Peerless DS-C560-2X2 User Manual
Displayed below is the user manual for DS-C560-2X2 by Peerless which is a product in the Multimedia Carts & Stands category. This manual has pages.
Related Manuals
12014-04-14 #:009-9082-12 (2019-09-04)
ENG
DS-C560-2X2
46" - 60"
(117 - 152 cm)
500 lb
(227 kg)
MAX
22014-04-14 #:009-9082-12 (2019-09-04)
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
+1/2
4
3
Symbols
ENG
WARNING
ENG
ENG
Display center.
ENG
x3
Screws must get at
least three full turns
and t snug.
ENG
Do not overtighten screws.
ENG
ENG - Do not begin to install product until you have read and understood the instructions and warnings
contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position
equipment. This product must be installed onto at, hard, level surface to prevent tipping. Use with heavier
displays may result in instability causing tip over resulting in death or serious injury. The cart or stand is not
axed or secured to the oor, and may therefore tip over and/or fall if screen and/or stand is shaken or hit.
Displays must be removed before moving cart. Not recommended for use in areas with heavy trac. This product
is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never
exceed the Maximum Load Capacity. Be careful not to pinch ngers when operating the mount. Death or serious
injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed
on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over on
to the child. Relocating audio and/or video equipment to furniture not specically designed to support audio and/
or video equipment may result in death or serious injury due to the furnishing collapsing or over turning onto a
child. For support please call customer care at 1-800-865-2112.
WARNING
32014-04-14 #:009-9082-12 (2019-09-04)
Parts List
Part #Description Qty
Acaster, 5" swivel 4 600-0026
Bcaster support 4 145-T1799
Ccover 6 145-T1809
Dbase leg 2 145-T1767
Ehorizontal leg support 1 145-T1785
Fbase support tube 2 145-T1812
Gbase support 8 560-T1261
Hvertical leg support 2 146-T1131
Ileft adaptor bracket 4 146-1609
Jright adaptor bracket 4 146-1608
Kvertical support bracket 4 145-T1806
Lcomputer cover 1 145-T1930
Mcomputer shelf 1 145-T1931
Ndual rail assembly 2 146-T1905
Ocord bracket 4 146-T1321
Pknurled knob 4 560-1160
QM8 x 16mm socket button screw 104 520-9527
RM8 square nut 32 530-1066
Scover clip 24 590-0317
TM5 x 10mm type-f, socket pin screw 10 520-1164
Ubar nut 16 146-1319
V1/4" power bit 1 560-0263
W5mm allen wrench 1 560-9640
Xnylon shoulder washer 16 590-2233
YM6 x 12mm socket pin screw 16 520-1050
Z4mm allen wrench 1 560-9646
Parts (Before beginning, make sure you have all parts shown below).
D (2)
base leg
A (4)
caster
B (4)
caster support
C (6)
cover
E (1)
horizontal leg
support
F (2)
base support
tube
G (8)
base support
H (2)
vertical leg
support
K (4)
vertical support
bracket
J (4)
right adaptor
bracket
I (4)
left adaptor
bracket
ENG
42014-04-14 #:009-9082-12 (2019-09-04)
L (1)
computer cover
N (2)
dual rail
assembly
Q (104)
M8 x 16mm
R (32)
M8 square nut
S (24)
cover clip
T (10)
M5 x 10mm
V (1)
1/4" power
bit
W (1)
5mm allen
wrench
nylon shoulder
washer
X (16)
M6 x 12mm
Y (16)
4mm allen
wrench
Z (1)
M (1)
computer shelf
O (4)
cord
bracket
P (4)
knurled
knob
bar nut
U (16)
52014-04-14 #:009-9082-12 (2019-09-04)
1-1
Q (4)
A
B
Q (2)
R (2)
Do not fully tighten hardware
SIDE VIEW
x4
1-2
x4
W
W
ENG
62014-04-14 #:009-9082-12 (2019-09-04)
2
Q (4)
Q (4)
F
F
R (4)
R (4)
D
R (4)
x2 W
72014-04-14 #:009-9082-12 (2019-09-04)
D
4
SIDE VIEW
Do not fully tighten hardware
Casters must be ush to end of horizontal leg support.
ENG
x8 U (2)
G
Q (4)
3
TIGHTEN
CONNECTING
HARDWARE
Flush edges
ENG
x2
W
W
ENG
82014-04-14 #:009-9082-12 (2019-09-04)
5
H
6
TIGHTEN
CONNECTING
HARDWARE
TIGHTEN
CONNECTING
HARDWARE
E
x2
LOCK WHEELS
W
W
ENG
92014-04-14 #:009-9082-12 (2019-09-04)
7-1
7-2
DISPLAY HEIGHT
K (4)
Q (6)
R (4)
K
1/8"
(3mm)
1/8"
(3mm)
x4
W
W
TIGHTEN
CONNECTING
HARDWARE
10 2014-04-14 #:009-9082-12 (2019-09-04)
8
N
Cross supports must center on vertical leg supports.
TIGHTEN
CONNECTING
HARDWARE
W
Tighten.
ENG Tighten.
ENG
ENG
11 2014-04-14 #:009-9082-12 (2019-09-04)
9
TIGHTEN
CONNECTING
HARDWARE
N
Cross supports must center on vertical leg supports.
Tighten.
ENG Tighten.
ENG
W
ENG
12 2014-04-14 #:009-9082-12 (2019-09-04)
10
O
P
TIGHTEN
CONNECTING
HARDWARE
TOP VIEW
Optional: Unlock wheels to move cart to desired
location; Lock wheels before hanging screens.
LOCK WHEELS
O (4)
P (4)
ENG
ENG
13 2014-04-14 #:009-9082-12 (2019-09-04)
Z
X
X
11-1
J
I
11-2
Center adaptor brackets
vertically on back of screen.
ENG
J
I
x3
X Y Q
OR
x4
x4
W
14 2014-04-14 #:009-9082-12 (2019-09-04)
12-1
Must hang displays on top row second; Secure pin
in "locked" position.
12-2
Optional: Insert M5 x 10mm type-F socket pin screws
(T) to lock latches.
Z
T
"LOCKED"
POSITION
"LOCKED"
POSITION
x8
ENG
ENG
15 2014-04-14 #:009-9082-12 (2019-09-04)
IN
TILT BACKWARD
OUT
TILT RIGHT
TILT FORWARD
TILT LEFT
SIDE
SIDE
SIDE
TOP
SIDE
TOP
UP DOWN
ROTATE LEFT ROTATE RIGHT
13
Display adjustment
ENG
16 2014-04-14 #:009-9082-12 (2019-09-04)
14
M
17 2014-04-14 #:009-9082-12 (2019-09-04)
M
T (2)
M
L
TIGHTEN
CONNECTING
HARDWARE
15-1
15-2
1/8"
(3mm)
Z
Z
18 2014-04-14 #:009-9082-12 (2019-09-04)
16 S (24)
C (6)
19 2014-04-14 #:009-9082-12 (2019-09-04)
17
Route cables through cord brackets.
O
O
ENG
18-2
Remove displays from top row rst.
"UNLOCKED"
POSITION
Pull down on bracket cords and hold. Swing screen away from cart and lift to remove.
ENG ENG
ENG
18-1
Display removal
ENG
This page intentionally left blank.
ENG
This page intentionally left blank.
ENG
This page intentionally left blank.
ENG
Peerless Industries, Inc. (“Peerless-AV”) warrants to original end-users that each Peerless-AV® mounting product will be free from defects
in material and workmanship, under normal use, for the applicable warranty period (from date of the original installation of the product).
At its option, Peerless-AV will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
Any implied warranty of merchantability or tness for a particular purpose shall be limited to the period of the
express warranty set forth below.
In no event shall Peerless-AV be liable for incidental or consequential damages, whether or not secured by a
security device which may be included with the product.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of incidental or consequential damages, so
the above limitation and/or the above exclusion may not apply to you.
This warranty does not cover damage caused by incorrect selection, installation or the failure to follow Peerless-AV instructions or
warnings when installing, using or storing the product.
This warranty gives specic legal rights, and you may also have other rights which vary from state to state. To make a warranty claim in
North America, contact Peerless-AV customer care at 1-800-865-2112. See complete global warranty information for regions outside North
America at www.peerless-av.com/en-uk/customer-care/warranties-returns.
LIMITED FIVE-YEAR WARRANTY
Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2019, Peerless Industries, Inc.
Peerless-AV de Mexico
Ave de las Industrias 413
Parque Industrial Escobedo
Escobedo N.L Mexico 66062
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2019, Peerless Industries, Inc.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Email: tech@peerlessmounts.com
Ph: (800) 865-2112
Fax: (800) 359-6500
www.peerless-av.com
© 2019, Peerless Industries, Inc.