Peerless ACC-DTRSK User Manual
Displayed below is the user manual for ACC-DTRSK by Peerless which is a product in the Signage Displays category. This manual has pages.
Related Manuals
12014-12-12 #:150-9043-4 (2016-09-22)
ACC-DTLSK, ACC-DTRSK
Fully assembled sidekick shown
2 of 6 12014-12-12 #:150-9043-4 (2016-09-22)
NOTE: Read entire instruction sheet before you start installation and assembly.
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, has experience with basic building
construction, and fully understands these instructions.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
WARNING
Tools Needed for Assembly
• 1/2" socket
• Ratchet
• 3/4" combination wrench
• 3/4" "stubby" combination ratchet wrench
3 of 6 12014-12-12 #:150-9043-4 (2016-09-22)
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly different than illustrated.
Parts List Part #
ACC-DTLSK Part #
ACC-DTRSKDescription Qty
Asidekick 1 150-T1294 150-T1296
Bgusset 2 150-T1304 150-T1304
C5/16" - 18 nut 6 530-0090 530-0090
D5/16" sealing washer 6 540-0663 540-0663
B (2)
gusset
A (1)
sidekick C (6
5/16" nut D (6)
5/16" washer
4 of 6 12014-12-12 #:150-9043-4 (2016-09-22)
1Install sidekick (A)
Remove the (4) ½” bolts and (4) ½” sealing washers from the side of the existing cabinet. Place the sidekick against the
cabinet side, line up all (4) holes and bolt together using the existing (4) ½” bolts and (4) ½”sealing washers. Use the ¾”
combination wrench on the outside of the cabinet and use the ¾” stubby combination ratchet wrench on the inside of the
cabinet. See Illustration “A”.
Illustration "A"
5 of 6 12014-12-12 #:150-9043-4 (2016-09-22)
2Install sidekick gussets (B)
Install the (2) sidekick gussets by starting from either the top or bottom ends. Push the back of the sidekick forward to
make room for the slots in the gusset. Slide the gusset over the (3) 5/16” threaded studs mounted on the sidekick and
loosely secure using 5/16” nuts and washers (see illustration “B”). Once both gussets are in place tighten the 5/16” nuts
securely using the ½” socket and ratchet. See Illustrations “B” and “C”.
Illustration "B"
Illustration "C"
The installation is complete. Repeat these instructions to install the opposite
sidekick if applicable.
Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2016, Peerless Industries, Inc.
Peerless-AV de Mexico
Ave de las Industrias 413
Parque Industrial Escobedo
Escobedo N.L Mexico 66050
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2016, Peerless Industries, Inc.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Email: tech@peerlessmounts.com
Ph: (800) 865-2112
Fax: (800) 359-6500
www.peerless-av.com
© 2016, Peerless Industries, Inc.