MEDION P66015 User Manual
Displayed below is the user manual for P66015 by MEDION which is a product in the PCs/Workstations category. This manual has pages.
Related Manuals
Mini PC
High Performance PC
Multimedia PC
MEDION®
Operating instructions
Important information about the illustrations
PLEASE NOTE!
The overview includes all connections; your device may differ from this
depending on configuration.
Some video connectors are fitted with a protective cover. These connec-
tions are not available in the respective configuration.
ii of xx
MS/SD/MMS/xD
1
3
4
6
8
9
11
12
13
5
9
11
21
22 13
33
24
25
17
20
28
14
27
18
iii of xx
Multimedia PC
P3 Revision 22
1
3
4
6
8
11
12
13
5
9
11
21
22 13
33
24
25
17
20
28
14
27
18
iv of xx
Multimedia PC
F2 Revision 22
MS/SD/MMS/xD
1
3
4
6
8
9
11
12
13
5
9
11
21
22 13
33
24
25
17
20
28
14
27
18
v of xx
Multimedia PC
R9 Revision 22
1
3
4
6
8
9
12 13
9
5
11
21
14
24
15
17
27
18
20
vi of xx
Multimedia PC
M11 Revision 22
1
2
3
4
8
9
11
12
13
9
5
11
21
14
24
15
17
27
18
20
vii of xx
Multimedia PC
M50 Revision 34A
1
3
4
8
9
12
13
9
5
11
21
14
24
15
17
27
18
20
viii of xx
Multimedia PC
M55 Revision 34
1
3
4
89
12
13
9
5
11
21
14
24
15
17
27
18
20
ix of xx
Multimedia PC
M65 Revision 34
1
3
4
6
7
13
9
12
8
5
9
11
21
22 13
33
24
25
17
20
28
14
27
18
x of xx
High-Performance PC
S91 Revision 22
1
3
4
7
8
9
13
9
12
12
17
27
23
9
5
11
10
21
24
13
18
xi of xx
High-Performance PC
X30 Revision 29A
3
4
1
7
5
9
10
14
28
18
36
27
17
20 21
24 23
SD/MS/MMS
8 12 139 11
1
xii of xx
High-Performance PC
X57 Revision 37
1
3
4
7
8
911
12
13
33
5
9
21
33
14
24
25
16
17
18
29
20
11
27
28
xiii of xx
High-Performance PC
X71 Revision 30
1
3
4
7
8
9111213
34
2
5
9
11
21
10
14
24
25
16
17
27
29
20
18
28
xiv of xx
High-Performance PC
X75 Revision 32A
3
4
1
7
35
6
5
20
22
24
9
13
21
17
10
29
11
14
27
18
28
MS/SD/MMS/xD
8 33
1
9 12 13
34
xv of xx
High-Performance PC
X77 Revision 35
1
9 15
19 V
OPTICAL
VGA
59
20 27
18 24
xvi of xx
Mini PC
NUC S13
1
915
19 V
59 24
23 27
xvii of xx
Mini PC
NUC S14
1937
11
512 20
24 27
xviii of xx
Mini PC
LivaX S15
xix of xx
Connections*
1On/off switch/operating mode
2Slot for Medion HDDrive2Go super-speed external hard drive
3Optical drive
4Optical drive eject button
5Power supply (mains cable socket & mains switch)
6Front panel
7Hot-swap mobile rack
8Card reader
9USB 3.0 ports
10 USB 3.1 ports
11 USB 2.0 ports
12 Headphones socket
13 Microphone socket
14 Audio input / Speaker RS (rear out)*
15 Headphones socket / Speaker FS (front out)*
16 Microphone socket / Speaker CC/SS (center/subwoofer out)*
17 Surround (FS, RS, CC, SS)
18 Optical/coaxial digital S/PDIF audio output*
19
20 VGA monitor connection
21 DVI-D monitor connection
22 DVI-I monitor connection
23 Display Port
24 HDMI connection
25 miniDisplayPort
26
* Ports with dual function. Confi guration is set with the included software.
xx of xx
27 LAN network (RJ45)
28 PS/2 connection
29 Clear CMOS
30
31
32
33 eSATA connection
34 Overclocking button
35 Illumination control
36 EJECT button
1 of 46
Table of Content
1. About these operating instructions ........................................................... 3
1.1. Warning symbols and key words used in these operating
instructions .............................................................................................................. 3
1.2. Proper use ................................................................................................................4
1.3. Declaration of conformity .................................................................................. 4
1.4. Information on trademarks ............................................................................... 5
2. Safety information ...................................................................................... 6
2.1. Dangers for children and people with reduced ability to operate
machinery ................................................................................................................ 6
2.2. Operating safety .................................................................................................... 6
2.3. Never carry out repairs yourself .......................................................................8
2.4. Data backup ............................................................................................................8
3. Package contents ......................................................................................... 8
4. Setting up the PC ......................................................................................... 9
4.1. Installation location .............................................................................................. 9
4.2. Environmental requirements ............................................................................ 9
4.3. Ergonomics .............................................................................................................. 9
5. Connecting ................................................................................................. 11
5.1. Connecting the cables ......................................................................................11
5.2. Opening and closing the front cover (optional) ......................................12
5.3. Connecting the monitor (optional) ..............................................................12
5.4. Connecting an HDMI device (optional) .......................................................12
5.5. Touchscreen (optional) .....................................................................................12
5.6. Brightness control (optional) ..........................................................................14
5.7. Source Select / Display off (optional) ...........................................................14
5.8. Connecting PS/2 devices (optional) .............................................................15
5.9. Connecting the audio output / headphones / speaker boxes............16
5.10. Connect microphone (optional) ....................................................................17
5.11. Connecting audio input / recording source ..............................................17
5.12. Connecting the network (LAN) ......................................................................17
5.13. Connecting S-ATA devices (optional) ...........................................................17
5.14. Illumination (optional) ......................................................................................17
5.15. EJECT button.........................................................................................................18
5.16. Connecting power supply ...............................................................................19
6. Starting up for the first time ..................................................................... 20
6.1. Starting up your PC ............................................................................................20
6.2. Overclocking button (optional) .....................................................................22
7. Mouse ......................................................................................................... 24
7.1. Left button .............................................................................................................24
7.2. Right button ..........................................................................................................24
2 of 46
7.3. Scroll wheel ...........................................................................................................24
8. Keyboard .................................................................................................... 24
8.1. The Alt, Alt Gr and Ctrl keys .............................................................................24
9. Hard drive ................................................................................................... 25
9.1. Important directories .........................................................................................25
9.2. Hot-swap mobile rack (optional) ...................................................................26
9.3. Connecting an external hard drive (optional) ..........................................29
10. Optical drive (optional) ............................................................................. 30
10.1. Loading a disc .......................................................................................................30
10.2. Playing/reading discs .........................................................................................31
10.3. Blank CDs and DVDs ...........................................................................................31
11. Card reader (optional) ............................................................................... 32
11.1. Inserting a memory card ..................................................................................33
11.2. Removing memory card ...................................................................................33
12. Graphics system ......................................................................................... 33
13. Sound system ............................................................................................. 34
14. USB connection (optional) ........................................................................ 34
15. Network operation .................................................................................... 35
15.1. Wireless LAN (Wi-Fi)............................................................................................35
15.2. Bluetooth ...............................................................................................................36
16. Settings ...................................................................................................... 37
16.1. Reset PC to factory settings .............................................................................37
16.2. UEFI setting ...........................................................................................................38
17. FAQ - Frequently Asked Questions ........................................................... 39
18. Customer service ....................................................................................... 39
18.1. What to do in case of hardware problems .................................................39
18.2. Find the cause ......................................................................................................39
18.3. Faults and possible causes ...............................................................................40
18.4. Do you need more help? ..................................................................................40
18.5. Driver support ......................................................................................................41
19. Transport .................................................................................................... 41
20. Cleaning and care ...................................................................................... 41
21. Upgrading/modifying and repair ............................................................. 41
21.1. Notes for service technicians ..........................................................................42
22. Recycling and disposal .............................................................................. 43
23. Information about the scope of delivery ................................................. 44
23.1. Keyboard and mouse .........................................................................................44
23.2. WiFi USB ..................................................................................................................44
24. Legal Notice................................................................................................ 45
25. Index ........................................................................................................... 46
3 of 46
1. About these operating instructions
Read the safety instructions carefully before using the device for the first
time. Note the warnings on the device and in the operating instructions.
Always keep the operating instructions close to hand. If you sell the
device or give it away, please ensure that you also pass on these
instructions.
1.1. Explanation of symbols
DANGER!
Warning of immediate mortal danger!
WARNING!
Warning of possible risk of fatal injury and/or
serious irreversible injuries!
WARNING!
Warning: danger due to excessive volume!
CAUTION!
Danger of possible minor or moderate injuries!
NOTICE!
Please follow the guidelines to avoid property damage!
Additional information on using the device!
NOTICE!
Please follow the guidelines in the operating instructions!
Declaration of conformity
Products that feature this symbol meet the requirements of the
EC directives (see section ‘Declaration of conformity’)
4 of 46
1.2. Proper use
This device is designed for the use, management and editing of electronic
documents and multimedia content, as well as for digital communication and it is
only intended for private and not commercial/industrial use.
Please note that we shall not be liable in cases of improper use:
• Do not modify the device without our consent and do not use any auxiliary
equipment which we have not approved or supplied.
• Use only spare parts and accessories that we have supplied or approved.
• Heed all the information in these operating instructions, especially the safety
information. Any other use is deemed improper and can cause personal injury or
damage to the device.
• Do not use the device in extreme environmental conditions.
1.3. Declaration of conformity
This PC is supplied with the following wireless features:
• Wireless LAN (optional)
• Bluetooth (optional)
• Keyboard (optional)
• Mouse (optional)
Medion AG hereby declares that this product conforms with the essential
requirements and the remaining relevant regulations:
• RE Directive 2014/53/EU
• Ecodesign Directive 2009/125/EC
• RoHS Directive 2011/65/EU.
If your device operates with a network connection in the 5 GHz frequency range of
the integrated wireless LAN solution, the device may only be used inside buildings
in EU countries (see table).*
Full declarations of conformity are available at www.medion.com/conformity.
* In order to meet this requirement, you should not use channel range 34 - 64 on your wireless LAN
access point.
5 of 46
AT BE BG CZ DK
EE FR DE IS IE
IT EL ES CY LV
LI LT LU HU MT
NL NO PL PT RO
SI SK TR FI SE
CH UK HR
AT = Austria, BE = Belgium, CZ = Czech Republic, DK = Denmark, EE = Estonia,
FR = France, DE = Germany, IS = Iceland, IE = Ireland, IT = Italy, EL = Greece,
ES = Spain, CY = Cyprus, LV = Latvia, LT = Lithuania,
LU = Luxembourg, HU = Hungary, MT = Malta, NL = Netherlands, NO = Norway,
PL = Poland, PT = Portugal, RO = Romania, SI = Slovenia, SK = Slovakia, TR = Turkey,
FI = Finland, SE = Sweden, CH = Switzerland, UK = United Kingdom, HR = Croatia
1.4. Information on trademarks
Windows® is a registered trademark of Microsoft®. Intel®, the Intel® logo, Intel
Inside®, Intel Core®, Ultrabook™ and Core Inside® are trademarks of the Intel®
Corporation in the USA and other countries.
The HDMI logo and High-Definition Multimedia Interface are registered trademarks
of HDMI Licensing LLC.
The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG,
Inc. and are used by Lenovo/Medion under licence.
Other trademarks are the property of their respective owners.
6 of 46
2. Safety information
2.1. Dangers for children and people with reduced
ability to operate machinery
This device is not intended for use by people (including
children) with reduced physical, sensory or mental abilities or
for those without experience and/or knowledge, unless they are
supervised by a person responsible for their safety or they have
been instructed in its use.
• Children should be supervised to ensure that they do not play
with the product.
• Children should not be allowed to use this device without
supervision.
• Keep the device and accessories out of reach of children.
DANGER!
Risk of suffocation!
Packaging film can be swallowed or used improperly.
Therefore, there is a risk of suffocation!
Keep packaging material such as plastic film or
plastic bags away from children.
2.2. Operating safety
Read this section carefully and follow all instructions given. The
instructions will help you to operate your PC reliably and help
increase its service life.
Liquids penetrating the device may impair the electrical
safety of the product.
Avoid exposing the device to water droplets or spray and do
not place anything containing water, e.g. vases, on the device.
The slots and openings on the PC are for ventilation
purposes.
Do not cover these openings as this could cause the device to
overheat.
7 of 46
When setting up the PC make sure that it has a minimum
clearance of 20cm on all sides.
Do not insert anything into the PC through the slots and
openings.
This could result in an electrical short circuit, an electric shock
or even ignite a fire which will damage your PC.
There is a risk of electric shock or fire when the PC casing is
open.
Never open the casing of the PC!
Never use the PC when the casing is open.
There is a risk of electric shock or fire when the mains
adapter is open.
Never open the mains adapter!
Never manipulate the mains adapter or live components!
The optical drives (CDRW, DVD, DVD-RW) constitute class 1
laser equipment.
Do not remove the drive cover as invisible laser radiation can
escape.
Switch the PC off immediately/do not switch the PC on and
contact customer services if ...
• the power cable or the attached plugs are burnt or damaged.
Have faulty mains adapters/mains cables replaced only with
original parts.
These parts should not be repaired under any circumstances!
• the PC casing is damaged or liquid has penetrated into the
device.
Have the PC inspected by customer services first. Otherwise,
it may not be possible to operate the PC safely and there is a
risk of fatal electric shock!
8 of 46
2.3. Never carry out repairs yourself
CAUTION!
Risk of electric shock!
There is a risk of electric shock if repairs are not carried
out by qualified personnel!
Never try to open or repair the product yourself!
In the event of a fault, please contact the Service
Centre or an approved repair specialist.
2.4. Data backup
PLEASE NOTE!
Back up your data on external storage media before each update. We do
not accept any liability for compensation claims arising from the loss of
data or any consequential damages incurred.
3. Package contents
Please check your purchase to ensure that all items are included. If anything is
missing, please contact us within 14 days of purchase. If you do contact us, please
give your serial number.
The following components are supplied with the PC you have purchased:
• PC and connection cable
• Keyboard and mouse (optional)
• Documentation
DANGER!
Risk of suffocation!
Packaging film can be swallowed or used improperly.
Therefore, there is a risk of suffocation!
Keep packaging material such as plastic film or
plastic bags away from children.
9 of 46
4. Setting up the PC
Setting up your PC in the right way helps to ensure that your PC is comfortable to
operate.
4.1. Installation location
• Set up all components on a stable, level and vibration-free surface and only
operate them on a surface of this kind to prevent the PC from malfunctioning.
• Keep your PC and all connected devices away from moisture and avoid dust, heat
and direct sunlight. This will avoid faults or damage to your PC.
• Your PC is not suitable for use at VDU workstations within the meaning of §2 of the
German VDU workstation regulation.
4.2. Environmental requirements
• The PC can be operated at an ambient temperature of +10°C to +35°C and at a
relative humidity of 30% - 70% (non-condensing).
• When switched off, the PC can be stored at temperatures from -20°C to 50°C.
• During a thunderstorm, disconnect the mains plug and, in particular, remove
the network cable and, if applicable, the antenna cable. For extra safety, we
recommend using an overvoltage protection device to prevent your PC from
sustaining damage from the mains supply as a result of power surges or lightning
strikes.
• After transporting the PC, wait until it has reached ambient temperature before
switching it on. Major changes in temperature or fluctuations in humidity can
cause moisture to build up within the PC due to condensation – this can cause an
electrical short circuit.
4.3. Ergonomics
PLEASE NOTE!
Avoid dazzle, reflections and strong bright-dark contrast in order to
protect your eyes.
The monitor should never be placed next to a window because this is the brightest
part of the room in daylight. This brightness can make it more difficult for the eyes to
adjust to the darker monitor.
The monitor should always be positioned so that the direction of vision is parallel to
the window frontage.
The parallel line of vision should also be maintained in relation to artificial lighting
equipment. In other words, the same criteria and principles apply where the
workspace is illuminated with artificial light.
If it is not possible to position the screen as described, the following can be helpful:
• Rotate, lower or tilt the monitor;
• Slatted or vertical blinds on the windows;
• Partitions or changes to artificial lighting.
10 of 46
PLEASE NOTE!
Take regular breaks when working at your monitor to prevent tenseness
and fatigue.
Sitting for a long time without changing position can be uncomfortable. Correct
posture is very important for minimising the risks of physical problems or damage.
90°
40 - 45°
50 - 60 cm
46 - 55 cm
66 - 71 cm
• In general – change your position frequently (around every 20-30 minutes) and
take regular breaks to avoid tiredness.
• Back – when sitting at your workstation, your back must be supported by your
chair’s backrest, which must be upright or angled slightly back.
• Arms – your arms and elbows should be relaxed and loose. Your elbows should
be close to your body. Hold your forearms and hands roughly parallel to the
floor.
• Wrists – when working with the keyboard, mouse or trackball, your wrists
should be stretched out and not bent at an angle of more than 10°, where
possible. Make sure that your wrists are not resting on the table edge itself.
• Legs – your thighs should be horizontal or angled slightly down. Your lower legs
should form an angle with your thighs of approximately 90°. Your feet should be
resting flat on the floor. Use a foot rest if you need one, but first make sure that
your seat height has been adjusted correctly.
• Head – your head should be upright or bent very slightly forward. Do not work
with your head or upper body twisted.
As you work, the top edge of the monitor should be at eye level or very slightly
lower.
The distance between the monitor and the person viewing it depends on
individual requirements. Distances between 50 and 70cm are commonly used.
11 of 46
5. Connecting
PLEASE NOTE!
The devices listed are not necessarily supplied. You only need to
connect up those components that you want to operate on your PC. If
you do not have the described device, you can simply skip the relevant
point and carry out these steps at a later point in time if required.
5.1. Connecting the cables
Follow the instructions below to connect your PC correctly and safely:
• Maintain a distance of at least one metre from sources of high-frequency and
magnetic interference (TV sets, loudspeakers, mobile phones, DECT telephones,
etc.) in order to avoid malfunctions and data loss.
• Please note that only shielded cables that are shorter than 3 metres may be
connected to the external interfaces of this PC. Please only use double-shielded
cables for printer cable connections.
• Position the cable so that it cannot be stepped on or tripped over.
• To avoid damaging the cables, do not place any objects on them.
• In order to prevent cable breaks, do not crush or bend cables, because this could
cause a short circuit.
• Do not apply force when connecting cables and plugs and make sure that
connectors are the right way round.
• Do not connect any devices to the PC which do not meet the requirements set
out in the EN60950 standard “Information Technology Equipment – Safety” or
the EN60065 standard “Audio, video and similar electronic apparatus - Safety
requirements”.
• Only connect peripheral devices – such as keyboard, mouse and monitor, etc. –
when the PC is switched off to avoid damage to the PC or the devices.
Some devices may also be connected while the computer is running. This is
generally the case for devices with a USB connection. In all cases, observe the
relevant operating instructions.
• In addition, when connecting your peripherals only use the connecting cables
supplied with those devices.
• Do not expose plug connections to impacts/pressure, e.g. from lateral forces.
This could cause internal and external damage to the product.
• When you disconnect a cable from your device, pull it out by holding the plug
and not the cable.
• Do not exchange the supplied cable for another one. Use only the supplied
cable as this cable has been extensively tested in our laboratory.
• Ensure that all connection cables are connected to their corresponding
peripheral device to avoid any interference radiation. Disconnect any cables that
are not required.
12 of 46
5.2. Opening and closing the front cover (optional)
Some connections are behind the front cover. This is very useful because you can
quickly and conveniently make frequently used connections without turning
around the PC. The closable cover also protects the connections.
5.3. Connecting the monitor (optional)
Your PC has a VGA, DVI connection and/or a DisplayPort.
PLEASE NOTE!
If your monitor has several inputs, only ever connect
one data cable to avoid problems with signal allocation.
Ensure that the plug and the socket fit together
precisely in order to avoid any damage to the
contacts. Due to its asymmetrical shape, the plug will
only fit into the socket in one position.
Connect the screen data cable with the graphics system socket. Remove the
white protective ring (if present) on the monitor plug.
When connecting a VGA or DVI device to the monitor cable, screw the screws in
hand-tight.
5.4. Connecting an HDMI device (optional)
HDMI stands for “High Definition Multimedia Interface”, which is an interface for
fully digital transfer of audio and video data.
You can connect a television set, monitor or projector to this socket if these
output devices have the corresponding connection.
5.5. Connecting USB devices (optional)
PLEASE NOTE!
Only connect your USB devices after initial set-up of your new PC. This
will prevent unnecessary confusion during installation. These devices
can normally be connected during operation. Please refer to the
operating manual for your peripheral device.
• Normally, a choice of several connection sockets is available.
13 of 46
PLEASE NOTE!
Risk of damage!
Ensure that the plug and the socket fit together
precisely in order to avoid any damage to the contacts.
Due to the arrangement of the contacts, the plug will
only fit into the socket in one position.
Connect devices (printer, scanner, camera, etc.) to the corresponding socket.
PLEASE NOTE!
Where possible, always connect your devices to the
port that they were originally installed on. Otherwise
you will be assigned a new ID and the drivers will need
to be reinstalled.
5.6. Connecting PS/2 devices (optional)
If you want to connect a USB mouse or a USB keyboard, you do not need to connect
a PS/2 mouse or keyboard.
Connect the mouse cable to the green PS/2 connection socket.
Connect the keyboard cable to the blue PS/2 connection socket.
5.7. Connecting the audio output / headphones /
speaker boxes
Connect active speaker boxes for playback or an audio connection cable for
recording. Read the operating instructions for your stereo to find out which input
you need to use (usually Line In or Aux).
Connect the cable to the green socket on the back of your PC with the 3.5mm
stereo jack.
14 of 46
5.7.1. Connecting the headphones
Connect the headphones/earphones here.
Connect the cable to the green socket on the front of your PC with the 3.5mm
stereo jack.
WARNING!
Damage to hearing!
Excessive volumes when using headphones or
earphones, as well as changes to the default settings on
the equaliser, driver, software or operating system, can
generate excessive acoustic pressure that can cause
hearing loss.
Before pressing play, set the volume to the lowest
setting.
Start playback and increase the volume to a
comfortable level.
5.7.2. PCs with surround sound system ( Surround) (optional)
Connect the surround sound system as follows:
Connect the cable of the front speaker into the green socket marked FS.
Connect the boxes for emitting sound to the back of the room to the RS socket.
Connect a central speaker or subwoofer to the CS socket.
Connect other speakers for emitting sound to the rear of the room to the SS
socket.
A digital audio output (SPDIF) (optional) can be connected with an optical or coaxial
cable.
Connect an optical cable to the optical socket or a coaxial cable to the coaxial
socket.
Connect the other end of the cable to an audio device that has a corresponding
digital input.
5.8. Connect microphone (optional)
Connect a microphone with a 3.5 mm mono jack plug to the pink socket on the
front of your PC.
Position the microphone so that it is not pointing directly at the speaker. This will
prevent acoustic feedback that creates a loud whistling sound.
5.9. Connecting audio input / recording source
This connection is used for connecting external analogue audio sources (e.g. stereo
system, synthesizer).
Connect the cable to the pale blue socket with the 3.5mm stereo jack.
15 of 46
5.10. Connecting the network ( LAN)
You can prepare your PC for network operation using the network connection.
A network cable normally has two RJ45 plugs so it does not matter which side is
connected to which socket.
Plug one end of the network cable into the PC socket.
Connect the other end to the other PC or hub/switch.
You can find more information on this in the section "Network operation” .
5.11. Connecting e-SATA devices (optional)
e-SATA stands for “external Serial ATA” and is a connection for external hard drives. In
comparison to current USB standards, transfer speed with an e-SATA connection is
higher than with external USB hard drives.
PLEASE NOTE!
Risk of damage!
Ensure that the plug and the socket fit together
precisely in order to avoid any damage to the contacts.
Due to its asymmetrical shape, the plug will only fit into
the socket in one position.
Plug the cable into the e-SATA socket on the front of your PC.
5.11.1. Removing e-SATA devices
Before removing an e-SATA hard drive from your PC, click on the “Safely remove
hardware” icon in the taskbar at the bottom and then on the hard drive that you
want to remove.
5.12. Illumination (optional)
Your PC has illumination that can show different colours and light up in two
operating modes.
5.12.1. Select illumination style
Press the illumination control once in order to switch on the lighting
permanently.
Press the control again to change the operating mode to pulsing light.
Press the control again to switch off the lighting.
5.12.2. Colour selection
Turn the illumination control to the right or left to select the required colour.
16 of 46
5.13. EJECT button
You can use the EJECT button to open the side panel of your PC without the
inconvenience of unscrewing it.
Press the EJECT button to open the side panel.
To close the side panel, ease it back into the housing until it clicks audibly into
place.
5.14. Connecting power supply
Finally, connect your PC and monitor to the power supply.
Plug the mains cable into the socket and then connect it to the mains cable
socket on your PC.
Please observe the following safety information:
DANGER!
Risk of electric shock!
Even when the mains switch is off, some components
of the device are live.
Pull the mains plug out of the socket to disconnect
your PC from the power supply and isolate the
device entirely from voltage sources.
The mains plug socket must be near the PC and easy
to reach.
Only operate the PC on earthed, domestic power
supply sockets.
Use only the mains cable supplied.
For extra safety, we recommend using an
overvoltage protection device to prevent your PC
from sustaining damage from the mains supply as a
result of power surges or lightning strikes.
The standard PC mains adapter has an on and an
off switch. These can be used to switch the PC on
and off. When the switch is at the OFF (0) setting, no
power is being supplied.
Do not start up your PC yet!
Please read the next section first to find out what you need to look out for
during start-up.
17 of 46
6. Starting up for the fi rst time
The operating system and all hardware drivers are pre-installed.
For some programs (e.g. telephone CDs or encyclopaedias), it may be necessary to
insert the relevant disc to call up the data stored on it. The software will prompt you
to do this if necessary.
Once you have made all of the connections and screwed on all of the required
connections, you can start up your PC:
6.1. Starting up your PC
Switching on the monitor.
Switch on the mains switch by moving it to the setting I. (Set this switch to 0 to
disconnect the power supply.)
Press the On/Off switch once to switch on your PC.
Your PC will now start and run through various steps.
PLEASE NOTE!
There should be no bootable disk in the optical drive as this will prevent
the operating system from being loaded from the hard drive.
The operating system will be loaded from the hard disk drive. The loading process
takes a little longer during the initial setup. Once all the necessary data has been
entered, the operating system will be set up. The operating system is fully loaded
once the Windows® start-up screen appears.
PLEASE NOTE!
Data loss!
The initial installation may take a few minutes. Do not
disconnect the PC from the power supply during initial
installation and do not switch it off. This may adversely
affect the installation. Only switch off the PC when
installation has been successfully completed and the
start screen appears.
Follow the instructions on the screen. Step-by-step instructions will guide you
through the process to be followed.
The welcome procedure takes you through several screens and dialogues.
Choose your required language and then the country you require.
18 of 46
Licence agreement
Please read through the licence agreement carefully. It provides important legal
information about the use of your software product. To view the text in full, you
must move the scroll bar downwards using the mouse until you reach the end of
the document. You accept the licence agreement by checking the “I accept the
agreement” button. Only this entitles you to use the product in accordance with the
terms and conditions.
After entering a computer name you can connect your PC to the Internet
immediately on the “Wireless” page if you already have a WLAN system or access
point installed.
If you choose to skip this step, you can connect to the Internet later via the
Windows® interface.
If you have already set up an Internet connection, you can now log in to your PC
using a Microsoft account.
The Microsoft Store allows you e.g. to purchase new apps or update previously
installed apps.
If you log in on a local account, you can set up a Microsoft account later at any time.
The following animated windows are purely for information about using the new
Windows® operating system.
No entries of any kind may be made during the animation. The Windows® interface
appears after the login process.
PLEASE NOTE!
Data loss!
In the first few days following the initial installation,
Windows might update and configure data (e.g. with
new updates), which can result in delays in the PC
shutting down and starting up. For this reason, do not
switch the PC off prematurely. This may adversely affect
the installation.
19 of 46
6.2. Overclocking button (optional)
Your computer is delivered with an application that enables you to overclock the
processor. This is useful if you want higher performance for certain applications,
such as video editing or games.
Depending on computer model, you enable overclocking…
• using the button in the Intel® Extreme Tuning Utility or
• using the OC switch on the front cover.
Regardless of how you enable or disable overclocking, you will always need
to restart your computer. When you launch the Intel® Extreme Tuning Utility, a
corresponding notification will appear.
PLEASE NOTE!
Data loss!
Back up your data on external storage media before
each update or change. We do not accept any liability
for compensation claims arising from the loss of data or
any consequential damages incurred.
6.2.1. Processor overclocking using the button in the Intel®
Extreme Tuning Utility
Launch the Intel® Extreme Tuning Utility by double-clicking the desktop
shortcut.
User Account Control now informs you about changes being made to your
computer. Confirm the query with Yes. You will see the program´s main page
with some information regarding your computer.
Open the OC Genie tab.
Click the OC Genie button to enable overclocking. A message prompts you to
restart your computer.
PLEASE NOTE!
Your computer may be fitted with an OC switch on the front cover or
on the back. If so, then this button has a purely informational purpose.
Disable indicates that overclocking is disabled; if the button shows
Enable, overclocking is enabled.
To disable overclocking, click the Enable button and restart your computer.
20 of 46
6.2.2. Processor overclocking using the OC switch on the front
cover
If your computer has an OC switch on its front cover, you simply need to press
the switch in order to overclock the processor (the switch should click into
position).
Restart your computer for the change to take effect. If you have launched the
Intel® Extreme Tuning Utility, a corresponding notification will appear on the
screen.
To disable overclocking, press the switch again and restart your computer.
6.2.3. Making settings in the Intel® Extreme Tuning Utility
After activating processor overclocking, you can make a number of settings using
the Intel® Extreme Tuning Utility.
For example, you can regulate the overclocking using the settings under CPU
Ratio/Tuning All Contacts. After making a change, you will need to restart your
computer.
PLEASE NOTE!
A warning will appear if you make settings that are not supported by
your computer.
The Intel® Extreme Tuning Utility is also a monitoring tool that shows you
information about the motherboard, memory and processor. The data provided is
purely for information purposes and cannot be changed.
21 of 46
7. Mouse
In addition to the two standard buttons, the mouse also features a third button in
the scroll wheel.
7.1. Left button
The left mouse button is used to make a selection (click once) and to confirm this
selection (double click).
7.2. Right button
The right mouse button is used to call up commands (context menus) in certain
places.
7.3. Scroll wheel
The scroll wheel in the middle has two functions:
• you can use the wheel to scroll through long documents e.g. websites or text
files.
• depending on the configuration of the mouse, the wheel can also be used as a
third button.
The scroll wheel can be configured via the mouse settings in the control panel.
PLEASE NOTE!
If the mouse pointer moves jerkily on the screen, please try operating
it on a different surface (mouse pad). Glass and metallic surfaces might
cause problems.
8. Keyboard
In addition to the standard numbers and characters, the keyboard can also be used
to enter a number of special characters, as well as to perform certain commands
depending on the program. These special functions are controlled using the keys
Alt; Alt Gr and Ctrl.
8.1. The Alt, Alt Gr and Ctrl keys
The Alt key is used in combination with other keys to perform particular functions.
These functions are determined by the program being used. To enter a keyboard
shortcut with the Alt key, you press and hold down the Alt key as you press the
other key. The Alt Gr key works in a similar way to the Alt key, but is used to obtain
certain special characters. The Ctrl key (Control) performs program functions in the
same fashion as the Alt key.
22 of 46
9. Hard drive
The hard drive is your main memory medium and combines high storage capacity
with rapid data access.
Your PC is supplied with an OEM version* of the Microsoft Windows® operating
system which fully supports all of the PC’s performance features. We have
configured your PC’s hard drive so that you will be able to work with it optimally
without having to install any additional drivers yourself.
The Windows® operating system requires part of the capacity to manage the hard
drive and, therefore, the hard drive’s full capacity is not available. This explains any
differences between the BIOS display and the operating system display. The PC’s
operating system, other applications and security data are located on the hard drive
meaning that the full capacity is already reduced.
PLEASE NOTE!
Data loss!
Never try to switch off the PC while it is accessing the
hard drive as this could lead to a loss of data.
9.1. Important directories
PLEASE NOTE!
Data loss!
Do not delete or modify these directories or their
content otherwise data may be lost or system
functionality may be impaired.
The root partition (C:\) contains the operating system, the applications and the
“Documents” folder for the configured user.
We have listed the most important directories below and described their contents.
C:\User
This directory contains a folder for each user configured on the computer. In this
folder, there are a number of important files and folders required for starting and
operating Windows® that are hidden by default for security reasons.
C:\Programs
This directory contains the files belonging to the installed applications.
C:\Windows
The main directory for the Windows installation. This directory contains the files for
the operating system.
* Original equipment manufacturer/program versions purchased from the manufacturer which are
usually sold in conjunction with end devices
23 of 46
The second partition (D:\) is used for data backup and also contains drivers (D:\
Drivers) and utilities (D:\Tools) for your PC.
PLEASE NOTE!
Depending on the configuration of the computer, there may be other
partitions with different drive designations. Therefore, it should be
noted that the drive designation “D:\” given here is an example and may
be different on your computer.
D:\Drivers
This directory contains copies of the drivers required for your PC. These files may be
required after a system restore.
D:\Tools
You will find additional programs and other documentation about your PC here.
D:\Recover
You will find the system recovery files here with which you can restore the computer
to the factory settings.
PLEASE NOTE!
Data loss!
In addition, you will find the start-up files for the
system restore tool, as well as the installation files for
Windows®, on other non-rewritable partitions. These
partitions are not visible and cannot be deleted.
9.2. Hot-swap mobile rack (optional)
An additional external hard drive can be connected behind the front cover via a
hot-swap SATA mobile rack for 2.5” or 3.5” hard drives.
NOTICE!
Please bear in mind that only the mobile rack supplied can be used.
9.2.1. Installing a 3.5” hard drive in a 3.5” mobile rack
The mobile rack is made of plastic and enables the hard drive to be installed
without the need for tools.
The 3.5” mobile rack has four premounted hard drive decouplers, which consist of a
rubber bushing with a thin metal holding pin.
24 of 46
NOTICE!
Only 3.5” hard drives can be installed in this mobile rack. It is not
possible to install a 2.5” SSD drive.
Proceed as follows:
Pull the mobile rack out of the slot.
Place the mobile rack onto a firm surface with the open side facing upwards. If
necessary, use a soft surface to minimise any knocks or collisions. The handle
must be facing in your direction.
Turn the hard drive so that you can see its lower surface and the contacts are
located in the top left.
Now insert the hard drive at an angle into one side of the mobile rack and
ensure that the metal pins on the hard drive decouplers fit into the screw holes
on the side of the hard drive.
Now carefully fold open the other side of the mobile rack so that the hard drive
can slide under the side strips.
Ensure that the metal pins on the hard drive decouplers also slide into the screw
holes on the other side of the hard drive. The hard drive is now locked in place
and it is not possible for it to slip out of position when inserting the mobile rack.
Turn over the mobile rack so that the top surface of the hard drive is facing
upwards and carefully slide the mobile rack into the slot until it clicks into place.
The hard drive will be recognised and can now be used.
NOTICE!
If the hard drive has been correctly installed, there will be a gap of
approx. 3 mm in front of the handle on the mobile rack. If this is not
the case, check once again whether the hard drive is correctly locked
in place via the metal pins on the decouplers. If necessary, correct the
position of the hard drive and the decouplers.
9.2.2. Installing a 3.5” hard drive in a 2.5”/3.5” mobile rack
The mobile rack is made of metal and enables the hard drive to be installed without
the need for tools.
The 2.5”/3.5” mobile rack has a premounted hard drive decoupler, which consists of
a rubber bushing with two thin metal holding pins.
Proceed as follows:
Unlock the mobile rack by pressing the release lever.
Pull the mobile rack out of the slot.
25 of 46
Place the mobile rack onto a firm surface with the open side facing upwards. If
necessary, use a soft surface to minimise any knocks or collisions. The handle
must be facing in your direction.
Pull the hard drive decoupler out of the mobile rack.
The upper surface of the hard drive should be facing upwards
with the contacts located in the bottom right.
Now insert the hard drive at an angle into one side of the
mobile rack.
Ensure that both small hooks on the mobile rack slide into
the screw holes on the hard drive. Then carefully allow the
hard drive to slide completely into the mobile rack.
Press the hard drive decoupler back into the mobile rack.
Ensure that both metal pins slide into the screw holes on the
hard drive.
Carefully slide the mobile rack into the slot until it clicks into place.
Lock the mobile rack in place by pressing on the handle until it audibly clicks
into place. The hard drive will be recognised and can now be used.
9.2.3. Installing a 2.5” SSD drive in a 2.5”/3.5” mobile rack
When installing an SSD drive, follow the first four steps in the previous instructions
and then proceed as follows:
The upper surface of the hard drive should be facing upwards with the contacts
located in the bottom right.
Now insert the right side of the hard drive into the mobile rack.
Tightly hold the hard drive and the mobile rack, turn it over
and use four M3 x 4mm countersunk screws (not supplied)
to screw the hard drive in place using the corresponding
screw holes.
NOTICE!
The hard drive decoupler does not need to be replaced because the
hard drive has been sufficiently secured in place by the screws.
Carefully slide the mobile rack into the slot until it clicks into place.
Lock the mobile rack in place by pressing on the handle until it audibly clicks
into place. The hard drive will be recognised and can now be used.
26 of 46
9.3. Connecting an external hard drive (optional)
Your PC has a hard drive bay that can be used for easily and conveniently
connecting a MEDION HDDrive 2Go super speed* external hard drive via the USB 3.0
connection.
The connection is made, just like with a USB memory stick, while the operating
system is running. The hard drive will be automatically recognised as a removable
data medium and will be allocated a drive letter.
PLEASE NOTE!
This hard drive bay is only compatible with MEDION HDDrive 2Go super
speed hard drives. All other HDDrive 2Go hard drives from previous
generations cannot be used!
PLEASE NOTE!
Risk of damage!
In order to protect the connections on the data port,
the plugs are fitted with dust caps that need to be
removed before use. These caps should be replaced if
these connections are not being used.
MEDION HDDrive 2Go super speed hard drives are available in the following sizes:
• MEDION hard drive HDDrive 2Go super speed 6.35 cm/2.5" USB 3.0 and
• MEDION hard drive HDDrive 2Go super speed 8.89 cm/3.5" USB 3.0.
* MEDION HDDrive 2Go super speed hard drives are not included in the delivery.
27 of 46
10. Optical drive (optional)
10.1. Loading a disc
PLEASE NOTE!
Risk of damage!
The high speeds in the drive can cause defective media
to break and damage your device. Damage caused by
faulty media is not covered under warranty and repairs
will be chargeable.
Do not use scratched, broken, dirty or poor quality
discs.
Do not stick protective film or other stickers onto
the discs because the adhesive could damage the
surface of the disc and destroy your data.
Inspect discs carefully before inserting them. If
damage or dirt is visible, do not use these discs.
10.1.1. In horizontalem Laufwerk
Press the eject button on the optical drive to open the drawer.
Insert the disc into the drawer with the label facing upwards so that it is lying flat.
Carefully push the drawer until you feel some resistance and the drawer
automatically moves back into the optical drive.
10.1.2. In vertikalem Laufwerk
Anders als bei optischen Laufwerken in gängigen Desktop-PCs verwendet dieser PC
ein senkrecht eingebautes Laufwerk ähnlich denen in Notebooks.
Press the eject button on the optical drive to open the drawer.
Drücken Sie die Disc vorsichtig auf die Halterung in der Mitte der Lade bis diese
hörbar einrastet. Die Beschriftung zeigt hierbei nach links.
Check that the disc can turn freely and then carefully slide the drawer back into
the optical drive until it clicks into place.
In the factory settings, your optical drive is allocated the drive letter “E:\”. You can
conveniently access the data on your discs using Windows Explorer (Computer). Run
Windows Explorer using the shortcut on the taskbar or by simultaneously pressing
the Windows key and the “E” key. When accessing DVD videos (or audio and video files
on conventional data CDs), the pre-installed media player is used automatically.
28 of 46
10.2. Removing the disc
PLEASE NOTE!
Data loss!
Do not try to remove the disc from the drive while the PC
is accessing the optical drive.
In order to remove the disc, press the eject button again.
Remove the disc and store it in a CD case.
Close the drive again.
10.3. Playing/reading discs
PLEASE NOTE!
Some discs start automatically when they are inserted. This depends on
the operating system and the corresponding settings.
The optical drive on your PC is capable of playing audio CDs, DVD films or data
discs. Once a disc has been loaded, a dialogue box opens containing various
playback options. Normally, there will be a number of different options available.
Playback of DVD film titles includes decoding MPEG2 video, digital AC3 audio data
and decoding CSS-protected content.
CSS (sometimes also referred to as Copy Guard) is the name of a data protection
program used by the film industry to protect against illegal copying. Among the
many controls for CSS licensees, the most important of the playback restrictions
involve country-specific content. To make it easier to create geographically separate
film releases, DVD titles are coded for specific regions. Copyright laws require that
each DVD film be limited to a specific region (usually the region where it is sold).
DVD film versions can be published in multiple regions but CSS rules require that
each CSS decoder system may only be used for one region.
PLEASE NOTE!
The region setting can be changed up to five times via the viewing
software before the last setting becomes permanent. If you then wish
to change the region setting again, this must be carried out by the
manufacturer. Any shipping and configuration costs must be borne by
the user.
10.4. Blank CDs and DVDs
Normal CDs are pressed from a glass master and then sealed. With blank discs,
digital information is burned on using the drive’s laser. They are therefore more
sensitive then conventional discs.
29 of 46
Because of this, it is essential to avoid, particularly in the case of unused blanks:
• exposure to direct sunlight (UVA/UVB radiation)
• scratches and damage
• extreme temperatures
10.4.1. Important information on high-resolution video
formats (optional)
Depending on the model, your system is supplied with a Blu-ray drive.
The technology used in the Blu-ray drive supports high-resolution video formats.
You can use your drive to play the following media:
• Audio CDs
• CD-R
• CD-RW
• DVD+R/DVD-R
• DVD+RW/DVD-RW
To be able to play back the new video format and new media (Blu-ray discs), the
following prerequisites must also be met:
PLEASE NOTE!
Windows Media Player does not support any high-resolution video
formats.
• The playback software must be updated via the Internet at regular intervals
to ensure it can always play back the latest titles. The update intervals will be
specified by the software providing there is an Internet connection.
• When connecting to a digital output source (e.g. TFT monitor or LCD TV), the
connections (DVI or HDMI) must support the HDCP standard. You can find this
information in the operating instructions for your output device.
30 of 46
11. Card reader (optional)
If your PC is equipped with a card reader, you can use the following types of
memory card.
When inserting the memory cards, ensure that the contacts are facing in the right
direction, as specified in the list below. Inserting a card incorrectly may damage the
card reader and/or the card.
Card type Connection contacts
SD; SDHC (Secure Digital) facing downwards
MMC (MultiMediaCard) facing downwards
Memory Stick facing downwards
Memory Stick Pro facing downwards
11.1. Inserting a memory card
PLEASE NOTE!
Risk of damage!
The memory cards can only be inserted in one
direction. Please observe the instructions in the section
above.
Slide the card in as far as it will go.
When a card is inserted into a slot, it is allocated a free drive letter on the
workstation (but only if it is a removable data medium).
11.2. Removing memory card
Pull the card out of the slot and store it properly.
12. Graphics system
This program gives you the option of customising your desktop. This includes the
background image, the screensaver and other settings for your screen and your
graphics card. The program can be started as follows:
Right-click on the Windows desktop.
Then left-click on Show settings
or
Select the menu option Settings from the Start menu.
Select the System option.
Then click on Screen.
Select the option Adjust display in the dialogue box that is now open.
31 of 46
13. Sound system
The external audio connections can be configured so that you can connect a
surround sound system.
If you wish to change the default volume, click the loudspeaker icon in the taskbar.
WARNING!
Damage to hearing!
Excessive volumes when using headphones or
earphones, as well as changes to the default settings on
the equaliser, driver, software or operating system, can
generate excessive acoustic pressure that can cause
hearing loss.
Before pressing play, set the volume to the lowest
setting.
Start playback and increase the volume to a
comfortable level.
14. USB connection (optional)
PLEASE NOTE!
Devices connected directly to the USB bus may not draw more than 500
mA. The power output is protected by a fuse (limited power source as
per EN 60950). If you want to connect devices that require more power,
you need to connect them to two USB ports using a Y cable.
The USB 3.0 ports are fully backwards compatible with USB 2.0 and 1.1.
Where possible, always connect your USB devices to the same port that they
were originally installed on. Otherwise you will be assigned a new ID and the
drivers will need to be reinstalled.
32 of 46
15. Network operation
15.1. Wireless LAN (Wi-Fi)
Your PC is equipped with WLAN. The components (module, antenna) have already
been integrated into your PC and activated. You can disable this function using the
Windows® device manager if required.
Wireless LAN enables you to establish a network connection to a corresponding
remote station.
PLEASE NOTE!
Do not operate your PC’s wireless LAN function in areas where there are
radio-sensitive devices (e.g. in hospitals etc.). If you are unsure whether
the use of these devices will result in damage or interference, disable
this option.
15.1.1. Requirements
A so-called LAN access point can be used as a remote station. An access point is a
radio-transmitting device that communicates with your PC and controls access to
the connected network. LAN access points are frequently found in large offices,
airports, train stations, universities or Internet cafés. They provide access to
particular services and networks or to the Internet. Access permissions are generally
necessary and often result in usage charges. Access points often have built-in DSL
modems. These so-called routers establish the connection to the existing DSL
Internet connection and the wireless LAN. A connection can also be established
to another end device using wireless LAN functionality without an access point.
Without a router, however, the network is restricted to those devices directly
connected to it.
The wireless network connection works in accordance with the IEEE 802.11ac*
standard and is compatible with the IEEE 802.11b/g/n standard.
If encryption is used for the transfer, the same procedure must be used for all
devices. Encryption is a procedure to protect the network from unauthorised access.
The transfer speed can vary depending on the distance and the number of users
accessing the remote station.
* To make use of the full performance, a WLAN router compatible with the 802.11ac standard is
required.
33 of 46
15.2. Bluetooth®
Bluetooth technology is used to wirelessly bridge short distances. Bluetooth devices
transfer data via radio so that computers, mobile phones, printers, keyboards, mice
and other devices can communicate with one another wirelessly. Bluetooth wireless
technology has numerous possible applications. A few of them are listed below:
• Creating a wireless Internet connection using a mobile phone.
• Transferring files between computers or between a computer and another device.
• Printing using a Bluetooth printer.
• Using a Bluetooth keyboard and mouse.
• Connecting to a PAN (Personal Area Network).
The Bluetooth wireless technology data transfer speed can vary depending on the
device or environmental factors. Data can be transferred through walls, jacket pockets
and briefcases using a Bluetooth device. The transfer between Bluetooth devices occurs
at the high frequency of 2.4 Gigahertz (GHz).
PLEASE NOTE!
Do not operate the Bluetooth function in locations (e.g.: hospitals,
aeroplanes, etc.) where there is sensitive equipment. Do not switch the
device unless you are sure it will cause no interference.
34 of 46
16. Settings
16.1. Reset PC to factory settings
In the event of problems with installation or other software problems which make
it necessary to reinstall the software, Windows® offers three options for reinstalling
Windows® on your PC.
First ensure that you have backed up all important data and programs.
16.1.1. Start system restore
Restart the PC and press the F11 button during the boot process to start
PowerRecover.
or
Click on the PowerRecover app in the Start menu to start the program.
You will be offered the following options:
• Create driver and tool rescue media
The drivers and tools will be saved to a storage medium.
−Create driver and tool rescue media
Create a support disc
−Create driver and tool rescue USB disk
Create a support USB storage medium
• Update your PC, without damaging your data
Updates the PC with the help of the Windows recovery options.
−Keep my files
All apps and settings will be deleted, while personal data will be retained.
−Remove everything
All data, apps and settings will be deleted.
• Restore
The PC will be restarted and reset to the factory settings.
− Reset to HDD - user data not saved
All data on the PC will be permanently deleted.
The factory settings will be restored.
− Reset to HDD - user data saved
The factory settings will be restored and all user data under C:\USERS will be
backed up.
Click on Next and follow the on-screen instructions to restore the factory
settings.
35 of 46
PLEASE NOTE!
Data loss!
The recovery process takes a long time when you select
the option to back up user data. Only the data located
in the folder C:\USERS will be backed up. All other data
will be deleted. It is therefore important to perform
regular data backups to external data media. We do not
accept any liability for claims for compensation arising
from a loss of data or for any consequential damages.
16.2. System restore with Windows Recovery Options
If you experience problems with your device, you can refresh or reset it. Windows
is reinstalled when you refresh your device. Your personal files and settings are
retained.
Windows is also reinstalled when you reset your device. However, your files, settings
and apps – except for the apps pre-installed on the device – are deleted.
PLEASE NOTE!
If your notebook does not start properly three times in a row, the
Windows recovery menu automatically appears.
16.2.1. How to refresh your device
Open the start menu.
Select the Settings app from the list.
Tap or click on Update & Security.
Tap or click on the menu option Recovery.
Tap or click on Get started.
A dialogue box will now open, select the recovery option Keep my files to
refresh your notebook.
16.2.2. How to reset your device
Open the start menu.
Select the Settings app from the list.
Tap or click on Update & Security.
Tap or click on the menu option Recovery.
Tap or click on Get started.
A dialogue box will now open, select the recovery option Remove everything to
completely reinstall Windows.
36 of 46
PLEASE NOTE!
Always perform any type of recovery using AC power.
PLEASE NOTE!
If you have forgotten the Windows password for your device, you can
also restore the notebook from the login screen after rebooting the
device.
To do this, hold down the Shift key while on the login screen and then
select Power > Restart in the bottom right. After rebooting the
device, select Troubleshoot > Reset this PC.
16.3. UEFI setting
The UEFI setting (the basic hardware configuration of your system) offers you
numerous configuration options for operating your PC.
For example, you can modify the operating mode for interfaces, security features or
power supply management.
ATTENTION!
Data loss!
The PC has already been configured by the
manufacturer to ensure optimum operation. Please
only change settings where strictly necessary and if you
are familiar with the configuration options.
16.3.1. Executing the UEFI setting
You can only run the configuration program upon system start-up. If you have
already started up your PC, exit Windows® and restart your PC.
Before restarting your PC, press the button Entf and hold it down until the
message Entering Setup appears.
16.3.2. Clear CMOS (optional)
PLEASE NOTE!
If you have changed settings that unexpectedly result in the PC
becoming unstable, you can delete the CMOS memory using the Clear
CMOS button and restore the UEFI to its factory settings.
37 of 46
17. FAQ - Frequently Asked Questions
Where can I find the necessary drivers for my PC?
• The drivers can be found in the second hard drive partition in the Drivers and
Tools folders.
What is Windows activation?
• You will find a relevant section in these operating instructions containing
detailed information on this topic.
How do I activate Windows?
• Windows is activated automatically as soon as an Internet connection is
established.
How do I activate Windows without an Internet connection?
• Windows can also be activated over the telephone. Follow the instructions in the
section Windows activation to activate Windows by telephone.
When is restoring factory settings recommended?
• This method should only be selected as a last resort. Read about the alternatives
in the System restore section.
How do I perform a data backup?
• Perform a backup or backup synchronisation of selected data onto external
media to familiarise yourself with the technology. A backup is of no use if you
are unable to recover the data or if the medium is faulty or is no longer available.
Why do I need to reinstall my USB device even though I have already done it?
• If the device is not operated on the same USB port as the one it was installed in,
it automatically receives a new identifier. The operating system then treats it like
a new device and tries to reinstall it.
• Use the installed driver or connect the device to the port on which it was
originally installed.
18. Customer service
18.1. What to do in case of hardware problems
Malfunctions can sometimes have different causes, so we have included a guide
that might help to solve any problems.
If these tips don’t do the trick, then we’ll be more than pleased to help you out. Just
give us a call!
18.2. Find the cause
Start by carefully checking all the cable connections. If the indicator lights are not
working, ensure that the PC and all peripheral devices are correctly connected to
the power supply.
Check the mains socket, mains cable and all of the switches in the main socket’s
circuit.
38 of 46
Turn off the PC and check all cable connections.
Do not swap around the cables for the various devices, even if they look exactly
the same. The polarity of the various cables may be different.
Once you have ensured that the power supply to the device is working correctly
and all connections are intact, then switch the PC back on.
18.3. Faults and possible causes
The screen is black.
Make sure that your PC is not in hibernate mode.
Wrong time and date displayed.
Click the clock display in the taskbar. Select the option Change date and time
settings... and then set the correct values.
The cards in the card drive will be allocated a different drive letter after the
reboot.
This can happen if the card reader updates its slot during system start-up. New
IDs are issued, if required, which can lead to some cards having new drive letters.
No data can be read by the optical drive.
Check whether the disc has been inserted correctly.
The mouse or keyboard does not work.
Check the cable connection.
If you have a wireless mouse or wireless keyboard, check the batteries and the
receiver.
Not enough space is available on the hard disk drive.
Save data you do not need to CD-Rs, DVDs or other external media.
The PC will not start.
If the cable connections are correct, try resetting the PC’s mains adapter. Move
the mains switch on the back of the PC to the position 0 (OFF). Then press and
hold the mains switch on the front for 10 seconds. Wait another 5 seconds and
start up your PC again.
Apps (e.g. the weather app) cannot be displayed as live tiles.
Check the date, time zone and time.
18.4. Do you need more help?
You’ve checked through the suggestions in the previous section and you’re still
having problems? Then call the hotline for the country where you bought the PC.
We will try to help you over the phone. Before contacting us, however, please have
the following information ready:
• Have you made any upgrades or modifications to the initial configuration?
• What peripheral devices do you use?
• What messages, if any, appear on the screen?
• What software were you using when the problem occurred?
• What steps have you already taken to try and rectify the problem?
39 of 46
18.5. Driver support
The system has been thoroughly and successfully tested with the installed drivers
in our test laboratory. It is normal in the computer sector, however, for the drivers to
need updating from time to time.
This is because there may be compatibility problems with other components
(programs, devices) which have not yet been tested.
19. Transport
Please note the following advice on transporting your PC:
• Pack your PC using the original packaging to avoid transport damage.
20. Cleaning and care
You can extend the life expectancy of your PC by following the advice below:
PLEASE NOTE!
None of the parts inside the PC housing require cleaning or
maintenance.
• Always unplug the device and disconnect all cables before cleaning. Clean the
PC with a damp, lint-free cloth.
• Do not use solvents, corrosive agents or aerosol-based detergents.
• Do not use CD-ROM cleaning discs or similar products that clean the lens of
the laser to clean your optical drive (CD/DVD). The laser does not need to be
cleaned.
• Dust can block the ventilation openings, which can lead to overheating and
malfunctions. Check at regular intervals that the ventilation openings guarantee
adequate air circulation (approx. every 3 months). Use a vacuum cleaner to
remove dust from the ventilation openings. If your device regularly attracts a
lot of dust, we recommend that you also have the inside of your PC housing
cleaned by a specialist.
21. Upgrading/modifying and repair
Upgrades and modifications to your PC should only be carried out by qualified
specialists. If you do not have the necessary qualifications, have the work carried out
by a qualified service technician. Please contact your customer service department
if you are having technical problems with your PC.
if a repair must be carried out, please contact only our authorised service partner.
40 of 46
21.1. Notes for service technicians
Before opening the housing, disconnect all power and connecting cables. If the
PC is not disconnected from the power supply before being opened, there is
a risk of fatal electric shock. There is also a risk that the components could be
damaged.
Internal components of the PC may be damaged by electrostatic discharge
(ESD). Carry out repairs, as well as system enhancements or modifications, at
an ESD workplace. If such a workplace is not available, wear an antistatic cuff
or touch an earthed, metallic object. We will charge for any repairs to damage
caused by incorrect handling.
Use only original replacement parts.
CAUTION!
Risk of explosion!
There is a lithium battery on the motherboard.
Batteries are special waste and must be disposed of
properly.
Never try to recharge the battery.
Do not expose the battery to high temperatures or
fire.
Please note the polarity when changing the battery.
Keep batteries away from children.
Replace the battery only with the same type
(CR 2032).
21.1.1. Information on laser radiation
• Laser equipment classified as laser class 1 to laser class 3b can be used in the PC.
The equipment meets the requirements for laser class 1.
• By opening the housing of the optical drive, you will have access to laser
equipment classified up to laser class 3b.
The following should be observed when removing and/or opening this laser
equipment:
• The integrated optical drive contains no parts that require repair or
maintenance.
• Repairs to the optical drive should only be carried out by the manufacturer.
• Do not look directly into the laser beam, even when using optical instruments.
• Do not allow yourself to be exposed to the laser beam. Avoid exposing your eyes
or skin to the laser beam – either directly or through scattered laser radiation.
41 of 46
22. Recycling and disposal
If you have any questions about disposal, please contact your sales agent or our
service centre.
PACKAGING
Your device has been packaged to protect it against transportation
damage. Packaging is raw material and can be re-used or added to the
recycling system.
APPLIANCE
At the end of its service life, the device should not be disposed of with
the household rubbish. Enquire about the options for environmentally
friendly and appropriate disposal.
BATTERIES/RECHARGEABLE BATTERIES
Do not dispose of used or defective batteries in the household rubbish!
They should be taken to a collection point for used batteries.
42 von 46
23. Information about the scope of delivery
23.1. Keyboard and mouse
Model Manufacturer
Keyboard
K28
K31 Sysgration
KB313U
KB313W WELL PARK
Mouse
AGM-946
S6 Sysgration
MA105U
MA105W
MG100U
WELL PARK
Receiver RG10-P WELL PARK
23.2. WiFi USB
Model Manufacturer
WiFi USB
EW-7811GLN
EW-7811UTC
EW-7611ULB
EW-7611UCB
Acelink/Edimax
43 of 46
24. Legal Notice
Copyright © 2016
All rights reserved.
This operating manual is protected by copyright.
Mechanical, electronic and any other form of reproduction
is prohibited without the written permission of the
manufacturer.
Copyright is owned by the company:
Medion AG
Am Zehnthof 77
45307 Essen
Germany
Subject to technical and optical changes as well as printing errors.
The operating manual can be reordered via the service hotline and is available for
download via the service portal at www.medion.com/gb/service/start/.
You can also scan the QR code above and download the operating manual onto
your mobile device via the service portal.
44 of 46
25. Index
B
Bluetooth ....................................................... 33
C
Cable connections ..................................... 11
Card reader ................................................... 30
Memory Stick.......................................... 30
Memory Stick Pro .................................. 30
MMC .......................................................... 30
Removing memory cards ................... 30
SD ............................................................... 30
SDHC.......................................................... 30
Cleaning and care ...................................... 39
Cleaning agents..................................... 39
Clear CMOS ................................................... 36
Connection ................................................... 11
Audio input ............................................. 14
Audio output .......................................... 13
External hard drive ............................... 26
HDMI .......................................................... 12
Headphones ........................................... 13
LAN ............................................................. 15
Microphone ............................................ 14
Monitor ..................................................... 12
Power supply .......................................... 16
PS/2 devices ............................................ 13
Recording source .................................. 14
SATA ........................................................... 15
Speaker ..................................................... 13
Surround .................................................. 14
USB devices ............................................. 12
Customer service ........................................ 37
D
Data backup ....................................................8
Declaration of conformity ..........................4
Disposal.......................................................... 41
Driver support ............................................. 39
E
EJECT button ................................................ 16
Environmental requirements ....................9
Ergonomics ......................................................9
Arms ........................................................... 10
Back ............................................................ 10
General ..................................................... 10
Head .......................................................... 10
Legs ............................................................ 10
Wrists ......................................................... 10
External hard drive ..................................... 26
F
Factory settings ........................................... 34
System restore ....................................... 34
FAQ .................................................................. 37
Front slot cover ........................................... 12
G
Graphics card ............................................... 30
Graphics system .......................................... 30
H
Hard drive ...................................................... 22
Hardware problems ................................... 37
HDMI ............................................................... 12
Hot-swap ....................................................... 23
I
Illumination .................................................. 15
Colour selection .................................... 15
Select illumination mode ................... 15
Important directories ................................ 22
Installation location ......................................9
K
Keyboard ....................................................... 21
L
Laser radiation ............................................. 40
M
Monitor .......................................................... 12
Mouse ............................................................. 21
N
Network .................................................. 15, 32
LAN ............................................................. 15
LAN access point ................................... 32
Wireless LAN ........................................... 32
O
Operating safety ............................................6
Operation
Keyboard .................................................. 21
45 of 46
Mouse........................................................ 21
Optical drive ................................................. 27
CD-ROM .................................................... 27
DVD ............................................................ 27
Overclocking ................................................ 19
P
Power supply ............................................... 16
Proper use ........................................................4
PS/2 devices ................................................. 13
R
Recycling ....................................................... 41
Repairs ............................................................ 39
S
Security
Cable connections ................................ 11
Connection .............................................. 11
Service technician ...................................... 40
Setting up the PC ..........................................9
Sound system .............................................. 31
Start-up .......................................................... 17
System restore ............................................. 34
Burn drivers and tools to an optical
disc ............................................................. 34
PowerRecovery ...................................... 34
Reset to HDD - user data not saved 34
Reset to HDD - user data saved........ 34
Restoring the factory settings .......... 34
Update your PC, without
damaging your data ............................ 34
T
Transport ....................................................... 39
Troubleshooting ......................................... 37
U
UEFI firmware setting................................ 36
Upgrades/modifications .......................... 39
USB ........................................................... 12, 31
W
Wireless LAN ................................................. 32
46 of 46
letzte Seite