Table of Contents
Origin Storage 2UF95AA-OS User Manual
Displayed below is the user manual for 2UF95AA-OS by Origin Storage which is a product in the Notebook Docks & Port Replicators category. This manual has pages.
Related Manuals
OSDOCK USBC - USB C
4K DOCKING STATION
i
Table of Contents
SAFETY INSTRUCTIONS .......................................... 1
COPYRIGHT ........................................................ 1
TRADEMARKS ...................................................... 1
REGULATORY COMPLIANCE .............................. 2
FCC CONDITIONS ................................................ 2
CE .................................................................... 2
WEEE INFORMATION ........................................... 2
INTRODUCTION ................................................ 3
FEATURES ........................................................... 4
PACKAGE CONTENTS ............................................ 5
SYSTEM REQUIREMENTS ....................................... 5
PRODUCT OVERVIEW ....................................... 6
CONNECTION .................................................... 8
DISPLAY CONFIGURATION ................................ 9
MULTI-MONITOR CONFIGURATION .......................... 9
EXTEND MODE .................................................. 10
MIRROR MODE ................................................. 11
SET THE PRIMARY MONITOR ................................. 12
ii
SST MODE ....................................................... 12
MST MODE ...................................................... 12
AUDIO CONFIGURATION ................................. 13
SPECIFICATION ................................................ 14
1
Before attempting to connect, operate or adjust this product,
please save and read the User's Manual completely. The style
of the product shown in this User's Manual may be different
from the actual unit due to various models.
Safety Instructions
Always read the safety instructions carefully:
Keep this User’s Manual for future reference
Keep this equipment away from humidity
If any of the following situation arises, get the
equipment checked by a service technician:
-The equipment has been exposed to moisture.
-The equipment has been dropped and damaged.
-The equipment has obvious sign of breakage.
-The equipment has not been working well or
cannot get it to work according to the User’s
Manual.
Copyright
This document contains proprietary information
protected by copyright. All right are reserved. No part of
this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior
written permission of the manufacturer.
Trademarks
All trademarks and registered trademarks are the
property of their respective owners or companies.
2
Regulatory Compliance
FCC Conditions
This equipment has been tested and found to comply
with Part 15 Class B of the FCC Rules. Operation is
subject to the following two conditions: (1) This device
may not cause harmful interference. (2) This device
must accept any interference received and include
interference that may cause undesired operation.
CE
This equipment is in compliance with the requirements
of the following regulations: EN 55 022: CLASS B
WEEE Information
For EU (European Union) member users: According to the
WEEE (Waste electrical and electronic equipment)
Directive, do not dispose of this product as household
waste or commercial waste. Waste electrical and electronic
equipment should be appropriately collected and recycled
as required by practices established for your country. For
information on recycling of this product, please contact
your local authorities, your household waste disposal
service or the shop where you purchased the product.
3
Introduction
The New OSDOCK USBC - USB C 4K DOCKING STATION
is designed for extra connectivity demands and supports
DP 1.4 output. With the Docking station, you can
extend the connection of a computer to more USB
peripherals, Ethernet network, the speaker and the
microphone via USB-C interface. Feel free to plug in upside
down for USB-C plug is reversible. Adopting PD Charging
technology, upstream charging function through USB-C
interface, you can charge the host up to 85W with
higher than 100Watts power adapter or automatically adjust
to lower charging power with smaller power adapter. With
the built-in USB 3.1 ports, the docking station enables you to
enjoy the super speed data transmission between USB
peripherals.
Incorporates technology.
4
Features
USB-C Input
–USB-C 3.1 Gen 2 port
–Upstream PD powered, supports up to 85W
–Supports VESA USB Type-C DisplayPort Alt mode
Downstream Output
–2 x USB-A 3.1 Gen 1 ports (5V/0.9A)
–1 x USB-A 3.1 Gen 2 port with BC 1.2 CDP
( 5V/1.5A ) and DCP and Apple Charge 2.4A
Video output
–DP1.4++ x 2 and HDMI2.0 x1
–DP1.2 HBR2 : 1x 4K30, 2x FHD60, 3x FHD30
–DP1.4 HBR3 : 1x 4K60, 2x QHD60, 3x FHD60
–DP1.4 HBR3 DSC : 1x 5K60, 2x 4K60, 3x 4K30
Supports audio 2.1 channel
Supports Gigabit Ethernet
5
Package Contents
OSDOCK USBC - USB C 4K DOCKING STATION
USB-C Cable
Power Adapter
User’s Manual
System Requirements
Windows 10
Mac OS ( Mirror mode only )
6
Product Overview
Front
Item
Description
1. Power Button
Switch to power on/off
2. Combo Audio Jack
Connect to a headset
3. USB-C Port
Connect to USB-C devices
4. USB-A Port
Connect to USB-A devices with BC 1.2
charging
5. K-Lock
Secure your device safety
1
2
3
4
5
7
Rear
Item
Description
5. Power jack Connect to the power adapter
6. USB-C Port
Connect to the USB-C port of a
computer
7. DP connector(x2)
Connect to a DP monitor
8. HDMI connector Connect to an monitor
9. RJ45 port Connect to an Ethernet
10. USB 3.1 Port (x2) Connect to USB devices
5
6
9
8
7
10
8
Connection
To connect the USB peripherals, Ethernet, speaker and
microphone, follow the illustrations below to connect
the corresponding connectors.
9
Display configuration
NOTE: The screenshots might vary slightly with the
operating system.
Multi-monitor configuration
Once the extra monitors are connected, they can be
configured to either Mirror mode, Extend mode or set
the primary display.
Position the mouse anywhere on the Windows Desktop,
Right-click and select Screen Resolution.
10
Extend mode
1. Refer to the Multi-monitor configuration section to
bring up the configuration window.
2. In the Display drop-down menu, select the preferred
monitor.
3. Select Multiple Displays > Extend these displays.
4. Click OK to confirm and exit.
5.Once the setting is completed, simply drag and drop
the application icons or the opened windows to the
add-on monitor. However, some applications may
not support to display on the extended desktop.
NOTE: If the system only supports SST mode, the external
monitors connected will be considered to be the
same output.
2
3
4
11
6. Troubleshooting
a. Cursor disappeared
If the status remains in the extended mode but
the docking station is disconnected, the desktop
will still be panned to the add-on monitor. The
cursor may not be found on the primary monitor
in such a case. If it happens, connect the add-on
monitor through the docking station again or
keep moving the mouse.
b. Video playback in extended mode
If the video or DVD playback quality is poor or
low performance in extended mode, please
playback it on the primary monitor instead of the
add-on monitor.
Mirror mode
1. Refer to the Multi-monitor configuration section to
bring up the configuration window.
2. In the Display drop-down menu, select the preferred
monitor.
3. Select Multiple Displays > Duplicate these displays.
4. Click OK to confirm and exit.
12
Set the primary monitor
1. Refer to the Multi-monitor configuration section to
bring up the configuration window.
2. In the Display drop-down menu, select the preferred
monitor.
3. Check the box of Make this my main display.
NOTE: For some computers, you may need to disable the
main display by unchecking the box of Extend the
desktop onto this monitor or Extend my Windows
desktop onto this monitor.
4.Click OK to confirm and exit.
SST mode
If the system only supports SST mode, the external
monitors connected will be considered to be the same
output.
MST mode
When using MST mode to connect external monitors,
you can use Mirror mode, Extend mode or set the
primary display.
13
Audio configuration
By default, when the docking station is connected to a
computer, the audio configuration may be changed to
USB (Multimedia) Audio Device automatically (this
setting depends on models). If it does not work, follow
the steps below to setup.
1. Open Control Panel and then select the hardware
and sound icon.
2. Click Sound > Manage audio devices and then select
USB Audio Device.
14
Specification
User
Interface
Upstream
USB-C female connector
Downstream
DP female connector x2
female connector x1
USB 3.1 female connector x4
(3A1C), one port supports BC
1.2/CDP
RJ45 connector x1
Combo Audio Jack (IN/OUT) x1
Video
Resolution
Single display, either one
–DP: 3840x2160@30Hz
–: 3840x2160@30Hz
Triple display
– 1920x1200@60Hz
Audio
Channel
2.1 CH
Ethernet
Type
10/100/1000 BASE-T
Power Power Mode Self-powered
Power
Adapter
Input: AC 100-240V
Output: DC 20V/5A
Working
Environment
Operation
Temperature
0~40 degree
Storage
Temperature
-20~70 degree
Compliance CE, FCC
OSDOCK USBC - USB C
4K DOCKING STATION
User's Manual
V1.0