Table of Contents
MSI MAG273R User Manual
Displayed below is the user manual for MAG273R by MSI which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Optix Series
LCD Monitor
Optix MAG273 (3CB6)
Optix MAG273R (3CB6)
Preface
iiiii
Contents
Copyright and Trademarks Notice ��������������������������������������������������������������������������iii
Revision ������������������������������������������������������������������������������������������������������������������iii
Technical Support ���������������������������������������������������������������������������������������������������iii
Safety Instructions ���������������������������������������������������������������������������������������������������iv
CE Conformity ���������������������������������������������������������������������������������������������������������vi
FCC-B Radio Frequency Interference Statement ���������������������������������������������������vi
WEEE Statement ���������������������������������������������������������������������������������������������������vii
Chemical Substances Information �������������������������������������������������������������������������vii
RoHS Statement ����������������������������������������������������������������������������������������������������vii
Getting Started �������������������������������������������������������������������������������1-1
Package Contents ������������������������������������������������������������������������������������������������ 1-2
Installing the Monitor Stand ���������������������������������������������������������������������������������� 1-3
Adjusting the Monitor ������������������������������������������������������������������������������������������� 1-5
Monitor Overview ������������������������������������������������������������������������������������������������� 1-6
Connecting the Monitor to PC ������������������������������������������������������������������������������ 1-8
OSD Setup ��������������������������������������������������������������������������������������2-1
Navi Key ��������������������������������������������������������������������������������������������������������������� 2-2
OSD Setup via Navi Key �������������������������������������������������������������������������������������� 2-5
Appendix ���������������������������������������������������������������������������������������A-1
Specications �������������������������������������������������������������������������������������������������������A-2
Preset Display Modes ������������������������������������������������������������������������������������������A-4
Troubleshooting ���������������������������������������������������������������������������������������������������A-5
Preface
iiiii
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co�, Ltd� All rights reserved� The MSI logo used is a registered
trademark of Micro-Star Int’l Co�, Ltd� All other marks and names mentioned may be
trademarks of their respective owners� No warranty as to accuracy or completeness is
expressed or implied� MSI reserves the right to make changes to this document without
prior notice�
Revision
Revision Date
V1�0 2020/02
Technical Support
If a problem arises with your product and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor� Alternatively, please
visit https://www�msi�com/support/ for further guidance�
Preface
viv
Safety Instructions
◙Read the safety instructions carefully and thoroughly�
◙All cautions and warnings on the device or user’s manual should be noted�
◙Refer servicing to qualied personnel only.
Keep the User’s Guide that comes with the package for future reference�
To prevent re or shock hazard, keep this device away from humidity and high
temperature�
Lay this device on a reliable at surface before setting it up.
◙Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 100~240V before connecting the device to
the power outlet� Do not disable the protective earth pin from the plug� The
device must be connected to an earthed mains socket-outlet�
◙Always disconnect the power cord or switch the wall socket o if the device
would be left unused for a certain time to achieve zero energy consumption.
The ventilator on the device is used for air convection and to prevent the device
from overheating� Do not cover the ventilator�
Do not leave the device in an unconditioned environment with a storage
temperature above 60OC or below -20OC, which may damage the device�
NOTE: The maximum operating temperature is around 40OC�
When cleaning the device, be sure to remove the power plug� Use a piece of soft
cloth rather than industrial chemical to clean the device� Never pour any liquid
into the opening; that could damage the device or cause electric shock�
Place the power cord in a way that people are unlikely to step on it� Do not place
anything on the power cord�
Preface
viv
Always keep strong magnetic or electrical objects away from the device�
If any of the following situations arises, get the device checked by service
personnel:
◙The power cord or plug is damaged�
◙Liquid has penetrated into the device�
◙The device has been exposed to moisture�
◙The device does not work well or you can not get it work according to user’s
manual�
◙The device has dropped and damaged�
◙The device has obvious sign of breakage�
Green Product Features
◙Reduced energy consumption during use and stand-by
◙Limited use of substances harmful to the environment and health
◙Easily dismantled and recycled
◙Reduced use of natural resources by encouraging recycling
◙Extended product lifetime through easy upgrades
◙Reduced solid waste production through take-back policy
Environmental Policy
◙The product has been designed to enable proper reuse of parts and
recycling and should not be thrown away at its end of life�
◙Users should contact the local authorized point of collection for recycling
and disposing of their end-of-life products�
◙Visit the MSI website and locate a nearby distributor for further recycling
information�
◙Users may also reach us at gpcontdev@msi�com for information regarding
proper disposal, take-back, recycling, and disassembly of MSI products�
★ Warning! Overuse of screens is likely to aect eyesight.
★ Recommendations:
1� Take a 10-minute break for every 30 minutes of screen time�
2� Children under 2 years of age should have no screen time� For children aged
2 years and over, screen time should be limited to less than one hour per day�
Preface
viivi
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating
to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive
(2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/
EU)� This product has been tested and found to comply with the harmonized standards
for Information Technology Equipment published under Directives of Ocial Journal of
the European Union�
FCC-B Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules� These limits are designed to provide
reasonable protection against harmful interference in a residential installation� This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications� However, there is no guarantee that interference will not occur
in a particular installation� If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the measures
listed below:
￭Reorient or relocate the receiving antenna�
￭Increase the separation between the equipment and receiver�
￭Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected�
￭Consult the dealer or an experienced radio/television technician for help�
Notice 1
The changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment�
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits�
This device complies with Part 15 of the FCC Rules� Operation is subject to the following
two conditions:
1� this device may not cause harmful interference, and
2� this device must accept any interference received, including interference that may
cause undesired operation�
MSI Computer Corp�
901 Canada Court, City of Industry, CA 91748, USA
(626)913-0828
www�msi�com
Preface
viivi
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes eect on August
13, 2005, products of “electrical and electronic equipment” cannot be
discarded as municipal waste anymore and manufacturers of covered
electronic equipment will be obligated to take back such products at the end
of their useful life�
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation
(Regulation EC No� 1907/2006 of the European Parliament and the Council), MSI
provides the information of chemical substances in products at:
https://www�msi�com/html/popup/csr/evmtprtt_pcm�html
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, dened by specication JIS C 0950, mandates
that manufacturers provide material declarations for certain categories of electronic
products oered for sale after July 1, 2006.
https://www�msi�com/html/popup/csr/cemm_jp�html
https://tw�msi�com/html/popup/csr_tw/cemm_jp�html
India RoHS
This product complies with the "India E-waste (Management and Handling) Rule 2011"
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0�1 weight % and 0�01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule�
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved by
the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057,
in terms of restrictions for the use of certain dangerous substances in electrical and
electronic equipment�
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous
substances in electronic and electric products�
1
Getting Started
This chapter provides you with the information on hardware setup procedures�
While connecting devices, be careful in holding the devices and use a
grounded wrist strap to avoid static electricity�
IMPORTANT
•
The illustrations are for reference only� Your monitor may vary in appearance�
•
Do not use any sharp objects on the monitor�
Getting Started
1-31-2
Package Contents
1� Monitor
2� Stand
3� Stand Base with Screw
4� Power Adapter & Power Cord
5� HDMI Cable (optional)
6� USB Upstream Cable (optional)
7� Quick Start Guide
8� Warranty Card
* Contact your place of purchase or local distributor if any of the items is damaged or
missing�
* Package contents may vary by country�
Getting Started
1-31-2
Installing the Monitor Stand
Optix MAG273 (3CB6)
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel�
The holes for installing the stand can be also used for wall mount� Please contact your
dealer for proper wall mount kit�
1� Fit the stand to the monitor�
2� Push down the latch to lock the stand in place�
3� Connect the base to the stand and tighten the base screw to secure the base�
4� Place the cover properly and tighten the screws to secure the cover�
3
2
1
4
Getting Started
1-51-4
Optix MAG273R (3CB6)
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel�
The holes for installing the stand can be also used for wall mount� Please contact your
dealer for proper wall mount kit�
1� Fit the stand to the monitor�
2� Push down the latch to lock the stand in place�
3� Connect the base to the stand and tighten the base screw to secure the base�
3
2
1
Getting Started
1-51-4
Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment
capabilities such as tilt, lift and swivel�
IMPORTANT
Avoid touching the display panel when adjusting the monitor�
Optix MAG273 (3CB6)
-5
O
20
O
Optix MAG273R (3CB6)
130mm
-5
O
20
O
Getting Started
1-71-6
Monitor Overview
10
97
354 8
2
1
6
1Power Button
2Navi Key
3Kensington Lock
4Power Jack
Getting Started
1-71-6
5USB 2�0 Type-B Upstream Port
For USB Upstream Cable�
IMPORTANT
Check the package for USB Upstream
Cable and connect it to the PC and monitor�
Once this cable is connected, the USB Type
A Downstream Ports on the monitor will be
ready for use�
To Monitor
To PC
6USB Type-A Downstream Port
7DisplayPort
8HDMI Port
9Headphone Jack
10 MSI Macro Key
To activate Gaming OSD�
Getting Started
PB1-8
Connecting the Monitor to PC
1� Turn o your computer.
2� Connect the HDMI/DisplayPort cable from the monitor to your computer�
3� Assemble the monitor power adapter & power cord� (Figure A)
4� Connect the power adapter to the monitor power jack� (Figure B)
5� Plug the power cord into the electrical outlet� (Figure C)
6� Turn on the monitor� (Figure D)
7� Power on the computer then monitor will auto detect signal source�
A
B
C
D
2
OSD Setup
This chapter provides you with essential information on OSD Setup�
IMPORTANT
All information is subject to change without prior notice�
2-3
OSD Setup
2-2
Navi Key
The monitor comes with a Navi Key, a multi-directional control that helps navigate the
On-Screen Display (OSD) menu�
Navi Key
The Navi Key default settings are as follows�
Navi Key Hot Key
(When OSD menu is OFF)
Basic Operations
(When OSD menu is ON)
Middle Button OSD Main Menu ■Entering submenus
■ Conrming a selection or
setting
2-3
OSD Setup
2-2
Navi Key Hot Key
(When OSD menu is OFF)
Basic Operations
(When OSD menu is ON)
Up Game Mode ■Press Middle Button
to conrm selection
and exit�
■Press Up and Down
Buttons to adjust�
■Press Left Button to
cancel preview and
exit without applying
mode eect.
■Selecting function menus
and items
■Allowing upward
adjustment in function
values
Down Screen Assistance ■Press Middle Button
to conrm selection
and exit�
■Press Up and Down
Buttons to adjust�
■Press Left Button
to cancel preview
and exit�
■Selecting function menus
and items
■Allowing downward
adjustment in function
values
Left Alarm Clock ■Press Middle Button
to conrm selection
and exit�
■Press Up and Down
Buttons to select�
■Press Left Button
to cancel preview
and exit�
■Selecting function menus
and items
■Exiting the current menu
Right Input Source ■Press Middle Button
to conrm selection
and exit�
■Press Up and Down
Buttons to select�
■Press Left Button
to exit�
■Selecting function menus
and items
■Entering submenus
2-5
OSD Setup
2-4
Users may enter the OSD Menu to customize their own Navi Key Hot Keys.
More Hot Key options are as below�
Navi Key Hot Key Options Operations
Brightness ■Press Middle Button to save value and exit�
■Press Up and Down Buttons to adjust�
■Press Left Button to cancel preview and exit�
Refresh Rate ■ Press Middle Button to conrm selection and exit.
■Press Right Button to turn on and Left Button to
turn o the Refresh Rate.
Informaion on
Screen
■ Press Middle Button to conrm selection and exit.
■Press Right Button to turn on and Left Button to
turn o this function.
2-5
OSD Setup
2-4
OSD Setup via Navi Key
Press the Middle button of Navi Key to launch the On-Screen Display (OSD) main
menu� Use the Up, Down, Left, Right buttons to tune the desired function menus to
suit your personal preferences�
hGaming
1st Level Menu 2nd/3rd Level Menu Description
Game Mode User All items can be adjusted by users�
FPS All items can be adjusted by users�
Racing All items can be adjusted by users�
RTS All items can be adjusted by users�
RPG All items can be adjusted by users�
■ Use Up or Down Button to select and preview mode eects.
■ Press the Middle Button to conrm and apply your mode type.
Night Vision OFF This function optimizes background brightness
and is recommended for FPS games�
Normal
Strong
Strongest
A�I�
Response Time Normal ■Users can adjust Response Time in any
Mode�
■This function is recommended for FPS and
Racing games�
■When Anti Motion Blur is set to ON,
Response Time will be grayed out�
Fast
Fastest
2-7
OSD Setup
2-6
1st Level Menu 2nd/3rd Level Menu Description
Anti Motion Blur (OFF) ■Brightness cannot be adjusted when Anti
Motion Blur is set to ON.
■When Screen Refresh Rate is lower than
75HZ, Anti Motion Blur cannot be enabled.
■This function is recommended for cinema,
FPS and Racing games.
■Anti Motion Blur and HDCR cannot be
enabled simultaneously.
■Anti Motion Blur and FreeSync cannot be
enabled simultaneously.
(ON)
Refresh Rate Location Left Top ■Users can adjust Refresh Rate in any Mode.
■Default Refresh Rate Location is Left Top.
Location is adjustable in OSD Menu. Press
the Middle Button to conrm and apply your
Refresh Rate Location.
■This monitor follows and works at the
Operating System’s preset Screen Refresh
Rate.
Right Top
Left Bottom
Right Bottom
Customize
OFF
ON
Alarm Clock Location Left Top ■Users can adjust Alarm Clock in any Mode.
■After setting the time, press the Middle
Button to activate the timer.
■Default Alarm Clock Location is Left Top.
Users can select their own location.
Right Top
Left Bottom
Right Bottom
Customize
15:00 00:01~99:59
30:00
45:00
60:00
Screen
Assistance
None ■Users can adjust Screen Assistance in any
Mode.
■Screen Assistance default is None.
■When set to Reset, Icon will be reset to
center.
■While set to Position, the OSD Menu will
be closed and only show “Icon” on display
for Postion adjustment, until press middle
button to exit and the OSD Menu will
appear.
Icon
Position
Reset
FreeSync (OFF) ■Default is OFF. FreeSync is a united switch,
if HDMI set to OFF, each input source will
also set to OFF.
■Only DisplayPort can enable G-SYNC
Compatible for NVIDIA graphics card.
■ Enabling FreeSync will aect Anti Motion
Blur.
(ON)
2-7
OSD Setup
2-6
hProfessional
1st Level Menu 2nd Level Menu Description
Pro Mode User Default mode� All items can be adjusted by users�
Reader All items can be adjusted by users�
Cinema All items can be adjusted by users�
Designer All items can be adjusted by users�
HDR All items can be adjusted by users�
■ Use Up or Down Button to select and preview mode eects.
■ Press the Middle Button to conrm and apply your mode type.
Eye Saver (OFF) ■Eye Saver protects your eyes against blue light�
When enabled, Eye Saver adjusts the screen color
temperature to a more yellow glow�
■Users can adjust Eye Saver in any Mode�
■When Pro Mode is set to Reader, it is mandatory to
enable Eye Saver�
(ON)
HDCR (OFF) ■Users can adjust HDCR in any Mode�
■HDCR enhances image quality by increasing the
contrast of images�
■When HDCR is set to ON, Brightness will be
grayed out�
■HDCR and Anti Motion Blur cannot be enabled
simultaneously�
(ON)
Anti Motion Blur (OFF) ■Brightness cannot be adjusted when Anti Motion
Blur is set to ON�
■When Screen Refresh Rate is lower than 75HZ,
Anti Motion Blur cannot be enabled�
■This function is recommended for cinema, FPS and
Racing games�
■Anti Motion Blur and HDCR cannot be enabled
simultaneously�
■Anti Motion Blur and FreeSync cannot be enabled
simultaneously�
(ON)
Image
Enhancement
OFF ■Image Enhancement enhances image edges to
improve their acutance�
■Users can adjust Image Enhancement in any
Mode�
Weak
Medium
Strong
Strongest
2-9
OSD Setup
2-8
hImage
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ■Users can adjust Brightness in User, RTS,
RPG and Reader mode�
■Brightness will be grayed out when Anti Motion
Blur and HDCR are enabled�
Contrast 0-100 ■Users can adjust Contrast in any Mode�
Sharpness 0-5 ■Users can adjust Sharpness in any Mode�
■Sharpness improves clarity and details of
images�
Color
Temperature
Cool ■Color Temperature default is Normal�
■Use Up or Down Button to select and preview
mode eects.
■ Press the Middle Button to conrm and apply
your mode type�
■Users can adjust Color Temperature in
Customization mode.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Screen Size Auto ■ Users can adjust Screen Size in any mode, any
resolution and any screen refresh rate�
4:3
16:9
hInput Source
1st Level Menu Description
HDMI1 Users can adjust Input Source in any Mode�
HDMI2
DP
hNavi Key
1st Level Menu 2nd Level Menu Description
Up
Down
Left
Right
OFF ■Up Button default is Game Mode�
■Down Button default is Screen Assistance�
■Left Button default is Alarm Clock�
■Right Button default is Input Source�
■All Navi Key items can be adjusted via OSD Menu�
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
Refresh Rate
Information on
Screen
2-9
OSD Setup
2-8
hSetting
1st Level Menu 2nd Level Menu Description
Language 繁體中文 ■Language factory default is English�
■ Users have to press the Middle Button to conrm
and apply the Language setting�
■Language is an independent setting� Users’ own
language setting will override the factory default�
When users set Reset to Yes, Language will not
be changed�
English
Français
Deutsch
Italiano
Español
한국어
日本語
Русский
Português
简体中文
ไทย
Bahasa Indonesia
Türkçe
(More languages
coming soon)
Transparency 0~5 Users can adjust Transparency in any Mode�
OSD Time Out 5-30s Users can adjust OSD Time Out in any Mode�
RGB LED OFF Users can adjust RGB LED to On or O.
ON
Power Button OFF When set to OFF, users can press power button to
close monitor�
Standby When set to Standby, users can press power button
to tune o panel and backlight.
Information on
Screen OFF ■The information of the monitor status will be
showed on the right side of the screen�
■Users can enable or disable the Information on
Screen� Default is OFF�
ON
Reset YES Users can Reset and restore settings to original OSD
Default in any Mode�
NO
A
Appendix
IMPORTANT
All information is subject to change without prior notice�
Appendix
A-3A-2
Specications
Model Optix MAG273 (3CB6) Optix MAG273R (3CB6)
Size 27 inch
Curvature Flat
Panel Type IPS
Resolution 1920 x 1080
Aspect Ratio 16:9
Brightness (nits) 250
Contrast Ratio 1000:1
Refresh Rate 144Hz
Response Time 1ms (MPRT)
Input Interface ■HDMI Port x2
■DisplayPort x1
I/O ■HDMI Port x2
■DisplayPort x1
■USB 2�0 Type A x2 (Rear side)
■USB 2�0 Type B x1 (Rear side for PC to Monitor)
■ Headphone Jack x1
View Angles 178°(H) , 178°(V)
sRGB / DCI-P3* 139%/ 98%
Surface Treatment Anti-glare
Display Colors 1�07B
Power Type External Power Adapter
Adapter Spec� Model: SOY-1200500/ SUN-1200500
Power Input 100~240Vac, 50~60Hz, 1.7A
Power Output 12V, 5A
Adjustment (Tilt) -5° ~ 20° -5° ~ 20°
Adjustment (Height) No 130mm
Kensington Lock Yes
VESA Mounting ■Plate Type: 100 x 100mm
■Screw Type: M4 x 10mm
▶Thread Diameter: 4mm
▶Thread Pitch: 0�7mm
▶Thread Length: 10mm
Dimension (W x D x H) 616�8 x 228�63 x 447 mm 616�8 x 266�5 x 551�4 mm
Net Weight 5�15 kg (11�33 lb) 6�14 kg (13�51 lb)
Appendix
A-3A-2
Model Optix MAG273 (3CB6) Optix MAG273R (3CB6)
Environment Operating Temperature: 0°C to 40°C
Humidity: 20% to 90%, non-condensing
Altitude: 0 ~ 2000m
Storage Temperature: -20°C to 60°C
Humidity: 10% to 90%, non-condensing
* Based on CIE1976 test standards�
Appendix
A-5A-4
Preset Display Modes
Standard Resolution Optix MAG273 (3CB6)/ Optix MAG273R (3CB6)
HDMI1 HDMI2 DP
VGA 640x480 @60Hz VVV
640x480 @67Hz VVV
640x480 @72Hz VVV
640x480 @75Hz VVV
Dos-Mode 720x480 @60Hz VVV
SVGA 800x600 @56Hz VVV
800x600 @60Hz VVV
800x600 @72Hz VVV
800x600 @75Hz VVV
XGA 1024x768 @60Hz VVV
1024x768 @70Hz VVV
1024x768 @75Hz VVV
SXGA 1280x1024 @60Hz VVV
1280x1024 @75Hz VVV
1280x1024 @120Hz VVV
WXGA+ 1440x900 @60Hz VVV
1440x900 @120Hz VVV
WSXGA+ 1680x1050 @60Hz VVV
1680x1050 @120Hz VVV
Full HD 1920x1080 @60Hz VVV
1920x1080 @120Hz VVV
1920x1080 @144Hz VVV
Video Timing
Resolution
480P V V V
576P V V V
720P V V V
1080i V V V
1080P V V V
1080P @120Hz VVV
Appendix
A-5A-4
Troubleshooting
The power LED is o.
■Press the monitor power button again�
■Check if the monitor power cable is properly connected�
No image�
■Check if the computer graphics card is properly installed�
■Check if the computer and monitor are connected to electrical outlets and
are turned on�
■Check if the monitor signal cable is properly connected�
■The computer may be in Standby mode� Press any key to activate the
monitor�
The screen image is not properly sized or centered�
Refer to Preset Display Modes to set the computer to a setting suitable for the
monitor to display�
No Plug & Play�
■Check if the monitor power cable is properly connected�
■Check if the monitor signal cable is properly connected�
■Check if the computer and graphics card are Plug & Play compatible�
The icons, font or screen are fuzzy, blurry or have color problems�
■Avoid using any video extension cables�
■Adjust brightness and contrast�
■Adjust RGB color or tune color temperature�
■Check if the monitor signal cable is properly connected�
■Check for bent pins on the signal cable connector�
The monitor starts ickering or shows waves.
■Change the refresh rate to match the capabilities of your monitor�
■Update your graphics card drivers�
■Keep the monitor away from electrical devices that may cause
electromagnetic interference (EMI)�
