Peerless DS-S555-3X3 User Manual
Displayed below is the user manual for DS-S555-3X3 by Peerless which is a product in the Multimedia Carts & Stands category. This manual has pages.
Related Manuals
12014-07-30 #:009-9089-7 (2020-01-14)
ENG
DS-S555-3X3
46" - 55"
(117 - 140 cm)
900 lb
(409 kg)
MAX
22014-07-30 #:009-9089-7 (2020-01-14)
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
+1/2
4
3
Symbols
ENG
WARNING
ENG
x3
Screws must get at
least three full turns
and t snug.
ENG
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
Display center.
ENG
3/8"
(10mm)
3/8"
(10mm)
ENG - This product is designed to be installed on solid concrete. Hardware is included for solid concrete
installation. Before installing make sure the supporting surface will support the combined load of the equipment
and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product
may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to
safely lift and position equipment. This product is intended for indoor use only. Use of this product outdoors could
lead to product failure or personal injury. Be careful not to pinch ngers when operating the mount. For support
please call customer care at 1-800-865-2112.
WARNING
ENG
32014-07-30 #:009-9089-7 (2020-01-14)
This page intentionally left blank.ENG
42014-07-30 #:009-9089-7 (2020-01-14)
Parts (Before beginning, make sure you have all parts shown below).
Parts List
Part #
Description Qty
Apedestal 2 147-T1426
Bcolumn 2 146-T1131
Cextension 2 145-T1778
Dcover 2 145-T1809
Eside support bracket 4 145-T1807
Fvertical support bracket 6 145-T1806
Gleft adaptor bracket 9 146-1609
Hright adaptor bracket 9 146-1608
Icomputer cover 1 145-T1930
Jcomputer shelf 1 145-T1931
Kdual cross support 3 146-T1905
Lextension adaptor 2 145-T1935
Mcord bracket 4 146-T1321
Nknurled knob 4 560-1160
Ocross support 3 146-T1904
Pplate connections 6 145-T1821
QM8 x 16mm socket button screw 112 520-9527
RM8 square nut 50 530-1066
Scover clip 8 590-0317
TM5 x 10mm type-F, socket pin screw 20 520-1164
Ubar nut 4 146-1319
V1/4" power bit 1 560-0263
W5mm allen wrench 1 560-9640
Xnylon shoulder washer 36 590-2233
YM6 x 12mm socket pin screw 36 520-1050
Z4mm allen wrench 1 560-9646
AA M6 x 35mm screw 8 520-0717
BB rawl bolt #6913 8 5M9-381-H03
CC M8 x 20mm screw 6 520-1754
D (2)
cover
B (2)
column
F (6)
vertical support
bracket
E (4)
side support
bracket
C (2)
extension
A (2)
pedestal H (9)
right adaptor
bracket
G (9)
left adaptor
bracket
ENG
52014-07-30 #:009-9089-7 (2020-01-14)
O (3)
cross support
Z (1)
4mm allen
wrench
I (1)
computer cover
Q (112)
M8 x 16mm
R (50)
M8 square
nut
S (8)
cover clip
T (20)
M5 x 10mm
V (1)
1/4" power
bit
W (1)
5mm allen
wrench
X (36)
nylon shoulder
washer
Y (36)
M6 x 12mm
P (6)
plate
connections
L (2)
extension
adaptor
J (1)
computer shelf
rawl bolt
BB (8)
M6 x 35mm
AA (8)
K (3)
dual cross
support
M (4)
cord
bracket
N (4)
knurled
knob
bar nut
U (4)
CC (6)
M8 x 20mm
62014-07-30 #:009-9089-7 (2020-01-14)
2
1
x2
x2
AA (4)
A
B
TOP VIEW
L
Q (4)
U (2)
Do not fully tighten hardware
W
72014-07-30 #:009-9089-7 (2020-01-14)
3
x2
TIGHTEN
CONNECTING
HARDWARE
C
B
L
W
82014-07-30 #:009-9089-7 (2020-01-14)
1/8"
(3mm) 1/8"
(3mm)
TIGHTEN
CONNECTING
HARDWARE
DISPLAY HEIGHT
DISPLAY HEIGHT
Q (6)
R (4)
F
4
5
x6
x2
W
W
F (3)
92014-07-30 #:009-9089-7 (2020-01-14)
TOP VIEW
S (4)
Dx2
6-2
M (2)
N (2)
6-1
x2
TIGHTEN
CONNECTING
HARDWARE
MN
10 2014-07-30 #:009-9089-7 (2020-01-14)
7
ENG - When installing Peerless mounts on a concrete oor, the oor must be at least 8" thick with a minimum
compressive strength of 2000 psi. Never attach concrete expansion anchors to concrete covered with plaster,
drywall, or other nishing material.
WARNING
11 2014-07-30 #:009-9089-7 (2020-01-14)
BB (8)
47-1
Align base. Mark mounting holes.
ENG
7-2
Drill mounting holes into
supporting surface
(3" (76mm) minimum
depth required).
ENG
3/8"
(10mm)
7-3
Align base. Install using concrete anchors
provided.
ENG
3/8"
(10mm)
55.00"
(1397mm)
55.00"
(1397mm)
ENG Maximum 35 ft • lb (47 N.M.).
3"
(76mm)
3/8"
(10mm)
12 2014-07-30 #:009-9089-7 (2020-01-14)
8-1
8-2
8-3
K
O
Q (4)
Q (4)
R (4)
R (2)
CC (2)
P (2)
x3
x3
x3
W
W
W
13 2014-07-30 #:009-9089-7 (2020-01-14)
9-1
TIGHTEN
CONNECTING
HARDWARE
Cross supports must center on columns.
W
Tighten.
ENG Tighten.
ENG
ENG
14 2014-07-30 #:009-9089-7 (2020-01-14)
9-2
TIGHTEN
CONNECTING
HARDWARE
Cross supports must center on colmuns.
W
Tighten.
ENG Tighten.
ENG
ENG
15 2014-07-30 #:009-9089-7 (2020-01-14)
TIGHTEN
CONNECTING
HARDWARE
Cross supports must center on columns.
9-3
W
Tighten.
ENG Tighten.
ENG
ENG
16 2014-07-30 #:009-9089-7 (2020-01-14)
10
E
E (4)
Q (2)
Q (8)
R (2)
R (8)
W
17 2014-07-30 #:009-9089-7 (2020-01-14)
X
X
11-1
H
G
11-2
Center adaptor brackets
vertically on back of screen.
ENG
H
G
x3
X Y Q
OR
Z
x9
x9
W
18 2014-07-30 #:009-9089-7 (2020-01-14)
12-1
12-2
Must hang displays on bottom row rst. Secure pin
in "locked" position.
Must hang displays on middle row second. Secure
pin in "locked" position.
"LOCKED"
POSITION
"LOCKED"
POSITION
ENG
ENG
19 2014-07-30 #:009-9089-7 (2020-01-14)
12-3
Must hang displays on top row last. Secure pin
in "locked" position.
"LOCKED"
POSITION
12-4
Optional: Insert M5 x 10mm type-F socket pin screws
(T) to lock latches.
T
"LOCKED"
POSITION
Z
x18
ENG
ENG
20 2014-07-30 #:009-9089-7 (2020-01-14)
13
Display adjustment
IN
TILT BACKWARD
OUT
TILT RIGHT
TILT FORWARD
TILT LEFT
SIDE
SIDE
SIDE
TOP
SIDE
TOP
UP DOWN
ROTATE LEFT ROTATE RIGHT
ENG
21 2014-07-30 #:009-9089-7 (2020-01-14)
14
J
22 2014-07-30 #:009-9089-7 (2020-01-14)
J
T (2)
J
I
TIGHTEN
CONNECTING
HARDWARE
15-1
15-2
1/8"
(3mm)
Z
Z
23 2014-07-30 #:009-9089-7 (2020-01-14)
16
Route cables through cord brackets.
M
M
ENG
Peerless Industries, Inc. (“Peerless-AV”) warrants to original end-users that each Peerless-AV® mounting product will be free from defects
in material and workmanship, under normal use, for the applicable warranty period (from date of the original installation of the product).
At its option, Peerless-AV will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
Any implied warranty of merchantability or tness for a particular purpose shall be limited to the period of the
express warranty set forth below.
In no event shall Peerless-AV be liable for incidental or consequential damages, whether or not secured by a
security device which may be included with the product.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion of incidental or consequential damages, so
the above limitation and/or the above exclusion may not apply to you.
This warranty does not cover damage caused by incorrect selection, installation or the failure to follow Peerless-AV instructions or
warnings when installing, using or storing the product.
This warranty gives specic legal rights, and you may also have other rights which vary from state to state. To make a warranty claim in
North America, contact Peerless-AV customer care at 1-800-865-2112. See complete global warranty information for regions outside North
America at www.peerless-av.com/en-uk/customer-care/warranties-returns.
LIMITED FIVE-YEAR WARRANTY
Peerless-AV Europe
Unit 3 Watford Interchange,
Colonial Way, Watford, Herts,
WD24 4WP, United Kingdom
Customer Care
44 (0) 1923 200 100
www.peerless-av.com
© 2020, Peerless Industries, Inc.
Peerless-AV América Latina
Av. de las Industrias 413
Parque Industrial Escobedo
General Escobedo N.L., México 66062
Servicio al Cliente
01-800-849-65-77
www.peerless-av.com
© 2020, Peerless Industries, Inc.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Email: tech@peerlessmounts.com
Ph: (800) 865-2112
Fax: (800) 359-6500
www.peerless-av.com
© 2020, Peerless Industries, Inc.