Table of Contents
- Contents
- Matrox safety information
- Before you begin
- Getting started
- Overview
- Setting up a display wall
- Planning your output layout
- Installing your Matrox cards
- Description of LED indicators
- Connecting your MURA-IPX-O4DF card
- Connecting your Mura IPX Series card
- Connecting your Mura MPX Series card
- Connecting your CSeries card
- Validating the network discovery of your Mura IPX Series cards
- Software overview
- Installing your software
- Configuring your display wall layout
- Matrox MuraControl software
- Troubleshooting
- Product information
- Appendix A - Firewall requirements
- Appendix B - Adding a console display
- Appendix C - Matrox secure cable solution
- Customer support
Matrox Mura MPX-4/2 User Manual
Displayed below is the user manual for Mura MPX-4/2 by Matrox which is a product in the Graphics Cards category. This manual has pages.
Related Manuals
User Guide
20129-301-0510
2017.09.25
Matrox
™
Mura
™
IPX Series, Mura
™
MPX Series, C-Series
MURA-IPX-O4DF
MURA-IPX-I4EF • MURA-IPX-I4EHF • MURA-IPX-I4DF • MURA-IPX-I4DHF
MPX-4/4 • MPX-4/2 • MPX-4/0
MPX-V16 • MPX-V8
MPX-SDI
C900 • C680
ENGLISH
2 Matrox Display Wall – User Guide
Contents
Matrox safety information ....................................................................................... 7
Installation and operation...........................................................................................................................7
If a power supply (internal or external) was included with your product................................................ 7
If your product includes laser-based technology .......................................................................................8
If your product includes a battery............................................................................................................... 8
Repair ...........................................................................................................................................................8
Before you begin ..................................................................................................... 9
Using a validated platform ..........................................................................................................................9
Preventing damage to your hardware.........................................................................................................9
When installing your hardware....................................................................................................... 9
When connecting your hardware.................................................................................................... 9
Getting started....................................................................................................... 10
Hardware supplied.....................................................................................................................................10
Software supplied....................................................................................................................................... 11
More information......................................................................................................................................11
Overview ................................................................................................................ 12
Supported product combinations.............................................................................................................12
Supported product capabilities................................................................................................................. 12
Components of a display wall setup ......................................................................................................... 13
Supported output types................................................................................................................. 13
Supported input types ................................................................................................................... 14
Setting up a display wall ....................................................................................... 15
Setup overview...........................................................................................................................................15
MURA-IPX-04DF.......................................................................................................................... 15
Mura IPX Series ............................................................................................................................. 15
Mura MPX Series........................................................................................................................... 16
C900 or C680 ................................................................................................................................. 16
Determining the order of your input connectors ....................................................................................17
Planning your output layout .................................................................................. 18
Mura MPX Series....................................................................................................................................... 18
Setting your card order.................................................................................................................. 18
Setting the order of your output connectors................................................................................ 18
Using PowerDesk to manage your multi-display layout.............................................................. 19
Matrox Display Wall – User Guide 3
Using a multi-display layout with an even number of columns ................................................. 19
Using a multi-display layout with an uneven number of columns............................................. 20
C-Series ...................................................................................................................................................... 20
Using PowerDesk to manage your multi-display layout.............................................................. 20
Installing your Matrox cards ................................................................................. 22
Step-by-step installation............................................................................................................................22
Installing multiple cards............................................................................................................................24
Interconnecting multiple cards (Framelock) ............................................................................... 24
Description of LED indicators ............................................................................... 26
MURA-IPX-O4DF, MURA-IPX-I4EF, MURA-IPX-I4EHF, MURA-IPX-I4DF, and MURA-IPX-I4DHF
26
Network connector........................................................................................................................ 27
Mura MPX-4/4, MPX-4/2, and MPX-4/0 ................................................................................................27
Mura MPX-V16 and MPX-V8..................................................................................................................28
Mura MPX-SDI..........................................................................................................................................28
Connecting your MURA-IPX-O4DF card .............................................................. 29
MURA-IPX-O4DF.....................................................................................................................................29
Connection overview..................................................................................................................... 29
Desciption of supported connections........................................................................................... 29
Connecting your Mura IPX Series card ................................................................ 31
MURA-IPX-I4EF, MURA-IPX-I4EHF, MURA-IPX-I4DF, and MURA-IPX-I4DHF .......................... 32
Connection overview..................................................................................................................... 32
Description of supported connections ........................................................................................ 32
Connecting your Mura MPX Series card .............................................................. 33
Mura MPX-4/4 and MPX-4/2...................................................................................................................34
Connection overview..................................................................................................................... 34
Description of cables ..................................................................................................................... 35
Description of supported connections ......................................................................................... 35
Mura MPX-SDI..........................................................................................................................................36
Connection overview..................................................................................................................... 36
Description of cables ..................................................................................................................... 36
Description of supported connections ......................................................................................... 37
Mura MPX-4/0...........................................................................................................................................38
Connection overview..................................................................................................................... 38
Description of cables ..................................................................................................................... 39
4 Matrox Display Wall – User Guide
Description of supported connections ......................................................................................... 39
Mura MPX-V16 and MPX-V8..................................................................................................................40
Connection overview..................................................................................................................... 40
Description of cable....................................................................................................................... 41
Description of supported connections ......................................................................................... 41
Connecting your C-Series card............................................................................. 42
C900............................................................................................................................................................ 43
Connection overview..................................................................................................................... 43
Description of supported connections ..................................................................................... 43
C680............................................................................................................................................................ 44
Connection overview..................................................................................................................... 44
Description of supported connections. ........................................................................................ 44
Validating the network discovery of your Mura IPX Series cards ....................... 45
Multiple subnet support............................................................................................................................ 45
Software overview ................................................................................................. 46
Available software ...................................................................................................................................... 46
Matrox drivers................................................................................................................................ 46
PowerDesk...................................................................................................................................... 46
SDKs and APIs............................................................................................................................... 46
MuraControl .................................................................................................................................. 47
More information......................................................................................................................................47
Installing your software ......................................................................................... 48
Obtaining a driver and additional software ............................................................................................. 48
Before you install .......................................................................................................................................48
Installing your driver .................................................................................................................................48
Windows......................................................................................................................................... 48
Linux............................................................................................................................................... 48
Installing your APIs ...................................................................................................................................48
Updating your MURA-IPX-04DF card ....................................................................................................49
Configuring your display wall layout..................................................................... 50
Using the Network API to manage your layout .......................................................................................50
Using PowerDesk to set up your multi-display layout.............................................................................50
Mura MPX Series........................................................................................................................... 50
C-Series .......................................................................................................................................... 50
Matrox MuraControl software ............................................................................... 52
Matrox Display Wall – User Guide 5
Supported Matrox hardware ..................................................................................................................... 52
Obtaining MuraControl software.............................................................................................................52
More information......................................................................................................................................52
Troubleshooting ..................................................................................................... 53
What to do if you have a problem............................................................................................................. 53
Common problems and solutions ............................................................................................................53
Product information............................................................................................... 56
Specifications .............................................................................................................................................56
MURA-IPX-O4DF ........................................................................................................................ 56
MURA-IPX-I4EF, MURA-IPX-I4EHF, MURA-IPX-I4DF, MURA-IPX-I4DHF....................... 57
Mura MPX-4/0, MPX-4/2, MPX-4/4, MPX-SDI......................................................................... 58
Mura MPX-V8, MPX-V16 ............................................................................................................ 59
C900, C680..................................................................................................................................... 60
Additional specifications – Matrox consoles ...........................................................................................61
Environmental ...........................................................................................................................................63
Mean Time Before Failure (MTBF).......................................................................................................... 63
Notes...........................................................................................................................................................64
Appendix A – Firewall requirements ..................................................................... 65
Network API and MuraControl................................................................................................................65
Display wall system.................................................................................................................................... 65
Matrox IPX Updater ..................................................................................................................................66
Accessing your Windows Firewall settings ............................................................................................... 66
Appendix B – Adding a console display............................................................... 67
Supported hardware ..................................................................................................................................67
Matrox P690 PCIe ×16 ..............................................................................................................................67
Connection overview..................................................................................................................... 67
Description of supported connections ......................................................................................... 68
Matrox P690 Plus LP PCIe ×16 (dual-monitor cable) ............................................................................ 68
Connection overview..................................................................................................................... 68
Description of cable....................................................................................................................... 69
Description of supported connections ......................................................................................... 69
Matrox P690 Plus LP PCIe ×16 (quad-monitor cable) ...........................................................................70
Connection overview..................................................................................................................... 70
Description of cable....................................................................................................................... 70
Description of supported connections ......................................................................................... 71
6 Matrox Display Wall – User Guide
Matrox M9120 and M9125 PCIe ×16.......................................................................................................71
Connection overview..................................................................................................................... 71
Description of supported connections ......................................................................................... 71
Matrox M9120 Plus LP PCIe ×1 / ×16 .....................................................................................................72
Connection overview..................................................................................................................... 72
Description of cable....................................................................................................................... 72
Description of supported connections ......................................................................................... 73
Matrox M9140 LP PCIe ×16 ..................................................................................................................... 73
Connection overview..................................................................................................................... 73
Description of cables ..................................................................................................................... 74
Description of supported connections ......................................................................................... 74
Matrox M9128 LP PCIe ×16 ..................................................................................................................... 74
Connection overview..................................................................................................................... 74
Description of supported connections ......................................................................................... 75
Matrox M9138 LP PCIe ×16 and M9148 LP PCIe ×16 ...........................................................................75
Connection overview..................................................................................................................... 75
Description of supported connections ......................................................................................... 76
Appendix C – Matrox secure cable solution ........................................................ 77
Mini HDMI® – MURA-IPX-I4EF • MURA-IPX-I4EHF • MURA-IPX-I4DF • MURA-IPX-I4DHF... 77
Customer support.................................................................................................. 79
Matrox Web................................................................................................................................................ 79
Technical support....................................................................................................................................... 79
Information we need ..................................................................................................................... 79
Program specific problems............................................................................................................ 80
Driver and software download.................................................................................................................. 80
View your warranty information..............................................................................................................80
Third party software notices and/or additional terms and conditions...................................................80
Register your Matrox product...................................................................................................................80
Matrox Display Wall – User Guide 7
Matrox safety information
To ensure safe and reliable operation of your Matrox product, to avoid personal injury, and
to prevent damage to your computer or Matrox hardware, read the following guidelines.
Installation and operation
Read and retain all instructions. Only use your Matrox product according to the
instructions, operating ranges, and guidelines provided in the Matrox user guide and
other related Matrox documentation. Failure to follow these instructions could result in
damage to your product or injury to the user or installer.
Don’t expose your Matrox product to rain, water, condensation, or moisture.
Your Matrox product (card or unit) can become hot while operating. Always
turn off your computer, unplug it, then wait for it to cool before touching any
of the internal parts of your computer or installing your Matrox card. Allow
hot surfaces to cool before touching your Matrox unit.
Static electricity can severely damage electronic parts. Before touching any electronic
parts, drain static electricity from your body (for example, by touching the metal frame
of your computer).
When handling a card, carefully hold it by its edges and avoid touching its circuitry.
Don’t stack devices or place devices so close together that they’re subject to recirculated
or preheated air.
Don’t operate your system or Matrox product near a heat source or restrict airflow to
your system, and make sure the ambient temperature doesn’t exceed the maximum
recommended temperatures. Don’t block ventilation holes on your unit or system.
If a power supply (internal or external) was included with your
product
Don’t place the external power supply directly on top of the device.
Only use power supplies originally supplied with the product or use a replacement that’s
approved by Matrox. Don’t use the power supply if it appears to be defective or has a
damaged chassis.
8 Matrox Display Wall – User Guide
Don’t defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug doesn’t fit into your outlet, consult an electrician to replace
the obsolete outlet.
Make sure that nothing rests on the power cables and that the cables aren’t located where
they can be stepped on, pinched, or tripped over.
Don’t use damaged power cables.
Unplug your system or device during lightning storms or if unused for long periods of
time.
If your product includes laser-based technology
The device contains a Class 1 laser product for use only under the recommended
operating conditions and guidelines. For more information, see your Matrox user guide.
Invisible laser radiation may be emitted from disconnected fibers or connectors. Don’t
stare into beams or view directly with optical instruments.
Only use optical transceivers originally supplied with the product or use a replacement
that’s approved by Matrox.
For more information on laser support and compliance, see your Matrox user guide.
If your product includes a battery
The battery is non replaceable.
To dispose of your product, see www.matrox.com/environment/weee.
Repair
Don’t attempt to open or repair a power supply unit (if one was supplied).
Don’t attempt to open or repair your Matrox product.
If there’s a fault with your Matrox product, review your Matrox warranty for more
information.
Matrox Display Wall – User Guide 9
Before you begin
To avoid personal injury and to prevent damage to your system or Matrox hardware, read the
following guidelines before installing your Matrox hardware.
Using a validated platform
For detailed information on how to install your Matrox Mura card in a validated systems,
see the Matrox System Builder’s Guide (www.matrox.com/mura/support).
For information on validated systems, motherboards, and chassis models, contact your
Matrox representative or see the Matrox web site (www.matrox.com/graphics).
Preventing damage to your hardware
When installing your hardware
Always turn off your system, unplug it, then wait for it to cool before touching any of the
internal parts of your system or installing your Matrox product.
While your system is turned off but still plugged in, some electrical current is supplied
to the motherboard. This current may prevent newly installed hardware from working
properly.
Static electricity can severely damage electronic parts. Before touching any electronic
parts, drain static electricity from your body (for example, by touching the metal frame
of your system).
When handling a card, carefully hold it by its edges and avoid touching its circuitry.
Always try to insert or remove your card as straight as possible.
When connecting your hardware
Whenever you change your connection setup, make sure you’re using the correct
connectors and that all connectors are properly fastened.
Don’t change connections while your system is turned on. Before changing connections,
make sure your system is shut down and turned off.
Whenever you restart your system, make sure your monitors are already turned on.
Otherwise, the software may not be able to properly detect your monitors.
When connecting devices, make sure the connectors are properly fastened.
10 Matrox Display Wall – User Guide
Getting started
Thank you for purchasing a Matrox Display Wall product. You can use Matrox Mura IPX, Mura MPX
Series, and C-Series cards as standalone solutions, combined with eath other, or with third-party
*
hardware to extend the capabilities of your Matrox-based display wall controller.
Hardware supplied†
Mura IPX Series
–
MURA-IPX-O4DF
– Mura IPX card, 2 ribbon cables
‡
(for framelock).
MURA-IPX-I4DF and MURA-IPX-I4DHF
– Mura IPX card, 2 ribbon cables
‡
(for
framelock).
MURA-IPX-I4EF and MURA-IPX-I4EHF
– Mura IPX card, 2 ribbon cables
‡
(for
framelock).
Matrox C-Series
–
C900
– C-Series graphics card.
C680
– C-Series graphics card.
Mura MPX Series
–
Mura MPX-4/4 –
Mura MPX card, 2 KX20 to quad-DVI cables, 8 DVI to HD-15
adapters, 2 ribbon cables (for framelock), washer.
Mura MPX-4/2 –
Mura MPX card, 1 KX20 to quad-DVI cable, 1 KX20 to dual-DVI
cable, 6 DVI to HD-15 adapters, 2 ribbon cables (for framelock), washer.
Mura MPX-4/0 –
Mura MPX card, 1 KX20 to quad-DVI cable, 4 DVI to HD-15 adapters,
2 ribbon cables (for framelock), washer.
Mura MPX-SDI
– Mura MPX card, 1 KX20 to dual-DVI cable, 2 DVI to HD-15 adapters,
2 DIN to BNC adapters, 2 ribbon cables (for framelock), washer.
Mura MPX-V16
– Mura MPX card, 2 DVI to BNC adapters, 1 ribbon cable (for
framelock), washer.
Mura MPX-V8
– Mura MPX card, 1 DVI to BNC adapter, 1 ribbon cable (for
framelock), washer.
* For more information on supported third-party graphics cards, see the release notes. For information on how to configure your
system, see “Matrox System Builder’s Guide.”
† The hardware supplied with your Matrox product may vary depending on the SKU or part number of your product. For more
information, contact your Matrox representative.
‡ Matrox Mura IPX Series – The ribbon cables (for framelock) are currently unsupported.
Matrox Display Wall – User Guide 11
Optional hardware (sold separately)
Depending on your connection setup, you may need additional hardware. For more information, see
the “Connection setup” section for your Matrox product.
Software supplied
Windows
®
driver package – Matrox provides a 64-bit version of the driver to use your
Matrox display wall products.
Linux
®
package – Matrox supports various distibutions for your Matrox display wall
products. For more information, see the
Readme
file included with the Matrox package
for Linux.
SDKs and APIs – Matrox offers a range of software, API, and libraries to configure your
display wall and to create your own custom interfaces and applications.
For more information on the software available for your Matrox product, see “Software overview”,
page 46.
More information
We provide additional information in help and
Readme
files. Be sure to check for any last-minute
release notes included with your product. Also, check the Matrox web site
(www.matrox.com/graphics) for the latest Matrox software, technical support, and product
information.
12 Matrox Display Wall – User Guide
Overview
Supported product combinations
Supported product capabilities
Mura IPX
Series*
* Excluding MURA-IPX-O4DF.
Mura MPX
Series MURA-
IPX-O4DF C900 C680 Third-
party
hardware†
† For more information on supported third-party graphics cards, see the release notes. For information on how to configure your
system, see “Matrox System Builder’s Guide.”
MURA-IPX-O4DF ——————
Mura IPX Series*99—999
Mura MPX Series 99————
Matrox C-Series
(C900 or C680) 9——99—
MURA-IPX-O4DF Mura IPX Series*
and C-Series
(or third-party
hardware†)
* Excluding MURA-IPX-O4DF.
† For more information on supported third-party graphics cards, see the release notes. For information on how to configure your
system, see “Matrox System Builder’s Guide.”
Mura MPX Series
and/or
Mura IPX Series*
Supported operating
system —‡
‡ MURA-IPX-O4DF is a standalone controller that doesn’t require an operating system.
Windows® 10
Windows® Server®
2012 R2
Windows®Server®
2008
R2
Windows® 7
Windows®
Embedded Standard
7
Linux®
Windows®
Embedded Standard
7 (64-bit)
Windows® 7
Professional (64-bit)
Windows® 7
Professional for
Embedded Systems
(64-bit)
Windows® Server®
2008 R2 (64-bit)
Maximum number of
output cards per
controller
1§
§ You can install multiple MURA-IPX-O4DF products in the same system.
2× C900 or C680
Third-party hardware 14
Maximum number of
outputs per controller 4 6 to 18 2 to 56
Matrox Display Wall – User Guide 13
Components of a display wall setup
Supported output types
MURA-IPX-O4DF Mura IPX Series
and C-Series
(or third-party
hardware*)
* For more information on supported third-party graphics cards, see the release notes. For information on how to configure your
system, see “Matrox System Builder’s Guide.”
Mura MPX Series
and/or
Mura IPX Series
DisplayPort MURA-IPX-O4DF C680
Third-party hardware —
HDMI —C900
Third-party hardware —
DVI —C900
Third-party hardware
Mura MPX-4/4
Mura MPX-4/2
Mura MPX-4/0
Mura MPX-SDI
HD-15 ——
Mura MPX-4/4
Mura MPX-4/2
Mura MPX-4/0
Mura MPX-SDI
14 Matrox Display Wall – User Guide
Supported input types
MURA-IPX-O4DF Mura IPX Series*
and C-Series
(or third-party
hardware†)
* Using the fanless versions of Mura IPX Series cards requires a validated system. For more information, see “Matrox System
Builder’s Guide.”
† For more information on supported third-party graphics cards, see the release notes. For information on how to configure your
system, see “Matrox System Builder’s Guide.”
Mura MPX Series
and/or
Mura IPX Series
IP source MURA-IPX-O4DF
MURA-IPX-I4EF
MURA-IPX-I4EHF
MURA-IPX-I4DF
MURA-IPX-I4DHF
MURA-IPX-I4EF
MURA-IPX-I4EHF
MURA-IPX-I4DF
MURA-IPX-I4DHF
HDMI —
MURA-IPX-I4EF
MURA-IPX-I4EHF
MURA-IPX-I4DF
MURA-IPX-I4DHF
MURA-IPX-I4EF
MURA-IPX-I4EHF
MURA-IPX-I4DF
MURA-IPX-I4DHF
DVI —
MURA-IPX-I4EF
MURA-IPX-I4EHF
MURA-IPX-I4DF
MURA-IPX-I4DHF
MURA-IPX-I4EF
MURA-IPX-I4EHF
MURA-IPX-I4DF
MURA-IPX-I4DHF
Mura MPX-4/4
Mura MPX-4/2
HD-15 ——
Mura MPX-4/4
Mura MPX-4/2
S-video ——
Mura MPX-4/4
Mura MPX-4/2
Mura MPX-V16
Mura MPX-V8
Composite video
(RCA or BNC) ——
Mura MPX-SDI
Mura MPX-V16
Mura MPX-V8
Component video ——
Mura MPX-4/4
Mura MPX-4/2
Matrox Display Wall – User Guide 15
Setting up a display wall
The following outlines the steps for installing, connecting, and setting up your Matrox card.
Setup overview
MURA-IPX-04DF
1
Install your Matrox cards – see page 22.
2
Connect your cards – see page 41.
3
Update the software on your cards – see page 49.
4
Configure your display wall. You can use the following:
Matrox Network API – see page 50.
MuraControl for Windows – see page 52.
Mura IPX Series
1
Install your Matrox cards – see page 22.
2
Connect your cards – see page 42.
3
Install your Matrox software – see page 48.
4
Configure your display wall. You can use the following:
Matrox Network API – see page 50.
Matrox PowerDesk – see page 50.
MuraControl for Windows – see page 52.
Using third-party graphics hardware* with Mura IPX Series
1
Install your Matrox cards – see page 22.
2
Connect your cards –
Third-party hardware. For more information, see the documentation for your
graphics hardware.
* For more information on supported third-party graphics cards, see the release notes. For information on how to configure your
system, see “Matrox System Builder’s Guide.”
16 Matrox Display Wall – User Guide
Mura IPX Series
*
cards – see page 42.
3
Install the driver for your third-party hardware. For more information, see the
documentation for your graphics hardware.
4
Install the Matrox software for your Mura IPX Series cards – see page 48.
5
Set up your multi-display layout. For more information, see the documentation for your
graphics hardware.
6
Configure your display wall. You can use the following:
Matrox Network API – see page 50.
MuraControl for Windows – see page 52.
Mura MPX Series
1
Install your Matrox cards – see page 22.
2
Connect your cards – see page 33.
3
Install your Matrox software – see page 48.
4
Configure your display wall. You can use the following:
Matrox Network API – see page 50.
Matrox PowerDesk – see page 50.
MuraControl for Windows – see page 52.
C900 or C680
1
Install your Matrox cards – see page 22.
2
Connect your cards – see page 42.
3
Install your Matrox software – see page 48.
4
Configure your display wall. You can use the following:
Matrox Network API – see page 50.
Matrox PowerDesk – see page 50.
MuraControl for Windows – see page 52.
Matrox Display Wall – User Guide 17
Determining the order of your input connectors
Mura IPX Series
*
and Mura MPX Series
†
products have input connectors. To determine how these
inputs are numbered, use the following guidelines:
Cards are ordered in groups based on their order on the PCI bus. These groups are:
1
Mura MPX-4/4, MPX-4/2, and MPX-SDI.
You can specify the order of the cards in this group through DIP switches. For more
information, see “Setting your card order”, page 18.
2
Mura MPX-V16 and MPX-V8.
3
MURA-IPX-I4EF, MURA-IPX-I4EHF, MURA-IPX-I4DF, and MURA-IPX-I4DHF.
Inputs are then ordered according to the order of the connectors on the card.
*Except MURA-IPX-O4DF.
† Except Mura MPX-4/0.
18 Matrox Display Wall – User Guide
Planning your output layout
This section describes the steps to consider if you’re setting up a Mura-based display wall for the first
time. We recommend you review these steps
before
setting up your display wall.
Mura MPX Series
Setting your card order
Mura MPX-4/4, MPX-4/2, MPX-4/0,
MPX-SDI only
– The DIP switches on your
Mura MPX Series output cards are used to
control the order in which the GPUs of
your cards are used. Setting the DIP
switches is useful if you’re setting up a large
display wall layout that uses multiple cards,
because it enables PowerDesk software to
properly lay out the outputs of your display
wall and avoids you having to manually set
up your multi-display layout.
For example, setting the first card to
0
means that card will be the first one used,
and the first GPU of that card will be
identified by PowerDesk as
A
.
To set the DIP switches on your cards, use
the tip of a pen or pencil to flip the switch
on or off. We recommend setting your card
order as follows, starting with card
0
.
*
Setting the order of your output connectors
Monitors are numbered consecutively based on which
connector each is attached to. For example, on an Mura
MPX Series output card using a quad-monitor cable, the
monitor attached to the connector labeled
1
on the cable is
identified as
1
, the monitor attached to the connector
labeled
2
on the cable is identified as
2
, and so on.
* The DIP switches use binary counting to set the card order.
KX20 to quad-DVI cable
Matrox Mura Display Wall – User Guide 19
To facilitate the setup of your multi-display layout, we recommend connecting your monitors
consecutively and arranging your monitors in pairs.
Using PowerDesk to manage your multi-display layout
In a multi-card setup using Matrox Mura MPX Series cards, PowerDesk assigns letters
to the GPU and numbers to the outputs associated with that GPU.
In the examples below, the order of the first card (4 outputs) is set as
0
, so its GPUs are identified as
A
and
B
. The four monitors connected to the first card are then identified as
A1
,
A2
,
B1
, and
B2
, which
correspond to the monitors attached to connectors labeled respectively
1
,
2
,
3
, and
4
on your KX20 to
quad-DVI cable.
Using a multi-display layout with an even number of columns
This multi-display layout shows a 6
×
4 display wall. In this case, monitors are paired and follow each
other sequentially from left to right (for example,
A1
,
A2
,
B1
,
B2
,
C1
,
C2
, and so on).
20 Matrox Mura Display Wall – User Guide
Using a multi-display layout with an uneven number of columns
This multi-display layout shows a 5
×
5 display wall. In this case, monitors are paired but don’t follow
each other sequentially from left to right. In this case, the GPUs associated with the last card (
K1
,
K2
,
L1
,
L2
,
M1
) are placed in the last column of the layout.
Depending on your installation and connection, you may need to manually rearrange the outputs of
your multi-display layout in PowerDesk to match the physical layout of your display wall.
For more information on setting up multiple displays, see “Configuring your display wall layout”,
page 50.
After planning your output layout, you’re ready to install your cards (see “Installing your Matrox
cards”, page 22).
C-Series
Using PowerDesk to manage your multi-display layout
In a multi-card setup, PowerDesk assigns letters to the GPU and numbers to the outputs
associated with that GPU. Each card is identified with a unique GPU. C900 cards have
three (3) outputs (
1
,
2
, or
3
) using one or three connectors each. Output
1
uses
connectors
1
,
2
, and
3
. Output
2
uses connectors
4
,
5
, and
6
. Output
3
uses connectors
7
,
8
, and
9
.
C680 cards have six (6) outputs with a single connector each.
Matrox Mura Display Wall – User Guide 21
For example, this multi-display layout shows a 5
×
3 display wall on a C-Series based controller with
one (1) C900 card and one (1) C680 card. On C900, each output uses three (3) monitors left to right
and each output is placed one over another to create the 3 × 3 section on the left of the display wall.
On C680, each output uses a single monitor to fill in the 2 × 3 section on the right.
22 Matrox Display Wall – User Guide
Installing your Matrox cards
This section describes how to install your Matrox card. If your Matrox card is already installed in your
system, skip to the “Connection setup” section for the card you want to install. For information
specific to your system, like how to remove its cover, see your system manual.
Step-by-step installation
1Open your system and remove
your existing card
If a card
isn’t
already installed, skip to step 2.
a
Using
Programs and Features
in the
Windows
Control Panel
, remove any
currently installed display drivers.
Restart your system for the changes to
take effect.
After your system restarts, you may be
prompted to install drivers for the new
graphics hardware detected. Click
Cancel
.
b
Turn off your system and all peripherals such as your monitor or printer.
c
Open the system and remove your existing card (if any).
2Choose an expansion slot
Most systems have different types of
expansion slots. Choose a PCI Express
®
(PCIe
®
) slot depending on the type of card
you have. Your system manual should
identify the location of each type of
expansion slot in your system.
(Back of system)
(×4)
(×16)
(×8)
(64-bit)
PCI
slots PCI Express
slots
(32-bit)
(×1)
Matrox Display Wall – User Guide 23
3Insert your Matrox card
a
Position your Matrox card over the
expansion slot you’ve chosen.
b
Push the card in firmly and evenly until
it’s fully seated in the slot.
c
Secure the bracket of your Matrox card
to the frame of your system.
4Secure the bracket of your Matrox card
Mura MPX Series only –
To support the weight of your cable and to avoid damaging your
Matrox card, you need to properly secure the bracket of your card to your system.
a
To secure your bracket, slip the washer
provided with your Matrox product
over the connectors, then screw the
washer onto the bracket of your Matrox
card.
b
Make sure the washer lies flat against the
frame of your system.
Your Matrox card is now installed. If you’re installing more than one card, see “Installing multiple
cards”, page 24.
Before restarting your system
, connect your monitors or devices (see the “Connection
setup” section for the card you want to connect).
After connecting
, restart your system and install your
Matrox software.
Note:
If your system has multiple PCIe ×16 slots, your choice of PCIe slot may affect your
card or system performance. Some PCIe ×16 slots support only 8 or 4 lanes. Make sure the
PCIe slot you choose supports the proper number of lanes for your Mura card. For more
information, see your computer manual or the Matrox System Builder’s Guide.
Washer
Matrox
card
24 Matrox Display Wall – User Guide
Installing multiple cards
Your chassis model may support the installation of multiple Matrox cards in your system. For
information on validated platforms, contact your Matrox representative or see the Matrox web site
(www.matrox.com/graphics).
Interconnecting multiple cards (Framelock)
Mura MPX Series, C900, and C680 only
– If you have multiple Mura MPX output cards or
multiple C900 or C680 graphics cards installed in your system, you can synchronize the
frame rate of all your outputs by interconnecting your cards with a ribbon cable.
*
Mura MPX Series –
Attach the ribbon cable
to the connector labeled
Out
on one card to
the connector labeled
In
on the next card.
Depending on the length needed, use either
the long or short ribbon cable included with
your product.
Repeat this for every card installed.
C900 and C680 –
You can interconnect either two C900 graphics cards or two C680 graphics
cards.
Attach the ribbon cable to the connector
labeled
GEN0
on one card and to the
connector labeled
GEN0
on the next
graphics card.
WAR NING:
To avoid damaging your
cards, always insert your card as straight as
possible into the slot. Don’t rock the card
from side to side. If you meet resistance,
don’t force the card into the slot.
* Matrox C900 and C680 – Ribbon cable sold separately.
Out In
GEN0 GEN1
Matrox Display Wall – User Guide 25
WAR NING:
To ma ke s u r e the c a b le i s
inserted properly, the cable edge marked
with a red line should be closest to the
bracket.
Ribbon cable
Connector
26 Matrox Display Wall – User Guide
Description of LED indicators
Your Matrox Mura cards have LED indicators that show you the configuration status of your setup
and help you troubleshoot your cards.
MURA-IPX-O4DF, MURA-IPX-I4EF, MURA-IPX-I4EHF,
MURA-IPX-I4DF, and MURA-IPX-I4DHF
Your Matrox MURA-IPX-O4DF, MURA-IPX-I4EF, MURA-IPX-I4EHF, MURA-IPX-I4DF, and
MURA-IPX-I4DHF cards have one LED indicator on their bracket.
The following describes the behavior of this LED indicator.
LED Color Behavior
Green (solid) Card is active.
Green (slow blink) Card is restarting.
Green (fast blink) Factory reset in process.
Amber (solid) Card is in maintenance mode.
Amber (slow blink) Card is restarting and is in maintenance mode.
Amber (fast blink) Card is updating the firmware.
Red (solid)
Card has detected a fatal error. Try restarting your system. If after
restarting your system the LED indicator is still red, contact your vendor
for technical support (see “Customer support”, page 79).
Red (slow blink)
Card has detected a misconnection. Try restarting your system. If after
restarting your system the LED indicator is still red, contact your vendor
for technical support (see “Customer support”, page 79).
Black (off)
No power. Make sure your card is properly installed. Also, make sure your
system isn’t in power saving mode (see “Installing your Matrox cards”,
page 22).
For more information, contact your vendor (see “Customer support”, page
79).
MURA-IPX-O4DF
MURA-IPX-I4EF, MURA-IPX-I4EHF, MURA-IPX-I4DF, and MURA-IPX-I4DHF
Matrox Display Wall – User Guide 27
Network connector
The network connectors on your IPX Series cards use LED indicators to
provide information on the network activity and presence. The following
describes the different network connector LEDs.
Mura MPX-4/4, MPX-4/2, and MPX-4/0
Your Matrox Mura MPX Series cards have four LED indicators labeled (
Good
,
12V
,
Fail
,
CFG_Done
).
The following describes the behavior of these LED indicators.
LED color Network activity Network presence
No LED (black) No data transfer in progress
or no network detected.
No communication
established.
Green (fast blink) Data transfer in progress. —
Orange — Network communication
established.
LED Color Behavior
Good Green Card is active.
12V Green Card is properly powered.
Fail Red
Card may have insufficient power. Try restarting your system.
If after restarting your system the LED indicator is still red,
contact your vendor for technical support (see “Customer
support”, page 79).
CFG_Done Black (off)
Problem occured while programming your card. For more
information, contact your vendor (see “Customer support”,
page 79).
Network
activity Network
presence
28 Matrox Display Wall – User Guide
Mura MPX-V16 and MPX-V8
Your Matrox Mura MPX-V16 card has three LED indicators labeled (
Power Good
,
FP1 Done
,
FP2
Done
) and your Mura MPX-V8 card has two LED indicators labeled (
Power Good
,
FP2 Done
).
The following describes the behavior of these LED indicators.
Mura MPX-SDI
Your Matrox Mura MPX-SDI card has one LED indicator labeled (
CFG_Done
).
The following describes the behavior of these LED indicators.
LED Color Behavior
Power Good Green Card is properly powered.
FP1 Done or
FP2 Done Green Card is active.
FP1 Done or
FP2 Done Black (off)
Problem occured while programming your card. For more
information, contact your vendor (see “Customer support”,
page 79).
LED Color Behavior
CFG_Done Green Card is active.
CFG_Done Black (off)
Problem occured while programming your card. For more
information, contact your vendor (see “Customer support”,
page 79).
(Mura MPX-V16 shown)
Matrox Display Wall – User Guide 29
Connecting your MURA-IPX-O4DF card
This section describes how to connect your MURA-IPX-O4DF card.
MURA-IPX-O4DF
Connection overview
Desciption of supported connections
Note
: To make sure your cables are securely attached to your Matrox cards, use a cable retention
bracket. To purchase a cable retention bracket, contact your Matrox representative. For more
information, see “Appendix C – Matrox secure cable solution”, page 77.
Device connector Description
DisplayPort If your monitor has a DisplayPort connector, attach your mini
DisplayPort to DisplayPort cable to your Matrox card. Connect the
other end of the cable to your monitor.
DVI If your monitor has a DVI connector, use a mini DisplayPort to DVI
adapter (active) to connect to the mini DisplayPort connector on your
Matrox card. Connect your monitor to the DVI connector on your
adapter.
Mini DisplayPort to
DisplayPort cables
Network cable
(RJ-45)
30 Matrox Display Wall – User Guide
Once all your cards are connected, restart your system and install your Matrox software (see
“Installing your software”, page 48).
HDMI If your monitor has an HDMI connector, use a mini DisplayPort to
HDMI adapter (active) to connect to the mini DisplayPort connector
on your Matrox card. Connect your monitor to the HDMI connector
on your adapter.
Network
(RJ-45)
If your video device streams to an IP network, connect a network
cable to your Matrox card. Your video device must stream using an
RTSP protocol.
Device connector Description
Matrox Display Wall – User Guide 31
Connecting your Mura IPX Series card
This section describes how to connect your Mura IPX Series card.
Once all your cards are connected, restart your system and install your Matrox software (see
“Installing your software”, page 48).
Supported hardware More information
Input/Output Mura MPX-4/4, MPX-4/2 See page 34.
Mura MPX-SDI See page 36.
Input
MURA-IPX-I4EF, MURA-IPX-I4EHF,
MURA-IPX-I4DF, MURA-IPX-I4DHF See page 32.
Mura MPX-V16, MPX-V8 See page 40.
Output
Mura MPX-4/0 See page 38.
C900 See page 43.
C680 See page 44.
Console
P690 PCIe ×16 See page 67.
P690 Plus LP PCIe ×16
(dual-monitor cable) See page 68.
P690 Plus LP PCIe ×16
(quad-monitor cable) See page 70.
M9120 PCIe ×16, M9125 PCIe ×16 See page 71.
M9120 Plus LP PCIe ×1 / ×16 See page 72.
M9140 LP PCIe ×16 See page 73.
M9128 LP PCIe ×16 See page 74.
M9138 LP PCIe ×16, M9148 LP PCIe ×16 See page 75.
Note
: To make sure your cables are securely attached to your Matrox cards, use a cable retention
bracket. To purchase a cable retention bracket, contact your Matrox representative. For more
information, see “Appendix C – Matrox secure cable solution”, page 77.
32 Matrox Display Wall – User Guide
MURA-IPX-I4EF, MURA-IPX-I4EHF, MURA-IPX-I4DF, and
MURA-IPX-I4DHF
Connection overview
Description of supported connections
Device connector Description
HDMI If your video device has an HDMI connector, attach your mini HDMI
to HDMI cable to your Matrox card. Connect the other end of the
cable to your video device.
DVI If your video device has a DVI connector, use a mini HDMI to DVI
adapter to connect to the mini HDMI connector on your Matrox card.
Connect your video device to the DVI connector on your adapter.
Network
(RJ-45)
If your video device streams to an IP network, connect a network
cable to your Matrox card. Your video device must stream using an
RTSP protocol.
Mura-IPX-I4EF and Mura-IPX-I4EHF only – You need to connect to
the network to record to a Network Attached Storage (NAS) device or
to stream video.
Note
: To connect to the bracket of your Matrox product, the overmold (or boot) of the
mini HDMI connectors must respect the maximum width (0.551"/14 mm) and thickness
(0.331"/8.4 mm) stated in the HDMI specifications.
Note
: Inputs from your Mura IPX Series cards are ordered according to the order of the
cards on the PCI bus and then the order of the connectors on the card.
Network
cable
(RJ-45)
Mini HDMI
to HDMI
cables
Matrox Display Wall – User Guide 33
Connecting your Mura MPX Series card
This section describes how to connect your Matrox Mura MPX Series card.
Once all your cards are connected, restart your system and install your Matrox software (see
“Installing your software”, page 48).
Supported hardware More information
Input/Output Mura MPX-4/4, MPX-4/2 See page 34.
Mura MPX-SDI See page 36.
Input Mura IPX Series*
* Except MURA-IPX-O4DF.
See page 31.
Mura MPX-V16 , MPX-V8 See page 40.
Output Mura MPX-4/0 See page 38.
Console
P690 PCIe ×16 See page 67.
P690 Plus LP PCIe ×16
(dual-monitor cable) See page 68.
P690 Plus LP PCIe ×16
(quad-monitor cable) See page 70.
34 Matrox Display Wall – User Guide
Mura MPX-4/4 and MPX-4/2
This section describes how to connect your output devices (monitors) and input devices to your Mura
MPX-4/4, and MPX-4/2 cards.
Connection overview
Input cables
(KX20 to Quad-DVI or Dual-DVI)
Component
video cable
Composite
video cable
(RCA)
S-video
cable
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
Output cable
(KX20 to
Quad-DVI)
Matrox Display Wall – User Guide 35
Description of cables
Description of supported connections
Cable Description
Output Mura MPX-4/4 and MPX-4/2 cards use
KX20 to quad-DVI cables to connect up to
four (4) monitors per card.
Monitors are numbered consecutively
based on which connector each is attached
to, starting with connector labeled 1.
Input A Mura MPX-4/4 card uses a KX20 to quad-DVI cables to connect up to
four (4) input devices per card. A Mura MPX-4/2 card uses a KX20 to
dual-DVI cable to connect its input devices.
Device
connector
Output
Input
Description
DVI 99If your monitor has a DVI connector, connect your monitor cable
directly to a DVI connector on your output cable.
If you connect a graphics card with a DVI monitor cable, connect
your monitor cable directly to your input cable.
HD-15 99If your monitor has an HD-15 connector, use a DVI to HD-15
adapter included with your Mura product to connect your monitor
cable to your output cable.
If you connect a graphics card with an HD-15 monitor cable, use
a DVI to HD15 adapter included with your Mura product to
connect your monitor cable to your input cable.
S-video 9If your video device has an S-video connector, use a DVI to
S-video adapter to connect to the DVI connector on your input
cable. Connect your video device to the S-video connector on
your adapter.
Composite 9If your video device has a composite connector, use a DVI to
Composite (RCA) adapter to connect to the DVI connector on your
input cable. Connect your video device to the composite
connector on your adapter.
Component 9If your video device has a component connector, use a DVI to
Component adapter to connect to the DVI connector on your input
cable. Connect your video device to the component connector on
your adapter.
KX20 to quad-DVI cable
36 Matrox Display Wall – User Guide
Mura MPX-SDI
This section describes how to connect your output devices (monitors) and input devices to your Mura
MPX-SDI card.
Connection overview
Description of cables
Cable Description
Output Mura MPX-SDI cards use a KX20 to dual-DVI cable to connect up to two (2)
monitors per card.
Input Mura MPX-SDI cards use a DIN to BNC cable to connect up to two (2) input
devices per card.
Output cable
(KX20 to dual-DVI)
Monitor connector
(HD-15)
Monitor
connector
(DVI)
DVI to HD-15
adapter
BNC to
Composite
adapter
Composite connector
Input cables
(DIN to BNC)
BNC connector
Matrox Display Wall – User Guide 37
Description of supported connections
WAR NING:
To avoid damaging the DIN
connector (1.0/2.3) on your DIN to BNC
adapter or on your card, firmly hold the
adapter, pull back the metal ring around
the DIN connector on the cable, then
carefully remove the DIN to BNC adapter.
Connection
Output
Input
Description
DVI 9If your monitor has a DVI connector, connect your monitor cable
directly to a DVI connector on your output cable.
HD-15 9If your monitor has an HD-15 connector, use a DVI to HD-15
adapter included with your Mura product to connect your monitor
cable to your output cable.
Composite
(RCA)
9If your video device has an RCA composite connector, use a BNC
to Composite (RCA) adapter to connect to the BNC connector on
your input cable. Connect your video device to the composite
connector on your adapter.
Composite
(BNC)
9If your video device has a BNC composite connector, connect the
composite cable directly to the BNC connector on your input
cable.
38 Matrox Display Wall – User Guide
Mura MPX-4/0
This section describes how to connect your output devices (monitors) to your Mura MPX-4/0 card.
Connection overview
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
Output cable
(KX20 to Quad-DVI)
DVI to HD-15
adapter
Matrox Display Wall – User Guide 39
Description of cables
Description of supported connections
Cable Description
Output Mura MPX-4/0 cards use KX20 to quad-DVI
cables to connect up to four (4) monitors per
card.
Monitors are numbered consecutively
based on which connector each is attached
to, starting with connector labeled 1.
Device
connector Description
DVI If your monitor has a DVI connector, connect your monitor cable directly to
a DVI connector on your output cable.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to your
output cable.
KX20 to quad-DVI cable
40 Matrox Display Wall – User Guide
Mura MPX-V16 and MPX-V8
This section describes how to connect your input devices to your Mura MPX-V16 or MPX-V8 card.
Connection overview
Input cables
(DVI to BNC)
Composite video
cable (RCA)
Composite video
cable (BNC)
Composite video
cable (BNC)
S-video cable
Mura MPX-V16 bracket shown
Matrox Display Wall – User Guide 41
Description of cable
Description of supported connections
Cable Description
Input Mura MPX-V16 or MPX-V8 cards use DVI to BNC cables to connect
to input devices.
Connector Description
Composite (RCA) If your video device has an RCA composite connector, use a BNC to
Composite (RCA) adapter to connect to the
Y
connector on your input
cable. Connect your video device to the composite connector on your
adapter.
Composite (BNC) If your video device has a BNC composite connector, connect the
composite cable directly to the
Y
connector on your input cable.
S-video If your video device has an S-video connector, use a BNC to S-video
adapter to connect to the
Y
and
C
connectors on your input cable.
Connect your video device to the S-video connector on your adapter.
42 Matrox Display Wall – User Guide
Connecting your C-Series card
This section describes how to connect your Matrox C-Series card.
Once all your cards are connected, restart your system and install your Matrox software (see
“Installing your software”, page 48).
Supported hardware More information
Input Mura IPX Series*
* Excluding MURA-IPX-O4DF.
See page 31.
Output C900 See page 43.
C680 See page 44.
Console
M9120 PCIe ×16, M9125 PCIe ×16 See page 71.
M9120 Plus LP PCIe ×1 / ×16 See page 72.
M9140 LP PCIe ×16 See page 73.
M9128 LP PCIe ×16 See page 74.
M9138 LP PCIe ×16, M9148 LP PCIe ×16 See page 75.
Note
: To make sure your cables are securely attached to your Matrox cards, use a cable retention
bracket. To purchase a cable retention bracket, contact your Matrox representative. For more
information, see “Appendix C – Matrox secure cable solution”, page 77.
Matrox Display Wall – User Guide 43
C900
This section explains how to connect your output devices (monitors) to your C900 card.
Connection overview
Description of supported connections
Device connector Description
HDMI If your monitor has an HDMI connector, attach your mini HDMI to
HDMI cable to your Matrox card. Connect the other end of the cable
to your monitor.
DVI If your monitor has a DVI connector, use a mini HDMI to DVI adapter
to connect your monitor cable to the mini HDMI connector on your
Matrox card. Connect the other end of the cable to your monitor.
Note
: To connect to the bracket of your Matrox product, the overmold (or boot) of the
mini HDMI connectors must respect the maximum width (0.551"/14 mm) and thickness
(0.331"/8.4 mm) stated in the HDMI specifications.
Monitor connector
(Mini HDMI)
44 Matrox Display Wall – User Guide
C680
This section explains how to connect your output devices (monitors) to your C680 card.
Connection overview
Description of supported connections.
Device connector Description
DisplayPort If your monitor has a DisplayPort connector, attach your mini
DisplayPort to DisplayPort adapter to the mini DisplayPort connector
on your Matrox card. Connect the other end of the cable to your
monitor.
HDMI If your monitor has an HDMI connector, use a mini DisplayPort to
HDMI adapter (active) to connect your monitor cable to the mini
DisplayPort connector on your Matrox card. Connect the other end
of the cable to your monitor.
DVI If your monitor has a DVI connector, use a mini DisplayPort to DVI
adapter (active) to connect your monitor cable to the mini DisplayPort
connector on your Matrox card. Connect the other end of the cable
to your monitor.
Monitor connector
(Mini DisplayPort)
Matrox Display Wall – User Guide 45
Validating the network discovery of your
Mura IPX Series cards
Matrox Mura IPX Series cards are initially assigned their IP addresses through DHCP (Dynamic Host
Control Protocol). After connecting your devices, we recommend verifying that all your devices are
discovered by the network.
Under the
Network
section in the Windows
File Explorer
, make sure the Mura IPX Series cards and
IP source devices connected to the network are listed.
If prompted to enable network discovery and file sharing on your network when validating network
discovery, enable these two features by clicking the prompt at the top of your Windows Explorer
window. These two features must be enabled for Windows to detect the Mura IPX Series cards on your
subnet.
Multiple subnet support
Mura IPX Series in the same subnet can be detected through the UPnP (Universal Plug and Play)
protocol. If you have cards in different subnets of your network, you need to validate network
discovery in each subnet separately.
46 Matrox Display Wall – User Guide
Software overview
Available software
Matrox drivers
PowerDesk
SDKs and APIs
Description Supported hardware
Windows®Windows® 10
Windows® Server® 2012 R2
Windows® 7 (64-bit)
Windows® Server® 2008 R2
Mura IPX Series*
C-Series (C900 and
C680)
* MURA-IPX-O4DF – MURA-IPX-O4DF is a standalone controller that doesn’t require an operating system.
Windows® 7 (64-bit)
Windows® Server® 2008 R2
Windows® Embedded Standard 7
(64-bit)
Windows® Embedded Enterprise 7
(64-bit)
Mura IPX Series*
Mura MPX Series
Linux®For more information on the supported
Linux distributions, see the Readme file
included with your package for Linux.
Mura IPX Series*
C-Series (C680 only)
Description Supported hardware
PowerDesk Your Matrox driver includes Matrox
PowerDesk software. Use Matrox
PowerDesk software to set up your
multi-display layout, change certain
display settings, or access Matrox
features.
Mura MPX Series
C-Series (C900 and
C680)
Description Supported hardware
Network API Command-level API that can be
transmitted from any network device
through Telnet, RS-232, and
HTTP/HTTPS.
Mura IPX Series
Mura MPX Series
C900, C680
Matrox Display Wall – User Guide 47
For more information, see the documentation included with your Matrox API.
MuraControl
For more information, see “Matrox MuraControl software”, page 52.
More information
We provide additional information in help and
Readme
files. Be sure to check for any last-minute
release notes included with your product. Also, check the Matrox web site
(www.matrox.com/graphics) for the latest Matrox software, technical support, and product
information.
Matrox VWLib API C/C++ based API that can be used to
build custom display wall applications.
The VWLib API allows full control of
the Matrox hardware.
Mura IPX Series*
C900, C680
Matrox Display Wall
Controller (DWC) API C/C++ based API that can be used to
build custom display wall applications.
Mura IPX Series*
Mura MPX Series
DirectShow support Matrox filters for Microsoft
DirectShow that can be used to
leverage existing applications for your
Matrox display wall products.
Mura IPX Series*
C900, C680
Matrox tablet SDK Software development kit that can be
used to build applications for tablets
to configure your display wall through
the Matrox Network API.
Mura IPX Series
Mura MPX Series
C900, C680
* Excluding MURA-IPX-O4DF.
Description Supported hardware
MuraControl for
Windows Matrox MuraControl enables you to
configure and manage your Matrox
display wall.
Mura IPX Series
Mura MPX Series
C900, C680
48 Matrox Display Wall – User Guide
Installing your software
This section describes how to install your Matrox driver and software.
Obtaining a driver and additional software
If your Matrox product was provided by the manufacturer of your system, check the web
site of that manufacturer for the latest driver. A driver provided by the manufacturer of
your system is more likely to be tested with your system model.
Matrox makes the latest drivers, software, and utilities available on the Matrox Mura
product page (www.matrox.com/graphics/en/support/drivers/download/mura).
For additional SDKs and APIs, contact your Matrox representative.
Before you install
You may need administrator rights to install or uninstall certain software, or to change
certain settings. For more information, see Windows documentation.
To avoid potential problems, we recommend you install the latest Service Pack and hot
fixes for your version of Windows.
Installing your driver
Windows
Download and run the Matrox driver package, then follow the on-screen instructions.
Linux
Download and run the Matrox driver package for Linux, then follow the on-screen instructions. For
more information on the supported Linux distributions, see the
Readme
file included with your
package for Linux.
Installing your APIs
Run the
MSI
from your Matrox API package. For more information, see the documentation included
with your Matrox API.
Matrox Display Wall – User Guide 49
Updating your MURA-IPX-04DF card
Download the Mura IPX Updater software package. Run the appropriate updater and follow the
on-screen instructions. The Matrox Network API is automatically installed. You can use the Matrox
Network API or MuraControl for Windows to configure your MURA-IPX-O4DF card.
50 Matrox Display Wall – User Guide
Configuring your display wall layout
Using the Network API to manage your layout
Use the Matrox Network API to set up your outputs and configure the advanced features of your
display wall layout.
For more information, see the documentation included with the Network API.
Using PowerDesk to set up your multi-display layout
Setting up your multi-display layout using PowerDesk software involves entering the
number of columns and rows for your display wall layout and adjusting the settings for
your outputs (such as rotation, resolution, color palette, and refresh rate).
Mura MPX Series
To set up a multi-display layout for your Mura MPX Series card:
1
Right-click your Windows desktop and select
Launch Matrox PowerDesk
. From the
main interface of Matrox PowerDesk, click
Multi-Display Setup
.
2
Under
Basic configurations
, select
Use stretched mode
.
3
Enter the number of
Columns
and
Rows
for your multi-display setup, then click
OK
.
4
Preview your setup in the work area. If you’re satisfied, click
OK
or
Apply
to apply your
multi-display layout. Otherwise, click
Cancel
.
Depending on your installation and connection, you may need to manually rearrange
the outputs of your multi-display layout in PowerDesk to match the physical layout of
your display wall.
For more information on setting up multiple displays, see Matrox PowerDesk help.
C-Series
To set up a multi-display layout for your C900 or C680 card:
1
Right-click your Windows desktop and select
Launch Matrox PowerDesk
. From the
main interface of Matrox PowerDesk, click
Multi-Display Setup
.
2
Select a multi-display mode:
C900 –
Click
Set up 3x3 configuration
.
Matrox Display Wall – User Guide 51
C680 –
Right-click a display, click
Use stretched mode
, then select the layout you want
to use for your multi-display setup.
3
Preview your setup in the work area. If you’re satisfied, click
OK
or
Apply
to apply your
multi-display layout. Otherwise, click
Cancel
.
Depending on your installation and connection, you may need to manually rearrange
the outputs of your multi-display layout in PowerDesk to match the physical layout of
your display wall.
For more information on setting up multiple displays, see Matrox PowerDesk help.
52 Matrox Display Wall – User Guide
Matrox MuraControl software
Use Matrox MuraControl for Windows to manage your Matrox display
wall. With MuraControl software, you can create, save, and edit layouts
so your source content appears where and how you want it.
Supported Matrox hardware
Matrox MuraControl for Windows supports the following Matrox hardware:
Matrox Mura IPX Series
Matrox Mura MPX Series
Matrox C-Series (C900 and C680 only)
Obtaining MuraControl software
Matrox MuraControl for Windows software is available for download on the Matrox web site
(www.matrox.com/graphics/en/products/video-wall/muracontrol).
More information
To run Matrox MuraControl for Windows, a USB dongle (hardware lock) is required.
A 21-day free trial of Matrox MuraControl for Windows is available for download. Following the
expiry of the 21-day free trial, you must purchase a software license in the form of a USB dongle to
continue using MuraControl for Windows software.
To purchase a software license, contact your Matrox representative.
For more information on MuraControl software, see the Matrox MuraControl user guide.
Matrox Display Wall – User Guide 53
Troubleshooting
What to do if you have a problem
If you experience problems with your Matrox product:
Make sure your Matrox card is properly installed, you’re using the correct connectors,
and that all connectors are properly fastened.
Make sure you have administrator rights on the system you want to use. For more
information, see Windows documentation.
Review the documentation provided with your Matrox product, including the
information in this section and in your Matrox System Builder’s Guide
(www.matrox.com/mura/support), to see if your problem is already addressed.
For troubleshooting information on your Matrox C-Series product, see your Matrox
C-Series user guide.
If your problem persists, contact Matrox. For more information, see “Customer support”, page 79.
Common problems and solutions
This section addresses specific problems to your Matrox product that could prevent you from using
your system or graphics hardware.
Problem Not all graphics cards in the computer are fully supported
(Software doesn’t work with a certain graphics card, or another
graphics card doesn’t work at all)
1
Cause
If you have different models of graphics cards in your computer, your Matrox driver may not
support all the graphics cards in your computer.
1
Solution
Disable or remove any graphics hardware not supported by the driver you want to use. If
there’s graphics hardware built into the motherboard of your computer that’s not supported
by your software, see your system manual for information on how to disable this graphics
hardware.
54 Matrox Display Wall – User Guide
2
Cause
Windows 10/7
– If the Windows method for driver installation was used (instead of running
the setup program included with your Matrox driver), the driver may not be installed for all
the graphics cards it supports.
1
Solution
Run the setup program included with the Matrox driver. The setup program automatically
installs the driver for each Matrox graphics card it supports.
Problem System performance is slow or degraded
1
Cause
Your system or cards may be overheating.
1
Solution
Make sure the operating temperature of your graphics chip is within a normal range:
1
Access Matrox PowerDesk (see “Using PowerDesk to set up your multi-display layout”,
page 50).
2
From the main interface, click
Help and Troubleshooting
Æ
Troubleshoot
.
3
Check the peak temperature being reported.
2
Cause
You may be using a platform that hasn’t been validated by Matrox.
1
Solution
Use a validated platform. For information on supported systems, motherboards, and chassis
models, contact your Matrox representative or see the Matrox web site
(www.matrox.com/graphics).
Problem Mura IPX Series card not discovered on the network
1
Cause
Your Matrox product may not be properly connected or may be on a different subnet.
1
Solution
Verify the connection and status LEDs on your Matrox product (see “Network connector”,
page 27). Also, make sure your Matrox product is properly connected and that all connectors
are properly fastened.
2
Cause
Your Matrox product may be on an external network or on a different subnet.
1
Solution
Make sure your Mura IPX Series card and the IP source are on the same subnet (see
“Validating the network discovery of your Mura IPX Series cards”, page 45). For more
information, contact your network administrator.
3
Cause
Windows Server 2012 R2/2012/2008 R2 only
– The Windows SSDP Discovery service may
be disabled on your system.
1
Solution
Make sure the SSDP Discovery service is enabled on your system.
Matrox Display Wall – User Guide 55
4
Cause
Network discovery and file sharing may not be enabled on your system.
1
Solution
Enable network discovery and file sharing on your system.
5
Cause
The firewall for your display wall system or for your network may be enabled and may
prevent communication with your Mura IPX Series cards.
1
Solution
Make sure your firewall is properly configured to allow the necessary communication
between your Mura IPX Series cards and the various networked components. For more
information, see “Appendix A – Firewall requirements”.
56 Matrox Display Wall – User Guide
Product information
Specifications
MURA-IPX-O4DF
MURA-IPX-O4DF
Operating systems supported —*
* MURA-IPX-O4DF is a standalone controller that doesn’t require an operating system.
Card type PCIe ×8 2.0 (power only)
Form factor ATX
Memory 4 GB
Connectors 4× Mini DisplayPort, 1× 100/1000 Base-T RJ45 Ethernet Port
Output formats supported†
† DVI and HDMI monitors are supported using identical third-party active adapters (sold separately).
DisplayPort, DVI, HDMI
Outputs supported 4
Inputs supported IP
Maximum output resolutions 3840 × 2160 (DisplayPort)
IP stream support RTSP
Video CODEC engine H.264
H.264 decode ‡
‡ Standard resolutions listed above. Support for custom resolutions available. For specific requirements, contact your Matrox
representative.
two 3840 × 2160 @ 60 Hz, four 3840 × 2160 @ 30 Hz,
eight 1920 × 1080 @ 60 Hz, sixteen 1920 × 1080 @ 30 Hz,
or numerous SD channels
Maximum card dimensions L: 9.02 in / W: 0.75 in / H: 4.376 in
L: 22.9 cm / W: 1.91 cm / H: 11.1 cm
Certifications Class B: FCC, CE, ACMA, VCCI, ICES, CSA, Korea
Matrox Display Wall – User Guide 57
MURA-IPX-I4EF, MURA-IPX-I4EHF, MURA-IPX-I4DF, MURA-IPX-I4DHF
MURA-IPX-I4EF •
MURA-IPX-I4EHF MURA-IPX-I4DF •
MURA-IPX-I4DHF
Operating systems
supported
Windows® 10 64-bit, Windows® 7 64-bit, Windows® Server® 2012 R2 64-bit,
Windows® Server® 2008 R2, Windows® Embedded Standard 7 64-bit,
Windows® Embedded Enterprise 7 64-bit, Linux®
Card type PCIe ×8 2.0 PCIe ×8 2.0
Form factor ATX ATX
Memory 4 GB 4 GB
Connectors 4× Mini HDMI, 1× 100/1000 Base-T
RJ45 Ethernet Port
4× Mini HDMI, 1× 100/1000 Base-T
RJ45 Ethernet Port
Outputs supported ——
Inputs supported 4× HDMI + IP 4× HDMI + IP
Maximum HDMI input
resolutions
4096 × 2160 @ 60 Hz*,
4096 × 2160 @ 30 Hz,
3840 × 2160 @ 60 Hz*,
3840 × 2160 @ 30 Hz
* In YUV 4:2:0, 12 bits per pixel (8 bits per component).
4096 × 2160 @ 60 Hz*,
4096 × 2160 @ 30 Hz,
3840 × 2160 @ 60 Hz*,
3840 × 2160 @ 30 Hz
IP stream support RTSP RTSP
Video CODEC engine H.264 H.264
H.264 decode †
† Standard resolutions listed above. Support for custom resolutions available. For specific requirements, contact your Matrox
representative.
two 3840 × 2160 @ 60 Hz,
four 3840 × 2160 @ 30 Hz,
eight 1920 × 1080 @ 60 Hz,
sixteen 1920 × 1080 @ 30 Hz,
or numerous SD channels
two 3840 × 2160 @ 60 Hz,
four 3840 × 2160 @ 30 Hz,
eight 1920 × 1080 @ 60 Hz,
sixteen 1920 × 1080 @ 30 Hz,
or numerous SD channels
H.264 encode †
two 3840 × 2160 @ 60Hz,
four 3840 × 2160 @ 30Hz,
eight 1920 × 1080 @ 60Hz,
sixteen 1920 × 1080 @ 30Hz,
or numerous SD IP streams
—
Maximum card
dimensions
L: 9.02 in / W: 0.75 in / H: 4.376 in
L: 22.9 cm / W: 1.91 cm / H: 11.1 cm
Certifications Class B: FCC, CE, ACMA, VCCI,
ICES, CSA, Korea
Class B: FCC, CE, ACMA, VCCI,
ICES, CSA, Korea
58 Matrox Display Wall – User Guide
Mura MPX-4/0, MPX-4/2, MPX-4/4, MPX-SDI
Mura MPX-4/0 Mura MPX-4/2 Mura MPX-4/4 Mura MPX-SDI
Operating systems
supported
Windows® Embedded Standard 7 (64-bit), Windows® 7 Professional (64-bit),
Windows® 7 Professional for Embedded Systems (64-bit),
Windows® Server® 2008 R2 (64-bit)
Card type PCIe ×16 2.0 PCIe ×16 2.0 PCIe ×16 2.0 PCIe ×16 1.0
Form factor ATX ATX ATX ATX
Memory 2 GB 2 GB 2 GB 1 GB
Output formats
supported DVI, RGB/VGA DVI, RGB/VGA DVI, RGB/VGA DVI, RGB/VGA
Input formats
supported —
DVI, RGB/VGA,
Component,
S-video,
Composite
DVI, RGB/VGA,
Component,
S-video,
Composite
SMPTE 259M,
SMPTE 292M,
SMPTE 296M,
SMPTE 424M,
SMPTE 425M
HDCP compliant*
* Certain limitations may apply. Matrox strongly recommends that you review the HDCP web site (www.digital-cp.com) and
make sure you understand your legal obligations and responsibility.
9999
Connectors 1× KX20 2× KX20 2× KX20 1× KX20,
2× DIN 1.0/2.3
Outputs supported 4442
Inputs supported 0242
Maximum output
resolutions
2048 × 1152 (DVI),
2048 × 1536
(RGB/VGA)
2048 × 1152 (DVI),
2048 × 1536 (RGB/VGA) 1920 × 1080
Maximum input
resolutions —
2560 × 1600† (DVI),
2048 × 1536‡ (RGB/VGA),
1920 × 1080 (Component)
† At 30 Hz. For specific requirements, contact Matrox.
‡ At 47 Hz. For specific requirements, contact Matrox.
1920 × 1080
Maximum card
dimensions
L: 9.50 in / W: 0.75
in / H: 4.407 in
L: 24.13 cm / W:
1.91 cm / H: 11.2
cm
L: 9.50 in / W: 0.75
in / H: 4.407 in
L: 24.13 cm / W:
1.91 cm / H: 11.2
cm
L: 9.50 in / W: 0.75
in / H: 4.407 in
L: 24.13 cm / W:
1.91 cm / H: 11.2
cm
L: 6.60 in / W: 0.75
in / H: 4.407 in
L: 16.80 cm / W:
1.91 cm / H: 11.2
cm
Certifications Class A: FCC, CE, ACMA, VCCI, ICES, CSA, Korea
Matrox Display Wall – User Guide 59
Mura MPX-V8, MPX-V16
Mura MPX-V8 Mura MPX-V16
Operating systems
supported
Windows® Embedded Standard 7 (64-bit), Windows® 7 Professional (64-bit),
Windows® 7 Professional for Embedded Systems (64-bit),
Windows® Server® 2008 R2 (64-bit)
Card type PCIe ×4 1.0 PCIe ×4 1.0
Form factor ATX ATX
Memory 128 MB DDR SDRAM 256 MB DDR SDRAM
Input formats
supported S-video, Composite S-video, Composite
Connectors 1× DVI-I 2× DVI-I
Outputs supported ——
Inputs supported 816
Maximum input
resolution NTSC/PAL/SECAM NTSC/PAL/SECAM
Maximum card
dimensions
L: 8.10 in / W: 0.75 in / H: 4.376 in
L: 20.6 cm / W: 1.91 cm / H: 11.1 cm
Certifications Class A: FCC, CE, ACMA, VCCI, ICES, CSA, Korea
60 Matrox Display Wall – User Guide
C900, C680
Matrox C900 Matrox C680
Operating systems
supported
Windows® 10, Windows® Server® 2012 R2,
Windows®Server®2008 R2, Windows® 7, Windows® Embedded
Standard 7, and Linux®
GPU AMD™
Audio output formats Multi-stream audio through HDMI Multi-stream audio through
DisplayPort
Digital monitor support*
* C680 only – DVI and HDMI monitors are supported using identical third-party active adapters (sold separately).
DVI, HDMI DisplayPort, DVI, HDMI
Memory 4 GB GDDR 5 4 GB GDDR 5†
† C680 only – The C680-E4GBF SKU has 4 GB of memory. The C680-E2GBF SKU has 2 GB of memory.
Card type PCIe ×16 PCIe ×16
Form factor Full height Full height
Monitors supported 96
Connectors 9× Mini HDMI 6× Mini DisplayPort
Maximum resolution 1920 × 1200 @ 60 Hz
(HDMI, DVI)
4096 × 2160 @ 30 Hz (DisplayPort)
4096 × 2160 @ 60 Hz (DisplayPort,
Max. 3 monitors)
3840 × 2160 @ 30 Hz (DisplayPort,
HDMI)
HDCP compliant‡
‡ Certain limitations may apply. Matrox strongly recommends that you review the HDCP web site (www.digital-cp.com) and
make sure you understand your legal obligations and responsibility.
99
Framelock 99
Maximum card dimensions
L: 9.02 in / W: 0.75 in /
H: 4.376 in
L: 22.91 cm / W: 1.91 cm /
H: 11.115 cm
L: 6.60 in / W: 0.75 in /
H: 4.045 in
L: 16.76 cm / W: 1.91 cm /
H: 10.274 cm
Certifications Class A: FCC, CE, ACMA, VCCI,
ICES, CSA, Korea
Class B: FCC, CE, ACMA, VCCI,
ICES, CSA, Korea
Matrox Display Wall – User Guide 61
Additional specifications – Matrox consoles
M9120 PCIe M9120 Plus LP
PCIe M9125 PCIe M9140 LP PCIe
Operating systems
supported Windows® 10, Windows® Server® 2012 R2, Windows®Server®2008 R2,
Windows® 7, Windows® Embedded Standard 7, and Linux®
Digital monitor
support DVI DVI Dual-link DVI DVI
Memory 512 MB 512 MB 512 MB 512 MB
Card type PCIe ×16 PCIe ×1 or ×16 PCIe ×16 PCIe ×16
Form factor ATXLow-profileATXLow-profile
Monitors supported 22
*
* Quad analog display upgrade kit available (see shopmatrox.com).
24
Connectors 2× DVI 1× LFH-60 2× DVI 1× KX20
Maximum analog
resolution 2048 × 1536 2048 × 1536 2048 × 1536 1920 × 1200
Maximum digital
resolution 1920 × 1200 1920 × 1200
Up to
1920 × 1200,
and
2560 × 1600
1920 × 1200
Maximum card
dimensions
L: 6.600 in / H: 4.376
in / W: 0.750 in
L:16.80 cm / H: 11.10
cm / W: 1.91 cm
L: 6.600 in / H: 2.712
in / W: 0.750 in
L: 16.80 cm / H: 6.90
cm / W: 1.91 cm
L: 6.600 in / H: 4.376
in / W: 0.750 in
L: 16.80 cm / H: 11.10
cm / W: 1.91 cm
L: 6.600 in / H: 2.712
in / W: 0.750 in
L: 16.80 cm / H: 6.90
cm / W: 1.91 cm
Certifications Class B: FCC, CE, ACMA, VCCI, ICES, CSA, Korea
62 Matrox Display Wall – User Guide
M9128 LP PCIe M9138 LP PCIe M9148 LP PCIe
Operating systems
supported Windows® 10, Windows® Server® 2012 R2, Windows®Server®2008 R2,
Windows® 7, Windows® Embedded Standard 7, and Linux®
Digital monitor
support DisplayPort, DVI DisplayPort, DVI DisplayPort, DVI
Memory 1 GB 1 GB 1 GB
Card type PCIe ×16 PCIe ×16 PCIe ×16
Form factor Low-profile Low-profile Low-profile
Monitors supported 234
Connectors 2× DisplayPort 3× Mini DisplayPort 4× Mini DisplayPort
Maximum resolution
2560 × 1600 @ 60 Hz
(DisplayPort)
1920 × 1200 @ 60 Hz
(DVI)
2560 × 1600 @ 60 Hz
(DisplayPort)
1920 × 1200 @ 60 Hz
(DVI)
2560 × 1600 @ 60 Hz
(DisplayPort)
1920 × 1200 @ 60 Hz
(DVI)
Maximum card
dimensions
L: 6.600 in / H: 2.712 in / W: 0.750 in
L: 16.80 cm / H: 6.90 cm / W: 1.91 cm
Certifications Class B: FCC, CE, ACMA, VCCI, ICES, CSA, Korea
P690 PCIe ×16 P690 Plus LP
PCIe ×16
Operating systems
supported
Windows® Embedded Standard 7 (64-bit), Windows® 7 Professional
(64-bit), Windows® 7 Professional for Embedded Systems (64-bit),
Windows® Server® 2008 R2 (64-bit)
Digital monitor support DVI DVI
Memory 128 MB 256 MB
Card type PCIe ×16 PCIe ×16
Form factor Full height Low-profile
Monitors supported 22 DVI / 4 HD-15
Connectors 2× DVI 1× LFH-60
Maximum resolution 1920 × 1200 @ 60 Hz (DVI)
2048 × 1536 @ 60 Hz (HD-15)
1920 × 1200 @ 60 Hz
(DVI, 4× HD-15))
2048 × 1536 @ 60 Hz (2× HD-15)
Maximum card dimensions
L: 6.6 in / H: 4.376 in /
W: 0.75 in
L: 16.76 cm / H: 11.12 cm /
W: 1.91 cm
L: 6.6 in / H: 2.712 in /
W: 0.75 in
L: 16.76 cm / H: 6.89 cm /
W: 1.91 cm
Certifications Class B: FCC, CE, ACMA, VCCI,
ICES, CSA, Korea
Class B: FCC, CE, ACMA, VCCI,
ICES, CSA, Korea
Matrox Display Wall – User Guide 63
Environmental
Mean Time Before Failure (MTBF)
Temperature, operational
Mura MPX Series: 0 to 40 ºC (32 to 104 ºF)
Mura IPX Series: 0 to 45 ºC (32 to 113 ºF)
C-Series: 5 to 55 ºC (41 to 131 ºF) (near board ambient)
Temperature, non-operational
storage and transportation
Mura IPX and MPX Series: -40 to 65 ºC (-40 to 149 ºF)
C-Series: -40 to 70ºC (-40 to 158 ºF)
Humidity, operational (indoor) 20 to 80% (non-condensing)
Humidity, non-operational storage
and transportation 10% to 95% (non-condensing)
Atmospheric pressure, operational 650hPa (3,580 meters / 11,745 feet)
to 1013hPa (0 meters / 0 feet)
Atmospheric pressure,
non-operational and transportation 192hPa (12,000 meters / 39,370 feet)
to 1020hPa (-50 meters / -164 feet)
MTBF*
* Calculated at operating temperature of 40 ºC, operating 24 hours/day. For more information, contact your Matrox
representative.
MURA-IPX-O4DF 7.09 years or 62,149 hours
MURA-IPX-I4EHF 79.19 years or 693,669 hours
MURA-IPX-I4EF 7.26 years or 63,598 hours
MURA-IPX-I4DHF 79.19 years or 693,669 hours
MURA-IPX-I4DF 7.26 years or 63,598 hours
Mura MPX-4/4 †
† Applies to MPX fanless SKUs only.
71.11 years or 622,944 hours
Mura MPX-4/2 †75.41 years or 660,615 hours
Mura MPX-4/0 †90.03 years or 788,631 hours
Mura MPX-V16 †89.48 years or 783,822 hours
Mura MPX-V8 †142.26 years or 1,246,230 hours
Mura MPX-SDI †102.33 years or 896,427 hours
64 Matrox Display Wall – User Guide
Notes
The display resolutions and refresh rates available depend on your Matrox card, driver,
software monitor settings, and monitor. For information on the capabilities of your
monitor, see your monitor documentation.
Matrox Display Wall – User Guide 65
Appendix A – Firewall requirements
The following are the firewall requirements for your display wall system and for a network when using
Network API, MuraControl, or a Mura IPX Series product.
Network API and MuraControl
The following are the firewall requirements when using Network API or MuraControl through the
network to configure your display wall controller.
Display wall system
The following are the requirements for a network firewall present on a network with a Mura IPX
Series product.
Network ports Type Inbound Outbound Functionality
23 TCP 99Telnet: Telnet commands
46272 TCP 99HTTPS: Authentication
Network ports Type Inbound Outbound Functionality
69 UDP — 9DHCP: DHCP client
123 UDP 99NTP: Network Time Protocol
161 UDP 99
SNMP: Network management – public
community string
1900 UDP 99
UPnP: Microsoft SSDP for discovery of
UPnP devices
554, 8554*
* Default ports. Actual ports may vary.
TCP 99RTSP: Streaming (configurable)
16000+ UDP 99
RTP/RTCP: Audio and video streams
and control
66 Matrox Display Wall – User Guide
Matrox IPX Updater
The following are the firewall requirements for a system running the network version of the Matrox
IPX Updater.
Accessing your Windows Firewall settings
To access your Windows Firewall settings:
Windows 10/7
–
1
Windows 10
– Click
Start
Æ
Settings
Æ
Network & Internet
Æ
Ethernet
Æ
Windows
Firewall
.
Windows 7
– Click
Control Panel
Æ
Network and Internet
*
Æ
Network and Sharing
Center
*. (* Depending on your configuration, these steps may be unnecessary.)
2
Windows 10
– In the left panel, click
Advanced Settings
.
Windows 7
– In the left panel, click
Windows Firewall
Æ
Advanced Settings
.
Network Port Type Inbound Outbound Functionality
20,21 TCP — 9FTP: File upload
22*
* Minimum requirements.
TCP 99SSH: Firmware update
443*TCP — 9HTTPS: Authentication
1900*UDP 99
UPnP: Microsoft SSDP for discovery of
UPnP devices
Note:
You may need administrator rights to modify your Windows Firewall settings. For
more information, see Windows documentation or contact your system administrator.
Matrox Display Wall – User Guide 67
Appendix B – Adding a console display
With a console display, you can run applications to manage the layout of the display wall locally
without affecting the appearance of your display wall.
Supported hardware
Matrox P690 PCIe ×16
Connection overview
Supported console More information
Mura MPX Series
P690 PCIe ×16 See page 67.
P690 Plus LP PCIe ×16 (dual-
monitor cable) See page 68.
P690 Plus LP PCIe ×16 (quad-
monitor cable) See page 70.
C900, C680
M9120, M9125 PCIe ×16 See page 71.
M9120 Plus LP PCIe ×1 / ×16 See page 72.
M9140 LP PCIe ×16 See page 73.
M9128 LP PCIe ×16 See page 74.
M9138 LP PCIe ×16, M9148 LP
PCIe ×16 See page 75.
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
DVI to HD-15
adapter
68 Matrox Display Wall – User Guide
Description of supported connections
The following describes the connections supported by your P690 graphics card.
Matrox P690 Plus LP PCIe ×16 (dual-monitor cable)
Connection overview
Device connector Description
DVI If your monitor has a DVI connector, connect your monitor cable
directly to a DVI connector on your Matrox card.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to
your Matrox card.
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
DVI to HD-15
adapter
Output cable
(LFH-60 to Dual-DVI)
Matrox Display Wall – User Guide 69
Description of cable
Description of supported connections
Cable Description
Output Matrox P690 cards use an LFH-60 to
dual-DVI cable to connect up to
two (2) monitors per card. Monitors
are numbered consecutively based
on which connector each is attached
to, starting with connector labeled 1.
Device connector Description
DVI If your monitor has a DVI connector, connect your monitor cable
directly to a DVI connector on your output cable.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to
your output cable.
LFH-60 to dual-DVI cable
70 Matrox Display Wall – User Guide
Matrox P690 Plus LP PCIe ×16 (quad-monitor cable)
Connection overview
Description of cable
Cable Description
Output Matrox P690 cards use an LFH-60 to
quad-HD15 cable to connect up to
four (4) monitors per card. Monitors
are numbered consecutively based
on which connector each is attached
to, starting with connector labeled 1.
Monitor
connector
(DVI)
Monitor
connector
(HD-15)
HD-15 to DVI
adapter
Output cable
(LFH-60 to Quad-DVI)
LFH-60 to quad-HD-15 cable
Matrox Display Wall – User Guide 71
Description of supported connections
Matrox M9120 and M9125 PCIe ×16
Connection overview
Description of supported connections
Device connector Description
HD-15 If your monitor uses an HD-15 connector, connect it directly to your
quad-monitor cable.
DVI If your monitor uses a DVI connector and supports analog input, you
need an HD15-to-DVI adapter (sold separately). Some monitors with
DVI connectors support both digital and analog input. If you’re using
one of these monitors with your Matrox product, make sure it’s
configured to use analog input. For more information, see your
monitor documentation.
Device connector Description
DVI If your monitor has a DVI connector, connect your monitor cable
directly to a DVI connector on your Matrox card.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to
your Matrox card.
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
DVI to HD-15
adapter
72 Matrox Display Wall – User Guide
Matrox M9120 Plus LP PCIe ×1 / ×16
Connection overview
Description of cable
Cable Description
Output M9120 Plus LP cards use an LFH-60
to dual-DVI cable to connect up to
two (2) monitors per card. Monitors
are numbered consecutively based
on which connector each is attached
to, starting with connector labeled 1.
Monitor
connector
(HD-15)
Monitor
connector
(DVI)
DVI to HD-15
adapter
Output cable
(LFH-60 to Dual-DVI)
LFH-60 to dual-DVI cable
Matrox Display Wall – User Guide 73
Description of supported connections
Matrox M9140 LP PCIe ×16
Connection overview
Device connector Description
DVI If your monitor has a DVI connector, connect your monitor cable
directly to a DVI connector on your output cable.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to
your output cable.
Output cable
(KX20 to Quad-DVI)
Monitor
connector
(HD-15)
DVI to HD-15
adapter
Monitor
connector
(DVI)
74 Matrox Display Wall – User Guide
Description of cables
Description of supported connections
Matrox M9128 LP PCIe ×16
Connection overview
Cable Description
Output M9140 cards use KX20 to quad-DVI cables
to connect up to four (4) monitors per card.
Monitors are numbered consecutively
based on which connector each is attached
to, starting with connector labeled 1.
Device
connector Description
DVI If your monitor has a DVI connector, connect your monitor cable directly to
a DVI connector on your output cable.
HD-15 If your monitor has an HD-15 connector, use a DVI to HD-15 adapter
included with your Mura product to connect your monitor cable to your
output cable.
WAR NING:
To avoid damaging the
DisplayPort connector on your DisplayPort
monitor cable or on your graphics
hardware, carefully remove the DisplayPort
cable by pressing the latch on the top of the
DisplayPort connector while removing the
connector.
KX20 to quad-DVI cable
Monitor connector
(DisplayPort
Matrox Display Wall – User Guide 75
Description of supported connections
Matrox M9138 LP PCIe ×16 and M9148 LP PCIe ×16
Connection overview
Device connector Description
DisplayPort If your monitor has a DisplayPort connector, attach your monitor
cable to the DisplayPort connector on your Matrox card. Connect the
other end of the cable to your monitor.
DVI If your monitor has a DVI connector, use a DisplayPort to DVI adapter
(active) to connect your monitor cable to the DisplayPort connector
on your Matrox card. Connect the other end of the cable to your
monitor.
WAR NING:
To avoid damaging the
DisplayPort connector on your DisplayPort
monitor cable or on your graphics
hardware, carefully remove the DisplayPort
cable by pressing the latch on the top of the
DisplayPort connector while removing the
connector.
Mini DisplayPort to
DisplayPort adapter
Monitor connector
(DisplayPort)
(M9138 shown)
76 Matrox Display Wall – User Guide
Description of supported connections
Device connector Description
DisplayPort If your monitor has a DisplayPort connector, attach your mini
DisplayPort to DisplayPort cable to your Matrox card. Connect the
other end of the cable to your monitor.
DVI If your monitor has a DVI connector, use a mini DisplayPort to DVI-D
adapter (active) to connect your monitor cable to the mini DisplayPort
connector on your output cable. Connect the other end of the cable
to your monitor.
Matrox Display Wall – User Guide 77
Appendix C – Matrox secure cable
solution
Mini HDMI® – MURA-IPX-I4EF • MURA-IPX-I4EHF •
MURA-IPX-I4DF • MURA-IPX-I4DHF
1
78 Matrox Display Wall – User Guide
2
3
Matrox Display Wall – User Guide 79
Customer support
Matrox Web
Our Web site has product literature, press releases, technical material, a sales office list, trade show
information, and other relevant material. Visit the Matrox Graphics Web site at
www.matrox.com/graphics.
Technical support
Matrox values your business and offers professional support for your Matrox product. If you have a
problem, we recommend you follow the procedure below for the quickest results.
1
Contact your integrator
– This is usually the quickest and most effective method of
technical assistance. Your integrator is familiar with your complete system. In the case of
hardware warranty assistance, the product must be returned to the integrator, who will
return it to Matrox.
2
If your Matrox product was provided by your computer manufacturer, contact this
manufacturer. For contact information, see your computer documentation or contact
the vendor.
3
Direct Matrox technical support
– If you still can’t resolve a problem (and your Matrox
product wasn’t provided by your computer manufacturer), you can get technical
assistance by contacting Matrox technical support at dwcsupport@matrox.com.
Information we need
Please give a complete description of the problem, and include:
Matrox card serial number, model number, revision number, BIOS number, driver type
and version, and memory address at which the Matrox card is installed.
Computer brand and model name.
Monitor brand and model name.
Operating system, version, and service pack.
Brand and model of any other cards and devices installed on your system.
80 Matrox Display Wall – User Guide
Program specific problems
If a problem appears with a specific program, please give us the following information:
Display settings (color palette, display resolution, and so on) applied when the problem
occurs.
If possible, take note of the file and segment address that caused the problem.
Detailed steps known to cause the bug, so we can reproduce it.
Driver and software download
From your integrator or manufacturer
– If your product was purchased through an integrator or a
manufacturer, contact them for the latest display driver, software, and system utilities as they’re
familiar with your complete system. An integrator or a manufacturer may also have directives
regarding software updates.
Directly from Matrox
– A more recent display driver may support more features and may offer
increased capabilities (such as higher display resolutions). Matrox makes the latest display drivers,
software, and system utilities available on the Matrox Technical Support Web site
(www.matrox.com/graphics/en/support/drivers).
View your warranty information
Matrox makes warranty information available on the Matrox site
(www.matrox.com/graphics/en/about/warranty).
Third party software notices and/or additional terms and
conditions
Matrox makes information about any open-source packages used for your product available on the
Matrox site (thirdpartylicenses.matrox.com).
Register your Matrox product
Please register online (www.matrox.com/graphics/en/registration) to receive new product
announcements and information on special offers and upcoming events.
Hot surface Allow hot surfaces to cool before touching your Matrox unit.
Surface chaude Laissez refroidir les surfaces chaudes avant de toucher votre appareil Matrox.
Battery replacement The battery is non replaceable. To dispose of your product, see
www.matrox.com/environment/weee.
Remplacement des piles La pile n’est pas remplaçable. Pour se défaire du produit, voir
www.matrox.com/environment/weee.
USA
FCC Compliance Statement
Remark for the Matrox hardware products supported by this guide This equipment has been tested
and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between
the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected • Consult the dealer or an experienced radio/TV technician for help.
WARNING Changes or modifications to this unit not expressly approved by the party responsible for the compliance
could void the user’s authority to operate this equipment.
Declaration of conformity of a Class B digital device according to the FCC rules
We, the Responsible Party Matrox, 2002 Ridge Road, Champlain, NY 12919 • Telephone: (514) 822-6000 (extension
2026) • Attention: Conformity Group Matrox
Declaration The Matrox hardware products supported by this guide comply with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) these devices may not cause harmful interference, and (2) these devices
must accept any interference received, including interference that may cause undesired operation. Any question
regarding this declaration should be forwarded to the above coordinates.
CANADA
(English) Industry Canada Compliance Statement
Remark for the Matrox hardware products supported by this guide These digital devices do not exceed the Class
B limits for radio noise emission from digital devices set out in the Radio Interference Regulation of Industry Canada.
(Français) Conformité avec les exigences du ministère de l’Industrie Canada
Remarque sur les produits matériels Matrox couverts par ce guide Ces appareils numériques n’émettent aucun
bruit radioélectrique dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le
Règlement sur le brouillage radioélectrique édicté par Industrie Canada.
USA
FCC Compliance Statement
Remark for the Matrox hardware products supported by this guide This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
WARNING Changes or modifications to this unit not expressly approved by the party responsible for the compliance
could void the user’s authority to operate this equipment. The use of shielded cables for connection of the monitor to
the card is required to meet FCC requirements.
CANADA
(English) Industry Canada Compliance Statement
Remark for the Matrox hardware products supported by this guide These digital apparatus does not exceed the
Class A limits for radio noise emission from digital devices set out in the Radio Interference Regulation of Industry
Canada.
(Français) Conformité avec les exigences du ministère de l’Industrie Canada
Remarque sur les produits matériels Matrox couverts par ce guide Ce present appareil numérique n’émet aucun
bruit radioélectrique dépassant les limites applicables aux appareils numériques de Classe A prescrites dans le
Règlement sur le brouillage radioélectrique édicté par Industrie Canada.
JAPAN
VCCI Compliance Statement
Remark for the Matrox hardware products supported by this guide This is a Class B product based on
the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI).
If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and
use the equipment according to the instruction manual.
JAPAN
VCCI Compliance Statement
Remark for the Matrox hardware products supported by this guide This is a Class A product based on the
standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment
is used in a domestic environment, radio disturbance may occur, in which case, the user may be required to take
corrective actions.
KOREA
B급 기기 ( 가정용 방송통신기자재 )
이 기기는 가정용 (B 급 ) 전자파적합기기로서 주 로 가정에서 사용하는 것을 목적으로 하며 ,
모든 지역에서 사용할 수 있습니다 .
KOREA
A 급 기기 ( 업무용 방송통신기자재 )
이 기기는 업무용 (A 급 ) 전자파적합기기로서 판 매자 또는 사용자는 이 점을 주의하시기 바
라 며 , 가정외의 지역에서 사용하는 것을 목적으 로 합니다 .
EUROPE
(English) European user’s information – Information on Conformity
Remark for the Matrox hardware products supported by this guide These devices comply with EC
Directive 2014/30/EU for a Class B digital device. They have been tested and found to comply with
EN55022/CISPR22 and EN55024/CISPR24. In a domestic environment these products may cause radio interference in
which case the user may be required to take adequate measures. These products have been tested in a typical class B
compliant host system. It is assumed that these products will also achieve compliance in any class B compliant system.
(Français) Informations aux utilisateurs Européens – Informations sur la conformité
Remarque sur les produits matériels Matrox couverts par ce guide Ces unités sont conformes à la directive
communautaire 2014/30/EU pour les unités numériques de classe B. Les tests effectués ont prouvé qu’elles sont
conformes aux normes EN55022/CISPR22 et EN55024/CISPR24. Le fonctionnement de ces produits dans un
environnement résidentiel peut causer des interférences radio, dans ce cas l’utilisateur peut être amené à prendre les
mesures appropriées. Ces produits ont été testés dans un système hôte typique compatible classe B. On suppose qu’ils
présenteront la même compatibilité dans tout système compatible classe B.
(Deutsch) Information für europäische Anwender – Konformitäts-Informationen
Anmerkung für die Matrox Hardware-Produktunterstützung durch dieses Handbuch Diese Geräte entsprechen
EC Direktive 2014/30/EU für ein digitales Gerät Klasse B. Sie wurden getestet und entsprechen demnach
EN55022/CISPR22 und EN55024/CISPR24. In einer Wohnumgebung können diese Produkte Funkinterferenzen
erzeugen, und der Benutzer kann genötigt sein, entsprechende Maßnahmen zu ergreifen. Diese Produkt wurden in
einem typischen, der Klasse B entsprechenden, Host-System getestet. Es wird davon ausgegangen, daß diese Produkte
auch in jedem Klasse B entsprechenden System entsprechend funktionieren.
(Italiano) Informazioni per gli utenti europei – Informazioni sulla conformità
Nota per i prodotti hardware Matrox supportati da questa guida Questi dispositivi sono conformi alla direttiva
CEE 2014/30/EU relativamente ai dispositivi digitali di Classe B. Sono stati provati e sono risultati conformi alle norme
EN55022/CISPR22 e EN55024/CISPR24. In un ambiente domestico, questi prodotti possono causare radiointerferenze,
nel qual caso all’utente potrebbe venire richiesto di prendere le misure adeguate. Questi prodotti sono stati provati in un
tipico sistema host conforme alla classe B. Inoltre, si dà per scontato che questi prodotti acquisiranno la conformità in
qualsiasi sistema conforme alla classe B.
(Español) Información para usuarios europeos – Información sobre la conformidad
Observación referente a los productos de hardware de Matrox apoyados por este manual Estos dispositivos
cumplen con la directiva de la CE 2014/30/EU para dispositivos digitales de Clase B. Dichos dispositivos han sido
sometidos a prueba y se ha comprobado que cumplen con las normas EN55022/CISPR22 y EN55024/CISPR24. En
entornos residenciales, estos productos pueden causar interferencias en las comunicaciones por radio; en tal caso el
usuario deberá adoptar las medidas adecuadas. Se supone que estos productos cumplirán también con las normas en
cualquier sistema que responda a los requisitos de la clase B.
EUROPE
(English) European user’s information – Declaration of Conformity
Remark for the Matrox hardware products supported by this guide These devices comply with EC
Directive 2014/30/EU for a Class A digital device. They have been tested and found to comply with
EN55022/CISPR22 and EN55024/CISPR24. In a domestic environment these products may cause radio interference in
which case the user may be required to take adequate measures. To meet EC requirements, shielded cables must be
used to connect the monitor and other peripherals to the card. These products have been tested in a typical class A
compliant host system. It is assumed that these products will also achieve compliance in any class A compliant system.
(Français) Informations aux utilisateurs Européens – Déclaration de conformité
Remarque sur les produits matériels Matrox couverts par ce guide Ces unités sont conformes à la directive
communautaire 2014/30/EU pour les unités numériques de classe A. Les tests effectués ont prouvé qu’elles sont
conformes aux normes EN55022/CISPR22 et EN55024/CISPR24. Le fonctionnement de ces produits dans un
environnement résidentiel peut causer des interférences radio, dans ce cas l’utilisateur peut être amené à prendre les
mesures appropriées. Pour respecter les impératifs communautaires, les câbles de connexion entre le moniteur ou
autres périphériques et la carte doivent être blindés. Ces produits ont été testés dans un système hôte typique
compatible classe A. On suppose qu’ils présenteront la même compatibilité dans tout système compatible classe A.
(Deutsch) Information für europäische Anwender – Konformitätserklärung
Anmerkung für die Matrox Hardware-Produktunterstützung durch dieses Handbuch Diese Geräte entsprechen
EC Direktive 2014/30/EU für ein digitales Gerät Klasse A. Sie wurden getestet und entsprechen demnach
EN55022/CISPR22 und EN55024/CISPR24. In einer Wohnumgebung können diese Produkte Funkinterferenzen
erzeugen, und der Benutzer kann genötigt sein, entsprechende Maßnahmen zu ergreifen. Um EG-Anforderungen zu
entsprechen, müssen zum Anschließen des Monitors und anderer Peripheriegeräte an die Karte abgeschirmte Kabel
verwendet werden. Diese Produkt wurden in einem typischen, der Klasse A entsprechenden, Host-System getestet. Es
wird davon ausgegangen, daß diese Produkte auch in jedem Klasse A entsprechenden System entsprechend
funktionieren.
(Italiano) Informazioni per gli utenti europei – Dichiarazione di conformità
Nota per i prodotti hardware Matrox supportati da questa guida Questi dispositivi sono conformi alla direttiva
CEE 2014/30/EU elativamente ai dispositivi digitali di Classe A. Sono stati provati e sono risultati conformi alle norme
EN55022/CISPR22 e EN55024/CISPR24. In un ambiente domestico, questi prodotti possono causare radiointerferenze,
nel qual caso all’utente potrebbe venire richiesto di prendere le misure adeguate. Per soddisfare i requisiti CEE, il monitor
e le altre periferiche vanno collegati alla scheda grafica con cavi schermati. Questi prodotti sono stati provati in un tipico
sistema host conforme alla classe A. Inoltre, si dà per scontato che questi prodotti acquisiranno la conformità in qualsiasi
sistema conforme alla classe A.
(Español) Información para usuarios europeos – Declaración de conformidad
Observación referente a los productos de hardware de Matrox apoyados por este manual Estos dispositivos
cumplen con la directiva de la CE 2014/30/EU para dispositivos digitales de Clase A. Dichos dispositivos han sido
sometidos a prueba y se ha comprobado que cumplen con las normas EN55022/CISPR22 y EN55024/CISPR24. En
entornos residenciales, estos productos pueden causar interferencias en las comunicaciones por radio; en tal caso el
usuario deberá adoptar las medidas adecuadas. Para satisfacer las disposiciones de la CE, deberán utilizarse cables
apantallados para conectar el monitor y demás periféricos a la tarjeta. Estos productos han sido sometidos a prueba en
un típico sistema anfitrión que responde a los requisitos de la clase A. Se supone que estos productos cumplirán
también con las normas en cualquier sistema que responda a los requisitos de la clase A.
ROVI CORPORATION
(English) This item incorporates copy protection technology that is protected by U.S. patent(s) and other intellectual
property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
(Français) Ce produit intègre une technologie de protection des droits d’auteur qui est protégée par un ou plusieurs
brevets américains et par d’autres droits de propriété intellectuelle de Rovi Corporation. L’ingénierie inverse et le
désassemblage sont interdits.
(Deutsch) Dieses Produkt enthält Kopierschutztechnologien, die durch US-Patent(e) und andere Rechte am geistigen
Eigentum der Rovi Corporation geschützt ist. Reverse Engineering und Demontage sind verboten.
(Italiano) Questo prodotto incorpora la tecnologia di protezione di copia protetta da uno o più brevetti USA e da altri
diritti di proprietà intellettuale di Rovi Corporation. È vietato decodificare o disassemblare il prodotto.
(Español) Este producto incorpora tecnología de protección de copia que está protegida por patente(s) de EE. UU. y
por otros derechos de propiedad intelectual de Rovi Corporation. La ingeniería inversa y el desmontaje están prohibidos.
EUROPE
(English) European user’s information – Directive on Waste Electrical and
Electronic Equipment (WEEE)
Please refer to the Matrox Web site (www.matrox.com/environment/en/weee) for recycling information.
(Français) Informations aux utilisateurs Européens – Règlementation des
déchets d’équipements électriques et électroniques (DEEE)
Se référer au site Web de Matrox (www.matrox.com/environment/en/weee) pour l’information concernant le recyclage.
(Deutsch) Information für europäische Anwender – Europäische Regelungen zu Elektro-
und Elektronikaltgeräten (WEEE)
Bitte wenden Sie sich an der Matrox-Website (www.matrox.com/environment/en/weee) für Recycling-Informationen.
(Italiano) Informazioni per gli utenti europei – Direttiva sui rifiuti di apparecchiature
elettriche ed elettroniche (RAEE)
Si prega di riferirsi al sito Web Matrox (www.matrox.com/environment/en/weee) per le informazioni di riciclaggio.
FRANCE
Avertissement sur l’épilepsie
À lire avant toute utilisation d’un jeu vidéo par vous-même ou votre enfant Certaines personnes sont
susceptibles de faire des crises d’épilepsie ou d’avoir des pertes de conscience à la vue de certains types de lumières
clignotantes ou d’éléments fréquents dans notre environnement quotidien. Ces personnes s’exposent à des crises
lorsqu’elles regardent certaines images télévisées ou qu’elles jouent à certains jeux vidéo. Ces phénomènes peuvent
apparaître alors même que le sujet n’a pas d’antécédent médical ou n’a jamais été confronté à une crise d’épilepsie.
Si vous-même ou un membre de votre famille avez déjà présenté des symptômes liés à l’épilepsie (crise ou perte de
conscience) en présence de stimulations lumineuses, veuillez consulter votre médecin avant toute utilisation.
Nous conseillons aux parents d’être attentifs à leurs enfants lorsqu’ils jouent avec des jeux vidéo. Si vous-même ou votre
enfant présentez un des symptômes suivants: vertige, trouble de la vision, contraction des yeux ou des muscles, perte
de conscience, trouble de l’orientation, mouvement involontaire ou convulsion, veuillez immédiatement cesser de jouer
et consultez un médecin.
Précautions à prendre dans tous les cas pour l’utilisation d’un jeu vidéo Ne vous tenez pas trop près de l’écran.
• Jouez à bonne distance de l’écran de TV et aussi loin que le permet le cordon de raccordement. • Utilisez de
préférence les jeux de vidéo sur un écran de petite taille. • Évitez de jouer si vous êtes fatigué ou si vous manquez de
sommeil. • Assurez-vous que vous jouez dans une pièce bien éclairée. • En cours d’utilisation, faites des pauses de dix
à quinze minutes toutes les heures.
Copyright © 2017 Matrox Graphics Inc. • (English) All rights reserved. • (Français) Tous droits réservés. • (Deutsch) Alle
Rechte vorbehalten. • (Italiano) Tutti i diritti riservati. • (Español) Reservados todos los derechos.
Trademarks • Marques déposées • Warenzeichen • Marchi registrati •
Marcas registradas
Matrox Electronic Systems Ltd. /
Matrox Graphics Inc. ................................................ Matrox®, DualHead®, ASM™, ATC™, AuroraVX3mp™,
AuroraVX™, Avio™, C-Series™, DualHead2Go™, Epica™,
Equinox™, Extio™, G400™, G450™, G550™, GXM™, Maevex™,
Marvel™, MED2mp™, MED2mp-DVI™, MED3mp-DVI™,
MED4mp™, MED5mp-DVI™, MED5mp™, Millennium™, MMS™,
Multi-Monitor Series™, MultiDesk™, Mura™, MuraControl™,
Mystique™, P650™, P690™, P750™, Parhelia™, Parhelia™ APVe,
Parhelia-512™, Parhelia-LX™, Parhelia HR256™, PJ4OLP™,
QID™, Quad Information Display™, RAD™, Quick Connect™,
MaxVIEW™, Onyx™, PixelTOUCH™, PrecisionCAD™, Precision
SGT™, QuickDesk™, RAD2mp™, RAD3mp™, RAD9mp™,
RADQ2mp™, Rainbow Runner®, TheatreVUE™, TripleHead™,
TripleHead2Go™, VDA™, Veos™, Xenia™
Adobe Systems Inc. ................................................. Acrobat®, Reader®
Advanced Micro Devices, Inc. ................................. AMD®
Apple Computer, Inc. ............................................... App Store®, Apple®, iPad®, Mac®, Mac OS®
Belden Inc. ............................................................... Belden®
Cisco Systems Inc. .................................................. iOS®
Dolby Laboratories, Inc............................................. Dolby®, Dolby Digital®
Intel Corporation ....................................................... Intel®, Pentium®, Thunderbolt™
Linus Torvalds ........................................................... Linux®
Microsoft Corporation............................................... Aero®, Direct3D®, DirectShow®, DirectX®, Microsoft®, MS-DOS®,
PowerPoint®, Windows®, Windows NT®, Windows Server®,
Windows Vista®
PCI-SIG..................................................................... PCI™, PCI-X®, PCIe®, PCI Express®
Radio Corporation of America .................................. RCA®
RealVNC Ltd. ............................................................ VNC®
Rovi Corporation....................................................... Macrovision®
SD-3C, LLC............................................................... SD™, SDHC™, SDXC™
Silicon Graphics, Inc. ................................................ OpenGL®
Silicon Image, Inc...................................................... PanelLink®, TMDS®
U.S. Environmental Protection Agency..................... ENERGY STAR®
Video Electronics Standards Association ................. DisplayPort™
VideoLAN .................................................................. VideoLAN®, VLC®, VLC® media player
Wibu-Systems........................................................... WIBU®
Copyright © 1996-2016 VideoLAN. This logo or a modified version may be used or modified by anyone to refer to the
VideoLAN project or any product developed by the VideoLAN team, but does not indicate endorsement by the project.
HTML5 Logo by World Wide Web Consortium (W3C). This HTML5 logo is licensed under this Public License
(http://www.creativecommons.org/licenses/by/3.0/legalcode). The logo has been modified to meet the resolution and
size required by this application.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.
• (English) Registered trademarks are registered in the United States, Canada, and/or other countries. All other nationally
and internationally recognized trademarks and tradenames are hereby acknowledged. • (Français) Les marques
déposées sont déposées aux États-Unis, au Canada et/ou dans d’autres pays. Toutes les autres marques et tous les
autres noms déposés reconnus nationalement ou internationalement sont également reconnus par les présentes. •
(Deutsch) Die eingetragenen Warenzeichen sind in den USA, Kanada und/oder anderen Ländern registriert. Alle
sonstigen national und international bekannten Warenzeichen und Produktnamen werden hiermit anerkannt. • (Italiano)
I marchi registrati sono registrati negli Stati Uniti, in Canada e/o in altri paesi. Tutti gli altri marchi registrati e nomi
commerciali riconosciuti a livello nazionale e internazionale sono ugualmente riconosciuti qui. • (Español) Las marcas
registradas están registradas en los EE.UU., Canadá u otros países. Por medio del presente se reconocen todas las
demás marcas y nombres comerciales reconocidos a nivel nacional e internacional.
(English) Disclaimer
THE INFORMATION IN THIS GUIDE IS SUBJECT TO CHANGE AT ANY TIME AND WITHOUT NOTICE.
Matrox Graphics Inc. reserves the right to make changes in specifications at any time and without notice. The
information provided by this document is believed to be accurate and reliable at the time it is written. However, no
responsibility is assumed by Matrox Graphics Inc. for its use, for its reproduction and/or distribution, in whole or in part;
nor for any infringements of patents or other rights of third parties resulting from its use.
(Français) Responsabilité
LES INFORMATIONS CONTENUES DANS CE MANUEL PEUVENT ÊTRE MODIFIÉES EN TOUT TEMPS ET CE SANS
PRÉAVIS.
Les Graphiques Matrox Inc. se réserve le droit de modifier les spécifications en tout temps et ce sans préavis
quelconque. Les informations contenues dans ce manuel sont reconnues comme étant précises et fiables à la date de
rédaction. Cependant, Matrox Graphics Inc. n’assume aucune responsabilité concernant leur utilisation, leur
reproduction et/ou distribution, en tout ou en partie, ni leur contrefaçon de brevets ou de tout autre droit appartenant à
des tiers résultant de leur utilisation. Aucune licence n’est accordée sur aucun brevet ou droit d’exploiter un brevet de
Matrox Graphics Inc.
(Deutsch) Haftungsablehnungserklärung
DIE IN DIESEM HANDBUCH ENTHALTENEN ANGABEN UND DATEN KÖNNEN OHNE VORHERIGE ANKÜNDIGUNG
GEÄNDERT WERDEN.
Die Matrox Graphics Inc. behält sich das Recht vor, jederzeit und ohne Ankündigung technische Daten zu ändern. Zum
Zeitpunkt der Erstellung dieses Handbuchs sind die Inhalte korrekt und verlässlich. Weiterhin übernimmt Matrox
Graphics Inc. keinerlei Verantwortung für die Benutzung dieses Handbuchs, die Vervielfältigung und/oder Verteilung im
Ganzen oder zum Teil; weder für Verstöße gegen Patentrechte noch für andere Rechte Dritter, die aus seinem Gebrauch
resultieren mögen. Es werden keinerlei Lizenzrechte gewährt für sämtliche Patente oder Patentrechte der Matrox
Graphics Inc.
(Italiano) Discrezionalità
LE INFORMAZIONI CONTENUTE NEL PRESENTE DOCUMENTO SONO SOGGETTE A MODIFICHE IN QUALUNQUE
MOMENTO E SENZA PREAVVISO.
Matrox Graphics Inc. si riserva il diritto di apportare variazioni di qualunque tipo alle specifiche tecniche in qualunque
momento e senza alcun preavviso. Le informazioni contenute in questa documentazione sono ritenute corrette e
attendibili al momento della pubblicazione. In ogni caso, non è imputabile a Matrox Graphics Inc. nessuna responsabilità
per il loro utilizzo, per la loro distribuzione e/o riproduzione completa o in parte, come nessuna violazione a brevetti o
diritti di altri produttori derivante dal loro utilizzo.
(Español) Renuncia
LA INFORMACION QUE CONTIENE EL PRESENTE MANUAL ESTA SUJETA A CAMBIOS SIN PREVIO AVISO EN
CUALQUIER MOMENTO.
Matrox Graphics Inc. se reserva el derecho de realizar modificaciones en cualquier momento y sin previo aviso. La
información facilitada en este documento se considera que es exacta y fiable hasta la fecha de publicación. Sin
embargo, Matrox Graphics Inc. no asume ninguna responsabilidad por su uso, por su reproducción y/o distribución
parcial o total; ni por cualquier infracción de patentes u otros derechos de terceras partes derivados de su uso. No se
concede ninguna licencia bajo cualesquiera patentes o derechos de patentes de Matrox Graphics Inc.
