Table of Contents
- Preface
- Introductions
- How To Get Started
- Begin to Use the Notebook
- How to Use the Notebook Safely
- How to Manage Power Supply
- How to Set Up Power Plan in Windows
- How to Use the Keyboard
- How to Use Touchpad
- What is Hard Disk Drive
- What is Solid State Drive
- How to Use PCIe / SATA SSD Combo Slot
- How to Use Optical Disc Drive
- How to Connect the Internet
- How to Set Up Bluetooth Connection
- How to Connect External Devices
- How to Use Multiple Monitors
- How to Use RAID Function
- How to Select Boot Mode in BIOS while installing OS
- How to Use Recovery Partition
- How to Use MSI One Touch Install
- Where Are Key Components
MSI WT72 6QL-1406US User Manual
Displayed below is the user manual for WT72 6QL-1406US by MSI which is a product in the Notebooks category. This manual has pages.
Related Manuals
Preface
Notebook User's Manual
1
1-2
Notebook User's Manual
Content
Preface ..................................................................................................1-1
Regulations and Statements ........................................................................................1-4
FCC-B Radio Frequency Interference Statement ..................................................1-4
FCC Conditions .........................................................................................................1-4
CE Conformity ...........................................................................................................1-4
Battery Regulations ...................................................................................................1-5
WEEE Statement ......................................................................................................1-5
Japan JIS C 0950 Material Declaration ...................................................................1-6
India RoHS .................................................................................................................1-6
Turkey EEE regulation ..............................................................................................1-6
Ukraine restriction of hazardous substances .......................................................... 1-6
Vietnam RoHS ...........................................................................................................1-6
Safety Instructions ......................................................................................................... 1-7
Optical Disc Drive Notice .............................................................................................. 1-9
Trademarks ....................................................................................................................1-9
Revision History ............................................................................................................. 1-9
Introductions .......................................................................................2-1
Manual Map ................................................................................................................... 2-2
Unpacking ...................................................................................................................... 2-2
Product Overview .......................................................................................................... 2-3
Top-open View ..........................................................................................................2-3
Front Side View ......................................................................................................... 2-7
Right Side View .........................................................................................................2-8
Left Side View ............................................................................................................ 2-9
Rear Side View .........................................................................................................2-11
Bottom Side View .................................................................................................... 2-13
Specifications ............................................................................................................... 2-14
How To Get Started ............................................................................3-1
Begin to Use the Notebook ........................................................................................... 3-2
How to Use the Notebook Safely .................................................................................3-3
How to Manage Power Supply .....................................................................................3-4
AC/DC Adapter ..........................................................................................................3-4
Battery Power ............................................................................................................3-4
How to Set Up Power Plan in Windows .......................................................................3-6
How to Use the Keyboard .............................................................................................3-8
1-3
Preface
Windows Key .............................................................................................................3-8
Switch Display ...........................................................................................................3-8
Disable or Enable Touchpad ...................................................................................3-8
Enter Sleep Mode ......................................................................................................3-9
Adjust the Brightness Levels of the Display ............................................................3-9
Adjust the Sound Level of the Speaker .................................................................... 3-9
Adjust the Brightness Levels of the Keyboard Backlight LED .............................. 3-10
Quick Launch Keys ................................................................................................. 3-10
How to Use Touchpad ................................................................................................ 3-12
What is Hard Disk Drive .............................................................................................. 3-13
What is Solid State Drive ............................................................................................ 3-13
How to Use PCIe / SATA SSD Combo Slot ............................................................... 3-14
Types of Slot and SSD ............................................................................................ 3-15
Uninstallation and Installation ................................................................................. 3-15
How to Use Optical Disc Drive ...................................................................................3-16
How to Connect the Internet ....................................................................................... 3-17
Wireless LAN ........................................................................................................... 3-17
Wired LAN ............................................................................................................... 3-19
How to Set Up Bluetooth Connection ........................................................................3-23
Activating Bluetooth Connection ............................................................................3-23
How to Connect External Devices .............................................................................3-25
How to Use Multiple Monitors ..................................................................................... 3-26
How to Use RAID Function ......................................................................................... 3-27
How to Select Boot Mode in BIOS while installing OS .............................................3-28
How to Use Recovery Partition ..................................................................................3-29
How to Use MSI One Touch Install ...........................................................................3-30
Where Are Key Components ...................................................................................... 3-31
1-4
Notebook User's Manual
Regulations and Statements
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and radiates radio frequency energy,
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
▶Reorient or relocate the receiving antenna.
▶Increase the separation between the equipment and receiver.
▶Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
▶Consult the dealer or an experienced radio TV technician for help.
NOTE
▶The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
▶Shield interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
▶This device may not cause harmful interference.
▶This device must accept any interference received, including interference that
may cause undesired operation.
CE Conformity
This device is in compliance with the essential safety requirements and
other relevant provisions set out in the European Directive.
1-5
Preface
Battery Regulations
European Union: Batteries, battery packs, and accumulators
should not be disposed of as unsorted household waste. Please
use the public collection system to return, recycle, or treat them
in compliance with the local regulations.
廢電池請回收
Taiwan: For better environmental protection, waste batteries
should be collected separately for recycling or special disposal.
California, USA: The button cell battery may contain perchlorate material and
requires special handling when recycled or disposed of in California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/
perchlorate/
WEEE Statement
European Union: Under the European Union ("EU") Direc-
tive on Waste Electrical and Electronic Equipment, Directive
2002/96/EC, which takes effect on August 13, 2005, products
of "electrical and electronic equipment" cannot be discarded
as municipal waste anymore and manufacturers of covered
electronic equipment will be obligated to take back such
products at the end of their useful life.
1-6
Notebook User's Manual
Japan JIS C 0950 Material Declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, mandates
that manufacturers provide material declarations for certain categories of electronic
products offered for sale after July 1, 2006.
http://www.msi.com/html/popup/csr/cemm_jp.html
http://tw.msi.com/html/popup/csr_tw/cemm_jp.html
India RoHS
This product complies with the "India E-waste (Management and Handling) Rule
2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated
biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight
% and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of
the Rule.
Turkey EEE regulation
Conforms to the EEE Regulations of the Republic Of Turkey.
Ukraine restriction of hazardous substances
The equipment complies with requirements of the Technical Regulation, approved
by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 №
1057, in terms of restrictions for the use of certain dangerous substances in
electrical and electronic equipment.
Vietnam RoHS
As from December 1, 2012, all products manufactured by MSI comply with Circular
30/2011/TT-BCT temporarily regulating the permitted limits for a number of
hazardous substances in electronic and electric products.
1-7
Preface
Safety Instructions
Read the safety instructions carefully and thoroughly. All cautions
and warnings on the equipment or user’s manual should be noted.
Keep this equipment away from humidity and high temperature.
Lay this equipment on a stable surface before setting it up.
The openings on the enclosure are used for air convection and
to prevent the equipment from overheating. Do not cover the
openings.
• Do not leave the equipment in an unconditioned environment
with a storage temperature above 60ºC (140ºF) or below 0ºC
(32ºF), which may damage the equipment.
• This unit should be operated under maximum ambient
temperature of 35ºC (95ºF).
• Make sure the power voltage is within safety range and has
been adjusted properly to the value of 100~240V before
connecting the equipment to the power outlet.
• Always unplug the AC power cord before installing any add-on
card or module to the equipment.
• Always disconnect the AC power cord or uninstall the battery
pack or switch off the wall socket if the equipment would be left
unused for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on
it. Do not place anything on top of the power cord.
Always keep the strong magnetic or electrical objects away from
the equipment.
1-8
Notebook User's Manual
• To prevent explosion caused by improper battery replacement,
use the same or equivalent type of battery recommended by the
manufacturer only.
• Always keep the battery in a safe place.
Never pour liquid into the opening that could damage the
equipment or cause an electrical shock.
If any of the following situations arises, get the equipment checked
by a service personnel:
• The power cord or plug is damaged.
• Liquid has penetrated into the equipment.
• The equipment has been exposed to moisture.
• The equipment has not worked well or you can not get it work
according to User’s Manual.
• The equipment was dropped and damaged.
• The equipment has obvious signs of breakage.
Green Product Features
• Reduced energy consumption during use and stand-by
• Limited use of substances harmful to the environment and
health
• Easily dismantled and recycled
• Reduced use of natural resources by encouraging recycling
• Extended product lifetime through easy upgrades
• Reduced solid waste production through take-back policy
Environmental Policy
• The product has been designed to enable proper reuse of parts
and recycling and should not be thrown away at its end of life.
• Users should contact the local authorized point of collection for
recycling and disposing of their end-of-life products.
• Visit the MSI website and locate a nearby distributor for further
recycling information.
• Users may also reach us at gpcontdev@msi.com for
information regarding proper disposal, take-back, recycling, and
disassembly of MSI products.
1-9
Preface
Optical Disc Drive Notice
CAUTION: This appliance contains a laser system and is classified as a “CLASS
1 LASER PRODUCT.” To use this model properly, read the instruction manual
carefully and keep this manual for your future reference. In case of any trouble with
this model, please contact your nearest “AUTHORIZED service station.” To prevent
direct exposure to the laser beam, do not try to disassemble the enclosure.
Trademarks
▶All trademarks are the properties of their respective owners.
Revision History
▶Version: 1.0
▶ Date: 09, 2015
1-10
Notebook User's Manual
Notebook User's Manual
Introductions
2
2-2
Notebook User's Manual
Congratulations on becoming an user of this notebook, the finely designed
notebook. You will have a delightful and professional experience in using this
exquisite notebook. We are proud to tell users that this notebook is thoroughly
tested and certified by our reputation for unsurpassed dependability and customer
satisfaction.
Manual Map
This User’s Manual provides instructions and illustrations on how to operate
this notebook. It is recommended to read this manual carefully before using this
notebook.
Chapter 1, Preface, gives users the basic safety information and caution that is
interrelated to using this notebook.
Chapter 2, Introductions, gives the brief introductions to the notebook, including
overviews, function buttons, quick launch buttons, connectors, LEDs, etc.
Chapter 3, How to Get Started, gives the basic operation instructions to help users
getting familiar with this notebook.
Unpacking
First, unpack the shipping carton and check all items carefully. If any item contained
is damaged or missing, please contact your local dealer immediately. Also, keep
the box and packing materials in case you need to ship the unit in the future. The
package should contain the following items:
▶Notebook
▶Quick Start Guide
▶AC/DC adapter and AC power cord
▶Optional carry bag
▶Optional all-in-one application disk, containing the full version of user’s manual,
drivers, utilities, and recovery function
2-3
Introductions
Product Overview
This section provides the description of basic aspects of the notebook. It will help
you to know more about the appearance of this notebook before using it. Please be
aware that the figures shown here are for reference only.
Top-open View
The figure of top-open view and description shown below will lead you to browse
the main operating area of your notebook.
2-4
Notebook User's Manual
1. Webcam/ Webcam LED/ Internal Microphone
• This built-in webcam can be used for picture taking, video recording or
conferencing, and so on.
• Webcam LED indicator, next to the webcam, glows when webcam function is
activated; LED goes out when this function is turned off.
• The built-in microphone works the same as an external microphone.
2. Stereo Speakers
Give high quality sound blaster with stereo system and Hi-Fi function supported.
3. Status LED
Caps Lock
• LED glows when Caps Lock function is enabled.
• LED goes out when this function is disabled.
Num Lock
• LED glows when Num Lock function is enabled.
• LED goes out when this function is disabled.
4. Touchpad
This is the pointing device of the notebook.
5. Quick Launch Buttons
Use the quick launch buttons to activate the specific applications or tools. The
following quick launch buttons will only be functional in the operating system with
the SCM application installed. Find the SCM application in the optional all-in-
one disk that comes with the package for easy and convenient operation. It is
strongly recommended to install the SCM application.
Power
Power Button
• Use this button to turn the notebook power ON and OFF.
• Use this button to awake the notebook from the sleep
state.
Power LED
• LED glows when the notebook power is turned on.
• LED goes off when the notebook is turned off.
2-5
Introductions
Graphics Switch
• Use this button to select either discrete GPU mode or
UMA GPU mode.
• Button LED glows white when the discrete GPU mode is
selected.
Cooler Boost
• Use this button to maximize the fan speed to cool down
the overall temperature of the notebook.
• Button LED glows when the fan speed is set to maximum
level; LED goes off when AUTO mode is selected.
Keyboard LED
Manager
(optional)
• This keyboard is equipped with flash keyboard LEDs
which are mounted beneath the keyboard.
• Press this button, it will flash white once and bring up the
KLM (Keyboard LED Manager) application.
• If the KLM application is removed, this button will not
function.
P2
(optional)
• Press the P2 key to launch the particular application.
• If user left this key undefined, press this key would bring
up the User Define Key dialogue.
6. Keyboard
The built-in keyboard provides all the functions of a full-sized keyboard.
Quick Launch [Fn] Keys
Use the [Fn] keys on the keyboard to activate the specific applications or tools.
With the help of these keys, users will be able to work more efficiently.
The following keys will only be functional in the operating system with the SCM
application installed.
+
User Dened
(optional)
• Press and hold the Fn and F4 keys to launch the User
Defined application.
+
ECO Engine
(Power Saving)
• Press and hold the Fn key, and then press the F5
key repeatedly to switch among various power saving
modes provided by ECO Engine, or to turn this
function off recurrently.
2-6
Notebook User's Manual
+
Webcam
• Press and hold the Fn key, and then press the F6 key
to turn the Webcam function on. Press again to turn it
off.
+
Shift
(optional)
• Press and hold the Fn key, and then press the F7 key
to switch among Sport / Comfort / Green modes and
shift the performance.
• This function will only be activated when AC Power is
plugged-in, and the default setting is Sport mode.
+
Airplane mode
• Press and hold the Fn key, and then press the F10 key
repeatedly to turn Airplane mode on or off recurrently.
• For flight safety consideration, it is always
recommended to turn Airplane mode on when you are
in flight.
• Refer to the Airplane mode switch icon under [Start/
Settings/ Change PC settings/ Network / Airplane
mode] on the desktop to check the device status.
+
Shortcut Manager
(optional)
• Press and hold the Fn key, and then press the F11 key
to bring up the Shortcut Manager application.
+
True Color
• This notebook may be pre-installed the True Color
application. With this application, users can select
various color settings for the best viewing experience.
• Press and hold the Fn key, and then press the Z key to
launch the True Color application.
+
True Color
Selections
• Press and hold the Fn key, and then press the A key to
change different view modes.
2-7
Introductions
Front Side View
1. Status LED
WLAN(WiFi)
Wireless LAN (WiFi)
• LED glows when Wireless LAN (WiFi) function is
enabled.
• LED goes out when this function is disabled.
Battery Status
• LED glows when the battery is being charged.
• Continuously blinking if the battery fails and it is
recommended to replace a new battery.
• Consult the local dealer for replacing an equivalent
type of battery recommended by the manufacturer.
• Battery LED goes out when it is fully charged or when
the AC/DC adapter is disconnected.
Drive Activity Indicator
LED blinks when the system is accessing the internal
storage drives.
2-8
Notebook User's Manual
Right Side View
1. Optical Disc Drive
This notebook is equipped with an optical disc drive. The actual device
preinstalled in the notebook depends on the model you purchased.
2. USB 3.0 Ports
USB 3.0, the SuperSpeed USB, delivers the higher interface speeds for
connecting various devices, such as storage devices, hard drives, or video
cameras, and offers more advantages over high-speed data transferring.
2-9
Introductions
Left Side View
1. USB 3.0 Ports
USB 3.0, the SuperSpeed USB, delivers the higher interface speeds for
connecting various devices, such as storage devices, hard drives, or video
cameras, and offers more advantages over high-speed data transferring.
2. USB 3.0 Port/ Super Charger USB Port
USB 3.0, the SuperSpeed USB, delivers the higher interface speeds for
connecting various devices, such as storage devices, hard drives, or video
cameras, and offers more advantages over high-speed data transferring.
Super Charger USB port provides faster power charging function for Apple
devices when the notebook is in power off mode.
3. Audio Port Connectors
Make high quality sound blaster with stereo system and Hi-Fi function supported.
Headphone
A connector for speakers or headphones.
Microphone
Used for an external microphone.
Line In
• Used for an external audio device.
• Connect the Rear speakers here.
2-10
Notebook User's Manual
Line Out
• A connector for speakers.
• Connect the Surround speakers here.
4. Card Reader
The built-in card reader may support SD4.0 (Secure Digital) card. Contact the
local dealer for further and correct information and be noted that the supported
memory cards may vary without notice.
2-11
Introductions
Rear Side View
1. Kensington Lock
This notebook provides a Kensington lock hole, which allows users to secure
the notebook in place with a key or some mechanical PIN device and attached
through a rubberized metal cable. The end of the cable has a small loop which
allows the whole cable to be looped around a permanent object, such as a heavy
table or other similar equipment, thus securing the notebook in place.
2. Mini-DisplayPort
The Mini-DisplayPort is a miniaturized version of the DisplayPort, with a suitable
adapter, the Mini-DisplayPort may be used to drive displays with a VGA, DVI or
HDMI interface.
3. USB SuperPort (Type C) (optional)
The USB SuperPort (Type C), exclusively designed by MSI, supports
Thunderbolt 3 (optional), DisplayPort and USB 3.1 connections with a single
connector.
4. RJ-45 Connector
The 10/100/1000 Ethernet connector is used to connect a LAN cable for network
connection.
5. Ventilator
The ventilator is designed to cool the system. DO NOT block the ventilator for air
circulation.
2-12
Notebook User's Manual
6. HDMI Connector
HDMI (High Definition Multimedia Interface) is a new interface standard for PCs,
displays and consumer electronics devices that supports standard, enhanced
and high-definition video, plus multi-channel digital audio on a single cable.
7. Power Connector
This connector is to connect the AC/DC adapter and supply power for the
notebook.
2-13
Introductions
Bottom Side View
1. Ventilator
The ventilator is designed to cool the system. DO NOT block the ventilator for air
circulation.
2. Subwoofer Speaker
The subwoofer speaker is to reproduce low-pitched audio frequencies known as
bass.
3. Battery Reset Hole
Whenever the system firmware (EC) is upgraded or the system hangs, please
1) power off the notebook; 2) connect the AC power; 3) use a straightened
paperclip to insert this hole and reset the notebook; 4) power on the notebook.
2-14
Notebook User's Manual
Specifications
The specification may change without notice. The actual products sold are different
from areas. Please check the detailed specification with your local dealers.
Physical Characteristic
Dimension 428 (W) x 249 (D) x 48 (H) mm
Weight 3.85kg with battery
CPU
Package FCBGA
Processor Type
(optional) Intel® Quad/ Dual Core processor
L3 Cache Up to 8MB (Embedded in CPU)
Core Chip
Platform Controller
Chip Intel® PCH-H
Memory
Technology DDR4 2133/ 2400MHz
Memory DDR4 SO-DIMM slots x 4
8G/ 16G, ECC/ non-ECC DDR4 SDRAM
Maximum Up to 64GB
Power
AC/DC Adapter
230W, 19.5V
Input: 100~240V, ~3.2A, 50~60Hz
Output: 19.5V 11.8A
Battery Type 9-cell
RTC Battery Yes
2-15
Introductions
Storage (items listed here may very without notice)
HDD form factor 2.5" HDD
SSD (optional) M.2 slot x 4
Support up to 4 SSD devices
Optical Drive Device
(optional) Super Multi / Blu-ray
MultiBay Supported
I/O Port
USB
x 6 (version 3.0)
x 1 SuperPort (Thunderbolt+DP+USB 3.1 10Gbps)
(optional)
Mic-in x 1
Line-in x 1
Side-out x 1
Headphone-out x 1 (S/PDIF-Out supported)
RJ45 x 1
HDMI x 1
Mini-DisplayPort x 1
Card Reader x 1 (SD4.0/ MMC)
The supported memory cards may vary without notice.
Communication Port
LAN 10/ 100/ 1000Mb Ethernet
Wireless LAN+
Bluetooth (optional) M.2 type
Display
LCD Type 17.3" LED panel
Brightness Controlled by K/B hot-keys
2-16
Notebook User's Manual
Video
Graphics
NVIDIA Quadro discrete MXM graphics card or Intel HD
UMA graphics card.
Discrete or UMA graphics card is switchable by GPU
Quick Launch Button.
VRAM Depends on the model you purchased.
HDMI output Supported
DisplayPort output Supported
Multi-Display Function Supported
WebCam
CMOS Camera FHD
Audio
Internal Speaker 2 speakers + 1 subwoofer
Sound Volume Adjusted by keyboard hot-key and switches.
Software & BIOS
USB Flash Boot USB floppy and USB flash boot up DOS
BIOS Fast Boot Support
Others
Compatibility WHQL
Kensington Lock Hole x 1
Notebook User's Manual
How To Get Started
3
3-2
Notebook User's Manual
Begin to Use the Notebook
For a new user of this notebook, we would like to suggest you follow the illustrations
below to begin to use the notebook.
3-3
How To Get Started
How to Use the Notebook Safely
If you are a beginner to the notebook, please read the following instructions to
assure your own safety, and make yourself comfortable during the operations.
▶Your work area should have enough illumination.
▶Choose an ergonomic chair and have it adjusted for your height.
▶Adjust the backrest to support your lower back comfortably when you are
sitting upright.
▶Place your feet flat on the floor with your knees bent to a 90 degrees.
▶Adjust the angle/position of the LCD panel to have an optimal view.
▶Use your notebook where you find easy to stay more comfortable position.
▶Change your sitting posture often.
▶Stretch and exercise your body regularly.
▶Remember to take a break after working for a period of time.
38-76 cm
15-20
90-120
3-4
Notebook User's Manual
How to Manage Power Supply
This section provides users basic safety precautions to take when using an AC/DC
adapter and battery power properly.
AC/DC Adapter
To safely and properly power on a notebook, it is strongly recommended to connect
the supplied power adapter before turning it on for the first time. Below are some
Do's and Don'ts of an AC/DC adapter.
▶DOs
• Use the adapter that shipped with your notebook only.
• Always be aware of heat coming from the in use AC/DC adapter.
▶DON'Ts
• Use other adapter of other brand since it may damage the notebook or
devices attached to it.
• Cover an in-use adapter since it can generate heat.
Battery Power
This notebook may be equipped with a high-capacity Li-ion or Li-polymer battery
pack depending on the model you have. The rechargeable Li-Polymer battery pack
is an internal power source of the notebook. Be aware of that this battery may not
be replaced by users.
▶Conserving Battery Power
Efficient battery power is critical to maintain normal operation. If the battery
power is not managed well, the saved data and customized settings may be
lost. To optimize battery life and avoid a sudden power loss, read the tips
below:
• Suspend system operation if the system will be idle for a while or shorten the
suspend timer’s time period.
• Turn off the system if you won’t be using it for a period of time.
• Disable unnecessary settings or remove idle peripherals.
• Connect an AC/DC adapter to the system whenever possible.
3-5
How To Get Started
▶Charging the Battery Pack
Please pay attention to the following tips before recharging the battery:
• If a charged battery pack is not available, save your work and close all
running programs and shut down the system.
• Plug in an AC/DC adapter.
• You can use the system, suspend system operation or shut down and turn
off the system without interrupting the charging process.
• The Li-ion or Li-polymer battery has no memory effect. It is unnecessary
to discharge the battery before recharging. However, to optimize the life of
battery, we suggest that consuming the battery power completely once a
month is necessary.
• The actual charging time will be determined by the applications in use.
3-6
Notebook User's Manual
How to Set Up Power Plan in Windows
Below steps show you how to save battery power for your notebook by using a
power-saving plan. Follow the instructions below to adjust the power management
settings in Windows OS:
Power Options in Windows OS allows you to control the power management
features of your display, hard drive, and battery.
1. Drag the mouse cursor to the left corner of the screen and [Start] icon will
show up. Right click the icon to show selection menu. Select [Control Panel] in
the menu.
2. Click [System and Security].
3. Click [Power Options].
4. Then select a power plan that meets your personal needs.
5. The Power icon will present options. You can wake up your computer from
power saving mode by clicking the power button.
3-7
How To Get Started
3-8
Notebook User's Manual
How to Use the Keyboard
This notebook provides a full functioned keyboard. To ensure that the keyboard will
be functional properly, it is recommended to have the SCM application installed in
your operating system.
Windows Key
You can find the Windws Logo key on the keyboard which
is used to perform Windows-specific functions, such as
opening the Start menu and launching the shortcut menu.
Switch Display
+
Switch the display output mode between the LCD, external
monitor and both.
Disable or Enable Touchpad
+
Enable or disable the touchpad function. (Optional)
3-9
How To Get Started
Enter Sleep Mode
+
Force the computer into sleep state (depending on the
system configuration). Press the Power button to wake up
the system from sleep state.
Adjust the Brightness Levels of the Display
+
Increase the LCD brightness.
+
Decrease the LCD brightness.
Adjust the Sound Level of the Speaker
+
Increase the built-in speaker’s volume.
+
Decrease the built-in speaker’s volume.
+
Mute the built-in speakers.
3-10
Notebook User's Manual
Adjust the Brightness Levels of the Keyboard
Backlight LED
+
Increase the brightness level of the keyboard backlight
LEDs.
+
Decrease the brightness level of the keyboard backlight
LEDs.
Quick Launch Keys
Use the [Fn] combination keys on the keyboard to activate the specific applications
or tools. With the help of these keys, users will be able to do work more efficiently.
+
User Dened
(optional)
• Press and hold Fn and F4 keys to launch the User
Defined application.
+
ECO Engine
(Power Saving)
• Press and hold the Fn key, and then press the F5 key
repeatedly to switch among various power saving modes
provided by ECO Engine, or to turn this function off
recurrently.
+
Webcam
• Press and hold the Fn key, and then press the F6 key to
turn the Webcam function on. Press again to turn it off.
+
Shift
(optional)
• Press and hold the Fn key, and then press the F7 key to
switch among Sport / Comfort / Green modes and shift
the performance.
• This function will only be activated when AC Power is
plugged-in, and the default setting is Sport mode.
+
Shortcut Manager
(optional)
• Press and hold the Fn key, and then press the F11 key to
bring up the Shortcut Manager application.
3-11
How To Get Started
+
Airplane mode
• Press and hold the Fn key, and then press the F10 key
repeatedly to turn Airplane mode on or off recurrently.
• For flight safety consideration, it is always recommended
to turn Airplane mode on when you are in flight.
• Refer to the Airplane mode switch icon under [Start/
Settings/ Change PC settings/ Network / Airplane
mode] on the desktop to check the device status.
+
True Color
• This notebook may be pre-installed the True Color
application. With this application, users can select various
color settings for the best viewing experience.
• Press and hold the Fn key, and then press the Z key to
launch the True Color application.
+
True Color
Selections
• Press and hold the Fn key, and then press the A key to
change different view modes.
Watch the instruction video at: https://www.youtube.com/watch?v=u2EGE1rzfrQ
YouTube Youku
3-12
Notebook User's Manual
How to Use Touchpad
The touchpad integrated in your notebook is a pointing device that is compatible
with standard mouse, allowing you to control the notebook by pointing the location
of the cursor on the screen.
▶Configure the Touchpad
You can customize the pointing device to meet your personal needs. For
example, if you are a left-handed user, you may want to swap the functions of
the two buttons. In addition, you can change the size, shape, moving speed
and other advanced features of the cursor on the screen.
To configure the touchpad, you can use the standard Microsoft or IBM PS/2
driver in your Windows operating system. The Mouse Properties in Control
Panel allows you to change the configuration.
▶Position and Move
Place your finger on the touchpad (usually using the forefinger), and the
rectangular pad will act as a miniature duplicate of your display. When you
move your fingertip across the pad, the cursor on the screen will move
simultaneously to the same direction. When your finger reaches the edge of
the pad, lift your finger and place it on a proper location of the touchpad to
continue the movement.
3-13
How To Get Started
▶Point and Click
When you have moved and placed the cursor over an icon, a menu item or
a command that you want to execute, simply tap slightly on the touchpad or
press the left button to select. This procedure, called as point and click is the
basics of operating your notebook. Unlike the traditional pointing device such
as the mouse, the whole touchpad can act as a left button, so that your each
tap on the touchpad is equivalent to pressing the left button. Tapping twice
more rapidly on the touchpad is to execute a double-click.
▶Drag and Drop
You can move files or objects in your notebook by using drag-and-drop. To do
so, place the cursor on the desired item and slightly tap twice on the touchpad,
and then keep your fingertip in contact with the touchpad on the second tap.
Now, you can drag the selected item to the desired location by moving your
finger on the touchpad, and then lift your finger from the touchpad to drop
the item into place. Alternately, you can press and hold the left button when
you select an item, and then move your finger to the desired location; finally,
release the left button to finish the drag-and-drop operation.
What is Hard Disk Drive
This notebook is equipped with a 2.5" HDD. It is usually used to install the operating
system and software applications. Do not remove or install the hard disk drive when
the notebook is turned on. The replacement of HDD should be operated by an
authorized retailer or a service representative.
What is Solid State Drive
This notebook may be equipped with a Solid State Drive (SSD). The solid state
drive is a storage device that stores data on solid state flash memory. Do not
remove or install the SSD when the notebook is turned on. The replacement of SSD
should be operated by an authorized retailer or a service representative.
3-14
Notebook User's Manual
How to Use PCIe / SATA SSD Combo Slot
The M.2 SSD slot in the notebook are compatible with SATA and PCIe interfaces,
providing diverse features to users . Please follow the instructions below to uninstall
or install the PCIe/ SATA SSDs.
Note: Any damage caused while replacing the device may void the warranty.
1. Loosen the screw that secures the optical disc drive.
2. Pull the optical disc drive out.
3. Loosen the screws that secure the back panel and remove it.
3-15
How To Get Started
Types of Slot and SSD
1. SATA Gen 3 M.2 Slot
2. SATA Gen 3 M.2 & PCIe 2.0 x2/ x4 Combo Slot
3. SATA Gen 3 M.2 2280 SSD
4. SATA Gen 3 M.2 or PCIe 2.0 x2/ x4 2280 SSD
Uninstallation and Installation
Uninstallation
Installation
3-16
Notebook User's Manual
How to Use Optical Disc Drive
This notebook may be equipped with an optical disc drive. Follow the instructions
below to insert a disc. Devices shown here are for reference only.
1. Confirm that the notebook is turned on.
2. Press the eject button on the panel and the disc tray will slide out partially.
3. Gently pull the tray out until fully extended.
4. Place the disc in the tray and confirm the disc is placed correctly. Slightly press
the center of the disc to secure it into place.
5. Push the tray back into the drive.
3-17
How To Get Started
How to Connect the Internet
Wireless LAN
Wireless LAN is a wireless broadband connection that allows you to connect to the
Internet without using any cables. Please follow the instructions below to set up a
Wireless LAN connection.
▶Turning Airplane mode off
For flight safety consideration, it is always recommended to turn Airplane mode
on when you are in flight. When Airplane mode is enabled, Wireless LAN
connection and Bluetooth will be turned off. Please make sure turning Airplane
mode off before setting up Wireless LAN connection.
Go to the desktop. (Please launch Desktop if you are in Win 8 Start screen.)
1. Find the [Settings] icon on the desktop and click on it.
2. Select [Airplane mode].
3. Unfold [Airplane mode] selections under [Networks]. Make sure [Airplane
mode] is set to off here.
3-18
Notebook User's Manual
▶Setup Wireless LAN
1. Unfold the setting menu by pointing the mouse to the lower-right corner of
the desktop and clicking it.
2. Click the [Wireless LAN] icon.
3. Select a Wireless LAN connection from the network list.
4. A security key will be required for connecting the selected network. Then
click [Next].
3-19
How To Get Started
Wired LAN
Using cables and network adapters to connect to the internet.
▶Setup Dynamic IP/PPPoE connection
Go to the desktop (Please launch Desktop if you are in Win 8 Start screen)
1. Point your mouse cursor to the LAN icon in the taskbar, and then right click
to select [Open Network and Sharing Center].
2. Choose [Change adapter settings].
3. Right click on [Ethernet] to select [Properties] from the drop-down menu.
4. In the Ethernet Properties window, select [Networking] tab and check
[Internet Protocol Version 4 (TCP/IPv4)]. Then click [Properties] to continue.
5. Select [General] tab, click [Obtain an IP address automatically] and [Obtain
DNS server address automatically]. Then click [OK].
3-20
Notebook User's Manual
6. Repeat step 1 to launch [Network and Sharing Center] again. Select [Set up
a new connection or network] under [Change your networking settings].
7. Choose [Connect to the Internet], and then click [Next].
8. Click [Broadband (PPPoE)].
9. Fills User name, Password, and Connection name fields. Then click
[Connect].
3-21
How To Get Started
3-22
Notebook User's Manual
▶Setup a static IP internet connection
1. Follow the previous steps 1 to 4 in [Setup Dynamic IP/PPPoE Connection].
2. Select [General] tab and click [Use the following IP address] and [Use the
following DNS server addresses]. You will be asked to enter the IP address,
Subnet mask, and Default gateway into the empty place , then click [OK].
3-23
How To Get Started
How to Set Up Bluetooth Connection
Bluetooth pairing is a process in which two Bluetooth devices communicate with
each other through an established connection.
Activating Bluetooth Connection
▶Turning Airplane mode off
Refer to the previous Wireless LAN section to turn Airplane mode off before
activating Bluetooth connection.
▶Pairing Bluetooth devices
Go to the desktop. (Please launch Desktop if you are in Win 8 Start screen.)
1. Point your mouse to the lower-right corner of the screen to bring the
taskbar, then click [Settings].
2. Select [Change PC settings].
3-24
Notebook User's Manual
3. Click "PC and devices" from the PC settings list.
4. Choose a desired Bluetooth device from the connection list, and then click
[Pair] to continue.
5. Match the passcode between the notebook and the selected Bluetooth
device, click [yes] to finish.
3-25
How To Get Started
How to Connect External Devices
This notebook may be equipped with various connecting I/O (input/output) ports,
such as USB, HDMI, DisplayPort, and mini DisplayPort. Users will be able to
connect diverse peripheral devices to the notebook.
To connect these devices, refer to the instruction manuals of each device first, and
then connect the device to the notebook. This notebook is capable to auto detect
the connected devices, and if there is no detection of the devices, please manually
enable the devices by going to [Start Menu / Control Panel / Hardware and Sound /
Add a device] to add the new devices.
3-26
Notebook User's Manual
How to Use Multiple Monitors
If users connect an additional monitor to the notebook, the system will automatically
detect the external monitor connected. Users will be allowed to customize the
display settings.
1. Connect the monitor to the notebook.
2. Press and hold the Windows key, and then press [P] key to bring up [Project].
3. Select a desired mode
▶PC screen only: shows the desktop on the monitor of the notebook only.
▶Duplicate: the desktop will be displayed on the monitor of the notebook and
the external monitor connected.
▶Extend: Extends the desktop across all of the monitors connected. This
option is useful if users want to increase the desktop area.
▶Second screen only: shows the desktop on the external monitor connected
only.
3-27
How To Get Started
How to Use RAID Function
This notebook may support RAID function of different levels. RAID allows users to
store data on multiple hard disk drives or solid-state drives. Contact the local dealer
for further and correct information and be noted that the supported RAID functions
may vary depending on the models users purchased.
Watch the instruction video at: https://youtu.be/u2C35-ctFbw
YouTube Youku
3-28
Notebook User's Manual
How to Select Boot Mode in BIOS while
installing OS
1. Power on the system. As soon as the first logo screen appears, press the DEL
key immediately and enter the BIOS menu.
2. Move the cursor to [Boot] tab, and select [Boot mode select] in Boot
Configuration.
3. For operating systems support UEFI-based BIOS (Windows 10 and Windows
8.1), it is suggested to select [UEFI].
4. For Windows 7 or previous versions of Windows, select [Legacy] mode.
3-29
How To Get Started
How to Use Recovery Partition
Watch the instruction video at: https://www.youtube.com/watch?v=zDZAKvmoMcA,
to recover the system to manufacturer’s default settings when it is needed.
YouTube Youku
3-30
Notebook User's Manual
How to Use MSI One Touch Install
MSI "One Touch Install", the one-click installer application, allows users to
efficiently install all needed drivers on MSI notebooks with a single click.
Watch the instruction video at:
Windows 8.1: https://www.youtube.com/watch?v=ERItRaJUKQs
Windows 7: https://www.youtube.com/watch?v=43lnM4m-500
YouTube Youku
Windows 8.1
YouTube Youku
Windows 7
3-31
How To Get Started
Where Are Key Components
In this section you will find information about main parts inside a notebook, some
may be upgradable or replaceable depending on the model purchased.
Don't try to upgrade your device yourself as unauthorized replacements may void
your warranty. To obtain service, please contact a local authorized service center.
1. HDD
2. Memory
3. M.2 SSD
4. Bluetooth/ WiFi combo card
5. ODD
3-32
Notebook User's Manual