Table of Contents
MSI MPG321URDE QD User Manual
Displayed below is the user manual for MPG321URDE QD by MSI which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Optix Series
LCD Monitor
Optix MPG321UR-QD (3DC0)
Optix MPG321QRF-QD (3DB8)
User Guide
2Contents
Contents
Getting Started .............................................................................................................. 3
Package Contents ................................................................................................... 3
Installing the Monitor Stand ................................................................................... 4
Adjusting the Monitor ............................................................................................. 5
Monitor Overview .................................................................................................... 6
Connecting the Monitor to PC .............................................................................. 10
OSD Setup ................................................................................................................... 11
Navi Key ................................................................................................................ 11
Hot Key .................................................................................................................. 11
OSD Menus.................................................................................................................. 12
G.I. ......................................................................................................................... 12
Gaming .................................................................................................................. 14
Professional .......................................................................................................... 16
Image .................................................................................................................... 17
Input Source ......................................................................................................... 17
PIP/PBP ................................................................................................................ 18
Navi Key ................................................................................................................ 19
Setting ................................................................................................................... 20
Specifications .............................................................................................................. 22
Preset Display Modes ................................................................................................ 24
Troubleshooting.......................................................................................................... 27
Safety Instructions ...................................................................................................... 28
TÜV Rheinland Certification....................................................................................... 30
Regulatory Notices ..................................................................................................... 31
Revision
V1.0, 2021/09
3
Getting Started
Getting Started
This chapter provides you with the information on hardware setup procedures. While
connecting devices, be careful in holding the devices and use a grounded wrist strap
to avoid static electricity.
Package Contents
Monitor Optix MPG321UR-QD
Optix MPG321QRF-QD
Documentation Quick Start Guide
Registration Card
Accessories
Stand with Screw(s)
Stand Base with Screw(s)
Screw(s) for Wall Mount Bracket(s)
Power Cord
Mouse Bungee (Optional)
Cables
HDMI Cable (Optional)
DisplayPort Cable (Optional)
USB Type-C Cable (Optional)
Y-Type Audio Cable (for audio jacks on the monitor)
(Optional)
USB Upstream Cable (for USB Type-B Upstream Port)
(Optional)
⚠
Important
∙
Contact your place of purchase or local distributor if any of the items is damaged or
missing.
∙
Package contents may vary by country.
∙
The included power cord is exclusively for this monitor and should not be used with
other products.
4Getting Started
Installing the Monitor Stand
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the
monitor groove.
2. Tighten the stand bracket with screws.
3. Connect the base to the stand and tighten the base screw to secure the base.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.
⚠
Important
∙
Place the monitor on a soft, protected surface to avoid scratching the display panel.
∙
Do not use any sharp objects on the panel.
∙
The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit.
1
2
3
5
Getting Started
Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment
capabilities.
⚠
Important
∙
Avoid touching the display panel when adjusting the monitor.
∙
Please slightly tilt the monitor backwards before pivoting it.
30
O
30
O
100mm
-5
O
20
O
6Getting Started
Monitor Overview
Optix MPG321UR-QD
1
2 3
4
5
6
8
7
9
10
11
13 14 15 9 1612
2
12 13 12 9
7
Getting Started
Optix MPG321QRF-QD
1
2 3
4
5
6
8
7
17
10
11
2
14 15 17 1613 13 18
8Getting Started
1Macro Key
To activate OSD Application.
2Microphone
3Light Sensor
4Power Button
5Cable Routing Hole
6Navi Key
7Kensington Lock
8Power Jack
9USB 2.0 Type-A Port
10 Microphone Jack
11 Headphone Jack
12 USB 2.0 Type-B Upstream Port
For USB Upstream Cable.
⚠
Important
Check the package for USB Upstream Cable
and connect it to the PC and monitor. Once
this cable is connected, the USB Type-A
Downstream Ports on the monitor will be
ready for use.
To PC
To Monitor
13 HDMI Port
14 DisplayPort
15 USB Type-C Port
This port supports DisplayPort Alternate (DP Alt) Mode and up to 5V/3A
power delivery.
9
Getting Started
16 Combo Audio Jack
17 USB 3.2 Gen 1 Type-A Port
18 USB 3.2 Gen1 Type-B Upstream Port
For USB Upstream Cable.
⚠
Important
Check the package for USB Upstream Cable
and connect it to the PC and monitor. Once
this cable is connected, the USB Type-A
Downstream Ports on the monitor will be
ready for use.
To PC
To Monitor
10 Getting Started
Connecting the Monitor to PC
1. Turn off your computer.
2. Connect the video cable from the monitor to your computer.
3. Connect the power cord to the monitor power jack. (Figure A)
4. Plug the power cord into the electrical outlet. (Figure B)
5. Turn on the monitor. (Figure C)
6. Power on the computer and the monitor will auto detect the signal source.
A
C
B
11
OSD Setup
OSD Setup
This chapter provides you with essential information on OSD Setup.
⚠
Important
All information is subject to change without prior notice.
Navi Key
The monitor comes with a Navi Key, a multi-directional control that helps navigate the
On-Screen Display (OSD) menu.
Up/Down/Left/Right:
∙selecting function menus and items
∙adjusting function values
∙entering into/exiting from function menus
Press (OK):
∙launching the On-Screen Display (OSD)
∙entering submenus
∙confirming a selection or setting
Hot Key
∙Users may enter into preset function menus by moving the Navi Key up, down, left or
right when the OSD menu is inactive.
∙Users may customize their own Hot Keys to enter into different function menus.
12 OSD Menus
OSD Menus
⚠
Important
When receiving HDR signals, Night Vision, MPRT Sync, Low Blue Light, HDCR,
Brightness, Contrast, Color Temperature, Optix Scope, Auto Brightness Control,
Ambient RGB Light and PIP/PBP will be grayed out.
G.I.
1st Level Menu 2nd Level Menu Description
Auto
Brightness
Control
OFF ∙Through the internal Light Sensor
and AI (Artificial Intelligence)
algorithm, this function
detects the ambient light and
automatically sets the monitor to
optimal brightness for users.
∙When Auto Brightness Control
is set to Auto or Customize, the
Brightness of OSD will be grayed
out.
∙Customize allows users to adjust
the auto brightness curve.
∙HDCR and MPRT Sync will be set
to OFF while Auto or Customize is
selected.
Auto
Customize
13
OSD Menus
Ambient RGB
Light
OFF ∙Through the internal RGB Sensor
and AI algorithm, this function
detects the ambient color
temperature and presents the
best light effects synced to the
environment.
∙The Color Temperature of OSD
will be grayed out while this
function is enabled.
ON
Sound Tune OFF ∙Through the internal digital array
microphone and AI algorithm,
this function enables Active Noise
Cancellation (ANC) technology.
∙For Sound Tune to properly
work, the computer needs to be
connected to the USB Upstream
port of the monitor.
ON
KVM Auto ∙Auto allows the monitor to
automatically switch between USB
input sources, such as keyboards,
mice or other USB devices.
∙Users can also designate
Upstream port or USB Type-C as
the only USB signal source.
Upstream
Type-C
Smart
Crosshair
Icon None ∙Through AI algorithm, this
function enhances the visibility of
in-game crosshair.
∙Users can select the color and
position of the crosshair.
Color White
Red
Auto
Position
Reset
14 OSD Menus
Optix Scope Scope Size Small ∙The center point will zoom in
when Optix Scope is enabled, user
can adjust the details through
the Scope Size and Scope Ratio
settings.
∙Smart Crosshair and Optix Scope
can be enabled at the same time.
∙PIP/PBP, Adaptive Sync, and
MPRT Sync will be set to OFF
while Optix Scope function is
enabled.
∙Screen Size 1:1 will be set to Auto
while Optix Scope function is
enabled.
Medium
Large
Scope Ratio x1.5
x2
x4
OFF
ON
Gaming
1st Level Menu 2nd/3rd Level Menu Description
Game Mode User ∙Use Up or Down Button to select and
preview mode effects.
∙Press the OK Button to confirm and
apply your mode type.
FPS
Racing
RTS
RPG
Night Vision OFF ∙This function optimizes background
brightness and is recommended for
FPS games.
Normal
Strong
Strongest
A.I.
Response Time Normal ∙Users can adjust Response Time in
any mode.
∙Response Time will be grayed out
while MPRT Sync is enabled.
Fast
Fastest
15
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
MPRT Sync OFF ∙When MPRT Sync is enabled,
Brightness cannot be enabled and
will be grayed out.
∙HDCR and MPRT Sync cannot be
enabled simultaneously.
∙Response time will be grayed out
while MPRT Sync is enabled.
∙MPRT Sync is available when the
refresh rate is over 85Hz.
ON
Refresh Rate Location Left Top ∙Location is adjustable in OSD Menu.
Press the OK Button to confirm and
apply your Refresh Rate Location.
∙This monitor follows and works at the
Operating System’s preset Screen
Refresh Rate.
Right Top
Left
Bottom
Right
Bottom
Customize
OFF
ON
Alarm Clock Location Left Top ∙After setting the time, press the
Middle Button to activate the timer.
∙Users have to manually restore their
preset Alarm Clock after any AC
power loss and reconnection.
Right Top
Left
Bottom
Right
Bottom
Customize
OFF
15:00 00:01 ~
99:59
30:00
45:00
60:00
Adaptive-Sync OFF ∙Adaptive-Sync prevents screen
tearing.
ON
16 OSD Menus
Professional
1st Level Menu 2nd Level Menu Description
Pro Mode User ∙Use Up or Down Button to select and
preview mode effects.
∙Press the OK Button to confirm and apply
your mode type.
Anti-Blue
Movie
Office
sRGB
Adobe RGB
Display P3
ECO
Low Blue Light OFF ∙Low Blue Light protects your eyes against
blue light. When enabled, Low Blue Light
adjusts the screen color temperature to a
more yellow glow.
∙When Pro Mode is set to Anti-Blue, it is
mandatory to enable Low Blue Light.
ON
HDCR OFF ∙HDCR enhances image quality by
increasing the contrast of images.
∙When HDCR is set to ON, Brightness will be
grayed out.
∙HDCR and MPRT Sync cannot be enabled
simultaneously.
ON
MPRT Sync OFF ∙When MPRT Sync is enabled, Brightness
cannot be enabled and will be grayed out.
∙HDCR and MPRT Sync cannot be enabled
simultaneously.
∙Response time will be grayed out while
MPRT Sync is enabled.
∙MPRT Sync is available when the refresh
rate is over 85Hz.
ON
Image
Enhancement
OFF ∙Image Enhancement enhances image
edges to improve their acutance.
Weak
Medium
Strong
Strongest
17
OSD Menus
Image
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ∙Properly adjust Brightness
according to the surrounding
lighting.
∙Brightness will be grayed out
when MPRT Sync or HDCR are
enabled.
Contrast 0-100 ∙Properly adjust Contrast to relax
your eyes.
Sharpness 0-5 ∙Sharpness improves clarity and
details of images.
Color
Temperature
Cool ∙Use Up or Down Button to select
and preview mode effects.
∙Press the Middle Button to
confirm and apply your mode
type.
∙Users can adjust Color
Temperature in Customization
mode.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Screen Size Auto ∙Users can adjust Screen Size in
any mode, any resolution and any
screen refresh rate.
4:3
16:9
1:1
Input Source
1st Level Menu 2nd Level Menu Description
HDMI1 ∙Users can adjust Input Source in any mode.
HDMI2
DP
Type-C
Auto Scan OFF ∙Users can use the Navi Key to select Input
Source at below status:
•While “Auto Scan” is set to “OFF” with the
monitor at power saving mode;
•While “No Signal” message box is shown
on the monitor.
ON
18 OSD Menus
PIP/PBP
1st Level Menu 2nd/3rd Level Menu Description
OFF ∙PIP (Picture in Picture) allows
users to simultaneously display
multiple video sources on one
screen. One program is displayed
on the full screen at the same
time as one or more other
programs are displayed in inset
windows.
∙PBP (Picture by Picture) is a
similar feature that displays two
input sources side-by-side on the
screen.
∙Display Switch allows users to
switch between primary and
secondary input sources.
∙If there is only one signal input,
the Display Switch and Audio
Switch will be grayed out.
∙Users can adjust the ratio of
window division by switching
mode 1/ 2/ 3.
∙Mode 3 is only for Optix
MPG321UR-QD.
PIP Source HDMI1
HDMI2
DP
Type-C
PIP Size Small
Medium
Large
Location Left Top
Right Top
Left Bottom
Right
Bottom
Customize
Display
Switch
X
Audio
Switch
X
PBP Mode 1 X
Mode 2
Mode 3
Source 1 HDMI1
HDMI2
DP
Type-C
Source 2 HDMI1
HDMI2
DP
Type-C
Display
Switch
X
Audio
Switch
X
19
OSD Menus
Navi Key
1st Level Menu 2nd Level Menu Description
Up / Down / Left
/ Right
OFF ∙All Navi Key items can be adjusted via
OSD Menus.
Brightness
Game Mode
Smart Crosshair
Alarm Clock
Input Source
PIP/PBP Mode
Refresh Rate
Info. On Screen
Night Vision
Optix Scope
KVM
20 OSD Menus
Setting
1st Level Menu 2nd Level Menu Description
Language 繁體中文 ∙Users have to press the OK Button to
confirm and apply the Language setting.
∙Language is an independent setting.
Users’ own language setting will override
the factory default. When users set Reset
to Yes, Language will not be changed.
English
Français
Deutsch
Italiano
Español
한국어
日本語
Русский
Português
简体中文
Bahasa Indonesia
Türkçe
(More languages
coming soon)
Transparency 0~5 ∙Users can adjust Transparency in any
mode.
OSD Time Out 5~30s ∙Users can adjust OSD Time Out in any
mode.
Audio Source Analog ∙Make sure the audio cable is well
connected between monitor and computer
before selecting Analog Source.
Digital
RGB LED OFF ∙Users can adjust RGB LED to ON or OFF.
ON
Power Button OFF ∙When set to OFF, users can press the
power button to turn off the monitor.
Standby ∙When set to Standby, users can press the
power button to turn off the panel and
backlight.
21
OSD Menus
1st Level Menu 2nd Level Menu Description
Info. On Screen OFF ∙The information of the monitor status will
be shown on the right side of the screen.
∙Users can enable or disable the Info. On
Screen.
ON
DP
OverClocking
(for Optix
MPG321QRF-
QD)
OFF ∙To reach maximum resolution of
2560x1440 @175Hz, users have to set DP
OverClocking to ON.
ON
HDMI 2.1
(for Optix
MPG321UR-QD)
4K 120Hz -
Console
∙To reach maximum resolution of
3840x2160 @144Hz, users have to set
HDMI 2.1 to 4K 144Hz - PC.
4K 144Hz - PC
HDMI CEC OFF ∙HDMI CEC (Consumer Electronics Control)
supports Sony PlayStation®, Nintendo®
Switch™, Xbox Series X/S, and various
audio-visual devices that are CEC-capable.
∙If HDMI CEC is set to ON:
•The monitor will automatically power on
when the CEC device is turned on.
•The CEC device will enter power saving
mode when the monitor is turned off.
•When Sony PlayStation®, Nintendo®
Switch™, or Xbox Series X/S is
connected, Game and Pro Mode will be
automatically set to User mode (Default)
and can be adjusted to users’ preferred
modes later.
ON
Reset YES ∙Users can Reset and restore settings to
original OSD Default in any mode.
NO
22 Specifications
Specifications
Model Optix MPG321UR-QD Optix MPG321QRF-QD
Size 32 inch
Curvature Flat
Panel Type IPS Rapid IPS
Resolution 3840 x 2160 (UHD) 2560 x 1440 (QHD)
Aspect Ratio 16:9
Brightness (nits) 400 (typ.)
Contrast Ratio 1000:1
Refresh Rate 144Hz 175Hz (Default: 165Hz)
Response Time 4ms (GTG)/ 1ms (MPRT) 1ms (GTG)/ 1ms (MPRT)
I/O ∙HDMI Port x2
∙DisplayPort x1
∙USB Type-C Port x1
∙USB 2.0 Type-A Port x6
∙USB 2.0 Type-B
Upstream Port x3
∙Headphone Jack x1
∙Microphone Jack x1
∙Combo Audio Jack x1
∙HDMI Port x2
∙DisplayPort x1
∙USB Type-C Port x1
∙USB 3.2 Gen 1 Type-A
Port x3
∙USB 3.2 Gen 1 Type-B
Port x1
∙Headphone Jack x1
∙Microphone Jack x1
∙Combo Audio Jack x1
View Angles 178°(H) , 178°(V)
DCI-P3*/ sRGB 97% / 143% 95% / 144%
Surface Treatment Anti-glare
Display Colors 1.07B (10 bit) 1.07B (8 bit + FRC)
Monitor Power Options 100~240Vac, 50/60Hz, 2A
Power Consumption
(Typical)
Power On < 160W
Standby < 0.5W
Power Off < 0.3W
Adjustment (Tilt) -5° ~ 20°
Adjustment (Height) 0 ~ 100mm
23
Specifications
Model Optix MPG321UR-QD Optix MPG321QRF-QD
Adjustment (Swivel) -30° ~ 30°
Kensington Lock Yes
VESA Mounting ∙Plate Type: 100 x 100 mm
∙Screw Type: M4 x 10 mm
•Thread Diameter: 4 mm
•Thread Pitch: 0.7 mm
•Thread Length: 10 mm
Dimension (W x H x D) 727.1 x 482.2 x 251.8 mm
Weight 10.1 kg (net)
14.1 kg (gross)
10.2 kg (net)
13.9 kg (gross)
Environment Operating ∙Temperature:0℃to40℃
∙Humidity: 20% to 90%, non-condensing
∙Altitude: 0 ~ 5000m
Storage ∙Temperature:-20℃to60℃
∙Humidity: 10% to 90%, non-condensing
* Based on CIE1976 test standards.
24 Preset Display Modes
Preset Display Modes
Standard Resolution Optix MPG321UR-QD
HDMI DP/ Type-C
VGA 640x480 @60Hz V V
@67Hz V V
@72Hz V V
@75Hz V V
SVGA 800x600 @56Hz V V
@60Hz V V
@72Hz V V
@75Hz V V
XGA 1024x768 @60Hz V V
@70Hz V V
@75Hz V V
SXGA 1280x1024 @60Hz V V
@75Hz V V
WXGA+ 1440x900 @60Hz V V
WSXGA+ 1680x1050 @60Hz V V
Full HD 1920x1080 @60Hz V V
QHD 2560x1440 @60Hz V V
@120Hz V V
@144Hz V V
UHD 3840x2160 @60Hz V V
@120Hz V V
@144Hz V * V
Video
Timing
Resolution
480P V V
576P V V
720P V V
720P @120Hz V V
1080P @60Hz V V
1080P @120Hz V V
2160P @30Hz V V
2160P @50Hz V V
2160P @60Hz V V
2160P @120Hz V V
* Users have to set HDMI 2.1 to 4K 144Hz - PC.
25
Preset Display Modes
PBP Resolution Optix MPG321UR-QD
HDMI DP/ Type-C
Mode 1 2560x2160 @60Hz V V
1280x2160 @60Hz V V
Mode 2 1920x2160 @60Hz V V
Mode 3 3840x1080 @60Hz V V
2560x1080 @60Hz V V
Standard Resolution Optix MPG321QRF-QD
HDMI DP/ Type-C
VGA 640x480 @60Hz V V
@67Hz V V
@72Hz V V
@75Hz V V
SVGA 800x600 @56Hz V V
@60Hz V V
@72Hz V V
@75Hz V V
XGA 1024x768 @60Hz V V
@70Hz V V
@75Hz V V
SXGA 1280x1024 @60Hz V V
@75Hz V V
WXGA+ 1440x900 @60Hz V V
WSXGA+ 1680x1050 @60Hz V V
Full HD 1920x1080 @60Hz V V
QHD 2560x1440 @60Hz V V
@120Hz V V
@144Hz V V
@165Hz X V
@175Hz X V *
Video
Timing
Resolution
480P V V
576P V V
720P V V
1080P @60Hz V V
1080P @120Hz V V
2160P @30Hz V V
2160P @50Hz V V
2160P @60Hz V V
* Users have to set DP OverClocking to ON.
26 Preset Display Modes
PBP Resolution Optix MPG321QRF-QD
HDMI DP/ Type-C
Mode 1 1920x1440 @60Hz V V
640x1440 @60Hz V V
Mode 2 1280x1440 @60Hz V V
27
Troubleshooting
Troubleshooting
The power LED is off.
•Press the monitor power button again.
•Check if the monitor power cable is properly connected.
No image.
•Check if the computer graphics card is properly installed.
•Check if the computer and monitor are connected to electrical outlets and are
turned on.
•Check if the monitor signal cable is properly connected.
•The computer may be in Standby mode. Press any key to activate the monitor.
The screen image is not properly sized or centered.
•Refer to Preset Display Modes to set the computer to a setting suitable for the
monitor to display.
No Plug & Play.
•Check if the monitor power cable is properly connected.
•Check if the monitor signal cable is properly connected.
•Check if the computer and graphics card are Plug & Play compatible.
The icons, font or screen are fuzzy, blurry or have color problems.
•Avoid using any video extension cables.
•Adjust brightness and contrast.
•Adjust RGB color or tune color temperature.
•Check if the monitor signal cable is properly connected.
•Check for bent pins on the signal cable connector.
The monitor starts flickering or shows waves.
•Change the refresh rate to match the capabilities of your monitor.
•Update your graphics card drivers.
•Keep the monitor away from electrical devices that may cause electromagnetic
interference (EMI).
28 Safety Instructions
Safety Instructions
∙Read the safety instructions carefully and thoroughly.
∙All cautions and warnings on the device or User Guide should be noted.
∙Refer servicing to qualified personnel only.
Power
∙Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
∙If the power cord comes with a 3-pin plug, do not disable the protective earth pin
from the plug. The device must be connected to an earthed mains socket-outlet.
∙Please confirm the power distribution system in the installation site shall provide
the circuit breaker rated 120/240V, 20A (maximum).
∙Always disconnect the power cord or switch the wall socket off if the device would be
left unused for a certain time to achieve zero energy consumption.
∙Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
∙If this device comes with an adapter, use only the MSI provided AC adapter approved
for use with this device.
Battery
Please take special precautions if this device comes with a battery.
∙Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer.
∙Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting
of a battery, which can result in an explosion.
∙Avoid leaving a battery in an extremely high temperature or extremely low air
pressure environment that can result in an explosion or the leakage of flammable
liquid or gas.
∙Do not ingest battery. If the coin/button cell battery is swallowed, it can cause
severe internal burns and can lead to death. Keep new and used batteries away from
children.
European Union:
Batteries, battery packs, and accumulators should not be disposed of as
unsorted household waste. Please use the public collection system to
return, recycle, or treat them in compliance with the local regulations.
Taiwan:
廢電池請回收
For better environmental protection, waste batteries should be collected
separately for recycling or special disposal.
29
Safety Instructions
California, USA:
The button cell battery may contain perchlorate material and requires
special handling when recycled or disposed of in California.
For further information please visit: https://dtsc.ca.gov/perchlorate/
Environment
∙To reduce the possibility of heat-related injuries or of overheating the device, do not
place the device on a soft, unsteady surface or obstruct its air ventilators.
∙Use this device only on a hard, flat and steady surface.
∙To prevent the device from tipping over, secure the device to a desk, wall or fixed
object with an anti-tip fastener that helps to properly support the device and keep it
safe in place.
∙To prevent fire or shock hazard, keep this device away from humidity and high
temperature.
∙Do not leave the device in an unconditioned environment with a storage temperature
above60℃orbelow-20℃,whichmaydamagethedevice.
∙Themaximumoperatingtemperatureisaround40℃.
∙When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid into
the opening; that could damage the device or cause electric shock.
∙Always keep strong magnetic or electrical objects away from the device.
∙If any of the following situations arises, get the device checked by service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the device.
•The device has been exposed to moisture.
•The device does not work well or you can not get it working according to the User
Guide.
•The device has dropped and damaged.
•The device has obvious sign of breakage.
30 TÜV Rheinland Certification
TÜV Rheinland Certification
TÜV Rheinland Low Blue Light Certification
Blue light has been shown to cause eye fatigue
and discomfort. MSI now offers monitors with TÜV
Rheinland Low Blue Light certification to ensure
users’ eye comfort and well-being. Please follow
the instructions below to reduce the symptoms from
extended exposure to the screen and blue light.
∙Place the screen 20 – 28 inches (50 – 70 cm) away
from your eyes and a little below eye level.
∙Consciously blinking the eyes every now and then will help to reduce eye strain after
extended screen time.
∙Take breaks for 20 minutes every 2 hours.
∙Look away from the screen and gaze at a distant object for at least 20 seconds
during breaks.
∙Make stretches to relieve body fatigue or pain during breaks.
∙Use the Reader/Anti-Blue mode or turn on the optional Low Blue Light function.
TÜV Rheinland Flicker Free Certification
∙TÜV Rheinland has tested this product to
ascertain whether the display produces visible
and invisible flicker for the human eye and
therefore strains the eyes of users.
∙TÜV Rheinland has defined a catalogue of tests,
which sets out minimum standards at various
frequency ranges. The test catalogue is based on
internationally applicable standards or standards common within the industry and
exceeds these requirements.
∙The product has been tested in the laboratory according to these criteria.
∙The keyword “Flicker Free” confirms that the device has no visible and invisible
flicker defined in this standard within the range of 0 - 3000 Hz under various
brightness settings.
∙The display will not support Flicker Free when Anti Motion Blur/MPRT is enabled.
(The availability of Anti Motion Blur/MPRT varies by products.)
31
Regulatory Notices
Regulatory Notices
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage
Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive
(2011/65/EU). This product has been tested and found to comply with the harmonized
standards for Information Technology Equipment published under Directives of Official
Journal of the European Union.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below:
∙Reorient or relocate the receiving antenna.
∙Increase the separation between the equipment and receiver.
∙Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
∙Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA
(626) 913-0828
www.msi.com
32 Regulatory Notices
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2012/19/EU, products of “electrical and
electronic equipment” cannot be discarded as municipal waste anymore
and manufacturers of covered electronic equipment will be obligated to
take back such products at the end of their useful life.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
https://storage-asset.msi.com/html/popup/csr/evmtprtt_pcm.html
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates
that manufacturers provide material declarations for certain categories of electronic
products offered for sale after July 1, 2006.
https://storage-asset.msi.com/html/popup/csr/cemm_jp.html
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011”
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey.
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved
bytheResolutionofCabinetofMinistryofUkraineasofDecember3,2008№1057,
in terms of restrictions for the use of certain dangerous substances in electrical and
electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of
hazardous substances in electronic and electric products.
33
Regulatory Notices
Green Product Features
∙Reduced energy consumption during use and stand-by
∙Limited use of substances harmful to the environment and health
∙Easily dismantled and recycled
∙Reduced use of natural resources by encouraging recycling
∙Extended product lifetime through easy upgrades
∙Reduced solid waste production through take-back policy
Environmental Policy
∙The product has been designed to enable proper reuse of parts and
recycling and should not be thrown away at its end of life.
∙Users should contact the local authorized point of collection for
recycling and disposing of their end-of-life products.
∙Visit the MSI website and locate a nearby distributor for further
recycling information.
∙Users may also reach us at gpcontdev@msi.com for information regarding proper
disposal, take-back, recycling, and disassembly of MSI products.
Warning!
Overuse of screens is likely to affect eyesight.
Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged 2
years and over, screen time should be limited to less than one hour per day.
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is
a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names
mentioned may be trademarks of their respective owners. No warranty as to accuracy
or completeness is expressed or implied. MSI reserves the right to make changes to
this document without prior notice.
Technical Support
If a problem arises with your product and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor. Alternatively,
please visit https://www.msi.com/support/ for further guidance.