Newline x7 User Manual
Displayed below is the user manual for x7 by Newline which is a product in the Signage Displays category. This manual has pages.
Related Manuals
Unied Collaboration Touch Screen
Quick Start Manual
Thanks for purchasing this product. Please read the instructions carefully
before using this product.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV technician for help.
The symbol of the crossed out wheeled bin indicates this product
should not be placed in municipal waste. Instead, you need to dispose
of the waste equipment by handing it over to a designated collection
point for the recycling of waste electrical and electronic equipment.
1
AParts and Functions
Parts
◆Front Elevation
◆Rear Elevation
1
2
3
4 5
6 7 8
9
12
11
10
1
2
3
4
5
6
7
8
9
12
11
10
Front Ports
Speakers
Microphone Array
Top Camera
Camera Indicator
Bottom Camera
Camera Indicator
Front Buttons
General Power Switch
AC Power
Internal PC
Ports in the Back Panel
2
◆Front Ports
Ports
USB
HDMI
3
◆Rear Ports
Central Control
RS-232
LAN
USBUSB
AUDIO
USB
USB
USB
HDMI
AUDIO
HDMI
High Speed USB Device
LAN Touch PortTouch PortHDMI Rear VGA IN AUDIO INRS-232
LINE OUT USB USB WIFI Antenna HDMI OUTUSB 3.0 SD CARD
4
◆Front Buttons
Buttons Operations Functions
Short press Power on/off
Short press Decrease volume
Long press for more than 1 second Decrease volume continuously
Short press Increase volume
Long press for more than 1 second Increase volume continuously
Short press Open the menu
Short press Go to the home page
Short press Return to last menu/Exit
5
Remote Control
Button Function
Power On/Off
Start the Default UC Programs
Mute
Microphone Mute
Conrm/OK
Up/Down/Left/Right
Return to Previous/Exit
Go to the Home Page
Open the Menu
Decrease Volume
Increase Volume
Settings
Page Up
Page Down
Switch to Top Camera
Switch Source to HDMI Rear
Switch Source to HDMI Front
Switch to Bottom Camera
Switch Source to VGA
Button Function
Switch Source to Internal PC
Toggle Display Mode
Zoom In (PC)
Zoom Out (PC)
6
◆Installation Environment
◆Installation Direction
Safety Precautions
Hang the Unit Horizontally No Vertical Installation Do Not Lay Flat
BInstallation
Keep Away From
Combustible Vapors
(gas leaks, etc.)
Do Not Use
Outdoors
Keep Temperature
Below 120
Degrees Fahrenheit
7
◆Installation Height
Recommend installation height is 33" (838mm) from the floor to the bottom of the
screen.
● The back of the panel is equipped with holes in VESA standard. Please use a VESA
mounting system.
● When using a mobile cart, please ensure the mobile cart has no less than 80kg
loading capacity.
Weight of the unit: 143.3 lb/65kg
● When using wall-mount bracket, please ensure the wall can support the weight
of the unit. We recommend that the wall surface is reinforced, and have a loading
capacity twice the weight of the unit. Please consult a professional installer for wall-
mount installation.
● Do not install the unit where it might be hit by a door.
◆Weight Loading
Installation Precautions
838mm
8
Ensure adequate ventilation and/or air conditioning environment. We recommend
to keep certain distance from the side of the unit to the wall or panels. Ventilation
requirement is showed in following gure.
The dimensions of the 4 bracket mounting holes in the back panel is VESA MIS-F
compliant (400 x 400mm). Please use the metric M8 screws with length of 10 to
15mm to secure the touch screen with the mounting system. Dimensions of the
mounting holes in the back panel is shown in the next page.
◆Ventilation
Installation
Please have a professional installer to install the display unit.
Note
Top≥200mm
Left≥100mm
Right≥100mm
Back≥200mm
Bottom≥200mm
9
Unit: mm
320
400
400
4-M8
594
1589
1049
10
Step 1: Plug in the power plug to the power outlet, and plug in the power connector
to the side of the unit. Please ensure the power is in the range of 100V-240V
with frequency at 50Hz/60Hz ±5%. The power current must be grounded.
Step 2: Turn on the general power switch located on the side of the unit.
Step 3: Press the power button in the front control panel or on the remote
control.
Step 1: If you are in the Meeting Start page, you can turn off the unit directly by
pressing in the front control panel or on the remote.
Step 2: If you are not going to use the unit for an extended period of time, we
recommend you to switch off the general power switch.
Power On
Power Off
General Power Switch
AC Power
CTurning On/Off
11
When the unit is turned on, it will show the Meeting Start page. From here, the user
can touch the screen to start a meeting, and the unit will go to the Home page. See
the following gures.
Figure 1 Meeting Start Page
Figure 2 Home Page
DSystem Applications
12
● Collaboration
The user can touch here to start the default UC programs, or touch the small triangle
to set three shortcuts for frequently used UC programs. The default UC program is
the one used last time.
● Whiteboard
The Whiteboard provides whiteboard and screen annotation functions.
● Sources
The user can select one of the four sources to display, including HDMI Front, HDMI
Rear, Internal PC and VGA.
● External Storage
Open up the le manager to open les from external USB disk.
● End
Press End to end a meeting. Uers will have the choice of saving the whiteboard
screen captures and ending the meeting. Once a meeting is ended, all screenshots
will be cleared.
Quick Access Buttons on Both Sides
● : Start Annotation
● : Start Whiteboard
● : Go to Home Page
● : Return to Previous App/Exit
● : Switch Apps
13
The easy setting menu can be accessed by sliding one nger down from the top of
the screen.
EEasy Setting Menu
For more information
Please visit www.newline-interactive.com.
Contact Us for Support
Please email us at support@newline-interactive.com.
Newline Interactive, Inc.
101 East Park Blvd. Suite 807
Plano, TX 75074
Tel: +1 (972) 468-9728
Fax: +1 (972) 422-4288
FMore Information
20302T5B4001010