Table of Contents
MSI G242 User Manual
Displayed below is the user manual for G242 by MSI which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Optix Series
LCD Monitor
Optix G242 (3BA4)
Optix G242P (3BA4)
Optix G272 (3CB5)
2Contents
Contents
Getting Started .............................................................................................................. 3
Package Contents ................................................................................................... 3
Installing the Monitor Stand ................................................................................... 4
Adjusting the Monitor ............................................................................................. 6
Monitor Overview .................................................................................................... 8
Connecting the Monitor to PC .............................................................................. 11
OSD Setup ................................................................................................................... 13
Navi Key ................................................................................................................ 13
Hot Key .................................................................................................................. 14
OSD Menus.................................................................................................................. 15
Gaming .................................................................................................................. 15
Professional .......................................................................................................... 17
Image .................................................................................................................... 18
Input Source ......................................................................................................... 19
Navi Key ................................................................................................................ 19
Setting ................................................................................................................... 20
Specifications .............................................................................................................. 21
Preset Display Modes ................................................................................................ 23
Troubleshooting.......................................................................................................... 26
Safety Instructions ...................................................................................................... 27
Regulatory Notices ..................................................................................................... 28
Revision
V1.0, 2020/11
3
Getting Started
Getting Started
This chapter provides you with the information on hardware setup procedures. While
connecting devices, be careful in holding the devices and use a grounded wrist strap
to avoid static electricity.
Package Contents
Monitor
Optix G242 (3BA4)
Optix G242P (3BA4)
Optix G272 (3CB5)
Documentation
Quick Start Guide
Registration Card
Warranty Card
Accessories
Stand with Screw(s)
Stand Base with Screw(s)
Stand Cover with Screw(s)
Power Cord
Power Adapter
Cables HDMI Cable (Optional)
⚠
Important
∙
Contact your place of purchase or local distributor if any of the items is damaged or
missing.
∙
Package contents may vary by country.
4Getting Started
Installing the Monitor Stand
⚠
Important
∙
Place the monitor on a soft, protected surface to avoid scratching the display panel.
∙
Do not use any sharp objects on the panel.
∙
The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit.
Optix G242P
1. Leave the monitor in its protective foam packaging. Align the stand to the monitor
groove.
2. Tighten the stand with screws.
3. Connect the stand base to the stand and tighten the screw to secure the stand
base.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.
1
2
3
5
Getting Started
Optix G242/ Optix G272
1. Leave the monitor in its protective foam packaging. Align the stand to the monitor
groove. Tighten the stand with screws.
2. Connect the stand base to the stand and tighten the screw to secure the stand
base.
3. Align the latches to place the stand cover.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.
1
2
3
6Getting Started
Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment
capabilities.
⚠
Important
∙
Avoid touching the display panel when adjusting the monitor.
∙
Please slightly tilt the monitor backwards before pivoting it.
Optix G242P
130mm
-5
O
20
O
45 O
90
O
90
O
45 O
7
Getting Started
Optix G242/ Optix G272
-5
O
20
O
8Getting Started
Monitor Overview
Optix G242P
234
56 7 8
1
6
9
Getting Started
Optix G242/ Optix G272
24
56 7 8
1
6
10 Getting Started
1Power Button
2Navi Key
3Cable Routing Hole
4Kensington Lock
5Power Jack
6HDMI 1.4 Port
7DisplayPort
8Headphone Jack
11
Getting Started
Connecting the Monitor to PC
1. Turn off your computer.
2. Connect the video cable from the monitor to your computer.
3. Assemble the monitor power adapter & power cord. (Figure A)
4. Connect the power adapter to the monitor power jack. (Figure B)
5. Plug the power cord into the electrical outlet. (Figure C)
6. Turn on the monitor. (Figure D)
7. Power on the computer and the monitor will auto detect the signal source.
Optix G242P
A
B
C
D
12 Getting Started
Optix G242/ Optix G272
A
B
C
D
13
OSD Setup
OSD Setup
This chapter provides you with essential information on OSD Setup.
⚠
Important
All information is subject to change without prior notice.
Navi Key
The monitor comes with a Navi Key, a multi-directional control that helps navigate the
On-Screen Display (OSD) menu.
Optix G242P
14 OSD Setup
Optix G242/ Optix G272
Up/Down/Left/Right:
∙selecting function menus and items
∙adjusting function values
∙entering into/exiting from function menus
Press (OK):
∙launching the On-Screen Display (OSD)
∙entering submenus
∙confirming a selection or setting
Hot Key
∙Users may enter into Game Mode, Screen Assistance, Alarm Clock and Input Source
function menus by moving the Navi Key up, down, left or right when the OSD menu
is inactive.
∙Users may customize their own Hot Keys to enter into different function menus.
15
OSD Menus
OSD Menus
Gaming
1st Level Menu 2nd/3rd Level Menu Description
Game Mode User ∙All items can be adjusted by users.
∙Use Up or Down Button to select and
preview mode effects.
∙Press the OK Button to confirm and
apply your mode type.
FPS
Racing
RTS
RPG
Night Vision OFF ∙This function optimizes background
brightness and is recommended for
FPS games.
Normal
Strong
Strongest
A.I.
Response Time Normal ∙Users can adjust Response Time in
any mode.
∙Response Time will be grayed out
while Anti Motion Blur is enabled.
∙Response Time have to set to Fast
after Anti Motion Blur is disabled.
Fast
Fastest
16 OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
Anti Motion
Blur
OFF ∙When Anti Motion Blur is enabled,
HDCR and Brightness cannot be
enabled and will be grayed out.
∙Response time will be grayed out
while Anti Motion Blur is enabled.
∙Anti Motion Blur has to be disabled
while Adaptive-Sync is set to ON.
ON
Refresh Rate Location Left Top ∙Users can adjust Refresh Rate in any
mode.
∙Default Refresh Rate Location is
Left Top. Location is adjustable in
OSD Menu. Press the OK Button to
confirm and apply your Refresh Rate
Location.
∙This monitor follows and works at the
Operating System’s preset Screen
Refresh Rate.
Right Top
Left
Bottom
Right
Bottom
OFF
ON
Alarm Clock Location Left Top ∙Users can adjust Alarm Clock in any
mode.
∙After setting the time, press the OK
Button to activate the timer.
∙Default Alarm Clock Location is
Left Top. Users can select their own
location.
Right Top
Left
Bottom
Right
Bottom
OFF
15:00 00:01 ~
99:59
30:00
45:00
60:00
Screen
Assistance
None ∙Users can adjust Screen Assistance
in any mode.
∙Screen Assistance default is None.
17
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
Adaptive-Sync OFF ∙Adaptive-Sync prevents screen
tearing.
∙DisplayPort or HDMI default is OFF
and can be adjusted ON/OFF in any
mode, any resolution, any input
source and any screen refresh rate.
∙Anti Motion Blur will be disabled if
Adaptive-Sync is enabled.
ON
Professional
1st Level Menu 2nd Level Menu Description
Pro Mode User ∙Default mode is User.
∙All items can be adjusted by users.
∙Use Up or Down Button to select and
preview mode effects.
∙Press the OK Button to confirm and apply
your mode type.
Reader
Cinema
Designer
Eye Saver OFF ∙Eye Saver protects your eyes against blue
light. When enabled, Eye Saver adjusts the
screen color temperature to a more yellow
glow.
∙Users can adjust Eye Saver in any mode.
∙When Pro Mode is set to Reader, it is
mandatory to enable Eye Saver.
ON
HDCR OFF ∙Users can adjust HDCR in any mode.
∙HDCR enhances image quality by
increasing the contrast of images.
∙When HDCR is set to ON, Brightness will be
grayed out.
∙HDCR and Anti Motion Blur cannot be
enabled simultaneously.
ON
Anti Motion
Blur
OFF ∙When Anti Motion Blur is enabled, HDCR
and Brightness cannot be enabled and will
be grayed out.
∙Response time will be grayed out while Anti
Motion Blur is enabled.
∙Anti Motion Blur has to be disabled while
Adaptive-Sync is set to ON.
ON
18 OSD Menus
1st Level Menu 2nd Level Menu Description
Image
Enhancement
OFF ∙Image Enhancement enhances image
edges to improve their acutance.
∙Users can adjust Image Enhancement in
any mode.
Weak
Medium
Strong
Strongest
Image
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ∙Users can adjust Brightness
in User, RTS, RPG and Reader
mode.
∙Brightness will be grayed out
when Anti Motion Blur or HDCR
are enabled.
Contrast 0-100 ∙Users can adjust Contrast in any
mode.
Sharpness 0-5 ∙Users can adjust Sharpness in
any mode.
∙Sharpness improves clarity and
details of images.
Color
Temperature
Cool ∙Color Temperature default is
Normal.
∙Use Up or Down Button to select
and preview mode effects.
∙Press the OK Button to confirm
and apply your mode type.
∙Users can adjust Color
Temperature in Customization
mode.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Screen Size Auto ∙Users can adjust Screen Size in
any mode, any resolution and any
screen refresh rate.
∙Default is Auto.
4:3
16:9
19
OSD Menus
Input Source
1st Level Menu 2nd Level Menu Description
HDMI1 ∙Users can adjust Input Source in any mode.
HDMI2
DP
Auto Scan OFF ∙Users can use the Navi Key to select Input
Source at below status:
•While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
•While “No Signal” message box is shown
on the monitor.
ON
Navi Key
1st Level Menu 2nd Level Menu Description
Up / Down / Left
/ Right
OFF ∙Up Button default is Game Mode.
∙Down Button default is Screen Assistance.
∙Left Button default is Alarm Clock.
∙Right Button default is Input Source.
∙All Navi Key items can be adjusted via
OSD Menus.
Brightness
Game Mode
Screen
Assistance
Alarm Clock
Input Source
Refresh Rate
Information on
Screen
20 OSD Menus
Setting
1st Level Menu 2nd Level Menu Description
Language 繁體中文 ∙Language factory default is English.
∙Users have to press the OK Button to
confirm and apply the Language setting.
∙Language is an independent setting.
Users’ own language setting will override
the factory default. When users set Reset
to Yes, Language will not be changed.
English
Français
Deutsch
Italiano
Español
한국어
日本語
Русский
Português
简体中文
Bahasa Indonesia
Türkçe
(More languages
coming soon)
Transparency 0~5 ∙Users can adjust Transparency in any
mode.
OSD Time Out 5~30s ∙Users can adjust OSD Time Out in any
mode.
Power Button OFF ∙When set to OFF, users can press the
power button to turn off the monitor.
Standby ∙When set to Standby, users can press the
power button to turn off the panel and
backlight.
Information on
Screen
OFF ∙The information of the monitor status will
be shown on the right side of the screen.
∙Users can enable or disable the
Information on Screen. Default is OFF.
ON
Reset YES ∙Users can Reset and restore settings to
original OSD Default in any mode.
NO
21
Specifications
Specifications
Model Optix G242/ Optix G242P/ Optix G272
Size 23.8 inch (Optix G242/ Optix G242P)
27 inch (Optix G272)
Curvature N/A
Panel Type IPS
Resolution 1920 x 1080 @144Hz
Aspect Ratio 16:9
Brightness (nits) 250 (typ.)
Contrast Ratio 1000:1
Refresh Rate 144Hz
Response Time 1ms (MPRT)
Input Interface ∙HDMI 1.4 Port x2
∙DisplayPort x1
I/O
∙HDMI 1.4 Port x2
∙DisplayPort x1
∙Headphone Jack x1
View Angles 178°(H) , 178°(V)
DCI-P3*/ sRGB 95%/ 128% (Optix G242/ Optix G242P)
92%/ 120% (Optix G272)
Surface Treatment Anti-glare
Display Colors 16.7M
Power Adapter Specs Model: ADPC2045
Power Input 100~240Vac, 50~60Hz, 1.5A
Power Output 20V 2.25A
Adjustment (Tilt) -5° ~ 20°
Adjustment (Height) 0 ~ 130mm (Optix G242P)
Adjustment (Swivel) -45° ~ 45° (Optix G242P)
Adjustment (Pivot) -90° ~ 90° (Optix G242P)
Kensington Lock Yes
22 Specifications
* Based on CIE1976 test standards.
Model Optix G242/ Optix G242P/ Optix G272
VESA Mounting
∙Plate Type: 100 x 100 mm
∙Screw Type: M4 x 10 mm
•Thread Diameter: 4 mm
•Thread Pitch: 0.7 mm
•Thread Length: 10 mm
Dimension (W x H x D)
540.3 x 411.6 x 228.2 mm (Optix G242)
540.3 x 514.3 x 233.7 mm (Optix G242P)
612.5 x 444.3 x 228.2 mm (Optix G272)
Weight
3.33 Kg (net)/ 5.0 Kg (gross) (Optix G242)
5.36 Kg (net)/ 7.66 Kg (gross) (Optix G242P)
4.33 Kg (net)/ 6.63 Kg (gross) (Optix G272)
Environment
Operating
∙Temperature:0℃to40℃
∙Humidity: 20% to 90%, non-condensing
∙Altitude: 0 ~ 5000m
Storage ∙Temperature:-20℃to60℃
∙Humidity: 10% to 90%, non-condensing
23
Preset Display Modes
Preset Display Modes
Standard Resolution Optix G242/ Optix G242P
HDMI DP
VGA 640x480 @60Hz V V
@67Hz V V
@72Hz V V
@75Hz V V
720x400 @70Hz V V
SVGA 800x600 @56Hz V V
@60Hz V V
@72Hz V V
@75Hz V V
XGA 1024x768 @60Hz V V
@70Hz V V
@75Hz V V
SXGA 1152x864 @75Hz V V
1280x720 @60Hz V V
1280x960 @60Hz V V
1280x1024 @60Hz V V
@75Hz V V
WXGA+ 1440x900 @60Hz V V
WSXGA+ 1680x1050 @60Hz V V
DOS 640x350 @70Hz V V
720x400 @70Hz V V
Full HD 1920x1080 @60Hz V V
@144Hz V V
Mode Video Timing
Resolution
Optix G242/ Optix G242P
HDMI DP
480P 640x480P @60Hz V V
720x480P V V
1440x480P V V
576P 720x576P @50Hz V V
1440x576P V V
720P 1280x720P @50Hz V V
24 Preset Display Modes
Mode Video Timing
Resolution
Optix G242/ Optix G242P
HDMI DP
1080P 1920x1080P @50Hz V V
@60Hz V V
@120Hz V V
Standard Resolution Optix G272
HDMI DP
VGA 640x480 @60Hz V V
@67Hz V V
@72Hz V V
@75Hz V V
720x400 @70Hz V V
SVGA 800x600 @56Hz V V
@60Hz V V
@72Hz V V
@75Hz V V
XGA 1024x768 @60Hz V V
@70Hz V V
@75Hz V V
SXGA 1152x864 @75Hz V V
1280x720 @60Hz V V
1280x960 @60Hz V V
1280x1024 @60Hz V V
@75Hz V V
WXGA+ 1440x900 @60Hz V V
WSXGA+ 1680x1050 @60Hz V V
DOS 640x350 @70Hz V V
720x400 @70Hz V V
Full HD 1920x1080 @60Hz V V
@144Hz V V
25
Preset Display Modes
Mode Video Timing
Resolution
Optix G272
HDMI DP
480P 640x480P @60Hz V V
720x480P V V
1440x480P V V
576P 1440x576P @50Hz V V
1080P 1920x1080P @60Hz V V
@120Hz V V
26 Troubleshooting
Troubleshooting
The power LED is off.
•Press the monitor power button again.
•Check if the monitor power cable is properly connected.
No image.
•Check if the computer graphics card is properly installed.
•Check if the computer and monitor are connected to electrical outlets and are
turned on.
•Check if the monitor signal cable is properly connected.
•The computer may be in Standby mode. Press any key to activate the monitor.
The screen image is not properly sized or centered.
•Refer to Preset Display Modes to set the computer to a setting suitable for the
monitor to display.
No Plug & Play.
•Check if the monitor power cable is properly connected.
•Check if the monitor signal cable is properly connected.
•Check if the computer and graphics card are Plug & Play compatible.
The icons, font or screen are fuzzy, blurry or have color problems.
•Avoid using any video extension cables.
•Adjust brightness and contrast.
•Adjust RGB color or tune color temperature.
•Check if the monitor signal cable is properly connected.
•Check for bent pins on the signal cable connector.
The monitor starts flickering or shows waves.
•Change the refresh rate to match the capabilities of your monitor.
•Update your graphics card drivers.
•Keep the monitor away from electrical devices that may cause electromagnetic
interference (EMI).
27
Safety Instructions
Safety Instructions
∙Read the safety instructions carefully and thoroughly.
∙All cautions and warnings on the device or user’s manual should be noted.
∙Refer servicing to qualified personnel only.
∙Keep the User’s Guide that comes with the package for future reference.
∙To prevent fire or shock hazard, keep this device away from humidity and high
temperature.
∙Lay this device on a reliable flat surface before setting it up.
∙Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
Do not disable the protective earth pin from the plug. The device must be connected
to an earthed mains socket-outlet.
∙Always disconnect the power cord or switch the wall socket off if the device would be
left unused for a certain time to achieve zero energy consumption.
∙The ventilator on the device is used for air convection and to prevent the device from
overheating. Do not cover the ventilator.
∙Do not leave the device in an unconditioned environment with a storage temperature
above60℃orbelow-20℃,whichmaydamagethedevice.
∙NOTE:Themaximumoperatingtemperatureisaround40℃.
∙When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid into
the opening; that could damage the device or cause electric shock.
∙Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
∙Always keep strong magnetic or electrical objects away from the device.
∙If any of the following situations arises, get the device checked by service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the device.
•The device has been exposed to moisture.
•The device does not work well or you can not get it work according to user’s
manual.
•The device has dropped and damaged.
•The device has obvious sign of breakage.
∙To prevent the monitor from tipping over, secure the monitor to a desk, wall or fixed
object with a anti-tip fastener that helps to properly support the monitor and keep it
safe in place.
⚠
Important
Please confirm the power distribution system in the installation site shall provide the
circuit breaker rated 120/240V, 20A (maximum).
28 Regulatory Notices
Regulatory Notices
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage
Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive
(2011/65/EU). This product has been tested and found to comply with the harmonized
standards for Information Technology Equipment published under Directives of Official
Journal of the European Union.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below:
∙Reorient or relocate the receiving antenna.
∙Increase the separation between the equipment and receiver.
∙Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
∙Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA
(626) 913-0828
www.msi.com
29
Regulatory Notices
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2012/19/EU, products of “electrical and
electronic equipment” cannot be discarded as municipal waste anymore
and manufacturers of covered electronic equipment will be obligated to
take back such products at the end of their useful life.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
https://storage-asset.msi.com/html/popup/csr/evmtprtt_pcm.html
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates
that manufacturers provide material declarations for certain categories of electronic
products offered for sale after July 1, 2006.
https://storage-asset.msi.com/html/popup/csr/cemm_jp.html
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011”
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey.
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved
bytheResolutionofCabinetofMinistryofUkraineasofDecember3,2008№1057,
in terms of restrictions for the use of certain dangerous substances in electrical and
electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of
hazardous substances in electronic and electric products.
30 Regulatory Notices
Green Product Features
∙Reduced energy consumption during use and stand-by
∙Limited use of substances harmful to the environment and health
∙Easily dismantled and recycled
∙Reduced use of natural resources by encouraging recycling
∙Extended product lifetime through easy upgrades
∙Reduced solid waste production through take-back policy
Environmental Policy
∙The product has been designed to enable proper reuse of parts and
recycling and should not be thrown away at its end of life.
∙Users should contact the local authorized point of collection for
recycling and disposing of their end-of-life products.
∙Visit the MSI website and locate a nearby distributor for further
recycling information.
∙Users may also reach us at gpcontdev@msi.com for information regarding proper
disposal, take-back, recycling, and disassembly of MSI products.
Warning!
Overuse of screens is likely to affect eyesight.
Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged 2
years and over, screen time should be limited to less than one hour per day.
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is
a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names
mentioned may be trademarks of their respective owners. No warranty as to accuracy
or completeness is expressed or implied. MSI reserves the right to make changes to
this document without prior notice.
Technical Support
If a problem arises with your product and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor. Alternatively,
please visit https://www.msi.com/support/ for further guidance.