MSI 16 FLEX 8GL-044XDE User Manual

Pro 16 Flex

All-in-One (AIO) PC

MS-A625

iii

Preface

ii

Contents

Copyright and Trademarks Notice ��iii

Revision ��iii

Upgrade and Warranty ��iv

Acquisition of Replaceable Parts ��iv

Technical Support ��iv

Green Product Features ��iv

Environmental Policy �� v

Chemical Substances Information �� v

Battery Information �� v

Safety Instructions ��vi

CE Conformity �� viii

FCC-B Radio Frequency Interference Statement �� viii

WEEE Statement �� viii

RoHS Statement ��ix

Overview.........................................................................................1-1

Packing Contents �� 1-2

System Overview �� 1-3

Component Replacement & Upgrade �� 1-9

Getting Started ...............................................................................2-1

Safety & Comfort Tips �� 2-2

Hardware Setup �� 2-3

System Operations ........................................................................3-1

Power Management �� 3-2

Network Connection (Windows 10) �� 3-4

System Recovery (Windows 10) �� 3-7

System Recovery (F3 Hotkey Recovery) (Optional) �� 3-11

Troubleshooting ...........................................................................A-1

iii

Preface

ii

Copyright and Trademarks Notice

trademark of Micro-Star Int’l Co�, Ltd� All other marks and names mentioned may be

trademarks of their respective owners� No warranty as to accuracy or completeness is

expressed or implied� MSI reserves the right to make changes to this document without

prior notice�

Revision

Revision Date

V1�0 2018/ 08

v

Preface

iv

Upgrade and Warranty

Please note that certain components preinstalled in the product may be upgradable

or replaceable by user’s request� For any further information about the product users

purchased, please contact the local dealer� Do not attempt to upgrade or replace

any component of the product if you are not an authorized dealer or service center,

since it may cause the warranty void� It is strongly recommended that you contact the

authorized dealer or service center for any upgrade or replace service�

Acquisition of Replaceable Parts

Please be noticed that the acquisition of replaceable parts (or compatible ones) of

the product users purchased in certain countries or territories may be ful󰘰lled by

the manufacturer within 5 years at most since the product has been discontinued,

depending on the o󰘲cial regulations declared at the time. Please contact the

manufacturer via http://www�msi�com/support/ for the detailed information about the

acquisition of spare parts�

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s

manual, please contact your place of purchase or local distributor� Alternatively,

please try the following help resources for further guidance� Visit the MSI website for

technical guide, BIOS updates, driver updates and other information via http://www�

msi�com/support/

Green Product Features

◙Reduced energy consumption during use and stand-by

◙Limited use of substances harmful to the environment and health

◙Easily dismantled and recycled

◙Reduced use of natural resources by encouraging recycling

◙Extended product lifetime through easy upgrades

◙Reduced solid waste production through take-back policy

v

Preface

iv

Environmental Policy

◙The product has been designed to enable proper reuse of parts

and recycling and should not be thrown away at its end of life�

◙Users should contact the local authorized point of collection for

recycling and disposing of their end-of-life products�

◙Visit the MSI website and locate a nearby distributor for further recycling

information�

◙Users may also reach us at gpcontdev@msi�com for information regarding

proper Disposal, Take-back, Recycling, and Disassembly of MSI products�

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No� 1907/2006 of the European Parliament and the

Council), MSI provides the information of chemical substances in products at:

http://www�msi�com/html/popup/csr/evmtprtt_pcm�html

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be

disposed of as unsorted household waste� Please use the

public collection system to return, recycle, or treat them in

compliance with the local regulations�

Taiwan:

For better environmental protection, waste batteries should

be collected separately for recycling or special disposal�

California, USA:

The button cell battery may contain perchlorate material and requires special

handling when recycled or disposed of in California�

For further information please visit:

http://www�dtsc�ca�gov/hazardouswaste/perchlorate/

Danger of explosion if battery is incorrectly replaced� Replace only with the

same or equivalent type recommended by the manufacturer�

vii

Preface

vi

Safety Instructions

◙Read the safety instructions carefully and thoroughly�

◙All cautions and warnings on the equipment or user’s manual should be

noted�

Keep the User’s Guide that comes with the package for future reference�

Keep this equipment away from humidity and high temperature�

Lay this equipment on a reliable 󰘱at surface before setting it up.

◙Make sure that the power voltage is within its safety range and has

been adjusted properly to the value of 100~240V before connecting the

equipment to the power outlet� Do not disable the protective earth pin from

the plug� The equipment must be connected to an earthed mains socket-

outlet�

◙Always unplug the AC power cord before installing any add-on card or

module to the equipment�

◙Always disconnect the AC power cord or switch the wall socket o󰘯 if the

equipment would be left unused for a certain time to achieve zero energy

consumption�

◙Rating: 65W, 19V 3�42A

The ventilator on the enclosure is used for air convection and to prevent the

equipment from overheating� Do not cover the ventilator�

Do not leave the equipment in an unconditioned environment with a storage

temperature above 60OC (140OF) or below 0OC (32OF), which may damage the

equipment� NOTE: The maximum operating temperature is around 40OC�

vii

Preface

vi

Never pour any liquid into the opening that could damage or cause electrical

shock�

Place the power cord in a way that people are unlikely to step on it� Do not

place anything on the power cord�

◙When installing the coaxial cable to the TV Tuner, it is necessary to ensure

that the metal shield is reliably connected to protective earthing system of

the building�

◙Cable distribution system should be grounded (earthed) in accordance

with ANSI/NFPA 70, the National Electrical Code (NEC), in particular

Section 820�93, Grounding of Outer Conductive Shield of a Coaxial Cable�

Always keep the strong magnetic or electrical objects away from the

equipment�

If any of the following situations arises, get the equipment checked by service

personnel:

◙The power cord or plug is damaged�

◙Liquid has penetrated into the equipment�

◙The equipment has been exposed to moisture�

◙The equipment does not work well or you can not get it work according to

user’s manual�

◙The equipment has dropped and damaged�

◙The equipment has obvious sign of breakage�

1� The optical storage devices are classi󰘰ed as CLASS 1 LASER PRODUCT. Use of

controls or adjustments or performance of procedures other than those speci󰘰ed

is prohibited�

2� Do not touch the lens inside the drive�

ix

Preface

viii

CE Conformity

Hereby, Micro-Star International CO�, LTD declares that this device is

in compliance with the essential safety requirements and other relevant

provisions set out in the European Directive�

FCC-B Radio Frequency Interference

Statement

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules� These limits are designed to provide reasonable protection

against harmful interference in a residential installation� This

equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications� However, there is no guarantee that

interference will not occur in a particular installation� If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment o󰘯 and on, the user is encouraged to try to correct the

interference by one or more of the measures listed below:

￭Reorient or relocate the receiving antenna�

￭Increase the separation between the equipment and receiver�

￭Connect the equipment into an outlet on a circuit di󰘯erent from that to which

the receiver is connected�

￭Consult the dealer or an experienced radio/television technician for help�

Notice 1

The changes or modi󰘰cations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment�

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to comply

with the emission limits�

This device complies with Part 15 of the FCC Rules� Operation is subject to the

following two conditions:

1� this device may not cause harmful interference, and

2� this device must accept any interference received, including interference that may

cause undesired operation�

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2002/96/EC, which takes e󰘯ect on August

13, 2005, products of “electrical and electronic equipment” cannot be

discarded as municipal waste anymore and manufacturers of covered

electronic equipment will be obligated to take back such products at the

end of their useful life�

ix

Preface

viii

RoHS Statement

Japan JIS C 0950 Material Declaration

A Japanese regulatory requirement, de󰘰ned by speci󰘰cation JIS C 0950, mandates

that manufacturers provide material declarations for certain categories of electronic

products o󰘯ered for sale after July 1, 2006.

http://www�msi�com/html/popup/csr/cemm_jp�html

http://tw�msi�com/html/popup/csr_tw/cemm_jp�html

India RoHS

This product complies with the "India E-waste (Management and Handling) Rule 2011"

and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls

or polybrominated diphenyl ethers in concentrations exceeding 0�1 weight % and 0�01

weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule�

Turkey EEE regulation

Conforms to the EEE Regulations of the Republic Of Turkey

Ukraine restriction of hazardous substances

The equipment complies with requirements of the Technical Regulation, approved

by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057,

in terms of restrictions for the use of certain dangerous substances in electrical and

electronic equipment�

Vietnam RoHS

As from December 1, 2012, all products manufactured by MSI comply with Circular

30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous

substances in electronic and electric products�

1

Overview

This system is designed with green commerce and smart digital lifestyle, using

an LED backlit display to increase clarity, while reducing the burden to the

eyes. With the compact chassis and 󰘱exible base/ stand, it blends technology

with life, making computers easier to use - suitable for both individuals and

businesses�

1-2 1-3

Overview

Packing Contents

All-in-One PC AC/DC Adapter AC Power Cord

Mouse (Optional)Keyboard (Optional)

User Manual &

Quick Guide (Optional)

RJ45 to COM Cable

(Optional)

* Please contact us immediately if any of the items is damaged or missing�

* The illustrations are for reference only and your packing contents may slightly vary

depending on the model you purchased�

1-2 1-3

Overview

System Overview

hFront View

4

121

3

1Microphone (Optional)

The built-in microphone can be used for video chatting online�

2Webcam

The built-in webcam with the microphone can be used for picture taking,

video recoding, online conferencing and any other interactive applications�

3LED Indicator

The LED indicator indicates when it is recording� The LED indicator should

be on when device is capturing video and o󰘯 when the device is not

capturing video�

4Display

The 15�6-inch HD+ display is with an optimal resolution of 1366 X 768

pixels and standard proportion of 16:9 widescreen�

1-4 1-5

Overview

hRear View

1 2 33

1Holder

Use this holder to position your system on a 󰘱at and stable surface.

2Ventilator

The ventilator on the enclosure is used for air convection and to prevent the

equipment from overheating� Do not cover the ventilator�

3Stereo Speakers

The built-in stereo speakers deliver high quality sound with stereo system�

1-4 1-5

Overview

hSide View

2

4

6

5

3

1

1Kensington Lock Port

This AIO PC provides a Kensington lock port, which allows users to secure

the AIO PC in place with a key or some mechanical PIN device and

attached through a rubberised metal cable� The end of the cable has a

small loop which allows the whole cable to be looped around a permanent

object, such as a heavy table or other similar equipment, thus securing the

AIO PC in place�

2Card Reader Drive

The built-in card reader may support various types of memory cards�

3USB 3�1 Gen1 Port (Type-A) (with MSI SuperCharger Technology)

(Optional)

The USB (Universal Serial Bus) port is for attaching USB devices such

as keyboard, mouse, or other USB-compatible devices� It supports up

to 5Gbit/s (SuperSpeed) data transfer rate� The USB 3�1 Gen1 port is

backward-compatible with USB 2�0 devices� With MSI SuperCharger

Technology, not only does it function as normal USB 3�0 port, but it also

enables users to charge USB devices even when the system is turned o󰘯.

1-6 1-7

Overview

4USB 3�1 Gen1 Port (Type-A)

The USB (Universal Serial Bus) port is for attaching USB devices such

as keyboard, mouse, or other USB-compatible devices� It supports up to

5Gbit/s (SuperSpeed) data transfer rate� The USB 3�1 Gen1 Port and is

backward-compatible with USB 2�0 devices�

5HDMI-Out Port

The High-De󰘰nition Multimedia Interface (HDMI) is an all-digital audio/video

interface capable of transmitting uncompressed streams� HDMI supports

all TV format, including standard, enhanced, or high-de󰘰nition video, plus

multi-channel digital audio on a single cable�

6Line-Out Jack

This connector is provided for headphones or speakers�

1-6 1-7

Overview

hTop & Bottom View

1 3 5

2 4

6 8

7

1Brightness Down Button

Press this button to tune the brightness down�

2Brightness Up Button

Press this button to tune the brightness up�

3Hard Disk Drive LED

This indicator shows the activity status of the HDD. It 󰘱ashes when the

system is accessing data on the HDD and remains o󰘯 when no disk activity

is detected�

4Monitor Power LED

The power LED glows when the monitor is turned on and goes o󰘯 when the

monitor is shut down�

5System Power Button

Press the system power button to turn the system on or o󰘯.

1-8 1-9

Overview

6Power Jack

The AC/DC adapter converts AC power to DC power for this jack� Power

supplied through this jack supplies power to the PC� To prevent damage to

the PC, always use the supplied power adapter�

7USB 2�0 Port (Optional)

The USB (Universal Serial Bus) port is for attaching USB devices such

as keyboard, mouse, or other USB-compatible devices� It supports up to

480Mbit/s (Hi-Speed) data transfer rate�

Serial Port (8-pin RJ45) (Optional)

The serial port supports barcode scanners, barcode printers, bill printers,

credit card machine, etc�

8RJ-45 LAN Jack

The standard RJ-45 LAN jack is provided for connection to the Local Area

Network (LAN)� You can connect a network cable to it�

Yellow Green/ Orange

LED Color LED State Condition

Left Yellow O󰘯 LAN link is not established�

On (steady state) LAN link is established�

On (blinking) The computer is communicating with

another computer on the LAN�

Right Green O󰘯 10 Mbit/sec data rate is selected�

On 100 Mbit/sec data rate is selected�

Orange On 1000 Mbit/sec data rate is selected�

Important

1. We suggest that you connect the AC/DC adapter to your AIO PC 󰘰rst and then

connect the AC power cord to the socket-outlet for safety concerns�

2� High-speed devices are recommended for USB 3�1 ports whereas low-speed

devices, such as mouse or keyboard, are suggested to be plugged into the USB 2�0

ports�

1-8 1-9

Overview

Component Replacement & Upgrade

Please note that certain components preinstalled in the product may be upgradable or

replaceable by user’s request depending on the models users purchased�

For any further information on the product users purchased, please contact the local

dealer� Do not attempt to upgrade or replace any component of the product if you are

not an authorized dealer or service center, since it may cause the warranty void� It is

strongly recommended that you contact the authorized dealer or service center for any

upgrade or replace service�

2

Getting Started

This chapter provides you with the information on hardware setup procedures�

While connecting peripheral devices, be careful in holding the devices and use

a grounded wrist strap to avoid static electricity�

2-2 2-3

Getting Started

Safety & Comfort Tips

The AIO PC is a portable platform that allows you to work anywhere� However,

choosing a good workspace is important if you have to work with your PC for a long

period of time�

1� Your work area should have enough illumination�

2� Choose the proper desk and chair and adjust their height to 󰘰t your posture when

operating�

3� When sitting on the chair, sit straight and keep a good posture� Adjust the chair’s

back (if available) to support your back comfortably�

4� Place you feet 󰘱at and naturally on the 󰘱oor, so that your knees and elbows have

the proper position (about 90-degree) when operating�

5� Put your hands on the desk naturally to support your wrists�

6� Adjust the angle/position of the AIO PC to have an optimal view�

7� Avoid using your PC in a place where discomfort may occur (such as on the bed)�

8� The AIO PC is an electrical device� Please treat it with great care to avoid

personal injury�

38-7 6 cm

15- 20

90-120

1

2

3

4

5

6

2-2 2-3

Getting Started

Hardware Setup

Important

•

The illustrations are for reference only� Your system may vary in appearance�

•

Please make sure the system has been grounded to earth through the AC power

cord and the electrical outlet before powering on the system�

•

Do not use any sharp objects on the display�

1� Pull the holder open and tilt the monitor� To stabilize the system, make sure that

the holder has been pulled until the mark on its hinge aligns to the bottom of the

system�

2� Proper positioning helps to reduce your eye strain and muscle fatigue as well�

2-4 PB

Getting Started

3� Connect the adapter to the system and plug in the power cord�

4� Press the power button to power on the system�

3

System Operations

This chapter provides you with essential information on system operations�

Important

All information is subject to change without prior notice�

System Operations

3-33-2

Power Management

Power management of personal computers (PCs) and monitors has the potential to

save signi󰘰cant amounts of electricity as well as deliver environmental bene󰘰ts.

To be energy e󰘲cient, turn o󰘯 your display or set your PC to sleep mode after a period

of user inactivity�

hPower Management in Windows 10

■[Power Options] in Windows OS allow you to control the power management

features of your display, hard drive, and battery� Right-click [Start] , select

[Control Panel] from the list and then click [System and Security]�

Select [Power Options] and choose a power plan that suits your personal

needs. You may also 󰘰ne-tune the settings by clicking [Change plan settings].

■The Shut Down Computer menu presents the options of Sleep (S3/S4) & Shut

Down (S5) for rapid and easy management of your system power�

hPower Management through ENERGY STAR quali󰄈ed

monitors

The power management feature allows the computer to initiate

a low-power or “Sleep” mode after a period of user inactivity�

When used with an external ENERGY STAR quali󰘰ed monitor,

this feature also supports similar power management features

of the monitor� To take advantage of these potential energy

savings, the power management feature has been preset to

behave in the following ways when the system is operating on AC power:

■ Turn o󰘯 the display after 10 minutes

■Initiate Sleep after 30 minutes

System Operations

3-33-2

hWaking the System Up

The computer shall be able to wake up from power saving mode in response to a

command from any of the following:

■the power button,

■the network (Wake On LAN),

■the mouse,

■the keyboard�

Energy Saving Tips:

■ Turn o󰘯 the monitor by pressing the monitor power button after a period of

user inactivity�

■Tune the settings in Power Options under Windows OS to optimize your PC’s

power management�

■Install power saving software to manage your PC’s energy consumption�

■ Always disconnect the AC power cord or switch the wall socket o󰘯 if your PC

would be left unused for a certain time to achieve zero energy consumption�

System Operations

3-53-4

Network Connection (Windows 10)

hWired Network

1� Right-click [Start] and select [Network Connections] from the list�

2� Select [Ethernet] and then [Network and Sharing Center]�

3� Select [Set up a new connection or network]�

System Operations

3-53-4

4� Choose [Connect to the Internet] and click [Next]�

5� Select [Broadband (PPPoE)] to connect using DSL or cable that requires a user

name and password�

6� Type the information from your Internet Service Provider (ISP) and click [Connect]

to establish your LAN connection�

System Operations

3-73-6

hWireless Network

1� Go to [Start] , click [Settings] and select [Network and Internet]�

2� A list of available WLAN connections pops up� Choose a connection from the list�

3� To establish a new connection, select [Network and Sharing Center]�

4� Select [Set up a new connection or network]�

5� Followingly, choose [Manually connect to a wireless network] and click [Next] to

continue�

6� Enter information for the wireless network you intend to add and click [Next] to

proceed�

7� A new WLAN connection has been made�

System Operations

3-73-6

System Recovery (Windows 10)

The purposes for using the System Recovery Function may include:

■Restore the system back to the initial status of original manufacturer’s default

settings�

■When some errors have occurred to the operating system in use�

■ When the operating system is a󰘯ected by virus and is not able to work

normally�

■When you want to install the OS with other built-in languages�

Before using the System Recovery Function, please back up the important data saved

on your system drive to other storage devices�

If the following solution fails to recover your system, please contact the authorized

local distributor or service center for further assistance�

System Operations

3-93-8

Reset this PC

1� Go to [Start] , click [Settings] and select [Update and security]�

2� Select [Recovery] and click [Get started] under [Reset this PC] to start the system

recovery�

3. The [Choose an option] screen pops up. Choose between [Keep my 󰘰les] and

[Remove everything]�

Reset this PC

Keep my 󰘰les

Remove everything

Only the drive where

Windows is installed

Just remove my 󰘰les

Remove 󰘰les and clean the drive

All drives Just remove my 󰘰les

Remove 󰘰les and clean the drive

System Operations

3-93-8

hKeep my 󰄈les

1. Select [Keep my 󰘰les].

2� The [Your apps will be removed] screen shows a list of apps that will need to be

reinstalled from the web or installation discs� Click [Next] to continue�

3� The next screen will show the changes to be made during the process� Click [Reset]

to start the system reset�

System Operations

3-113-10

hRemove everything

1� Select [Remove everything]�

2� If you have multiple hard drives, a screen will pop up, asking you to choose between

[Only the drive where Windows is installed] and [All drives]�

3. Then select between [Just remove my 󰘰les] and [Remove 󰘰les and clean the drive].

4� The next screen will show the changes to be made during the process� Click [Reset]

to start the system reset�

System Operations

3-113-10

System Recovery (F3 Hotkey Recovery)

(Optional)

hPrecautions for Using the System Recovery Function

1� If your hard drive and system encountered non-recoverable problems, please use

the F3 Hotkey recovery from the Hard Drive 󰘰rst to perform the System Recover

Function�

2� Before using the System Recovery Function, please backup the important data

saved on your system drive to other storage devices�

hRecovering the system with the F3 Hotkey

Follow the instructions below to continue:

1� Restart the PC�

2� Press the F3 hotkey on the keyboard promptly when the MSI greeting appears on

the display�

3� On the “Choose an Option” screen, tap “Troubleshoot”�

4� On the “Troubleshoot” screen, tap “Restore MSI factory” to reset the system to the

default settings�

5� On the “RECOVERY SYSTEM” screen, tap “System Partition Recovery”�

6� Follow the on-screen instructions to continue and complete the Recovery Function�

A

Troubleshooting

A-2 A-3

Troubleshooting

My system does not start�

1� Check if the system is connected to an electrical outlet and it is turned on�

2. Check if the power cord and all cables are connected 󰘰rmly.

When I turn on my computer, the message “Operating System not found”

appears or Windows does not start�

1� Check if there is a non-bootable CD/ DVD inside the optical disk drive� If so,

remove the CD/ DVD then restart the computer�

2� Check Boot Device Priority settings in the BIOS Setup�

The system can not be shut down�

It is best to shut down your computer using the Shut Down icon in the operating

system� Using other methods, including those listed below, may result in data

failure� If the Shut Down procedure does not work, choose one of the following

steps:

1� Press Ctrl+Alt+Del keys, then choose Shut Down�

2. Press and hold the power button till the system is o󰘯.

3� Unplug the power cable from the system�

My microphone does not work�

1� For built-in microphone, please go to Start > Control Panel > Sounds and Audio

Devices > Audio to check if it is muted�

2� If you are using an external microphone, check that the microphone is plugged

into the Microphone jack�

The Internet connection has problems�

1� If you are having a problem connecting to your Internet Service Provider (ISP),

check if the ISP is experiencing technical problems�

2� Check the Network settings and connection and make sure the system is

properly con󰘰gured to Internet access.

3. The wireless LAN data transfer speed is a󰘯ected by distance and obstructions

between devices and access points� To maximize the data transfer speed,

choose the access point closest to your system�

A-2 A-3

Troubleshooting

System speakers do not work�

1� Check the master volume setting in the Audio Mixer�

2� If you are using an application that has its own volume control, check if the

volume is muted�

3� If you have connected an audio cable to the Headphone jack, disconnect it�

4� If the system has OSD function, please adjust the volume of OSD�

System monitor does not display anything�

1� Check if the system is connected to an electrical outlet and it is turned on�

2� The system may be in Standby mode� Press any key to activate the Display�

Table of Contents

MSI 16 FLEX 8GL-044XDE User Manual

Related Manuals

MSI 16 Flex-002XDE Manual

MSI 16B Flex-001XEU Manual

MSI 16 Flex-004EU Manual

MSI 16B Flex-005XEU Manual

MSI PRO 16 FLEX-017XEU Manual

MSI 16 Flex 8GL-001XEU Manual

MSI 16 Flex 8GL-002XEU Manual

MSI 16 Flex 8GL-024XEU Manual