LG GS5163AEMZ User Manual

Displayed below is the user manual for GS5163AEMZ by LG which is a product in the Side-By-Side Fridge-Freezers category. This manual has pages.

Related Manuals

LG Gallery Stand LG OLED Manual

LG F1443KD Manual

LG GS5163AEJV Manual

LG GS3159PVJV1 Manual

LG CS24AQ Manual

LG 23CAV42K Manual

LG CBV42-B Manual

LG P920 Manual

ENGLISH

OWNER’S MANUAL

SXS

REFRIGERATOR

Please read this manual carefully before operating

your set and retain it for future reference.

www.lg.com

ENGLISH

Important The wires in this mains lead are coloured in accordance with the following code:

(In the UK Only)

GREEN AND YELLOW:EARTH

BLUE:NEUTRAL

BROWN:LIVE

This appliance must be earthed

Green and Yellow (Earth)

Fuse

Brown(Live)

Blue(Neutral)

Cord

grip

As the colours of the wires in the mains lead of this apparatus may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Green and Yellow must be connected to the terminal in the plug

which is marked with the letter E or by the earth symbol( ) or coloured

Green or Green and Yellow.

The wire which is coloured Blue must be connected to the terminal which is marked with the

letter N or coloured Black.

The wire which is coloured Brown must be connected to the terminal which is marked with the

letter L or coloured Red.

If a 13 amp(BS 1363) plug is used, t a 13 amp BS 1362 fuse.

Electrical Connections

ENGLISH

Table of contents

Introduction

Installation

Operation

Suggestion on

food storage

Care and

maintenance

Entry ________________________________________________________ 4

Important safety instructions ______________________________________ 4

Identication of parts ____________________________________________ 6

Where to install ________________________________________________ 8

Door removal __________________________________________________ 8

Door replacement ______________________________________________ 9

Feed water pipe installation (Dispenser model only) ____________________ 10

Door height adjustment __________________________________________ 10

Starting ______________________________________________________ 12

Adjusting the temperature and functions _____________________________ 12

Dispenser use (on some model) ___________________________________ 18

Two stars section (Applicable to some models only) ____________________ 22

Refreshment centre(Applicable to some models only) __________________ 22

No Plumbing Ice & Water (Applicable to some models only) _____________ 23

Shelf (Applicable to some models only) _____________________________ 24

Wine holder (Applicable to some models only) ________________________ 24

Egg box (Depends on model) _____________________________________ 24

Fresh 0 Zone (Applicable to some models only) _______________________ 26

Usage of door rack (option) _______________________________________ 26

Opti Temp Zone Temperature Transition Corner (Applicable to some models only) ___ 27

Temperature Change at Opti Temp Zone (Applicable to some models only) ________ 27

Opti Temp Zone Temperature Transition Corner (Applicable to some models only) ___ 27

Location of foods _______________________________________________ 28

Storing foods __________________________________________________ 29

Suggestion for energy saving _____________________________________ 29

How to dismantle parts __________________________________________ 30

General information _____________________________________________ 32

Cleaning _____________________________________________________ 32

Troubleshooting ______________________________________________ 34

V Fresh (Option not availible for all models) __________________25

ENGLISH

The model and serial numbers are found on the inner case on the back

or one side of the refrigerator compartment of this unit. These numbers

are unique to this unit and are not available to others. You should record

requested information here and retain this guide as a permanent record of

your purchase. Staple your receipt here.

Before it is used, this refrigerator must be properly installed and located in accordance with

the installation instructions in this document. This Refrigerator is intended for Domestic

indoor use only.

Never unplug your refrigerator by pulling on the power cord. Always grip plug rmly and

pull it straight out from the outlet.

When moving your appliance away from the wall, be careful not to roll over the power

cord or to damage it in any way.

After your refrigerator is in operation, do not touch the cold surfaces in the freezer

compartment, particularly when your hands are damp or wet. Skin could adhere to these

extremely cold surfaces.

Unplug the power cord from the power outlet for cleaning or other maintenance. Never

touch the appliance with wet hands as you may receive an electric shock or injure yourself.

Never damage, press, severely bend, pull or twist the power cord as damage to the cord

may cause re or electric shock. Never touch the cord if you are uncertain if the appliance

is correctly earthed.

Never place glass items in the freezer as they may break due to expansion of their contents

on freezing.

Never put your hands into the storage bin of the automatic ice maker as you could be

injured during its operation.

The appliance is not intended for use by young children or inrm persons without

supervision.

Young children should be supervised to ensure that they do not play with the appliance.

Never allow anyone to climb, sit, stand or hang on the refreshment centre door. These

actions may damage the refrigerator and even tip it over, causing severe personal injury.

It is advised that this appliance should be connected through an independent power

socket to prevent it and other appliances from overloading the circuit and causing a power

outage.

The appliance should be positioned so that the supply plug is easily accessible for quick

disconnection should an accident occur.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent

or a similarly qualied person in order to avoid a hazard.

Entry

Important safety instructions

Date of purchase :

Dealer purchased from :

Dealer address :

Dealer phone no. :

Model no. :

Serial no. :

Do not modify or extend the Power Cord length.

It may cause electric shock or re.

Don’t use an

extension cord

Accessibility

of Supply Plug

Supply Cord

Replacement

Warning

Introduction

ENGLISH

DANGER: Risk of child entrapment.

Before you dispose of your old refrigerator please remove doors but leave the shelves

in place so that children cannot climb inside.

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Do not store or use gasoline or other ammable vapour and liquids in the vicinity of

this or any other appliance.

In the event of an electric short circuit, grounding (earthing) reduces the risk of

electric shock by providing an escape wire for the electric current.

In order to prevent possible electric shock this appliance must be earthed. Improper

connection of the earthing plug can cause electric shock. Consult a qualied

electrician or service engineer if the earthing instructions are not completely

understood, or if you have doubts as to whether the appliance is properly earthed.

Keep ventilation openings in the room where the appliance is installed clear of

obstruction.

Do not use mechanical devices or other means to accelerate the defrosting

process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the

appliance, unless they are of the type recommended by the manufacturer.

Disposal procedures. If disposing of this appliance, please consult with a service

agent or a similarly qualied person for more details.

This appliance may contain (Check the rating/comliance label for the refriger-

ant type and amount. Applicable to some models only) a small amount of

isobutane refrigerant (R600a),

natural gas with high environmental compatibility, but it is also combustible.

When transporting and installing the appliance, care should be taken to ensure

that no parts of the refrigerating circuit are damaged. Refrigerant squirting out

of the pipes could ignite or cause an eye injury. If a leak is detected, avoid any

naked ames or potential sources of ignition and air the room in which the

appliance is standing for several minutes.

In order to avoid the creation of a ammable gas air mixture if a leak in the

refrigerating circuit occurs, the size of the room in which the appliance may be

sited depends on the amount of refrigerant used. The room must be 1m2 in size

for every 8g of R600a refrigerant inside the appliance. The amount of refriger-

ant in your particular appliance is shown on the identication plate inside the

appliance. Never start up an appliance showing any signs of damage. If in

doubt, consult your dealer.

Child entrapment

Don’t store

Grounding

(Earthing)

Warning

Introduction

ENGLISH

Dairy Corner

Shelf

Door rack

Lower cover

Door rack

Vegetable drawer

Drawer

Shelf

Ice Maker

Shelf

Shelf (folding or normal)

Dairy Corner

Shelf

Door rack

Wine rack (Plastic or wire)

(Optional)

Door rack

Lower cover

Door rack

Egg box

Door rack

Drawer

Shelf

Shelf or drawer

Humidity Switch

Opti Temp Zone (Optional)

Fresh 0 Zone (Optional)

Refreshment centre (Optional)

Guide pitcher

(Optional)

Shelf (folding or normal)

Snack drawer (Optional)

Freezer

Compartment

Freezer

Compartment

Refrigerator

Compartment

Refrigerator

Compartment

Identication of parts

*Non dispenser model - Type 1

NOTE

• Parts, features, and options vary by model. Your model may not include every option.

*Non dispenser model - Type 2

Lamp /LED Panel (option)

Lamp /LED(option)

Lamp/LED Lamp (option)

Lamp /LED Panel (option)

Lamp/LED Lamp (option)

Introduction

NOTE

• Parts, features, and options vary by model. Your model may not include every option.

* The process of freezing occurs the fastest on the marked shelf.

(Optional)

Vegetable drawer 1 or 2

Introduction

ENGLISH

*Dispenser model - Type 2

Dairy Corner

Lamp/LED Lamp (option)

Wine rack (Plastic or wire) (Optional)

Can Server (Optional)

Door rack

Lower cover

No Plumbing Ice &

Water (Optional)

Door rack

Vegetable drawer 1 or 2

Opti Temp Zone (Optional)

Fresh 0 Zone (Optional)

Drawer

Shelf

Snack Drawer (Optional)

Shelf

Shelf or Drawer

Shelf

Automatic

Icemaker

Extra door

rack(option)

Humidity Switch

Egg Box

Refreshment Centre (Optional)

Guide pitcher

(Optional)

Freezer

Compartment

Refrigerator

Compartment

NOTE

• Parts, features, and options vary by model. Your model may not include every option.

NOTE

• Parts, features, and options vary by model. Your model may not include every option.

*Dispenser model - Type 1

Dairy Corner

Space plus Lamp /LED Panel (option)

Filter (Internal lter model only)

Door rack

Lower cover

Door rack

Vegetable drawer

Drawer

Shelf

Automatic

ice maker

Shelf

Shelf (folding or normal)

Refreshment Centre (optional)

Guide pitcher

Freezer

Compartment

Refrigerator

Compartment

Lamp /LED Panel (option)

Lamp /LED (option)

Lamp/LED Lamp (option)

No Plumbing Ice & Water (Optional)

* The process of freezing occurs the fastest on the marked shelf.

(Optional)

Introduction

ENGLISH

Where to install

Door removal

1. Place your appliance where it is easy to use.

2. Avoid placing the unit near heat sources, di-

rect sunlight or moisture. Do not operate the

appliance outdoors where it can be exposed

directly, or indirectly to sun, wind and rain.

3. To ensure proper air circulation around the

fridge -freezer, please maintain sucient

space on both the sides as well as top and

maintain at least 2 inches (5 cm) from the

rear wall.

4. To avoid vibrations, the appliance must be

levelled.

5. Do not install the appliance in temperatures

of less than 5°C as the performance may be

aected.

Electric Shock Hazard

Disconnect electrical supply to refrigerator before installing. Failure to do so could

result in death or serious injury.

If your front door is too narrow to get

the refrigerator into the house,

remove the refrigerator doors and pass

the appliance through laterally.

Remove the lower cover by loosening

all the screws. Then push in the feed

water tube while depressing the

connector , as shown in the illustration

on the right.

1) Remove the hinge cover by

loosening the screws. Then sepa-

rate all connection wires except

for the earth.

2) Remove the keeper by rotating it

counter clockwise ( ) and then

lifting the upper hinge up ( ).

This appliance contains uid (refrigerant, lubricant) and is made of parts and materi-

als which are reusable and/or recyclable.

All the packaging materials should be sent to the collection centre for recycling. For

details of your local recycling centre, please contact your local council.

Select a good

location

Disposal of the

old appliance

Remove lower

cover and then

feed water

tube

Remove the

freezer

compartment

door

Applicable to No Plumbing

Ice & Water Model only

Lower cover

Feed water tube

NOTE

• If a tube end is deformed or abraded, trim the end with sharp knife until perfectly round.

NOTE

• When removing the upper hinge, be careful that the door does not fall forwards .

①

②

Connection

wires

Earth line

Upper

hinge

Hinge

cover

Keeper Upper hinge

Installation

ENGLISH

NOTE

• If a tube end is deformed or abraded, trim the end with sharp knife until perfectly round.

Door replacement

3) Remove the freezer compartment door

by lifting it upward. The door should be

lifted high enough for the feed water

pipe tube to be completely pulled out.

1) Loosen the hinge cover screws and

remove the cover. Remove

connection wires, if any, except for

the earth line.

2) Remove keeper by rotating it

clockwise ( ) and then remove the

upper hinge by lifting it up ( ).

3) Remove the refrigerator

compartment door by lifting it up.

Pass the refrigerator laterally through

the access door as illustrated to

the right.

Once the fridge is through the access door, remount the fridge doors by following

the door removal instructions in reverse.

Remove the

refrigerator

compartment

door

Pass the

refrigerator

Lower cover

Enough for

water feed pipe tube to

be completly pulled out

NOTE

• If you have removed the refrigerator compartment door to pass the appliance

through an access door, lay the door down, but be careful not to damage the feed

water pipe tube.

Connection

wires

Upper hinge Keeper

Lower hinge

①

②

Installation

ENGLISH

Feed water pipe installation (Dispenser model only)

Door height adjustment

▪Automatic ice maker operation needs water pressure of 147~834kPa

(1.5~8.5kgf/cm2) (The pressure is correct when an instant paper cup (180cc) is

filled in 3 sec.).

▪If water pressure does not reach the rating 147kPa(1.5kgf/cm2) or below, it

is necessary to purchase a separate pressure pump for normal automatic icing

and cool water feed.

▪Keep the total length of the feed water pipe tube within 8m and be careful that

the tube does not bend. If the tube is 8m or longer it may cause water feed prob-

lems owing to the drain water pressure.

▪Install the feed water pipe tube at a place free from heat.

▪Connect to drinking water supply only.

▪Refer to instructions with water lter kit for installation.

Level the door by inserting flat( - type) driver into the groove of the left height

adjusting screw and rotate it clockwise ( ).

Level the door by inserting flat( - type) driver into the groove of the left height

adjusting screw and rotate it clockwise ( ).

Before

installation

If the freezer

compartment

door is lower than

the refrigerator

compartment

door

If the freezer

compartment

door is higher than

the refrigerator

compartment

door

Height dierence

Height

dierence

Height

dierence

Left height

adjustment screw

Right height

adjustment screw

Warning

①

Installation

ENGLISH

Therefrigeratordoorswillclosesmoothlybyadjustingthefrontsideusingthe

height adjustment screw. If the doors do not close correctly, performance may be

thoroughly.

2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their

proper places. They are packed together to prevent possible damage during

shipping.

3. Connect the power supply cord (or plug) to the outlet. Don’t double up with

other appliances on the same outlet.

After levelling

the door height

Installation

Insert the transparent sheet supplied with the product wen the freezerdoor is lower

then the refrigerator door

Separate the door with the lower height, use the (+) type screwdriver to unscrew

the screw at the bottom hinge as shown at Figure ( ), insert the transparent sheet

as shown at Figure ( )

Make adjustments when the refrigerator door is lower then the freezer door while

using the refrigerator.

Use the adjustment tool ( ) to rotate the adjustment hinge pin ( ) in either

clockwise or counterclockwise direction to level the height of the refrigerator

to that of the freezer.

Do not adjust the height axcessively. You can lose the hinge pin.

Height adjustable range: Maximum of 5mm)

Warning

①

②

If the zer eerf

compartment

door is lower than

the ref or taregir

compartment

door

If the zer eerf

compartment

door is higher than

the ref or taregir

compartment

door

(on some model)

ENGLISH

Function display board

Starting

Adjusting the temperature and functions

When your refrigerator is first installed, allow it to stabilize at normal operating

temperatures for 2-3 hours prior to filling it with fresh or frozen foods.

If operation is interrupted, wait 5 minutes before restarting.

*Non dispenser model - Type 1

Refreshment Centre button

(Optional)

Refreshment Centre (Optional)

Operation

NOTE

• Your model may not include every option.

•The control display is touch operated. Excessive moisture on the display panel may

result in its malfunction. Please keep the display panel dry and clean.

Operation

ENGLISH

Display Power Saving Mode

Function display board

*Non dispenser model - Type 2

Refreshment Centre button

(Optional)

Refreshment Centre (Optional)

NOTE

• Your model may not include every option.

• The control display is touch operated. Excessive moisture on the display panel may

result in its malfunction. Please keep the display panel dry and clean.

Operation

ENGLISH

NOTE

• Your model may not include every option.

• The control display is touch operated. Excessive moisture on the display panel may

result in its malfunction. Please keep the display panel dry and clean.

*Dispenser model - Type 1

Water/Ice output

Dispenser push switch

Function display boardOption

Type-1

Type-2

Refreshment Centre button

(Optional)

Refreshment Centre (Optional)

Operation

ENGLISH

Operation

Display Power Saving Mode

*Dispenser model - Type 2

Water/Ice output

Dispenser push switch

Dispenser Lamp (hidden)

Function display boardOption

Type-1

Type-2

Refreshment Centre button

(Optional)

Refreshment Centre (Optional)

NOTE

• Your model may not include every option.

• The control display is touch operated. Excessive moisture on the display panel may

result in its malfunction. Please keep the display panel dry and clean.

ENGLISH

Display Power Saving Mode

Water/Ice output

Dispenser push switch

Dispenser Lamp (hidden)

Function display boardOption

Type-1

Type-2

*Dispenser model - Type 3

Refreshment Centre button

(Optional)

Refreshment Centre (Optional)

NOTE

• Your model may not include every option.

• The control display is touch operated. Excessive moisture on the display panel may

result in its malfunction. Please keep the display panel dry and clean.

Operation

ENGLISH

Display Power Saving Mode

This function is automatically activated after 20 seconds from the power is on.

During Power Saving Mode all LED/LCDs display will remain o until the next time

the door is opened. Then, it will come on whenever a door is opened or a button is

pressed and remain on for 20 seconds after the last door opening or button selection.

You can adjust temperature of the fridge and freezer compartments

Freezer Compartment temperature adjustment

Refrigerator Compartment temperature adjustment

*Whenever pressing button, setting is repeated in the order of (Middle )→(Middle

Strong )→(Strong)→(Weak)→(Middle Weak).

▪ The actual inner temperature varies depending on the food status. The indicated

temperature is a target temperature, not the actual temperature within the refrig-

erator

▪ Until your refrigerator has settled from transit, it will not perform at its optimum.

It takes 2 or 3 days for the fridge to stabilise. During this period, please adjust the

temperature as above.

How to adjust the

temperature in the

freezer compart-

ment Setting

temperature

Setting

temperature

How to adjust the

temperature in

the refrigerator

compartment

Operation

ENGLISH

▪

Choose from crushed ice, water, and cubed ice and depress the dispenser switch

with a glass or other container.

Crushed Ice

Select crushed ice by pressing

the selection button, which will

be highlighted.

Water

Select water by pressing the

selection button, which will be

highlighted.

Cubed Ice

Select cubed ice by pressing

the selection button, which

will be highlighted

Dispenser use

(on some

model)

NB : Please wait for 2-3 seconds before removing the cup from beneath

the dispenser to ensure it has finished dispensing the ice or water.

▪ The icemaker automatically makes 6 cubes of ice at any one time, which equals

approximately 50-60 cubes per day. These quantities, however, may vary according

to climatic conditions. E.g. the duration and amount of times the refrigerator door

is opened.

▪ Icemaking stops when the ice storage bin is full.

▪ If you don’t want to use the automatic icemaker, turn the icemaker switch to OFF.

If you want to use automatic icemaker again, change the switch to ON.

NOTE

•

The sound produced when the ice drops into the ice storage bin is normal, and is not caused

by a defect.

WARNING

•

Do not put your hands into the Ice maker during operation. You may injure yourself.

•

Do not store ice (cubes) for longer than two weeks., they can cause the dispenser

to malfunction as the ice cubes clump together.

Door mounted

automatic

icemaker

(on some model)

Power

Switch

Feeler Arm

Operation

ENGLISH

①②

① ②

The dispensed water will not be icy cold, but just cool or cold. If you want colder

water, dispense ice before dispensing water.

Rotate the rotary gear in 1/4 cycle as shown in the illustration and then push it back.

Precautions when

using the dispen-

ser (on some

model)

NOTE

• Figure ① and ②

depends on model.

To get cold water

If you have difficulty in replacing the ice storage bin

WARNING

• Never insert your hand or any other object into the ice chute as this may damage dispenser

parts or cause injury to the hand.

• If ice is discoloured, stop using the dispenser and call the service centre.

• Do not touch the blade ① ⓐ as it may injure the hand.

• Never insert your hands into the ice maker during operation. It may cause injury ②.

• Do not allow your children to hang off the ice dispenser or the ice storage bin. This could

cause injury.

It is normal that the ice maker will not operate correctly when there is only a small

amount of ice left in the storage bin. Allow approximately one day for the ice maker

to restock.

If the ice forms into a solid lump and interrupts the operation of the automatic

ice maker mechanism, remove the ice storage bin, separate the ice, discard the

inseparable ice, and put the usable ice pieces back into the bin. The intermittent dis-

pensing of ice is normal. However, since ice may get stuck and block the ice chute,

regularly check the ice chute and clear any obstacles.

When the ice dispenser will not operate properly

NOTE

• Figure ① and ②

depends on model.

Operation

ENGLISH

When ice maker

does not operate

smoothly

▪

When ice is lumped together, take the ice lumps out of the ice storage bin, break

them into small pieces, and place them back into the ice storage bin.

▪

When the ice maker produces small or lumped together ice, the amount of water

supplied to the ice maker may need to be adjusted. Contact the service centre.

* If ice is not used frequently, it may lump together.

▪Ice may melt and drop into the freezer compartment. Take the ice storage bin out

and discard all the ice then dry it and place it back. After the machine is powered

again, crushed ice will be automatically selected.

▪

It takes about 12 hours for a newly installed refrigerator to make ice in the freezer

compartment.

Ice is lumped together

Power failure

The unit is newly installed

Express Freezer

Lock

Filter condition

(filter replacement

cycle) display

function (on some

model)

Dispenser

light (on some

model)

▪

OFF

→

OFF is repeated whenever pressing button.

▪

The arrow graphic remains On after flickering 4 times when

selecting Express Freeze

▪

Express Freeze will automatically turn off after a fixed time passes.

▪

Locking or Release is repeated whenever the is pressed for

more than 3 seconds.

▪

If you use the lock button, none of the other buttons will work

until you unlock them.

▪

There is a replacement indicator light for the water filter

cartridge on the dispenser.

▪

The water filter should be replacedevery six months.

▪

The filter light comes on as a reminder to let you know when to

replace filter.

▪

After replacing the filter, press and hold the filter button for

more than 3 seconds to reset the indicator.

This button turn the dispenser light on and off.

▪

The dispenser light function is turned ON or OFF by pressing

Light/Filter / Light button.

Please select this function for fast freezing.

This button locks the other buttons

Operation

▪

For some models, icon is always ON, except

Display Power Saving Mode.

ENGLISH

The other

functions

How ice/cold

water is supplied

Door open warning

Diagnosis (failure detection) function

▪

A warning bleep will sound 3 times every 30 seconds if the main or minibar door is

left open or ajar for more than a minute.

▪ Please contact your local service centre if the warning continues to sound when

the door is closed.

▪

The Diagnosis function automatically detects the problem when a failure is found

whilst using of refrigerator.

▪ If a fault occurs, and none of the refrigerator buttons or functions are working,

do not turn power off but immediately contact your local service centre. Once

powered off it may not be possible for a service engineer to use the Diagnosis

function to detect what caused the original fault.

The first ice and water may include particles or odour from the feed water pipe

or the feed water box. The should also be done if the refrigerator has not been

used for a long time.

Children may push the dispenser switch incorrectly, or damage the dispenser

by breaking associated parts. It may also cause them injury.

If foods are placed at the entrance of the ice chute, ice may not be dispensed.

The ice chute may become covered with ice powder if crushed ice is most

commonly used. Remove the accumulated ice powder.

Such glasses or containers may be broken.

This may damage the automatic ice maker.

Water may be splashed if ice is added after the drink.

Touching the ice outlet may cause a breakage or hand injury.

Ice may be jammed in ice chute causing the refrigerator to fail.

If ice is allowed to pile up near the ice maker, the ice maker may think that it is

already full and it will stop producing ice.

A glass too close to the outlet may hinder ice from coming out.

Water is cooled while stored in the water tank in the refrigerator compartment, and

then sent to the dispenser. Ice is made in the automatic ice maker and is then sent

to the dispenser as either crushed or cubed ice.

NOTE

• It is normal that at first the water is not very cold. If you want colder water, add ice to the glass.

Throw away the first ice (about 20 pieces) and the first water (about 7 glasses)

passing through the appliance when the refrigerator is initially installed.

Keep children away from the dispenser.

Always ensure that food does not block the ice chute.

Never use fine crystal glasses or crockery to collect ice.

Never store beverage cans or other foods in the ice storage bin for

rapid cooling.

Put ice into a glass before filling with water or other beverages.

Never touch the ice outlet either with hands or any implement.

If discolored ice is dispensed, stop using the appliance and contact your serv-

ice centre immediately.

Never remove the ice maker cover. It might be necessary from time to time to

level the ice so the storage bin can fill to capacity.

Keep the glass at a proper distance from ice outlet.

Never use narrow or deep glassware when using the icemaker

as ice can back up into the ice chute and cause a malfunction.

Operation

ENGLISH

Freezer basket

(two stars section)

How to use

Use the minibar

door as a stand

Never remove

the inner minibar

door cover

Never place

heavy items on

the minibar door

or allow children

to hang or sit

on it.

▪

Two stars means the temperature in the section is -12°C~ -18°C.

▪

Freezer foods for short-term storage.

Open the minibar door.

▪

You can access the minibar without

opening the refrigerator door, thus saving

electricity.

▪

Inner lamp is lit in the refrigerator

compartment when the minibar door

opens, making it easy to identify the

contents.

▪

Never use the minibar door as a chopping

board and take care not to damage it with

sharp tools.

▪ Never rest or press on the open minibar

door.

▪

The minibar can not function correctly

without the cover.

Only applies to models with inner minibar

cover.

▪

Not only may the minibar door be

damaged, but children may be hurt.

Two stars section (Applicable to some models only)

Refreshment centre(Applicable to some models only)

Operation

ENGLISH

The other

functions

When using the

water bottle

You can use the water in the water tank or general water bottles to use the Auto Ice

Maker function and Water Dispenser function without having to connect the water

pipe to the refrigerator.

Turn the secure switch into “OPEN” position as

shown in ①.Next to loosen the water tank hold

and pull the cap of the water tank ② to loosen

the water tank.

To fill the water tank

Lift up the clamps on both sides to open the

water tank cover, and then fill the tank. Pour

water up to the marked line (3ℓ or 2.1ℓ <depends

of type>). When the tank is full, close the tank

cover and lock the clamps on both sides.

Adjust the top of the water tank cap and align

the pump tube with the centre, pushing the tank

in firmly, as shown in ③. Turn the security switch

to the“CLOSE” position ④.

When using the water bottle

You can connect the cap to the general water

bottle to use the water bottle, instead of the

water tank provided. Turn the cap of the water

tank in Open direction to open it. Open the

water bottle and connect the cap. Only the water

bottle of 1.5 ~2.0 (35cm) can be used and there

are some types that are not compatible.

NOTE

• When assembling or disassembling the water tank, be careful not to apply

excessive force as it can damage the water tank.

• If there is no water in the water tank, you will not be able to use the Auto Ice

Maker function and Water Dispenser function.

• Using other liquid besides water can cause problems to the pump.

• When the water in the water tank is low, the size of the ice cubes may become smaller.

• It’s a good idea to clean out the water tank initially before filling it with water

and placing it into position.

• The method of using the Dispenser and Ice Maker is the same as other common

Dispenser models.

• When using the water bottle instead of the water tank, do not throw away the

water tank.

• Because the water tank can get heavy, don’t let children use or hold the water

tank, especially with one hand.

• You may hear the water pump operating 9~10 times per day.

No Plumbing Ice & Water (Applicable to some models only)

Operation

ENGLISH

Folding Shelf

Wine holder

adjustment

(Type 1)

(Type 2)

You can store taller items such as a gallon container or bottles by simply pushing in

front half of shelf underneath back half of shelf. Pull toward you to return to a full shelf.

Bottles can be stored laterally with this

wine corner.

This can be attached to any shelf.

Pull the wine holder downward as

②

after inserting it into the side

anchoring part of the shelf as in

①

catching it upward as in

①

Pull the wine holder inward as in

③

after holding it upward as in

④

catching it.

Bottles can be stored laterally with this

wine rack.

In case of inserting the wine holder :

In case of separating the wine holder :

Egg box (Depends on model)

Wine holder (Applicable to some models only)

Shelf (Applicable to some models only)

NOTE

• Never use the egg box as an ice storage bin. It can be broken.

• Never store the egg box in the freezer compartment or fresh compartment.

Operation

ENGLISH

The humidity can be controlled by adjusting the humidity control switch to the

left/right when storing vegetables or fruits.

Humidity control in the vegetable compartment

(Applicable to some models only)

High humidity

Low humidity

Deodorizing

system

Vegetable

compartment

Opti Temp Zone

(Optional) /

Fresh 0 Zone

(Optional)

How to use the

deodorizing

system

This system efficiently absorbs strong

odours by using an optical catalyst. This

system does not have any affect on stored

food.

▪ The deodorizer is located behind the vegetable compartment. It can be removed

for cleaning with soapy warm water from time to time.

▪ Please use closed containers to store pungent food. Odours are easily absorbed by

other food in the compartment.

Deodorizer (Applicable to some models only)

To open the drawer, grasp the release handle

and press outwards and pull open the drawer.

To close the drawer, push the drawer inwards until

you hear a click. Then apply V Fresh button.

①

②

Regular application of the V Fresh button keeps vegetables and fruits fresher.

A portion of air is pumped out temporarily from the compartment which creates in the

partially sealed compartment drawer a nite vacuum.

▪ Pressing the button on the drawer will evacuate air

out of the compartment, thus temporarily reducing

the internal air pressure.

V Fresh (Option not available for all models)

Instructions for use

Operation

ENGLISH

Fresh 0 Zone (Applicable to some models only)

Using door rack (option)

• “Fresh 0 Zone“ temperature can be

changed by setting listed like below:

• When the refrigerator room is set on 6°C,

FRESH 0 ZONE has 4 ±2°C.

• When the refrigerator room is set on 3°C,

FRESH 0 ZONE has 0 ±2°C.

• When the refrigerator room is set on 0°C,

FRESH 0 ZONE has -3 ±2°C.

If the ice maker is not used more room is available for foodstuffs.

• Disassemble and empty the automatic ice maker.

• Turn off the ice maker (

①

)

• Assemble the door rack with care.

• Insert

②

into bottom hole (

③

)

• Store food products in a way preventing them from falling out while opening

the door.

NOTE

• Store only meat, fish.

• If store vegetables and fruits, they can be frozen.

Operation

Freezer Compartment

(Option not available for all models)

If a large quantity of food is to be placed in the

freezer compartment:

The middle drawer of freezer compartment shall

be taken out of the appliance and food shall be

stacked directly on the wire shelf.

Freezer compartment provides wire shelf on default to

maximize food storage capacity. And also the drawer

is provided to convenient usage for watery meat or

half-liquid state food.

Operation

ENGLISH

Method to use

When removing

Opti Temp Zone

When installing

Opti Temp Zone

By pressing the button, store vegetables,

fruits or other types of food such as

defrosting meat, raw fish, etc.

▪ First, remove the vegetable bin.

▪ After lifting the Opti Temp Zone case slightly ① ,

reach inside and pull it outward ②.

▪ Fit the Opti Temp Zone case on to the ledge ① and

gently slide it in ②.

▪ When forced, the connecting parts can be damaged.

You can select optimum temperature

range depending on types of foods

stored.

Opti Temp Zone Temperature Transition Corner

(Applicable to some models only)

Opti Temp Zone Temperature Transition Corner

(Applicable to some models only)

Temperature Change at Opti Temp Zone

(Applicable to some models only)

- 3-step of temperature selection

including -3°C, -1°C and 4°C is

available. Vegetables/fruits and

cold storage foods requiring

humidity maintenance and meats/

fishes can be more freshly stored.

▪ When using the Opti Temp Zone as storage room of meats, storing vegetables

or fruits, , undesirable freezing may occur to some items if the incorrect setting

is selected. It is recommended that all meat and produce be stored in plastic or

paper bags.

▪ The Opti Temp Zone is for temporary storage only(1~2 days). Longer storage of

Meat and Fish should be stored in the freezer to avoid it from spoiling.

▪ If opening the R-room, the lamp turns on and then turns off again on closing.

▪ (Vegetable/Fruit)→(Cold storage while maintaining humidity)→(Meat) is

sequentially repeated whenever pressing the “SELECT” button.

Operation

ENGLISH

Wine holder

Snack drawer

Freezer

compartment

shelf

Freezer

compartment

door rack

Freezer

compartment

drawer

Milk product corner

Egg box

Refreshment center

Refrigerator

compartment shelf

Refrigerator

compartment

door rack

Vegetable drawer

Vegetable drawer/

meat drawer

conversion corner

(Refer to identification of parts)

Store wine.

Store small foods such as bread, snacks, etc..

Store various frozen foods such as meat, sh,ice cream,

frozen snacks, etc..

▪ Store small packed frozen food.

▪ Temperature is likely to increase as door opens. So, do

not store long-term food such ice cream, etc..

▪ Store meat, fish, chicken, etc.. after wrapping them with

tin foil.

▪ Store dry.

Store milk products such as butter, cheese,etc..

Place this egg box in the proper location.

Store foods of frequent use such as beverage,etc..

Store side dishes or other foods at a proper distance.

Store small packed food or beverages such as milk, juice,

beer, etc..

Store vegetables or fruits.

Store vegetable, fruits, meat to thaw, raw sh, etc.. setting

the conversion switch as necessary.

Be sure to check the conversion switch setting before

storing foods.

Location of foods

Suggestion on food storage

ENGLISH

Storing foods

Suggestion for energy saving

▪ Store fresh food in the refrigerator compartment. How food is frozen and thawed

is an important factor in maintaining its freshness and flavour.

▪ Do not store food which goes bad easily at low temperatures, such as bananas,

and melons.

▪ Allow hot food to cool prior to storing. Placing hot food in a refrigerator could

spoil other food, and lead to higher energy consumption.

▪ When storing food, cover it with vinyl wrap or store in a container with a lid.

This prevents moisture from evaporating, and helps food to keep its taste and

nutrients.

▪ Do not block air vents with food. Smooth circulation of chilled air keeps

refrigerator temperatures even.

▪ Do not open the door frequently. Opening the door lets warm air enter the

refrigerator and causes temperatures to rise.

▪ Never keep too much food in the door rack as it may push against the inner racks

so that the door cannot fully close.

▪ Do not store bottles in the freezer compartment - they may break when frozen.

▪ Do not refreeze food that has been thawed. This causes loss of taste and nutrients.

▪ When storing frozen food like ice cream for a long period, place it on the freezer

shelf, not in the door rack.

▪ Do not touch cold foods or containers - especially metallic containers - with wet

hands or place glass products in the freezer compartment.

- You may get chill blains, and glass containers may break when frozen, causing

personal injury.

▪ Avoid placing sauces on top refrigerator shelves, which could freeze on direct

contact with chilled air.

▪ Always clean food prior to refrigeration. Vegetables and fruits should be washed

and wiped, and packed food should be wiped, to prevent adjacent food from

spoiling.

▪ When storing eggs in their storage rack or box, ensure that they are fresh, and

always store them in an upright position, which keeps them fresh longer.

Freezer

Compartment

Refrigerator

Compartment

NOTE

• If you keeping the refrigerator in a hot and humid place, frequently open the

door or store a lot of vegetables, dew may form. This has no effect on operation

or performance. Remove the dew with an absorbent dry cloth.

• Please do not keep the door open for a long time, close door in the shortest

time.

• Storing too much food is not recommended. Sufficient space should be left

to ensure proper air circulation.

• Do not set the temperature of fridge freezer lower than needed. Do not put

food near the temperature sensors. Keep the distance of at least 5mm from

the sensors.

• Allow hot food to cool prior to storing. Placing hot food in the fridge freezer

could affect other food, and lead to higher energy consumption.

• Do not block air vents. Smooth circulation of cold air maintains the

appropriate temperature.

• Do not open the door frequently. Opening the door lets warm air enter the

fridge-freezer, and causes the temperature to rise.

• The configuration of shelves, baskets and drawers supplied by the

manufacturer is the most efficient in terms of energy saving.

Suggestion on food storage

ENGLISH

How to dismantle parts

Separate the lamp by pulling it out ③ while slightly

pressing ① and rotating ② the lamp cover. Turn the bulb

counterclockwise.

OPTION 1 Use a 40-watt bulb(max.) which can be

purchased at a service centre.

OPTION 2 - LED Use only 12VDC LED bulb which can be

purchased at a service centre.

OPTION 1 To remove the lamp cover, press the protrusion under the lamp

cover to the front and then pull the lamp cover out.

Turn the bulb counterclockwise. Max. 40 W bulb for refrigerator is used and

can be purchased at a service centre.

OPTION 2 - LED To replace refrigerator light panel please contact to your

service centre.

Refrigerator

compartment

lamp

Freezer

compartment

lamp

Freezer

compartment

shelf

Door rack and

support

Ice storage bin

(Applicable to

some models only)

After dispenser is

used

(Applicable to

some models only)

NOTE

• Dismantle by reversing the assembly instructions. Be sure to unplug the power

plug before dismantling and assembly. Never apply severe force to dismantle

parts. Parts may be damaged.

NOTE

• Not all bulbs will fit your refrigerator.

Be sure to replace the bulb will one of the same size, shape and wattage.

• The dispenser lights are LEDs that can not be changed.

To remove a shelf, push the shelf to the left ②,lift the

left part of the shelf a bit ①, lift the right part up ③, and

take it out.

Lift the door rack holding both sides ① and pull it out ②.

Hold the ice storage bin as shown in the right figure

and pull it out ② while slightly lifting it ① .

▪ Do not dismantle the ice storage bin unless it is

necessary.

▪ Use both hands to remove the ice bin to avoid

dropping it.

The water collector has no self-draining function. It

should be cleaned regularly.

First take out the water collector cover.

Press the cover where PUSH marked ① to lift the

water collector cover up.

Take out the water collector cover as illustrated ②.

Care and maintenance

ENGLISH

▪ Separate the bin ① to upward.

▪ Separate the upper rack of the minibar and then

pull out the minibar cover ②.

▪ The minibar can be removed by pulling it

upwards.

▪ To remove the vegetable compartment cover, pull

out the vegetable compartment a bit to the front

① , lift the front part of the vegetable compartment

cover as shown by ②, and take it out.

Turn off the Ice maker switch (off) after remove the SPACE PLUS, if you are

on a long term vacation or don’t use ice.

If you want to use for ice, turn on the Ice maker switch(on).

Vegetable

compartment

cover

Ice maker

(Applicable to some

models only)

Ice storage bin

(Applicable to some

models only)

Space Plus

(Applicable to some

models only)

Refreshment centre

(Applicable to some

models only)

NOTE

• Be sure to remove parts from the refrigerator door when removing the vegetable

compartment,snack drawer and minibar cover.

Lift the space plus ① and pull it out to ②

direction.

Hold the ice storage bin as shown in

the right figure and pull it out ② while

slightly lifting it ①.

▪ It is recommended that the ice storage

bin is not dismantled unless absolutely

necessary.

▪ Be sure to use both hands when

removing the ice storage bin, so as not

to drop it on the floor.

▪ If the ice storage bin does not fit well,

slightly rotate the rotating device.

②

①

To remove the vegetable compartment

drawer, pull out the drawer halfway

and then lift the roof of the

outer compartment while pulling

out the drawer.

V Fresh

(Option not available

for all models)

Care and maintenance

ENGLISH

Your new refrigerator may make sounds that your old one didn’t make. Because the sounds

are new to you, you might be concerned about them. Most of the new sounds are normal.

Hard surfaces, like the floor, walls and cabinets, can make the sounds seem louder than they

describes the kinds of actually are. The following sounds and what may be making them:

Understanding

sounds you

may hear

•The defrost timer will click when the automatic defrost cycle begins and ends. The

thermostat control (or refrigerator control, depending on the model) will also click when

cycling on and off.

•Rattling noises may come from the flow of refrigerant,the water line, or items stored on top

of the refrigerator.

•Your refrigerator is designed to run more efficiently to keep your food items at the desired

temperature. The high efficiency compressor may cause your new refrigerator to run longer

than your old one, and you may hear a pulsating or high-pitched sound.

•You may hear the evaporator fan motor circulating the air through the refrigerator and

freezer compartments.

•As each cycle ends, you may hear a gurgling sound due the refrigerant flowing in your

refrigerator.

Contraction cause a popping noise to and expansion of the inside walls may a popping

noise.

•Water dripping on the defrost heater during a defrost cycle may cause a sizzling sound.

•You may hear air being forced over the condenser by the condenser fan.

•You may hear water running into the drain pan during the defrost cycle.

General information

Cleaning

During average length vacations, you will probably find it best to leave the refrigerator in

operation. Place freezable items in freezer for longer life. When you plan not to operate,

remove all food, disconnect the power cord, clean the interior thoroughly, and leave each

door OPEN to prevent odour formation.

Most power failures that are corrected in an hour or two will not affect your refrigerator

temperatures. However, you should minimize the number of door openings while the

power is off.

Remove or securely fasten down all loose items inside the refrigerator. To avoid damaging

the height adjusting screws, turn them all the way into the base.

The outside wall of the refrigerator cabinet may sometimes get warm, especially just after

installation. Don’t be alarmed. This is due to the anti-condensation pipe, which pumps

through the refrigerator to prevent “sweating” on the outer cabinet wall.

It is important that your refrigerator be kept clean to prevent undesirable odours. Spilled

food should be wiped up immediately, since it may acidify and stain plastic surfaces if

allowed to settle.

Use a luke warm solution of mild soap or detergent to clean the durable finish of your

refrigerator. Wipe with a clean damp cloth and then dry.

Regular cleaning is recommended. Wash all compartments with a baking soda solution

or a mild detergent and warm water. Rinse and dry.

Please verify that the power cord is not damaged, power plug is not overheated, or

power plug is well inserted into the wall outlet socket.

Always remove power cord from the wall outlet prior to cleaning near to electrical

equipment (lamps, switches, controls, etc.). Wipe up excess moisture with a sponge

or cloth to prevent water or liquid from getting into any electrical part and causing

an electric shock. Never use metallic scouring pads, brushes, coarse abrasive cleaners,

strong alkaline solutions, ammable or toxic cleaning liquids on any surface. Do not

touch frozen surfaces with wet or damp hands, because damp object will stick to

extremely cold surfaces.

Vacation time

Exterior

Power failure

Interior

If you move

After cleaning

Anti condensation

pipe

Warning

Care and maintenance

ENGLISH

Care and maintenance

Cleaning the water dispenser and the water tank.

(Applicable to some models only)

Frequency of cleaning: every 2 months or when is needed.

Procedure:

1. Before cleaning pour out water from the water tank.

2. Mix 0.5l of water with proper amount of dispenser cleaning product (and then pour it into

the water tank). Do not use any harsh chemicals.

3. Dispense 1 cup of solution and leave the rest of it inside dispenser system for time shown

on the cleaning product label. Do not drink water from the dispenser while all the

cleaning process!

4. Dispense rest of the solution until the tank is empty.

5. Clean the water tank with a soft sponge and rinse it under tap water.

6. Fill the water tank with fresh water. Dispense 3 cups of water, one after another with

20s breaks. Fill the water tank with boiled water and dispense one cup.

7. Check taste of water. If the taste is tainted repeat action no.6 until water has

non-suspicious taste.

We recommend NOT to leave water inside the water tank for more than 2 days.

Occurrence Possible cause Solution

Type of water supply or water dispenser

needs cleaning.

Water not dispensed for extended period.

Clean the water tank. Always boil water

before placing it into the water tank.

Pour out old water. Clean the water tank.

Fill the water tank with new water.

Sediment seen

inside the water tank

Bad smell and

taste of water

General information

Before calling for service, review this list. It may save you both time and expense.

This list includes common occurrences that are not the result of defective

workmanship or materials in this appliance.

Occurrence Possible cause Solution

Running of refrigerator Refrigerator control is off. Set refrigerator control. See setting the

controls.

Refrigerator

compressor does not

run.

Refrigerator is in defrost cycle. This is normal for a fully automatic

defrosting refrigerator. The defrost cycle

occurs periodically.

Plug at wall outlet is disconnected. Make sure plug is tightly pushed into

outlet.

Power outage. Check house lights. Call your electricity supplier.

Refrigerator is larger than the previous

one you owned.

This is normal. Larger, more ecient

units run longer in these conditions.

Room or outside weather is hot. It is normal for the refrigerator to work

harder under these conditions.

Refrigerator

compressor runs too

often or too long.

Refrigerator has recently been

disconnected for a period of time.

It takes some hours for the refrigerator

to cool down completely.

Large amounts of warm or hot food may

have been stored recently.

Warm food will cause the refrigerator

to run longer until the desired

temperature is reached.

Doors are opened too frequently or too

long.

Warm air entering the refrigerator

causes it to run longer. Open the door

less often.

Refrigerator or freezer door may be

slightly open.

Make sure the refrigerator is level. It is

normal for the refrigerator to have a

slight lean backwards. Keep food and

containers from blocking door. See

problem section OPENING/CLOSING

of doors.

Refrigerator control is set too cold. Set the refrigerator control to a

warmer setting until the refrigerator

temperature is satisfactory.

Refrigerator or freezer gasket is dirty,

worn, cracked, or poorly tted.

Clean or change gasket. Leaks in the

door seal will cause refrigerator to run

longer in order to maintain desired

temperatures.

Thermostat is keeping the refrigerator at

a constant temperature.

This is normal. Refrigerator goes on and

o to keep the temperature constant.

Care and maintenance

ENGLISH

Occurrence Possible cause Solution

Refrigerator compressor

does not run

Thermostat is keeping the refrigerator at a

constant temperature.

Set refrigerator control. See setting the

controls.

Temperatures are too cold

Temperature in the

freezer is too cold

but refrigerator

temperature is

satisfactory.

Freezer control is set too cold Set freezer control to a warmer setting

until the freezer temperature is

satisfactory.

Temperature in the

refrigerator is too

cold but freezer

temperature is

satisfactory.

Refrigerator control is set too cold Set refrigerator control to a warmer

setting until the refrigerator

temperature is satisfactory.

Food stored in

drawers freezes.

Refrigerator control is set too cold See above solution.

Meat stored in fresh

meat drawer freezes.

Meat should be stored at a temperature just

below the freezing point of water (32F, 0C)

for maximum fresh storage time.

It is normal for ice crystals to form

due to the moisture content of meat.

Temperatures are too

warm

Temperatures in the

refrigerator or freezer are

too warm.

Freezer control is set too warm. Set the refrigerator control to a colder

setting until the freezer or refrigerator

temperature is satisfactory.

Refrigerator control is set too warm.

Refrigerator control has some eect on

freezer temperature.

Set the refrigerator control to a colder

setting until the freezer or refrigerator

temperature is satisfactory.

Doors are opened too frequently or too

long.

Warm air enters the refrigerator/

freezer whenever the door is opened.

Open the door less often.

Door is slightly open. Close the door completely

Large amounts of warm or hot food may

have been stored recently.

Wait until the refrigerator or freezer

has a chance to reach its selected

temperature.

Refrigerator has recently been disconnected

for a period of time.

A refrigerator requires some hours to

cool down completely. Do not place

food items inside the refrigerator

until it has initially reached it’s set

temperature, or has cooled down

considerably.

Temperature in the

refrigerator is too

warm but the freezer

temperature is

satisfactory.

Refrigerator control is set too warm. Set the refrigerator control to a colder

setting.

e and maintenance

Care and maintenance

ENGLISH

Occurrence Possible cause Solution

Sound and noise

Louder sound levels when

refrigerator is on.

Today’s refrigerators have increased

storage capacity and maintain more even

temperatures.

It is normal for sound levels to be

higher.

Louder sound levels

when compressor

comes on.

Refrigerator operates at higher pressures

during the start of the ON cycle.

This is normal. The sound will level o˛

as the refrigerator continues to run.

Vibrating or rattling

noise.

Floor is uneven or weak. Refrigerator rocks on

the floor when it is moved slightly.

Be sure floor is level and solid and can

adequately support refrigerator.

Refrigerator control is set too cold See above solution.

Items placed on the top of the refrigerator

are vibrating.

Remove items.

Dishes are vibrating on the shelves in the

refrigerator.

It is normal for dishes to vibrate

slightly. Move dishes slightly. Make

sure refrigerator is level and rmly

set on oor. It is normal for the

refrigerator to have a slight lean

backwards.

Refrigerator is touching wall or cabinets. Move refrigerator so that it does not

touch the wall or refrigerator.

Water/Moisture/Ice

inside refrigerator

Moisture collects on

the inside walls of the

refrigerator.

The weather is hot and humid which

increases the rate of frost buildup and

internal sweating.

This is normal.

Door is slightly open. See problem section opening/closing

of doors.

Door is opened too often or too long. Open the door less often.

Water/Moisture/Ice

outside refrigerator

Moisture forms

on the outside of

the refrigerator or

between doors.

Weather is humid. This is normal in humid weather.

When humidity is lower, the moisture

should disappear.

Door is slightly open,causing cold air from

the inside the refrigerator to meet warm air

from the outside.

This time, close the door completely.

Care and maintenance

ENGLISH

Care and maintenance

Occurrence Possible cause Solution

Odours in refrigerator

Interior needs to be cleaned. Clean interior with sponge,warm

water and baking soda.

Food with strong odour is in the refrigerator. Cover food completely.

Some containers and wrapping materials

produce odours.

Use a dierent container or brand of

wrapping materials.

Opening/Closing of

doors/Drawers

Door(s) will not close. Food package is keeping door open. Move packages that keep door from

closing.

Door was closed too hard, causing other

door to open slightly

Close both doors gently.

Refrigerator is not level. It rocks on the oor

when it is moved slightly.

Adjust the height adjusting screw.

Floor is uneven or weak. Refrigerator rocks

on the oor when it is moved slightly.

Be sure oor is level and can

adequately support refrigerator.

Contact carpenter to correct sagging

or sloping oor. It is normal for the

refrigerator to have a slight lean

backwards.

Refrigerator is touching wall or cabinets. Move refrigerator.

Drawers are dicult

to move.

Food is touching shelf on top of the drawer. Keep less food in drawer.

Track that drawer slides on is dirty. Clean drawer and track.

Dispenser

Dispenser will not

dispense ice

Ice storage bin is empty. When the rst supply of ice is

dropped into the bin, the dispenser

should operate.

Freezer temperature is set too warm. Turn the freezer control to a higher

setting so that ice cubes will be

made. When the rst supply of ice is

made,the dispenser should operate.

Household water line valve is not open. Open household water line valve

and allow sucient time for ice to be

made. When ice is made, dispenser

should operate.

Refrigerator or freezer door is not closed. Be sure both doors are closed.

Care and maintenance

ENGLISH

Occurrence Possible cause Solution

Dispenser will not

dispense ice.

Ice has melted and frozen around auger due

to infrequent use, temperature fluctuations

and/or power outrages.

Remove ice storage bin, and thaw and

the contents. Clean bin, wipe dry and

replace in proper position. When new

ice is made, dispenser should operate.

Ice dispenser is

jammed.

Ice cubes are jammed between the icemaker

arm and back of the bin.

Remove the ice cubes that are jamming

the dispenser.

Ice cubes are frozen together. Only the ice cubes made by the

ice maker should be used with the

dispenser.

Ice cubes that have been purchased or

made in some other way have been used in

the dispenser.

Use a dierent container or brand of

wrapping materials.

Dispenser will not

dispense water.

Household water line valve is not open. See

problem “Ice maker is not making any ice.”

Open household water line valve.

Refrigerator or freezer door is not closed. Be sure both doors are closed.

Water has an odd taste

and/or odour.

Water has been in the tank for too long. Dispense and discard 7 glasses of

water to freshen the supply. Dispense

and discard an additional 7 glasses to

completely rinse out tank.

Unit not properly connected to cold water

line.

Connect unit to cold water line which

supplies water to kitchen tap.

Sound of ice dropping This sound is normally made when automatically made ice is dropped into ice storage

bin. Volume may vary according to refrigerator’s location.

Sound of water supply This sound is normally made when ice maker is supplied with water after dropping the

automatically made ice.

The display shows

the word OFF (After

20 seconds the word

OFF disappears but the

rergerator is still in the

DEMO MODE).

The refrigerator is in the Demo(Demonstration) Mode. The Demonstration Mode disables the

cooling system, only the lighting system and the display operate in a regular way. To disable

the Demo Mode open the door and holding down the Fridge button press the EXPRESS F

button 3 times

After deactivating the Demo Mode, the previously set values will appear.

Other Please thoroughly read ‘Automatic ice maker and dispenser’ in this manual.

DISPOSAL OF YOUR OLD APPLIANCE

1. When this crossed-out wheeled bin symbol is attached to a product it

means the product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately

from the municipal waste stream via designated collection facilities

appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential

negative consequences for the environment and human health.

4. For more detailed information about disposal of your old

appliance,please contact your local Council, waste disposal service or

the shop where you purchased the product.

This product contains fluorinated greenhouse gases covered by the Kyoto Protocol (Optional).

• Information of fluorinated greenhouse gases

used as refrigerant of this refrigerator.

Chemical name Composition of Gases Total GWP (kg CO2-eq)

R-134a 100% HFC-134a 1300

Care and maintenance

ENGLISH