAVING you can save energy with this energy- low efficient.
Off Disables SMART ENERGY SAVING .
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
Power LED
Turns the power indicator on the front side of the monitor on/off.
On The power indicator is automatically turned on.
Off The power indicator is turned off.
Automatic Standby The monitor will automatically switch to standby mode after a certain period.
OSD Lock
Prevents incorrect key input.
On Key input is disabled.
NOTE
•All function except for the OSD Lock mode, brightness, Contrast, Input and Volume are disabled.
Off Key input is enabled.
Information The display information will be shown the Model, Total Power On Time, Serial Number, Resolution.
Reset Do you want to reset your settings? No Cancel the select.
Yes Returns to the default settings.
NOTE
•Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor.If option of SMART ENERGY SAVING is High or Low, monitor luminance become higher or lower depend on source.
19
ENGLISH
TROUBLESHOOTING
Check the following before calling for service.
No image appears
Is the power cord of the display connected? •Check and see if the power cord is connected properly to the power outlet.
Is the power indicator light on? •Press the Power button.
Do you see an "Out of Range" message on the screen? •This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this
manual and configure your display again.
Do you see a "NO SIGNAL" message on the screen? •After the monitor is on "NO SIGNAL", the monitor goes to DPM mode.
•This is displayed when the signal cable between the PC and the monitor is missing or disconnected. Check the cable and reconnect it.
•If monitor is DPM with power LED off condition,user should be press twice DC button for wake up monitor screen.
Can 't you control some functions in OSD?
Can't you select some menu in OSD? •You can unlock the OSD controls at any time by entering the OSD lock menu and changing items to off.
CAUTION
•Check Control Panel ► Display ► Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
•If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
•The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card
manufacturer.
Display image is incorrect
The screen color is mono or abnormal. •Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.
•Make sure the video card is properly inserted in the slot.
•Set the color setting higher than 24 bits (true color) at Control Panel ► Settings.
The screen blinks. •Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display driver? •Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our website: http://
www.lg.com.
•Make sure to check if the video card supports Plug&Play function.
20
ENGLISH
The screen is flickering.
Did you select the recommended resolution? •If the selected resolution is HDMI 1080i 60/50 Hz, the screen may be flickering. Change the resolution to the recommended resolution 1080P.
21
ENGLISH
PRODUCT SPECIFICATION
Color Depth 8-bit color is supported.
Resolution Max Resolution 1920 x 1200 @ 60 Hz
Recommended Resolution 1920 x 1200 @ 60 Hz
Power Sources
Power Rating AC 100 ~ 240V, 50/60Hz 1.2A
Power Consumption
On mode: 17.7 W Typ. (ENERGY STAR® standard)*
25.6 W Typ. (Outgoing condition)**
Sleep Mode ≤ 0.3 W (HDMI / DP input Condition)
Off Mode ≤ 0.3 W
Environmental Conditions
Operating Conditions Temperature 0 °C to 40 °C
Humidity Less than 80 %
Storing Conditions Temperature -20 °C to 60 °C
Humidity Less than 85 %
Dimensions
Monitor Size (Width x Height x Depth)
With Stand 547.7 x 526.3 x 249.5 (mm)
Without Stand 547.7 x 369.3 x 53.0 (mm)
Weight (Without Packaging) With Stand 6.0 kg
Without Stand 4.1 kg
The specifications are subject to change without notice.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
** The On mode power consumption is measured with LGE test standard (Full White pattern , Maximum resolution).
22
ENGLISH
Factory Support Mode (Preset Mode, PC)
D-SUB
Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks
640 x 480 31.469 59.94 -/-
800 x 600 37.879 60.317 +/+
1024 x 768 48.363 60 -/-
1280 x 720 45 60 +/+
1280 x 800 49.702 59.81 -/+
1280 x 1024 63.981 60.023 +/+
1680 x 1050 65.29 59.954 -/+
1920 x 1080 67.5 60 +/+
1920 x 1200 74.04 59.95 +/-
23
ENGLISH
HDMI/DP(DisplayPort)
Preset Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Polarity (H/V) Remarks
640 x 480 31.469 59.94 -/-
800 x 600 37.879 60.317 +/+
1024 x 768 48.363 60 -/-
1280 x 720 45 60 +/+
1280 x 800 49.702 59.81 -/+
1280 x 1024 63.981 60.023 +/+
1680 x 1050 65.29 59.954 -/+
1920 x 1080 67.5 60 +/+
1920 x 1200 74.04 59.95 +/-
HDMI Timing (Video)
Factory support mode
(Preset Mode) Horizontal Frequency(kHz) Vertical Frequency(Hz) HDMI
480P 31.50 60 O
576P 31.25 50 O
720P 37.50 50 O
720P 45.00 60 O
1080P 56.25 50 O
1080P 67.50 60 O
Recommend Mode
24
ENGLISH
Power LED
Mode LED Color
On Mode White (For a few seconds)
Sleep Mode Off
Off Mode Off
This device meets the EMC requirements for home appliances (Class B) and is intended for home usage.
This device can be used in all regions. Read the owner's manual (CD) carefully and keep it at hand. Please note that the
label attached to the product provides information for technical support.
Model
Serial No.
ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental
Protection Agency(EPA).
Refer to ENERGY STAR.gov for more information on the ENERGY STAR program.
As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined
that this product meets the ENERGY STAR guidelines for energy
efficiency.