Peerless HP432-002 User Manual
Displayed below is the user manual for HP432-002 by Peerless which is a product in the TV Mounts category. This manual has pages.
Related Manuals
Max Load Capacity: 80 lbs (36.3 kg)
Installation and Assembly:
Desktop Swivel Mount
Model: HP432-002, HP432-002-S, HP432-002-GB
ISSUED: 8-29-07 SHEET #: 124-9102-4 08-17-11
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com
2 of 5 ISSUED: 8-29-07 SHEET #: 124-9102-4 08-17-11
Note: Read entire instruction sheet before you start installation and assembly.
Table of Contents
Parts List.................................................................................................................................................................................3
Installation to Desktop ............................................................................................................................................................4
Installing Tube Assembly ........................................................................................................................................................4
Installing Screen .....................................................................................................................................................................5
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call Peerless customer care at 1-800-865-2112.
• This product should only be installed by a qualifi ed professional.
• Make sure that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
• Never exceed the Maximum Load Capacity of 80 lbs (36.3 kg).
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws fi rmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
WARNING
3 of 5 ISSUED: 8-29-07 SHEET #: 124-9102-4 08-17-11
E
F
G
H
IJK
L
M
N
B
CD
A
HP432-002 HP432-002-GB HP432-002-S
Description Qty. Part # Part # Part #
A
adapter plate 1 095-1721 095-P1721 095-4721
Badapter box 1 124-1794 124-P1794 124-4794
Cswivel tube 1 124-1792 124-P1792 124-4792
Dbase tube 1 124-1796 124-P1796 124-4796
Ebushing 2 590-1088 590-1088 590-1088
FM5 x 6 mm socket pin screw 4 520-1114 520-1114 520-2062
G1/4-20 x 1/2" socket pin screw 2 520-1054 520-1054 520-2069
HM8 x 25 mm socket pin screw 2 520-1101 520-1101 520-2184
IM4 x 10 mm socket pin screw 4 520-1060 520-1060 520-2060
JM6 x 12 mm socket pin screw 4 520-1050 520-1050 520-2050
KM6 x 20 mm socket pin screw 4 520-9554 520-9554 520-2554
LM8 x 10 mm socket pin screw 4 520-1706 520-1706 520-2706
M1/4-20 x 1" socket pin screw 4 520-1053 520-1053 520-2588
N1/4-20 t-nut 4 530-9301 530-9301 530-2301
O4 mm security allen wrench 1 560-9646 560-9646 560-9646
Parts List
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly different than illustrated.
O
4 of 5 ISSUED: 8-29-07 SHEET #: 124-9102-4 08-17-11
Determine mount position on desktop and using
the base tube (D) as a template, mark and drill four
5/16" diameter holes through desktop. Place base
tube on desktop and secure using four 1/4-20 x 1"
socket pin screws (M) and four T-nuts (N).
Insert swivel tube (C) into base tube (D), adjust
swivel tube to desired height and secure using two
1/4-20 x 1/2" socket pin screws (G).
Insert two bushings (E) into the two holes on
adapter box (B) as shown.
Place adapter box (B) onto swivel tube (C) and
secure using two M8 x 25 mm socket pin screws
(H). Be sure that screws (H) are positioned into the
slots in the swivel tube (C) and are fully tightened.
Note: Narrow end of keyhole
slot faces toward bottom.
M
D
N
C
D
G
E
B
E
B
H
C
•Installations to desktops that have a gap between two supporting boards are not acceptable mounting surfaces for
the HP line of desktop swivel mounts.
CAUTION
1
3 4
2
Note: The holes on
base tube (D)will face
the back of the desktop.
5 of 5 ISSUED: 8-29-07 SHEET #: 124-9102-4 08-17-11
Identify hole pattern on back of screen.
Note: Desktop mount only supports screens with a VESA 100, VESA 200 and VESA 400 hole pattern.
FOR VESA® 100 x 100 MOUNTING PATTERN:
Thread four screws (I) into screen leaving 1/8" exposed thread as shown in fi gure 5.1.
Hook screen onto keyhole slots of adapter box (B), then fasten four screws (I) through the back of adapter box into
adapter plate as shown in fi gure 5.2.
FOR VESA® 200 x 100 and VESA® 200 x 200 MOUNTING PATTERN:
Attach adapter plate (A) to screen using four screws (J, K or L). Thread four M5 x 6 mm screws (F) into adapter plate
leaving 1/8" exposed thread as shown in fi gure 5.3.
Hook screen onto keyhole slots of adapter box (B), then fasten four screws (F) through the back of adapter box into
adapter plate as shown in fi gure 5.4.
fi g. 5.1 fi g. 5.2
fi g. 5.3
fi g. 5.4
1/8" SPACE
I
TIGHTEN
FASTENERS
THROUGH
BACK HOLES
1/8" SPACE
A
J, K or L
F
F
TIGHTEN
FASTENERS
THROUGH
BACK HOLES
B
I
I
A
B
F
5
• If screws don’t get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
www.peerlessmounts.com