Peerless DS-LEDLSCB-8X8 User Manual
Displayed below is the user manual for DS-LEDLSCB-8X8 by Peerless which is a product in the Signage Display Mounts category. This manual has pages.
Related Manuals
12021-03-31 #:146-9063-1
DS-LEDLSCB Series
For LG LSCB
*Actual conguration may vary
ENG Installation video for reference only.
Read and follow instruction manual for full installation.
22021-03-31 #:146-9063-1
Symbols
ENG
WARNING
ENG
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
5/32"
(4mm)
3/8"
(10mm)
#
Skip to step.
ENG
Wear anti-static gloves.
ENG
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
4
+1/2
3
ENG - This product is designed to be installed on plywood walls. Hardware is included for plywood installation.
walls. Before installing make sure the supporting surface will support the combined load of the equipment and
hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.
Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift
and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to
call customer care at 1-800-865-2112.
WARNING
2.5mm
32021-03-31 #:146-9063-1
Parts List
Description
Aleft column
Bright column
Cinside column
Dtop left horizontal asy
Etop right horizontal asy
Fbottom left horizontal asy
Gbottom right horizontal asy
Hvertical spacer
Ihorizontal spacer
JM5 square nut (spare)
K3mm allen wrench two-tip T-handle
Lwall plate shim
Mconnector plate
NM5 x 5mm set screw
OM5 x 8mm socket screw
P#14 x 1.75" wood screw
Q2.5mm allen wrench
A
B
C
left column
right column
inside column
D
E
F
G
top left horizontal assembly
top right horizontal assembly
bottom left horizontal assembly
bottom right horizontal assembly
Parts (Before beginning, make sure you have all parts shown below).
Refer to parts list included with your model.
ENG
42021-03-31 #:146-9063-1
N
P
O
J
M5 x 5mm
set screw
#14 x 1.75" wood screw
M5 x 8mm
M5 square nut
L
HI
wall plate
shim
vertical
spacer horizontal
spacer
M
connector
plate
K
3mm allen wrench
two-tip T-handle
Q
2.5mm allen wrench
52021-03-31 #:146-9063-1
This page intentionally left blank.
ENG
62021-03-31 #:146-9063-1
1-1
Optional: If connecting two top horizontal extrusions,
ENG
Remove and save hardware.
ENG
D
E
1-2
Use extrusion connectors to connect top horizontal
extrusions.
ENG
M (4) N (8)
K
E
D
Q
72021-03-31 #:146-9063-1
1-3
Replace one hook-on bracket in between connected
extrusions.
ENG
Use saved hardware.
ENG
K
E
D
1-4
568mm 568mm
ENG
ESP
DEU
Adjust.
Ajuste.
Réglez.
Einstellen.
1 2 3
Loosen.
Desserrez.
Lösen.
ENG
ESP
DEU
ENG
ESP
DEU
Tighten.
Apriete.
Puis serrez.
Anziehen.
DE
82021-03-31 #:146-9063-1
2-1
Optional: If connecting two bottom horizontal
ENG
Remove and save hardware.
ENG G
F
K
2-2
Use extrusion connectors to connect bottom
horizontal extrusions.
ENG
N (6)
M (3)
F
G
Q
92021-03-31 #:146-9063-1
F
G
2-3
Replace one hook-on bracket in between connected
extrusions.
ENG
Use saved hardware.
ENG
K
2-4
F G
1 2 3
Loosen.
Desserrez.
Lösen.
ENG
ESP
DEU
ENG
ESP
DEU
Adjust.
Ajuste.
Réglez.
Einstellen.
ENG
ESP
DEU
Tighten.
Apriete.
Puis serrez.
Anziehen.
568mm 568mm
10 2021-03-31 #:146-9063-1
3
ENG - When installing Peerless wall mounts on a wood stud wall covered with plywood, verify that the wood
studs are a minimum of 2" x 4" nominal size and plywood is a minimum Grade BC, 1/2" (13 mm) thick. Plywood
may be covered by gypsum board (drywall) up to 5/8" thick.
WARNING
3-1
ENG When installing more than one display to a wood stud wall reinforced with plywood (minimum Grade BC, 1/2"
thick) that may be covered in gypsum board (drywall) up to 5/8" thick, the mounting surface must be plumb
(+/- .25”) across the height of the video wall and straight (+/- .25”) across the width of the video wall.
11 2021-03-31 #:146-9063-1
3-2
Use a laser level to keep mounting holes
level.
ENG
3.0"
(76mm)
display tile
7/8"(22mm) minimum
for mounting clearance
12 2021-03-31 #:146-9063-1
3-3
Level top horizontal extrusion and mark
mounting holes on plywood (must be
minimum Grade BC, 1/2" (13mm) thick.)
ENG
D,E
13 2021-03-31 #:146-9063-1
3-5
Level extrusion. Install using wood screws
provided.
ENG
3/8"
(10mm)
Maximum 80 in. • lb (9 N.M.).
ENG
3-4
Drill mounting holes into supporting surface
(1.75" (44mm) minimum depth required).
ENG
5/32"
(4mm)
1.75"
(44mm)
5/32"
(4mm)
D,E
P
14 2021-03-31 #:146-9063-1
3-6
horizontal extrusion.
ENG
3/8"
(10mm)
ENG
P
H
H
H
D
15 2021-03-31 #:146-9063-1
3-7
Use third vertical spacer to align bottom
then mark mounting holes on plywood (must be
minimum Grade BC, 1/2" (13mm) thick.)
ENG
F,G
H
ENG
H
F
16 2021-03-31 #:146-9063-1
F,G
3-9
Use third vertical spacer to align bottom
spacer, then install using wood screws
provided.
ENG
3/8"
(10mm)
Maximum 80 in. • lb (9 N.M.).
ENG
P
3-8
Drill mounting holes into supporting surface
(1.75" (44mm) minimum depth required).
ENG
5/32"
(4mm)
1.75"
(44mm)
5/32"
(4mm)
17 2021-03-31 #:146-9063-1
4
Remove vertical spacers.
ENG
3/8"
(10mm)
H
18 2021-03-31 #:146-9063-1
5-1
Hook on and secure outer columns.
ENG
B
A
Tighten hardware.
ENG
K
O
19 2021-03-31 #:146-9063-1
5-2
Hook on and secure all inside columns.
ENG
C
K
Tighten hardware.
ENG
O
20 2021-03-31 #:146-9063-1
6-1
Loosen hardware on columns.
ENG K
21 2021-03-31 #:146-9063-1
6-2
Plumb and level outer columns, then tighten
hardware. Tighten hardware on four corner wall
plates.
ENG
Tighten.
ENG
Tighten.
ENG
K
22 2021-03-31 #:146-9063-1
6-3
Tie a string between top slots on outer
columns in order to level the depth of each.
ENG
Loosen, adjust, tighten.
ENG
K
Tighten.
ENG
Loosen.
ENG
Optional leveling for bowed walls
ENG
Insert.
ENG
L
23 2021-03-31 #:146-9063-1
6-4
Tie a string between bottom slots on outer columns
in order to level the depth of each.
ENG
Loosen, adjust, tighten.
ENG
K
Tighten.
ENG
Loosen.
ENG
Optional leveling for bowed walls
ENG
Insert.
ENG
L
24 2021-03-31 #:146-9063-1
6-5
With the string still attached, level the height of
each column.
ENG
Tighten or loosen to adjust height.
ENG
K
25 2021-03-31 #:146-9063-1
6-6
Tighten column hardware after spacing. Start
from the left column.
ENG
I
K
26 2021-03-31 #:146-9063-1
6-7
spacers until all are level. Tighten column hardware
after spacing.
ENG
I
K
27 2021-03-31 #:146-9063-1
6-8
Remove all spacers.
ENG
G
28 2021-03-31 #:146-9063-1
7
ENG K
wall
display tile
2.42"
(62mm)
MAX
2.15"
(55mm)
MIN
display tile
wall
2.63"
(67mm)
MIN
2.90"
(74mm)
MAX
29 2021-03-31 #:146-9063-1
8-1
Level L brackets and mark mounting holes on
plywood (must be minimum Grade BC, 1/2"
(13mm) thick.)
ENG
8-2
Drill mounting holes into supporting surface
(1.75" (44mm) minimum depth required).
ENG
5/32"
(4mm)
1.75"
(44mm)
5/32"
(4mm)
30 2021-03-31 #:146-9063-1
8-3
Level L brackets. Install using wood
screws provided.
ENG
3/8"
(10mm)
Maximum 80 in. • lb (9 N.M.).
ENG
P
31 2021-03-31 #:146-9063-1
8-4
Tie a string between center slots on outer
columns in order to level the depth of each.
ENG K
32 2021-03-31 #:146-9063-1
8-5
Adjust depth, then remove string.
ENG
Loosen, adjust, tighten.
ENG
K
33 2021-03-31 #:146-9063-1
9-1
ENG Attach display, tighten connecting hardware, and run
cables one at a time starting from the bottom left.
24
135678
34 2021-03-31 #:146-9063-1
9-2
10
18
26
34
42
50
58
11
19
27
35
43
51
59
12
20
28
36
44
52
60
13
21
29
37
45
53
61
14
22
30
38
46
54
62
15
23
31
39
47
55
63
16
24
32
40
48
64
9
17
25
33
41
49
57
35 2021-03-31 #:146-9063-1
10
ENG To remove, start from the top right.
32
4
1
5
6
7
8
Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2021, Peerless Industries, Inc.
Peerless-AV América Latina
Av. de las Industrias 413
Parque Industrial Escobedo
General Escobedo N.L., México 66062
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2021, Peerless Industries, Inc.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Email: tech@peerlessmounts.com
Ph: (800) 865-2112
www.peerless-av.com
© 2021, Peerless Industries, Inc.
www.peerless-av.com/warranty
Warranty Garantía Garantie Garantie Garantie
Garanzia Záruka Záruka Garantia
ENG ESP DEU NEL
ITL SLK POR TÜR