Table of Contents
MSI MPG27CQ2 User Manual
Displayed below is the user manual for MPG27CQ2 by MSI which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Optix Series
LCD Monitor
Optix MPG27C, Optix MPG27CQ,
Optix MPG27CQ2
Preface
iiiii
Contents
Copyright and Trademarks Notice ��������������������������������������������������������������������������iii
Revision ������������������������������������������������������������������������������������������������������������������iii
Technical Support ���������������������������������������������������������������������������������������������������iii
Safety Instructions ���������������������������������������������������������������������������������������������������iv
CE Conformity ���������������������������������������������������������������������������������������������������������vi
FCC-B Radio Frequency Interference Statement ���������������������������������������������������vi
WEEE Statement ���������������������������������������������������������������������������������������������������vii
Chemical Substances Information �������������������������������������������������������������������������vii
RoHS Statement ����������������������������������������������������������������������������������������������������vii
1. Getting Started ................................................... 1-1
Package Contents ������������������������������������������������������������������������������������������������1-2
Installing the Monitor Stand ����������������������������������������������������������������������������������1-3
Adjusting the Monitor �������������������������������������������������������������������������������������������1-4
Monitor Overview �������������������������������������������������������������������������������������������������1-5
Connecting the Monitor to PC ������������������������������������������������������������������������������1-7
Wall Mounting (Optional) ��������������������������������������������������������������������������������������1-8
2. OSD Setup .......................................................... 2-1
Navi Key ���������������������������������������������������������������������������������������������������������������2-2
OSD Setup via Navi Key ��������������������������������������������������������������������������������������2-5
Appendix ................................................................A-1
�������������������������������������������������������������������������������������������������������A-2
Preset Display Modes ������������������������������������������������������������������������������������������A-4
Troubleshooting ���������������������������������������������������������������������������������������������������A-5
Preface
iiiii
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co�, Ltd� All rights reserved� The MSI logo used is a registered
trademark of Micro-Star Int’l Co�, Ltd� All other marks and names mentioned may be
trademarks of their respective owners� No warranty as to accuracy or completeness is
expressed or implied� MSI reserves the right to make changes to this document without
prior notice�
Revision
Revision Date
V1�1 2018/08
Technical Support
If a problem arises with your product and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor� Alternatively, please
visit https://www�msi�com/support/ for further guidance�
Preface
viv
Safety Instructions
Read the safety instructions carefully and thoroughly�
All cautions and warnings on the device or user’s manual should be noted�
Keep the User’s Guide that comes with the package for future reference�
temperature�
Make sure that the power voltage is within its safety range and has been
adjusted properly to the value of 100~240V before connecting the device to
the power outlet� Do not disable the protective earth pin from the plug� The
device must be connected to an earthed mains socket-outlet�
The ventilator on the device is used for air convection and to prevent the device
from overheating� Do not cover the ventilator�
Do not leave the device in an unconditioned environment with a storage
temperature above 60OC or below -20OC, which may damage the device�
NOTE: The maximum operating temperature is around 40OC�
When cleaning the device, be sure to remove the power plug� Use a piece of soft
cloth rather than industrial chemical to clean the device� Never pour any liquid
into the opening; that could damage the device or cause electric shock�
Preface
viv
Place the power cord in a way that people are unlikely to step on it� Do not place
anything on the power cord�
Always keep strong magnetic or electrical objects away from the device�
If any of the following situations arises, get the device checked by service
personnel:
The power cord or plug is damaged�
Liquid has penetrated into the device�
The device has been exposed to moisture�
The device does not work well or you can not get it work according to user’s
manual�
The device has dropped and damaged�
The device has obvious sign of breakage�
Green Product Features
Reduced energy consumption during use and stand-by
Limited use of substances harmful to the environment and health
Easily dismantled and recycled
Reduced use of natural resources by encouraging recycling
Extended product lifetime through easy upgrades
Reduced solid waste production through take-back policy
Environmental Policy
The product has been designed to enable proper reuse of parts and
recycling and should not be thrown away at its end of life�
and disposing of their end-of-life products�
Visit the MSI website and locate a nearby distributor for further recycling
information�
Users may also reach us at gpcontdev@msi�com for information regarding
proper disposal, take-back, recycling, and disassembly of MSI products�
1� Take a 10-minute break for every 30 minutes of screen time�
2� Children under 2 years of age should have no screen time� For children aged
2 years and over, screen time should be limited to less than one hour per day�
Preface
viivi
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating
to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive
(2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU)�
European Union�
FCC-B Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules� These limits are
designed to provide reasonable protection against harmful interference in a residential
installation� This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications� However, there is no guarantee that
interference will not occur in a particular installation� If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning
one or more of the measures listed below:
Reorient or relocate the receiving antenna�
Increase the separation between the equipment and receiver�
the receiver is connected�
Consult the dealer or an experienced radio/television technician for help�
Notice 1
compliance could void the user’s authority to operate the equipment�
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits�
This device complies with Part 15 of the FCC Rules� Operation is subject to the following
two conditions:
1� this device may not cause harmful interference, and
2� this device must accept any interference received, including interference that may
cause undesired operation�
Preface
viivi
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
13, 2005, products of “electrical and electronic equipment” cannot be
discarded as municipal waste anymore and manufacturers of covered
electronic equipment will be obligated to take back such products at the end
of their useful life�
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation
(Regulation EC No� 1907/2006 of the European Parliament and the Council), MSI
provides the information of chemical substances in products at:
https://www�msi�com/html/popup/csr/evmtprtt_pcm�html
RoHS Statement
Japan JIS C 0950 Material Declaration
that manufacturers provide material declarations for certain categories of electronic
https://www�msi�com/html/popup/csr/cemm_jp�html
https://tw�msi�com/html/popup/csr_tw/cemm_jp�html
India RoHS
This product complies with the "India E-waste (Management and Handling) Rule 2011"
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0�1 weight % and 0�01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule�
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved by
in terms of restrictions for the use of certain dangerous substances in electrical and
electronic equipment�
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular
substances in electronic and electric products�
1
Getting Started
This chapter provides you with the information on hardware setup procedures�
While connecting devices, be careful in holding the devices and use a
grounded wrist strap to avoid static electricity�
IMPORTANT
The illustrations are for reference only� Your monitor may vary in appearance�
Do not use any sharp objects on the monitor�
Getting Started
1-31-2
Package Contents
1� Monitor
2� Stand
3� Stand Base with Screw
4� Power Adapter & Power Cord
5� HDMI Cable
6� DisplayPort Cable
7� Y-type Audio Cable (to enable the audio jacks on the monitor)
8� USB Upstream Cable (to enable the USB ports on the monitor)
9� Quick Start Guide
10� Warranty Card
* Contact your place of purchase or local distributor if any of the items is damaged or
missing�
* Package contents may vary by country�
Getting Started
1-31-2
Installing the Monitor Stand
1� Fit the stand to the monitor�
2� Push down the latch to lock the stand in place�
3� Connect the base to the stand and tighten the base screw to secure the base�
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel�
Unlock
Lock
1
2
3
Getting Started
1-51-4
Adjusting the Monitor
capabilities such as tilt, lift and swivel�
IMPORTANT
Avoid touching the display panel when adjusting the monitor�
25
O
120mm
80
O
Getting Started
1-51-4
Monitor Overview
9
11
12
73 54 8
2
10
1
6
13
1Power Button
2Navi Key
3Power Jack
4HDMI Port
5HDMI Port
6DisplayPort
Getting Started
1-71-6
7USB Type B Upstream Port
For USB Upstream Cable�
IMPORTANT
Check the package for USB
Upstream Cable and connect
it to the PC and monitor� Once
this cable is connected, the
USB Type A Downstream
Ports on the monitor will be
ready for use�
To Monitor
To PC
8Combo Audio Jack
For Y-type Audio Cable�
IMPORTANT
Check the package for Y-type
Audio Cable and connect it to
the PC and monitor� Once this
cable is connected, the audio
jacks on the monitor will be
ready for use�
To Monitor To PC
9Headphone Jack
10 Microphone Jack
11 USB Type A Downstream Port
12 USB Type A Downstream Port
13 Kensington Lock
Getting Started
1-71-6
Connecting the Monitor to PC
1�
2� Connect the HDMI/DisplayPort cable from the monitor to your computer�
3� Assemble the monitor power adapter & power cord� (Figure A)
4� Connect the power adapter to the monitor power jack� (Figure B)
5� Plug the power cord into the electrical outlet� (Figure C)
6� Turn on the monitor� (Figure D)
7� Select your Input Source at OSD menu and power on the computer�
A
B
C
D
Getting Started
PB1-8
Wall Mounting (Optional)
1� Release the base screw and detach the base�
2� Pull up the latch to unlock the stand�
3� Disassemble the stand�
4� Remove the pre-installed screws for VESA mount�
5� Install the wall mounting bracket to the monitor�
6� Follow the wall mounting kit instructions to mount the monitor onto the wall�
IMPORTANT
Place the monitor on a soft, protected surface to avoid scratching the display panel�
When mounting this monitor to the wall, be sure to keep it at a proper distance from
Unlock
Lock
1
2
3
4
5
6
2
OSD Setup
This chapter provides you with essential information on OSD Setup�
IMPORTANT
All information is subject to change without prior notice�
2-3
OSD Setup
2-2
Navi Key
The monitor comes with a Navi Key, a multi-directional control that helps navigate the
On-Screen Display (OSD) menu�
Navi Key
2-3
OSD Setup
2-2
The Navi Key default settings are as follows�
Navi Key Hot Key
(When OSD menu is OFF)
Basic Operations
(When OSD menu is ON)
Middle Button OSD Main Menu Entering submenus
setting
Up Game Mode Press Middle
selection and exit�
Press Up and
Down Buttons to
adjust�
Press Left Button
to cancel preview
and exit without
applying mode
Selecting function menus
and items
Allowing upward adjustment
in function values
Down Screen Assistance Press Middle
selection and exit�
Press Up and
Down Buttons to
adjust�
Press Left Button
to cancel preview
and exit�
Selecting function menus
and items
Allowing downward
adjustment in function values
Left Alarm Clock Press Middle
selection and exit�
Press Up and
Down Buttons to
select�
Press Left Button
to cancel preview
and exit�
Selecting function menus
and items
Exiting the current menu
Right Input Source Press Middle
selection and exit�
Press Up and
Down Buttons to
select�
Press Left Button
to exit�
Selecting function menus
and items
Entering submenus
2-5
OSD Setup
2-4
More Hot Key options are as below�
Navi Key Hot Key Options Operations
Brightness Press Middle Button to save value and exit�
Press Up and Down Buttons to adjust�
Press Left Button to cancel preview and exit�
Brightness default is 80�
PIP/PBP
exit�
Press Up and Down Buttons to adjust�
Press Left Button to cancel preview and exit�
Refresh Rate
exit�
Press Right Button to turn on and Left Button to
2-5
OSD Setup
2-4
OSD Setup via Navi Key
Press the Middle button of Navi Key to launch the On-Screen Display (OSD) main
menu� Use the Up, Down, Left, Right buttons to tune the desired function menus to
suit your personal preferences�
hGAMING
1st Level Menu 2nd/3rd Level Menu Description
Game Mode User Default mode� All items can be adjusted by users�
FPS All items can be adjusted by users�
Racing All items can be adjusted by users�
RTS All items can be adjusted by users�
RPG All items can be adjusted by users�
Black Tuner 0-20 Use Up or Down Button to adjust the value�
This function improves background brightness and
is recommended for FPS games�
Response Time Normal Users can adjust Response Time in any Mode�
When Response Time is set to Fastest with at least
automatically enabled�
When Screen Refresh Rate is lower than 75HZ,
“Fastest” will be grayed out�
This function is recommended for FPS and Racing
games�
Fast
Fastest
2-7
OSD Setup
2-6
1st Level Menu 2nd/3rd Level Menu Description
Anti Motion Blur (OFF) Brightness cannot be adjusted when Anti Motion
Blur is set to ON�
When Response Time is set to Fastest with at least
automatically enabled�
When Screen Refresh Rate is lower than 75HZ,
Anti Motion Blur cannot be enabled and Response
Time cannot be set to Fastest�
When Anti Motion Blur is enabled, HDCR cannot
be enabled and will be grayed out�
This function is recommended for cinema, FPS and
Racing games�
When FreeSync is enabled, Anti Motion Blur will be
grayed out�
(ON)
Zero Latency (OFF) Zero Latency default is ON�
Zero Latency helps to reduce the signal throughput
timing and supports QHD only�
(ON)
Refresh Rate Location Left Top Users can adjust Refresh Rate in any Mode�
Default Refresh Rate Location is Left Top� Location
is adjustable in OSD Menu� Press the Middle
Location�
This monitor follows and works at the Operating
System’s preset Screen Refresh Rate�
Right Top
Left Bottom
Right Bottom
OFF
ON
Alarm Clock Location Left Top Users can adjust Alarm Clock in any Mode�
After setting the time, press the Middle Button to
activate the timer�
Default Alarm Clock Location is Left Top� Users
can select their own location�
Right Top
Left Bottom
Right Bottom
OFF
15:00 00:01~99:59
30:00
45:00
60:00
Screen
Assistance None Users can adjust Screen Assistance in any Mode�
Screen Assistance default is None�
FreeSync (OFF) FreeSync prevents screen tearing�
HDMI default is ON but grayed out (cannot be
changed)�
DisplayPort default is ON and can be adjusted ON/
OFF in any mode, any resolution, any input source
and any screen refresh rate�
When FreeSync is enabled, Anti Motion Blur will be
grayed out�
(ON)
2-7
OSD Setup
2-6
hProfessional
1st Level Menu 2nd Level Menu Description
Pro Mode User Default mode� All items can be adjusted by users�
Reader All items can be adjusted by users�
Cinema All items can be adjusted by users�
Designer All items can be adjusted by users�
Eye Saver (OFF) Eye Saver protects your eyes against blue light�
When enabled, Eye Saver adjusts the screen color
temperature to a more yellow glow�
Users can adjust Eye Saver in any Mode�
When Pro Mode is set to Reader, it is mandatory to
enable Eye Saver�
(ON)
HDCR (OFF) HDCR default is OFF� Users can adjust HDCR in
any Mode�
HDCR enhances image quality by increasing the
contrast of images�
When HDCR is set to ON, Brightness will be
grayed out�
HDCR and Anti Motion Blur cannot be enabled
simultaneously�
When HDCR is enabled, Anti Motion Blur cannot
be enabled and Response Time cannot be set to
Fastest�
(ON)
Anti Motion Blur (OFF) Brightness cannot be adjusted when Anti Motion
Blur is set to ON�
When Response Time is set to Fastest with at least
automatically enabled�
When Screen Refresh Rate is lower than 75HZ,
Anti Motion Blur cannot be enabled and Response
Time cannot be set to Fastest�
When Anti Motion Blur is enabled, HDCR cannot
be enabled and will be grayed out�
This function is recommended for cinema, FPS and
Racing games�
When FreeSync is enabled, Anti Motion Blur will be
grayed out�
(ON)
Image
Enhancement OFF Image Enhancement enhances image edges to
improve their acutance�
Users can adjust Image Enhancement in any
Mode�
Weak
Medium
Strong
Strongest
2-9
OSD Setup
2-8
hImage
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 Brightness default is 80�
Users can adjust Brightness in User, RTS, RPG
and Reader mode�
Brightness will be grayed out when Anti Motion
Blur and HDCR are enabled�
Contrast 0-100 Contrast default of Optix MPG27C is 80�
Contrast default of Optix MPG27CQ / MPG27CQ2
is 50�
Users can adjust Contrast in any Mode�
Sharpness 0-5 Sharpness default is 0� Users can adjust
Sharpness in any Mode�
Sharpness improves clarity and details of images�
Color
Temperature Cool Color Temperature default is Normal�
Use Up or Down Button to select and preview
mode type�
Users can adjust Color Temperature in
Normal
Warm
R (0-100)
G (0-100)
B (0-100)
19”
resolution and any screen refresh rate�
19” and 24” are available for Optix MPG27CQ /
MPG27CQ2 only�
24”
4:3
16:9
hInput Source
1st Level Menu Description
HDMI1 Users can adjust Input Source in any Mode�
HDMI2
DP
2-9
OSD Setup
2-8
hPIP/PBP (For Optix MPG27CQ / MPG27CQ2
only)
1st Level Menu 2nd/3rd Level Menu Description
OFF PIP (Picture in Picture) allows users to
simultaneously display multiple video sources
on one screen� One program is displayed on
the full screen at the same time as one or
more other programs are displayed in inset
windows�
PBP (Picture by Picture) is a similar feature
that displays two input sources side-by-side
on the screen�
PIP/PBP default is OFF�
Display Switch allows users to switch between
primary and secondary input sources�
Audio Switch allows users to switch between
primary and secondary digital audio sources�
PIP Source HDMI1
HDMI2
DP
Small
Medium
Large
Location Left Top
Right Top
Left Bottom
Right Bottom
Display Switch
Audio Switch
PBP Source HDMI1
HDMI2
DP
Display Switch
Audio Switch
2-11
OSD Setup
2-10
hNavi Key
1st Level Menu 2nd Level Menu Description
Up OFF Up Button default is Game Mode�
Down Button default is Screen Assistance�
Left Button default is Alarm Clock�
Right Button default is Input Source�
All Navi Key items can be adjusted via OSD Menu�
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
PIP/PBP Mode
Refresh Rate
Down OFF
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
PIP/PBP Mode
Refresh Rate
Left OFF
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
PIP/PBP Mode
Refresh Rate
Right OFF
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
PIP/PBP Mode
Refresh Rate
2-11
OSD Setup
2-10
hSetting
1st Level Menu 2nd Level Menu Description
Language Language factory default is English�
and apply the Language setting�
Language is an independent setting� Users’ own
language setting will override the factory default�
When users set Reset to Yes, Language will not
be changed�
English
Français
Deutsch
Italiano
Español
Português
Bahasa Indonesia
Türkçe
(More languages coming
soon)
Transparency 0~5 Transparency default is 0� Users can adjust
Transparency in any Mode�
OSD Time Out 5-30s OSD Time Out default is 20s� Users can adjust OSD
Time Out in any Mode�
Audio Source Analog Audio Source default is Digital� Users can adjust
Audio Source in any Mode�
Digital
RGB LED OFF RGB LED default is On� Users can adjust RGB LED
ON
Reset YES Users can Reset and restore settings to original OSD
Default in any Mode�
NO
A
Appendix
IMPORTANT
All information is subject to change without prior notice�
Appendix
A-3A-2
Specications
Model Optix MPG27C Optix MPG27CQ Optix MPG27CQ2
Size 27 inch
Curvature 1800R
Panel Type VA
Resolution 1920 x
Aspect Ratio 16:9
Brightness (nits) 250 400
Contrast Ratio 3000:1
Refresh Rate
Response Time 1ms (MPRT)
4ms (GTG)
Input Interface HDMI x2, DP x1
I/O USB 2�0 Type
A x2
USB 3�1 Gen 1
Type B x1 (with
USB 2�0 signal,
for PC to Monitor)
Mic in x1
Headphone
out x1
Audio combo jack
x1 (for PC’s Mic in
and Headphone
out to Monitor)
USB 3�1 Gen 1 Type A x2
USB 3�1 Gen 1 Type B x1 (for PC to
Monitor)
Mic in x1
Headphone out x1
Audio combo jack x1 (for PC’s Mic in and
Headphone out to Monitor)
View Angles 178°(H) , 178°(V)
NTSC / sRGB * 100% / 115%
Surface Treatment Anti-glare
Display Colors 16�7M
Power Type External Adapter
Power Consumption
(Typical)
65W 90W
Power Input
Power Output 19V 3.42A
20V 3.25A
19V 4.74A
20V 4.5A
Adjustment (Tilt) -5° ~ 20°
Adjustment (Swivel) -40° ~ 40°
Adjustment (Height) 0 ~ 120mm
Kensington Lock Yes
Appendix
A-3A-2
Model Optix MPG27C Optix MPG27CQ Optix MPG27CQ2
VESA Mounting Plate Type: 100 x 100mm
Screw Type: M4x10mm
Thread Diameter: 4mm
Thread Pitch: 0�7mm
Thread Length: 10mm
Dimension (W x H x D) 612 x 555�8 x 379�3 mm 612 x 555�8 x
252�65 mm
Net Weight 7�3 kg (16�10 lb) 7�14 kg (15�74 lb)
Environment Operating Temperature: 0°C to 40°C
Humidity: 20% to 90%, non-condensing
Altitude: 0 ~ 5000m
Storage Temperature: -20°C to 60°C
Humidity: 10% to 90%, non-condensing
* NTSC and sRGB are based on CIE1976 test standards�
Appendix
A-5A-4
Preset Display Modes
Standard Resolution Optix MPG27C Optix MPG27CQ /
MPG27CQ2
HDMI / DP HDMI / DP
VGA V V
V V
V V
V V
Dos-Mode V V
SVGA V V
V V
V V
V V
XGA V V
V V
V V
XGA+ V V
SXGA V V
V V
WXGA V V
VESA V V
SDTV V V
V V
V V
1440x480P @60HZ V V
1440x576P @50HZ V V
HDTV V V
V V
V V
1920x1080P @60HZ V V
1920x1080I @50HZ V V
1920x1080I @60HZ V V
WXGA+ V V
WSXGA+ V V
Full HD V V
V V
V V
WQHD V
V
V
V
Appendix
A-5A-4
Troubleshooting
The power LED is o.
Press the monitor power button again�
Check if the monitor power cable is properly connected�
No image.
Check if the computer graphics card is properly installed�
Check if the computer and monitor are connected to electrical outlets and
are turned on�
Check if the monitor signal cable is properly connected�
The computer may be in Standby mode� Press any key to activate the
monitor�
The screen image is not properly sized or centered.
Refer to Preset Display Modes to set the computer to a setting suitable for the
monitor to display�
No Plug & Play.
Check if the monitor power cable is properly connected�
Check if the monitor signal cable is properly connected�
Check if the computer and graphics card are Plug & Play compatible�
The icons, font or screen are fuzzy, blurry or have color problems.
Avoid using any video extension cables�
Adjust brightness and contrast�
Adjust RGB color or tune color temperature�
Check if the monitor signal cable is properly connected�
Check for bent pins on the signal cable connector�
The monitor starts ickering or shows waves.
Change the refresh rate to match the capabilities of your monitor�
Update your graphics card drivers�
Keep the monitor away from electrical devices that may cause
electromagnetic interference (EMI)�