Peerless DS-C555-4X3 User Manual
Displayed below is the user manual for DS-C555-4X3 by Peerless which is a product in the Multimedia Carts & Stands category. This manual has pages.
Related Manuals
12015-06-24 #:009-9118-6 (2019-09-04)
ENG
DS-C555-4X3
46" - 55"
(117 - 140 cm)
1200 lb
(545 kg)
MAX
22015-06-24 #:009-9118-6 (2019-09-04)
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
+1/2
4
3
Symbols
ENG
WARNING
ENG
Display center.
ENG
x3
Screws must get at
least three full turns
and t snug.
ENG
Do not overtighten screws.
ENG
ENG - Do not begin to install product until you have read and understood the instructions and warnings
contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position
equipment. This product must be installed onto at, hard, level surface to prevent tipping. Use with heavier
displays may result in instability causing tip over resulting in death or serious injury. The cart or stand is not
axed or secured to the oor, and may therefore tip over and/or fall if screen and/or stand is shaken or hit.
Displays must be removed before moving cart. Not recommended for use in areas with heavy trac. This product
is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never
exceed the Maximum Load Capacity. Be careful not to pinch ngers when operating the mount. Death or serious
injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed
on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over on
to the child. Relocating audio and/or video equipment to furniture not specically designed to support audio and/
or video equipment may result in death or serious injury due to the furnishing collapsing or over turning onto a
child. For support please call customer care at 1-800-865-2112.
WARNING
ENG
32015-06-24 #:009-9118-6 (2019-09-04)
This page intentionally left blank.ENG
42015-06-24 #:009-9118-6 (2019-09-04)
Parts (Before beginning, make sure you have all parts shown below).
I (3)
extension
A (6)
caster
B (6)
caster support
C (9)
cover
D (3)
base leg
E (2)
horizontal leg
support
F (3)
base
support tube
G (14)
base support
H (3)
vertical leg
support
J (4)
side support
bracket
Parts List
Part #
Description Qty
Acaster, 5" swivel 6 600-0026
Bcaster support 6 145-T1799
Ccover 9 145-T1809
Dbase leg 3 145-T1767
Ehorizontal leg support 2 145-T1785
Fbase support tube 3 145-T1812
Gbase support 14 560-T1261
Hvertical leg support 3 146-T1131
Iextension 3 145-T1778
Jside support bracket 4 145-T1807
Kleft adaptor bracket 12 146-1609
Lright adaptor bracket 12 146-1608
Mvertical support bracket 6 145-T1806
Ndual cross support 6 146-T1905
Ocomputer cover 1 145-T1930
Pcomputer shelf 1 145-T1931
Qextension adaptor 3 145-T1935
Rcord bracket 6 146-T1321
Sbracket, 4x2 conguration 3 145-T1858
Tknob 6 560-1160
UM8 x 16mm socket button screw 244 520-9527
VM8 square nut 80 530-1066
Wcover clip 36 590-0317
XM5 x 10mm type-F, socket pin screw 26 520-1164
Ybar nut 34 146-1319
Z1/4" power bit 1 560-0263
AA 5mm allen wrench 1 560-9640
BB nylon shoulder washer 48 590-2233
CC M6 x 12mm socket pin screw 48 520-1050
DD 4mm allen wrench 1 560-9646
L (12)
right adaptor
bracket
K (12)
left adaptor
bracket
ENG
52015-06-24 #:009-9118-6 (2019-09-04)
O (1)
computer cover
P (1)
computer shelf
S (3)
bracket, 4x2
conguration
N (6)
dual cross
support
DD (1)
4mm allen
wrench
U (244)
M8 x 16mm
V (80)
M8 square
nut
W (36)
cover clip
X (26)
M5 x 10mm
Z (1)
1/4" power
bit
AA (1)
5mm allen
wrench
BB (48)
nylon shoulder
washer
CC (48)
M6 x 12mm
Q (3)
extension
adaptor R (6)
cord
bracket
T (6)
knob bar nut
Y (34)
M (6)
vertical support
bracket
62015-06-24 #:009-9118-6 (2019-09-04)
1-1
1-2
U (4)
A
B
U (2)
V (2)
Do not fully tighten hardware
SIDE VIEW
x6
x6
AA
AA
ENG
72015-06-24 #:009-9118-6 (2019-09-04)
2
U (4)
U (4)
F
F
V (4)
V (4)
D
V (4)
x3 AA
82015-06-24 #:009-9118-6 (2019-09-04)
3
TIGHTEN
CONNECTING
HARDWARE
Flush edges
ENG
Casters must be ush to end of horizontal leg support.
ENG
4
Y (2)
G
U (4)
SIDE VIEW
Do not fully tighten hardware
x14
x3
AA
AA
ENG
D
92015-06-24 #:009-9118-6 (2019-09-04)
x2
5-2
H
TIGHTEN
CONNECTING
HARDWARE
5-1
H
TIGHTEN
CONNECTING
HARDWARE
AA
AA
10 2015-06-24 #:009-9118-6 (2019-09-04)
6-1
6-2
U (4)
Y (2)
Q
I (3)
Q (3)
TIGHTEN
CONNECTING
HARDWARE
x3 Do not fully tighten hardware
AA
AA
ENG
TOP VIEW
11 2015-06-24 #:009-9118-6 (2019-09-04)
x6
LOCK WHEELS
AA
AA
E
E
8
U (6)
V (4)
M
1/8"
(3mm)
1/8"
(3mm)
7
TIGHTEN
CONNECTING
HARDWARE
ENG
12 2015-06-24 #:009-9118-6 (2019-09-04)
9
Use metric formula below and diagram
to the right to determine hole pattern required
for center vertical support bracket. Repeat
(x2).
All dimensions are metric.
Use the outside mounting holes when…
a x 4 > 4368mm and a x 3 + b < 4318mm
Use the inside mounting holes when…
a x 4 > 4098mm and a x 3 + b < 4064mm
U (12)
V (8)
S
V (8)
S
U (12)
BACK
SIDE
1/8"
(3mm)
b
a
BACK OF DISPLAY
x3 AA
ENG
ENG
ENG
13 2015-06-24 #:009-9118-6 (2019-09-04)
DISPLAY HEIGHT
DISPLAY HEIGHT
TIGHTEN
CONNECTING
HARDWARE
M (6)
S (3)
10
AA
14 2015-06-24 #:009-9118-6 (2019-09-04)
11-1
TIGHTEN
CONNECTING
HARDWARE
N (2)
AA
15 2015-06-24 #:009-9118-6 (2019-09-04)
11-2
TIGHTEN
CONNECTING
HARDWARE
N (2)
AA
16 2015-06-24 #:009-9118-6 (2019-09-04)
11-3
TIGHTEN
CONNECTING
HARDWARE
N (2)
AA
17 2015-06-24 #:009-9118-6 (2019-09-04)
TIGHTEN
CONNECTING
HARDWARE
12
J
U (2)
V (2)
AA
J (4)
U (8)
V (8)
18 2015-06-24 #:009-9118-6 (2019-09-04)
X
X
13-1
L
K
13-2
Center adaptor brackets
vertically on back of screen.
ENG
L
K
x3
BB CC U
OR
x12
x12
DDAA
19 2015-06-24 #:009-9118-6 (2019-09-04)
14-1
14-2
Must hang displays on bottom row rst;
Secure pin in "locked" position.
Must hang displays on middle row second;
Secure pin in "locked" position.
"LOCKED"
POSITION
"LOCKED"
POSITION
ENG
ENG
20 2015-06-24 #:009-9118-6 (2019-09-04)
14-3
Must hang displays on top row last;
Secure pin in "locked" position.
"LOCKED"
POSITION
14-4
Optional: Insert M5 x 10mm type-F socket pin screws
(X) to lock latches. DD
X
"LOCKED"
POSITION
x24
ENG
ENG
21 2015-06-24 #:009-9118-6 (2019-09-04)
IN
TILT BACKWARD
OUT
TILT RIGHT
TILT FORWARD
TILT LEFT
SIDE
SIDE
SIDE
TOP
SIDE
TOP
UP DOWN
ROTATE LEFT ROTATE RIGHT
15
Display adjustment
ENG
22 2015-06-24 #:009-9118-6 (2019-09-04)
16
R
T
TIGHTEN
CONNECTING
HARDWARE
TOP VIEW
R (6)
T (6)
Optional: Unlock wheels to move cart to desired
location; Lock wheels before hanging screens.
LOCK WHEELS
ENG
ENG
23 2015-06-24 #:009-9118-6 (2019-09-04)
17
X (24)
C (6)
24 2015-06-24 #:009-9118-6 (2019-09-04)
18
P
25 2015-06-24 #:009-9118-6 (2019-09-04)
P
X (2)
P
O
TIGHTEN
CONNECTING
HARDWARE
19-1
19-2
1/8"
(3mm)
DD
DD
26 2015-06-24 #:009-9118-6 (2019-09-04)
R
R
20
Route cables through cord brackets.
ENG
27 2015-06-24 #:009-9118-6 (2019-09-04)
21-2
Remove displays from top row rst.
21-1
Pull down on bracket cords and hold. Swing screen away from cart and lift to remove.
"UNLOCKED"
POSITION
ENG ENG
ENG
Display removal
ENG
28 2015-06-24 #:009-9118-6 (2019-09-04)
21-3
Remove displays from middle row second.
21-4
Remove displays from bottom row last.
"UNLOCKED"
POSITION
"UNLOCKED"
POSITION
ENG
ENG
29 2015-06-24 #:009-9118-6 (2019-09-04)
This page intentionally left blank.
ENG
30 2015-06-24 #:009-9118-6 (2019-09-04)
This page intentionally left blank.
ENG
31 2015-06-24 #:009-9118-6 (2019-09-04)
This page intentionally left blank.
ENG
Peerless Industries, Inc. (“Peerless-AV”) warrants to original end-users that each Peerless-AV® mounting product will be free from defects
in material and workmanship, under normal use, for the applicable warranty period (from date of the original installation of the product).
At its option, Peerless-AV will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
Any implied warranty of merchantability or tness for a particular purpose shall be limited to the period of the
express warranty set forth below.
In no event shall Peerless-AV be liable for incidental or consequential damages, whether or not secured by a
security device which may be included with the product.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of incidental or consequential damages, so
the above limitation and/or the above exclusion may not apply to you.
This warranty does not cover damage caused by incorrect selection, installation or the failure to follow Peerless-AV instructions or
warnings when installing, using or storing the product.
This warranty gives specic legal rights, and you may also have other rights which vary from state to state. To make a warranty claim in
North America, contact Peerless-AV customer care at 1-800-865-2112. See complete global warranty information for regions outside North
America at www.peerless-av.com/en-uk/customer-care/warranties-returns.
LIMITED FIVE-YEAR WARRANTY
Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2019, Peerless Industries, Inc.
Peerless-AV de Mexico
Ave de las Industrias 413
Parque Industrial Escobedo
Escobedo N.L Mexico 66062
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2019, Peerless Industries, Inc.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Email: tech@peerlessmounts.com
Ph: (800) 865-2112
Fax: (800) 359-6500
www.peerless-av.com
© 2019, Peerless Industries, Inc.