MSI G241VC User Manual
Displayed below is the user manual for G241VC by MSI which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
All specifications and informations are subject to change without notice.
-1-
Please always place
this device on a stable
surface; otherwise,
it may fall and be
damaged.
The altitude and the
tropical environment
the adapter fits depend
on which adapter is
used for the device.
The rating plate on
the back of the device
with the above warning
sign indicates that
t h i s p r o d u c t i s
app lica ble for the
safe use of the region
w i t h a l t i t u d e o f
2,000m and below.
Do not hold the plug
w i t h w e t h a n d ;
otherwise, electric
shock may occur.
Make sure the plug
has a good touch
because poor touch
may cause fire.
Do not use a broken
power plug nor keep
a power cord near heat
source; otherwise,
e l e ct r i c s h oc k or
fire may occur.
When cleaning the
device, be sure to
remove the power
plug, use a piece
of soft cloth rather
t h a n i n d u s t r i a l
che mica l to cle an
the device, be sure
not to let water enter
the device.
Do not disassemble
this device without
permission. In case
of failure, be sure to
contact a professional
servicing person to
fix it. The unauthorized
disassembly of this
device may result
in electric shock or
fire.
In case of rare smell
or noise out of this
device, be sure to
immediately cut off
the power supply and
ask a professional
servicing person to
fix the problem.
When this device
is idle for long time,
be sure to power it
off; otherwise, electric
shock or fire may
occur.
I.Safety Prevention Measures
Note:
The device with AC switch may use such AC switch as cut-off component.
The device without AC switch may use power plug or coupler as cut-off component.
In case of the normal use of the equipment, make sure the cut-off component
can be accessed easily.
All specifications and informations are subject to change without notice.
-1-
Please always place
this device on a stable
surface; otherwise,
it may fall and be
damaged.
The altitude and the
tropical environment
the adapter fits depend
on which adapter is
used for the device.
The rating plate on
the back of the device
with the above warning
sign indicates that
t h i s p r o d u c t i s
app lica ble for the
safe use of the region
w i t h a l t i t u d e o f
2,000m and below.
Do not hold the plug
w i t h w e t h a n d ;
otherwise, electric
shock may occur.
Make sure the plug
has a good touch
because poor touch
may cause fire.
Do not use a broken
power plug nor keep
a power cord near heat
source; otherwise,
e l e ct r i c s h oc k or
fire may occur.
When cleaning the
device, be sure to
remove the power
plug, use a piece
of soft cloth rather
t h a n i n d u s t r i a l
che mica l to cle an
the device, be sure
not to let water enter
the device.
Do not disassemble
this device without
permission. In case
of failure, be sure to
contact a professional
servicing person to
fix it. The unauthorized
disassembly of this
device may result
in electric shock or
fire.
In case of rare smell
or noise out of this
device, be sure to
immediately cut off
the power supply and
ask a professional
servicing person to
fix the problem.
When this device
is idle for long time,
be sure to power it
off; otherwise, electric
shock or fire may
occur.
I.Safety Prevention Measures
Note:
The device with AC switch may use such AC switch as cut-off component.
The device without AC switch may use power plug or coupler as cut-off component.
In case of the normal use of the equipment, make sure the cut-off component
can be accessed easily.
All specifications and informations are subject to change without notice.
-2-
II.Installation Instructions
1.Accessories
Power cord
Signal cable
User manual
Base/Stand
Warranty card
(The above pictures are for illustration only and the physical accessories shall govern.)
2. Angle Adjustment
2.1 The screen can be adjusted by
inclining f orward and backward;
however, the specific adjustment
depends on the specific model of
the dev i c e . Generally, i t may be
inclined 5 ± 2 °forward and 1 5 ±2°
backward.
2.2 When adjusting the angle of the
monitor, be sure not to touch or press
the area of the screen.
(The above pictures are for illustration only and the physical accessories shall govern.)
All specifications and informations are subject to change without notice.
-3-
III. Connect the Monitor to PC
(The above pictures are for illustration only and the physical accessories shall govern.)
123
Before connecting the LCD monitor to the PC, please power down the PC and
the monitor.
Model with inbuilt power supply
* Warning: Always use the power
cord of standard configuration.
2
3
Power Plug
Connect the power cord of the monitor into
the POWER port in the back of the monitor.
VGA Port
Connect the VGA cable into the VGA IN port
in the back of the monitor (this needs the
support of the monitor).
HDMI Port
Connect the HDMI cable into the HDMI IN
port into the back of the monitor (this needs
the support of the monitor).
1
All specifications and informations are subject to change without notice.
-2-
II.Installation Instructions
1.Accessories
Power cord
Signal cable
User manual
Base/Stand
Warranty card
(The above pictures are for illustration only and the physical accessories shall govern.)
2. Angle Adjustment
2.1 The screen can be adjusted by
inclining f orward and backward;
however, the specific adjustment
depends on the specific model of
the dev i c e . Generally, i t may be
inclined 5 ± 2 °forward and 1 5 ±2°
backward.
2.2 When adjusting the angle of the
monitor, be sure not to touch or press
the area of the screen.
(The above pictures are for illustration only and the physical accessories shall govern.)
All specifications and informations are subject to change without notice.
-3-
III. Connect the Monitor to PC
(The above pictures are for illustration only and the physical accessories shall govern.)
123
Before connecting the LCD monitor to the PC, please power down the PC and
the monitor.
Model with inbuilt power supply
* Warning: Always use the power
cord of standard configuration.
2
3
Power Plug
Connect the power cord of the monitor into
the POWER port in the back of the monitor.
VGA Port
Connect the VGA cable into the VGA IN port
in the back of the monitor (this needs the
support of the monitor).
HDMI Port
Connect the HDMI cable into the HDMI IN
port into the back of the monitor (this needs
the support of the monitor).
1
All specifications and informations are subject to change without notice.
-4-
IV. User Setup
1. Schematic Diagram of Keys
M
E
1 2 3 4 5 6
2. Description of Keys' Functions
Note: The physical keys of the specific model shall govern.
LED
indicator
light
1.
2.
3.
4.
6.
5.
Pops up the menu/Backs to the previous menu (in case of main menu,
exits from the whole menu).
When the menu is activated, used as the left function selection key,
and decreases progressively the value of the progress bar; when the
menu is inactivated, used as the specified shortcut mode hot key (for
sighting device).
When the menu is activated, used as the right function selection key,
and increases progressively the value of the progress bar; when the
menu is inactivated, used as the specified shortcut mode hot key
(FPS/RTS mode).
If the menu is activated, chooses the corresponding function.
Power switch: Powers on/off the monitor.
Blue: in normal switch-on state; flickering in blue: in power-saving state.
M
E
▲
▲
V. Operation Menu (OSD) Function Descriptions
All specifications and informations are subject to change without notice.
-5-
NONE
NONE Adjust display contrast
DCR
On Activate dynamic contrast
Off Inactive dynamic contrast
Return Return to the previous menu
Exit
Exit from the whole menu
Normal work mode
Adjust display brightness
NONE
NONE
NONE
NONE
NONE
NONE
Contrast
Brightness
NONENONE
NONENONE
NONE
NONE
NONE
NONE
Standard
Movie
FPS
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
RTS
EyeSaver
Return
Exit
Cool
Warm
Mode
Color Temp.User
Return
Exit
Auto
16:9
4:3
Return
Exit
VGA
HDMI
Return
Exit
Aspect
Input
Red
Green
Blue
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
Movie mode
FPS game mode
RTS game mode
Eye protection ray filter application mode
Fine tuning of red color temperature
Return to the previous menu
Exit from the whole menu
Set as cold color temperature
Set as warm color temperature
Fine tuning of green color temperature
Fine tuning of blue color temperature
Return to the previous menu
Exit from the whole menu
Automatically adjust picture aspect ratio
Picture in 16:9 mode
Picture in 4:3 mode
Return to the previous menu
Exit from the whole menu
VGA (digital) signal input
HDMI (digital) signal input
Return to the previous menu
Exit from the whole menu
First level
menu icon
Third level
menu icon
Second
level
menu icon
First level
menu item
Second level
menu item
Third level
menu item Description
Adjust Gamma1
Gamma2
Return
Exit
Gamma
Adjust color tone brightness grey 1
Adjust color tone brightness grey 2
Return to the previous menu
Exit from the whole menu
Automatically adjust the horizontal/vertical
location, focusing and clock of pictures
Adjust the white balance of pictures
NONE
NONE
NONE
NONE
Auto
adjust
Auto color
All specifications and informations are subject to change without notice.
-4-
IV. User Setup
1. Schematic Diagram of Keys
M
E
1 2 3 4 5 6
2. Description of Keys' Functions
Note: The physical keys of the specific model shall govern.
LED
indicator
light
1.
2.
3.
4.
6.
5.
Pops up the menu/Backs to the previous menu (in case of main menu,
exits from the whole menu).
When the menu is activated, used as the left function selection key,
and decreases progressively the value of the progress bar; when the
menu is inactivated, used as the specified shortcut mode hot key (for
sighting device).
When the menu is activated, used as the right function selection key,
and increases progressively the value of the progress bar; when the
menu is inactivated, used as the specified shortcut mode hot key
(FPS/RTS mode).
If the menu is activated, chooses the corresponding function.
Power switch: Powers on/off the monitor.
Blue: in normal switch-on state; flickering in blue: in power-saving state.
M
E
▲
▲
V. Operation Menu (OSD) Function Descriptions
All specifications and informations are subject to change without notice.
-5-
NONE
NONE Adjust display contrast
DCR
On Activate dynamic contrast
Off Inactive dynamic contrast
Return Return to the previous menu
Exit
Exit from the whole menu
Normal work mode
Adjust display brightness
NONE
NONE
NONE
NONE
NONE
NONE
Contrast
Brightness
NONENONE
NONENONE
NONE
NONE
NONE
NONE
Standard
Movie
FPS
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
RTS
EyeSaver
Return
Exit
Cool
Warm
Mode
Color Temp.User
Return
Exit
Auto
16:9
4:3
Return
Exit
VGA
HDMI
Return
Exit
Aspect
Input
Red
Green
Blue
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
NONE
Movie mode
FPS game mode
RTS game mode
Eye protection ray filter application mode
Fine tuning of red color temperature
Return to the previous menu
Exit from the whole menu
Set as cold color temperature
Set as warm color temperature
Fine tuning of green color temperature
Fine tuning of blue color temperature
Return to the previous menu
Exit from the whole menu
Automatically adjust picture aspect ratio
Picture in 16:9 mode
Picture in 4:3 mode
Return to the previous menu
Exit from the whole menu
VGA (digital) signal input
HDMI (digital) signal input
Return to the previous menu
Exit from the whole menu
First level
menu icon
Third level
menu icon
Second
level
menu icon
First level
menu item
Second level
menu item
Third level
menu item Description
Adjust Gamma1
Gamma2
Return
Exit
Gamma
Adjust color tone brightness grey 1
Adjust color tone brightness grey 2
Return to the previous menu
Exit from the whole menu
Automatically adjust the horizontal/vertical
location, focusing and clock of pictures
Adjust the white balance of pictures
NONE
NONE
NONE
NONE
Auto
adjust
Auto color
All specifications and informations are subject to change without notice.
-6-
Note: The functions may be adjusted due to specific model or the upgrade of software version.
The physical model shall govern.
ON
Return
Exit
On
Off
Return
Exit
YES
NO
Return
Exit
Other
Language
Power
Off
Reset
Return to the previous menu
Exit from the whole menu
Automatically turn off after saving
power for 1min
Inactivate the function of timed
switch-off
Return to the previous menu
Exit from the whole menu
Reset to factory setup
Exit from this function
Return to the previous menu
Exit from the whole menu
English
Française
Deutsch
Español
English
Deutsch
Español
Française
English
Française
Deutsch
Español
Return
Exit
NONE
NONE
NONE
NONE
NONE
NONE
Return
Exit
Exit NONENONE
Return to the previous menu
Exit from the whole menu
Return to the previous menu
Exit from the whole menu
Exit from the whole menu
Over
driver
Italiano Italiano Italiano
First level
menu icon
Third level
menu icon
Second
level
menu icon
First level
menu item
Second level
menu item
Third level
menu item Description
Normal mode
Extreme
OD general mode, reduce
motion blur
OD extra-high mode, reduce
motion blur
Normal
Off
繁中 繁中 繁體中文
All specifications and informations are subject to change without notice.
-7-
VI. FAQ
Faults occurring
The power indicator
light is not on
Possible solutions
Dimming picture
Flickering picture or
picture with ripples
Color shortage
(red, green and blue)
Picture with color difference
(white looks not white)
◆Check if the power is on.
◆Check if the power cord is connected.
◆Adjust brightness and contrast.
◆
with electronic disturbance.
There may be electrical appliances or equipment
The power indicator
light is on (flickering),
but the monitor has no
pictures.
◆
◆ Check if the PC display card is inserted properly.
◆ Check if the signal cable of the monitor is correctly
connected with the PC.
◆ Check the signal cable plug of the monitor and make
sure every pin has no bending.
◆ Observe the indicator light by pressing the Caps
Lock key on the PC keyboard and check if the PC
is working.
Check if the PC power is on.
◆
sure every pin has no bending.
Check the signal cable of the monitor and make
◆ Adjust RGB color or reselect color temperature.
◆
is compatible with PC.
◆Check if the display card is compatible with the
plug-and-play function.
Check if the function of plug-and-play of the device
Impossible plug-and-play
Please confirm the default values of the output dynamic range and the pixel
format in the graphics Settings is "all". when the brightness of the screen is
higher than usual.
All specifications and informations are subject to change without notice.
-6-
Note: The functions may be adjusted due to specific model or the upgrade of software version.
The physical model shall govern.
ON
Return
Exit
On
Off
Return
Exit
YES
NO
Return
Exit
Other
Language
Power
Off
Reset
Return to the previous menu
Exit from the whole menu
Automatically turn off after saving
power for 1min
Inactivate the function of timed
switch-off
Return to the previous menu
Exit from the whole menu
Reset to factory setup
Exit from this function
Return to the previous menu
Exit from the whole menu
English
Française
Deutsch
Español
English
Deutsch
Español
Française
English
Française
Deutsch
Español
Return
Exit
NONE
NONE
NONE
NONE
NONE
NONE
Return
Exit
Exit NONENONE
Return to the previous menu
Exit from the whole menu
Return to the previous menu
Exit from the whole menu
Exit from the whole menu
Over
driver
Italiano Italiano Italiano
First level
menu icon
Third level
menu icon
Second
level
menu icon
First level
menu item
Second level
menu item
Third level
menu item Description
Normal mode
Extreme
OD general mode, reduce
motion blur
OD extra-high mode, reduce
motion blur
Normal
Off
繁中 繁中 繁體中文
All specifications and informations are subject to change without notice.
-7-
VI. FAQ
Faults occurring
The power indicator
light is not on
Possible solutions
Dimming picture
Flickering picture or
picture with ripples
Color shortage
(red, green and blue)
Picture with color difference
(white looks not white)
◆Check if the power is on.
◆Check if the power cord is connected.
◆Adjust brightness and contrast.
◆
with electronic disturbance.
There may be electrical appliances or equipment
The power indicator
light is on (flickering),
but the monitor has no
pictures.
◆
◆ Check if the PC display card is inserted properly.
◆ Check if the signal cable of the monitor is correctly
connected with the PC.
◆ Check the signal cable plug of the monitor and make
sure every pin has no bending.
◆ Observe the indicator light by pressing the Caps
Lock key on the PC keyboard and check if the PC
is working.
Check if the PC power is on.
◆
sure every pin has no bending.
Check the signal cable of the monitor and make
◆ Adjust RGB color or reselect color temperature.
◆
is compatible with PC.
◆Check if the display card is compatible with the
plug-and-play function.
Check if the function of plug-and-play of the device
Impossible plug-and-play
Please confirm the default values of the output dynamic range and the pixel
format in the graphics Settings is "all". when the brightness of the screen is
higher than usual.
All specifications and informations are subject to change without notice.
-8-
Diagonal
dimensions
VII. Product Specifications
Picture
aspect ratio
Picture
dimensions (mm) Dot distance (mm) Optimal
resolution
60cm(23.6″) 16:9 521.4*293.28 0.27156x0.27156 1920*1080
Note: The actual application of the above parameters shall be subject to the
specific model.
VIII. Table of Product Preset Modes
16:9
Display
dimensions Aspect ratio Preset resolution/Refresh rate
In HDMI connection mode
Note: The actual application of the above parameters shall be subject to the
specific model.
In VGA connection mode
Ambient
temperature
Humidity
Storage
temperature
Working
temperature
RH for operation
-20℃ to 60℃
5℃ to 40℃
20% to 80%
( )
60/75Hz
(56/60/72/
)
75Hz
(60/72/
)
75Hz
( )
70Hz
(60/70/
)
75Hz
( )
60Hz
23.6"
16:9
Display
dimensions Aspect ratio Preset resolution/Refresh rate
( )
60Hz
( )
60/75Hz
(56/60/72/
)
75Hz
(60/72/
)
75Hz
( )
70Hz
(60/70/
)
75Hz
( )
60/75Hz
1680X1050
( )
60Hz
23.6"
1920x1080
1920x1080
1600X900
( )
60Hz
( )
60Hz
1360X768
All specifications and informations are subject to change without notice.
-8-
Diagonal
dimensions
VII. Product Specifications
Picture
aspect ratio
Picture
dimensions (mm) Dot distance (mm) Optimal
resolution
60cm(23.6″) 16:9 521.4*293.28 0.27156x0.27156 1920*1080
Note: The actual application of the above parameters shall be subject to the
specific model.
VIII. Table of Product Preset Modes
16:9
Display
dimensions Aspect ratio Preset resolution/Refresh rate
In HDMI connection mode
Note: The actual application of the above parameters shall be subject to the
specific model.
In VGA connection mode
Ambient
temperature
Humidity
Storage
temperature
Working
temperature
RH for operation
-20℃ to 60℃
5℃ to 40℃
20% to 80%
( )
60/75Hz
(56/60/72/
)
75Hz
(60/72/
)
75Hz
( )
70Hz
(60/70/
)
75Hz
( )
60Hz
23.6"
16:9
Display
dimensions Aspect ratio Preset resolution/Refresh rate
( )
60Hz
( )
60/75Hz
(56/60/72/
)
75Hz
(60/72/
)
75Hz
( )
70Hz
(60/70/
)
75Hz
( )
60/75Hz
1680X1050
( )
60Hz
23.6"
1920x1080
1920x1080
1600X900
( )
60Hz
( )
60Hz
1360X768