Table of Contents
MSI VR7RC-035 User Manual
Displayed below is the user manual for VR7RC-035 by MSI which is a product in the PCs/Workstations category. This manual has pages.
Related Manuals
Codex Series
Personal Computer
Codex B913
G52-B9131X8
Preface
iiiii
Contents
Copyright Notice ������������������������������������������������������������������������������������������������������iii
Trademarks �������������������������������������������������������������������������������������������������������������iii
Revision ������������������������������������������������������������������������������������������������������������������iii
Upgrade and Warranty ��������������������������������������������������������������������������������������������iv
Acquisition of Replaceable Parts ����������������������������������������������������������������������������iv
Technical Support ���������������������������������������������������������������������������������������������������iv
Green Product Features ������������������������������������������������������������������������������������������iv
Environmental Policy ����������������������������������������������������������������������������������������������� v
Chemical Substances Information �������������������������������������������������������������������������� v
Battery Information �������������������������������������������������������������������������������������������������� v
Safety Instructions ���������������������������������������������������������������������������������������������������vi
CE Conformity ������������������������������������������������������������������������������������������������������� viii
FCC-B Radio Frequency Interference Statement ������������������������������������������������� viii
WEEE Statement �������������������������������������������������������������������������������������������������� viii
RoHS Statement �����������������������������������������������������������������������������������������������������ix
1. Overview ............................................................ 1-1
Packing Contents ������������������������������������������������������������������������������������������������� 1-2
System Overview ������������������������������������������������������������������������������������������������� 1-3
Component Replacement & Upgrade ���������������������������������������������������������������� 1-23
2. Getting Started ................................................... 2-1
Safety & Comfort Tips ������������������������������������������������������������������������������������������ 2-2
Hardware Setup ��������������������������������������������������������������������������������������������������� 2-3
3. System Operations ............................................. 3-1
Power Management ��������������������������������������������������������������������������������������������� 3-2
Network Connection (Windows 10) ���������������������������������������������������������������������� 3-4
System Recovery (Windows 10) �������������������������������������������������������������������������� 3-7
Preface
iiiii
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL� We take every care in the preparation of this document, but no
guarantee is given as to the correctness of its contents� Our products are under continual
improvement and we reserve the right to make changes without notice�
Trademarks
All trademarks are the properties of their respective owners�
Revision
Revision Date
V1�2 2017/09
Preface
viv
Upgrade and Warranty
Please note that certain components preinstalled in the product may be upgradable
or replaceable by user’s request� For any further information about the product users
purchased, please contact the local dealer� Do not attempt to upgrade or replace
any component of the product if you are not an authorized dealer or service center,
since it may cause the warranty void� It is strongly recommended that you contact the
authorized dealer or service center for any upgrade or replace service�
Acquisition of Replaceable Parts
Please be noticed that the acquisition of replaceable parts (or compatible ones) of
the product users purchased in certain countries or territories may be fullled by the
manufacturer within 5 years at most since the product has been discontinued, depending
on the ocial regulations declared at the time. Please contact the manufacturer via
http://www�msi�com/support/ for the detailed information about the acquisition of spare
parts�
Technical Support
If a problem arises with your system and no solution can be obtained from the user’s
manual, please contact your place of purchase or local distributor� Alternatively, please
try the following help resources for further guidance� Visit the MSI website for technical
guide, BIOS updates, driver updates and other information via http://www�msi�com/
support/
Green Product Features
◙Reduced energy consumption during use and stand-by
◙Limited use of substances harmful to the environment and health
◙Easily dismantled and recycled
◙Reduced use of natural resources by encouraging recycling
◙Extended product lifetime through easy upgrades
◙Reduced solid waste production through take-back policy
Preface
viv
Environmental Policy
◙The product has been designed to enable proper reuse of parts
and recycling and should not be thrown away at its end of life�
◙Users should contact the local authorized point of collection for
recycling and disposing of their end-of-life products�
◙Visit the MSI website and locate a nearby distributor for further recycling
information�
◙Users may also reach us at gpcontdev@msi�com for information regarding
proper Disposal, Take-back, Recycling, and Disassembly of MSI products�
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation
(Regulation EC No� 1907/2006 of the European Parliament and the Council), MSI
provides the information of chemical substances in products at:
http://www�msi�com/html/popup/csr/evmtprtt_pcm�html
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be disposed
of as unsorted household waste� Please use the public collection
system to return, recycle, or treat them in compliance with the
local regulations�
Taiwan:
For better environmental protection, waste batteries should be
collected separately for recycling or special disposal�
California, USA:
The button cell battery may contain perchlorate material and requires special handling
when recycled or disposed of in California�
For further information please visit:
http://www�dtsc�ca�gov/hazardouswaste/perchlorate/
Danger of explosion if battery is incorrectly replaced� Replace only with the same or
equivalent type recommended by the manufacturer�
Preface
viivi
Safety Instructions
◙Read the safety instructions carefully and thoroughly�
◙All cautions and warnings on the equipment or user’s manual should be
noted�
Keep the User’s Guide that comes with the package for future reference�
Keep this equipment away from humidity and high temperature�
Lay this equipment on a reliable at surface before setting it up.
◙Make sure that the power voltage is within its safety range and has
been adjusted properly to the value of 100~240V before connecting the
equipment to the power outlet� Do not disable the protective earth pin from
the plug� The equipment must be connected to an earthed mains socket-
outlet�
◙Always unplug the AC power cord before installing any add-on card or
module to the equipment�
◙Always disconnect the AC power cord or switch the wall socket o if the
equipment would be left unused for a certain time to achieve zero energy
consumption�
◙Power Supply AC 100-240V, 47-63Hz, 15-7�5A (Codex X3 B913/ Codex
XE B913)
◙Power Supply AC 100-240V, 47-63Hz, 10-5A (Codex X3 B913/ Codex 3
B913/ Codex XE B913)
◙Power Supply AC 100-240V, 47-63Hz, 6-3A (Codex 3 B913)
◙Power Supply AC 100-240V, 50-60Hz, 8-4A (Codex X3 B913/ Codex 3
B913)
◙Power Supply AC 100-240V, 50-60Hz, 5-2�5A (Codex 3 B913)
The ventilator on the enclosure is used for air convection and to prevent the
equipment from overheating� Do not cover the ventilator�
Preface
viivi
Do not leave the equipment in an unconditioned environment with a storage
temperature above 60OC (140OF) or below 0OC (32OF), which may damage the
equipment�
NOTE: The maximum operating temperature is around 40OC�
Never pour any liquid into the opening that could damage or cause electrical
shock�
Place the power cord in a way that people are unlikely to step on it� Do not
place anything on the power cord�
◙When installing the coaxial cable to the TV Tuner, it is necessary to ensure
that the metal shield is reliably connected to protective earthing system of
the building�
◙Cable distribution system should be grounded (earthed) in accordance with
ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section
820�93, Grounding of Outer Conductive Shield of a Coaxial Cable�
Always keep the strong magnetic or electrical objects away from the
equipment�
If any of the following situations arises, get the equipment checked by service
personnel:
◙The power cord or plug is damaged�
◙Liquid has penetrated into the equipment�
◙The equipment has been exposed to moisture�
◙The equipment does not work well or you can not get it work according to
user’s manual�
◙The equipment has dropped and damaged�
◙The equipment has obvious sign of breakage�
1� The optical storage devices are classied as CLASS 1 LASER PRODUCT.
Use of controls or adjustments or performance of procedures other than
those specied is prohibited.
2� Do not touch the lens inside the drive�
Preface
ixviii
CE Conformity
Hereby, Micro-Star International CO�, LTD declares that this device is
in compliance with the essential safety requirements and other relevant
provisions set out in the European Directive�
FCC-B Radio Frequency Interference
Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules�
These limits are designed to provide reasonable protection against
harmful interference in a residential installation� This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications� However,
there is no guarantee that interference will not occur in a particular installation� If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the measures listed below:
￭Reorient or relocate the receiving antenna�
￭Increase the separation between the equipment and receiver�
￭Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected�
￭Consult the dealer or an experienced radio/television technician for help�
Notice 1
The changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment�
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to comply
with the emission limits�
This device complies with Part 15 of the FCC Rules� Operation is subject to the following
two conditions:
1� this device may not cause harmful interference, and
2� this device must accept any interference received, including interference that may
cause undesired operation�
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2002/96/EC, which takes eect on August
13, 2005, products of “electrical and electronic equipment” cannot be
discarded as municipal waste anymore and manufacturers of covered
electronic equipment will be obligated to take back such products at the end of their
useful life�
Preface
ixviii
RoHS Statement
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, dened by specication JIS C 0950, mandates
that manufacturers provide material declarations for certain categories of electronic
products oered for sale after July 1, 2006.
http://www�msi�com/html/popup/csr/cemm_jp�html
http://tw�msi�com/html/popup/csr_tw/cemm_jp�html
India RoHS
This product complies with the "India E-waste (Management and Handling) Rule 2011"
and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers in concentrations exceeding 0�1 weight % and 0�01
weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule�
Turkey EEE regulation
Conforms to the EEE Regulations of the Republic Of Turkey
Ukraine restriction of hazardous substances
The equipment complies with requirements of the Technical Regulation, approved by
the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057,
in terms of restrictions for the use of certain dangerous substances in electrical and
electronic equipment�
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous
substances in electronic and electric products�
1
Overview
Congratulations for purchasing the Codex Series Personal Computer System�
This system is your best PC choice� With the fantastic appearance, it can
easily be set anywhere� The feature packed platform also gives you an
exciting PC experience�
Overview
1-31-2
Packing Contents
Codex Series
AC Power Cord
Driver/ Utility Disc
User Manual
* Please contact us immediately if any of the items is damaged or missing�
* The illustrations are for reference only and your packing contents may slightly vary
depending on the model you purchased�
Overview
1-31-2
System Overview
14
18
15
1
6 5 234
7
8
9
11
13
1920
17 16
21
23
22
24
25
10
12
Codex X3 B913 (Z270)
Overview
1-51-4
1Power Button
Press the power button to turn the system on and o.
2USB 3�1 Gen1 Port (Type C)
USB Type C port is allowing for reversible plug orientation�
3USB 3�1 Gen1 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
4Headphone Jack
This connector is provided for headphones or speakers�
5Microphone Jack
This connector is provided for microphones�
6HDMI-Out Port
The High-Denition Multimedia Interface (HDMI) is an all-digital audio/
video interface capable of transmitting uncompressed streams� HDMI
supports all TV format, including standard, enhanced, or high-denition
video, plus multi-channel digital audio on a single cable�
7PS/2® Keyboard / Mouse Port
The PS/2® keyboard / Mouse DIN connector for PS/2® keyboard / Mouse�
8USB 2�0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such as
keyboard, mouse, or other USB-compatible devices�
9DVI-D Port
The DVI-D (Digital Visual Interface-Digital) connector allows you to
connect a LCD monitor� It provides a high-speed digital interconnection
between the computer and its display device� To connect an LCD
monitor, sim-ply plug your monitor cable into the DVI-D connector, and
make sure that the other end of the cable is properly connected to your
monitor (refer to your monitor manual for more information�)
Overview
1-51-4
10 USB 3�1 Gen2 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
11 USB 3�1 Gen2 Port (Type C)
USB Type C port is allowing for reversible plug orientation�
12 USB 3�1 Gen1 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
13 HDMI-Out Port
The High-Denition Multimedia Interface (HDMI) is an all-digital audio/
video interface capable of transmitting uncompressed streams� HDMI
supports all TV format, including standard, enhanced, or high-denition
video, plus multi-channel digital audio on a single cable�
14 LAN Jack
The standard RJ-45 LAN jack is provided for connection to the Local
Area Network (LAN)� You can connect a network cable to it�
Green/ OrangeYellow
LED Color LED State Condition
Left Yellow O LAN link is not established�
On (steady state) LAN link is established�
On (blinking) The computer is communicating with
another computer on the LAN�
Right Green O 10 Mbit/sec data rate is selected�
On 100 Mbit/sec data rate is selected�
Orange On 1000 Mbit/sec data rate is selected�
15 Line-In
Used for connecting external audio outputting devices�
16 Line-Out
Used as a connector for speakers or headphone�
Overview
1-71-6
17 Mic
Used as a connector for a microphone�
18 RS-Out
Rear surround sound line out in 4/ 5�1/ 7�1 channel mode�
19 CS-Out
Center/ subwoofer line out in 5�1/ 7�1 channel mode�
20 SS-Out
Side surround sound line out in 7�1 channel mode�
21 Ventilator
The ventilator on the enclosure is used for air convection and to prevent
the equipment from overheating� Do not cover the ventilator�
22 Power Supply Switch
Switch this switch to
-
can turn on the power supply� Switch it to
0
to cut
o the power circulation.
23 Power Jack
Power supplied through this jack supplies power to your system�
24 LED Button
Press the button to turn on or o the LED.
25 ODD Eject Button
Press the button to eject the optical disc drive�
Important
High-speed devices are recommended for USB 3�1 ports whereas low-speed devices,
such as mouse or keyboard, are suggested to be plugged into the USB 2�0 ports�
Overview
1-71-6
1
6 5 234
21
23
22
24
25
14
18
15
7
8
9
11
13
1920
17
16
10
12
Codex X3 B913 (Z370 SLI PLUS)
Overview
1-91-8
1Power Button
Press the power button to turn the system on and o.
2USB 3�1 Gen1 Port (Type C)
USB Type C port is allowing for reversible plug orientation�
3USB 3�1 Gen1 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
4Headphone Jack
This connector is provided for headphones or speakers�
5Microphone Jack
This connector is provided for microphones�
6HDMI-Out Port
The High-Denition Multimedia Interface (HDMI) is an all-digital audio/
video interface capable of transmitting uncompressed streams� HDMI
supports all TV format, including standard, enhanced, or high-denition
video, plus multi-channel digital audio on a single cable�
7PS/2® Keyboard / Mouse Port
The PS/2® keyboard / Mouse DIN connector for PS/2® keyboard / Mouse�
8USB 2�0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such as
keyboard, mouse, or other USB-compatible devices�
9DVI-D Port
The DVI-D (Digital Visual Interface-Digital) connector allows you to
connect a LCD monitor� It provides a high-speed digital interconnection
between the computer and its display device� To connect an LCD
monitor, sim-ply plug your monitor cable into the DVI-D connector, and
make sure that the other end of the cable is properly connected to your
monitor (refer to your monitor manual for more information�)
Overview
1-91-8
10 USB 3�1 Gen2 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
11 USB 3�1 Gen2 Port (Type C)
USB Type C port is allowing for reversible plug orientation�
12 USB 3�1 Gen1 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
13 HDMI-Out Port
The High-Denition Multimedia Interface (HDMI) is an all-digital audio/
video interface capable of transmitting uncompressed streams� HDMI
supports all TV format, including standard, enhanced, or high-denition
video, plus multi-channel digital audio on a single cable�
14 LAN Jack
The standard RJ-45 LAN jack is provided for connection to the Local
Area Network (LAN)� You can connect a network cable to it�
Green/ OrangeYellow
LED Color LED State Condition
Left Yellow O LAN link is not established�
On (steady state) LAN link is established�
On (blinking) The computer is communicating with
another computer on the LAN�
Right Green O 10 Mbit/sec data rate is selected�
On 100 Mbit/sec data rate is selected�
Orange On 1000 Mbit/sec data rate is selected�
15 CS-Out
Center/ Subwoofer Out in 5�1/ 7�1 channel mode�
16 RS-Out
Rear-Surround Out in 4/ 5�1/ 7�1 channel mode�
Overview
1-111-10
17 S/PDIF-Out
This S/PDIF (Sony & Philips Digital Interconnect Format) connector is
provided for digital audio transmission to external speakers through an
optical ber cable.
18 Line-In
For external CD player, tapeplayer or other audio devices�
SS-Out
Side surround sound line out in 7�1 channel mode�
19 Line-Out
For speakers or headphones�
20 Mic
For microphones�
21 Ventilator
The ventilator on the enclosure is used for air convection and to prevent
the equipment from overheating� Do not cover the ventilator�
22 Power Supply Switch
Switch this switch to
-
can turn on the power supply� Switch it to
0
to cut
o the power circulation.
23 Power Jack
Power supplied through this jack supplies power to your system�
24 LED Button
Press the button to turn on or o the LED.
25 ODD Eject Button
Press the button to eject the optical disc drive�
Important
High-speed devices are recommended for USB 3�1 ports whereas low-speed devices,
such as mouse or keyboard, are suggested to be plugged into the USB 2�0 ports�
Overview
1-111-10
14
18
15
1
6 5 234
7
8
10
11
13
1920
17 16
21
23
22
24
25
12
Codex XE B913 (Z370-A PRO)
9
Overview
1-131-12
1Power Button
Press the power button to turn the system on and o.
2USB 3�1 Gen1 Port (Type C)
USB Type C port is allowing for reversible plug orientation�
3USB 3�1 Gen1 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
4Headphone Jack
This connector is provided for headphones or speakers�
5Microphone Jack
This connector is provided for microphones�
6HDMI-Out Port
The High-Denition Multimedia Interface (HDMI) is an all-digital audio/
video interface capable of transmitting uncompressed streams� HDMI
supports all TV format, including standard, enhanced, or high-denition
video, plus multi-channel digital audio on a single cable�
7PS/2® Keyboard / Mouse Port
The PS/2® keyboard / Mouse DIN connector for PS/2® keyboard / Mouse�
8USB 3�1 Gen1 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
9VGA Port
The VGA port supports monitors and other VGA interface devices�
Overview
1-131-12
10 DVI-D Port
The DVI-D (Digital Visual Interface-Digital) connector allows you to
connect a LCD monitor� It provides a high-speed digital interconnection
between the computer and its display device� To connect an LCD
monitor, sim-ply plug your monitor cable into the DVI-D connector, and
make sure that the other end of the cable is properly connected to your
monitor (refer to your monitor manual for more information�)
11 DisplayPort
DisplayPort is a digital display interface standard� This connector is used
to connect a monitor with DisplayPort inputs�
12 LAN Jack
The standard RJ-45 LAN jack is provided for connection to the Local
Area Network (LAN)� You can connect a network cable to it�
Green/ OrangeYellow
LED Color LED State Condition
Left Yellow O LAN link is not established�
On (steady state) LAN link is established�
On (blinking) The computer is communicating with
another computer on the LAN�
Right Green O 10 Mbit/sec data rate is selected�
On 100 Mbit/sec data rate is selected�
Orange On 1000 Mbit/sec data rate is selected�
13 USB 3�1 Gen1 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
14 USB 2�0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such as
keyboard, mouse, or other USB-compatible devices�
15 Line-In
Used for connecting external audio outputting devices�
16 Line-Out
Used as a connector for speakers or headphone�
Overview
1-151-14
17 Mic
Used as a connector for a microphone�
18 RS-Out
Rear surround sound line out in 4/ 5�1/ 7�1 channel mode�
19 CS-Out
Center/ subwoofer line out in 5�1/ 7�1 channel mode�
20 SS-Out
Side surround sound line out in 7�1 channel mode�
21 Ventilator
The ventilator on the enclosure is used for air convection and to prevent
the equipment from overheating� Do not cover the ventilator�
22 Power Supply Switch
Switch this switch to
-
can turn on the power supply� Switch it to
0
to cut
o the power circulation.
23 Power Jack
Power supplied through this jack supplies power to your system�
24 LED Button
Press the button to turn on or o the LED.
25 ODD Eject Button
Press the button to eject the optical disc drive�
Important
High-speed devices are recommended for USB 3�1 ports whereas low-speed devices,
such as mouse or keyboard, are suggested to be plugged into the USB 2�0 ports�
Overview
1-151-14
1
5 234
20
22
21
23
24
Codex 3 B913 (B250)
13
17
14
6
7
8
10
1819
16
9
11
12
15
Overview
1-171-16
1Power Button
Press the power button to turn the system on and o.
2USB 3�1 Gen1 Port (Type C)
USB Type C port is allowing for reversible plug orientation�
3USB 2�0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such as
keyboard, mouse, or other USB-compatible devices�
4Headphone Jack
This connector is provided for headphones or speakers�
5Microphone Jack
This connector is provided for microphones�
6PS/2® Keyboard / Mouse Port
The PS/2® keyboard / Mouse DIN connector for PS/2® keyboard / Mouse�
7USB 2�0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such as
keyboard, mouse, or other USB-compatible devices�
8DVI-D Port
The DVI-D (Digital Visual Interface-Digital) connector allows you to
connect a LCD monitor� It provides a high-speed digital interconnection
between the computer and its display device� To connect an LCD
monitor, sim-ply plug your monitor cable into the DVI-D connector, and
make sure that the other end of the cable is properly connected to your
monitor (refer to your monitor manual for more information�)
9DisplayPort
DisplayPort is a digital display interface standard� This connector is used
to connect a monitor with DisplayPort inputs�
10 HDMI-Out Port
The High-Denition Multimedia Interface (HDMI) is an all-digital audio/
video interface capable of transmitting uncompressed streams� HDMI
supports all TV format, including standard, enhanced, or high-denition
video, plus multi-channel digital audio on a single cable�
Overview
1-171-16
11 LAN Jack
The standard RJ-45 LAN jack is provided for connection to the Local
Area Network (LAN)� You can connect a network cable to it�
Green/ OrangeYellow
LED Color LED State Condition
Left Yellow O LAN link is not established�
On (steady state) LAN link is established�
On (blinking) The computer is communicating with
another computer on the LAN�
Right Green O 10 Mbit/sec data rate is selected�
On 100 Mbit/sec data rate is selected�
Orange On 1000 Mbit/sec data rate is selected�
12 USB 3�1 Gen1 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
13 USB 3�1 Gen1 Port (Type C)
USB Type C port is allowing for reversible plug orientation�
14 Line-In
Used for connecting external audio outputting devices�
15 Line-Out
Used as a connector for speakers or headphone�
16 Mic
Used as a connector for a microphone�
17 RS-Out
Rear surround sound line out in 4/ 5�1/ 7�1 channel mode�
18 CS-Out
Center/ subwoofer line out in 5�1/ 7�1 channel mode�
19 SS-Out
Side surround sound line out in 7�1 channel mode�
Overview
1-191-18
20 Ventilator
The ventilator on the enclosure is used for air convection and to prevent
the equipment from overheating� Do not cover the ventilator�
21 Power Supply Switch
Switch this switch to
-
can turn on the power supply� Switch it to
0
to cut
o the power circulation.
22 Power Jack
Power supplied through this jack supplies power to your system�
23 LED Button
Press the button to turn on or o the LED.
24 ODD Eject Button
Press the button to eject the optical disc drive�
Important
High-speed devices are recommended for USB 3�1 ports whereas low-speed devices,
such as mouse or keyboard, are suggested to be plugged into the USB 2�0 ports�
Overview
1-191-18
9
1214
17
1
6
5 234
7
8
10
11
13
15
16
18
19
Codex 3 B913 (H110)
Overview
1-211-20
1Power Button
Press the power button to turn the system on and o.
2USB 3�1 Gen1 Port (Type C)
USB Type C port is allowing for reversible plug orientation�
3USB 2�0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such as
keyboard, mouse, or other USB-compatible devices�
4Headphone Jack
This connector is provided for headphones or speakers�
5Microphone Jack
This connector is provided for microphones�
6PS/2® Keyboard / Mouse Port
The PS/2® keyboard / Mouse DIN connector for PS/2® keyboard / Mouse�
7USB 2�0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such as
keyboard, mouse, or other USB-compatible devices�
8HDMI-Out Port
The High-Denition Multimedia Interface (HDMI) is an all-digital audio/
video interface capable of transmitting uncompressed streams� HDMI
supports all TV format, including standard, enhanced, or high-denition
video, plus multi-channel digital audio on a single cable�
9VGA Port
The DB15-pin female port is provided for monitor�
Overview
1-211-20
10 LAN Jack
The standard RJ-45 LAN jack is provided for connection to the Local
Area Network (LAN)� You can connect a network cable to it�
Green/ OrangeYellow
LED Color LED State Condition
Left Yellow O LAN link is not established�
On (steady state) LAN link is established�
On (blinking) The computer is communicating with
another computer on the LAN�
Right Green O 10 Mbit/sec data rate is selected�
On 100 Mbit/sec data rate is selected�
Orange On 1000 Mbit/sec data rate is selected�
11 USB 3�1 Gen1 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate and is backward-compatible with
USB 2�0 devices�
12 Line-In
Used for connecting external audio outputting devices�
13 Line-Out
Used as a connector for speakers or headphone�
14 Mic
Used as a connector for a microphone�
15 Ventilator
The ventilator on the enclosure is used for air convection and to prevent
the equipment from overheating� Do not cover the ventilator�
16 Power Supply Switch
Switch this switch to
-
can turn on the power supply� Switch it to
0
to cut
o the power circulation.
17 Power Jack
Power supplied through this jack supplies power to your system�
Overview
1-231-22
18 LED Button
Press the button to turn on or o the LED.
19 ODD Eject Button
Press the button to eject the optical disk drive�
Important
High-speed devices are recommended for USB 3�1 ports whereas low-speed devices,
such as mouse or keyboard, are suggested to be plugged into the USB 2�0 ports�
Overview
1-231-22
Component Replacement & Upgrade
Please note that certain components preinstalled in the product may be upgradable or
replaceable by user’s request depending on the models users purchased�
For any further information on the product users purchased, please contact the local
dealer� Do not attempt to upgrade or replace any component of the product if you are
not an authorized dealer or service center, since it may cause the warranty void� It is
strongly recommended that you contact the authorized dealer or service center for any
upgrade or replace service�
2
Getting Started
This chapter provides you with the information on hardware setup procedures�
While connecting peripheral devices, be careful in holding the devices and use
a grounded wrist strap to avoid static electricity�
Getting Started
2-32-2
Safety & Comfort Tips
The Personal Computer System is a portable platform that allows you to work anywhere�
However, choosing a good workspace is important if you have to work with your PC for
a long period of time�
1� Your work area should have enough illumination�
2� Choose the proper desk and chair and adjust their height to t your posture when
operating�
3� When sitting on the chair, sit straight and keep a good posture� Adjust the chair’s
back (if available) to support your back comfortably�
4� Place you feet at and naturally on the oor, so that your knees and elbows have
the proper position (about 90-degree) when operating�
5� Put your hands on the desk naturally to support your wrists�
6� Avoid using your PC in a place where discomfort may occur (such as on the bed)�
7� The Personal Computer System is an electrical device� Please treat it with great
care to avoid personal injury�
Getting Started
2-32-2
Hardware Setup
hConnecting the AC Power
1. Unpack the package to nd the AC power cord. Plug one end of the AC power cord
to the Personal Computer System�
2� Plug the male end to the electrical outlet�
hDisconnecting the AC Power
3. Unplug the AC power cord from the electrical outlet rst.
4� Unplug the AC power cord from the Personal Computer System�
2
3
4
1
Important
When unplugging the AC power cord, always hold the connector part of the cord� Never
pull the cord directly�
Getting Started
PB2-4
hPowering on the System
Press the power button to power on the system�
3
System Operations
This chapter provides you with essential information on system operations�
Important
All information is subject to change without prior notice�
3-3
System Operations
3-2
Power Management
Power management of personal computers (PCs) and monitors has the potential to
save signicant amounts of electricity as well as deliver environmental benets.
To be energy ecient, turn o your display or set your PC to sleep mode after a period
of user inactivity�
hPower Management in Windows 10
■[Power Options] in Windows OS allow you to control the power management
features of your display, hard drive, and battery� Right-click [Start] , select
[Control Panel] from the list and then click [System and Security]�
Select [Power Options] and choose a power plan that suits your personal
needs. You may also ne-tune the settings by clicking [Change plan settings].
■The Shut Down Computer menu presents the options of Sleep (S3/S4) & Shut
Down (S5) for rapid and easy management of your system power�
hPower Management through ENERGY STAR
qualied monitors
The power management feature allows the computer to initiate a
low-power or “Sleep” mode after a period of user inactivity� When
used with an external ENERGY STAR qualied monitor, this feature
also supports similar power management features of the monitor�
To take advantage of these potential energy savings, the power
management feature has been preset to behave in the following
ways when the system is operating on AC power:
■ Turn o the display after 10 minutes
■Initiate Sleep after 30 minutes
3-3
System Operations
3-2
hWaking the System Up
The computer shall be able to wake up from power saving mode in response to a
command from any of the following:
■the power button,
■the network (Wake On LAN),
■the mouse,
■the keyboard�
Energy Saving Tips:
■ Turn o the monitor by pressing the monitor power button after a period of user
inactivity�
■Tune the settings in Power Options under Windows OS to optimize your PC’s
power management�
■Install power saving software to manage your PC’s energy consumption�
■ Always disconnect the AC power cord or switch the wall socket o if your PC
would be left unused for a certain time to achieve zero energy consumption�
3-5
System Operations
3-4
Network Connection (Windows 10)
hWired Network
1� Right-click [Start] and select [Control Panel] from the list�
2� Select [View network status and tasks] under [Network and Internet]�
3� Select [Set up a new connection or network]�
3-5
System Operations
3-4
4� Choose [Connect to the Internet] and click [Next]�
5� Select [Broadband (PPPoE)] to connect using DSL or cable that requires a user
name and password�
6� Type the information from your Internet Service Provider (ISP) and click [Connect] to
establish your LAN connection�
3-7
System Operations
3-6
hWireless Network
1� Go to [Start] , click [Settings] and select [Network and Internet]�
2� A list of available WLAN connections pops up� Choose a connection from the list�
3� To establish a new connection, select [Network and Sharing Center]�
4� Select [Set up a new connection or network]�
5� Followingly, choose [Manually connect to a wireless network] and click [Next] to
continue�
6� Enter information for the wireless network you intend to add and click [Next] to
proceed�
7� A new WLAN connection has been made�
3-7
System Operations
3-6
System Recovery (Windows 10)
The purposes for using the System Recovery Function may include:
■Restore the system back to the initial status of original manufacturer’s default
settings�
■When some errors have occurred to the operating system in use�
■ When the operating system is aected by virus and is not able to work normally.
■When you want to install the OS with other built-in languages�
Before using the System Recovery Function, please back up the important data saved
on your system drive to other storage devices�
If the following solution fails to recover your system, please contact the authorized local
distributor or service center for further assistance�
3-9
System Operations
3-8
Reset this PC
1� Go to [Start] , click [Settings] and select [Update and security]�
2� Select [Recovery] and click [Get started] under [Reset this PC] to start the system
recovery�
3. The [Choose an option] screen pops up. Choose between [Keep my les] and
[Remove everything]�
Reset this PC
Keep my les
Remove everything
Only the drive where
Windows is installed
Just remove my les
Remove les and clean the drive
All drives Just remove my les
Remove les and clean the drive
3-9
System Operations
3-8
hKeep my les
1. Select [Keep my les].
2� The [Your apps will be removed] screen shows a list of apps that will need to be
reinstalled from the web or installation discs� Click [Next] to continue�
3� The next screen will show the changes to be made during the process� Click [Reset]
to start the system reset�
PB
System Operations
3-10
hRemove everything
1� Select [Remove everything]�
2� If you have multiple hard drives, a screen will pop up, asking you to choose between
[Only the drive where Windows is installed] and [All drives]�
3. Then select between [Just remove my les] and [Remove les and clean the drive].
4� The next screen will show the changes to be made during the process� Click [Reset]
to start the system reset�