Middle Atlantic Products 5-RS18 User Manual
Displayed below is the user manual for 5-RS18 by Middle Atlantic Products which is a product in the Rack Accessories category. This manual has pages.
Related Manuals
5-RS Series
5-RS Runner Kits
Instruction Sheet
PART QTY
Pair of Runners 2
Phillips Head Screws 6
1/4-20 Flange Nuts 6
1) Install the runners using the two outer holes.
2) Drill into the center holes using a 9/32" drill bit.
3) Install the remaining nuts and bolts.
1) Install the runners to the enclosure bottom through the holes
shown using the supplied hardware. (FIGURE A)
2) Install the screws and nuts as shown. (FIGURE B)
NOTE: If your Slim 5 does not have the center holes, perform the
following steps:
SLIM 5 SERIES INSTALLATION
SLIM 5 SERIES
RUNNER KITS
5-RS20
5-RS26
FIGURE A
DTRK SERIES
RUNNER KIT
5-RS18
SLIM 5 BOTTOM SHOWN
FIGURE B
CFR/HRF SERIES
RUNNER KITS
5-RS14 (HRF Only)
5-RS16
5-RS18
5-RS20
5-RS23
I-00273 Rev E
DTRK SERIES INSTALLATION
1) Install the runners to the enclosure bottom through the holes shown
using the supplied hardware. (FIGURE C)
FIGURE C
FIGURE D
FIGURE E
FIGURE F
1) Install the runners to the enclosure bottom through the holes shown.
(FIGURE E)
2) Install screws and nuts as shown, side removed for clarity. (FIGURE F)
CFR / HRF SERIES INSTALLATION
2) Install the screws and nuts as shown. The top and bottom of the
CFR / HRF Enclosure are interchangeable. (FIGURE D)
Page 2
WARRANTY
Middle Atlantic Products (the "Company") warrants the 5-RS Series to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return of and
refund of the price paid for, or (b) repair or replacement at the Company's factory of the products purchased, or any part or parts thereof, which the Company has determined to be defective after inspection
thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by parties other than the Company, or any modification or alteration of the products. In addition, this warranty
does not cover damage due to improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE
OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER
PARTY) HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters Middle Atlantic Canada Factory Distribution
Corporate Voice 973-839-1011 - Fax 973-839-1976 Voice 613-836-2501 - Fax 613-836-2690 USA: NJ - CA - IL Canada: ON - BC
International Voice +1 973-839-8821 - Fax +1 973-839-4982 middleatlantic.ca - customerservicecanada@middleatlantic.ca
middleatlantic.com - info@middleatlantic.com
At Middle Atlantic Products we are always listening. Your comments are welcome. Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.