Table of Contents
MSI PRO MP271 User Manual
Displayed below is the user manual for PRO MP271 by MSI which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
PRO Series
LCD Monitor
PRO MP242 (3PA1)
PRO MP242V (3PA1)
PRO MP242P (3PA1)
PRO MP271 (3PA2)
PRO MP271P (3PA2)
PRO MP271Q (3PA3)
PRO MP271QP (3PA3)
2Contents
Contents
Getting Started .............................................................................................................. 3
Package Contents ................................................................................................... 3
Installing the Monitor Stand ................................................................................... 4
Adjusting the Monitor ............................................................................................. 6
Monitor Overview .................................................................................................... 8
Connecting the Monitor to PC .............................................................................. 10
OSD Setup ................................................................................................................... 11
OSD Keys .............................................................................................................. 11
OSD Menus.................................................................................................................. 12
Luminance ............................................................................................................ 12
Image Setup (for D-Sub VGA & HDMI) ................................................................. 13
Color Temp. .......................................................................................................... 14
OSD Setup ............................................................................................................. 15
Extra ...................................................................................................................... 15
Specifications .............................................................................................................. 16
Preset Display Modes ................................................................................................ 20
Troubleshooting.......................................................................................................... 22
Safety Instructions ...................................................................................................... 23
TÜV Rheinland Certification....................................................................................... 24
ENERGY STAR Certification ....................................................................................... 24
Regulatory Notices ..................................................................................................... 25
Revision
V1.0, 2021/01
3
Getting Started
Getting Started
This chapter provides you with the information on hardware setup procedures. While
connecting devices, be careful in holding the devices and use a grounded wrist strap
to avoid static electricity.
Package Contents
Monitor
PRO MP242V PRO MP242 /
PRO MP242P /
PRO MP271 /
PRO MP271P
PRO MP271Q /
PRO MP271QP
Documentation
Quick Start Guide
Registration Card
Warranty Card
Accessories
∙Stand (PRO MP242 / PRO MP242V / PRO MP271 / PRO
MP271Q)
∙Stand with Screw(s) (PRO MP242P / PRO MP271P / PRO
MP271QP)
Stand Base Stand Base with Screw(s)
Power Cord
Cables HDMI Cable (Optional)
⚠
Important
∙
Contact your place of purchase or local distributor if any of the items is damaged or
missing.
∙
Package contents may vary by country.
4Getting Started
Installing the Monitor Stand
⚠
Important
∙
Place the monitor on a soft, protected surface to avoid scratching the display panel.
∙
Do not use any sharp objects on the panel.
PRO MP242 / PRO MP271 / PRO MP271Q
1. Leave the monitor in its protective foam packaging. Align the stand to the monitor
groove. Push the stand towards the monitor groove until it locks in place.
2. Connect the base to the stand and tighten the base screw to secure the base.
3. Make sure the stand assembly is properly installed before setting the monitor
upright.
2
1
PRO MP242V
1. Leave the monitor in its protective foam packaging. Align the stand to the monitor
groove. Push the stand towards the monitor groove until it locks in place.
2. Connect and push the base towards the stand until it locks in place.
3. Make sure the stand assembly is properly installed before setting the monitor
upright.
2
1
5
Getting Started
PRO MP242P / PRO MP271P / PRO MP271QP
1. Leave the monitor in its protective foam packaging. Align the stand bracket to the
monitor groove.
2. Tighten the stand bracket with screws.
3. Connect the base to the stand and tighten the base screws to secure the base.
4. Make sure the stand assembly is properly installed before setting the monitor
upright.
2
3
1
⚠
Important
The groove for installing the stand bracket can also be used for wall mount. Please
contact your dealer for proper wall mount kit.
6Getting Started
Adjusting the Monitor
This monitor is designed to maximize your viewing comfort with its adjustment
capabilities.
⚠
Important
∙
Avoid touching the display panel when adjusting the monitor.
∙
Please slightly tilt the monitor backwards before pivoting it.
PRO MP242 / PRO MP271 / PRO MP271Q
-5 O23O
PRO MP242V
-3 O21O
7
Getting Started
PRO MP242P / PRO MP271P / PRO MP271QP
-8 O20O
30
O
30
O
120mm
90O90O
8Getting Started
Monitor Overview
VGA
PRO MP242 / PRO MP242V / PRO MP242P /
PRO MP271 / PRO MP271P
PRO MP271Q / PRO MP271QP
1
3
5
4 6 98
2
5
4 5 97
9
Getting Started
1OSD Keys
2Power Button
3Kensington Lock
4Power Jack
5HDMI Port
6D-Sub VGA Port
7DisplayPort
8Line-In Audio Jack
9Headphone Jack
10 Getting Started
Connecting the Monitor to PC
1. Turn off your computer.
2. Connect the video cable from the monitor to your computer.
3. Connect the power cord to the monitor power jack. (Figure A)
4. Plug the power cord into the electrical outlet. (Figure B)
5. Turn on the monitor. (Figure C)
6. Power on the computer and the monitor will auto detect the signal source.
B
C
A
11
OSD Setup
OSD Setup
This chapter provides you with essential information on OSD Setup.
⚠
Important
All information is subject to change without prior notice.
OSD Keys
The monitor comes with a set of OSD Keys that help to control the On-Screen Display
(OSD) menu.
2
3
4
1
OSD Key Hot Key (When OSD is OFF) OSD Setup (When OSD is ON)
1AUTO /
SOURCE /
EXIT
∙Selecting the video input from
external sources
∙Activating the Auto
Adjustment function to
optimize the horizontal
position, vertical position,
clock and focus
∙Returning to the previous
menu
∙Exiting from the OSD Main
Menu
2VOLUME / + ∙Activating the Volume control ∙Navigating through function
menus and items
∙Adjusting function values
3ECO / - ∙Activating the ECO function
4MENU /
ENTER
∙Activating the OSD Main Menu
∙To lock/unlock the OSD, press
and hold the MENU button
while the monitor is off and
then press the power button
to turn the monitor on.
∙Confirming the selection
12 OSD Menus
OSD Menus
Luminance
1st Level Menu 2nd Level Menu Description
Contrast 0-100 ∙Adjusting display contrast. This function
is available in Standard mode.
Brightness 0-100 ∙Adjusting display brightness. This
function is available in Standard mode.
Eco Mode Standard ∙Standard Mode
Text ∙Text Mode
Internet ∙Internet Mode
Game ∙Game Mode
Movie ∙Movie Mode
Sports ∙Sports Mode
DCR ON ∙DCR enhances image quality by
increasing the contrast of images.
∙When DCR is enabled, Contrast,
Brightness and Eco Mode cannot be
adjusted and will be grayed out.
∙When DCR is enabled, Color Temp. will
be set to Warm.
OFF
13
OSD Menus
1st Level Menu 2nd Level Menu Description
Overdrive
(for PRO MP242
/ PRO MP242V
/ PRO MP242P
/ PRO MP271 /
PRO MP271P)
Normal ∙Deactivating the response time
overdrive function
Fast ∙Setting to Fast will shorten the
response time and help improve
blurred images when playing fast
games.
Fastest ∙Setting to Fastest will reach the
shortest response time and help
improve blurred images when playing
very fast games.
∙Overshooting may occur when
Overdrive is set to Fastest.
Image Setup (for D-Sub VGA & HDMI)
PRO MP242 / PRO MP242V / PRO MP242P / PRO MP271 / PRO
MP271P
1st Level Menu 2nd Level Menu Description
Clock 0-100 ∙Adjusting the clock to reduce Vertical-Line
noise
Phase 0-100 ∙Adjusting the phase to reduce Horizontal-
Line noise
H. Position 0-100 ∙Adjusting the horizontal position of the
image
V. Position 0-100 ∙Adjusting the vertical position of the image
Image Ratio Wide ∙Selecting the Image Aspect Ratio
4:3
14 OSD Menus
PRO MP271Q / PRO MP271QP
1st Level Menu 2nd Level Menu Description
Image Ratio Wide ∙Selecting the Image Aspect Ratio
4:3
Overdrive Normal ∙Deactivating the response time overdrive
function
Fast ∙Setting to Fast will shorten the response
time and help improve blurred images
when playing fast games.
Fastest ∙Setting to Fastest will reach the shortest
response time and help improve blurred
images when playing very fast games.
∙Overshooting may occur when Overdrive is
set to Fastest.
Color Temp.
1st Level Menu 2nd Level Menu Description
Warm (6500K) ∙Setting Warm Color Temperature to
default
Normal (7300K) ∙Setting Normal Color Temperature to
default
Cool (9300K) ∙Setting Cool Color Temperature to default
User R (0-100) ∙Adjusting the Red Gain
G (0-100) ∙Adjusting the Green Gain
B (0-100) ∙Adjusting the Blue Gain
sRGB ∙Setting sRGB Color Temperature to
default
Low Blue Light (Optional) ∙Low Blue Light protects your eyes against
blue light. When enabled, Low Blue Light
adjusts the screen color temperature to a
more yellow glow.
15
OSD Menus
OSD Setup
1st Level Menu 2nd Level Menu Description
H. Position 0-100 ∙Adjusting the horizontal position of OSD
V. Position 0-100 ∙Adjusting the vertical position of OSD
Timeout 5-100 ∙Adjusting the OSD timeout
Language English ∙Selecting the OSD language
Español
Français
Português
Русский
简体中文
繁體中文
한국어
(More languages
coming soon)
Extra
1st Level Menu 2nd Level Menu Description
Input Select
(for PRO MP242
/ PRO MP242V /
PRO MP242P /
PRO MP271 / PRO
MP271P)
Auto ∙Selecting the video input source
D-SUB
HDMI
Input Select
(for PRO MP271Q
/ PRO MP271QP)
Auto
HDMI1
HDMI2
DisplayPort
DDC/CI ON ∙Turning on/off the DDC/CI support
OFF
Reset YES ∙Resetting and restoring settings to
original OSD defaults
NO
Information ∙Showing the information of the main
image source
16 Specifications
Specifications
PRO MP242 / PRO MP242V / PRO MP242P
Model PRO MP242 PRO MP242V PRO MP242P
Size 23.8 inch
Panel Type IPS
Resolution 1920 x 1080 @75Hz
Aspect Ratio 16:9
Brightness (nits) 250 cd/m2 (TYP)
Contrast Ratio 1000:1
Refresh Rate 75 Hz
Response Time 5 ms
Input Interface ∙HDMI Port x1
∙D-Sub VGA Port x1
View Angles 178°(H) , 178°(V)
sRGB 99.1%
Surface Treatment Anti-glare
Display Colors 16.7 Million
Speaker 2 x 2W
Power Type Internal Power
Power Consumption
(Typical)
Power On < 27W
Standby < 0.5W
Power Off < 0.5W
System Rating 100~240Vac, 50/60Hz, 1.5A
Adjustment (Tilt) -5° ~ 23° -3° ~ 21° -8°~ 20°
Adjustment (Swivel) -30° ~ 30°
Adjustment (Pivot) -90° ~ 90°
Adjustment (Height) 0 ~ 120 mm
Kensington Lock Yes
17
Specifications
Model PRO MP242 PRO MP242V PRO MP242P
VESA Mounting
∙Plate Type: 100 x 100 mm
∙Screw Type: M4 x 10 mm
•Thread Diameter: 4 mm
•Thread Pitch: 0.7 mm
•Thread Length: 10 mm
Dimension (W x H x D) 539.5 x 405.9 x
219.7mm
539.5 x 402.7 x
205.7mm
539.5 x 385.7 x
228.9 mm
Weight 3.3Kg (Net),
4.9Kg (Gross)
3.07Kg (Net),
4.7Kg (Gross)
4.49Kg (Net),
6.6Kg (Gross)
Environment
Operating ∙Temperature:0℃to40℃
∙Humidity: 10% to 85%, non-condensing
∙Altitude: 0 ~ 5000m
Storage ∙Temperature:-20℃to60℃
∙Humidity: 10% to 90%, non-condensing
18 Specifications
PRO MP271 / PRO MP271P / PRO MP271Q / PRO MP271QP
Model PRO MP271 PRO MP271P PRO MP271Q PRO MP271QP
Size 27 inch
Panel Type IPS
Resolution 1920 x 1080 @60Hz 2560 x 1440 @60Hz
Aspect Ratio 16:9
Brightness (nits) 250 cd/m2 (TYP) 300 cd/m2 (TYP)
Contrast Ratio 1000:1
Refresh Rate 60 Hz
Response Time 5 ms
Input Interface ∙HDMI Port x1
∙D-Sub VGA Port x1
∙HDMI Port x2
∙DisplayPort x1
View Angles 178°(H) , 178°(V)
sRGB 93.1% 126.6%
Surface Treatment Anti-glare
Display Colors 16.7 Million
Speaker 2 x 2W
Power Type Internal Power
Power Consumption
(Typical)
Power On < 23W
Standby < 0.5W
Power Off < 0.5W
Power On < 35W
Standby < 0.5W
Power Off < 0.5W
System Rating 100~240Vac, 50/60Hz, 1.5A
Adjustment (Tilt) -5° ~ 23° -8°~ 20° -5° ~ 23° -8°~ 20°
Adjustment (Swivel) -30° ~ 30° -30° ~ 30°
Adjustment (Pivot) -90° ~ 90° -90° ~ 90°
Adjustment (Height) 0 ~ 120 mm 0 ~ 120 mm
Kensington Lock Yes
19
Specifications
Model PRO MP271 PRO MP271P PRO MP271Q PRO MP271QP
VESA Mounting
∙Plate Type: 100 x 100 mm
∙Screw Type: M4 x 10 mm
•Thread Diameter: 4 mm
•Thread Pitch: 0.7 mm
•Thread Length: 10 mm
Dimension (W x H x D)
612.6 x
456.8 x
219.7 mm
612.6 x 405.4
x 228.9 mm
612.6 x 456.8
x 219.7 mm
612.6 x 405.4 x
228.9 mm
Weight
4.2Kg (Net),
6.2Kg
(Gross)
5.3Kg (Net),
7.3Kg (Gross)
4.8Kg (Net),
7.1Kg (Gross)
6.0Kg (Net),
8.2Kg (Gross)
Environment
Operating ∙Temperature:0℃to40℃
∙Humidity: 10% to 85%, non-condensing
∙Altitude: 0 ~ 5000m
Storage ∙Temperature:-20℃to60℃
∙Humidity: 10% to 90%, non-condensing
20 Preset Display Modes
Preset Display Modes
PRO MP242 / PRO MP242V / PRO MP242P / PRO MP271 / PRO
MP271P
Standard Resolution HDMI VGA
VGA 640x480 @60Hz V V
@67Hz V V
@72Hz V V
@75Hz V V
Dos-Mode 720x400 @70Hz V V
SVGA 800x600 @56Hz V V
@60Hz V V
@72Hz V V
@75Hz V V
832×624 @75Hz V V
XGA 1024x768 @60Hz V V
@70Hz V V
@75Hz V V
SXGA 1280×720 @60Hz V V
1280×960 @60Hz V V
1280x1024 @60Hz V V
@75Hz V V
WXGA+ 1440x900 @60Hz V V
WSXGA+ 1680x1050 @60Hz V V
Full HD 1920x1080 @60Hz V V
@75Hz V X
Video
Timing
Resolution
480P V X
576P V X
720P V X
1080P V X
21
Preset Display Modes
PRO MP271Q / PRO MP271QP
Standard Resolution HDMI DP
VGA 640x480 @60Hz V V
@67Hz V V
@72Hz V V
@75Hz V V
Dos-Mode 720x400 @70Hz V V
SVGA 800x600 @56Hz V V
@60Hz V V
@72Hz V V
@75Hz V V
XGA 1024x768 @60Hz V V
@70Hz V V
@75Hz V V
SXGA 1152×864 @75Hz V V
1280×720 @60Hz V V
1280×960 @60Hz V V
1280x1024 @60Hz V V
@75Hz V V
WXGA+ 1440x900 @60Hz V V
WSXGA+ 1680x1050 @60Hz V V
QHD 2560×1440 @60Hz V V
Video
Timing
Resolution
480P V V
576P V V
720P V V
1080P V V
22 Troubleshooting
Troubleshooting
The power LED is off.
•Press the monitor power button again.
•Check if the monitor power cable is properly connected.
No image.
•Check if the computer graphics card is properly installed.
•Check if the computer and monitor are connected to electrical outlets and are
turned on.
•Check if the monitor signal cable is properly connected.
•The computer may be in Standby mode. Press any key to activate the monitor.
The screen image is not properly sized or centered.
•Refer to Preset Display Modes to set the computer to a setting suitable for the
monitor to display.
No Plug & Play.
•Check if the monitor power cable is properly connected.
•Check if the monitor signal cable is properly connected.
•Check if the computer and graphics card are Plug & Play compatible.
The icons, font or screen are fuzzy, blurry or have color problems.
•Avoid using any video extension cables.
•Adjust brightness and contrast.
•Adjust RGB color or tune color temperature.
•Check if the monitor signal cable is properly connected.
•Check for bent pins on the signal cable connector.
The monitor starts flickering or shows waves.
•Change the refresh rate to match the capabilities of your monitor.
•Update your graphics card drivers.
•Keep the monitor away from electrical devices that may cause electromagnetic
interference (EMI).
23
Safety Instructions
Safety Instructions
∙Read the safety instructions carefully and thoroughly.
∙All cautions and warnings on the device or user’s manual should be noted.
∙Refer servicing to qualified personnel only.
∙Keep the User’s Guide that comes with the package for future reference.
∙To prevent fire or shock hazard, keep this device away from humidity and high
temperature.
∙Lay this device on a reliable flat surface before setting it up.
∙Make sure that the power voltage is within its safety range and has been adjusted
properly to the value of 100~240V before connecting the device to the power outlet.
Do not disable the protective earth pin from the plug. The device must be connected
to an earthed mains socket-outlet.
∙Always disconnect the power cord or switch the wall socket off if the device would be
left unused for a certain time to achieve zero energy consumption.
∙The ventilator on the device is used for air convection and to prevent the device from
overheating. Do not cover the ventilator.
∙Do not leave the device in an unconditioned environment with a storage temperature
above60℃orbelow-20℃,whichmaydamagethedevice.
∙NOTE:Themaximumoperatingtemperatureisaround40℃.
∙When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid into
the opening; that could damage the device or cause electric shock.
∙Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
∙Always keep strong magnetic or electrical objects away from the device.
∙If any of the following situations arises, get the device checked by service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the device.
•The device has been exposed to moisture.
•The device does not work well or you can not get it work according to user’s
manual.
•The device has dropped and damaged.
•The device has obvious sign of breakage.
∙To prevent the monitor from tipping over, secure the monitor to a desk, wall or fixed
object with a anti-tip fastener that helps to properly support the monitor and keep it
safe in place.
⚠
Important
Please confirm the power distribution system in the installation site shall provide the
circuit breaker rated 120/240V, 20A (maximum).
24 TÜV Rheinland Certification
TÜV Rheinland Certification
TÜV Rheinland Low Blue Light Certification
Blue light has been shown to cause eye fatigue
and discomfort. MSI now offers monitors with TÜV
Rheinland Low Blue Light certification to ensure
users’ eye comfort and well-being. Please follow
the instructions below to reduce the symptoms from
extended exposure to the screen and blue light.
∙Place the screen 20 – 28 inches (50 – 70 cm) away
from your eyes and a little below eye level.
∙Consciously blinking the eyes every now and then will help to reduce eye strain after
extended screen time.
∙Take breaks for 20 minutes every 2 hours.
∙Look away from the screen and gaze at a distant object for at least 20 seconds
during breaks.
∙Make stretches to relieve body fatigue or pain during breaks.
∙Use the Reader/Anti-Blue mode or turn on the optional Low Blue Light function.
TÜV Rheinland Flicker Free Certification
∙TÜV Rheinland has tested this product to ascertain
whether the display produces visible and invisible
flicker for the human eye and therefore strains the
eyes of users.
∙TÜV Rheinland has defined a catalogue of tests,
which sets out minimum standards at various
frequency ranges. The test catalogue is based on
internationally applicable standards or standards common within the industry and
exceeds these requirements.
∙The product has been tested in the laboratory according to these criteria.
∙The keyword “Flicker Free” confirms that the device has no visible and invisible
flicker defined in this standard within the range of 0 - 3000 Hz under various
brightness settings.
∙The display will not support Flicker Free when Anti Motion Blur/MPRT is enabled.
(The availability of Anti Motion Blur/MPRT varies by products.)
ENERGY STAR Certification
ENERGY STAR is a program run by the U.S. Environmental
Protection Agency (EPA) and U.S. Department of Energy (DOE) to
promote energy efficiency. This product qualifies for ENERGY STAR
in the “factory default” settings through which power savings will be
achieved. Changing the factory default picture settings or enabling
other features will increase power consumption, which could exceed
the limits necessary to qualify for ENERGY STAR rating.
For more information on ENERGY STAR, refer to https://www.energystar.gov/.
25
Regulatory Notices
Regulatory Notices
CE Conformity
This device complies with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States
relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage
Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive
(2011/65/EU). This product has been tested and found to comply with the harmonized
standards for Information Technology Equipment published under Directives of Official
Journal of the European Union.
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the measures listed below:
∙Reorient or relocate the receiving antenna.
∙Increase the separation between the equipment and receiver.
∙Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
∙Consult the dealer or an experienced radio/television technician for help.
Notice 1
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
MSI Computer Corp.
901 Canada Court, City of Industry, CA 91748, USA
(626) 913-0828
www.msi.com
26 Regulatory Notices
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2012/19/EU, products of “electrical and
electronic equipment” cannot be discarded as municipal waste anymore
and manufacturers of covered electronic equipment will be obligated to
take back such products at the end of their useful life.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
https://storage-asset.msi.com/html/popup/csr/evmtprtt_pcm.html
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates
that manufacturers provide material declarations for certain categories of electronic
products offered for sale after July 1, 2006.
https://storage-asset.msi.com/html/popup/csr/cemm_jp.html
India RoHS
This product complies with the “India E-waste (Management and Handling) Rule 2011”
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Turkey EEE Regulation
Conforms to the EEE Regulations of the Republic Of Turkey.
Ukraine Restriction of Hazardous Substances
The equipment complies with requirements of the Technical Regulation, approved
bytheResolutionofCabinetofMinistryofUkraineasofDecember3,2008№1057,
in terms of restrictions for the use of certain dangerous substances in electrical and
electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of
hazardous substances in electronic and electric products.
27
Regulatory Notices
Green Product Features
∙Reduced energy consumption during use and stand-by
∙Limited use of substances harmful to the environment and health
∙Easily dismantled and recycled
∙Reduced use of natural resources by encouraging recycling
∙Extended product lifetime through easy upgrades
∙Reduced solid waste production through take-back policy
Environmental Policy
∙The product has been designed to enable proper reuse of parts and
recycling and should not be thrown away at its end of life.
∙Users should contact the local authorized point of collection for
recycling and disposing of their end-of-life products.
∙Visit the MSI website and locate a nearby distributor for further
recycling information.
∙Users may also reach us at gpcontdev@msi.com for information regarding proper
disposal, take-back, recycling, and disassembly of MSI products.
Warning!
Overuse of screens is likely to affect eyesight.
Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged 2
years and over, screen time should be limited to less than one hour per day.
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is
a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names
mentioned may be trademarks of their respective owners. No warranty as to accuracy
or completeness is expressed or implied. MSI reserves the right to make changes to
this document without prior notice.
Technical Support
If a problem arises with your product and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor. Alternatively,
please visit https://www.msi.com/support/ for further guidance.