Table of Contents
MSI MAG271R User Manual
Displayed below is the user manual for MAG271R by MSI which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Optix Series
LCD Monitor
Optix MAG271R (3CA1)
Optix MAG271V (3CA1)
Preface
iiiii
Contents
Copyright and Trademarks Notice ��������������������������������������������������������������������������iii
Revision ������������������������������������������������������������������������������������������������������������������iii
Technical Support ���������������������������������������������������������������������������������������������������iii
Safety Instructions ���������������������������������������������������������������������������������������������������iv
CE Conformity ���������������������������������������������������������������������������������������������������������vi
FCC-B Radio Frequency Interference Statement ���������������������������������������������������vi
WEEE Statement ���������������������������������������������������������������������������������������������������vii
Chemical Substances Information �������������������������������������������������������������������������vii
RoHS Statement ����������������������������������������������������������������������������������������������������vii
1. Getting Started ................................................... 1-1
Package Contents ������������������������������������������������������������������������������������������������ 1-2
Installing the Monitor Stand ���������������������������������������������������������������������������������� 1-3
Adjusting the Monitor ������������������������������������������������������������������������������������������� 1-6
Monitor Overview ������������������������������������������������������������������������������������������������� 1-8
Connecting the Monitor to PC ���������������������������������������������������������������������������� 1-10
2. OSD Setup .......................................................... 2-1
Navi Key ��������������������������������������������������������������������������������������������������������������� 2-2
OSD Setup via Navi Key �������������������������������������������������������������������������������������� 2-5
Appendix ................................................................ A-1
Specications �������������������������������������������������������������������������������������������������������A-2
Preset Display Modes ������������������������������������������������������������������������������������������A-4
Troubleshooting ���������������������������������������������������������������������������������������������������A-5
Preface
iiiii
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co�, Ltd� All rights reserved� The MSI logo used is a registered
trademark of Micro-Star Int’l Co�, Ltd� All other marks and names mentioned may be
trademarks of their respective owners� No warranty as to accuracy or completeness is
expressed or implied� MSI reserves the right to make changes to this document without
prior notice�
Revision
Revision Date
V1�0 2019/03
Technical Support
If a problem arises with your product and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor� Alternatively, please
visit https://www�msi�com/support/ for further guidance�
Preface
viv
Safety Instructions
◙Read the safety instructions carefully and thoroughly�
◙All cautions and warnings on the device or user’s manual should be noted�
◙Refer servicing to qualied personnel only.
Keep the User’s Guide that comes with the package for future reference�
To prevent re or shock hazard, keep this device away from humidity and high
temperature�
Lay this device on a reliable at surface before setting it up.
◙Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 100~240V before connecting the device to
the power outlet� Do not disable the protective earth pin from the plug� The
device must be connected to an earthed mains socket-outlet�
◙Always disconnect the power cord or switch the wall socket o if the device
would be left unused for a certain time to achieve zero energy consumption.
The ventilator on the device is used for air convection and to prevent the device
from overheating� Do not cover the ventilator�
Do not leave the device in an unconditioned environment with a storage
temperature above 60OC or below -20OC, which may damage the device�
NOTE: The maximum operating temperature is around 40OC�
When cleaning the device, be sure to remove the power plug� Use a piece of soft
cloth rather than industrial chemical to clean the device� Never pour any liquid
into the opening; that could damage the device or cause electric shock�
Preface
viv
Place the power cord in a way that people are unlikely to step on it� Do not place
anything on the power cord�
Always keep strong magnetic or electrical objects away from the device�
If any of the following situations arises, get the device checked by service
personnel:
◙The power cord or plug is damaged�
◙Liquid has penetrated into the device�
◙The device has been exposed to moisture�
◙The device does not work well or you can not get it work according to user’s
manual�
◙The device has dropped and damaged�
◙The device has obvious sign of breakage�
Green Product Features
◙Reduced energy consumption during use and stand-by
◙Limited use of substances harmful to the environment and health
◙Easily dismantled and recycled
◙Reduced use of natural resources by encouraging recycling
◙Extended product lifetime through easy upgrades
◙Reduced solid waste production through take-back policy
Environmental Policy
◙The product has been designed to enable proper reuse of parts and
recycling and should not be thrown away at its end of life�
◙Users should contact the local authorized point of collection for recycling
and disposing of their end-of-life products�
◙Visit the MSI website and locate a nearby distributor for further recycling
information�
◙Users may also reach us at gpcontdev@msi�com for information regarding
proper disposal, take-back, recycling, and disassembly of MSI products�
★ Warning! Overuse of screens is likely to aect eyesight.
★ Recommendations:
1� Take a 10-minute break for every 30 minutes of screen time�
2� Children under 2 years of age should have no screen time� For children aged
2 years and over, screen time should be limited to less than one hour per day�
Preface
viivi
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating
to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive
(2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/
EU)�
This product has been tested and found to comply with the harmonized standards for
Information Technology Equipment published under Directives of Ocial Journal of the
European Union�
FCC-B Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules� These limits are designed to provide
reasonable protection against harmful interference in a residential installation� This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications� However, there is no guarantee that interference will not occur
in a particular installation� If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the measures
listed below:
￭Reorient or relocate the receiving antenna�
￭Increase the separation between the equipment and receiver�
￭Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected�
￭Consult the dealer or an experienced radio/television technician for help�
Notice 1
The changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment�
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits�
This device complies with Part 15 of the FCC Rules� Operation is subject to the following
two conditions:
1� this device may not cause harmful interference, and
2� this device must accept any interference received, including interference that may
cause undesired operation�
MSI Computer Corp�
901 Canada Court, City of Industry, CA 91748, USA
(626)913-0828
www�msi�com
Preface
viivi
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes eect on August
13, 2005, products of “electrical and electronic equipment” cannot be
discarded as municipal waste anymore and manufacturers of covered
electronic equipment will be obligated to take back such products at the end
of their useful life�
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation
(Regulation EC No� 1907/2006 of the European Parliament and the Council), MSI
provides the information of chemical substances in products at:
https://www�msi�com/html/popup/csr/evmtprtt_pcm�html
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, dened by specication JIS C 0950, mandates
that manufacturers provide material declarations for certain categories of electronic
products oered for sale after July 1, 2006.
https://www�msi�com/html/popup/csr/cemm_jp�html
https://tw�msi�com/html/popup/csr_tw/cemm_jp�html
India RoHS
This product complies with the "India E-waste (Management and Handling) Rule 2011"
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0�1 weight % and 0�01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule�
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved by
the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057,
in terms of restrictions for the use of certain dangerous substances in electrical and
electronic equipment�
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous
substances in electronic and electric products�
1
Getting Started
This chapter provides you with the information on hardware setup procedures�
While connecting devices, be careful in holding the devices and use a
grounded wrist strap to avoid static electricity�
IMPORTANT
•
The illustrations are for reference only� Your monitor may vary in appearance�
•
Do not use any sharp objects on the monitor�
Getting Started
1-31-2
Package Contents
1� Monitor
2� Stand
3� Stand Base with Screw
4� Power Adapter & Power Cord
5� HDMI Cable
6� DisplayPort Cable
7� USB Upstream Cable (to enable the USB ports on the monitor)
8� Quick Start Guide
9� Warranty Card
* Contact your place of purchase or local distributor if any of the items is damaged or
missing�
* Package contents may vary by country�
Getting Started
1-31-2
Installing the Monitor Stand
Optix MAG271R (3CA1) Option 1
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel�
The holes for installing the stand can be also used for wall mount� Please contact your
dealer for proper wall mount kit�
1� Connect the base to the stand and tighten the base screw to secure the base�
2� Fit the stand to the monitor�
3� Push down the latch to lock the stand in place�
3
2
1
Getting Started
1-51-4
Optix MAG271R (3CA1) Option 2
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel�
The holes for installing the stand can be also used for wall mount� Please contact your
dealer for proper wall mount kit�
1� Fit the stand to the monitor�
2� Push down the latch to lock the stand in place�
3� Connect the base to the stand and tighten the base screw to secure the base�
3
2
1
Getting Started
1-51-4
Optix MAG271V (3CA1)
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel�
The holes for installing the stand can be also used for wall mount� Please contact your
dealer for proper wall mount kit�
1� Fit the stand to the monitor�
2� Push down the latch to lock the stand in place�
3� Connect the base to the stand and tighten the base screw to secure the base�
3
2
1
Getting Started
1-71-6
Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment
capabilities such as tilt, lift and swivel�
IMPORTANT
Avoid touching the display panel when adjusting the monitor�
Optix MAG271R (3CA1) Option 1
130mm
-5
O
20
O
Optix MAG271R (3CA1) Option 2
130mm
-5
O
20
O
Getting Started
1-71-6
Optix MAG271V (3CA1)
-5
O
20
O
Getting Started
1-91-8
Monitor Overview
10
973 54 8
2
1
6
1Power Button
2Navi Key
3Kensington Lock
4Power Jack
Getting Started
1-91-8
5USB Type B Upstream Port
For USB Upstream Cable�
IMPORTANT
Check the package for USB
Upstream Cable and connect
it to the PC and monitor� Once
this cable is connected, the
USB Type A Downstream
Ports on the monitor will be
ready for use�
To Monitor
To PC
6USB Type A Downstream Port
7DisplayPort
8HDMI Port
9Headphone Jack
10 MSI Function Key
Getting Started
PB1-10
Connecting the Monitor to PC
1� Turn o your computer.
2� Connect the HDMI/DisplayPort cable from the monitor to your computer�
3� Assemble the monitor power adapter & power cord� (Figure A)
4� Connect the power adapter to the monitor power jack� (Figure B)
5� Plug the power cord into the electrical outlet� (Figure C)
6� Turn on the monitor� (Figure D)
7� Select your Input Source at OSD menu and power on the computer�
A
B
C
D
2
OSD Setup
This chapter provides you with essential information on OSD Setup�
IMPORTANT
All information is subject to change without prior notice�
2-3
OSD Setup
2-2
Navi Key
The monitor comes with a Navi Key, a multi-directional control that helps navigate the
On-Screen Display (OSD) menu�
Navi Key
2-3
OSD Setup
2-2
The Navi Key default settings are as follows�
Navi Key Hot Key
(When OSD menu is OFF)
Basic Operations
(When OSD menu is ON)
Middle Button OSD Main Menu ■Entering submenus
■ Conrming a selection or
setting
Up Game Mode ■Press Middle
Button to conrm
selection and exit�
■Press Up and
Down Buttons to
adjust�
■Press Left Button
to cancel preview
and exit without
applying mode
eect.
■Selecting function menus
and items
■Allowing upward adjustment
in function values
Down Screen Assistance ■Press Middle
Button to conrm
selection and exit�
■Press Up and
Down Buttons to
adjust�
■Press Left Button
to cancel preview
and exit�
■Selecting function menus
and items
■Allowing downward
adjustment in function values
Left Alarm Clock ■Press Middle
Button to conrm
selection and exit�
■Press Up and
Down Buttons to
select�
■Press Left Button
to cancel preview
and exit�
■Selecting function menus
and items
■Exiting the current menu
Right Input Source ■Press Middle
Button to conrm
selection and exit�
■Press Up and
Down Buttons to
select�
■Press Left Button
to exit�
■Selecting function menus
and items
■Entering submenus
2-5
OSD Setup
2-4
Users may enter the OSD Menu to customize their own Navi Key Hot Keys.
More Hot Key options are as below�
Navi Key Hot Key Options Operations
Brightness ■Press Middle Button to save value and exit�
■Press Up and Down Buttons to adjust�
■Press Left Button to cancel preview and exit�
Refresh Rate ■ Press Middle Button to conrm selection and
exit�
■Press Right Button to turn on and Left Button to
turn o the Refresh Rate.
2-5
OSD Setup
2-4
OSD Setup via Navi Key
Press the Middle button of Navi Key to launch the On-Screen Display (OSD) main
menu� Use the Up, Down, Left, Right buttons to tune the desired function menus to
suit your personal preferences�
hGAMING
1st Level Menu 2nd/3rd Level Menu Description
Game Mode User All items can be adjusted by users�
FPS All items can be adjusted by users�
Racing All items can be adjusted by users�
RTS All items can be adjusted by users�
RPG All items can be adjusted by users�
■ Use Up or Down Button to select and preview mode eects.
■ Press the Middle Button to conrm and apply your mode type.
Night Vision OFF ■ This function optimizes background
brightness and is recommended for FPS
games�
Normal
Strong
Strongest
A�I�
Response Time Normal ■Users can adjust Response Time in any
Mode�
■When Response Time is set to Fastest with
at least 75Hz Screen Refresh Rate, Anti
Motion Blur will be automatically enabled�
■When Screen Refresh Rate is lower than
75HZ, “Fastest” will be grayed out�
■This function is recommended for FPS and
Racing games�
Fast
Fastest
2-7
OSD Setup
2-6
1st Level Menu 2nd/3rd Level Menu Description
Anti Motion Blur (OFF) ■Brightness cannot be adjusted when Anti
Motion Blur is set to ON�
■When Response Time is set to Fastest with
at least 75Hz Screen Refresh Rate, Anti
Motion Blur will be automatically enabled�
■When Screen Refresh Rate is lower than
75HZ, Anti Motion Blur cannot be enabled
and Response Time cannot be set to Fastest�
■When Anti Motion Blur is enabled, HDCR
cannot be enabled and will be grayed out�
■This function is recommended for cinema,
FPS and Racing games�
■When FreeSync is enabled, Anti Motion Blur
will be grayed out�
(ON)
Refresh Rate Location Left Top ■Users can adjust Refresh Rate in any Mode�
■Default Refresh Rate Location is Left Top�
Location is adjustable in OSD Menu� Press
the Middle Button to conrm and apply your
Refresh Rate Location�
■This monitor follows and works at the
Operating System’s preset Screen Refresh
Rate�
Right Top
Left Bottom
Right Bottom
OFF
ON
Alarm Clock Location Left Top ■Users can adjust Alarm Clock in any Mode�
■After setting the time, press the Middle Button
to activate the timer�
■Default Alarm Clock Location is Left Top�
Users can select their own location�
Right Top
Left Bottom
Right Bottom
OFF
15:00 00:01~99:59
30:00
45:00
60:00
Screen
Assistance
None ■Users can adjust Screen Assistance in any
Mode�
■Screen Assistance default is None�
FreeSync (OFF) ■FreeSync prevents screen tearing�
■HDMI default is ON but grayed out (cannot
be changed)�
■DisplayPort default is ON and can be
adjusted ON/OFF in any mode, any
resolution, any input source and any screen
refresh rate�
■When FreeSync is enabled, Anti Motion Blur
will be grayed out�
(ON)
2-7
OSD Setup
2-6
hProfessional
1st Level Menu 2nd Level Menu Description
Pro Mode User Default mode� All items can be adjusted by users�
Reader All items can be adjusted by users�
Cinema All items can be adjusted by users�
Designer All items can be adjusted by users�
■ Use Up or Down Button to select and preview mode eects.
■ Press the Middle Button to conrm and apply your mode type.
Eye Saver (OFF) ■Eye Saver protects your eyes against blue light�
When enabled, Eye Saver adjusts the screen color
temperature to a more yellow glow�
■Users can adjust Eye Saver in any Mode�
■When Pro Mode is set to Reader, it is mandatory to
enable Eye Saver�
(ON)
HDCR (OFF) ■Users can adjust HDCR in any Mode�
■HDCR enhances image quality by increasing the
contrast of images�
■When HDCR is set to ON, Brightness will be
grayed out�
■HDCR and Anti Motion Blur cannot be enabled
simultaneously�
■When HDCR is enabled, Anti Motion Blur cannot
be enabled and Response Time cannot be set to
Fastest�
(ON)
Anti Motion Blur (OFF) ■Brightness cannot be adjusted when Anti Motion
Blur is set to ON�
■When Response Time is set to Fastest with at least
75Hz Screen Refresh Rate, Anti Motion Blur will be
automatically enabled�
■When Screen Refresh Rate is lower than 75HZ,
Anti Motion Blur cannot be enabled and Response
Time cannot be set to Fastest�
■When Anti Motion Blur is enabled, HDCR cannot
be enabled and will be grayed out�
■This function is recommended for cinema, FPS and
Racing games�
■When FreeSync is enabled, Anti Motion Blur will be
grayed out�
(ON)
Image
Enhancement
OFF ■Image Enhancement enhances image edges to
improve their acutance�
■Users can adjust Image Enhancement in any
Mode�
Weak
Medium
Strong
Strongest
2-9
OSD Setup
2-8
hImage
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ■Users can adjust Brightness in User, RTS, RPG
and Reader mode�
■Brightness will be grayed out when Anti Motion Blur
and HDCR are enabled�
Contrast 0-100 ■Users can adjust Contrast in any Mode�
Sharpness 0-5 ■Users can adjust Sharpness in any Mode�
■Sharpness improves clarity and details of images�
Color
Temperature
Cool ■Color Temperature default is Normal�
■Use Up or Down Button to select and preview mode
eects.
■ Press the Middle Button to conrm and apply your
mode type�
■Users can adjust Color Temperature in
Customization mode.
Normal
Warm
Customization R (0-
100)
G (0-
100)
B (0-
100)
Screen Size 4:3 ■ Users can adjust Screen Size in any mode, any
resolution and any screen refresh rate�
16:9
hInput Source
1st Level Menu Description
HDMI1 Users can adjust Input Source in any Mode�
HDMI2
DP
2-9
OSD Setup
2-8
hNavi Key
1st Level Menu 2nd Level Menu Description
Up OFF ■Up Button default is Game Mode�
■Down Button default is Screen Assistance�
■Left Button default is Alarm Clock�
■Right Button default is Input Source�
■All Navi Key items can be adjusted via OSD Menu�
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
Refresh Rate
Down OFF
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
Refresh Rate
Left OFF
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
Refresh Rate
Right OFF
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
Refresh Rate
PB
OSD Setup
2-10
hSetting
1st Level Menu 2nd Level Menu Description
Language 繁體中文 ■Language factory default is English�
■ Users have to press the Middle Button to conrm
and apply the Language setting�
■Language is an independent setting� Users’ own
language setting will override the factory default�
When users set Reset to Yes, Language will not
be changed�
English
Français
Deutsch
Italiano
Español
한국어
日本語
Русский
Português
简体中文
ไทย
Bahasa Indonesia
Türkçe
(More languages
coming soon)
Transparency 0~5 Users can adjust Transparency in any Mode�
OSD Time Out 5-30s Users can adjust OSD Time Out in any Mode�
RGB LED OFF Users can adjust RGB LED to On or O.
ON
Reset YES Users can Reset and restore settings to original OSD
Default in any Mode�
NO
A
Appendix
IMPORTANT
All information is subject to change without prior notice�
Appendix
A-3A-2
Specications
Model Optix MAG271R
(3CA1) Option 1
Optix MAG271R
(3CA1) Option 2
Optix MAG271V
(3CA1)
Size 27 inch
Curvature No
Panel Type VA
Resolution 1920 x 1080 @165Hz
Aspect Ratio 16:9
Brightness (nits) 300
Contrast Ratio 3000:1
Refresh Rate 48~165Hz
Response Time 1ms (MPRT)
Input Interface HDMI x2, DP x1
I/O ■USB 2�0 Type A x 2
■USB 2�0 Type B x 1 (for PC to Monitor)
■ Headphone Jack x 1
View Angles 178°(H) , 178°(V)
sRGB / DCI-P3* 118% / 92%
Surface Treatment Anti-glare
Display Colors 16�7M
Power Type External Adapter
Power Consumption
(Typical)
35W
Power Input AC 100~240, 50~60Hz
Power Output 12V 5A
Adjustment (Tilt) -5° ~ 20° -5° ~ 20° -5° ~ 20°
Adjustment (Swivel) No No No
Adjustment (Height) 0 ~ 130mm 0 ~ 130mm No
Kensington Lock Yes
VESA Mounting ■Plate Type: 100 x 100mm
■Screw Type: M4 x 10mm
▶Thread Diameter: 4mm
▶Thread Pitch: 0�7mm
▶Thread Length: 10mm
Dimension (W x D x H) 617 x 182�4 x
535�3 mm
617 x 266�5 x
551�4 mm
617 x 225�2 x
448�7 mm
Net Weight 6�68 kg (14�73 lb) 6�08 kg (13�4 lb) 5�03 kg (10�09 lb)
Appendix
A-3A-2
Model Optix MAG271R
(3CA1) Option 1
Optix MAG271R
(3CA1) Option 2
Optix MAG271V
(3CA1)
Environment Operating Temperature: 0°C to 40°C
Humidity: 20% to 90%, non-condensing
Altitude: 0 ~ 5000m
Storage Temperature: -20°C to 60°C
Humidity: 10% to 90%, non-condensing
* Based on CIE1976 test standards�
Appendix
A-5A-4
Preset Display Modes
Resolution Optix MAG271R / Optix MAG271V
HDMI DP
640x480 @60Hz V V
640x480 @72Hz V V
640x480 @75Hz V V
800x600 @56Hz V V
800x600 @60Hz V V
800x600 @72Hz V V
800x600 @75Hz V V
1024x768 @60Hz V V
1024x768 @70Hz V V
1024x768 @75Hz V V
1280x1024 @60Hz V V
1280x1024 @75Hz V V
1440x900 @60Hz V V
1680x1050 @60Hz V V
1920x1080 @60Hz V V
1920x1080 @120Hz V V
1920x1080 @144Hz V V
1920x1080 @165Hz V V
Appendix
A-5A-4
Troubleshooting
The power LED is o.
■Press the monitor power button again�
■Check if the monitor power cable is properly connected�
No image.
■Check if the computer graphics card is properly installed�
■Check if the computer and monitor are connected to electrical outlets and
are turned on�
■Check if the monitor signal cable is properly connected�
■The computer may be in Standby mode� Press any key to activate the
monitor�
The screen image is not properly sized or centered.
Refer to Preset Display Modes to set the computer to a setting suitable for the
monitor to display�
No Plug & Play.
■Check if the monitor power cable is properly connected�
■Check if the monitor signal cable is properly connected�
■Check if the computer and graphics card are Plug & Play compatible�
The icons, font or screen are fuzzy, blurry or have color problems.
■Avoid using any video extension cables�
■Adjust brightness and contrast�
■Adjust RGB color or tune color temperature�
■Check if the monitor signal cable is properly connected�
■Check for bent pins on the signal cable connector�
The monitor starts ickering or shows waves.
■Change the refresh rate to match the capabilities of your monitor�
■Update your graphics card drivers�
■Keep the monitor away from electrical devices that may cause
electromagnetic interference (EMI)�