Peerless ACC517 User Manual
Displayed below is the user manual for ACC517 by Peerless which is a product in the Mounting Kits category. This manual has pages.
Related Manuals
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 10-30-15 SHEET #: 126-9087-1
Installation and Assembly:
DVD/VCR Mount Connector
Model: MIS517
NOTE: Read entire instruction sheet before you start installation and assembly.
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-729-0307.
• This product should only be installed by a qualified professional.
• Make sure that the wall will safely support the combined load of the equipment and all attached hardware and compo-
nents.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly , but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
WARNING
ACC517
2 of 3 ISSUED: 10-30-15 SHEET #: 126-9087-1
1Attach hook bracket (not included) and hanging bracket (C) to screen with four M4 x 12 mm phillips screws (F) and
#8 SAE flat washers (G).
Parts may appear slightly different than illustrated.
AB
CD
E
FGH
C
F
G
SCREEN
HOOK BRACKET
(NOT INCLUDED)
tQnoitpircseD
y
. Part #
A
2551-1022tekcarblacitrev
B1551-1021yarttnuomtekcarb
C4551-1021tekcarbgnignah
DM5 x 8 mm phillips screw 4570-0005
EM4 x 8 mm phillips screw 8520-1237
FM4 x 12 mm phillips screw 4504-9013
G#8 SAE flat washer 4540-1001
Hcable tie 6560-9711
Parts List
Before you begin, make sure all parts shown are included with your
product.
3 of 3 ISSUED: 10-30-15 SHEET #: 126-9087-1
2 3
Attach two vertical brackets (A) to hanging bracket (C)
with four M4 x 8 mm phillips screws (E). Attach bracket mount tray (B) to vertical brackets (A)
with four M4 x 8 mm phillips screws (E).
A
E
B
C
A
E
Attach VCR mount (not included) to bracket mount tray (B) with four M5 x 8 mm phillips screws (D). Use cable
ties (H) for cord management once screen is attached to mount.
NOTE: Follow main instruction sheet to attach screen to mount.
4
VCR MOUNT
(NOT INCLUDED)
B
D