Table of Contents
Philips 272S4LPJCB/93 User Manual
Displayed below is the user manual for 272S4LPJCB/93 by Philips which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Table of Contents
1. Important ................................................1
1.1 Safety precautions and maintenance ...1
1.2 Notational Descriptions .............................2
1.3 Disposal of product and packing
material ................................................................3
2. Setting up the monitor .........................4
2.1 Installation ...........................................................4
2.2 Operating the monitor ...............................5
2.3 MultiView ............................................................9
2.4 Remove the Base Assembly for VESA
Mounting ..........................................................11
3. Image Optimization .............................12
3.1 SmartImage ..................................................... 12
3.2 SmartContrast ..............................................13
4. PowerSensor™ ....................................14
5. MHL(MobileHigh-DenitionLink) 15
6. TechnicalSpecications ......................16
6.1 Resolution & Preset Modes...................18
6.2 Crystalclear ....................................................19
7. Power Management ............................20
8. Customer care and warranty ...........21
8.1 Philips’ Flat Panel Monitors Pixel
Defect Policy ..................................................21
8.2 Customer Care & Warranty .................23
9. Troubleshooting & FAQs ...................27
9.1 Troubleshooting ...........................................27
9.2 General FAQs ...............................................28
9.3 Multiview FAQs ............................................31
1
1. Important
1. Important
This electronic user’s guide is intended for
anyone who uses the Philips monitor. Take time
to read this user’s manual before you use your
monitor. It contains important information and
notes regarding operating your monitor.
The Philips guarantee applies provided the
product is handled properly for its intended use,
in accordance with its operating instructions and
upon presentation of the original invoice or cash
receipt, indicating the date of purchase, dealer’s
name and model and production number of the
product.
1.1 Safety precautions and
maintenance
Warnings
Use of controls, adjustments or procedures
other than those specied in this documentation
may result in exposure to shock, electrical
hazards and/or mechanical hazards.
Read and follow these instructions when
connecting and using your computer monitor.
Operation
• Please keep the monitor out of direct
sunlight, very strong bright lights and away
from any other heat source. Lengthy
exposure to this type of environment may
result in discoloration and damage to the
monitor.
• Remove any object that could fall into
ventilation holes or prevent proper cooling
of the monitor’s electronics.
• Do not block the ventilation holes on the
cabinet.
• When positioning the monitor, make
sure the power plug and outlet are easily
accessible.
• If turning off the monitor by detaching the
power cable or DC power cord, wait for 6
seconds before attaching the power cable
or DC power cord for normal operation.
• Please use approved power cord provided
by Philips at all times. If your power cord
is missing, please contact with your local
service center. (Please refer to Customer
Care Consumer Information Center)
• Do not subject the monitor to severe
vibration or high impact conditions during
operation.
• Do not knock or drop the monitor during
operation or transportation.
Maintenance
• To protect your monitor from possible
damage, do not put excessive pressure
on the monitor panel. When moving your
monitor, grasp the frame to lift; do not lift
the monitor by placing your hand or fingers
on the monitor panel.
• Unplug the monitor if you are not going to
use it for an extensive period of time.
• Unplug the monitor if you need to clean it
with a slightly damp cloth. The screen may
be wiped with a dry cloth when the power
is off. However, never use organic solvent,
such as, alcohol, or ammonia-based liquids
to clean your monitor.
• To avoid the risk of shock or permanent
damage to the set, do not expose the
monitor to dust, rain, water, or excessive
moisture environment.
• If your monitor gets wet, wipe it with dry
cloth as soon as possible.
• If foreign substance or water gets in
your monitor, please turn the power off
immediately and disconnect the power
cord. Then, remove the foreign substance
or water, and send it to the maintenance
center.
• Do not store or use the monitor in
locations exposed to heat, direct sunlight or
extreme cold.
• In order to maintain the best performance
of your monitor and use it for a longer
lifetime, please use the monitor in a
location that falls within the following
temperature and humidity ranges.
2
1. Important
• Temperature: 0-40°C 32-104°F
• Humidity: 20-80% RH
Important information for Burn-in/Ghost
image
• Always activate a moving screen saver
program when you leave your monitor
unattended. Always activate a periodic
screen refresh application if your monitor
will display unchanging static content.
Uninterrupted display of still or static
images over an extended period may cause
“burn in”, also known as “after-imaging” or
“ghost imaging”, on your screen.
• “Burn-in”, “after-imaging”, or “ghost imaging”
is a well-known phenomenon in LCD panel
technology. In most cases, the “burned in”
or “after-imaging” or “ghost imaging” will
disappear gradually over a period of time
after the power has been switched off.
Warning
Failure to activate a screen saver, or a periodic
screen refresh application may result in severe
“burn-in” or “after-image” or “ghost image”
symptoms that will not disappear and cannot be
repaired. The damage mentioned above is not
covered under your warranty.
Service
• The casing cover should be opened only by
qualified service personnel.
• If there is any need for any document for
repair or integration, please contact with
your local service center. (please refer to
the chapter of “Consumer Information
Center”)
• For transportation information, please refer
to “Technical Specifications”.
• Do not leave your monitor in a car/trunk
under direct sun light.
Note
Consult a service technician if the monitor
does not operate normally, or you are not sure
what procedure to take when the operating
instructions given in this manual have been
followed.
1.2 Notational Descriptions
The following subsections describe notational
conventions used in this document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be
accompanied by an icon and printed in bold or
italic type. These blocks contain notes, cautions
or warnings. They are used as follows:
Note
This icon indicates important information and
tips that help you make better use of your
computer system.
Caution
This icon indicates information that tells you
how to avoid either potential damage to
hardware or loss of data.
Warning
This icon indicates the potential for bodily harm
and tells you how to avoid the problem.
Some warnings may appear in alternate formats
and may not be accompanied by an icon. In such
cases, the specic presentation of the warning is
mandated by the relevant regulatory authority.
3
1. Important
1.3 Disposalofproductandpacking
material
Waste Electrical and Electronic Equipment-
WEEE
This marking on the product or on its
packaging illustrates that, under European
Directive 2012/19/EU governing used electrical
and electronic appliances, this product may
not be disposed of with normal household
waste. You are responsible for disposal of
this equipment through a designated waste
electrical and electronic equipment collection.
To determine the locations for dropping off
such waste electrical and electronic, contact
your local government ofce, the waste disposal
organization that serves your household or the
store at which you purchased the product.
Your new monitor contains materials that can
be recycled and reused. Specialized companies
can recycle your product to increase the
amount of reusable materials and to minimize
the amount to be disposed of.
All redundant packing material has been
omitted. We have done our utmost to make the
packaging easily separable into mono materials.
Please nd out about the local regulations on
how to dispose of your old monitor and packing
from your sales representative.
Takingback/RecyclingInformationfor
Customers
Philips establishes technically and economically
viable objectives to optimize the environmental
performance of the organization's product,
service and activities.
From the planning, design and production
stages, Philips emphasizes the important of
making products that can easily be recycled. At
Philips, end-of-life management primarily entails
participation in national take-back initiatives
and recycling programs whenever possible,
preferably in cooperation with competitors,
which recycle all materials (products and related
packaging material) in accordance with all
Environmental Laws and taking back program
with the contractor company.
Your display is manufactured with high quality
materials and components which can be
recycled and reused.
To learn more about our recycling program
please visit:
http://www.philips.com/a-w/about/sustainability.
html
4
2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Packagecontents
* Dual-link DVI cable
* DP cable* VGA cable
272S4
Audio cable
Power cable
2016
使用产品前请阅读使用说明
保留备用
user s manual
* CD
* Different according to region.
Install base stand
1. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the stand to the VESA
mount area until the latch locks the
stand.
(2) Gently attach the base to the stand.
1
2
5
2. Setting up the monitor
Connecting to your computer
12 3 4 5 6 8
7
1
3
5
4
6
7
9
1 AC power input
2 DVI input
3 MHL-HDMI input
4 Display port input
5 VGA input
6 Audio input
7 Earphone jack
8 Kensington anti-theft lock
9 Zero power Switch
2.2 Operating the monitor
Description of the control buttons
5 4
3
21
76
1Switch monitor’s power ON and
OFF.
2Access the OSD menu
.
Conrm the OSD adjustment.
3Adjust the OSD menu.
4
User preference key. Customize
your own preference function
from OSD to become the “user
key”.
5PIP/PBP/Off/Swap
6Return to previous OSD layer.
7
SmartImage
hot key
. There are 6
modes to select: Ofce, Photo,
Movie, Game, Economy, Off.
Customizeyourown“USER”key
This hot key allows you to setup your favorite
function key.
1. Press button on the front bezel to
enter OSD Menu Screen.
6
2. Setting up the monitor
2. Press ▲ or ▼ button to select main menu
[OSD Settings], then press button.
3. Press ▲ or ▼ button to select [User],
then press button.
4. Press ▲ or ▼ button to select your
preferred function: [Input], [Audio Source],
[Volume].
5. Press button to conrm your selection.
Now you can press the hotkey directly on
the front bezel. Only your pre-selected function
will appear for quick access.
For example, if you selected [Audio Source] as
the hotkey, press the button on the front
bezel, the [Audio Source] menu appears.
MHL-HDMI
DisplayPort
Audio in
Audio Source
U
Independentaudioplayback,regardlessof
video input
Your Philips monitor can play the audio source
independently, regardless of which video input.
For example, you can play your MP3 player
from the audio source connected to the [Audio
In] port of this monitor, and still watch your
video source connected from [MHL-HDMI], or
[DisplayPort].
1. Press button on the front bezel to
enter OSD Menu Screen.
Power Sensor
Input
Picture
PIP / PBP
Audio
Volume
Stand-Alone
Mute
Audio Source
Audio in
MHL-HDMI
DisplayPort
2. Press ▲ or ▼ button to select main menu
[Audio], then press button.
3. Press ▲ or ▼ button to select [Audio
Source], then press button.
4. Press ▲ or ▼ button to select your
preferred audio source: [DisplayPort],
[MHL-HDMI] or [Audio In].
5. Press button to conrm your selection.
Note
• The next time you turn on this monitor, it
will by default select the audio source you
previously selected.
• In case you want to change it, you will have
to go through the selection steps again to
select your new preferred audio source as
the default.
7
2. Setting up the monitor
Description of the On Screen Display
WhatisOn-ScreenDisplay(OSD)?
On-Screen Display (OSD) is a feature in all
Philips monitors. It allows an end user to adjust
screen performance or select functions of
the monitors directly through an on-screen
instruction window. A user friendly on-screen-
display interface is shown as below:
Off
On
Power Sensor
Input
Picture
PIP / PBP
Audio
0
Basic and simple instruction on the control
keys
In the OSD shown above, you can press ▲▼
buttons on the front bezel of the monitor
to move the cursor, and press button to
conrm the choice or change.
The OSD Menu
Below is an overall view of the structure of
the On-Screen Display. You can use this as a
reference when you want to work your way
around the different adjustments later on.
Main menu Sub menu
Picture
OSD Settings
Setup
Language
Color
Input
PowerSensor
Audio
PIP / PBP
Horizontal
Vertical
Transparency
OSD Time Out
Auto
Power LED
H-Position
V-Position
English, Deutsch, Español, Ελληνική, Français, Italiano, Maryar, Nederlands,
Português, Português do Brasil, Polski, Русский, Svenska, Suomi, Türkçe,
Čeština, Українська, 简体中文, 繁體中文, 日本語, 한국어
Color Temperature
sRGB
User Define
On
Off
VGA
DVI
MHL-HDMI
DisplayPort
SmartResponse
Picture Format
SmartContrast
Contrast
Sharpness
Brightness
Volume
Mute
Audio Source
Gamma
Over Scan
User
Stand-Alone
PIP Position
PIP / PBP Mode
Swap
PIP Size
PIP / PBP Input
0~100
0~100
Off, 1, 2, 3, 4
5s, 10s, 20s, 30s, 60s
Input, Audio Source, Volume
0, 1, 2, 3, 4
0~100
0~100
On, Off
5000K, 6500K, 7500K,
8200K, 9300K, 11500K
Red: 0~100
Green: 0~100
Blue: 0~100
0, 1, 2, 3, 4
0~100
0~100
On, Off
On, Off
Audio in, MHL-HDMI, DisplayPort
Off, Fast, Faster, Fastest
On, Off
0~100
0~100
Wide screen, 4:3, 16:9, 1:1
On, Off
1.8, 2.0, 2.2, 2.4, 2.6
Small, Middle, Large
Top-Right, Top-Left,
Bottom-Right, Bottom-Left
VGA, DVI, MHL-HDMI, DisplayPort
Off, PIP, PBP
Phase
Clock
Resolution Notification
0~100
0~100
DisplayPort
Reset
Information
1.1, 1.2
Yes, No
8
2. Setting up the monitor
Resolutionnotication
This monitor is designed for optimal
performance at its native resolution, 2560 ×
1440 @ 60 Hz. When the monitor is powered
on at a different resolution, an alert is displayed
on screen: Use 2560 × 1440 @ 60 Hz for best
results.
Display of the native resolution alert can be
switched off from Setup in the OSD (On
Screen Display) menu.
Physical Function
Tilt
20˚
-5˚
Swivel
+65˚
-65˚
Height adjustment
120mm
Pivot
90˚
0˚
9
2. Setting up the monitor
2.3 MultiView
Whatisit?
Multiview enables active dual connect and view
so that you can work with multiple devices like
PC and Notebook side-by-side simultaneously,
making complex multi-tasking work a breeze.
WhydoIneedit?
With the ultra high resolution Philips
MultiView display, you can experience a world
of connectivity in a comfortable way in the
ofce or at home. With this display, you can
conveniently enjoy multiple content sources at
one screen. For example: You may want to keep
an eye on the live news video feed with audio
in the small window, while working on your
latest blog, or you may want to edit an Excel le
from your Ultrabook, while logged into secured
company intranet to access les from a desktop.
How to enable MultiViewbyhotkey?
1. Press the hotkey directly on the
front bezel.
2. The MultiView selection menu appears.
Press ▲ or ▼ button to select.
PBP
Swap
Off
PIP
Mul View
P
3. Press button to conrm your selection
and then exit automatically.
How to enable MultiView by OSD menu?
Besides pressing the hotkey directly on
the front bezel, the MultiView function can also
be selected in OSD menu.
1. Press button on the front bezel to
enter OSD Menu Screen.
Power Sensor
Input
Picture
PIP / PBP
Audio
PIP/PBP Mode
PIP/PBP Input
PIP Size
Swap
PIP Posion
Off
PIP
PBP
2. Press ▲ or ▼ button to select main menu
[PIP / PBP], then press button.
3. Press ▲ or ▼ button to select [PIP / PBP
Mode], then press button.
4. Press ▲ or ▼ button to select [PIP] or
[PBP].
5. Now you can move backward to set the
[PIP / PBP Input], [PIP Size], [PIP Position].,
or [Swap].
6. Press button to conrm your selection.
MultiView in OSD menu
• PIP / PBP Mode: There are two modes for
MultiView: [PIP] and [PBP].
10
2. Setting up the monitor
[PIP]: Picture in Picture
Open up a sub-window of
another signal source.
B
A (main)
When the sub source is not
detected:
B
A (main)
[PBP]: Picture by Picture
Open up a sub-window side-
by-side of another signal
source. A (main) B
When the sub source is not
detected: A (main) B
Note
The black strip shows on the top and the
bottom of the screen for the correct aspect
ratio when in the PBP mode.
• PIP / PBP Input: There are four different
video input to choose as the sub display
source: [VGA],[DVI], [MHL-HDMI], and
[DisplayPort].
Please refer below table for compatibility of
main/sub input source.
SUB SOURCE POSSIBILITY (xl)
Inputs VGA DP DVI MHL-
HDMI
MAIN
SOURCE
(xl)
VGA ● ● ●
DP ● ● ●
DVI ● ● ●
MHL-
HDMI ● ● ●
• PIP Size: When PIP is activated, there are
three sub-window sizes to choose: [Small],
[Middle], [Large].
B
A (main)
Small
Middle
Large
• PIP Position: When PIP is activated, there
are four sub-window positions to choose.
Top-Left Top-Right
B
A (main)
B
A (main)
Bottom-Left Bottom-Right
B
A (main) A (main)
B
• Swap: The main picture source and the sub
picture source swapped on the display.
Swap A and B source in [PIP] mode:
B
A (main) ↔
A
B (main)
Swap A and B source in [PBP] mode:
A (main) B↔ B (main) A
11
2. Setting up the monitor
• Off: Stop MultiView function.
A (main)
Note
When you do the SWAP function, the video
and its audio source will swap at the same time.
(Refer to page 6 “Independentaudioplayback,
regardless of video input” for more detail.)
2.4 RemovetheBaseAssemblyfor
VESA Mounting
Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.
1. Extend the monitor base to its maximum
height.
2. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen. Then lift the monitor
stand.
3. While keeping the release button pressed,
tilt the base and slide it out.
Note
This monitor accepts a 100mm x 100mm
VESA-Compliant mounting interface.
100mm
100mm
12
3. Image Optimization
3. Image Optimization
3.1 SmartImage
Whatisit?
SmartImage provides presets that optimize
display for different types of content, dynamically
adjusting brightness, contrast, color and
sharpness in real time. Whether you're working
with text applications, displaying images or
watching a video, Philips SmartImage delivers
great optimized monitor performance.
WhydoIneedit?
You want a monitor that delivers optimized
display all your favorite types of content,
SmartImage software dynamically adjust
brightness, contrast, color and sharpness in
real time to enhance your monitor viewing
experience.
Howdoesitwork?
SmartImage is an exclusive, leading edge Philips
technology that analyzes the content displayed
on your screen. Based on a scenario you select,
SmartImage dynamically enhances the contrast,
color saturation and sharpness of images to
enhance the contents being displayed - all in
real time with the press of a single button.
HowtoenableSmartImage?
1. Press to launch the SmartImage on
screen display.
2. Keep pressing ▲▼ to toggle among
Ofce, Photo, Movie, Game, Economy and
Off.
3. The SmartImage on screen display will
remain on screen for 5 seconds, or you can
also press button to conrm.
There are six modes to select: Ofce, Photo,
Movie, Game, Economy and Off.
Photo
Movie
Game
Economy
Office
SmartImage
ff
• Office: Enhances text and dampens
brightness to increase readability and
reduce eye strain. This mode significantly
enhances readability and productivity when
you’re working with spreadsheets, PDF files,
scanned articles or other general office
applications.
• Photo: This profile combines color
saturation, dynamic contrast and sharpness
enhancement to display photos and other
images with outstanding clarity in vibrant
colors - all without artifacts and faded
colors.
• Movie: Ramped up luminance, deepened
color saturation, dynamic contrast and
razor sharpness displays every details in
darker areas of your videos without color
washout in brighter areas maintaining a
dynamic natural values for the ultimate
video display.
• Game: Turn on over drive circuit for best
response time, reduce jaggy edges for fast
moving objects on screen, enhance contrast
ratio for bright and dark scheme, this
profile delivers the best gaming experience
for gamers.
• Economy: Under this profile, brightness,
contrast are adjusted and backlighting
finetuned for just right display of everyday
13
3. Image Optimization
office applications and lower power
consumption.
• Off: No optimization by SmartImage.
3.2 SmartContrast
Whatisit?
Unique technology that dynamically analyzes
displayed content and automatically optimizes
a Monitor's contrast ratio for maximum visual
clarity and viewing enjoyment, stepping up
backlighting for clearer, crisper and brighter
images or dimming backlighting for clear display
of images on dark backgrounds.
WhydoIneedit?
You want the very best visual clarity and
viewing comfort for every type of content.
SmartContrast dynamically controls contrast
and adjusts backlighting for clear, crisp, bright
gaming and video images or displays clear,
readable text for ofce work. By reducing your
monitor's power consumption, you save on
energy costs and extend the lifetime of your
monitor.
Howdoesitwork?
When you activate SmartContrast, it will analyse
the content you are displaying in real time to
adjust colors and control backlight intensity. This
function will dynamically enhance contrast for a
great entertainment experience when viewing
videos or playing games.
14
4. PowerSensor™
4. PowerSensor™
Howdoesitwork?
• PowerSensor works on principle of
transmission and reception of harmless
“infrared” signals in order to detect
userpresence.
• When the user is in front of the monitor
the monitor operates normally, at the
predetermined settings that the user has set -
i.e. Brightness, Contrast, Color, etc.
• Assuming that the monitor was set to 100%
of brightness for example, when the user
leaves his seat and is no longer in front of the
monitor, the monitor automatically reduces
the power consumption up to 80%.
User present in front User not present
ttaW ttaW
Power consumption as illustrated above is for
reference purpose only.
Setting
Default settings
PowerSensor is designed to detect the presence of
the user located between 30 and 100 cm (12 and
40 inches) from the display and within ve degrees
left or right of the monitor.
Custom settings
If you prefer to be in a position outside the
perimeters listed above, choose a higher strength
signal for optimal detection efciency: The higher
the setting, the stronger the detection signal. For
maximum PowerSensor efciency and proper
detection, please position yourself directly in front
of your monitor.
• If you choose to position yourself more than
100 cm or 40 inches from the monitor use
the maximum detection signal for distances
up to 120 cm or 47 inches. (Setting 4)
• Since some dark colored clothing tends to
absorb infrared signals even when the user
is within 100 cm or 40 inches of the display,
step up signal strength when wearing black or
other dark clothes.
Hotkey Sensor distance
Landscape/Portraitmode(forselectivemodels)
Landscape mode
Portrait mode
Above illustrations are for reference purpose only,
may not reect the exact display of this model.
How to adjust settings
If PowerSensor is not operating correctly inside or
outside the default range, here’s how to ne-tune
detection:
• Customize the button to serve as
PowerSensor hot key. Refer “Customize your
own “USER” key section. (If your display is
with “Sensor” hot key, go to next step.)
• Press the PowerSensor hot key.
• You will find the adjustment bar.
• Adjust the PowerSensor detection adjustment
to Setting 4 and press OK.
• Test the new setup to see if PowerSensor
properly detects you in your current position.
• PowerSensor function is designed to work
in Landscape mode (horizontal position)
only. After PowerSensor turn on it, it will
automatically turn Off if the monitor is used
in Portrait mode (90 degree/vertical position);
it will automatically turn ON if monitor is
returned to its default Landscape position.
Note
A manually selected PowerSensor mode will
remain operational unless and until it is readjusted
or the default mode is recalled. If you nd that
the PowerSensor is excessively sensitive to nearby
motion for some reason, please adjust to a lower
signal strength.
15
5. MHL (Mobile High-Denition Link)
5. MHL (Mobile High-
DefinitionLink)
Whatisit?
Mobile High Denition Link (MHL) is a mobile
audio/video interface for directly connecting
mobile phones and other portable devices to high-
denition displays.
An optional MHL cable allows you to simply
connect your MHL capable mobile device to this
large Philips MHL display, and watch your HD
videos come to life with full digital sound.
Now not only you can enjoy your mobile games,
photos, movies, or other apps on its big screen, you
can simultaneously charge your mobile device so
you never run out of power half way.
HowdoIusetheMHLfunction?
To use the MHL function, you need an
MHLCertied mobile device. To nd a list of
MHLcertied devices, visit the ofcial MHL website
(http://www.mhlconsortium.org)
You also need a optional MHL certied special
cable in order to use this function.
Howdoesitwork?(howdoIconnect?)
Connect the optional MHL cable to the mini USB
port on the mobile device side, and the [MHL-
HDMI] marked port on the monitor side. You
are now ready to view the images on your big
screen display and operate all function on you
the mobile device such as internet surng, game
playing, photo browsing…etc. if your monitor has
speaker function, then you will be able to hear
accompanying sound too. When the MHL cable is
disconnected or the mobile device is turned off,
the MHL function will be automatically disabled.
MHL
MHL-HDMI
Note
• The port marked [MHL-HDMI] is the only
port on the monitor that supports the MHL
function when the MHL cable is used. Note
that the MHL certified cable is different than a
standard HDMI cable.
• A mobile device with MHL certification must
be purchased separately.
• You may have to manually switch the monitor
to MHL-HDMI mode in order to activate the
monitor, if you have other devices already
working and connected to available inputs.
• This Philips display is MHL certified. However,
in case your MHL device does not connect
or work correctly, check with your MHL
device FAQ or vendor directly for direction.
The policy of your device manufacturer may
require you to purchase their brand specific
MHL cable or adapter in order to work with
other brand MHL devices. Note that this is
not a fault of this Philips display.
16
6. Technical Specications
6. Technical Specifications
Picture/Display
Monitor Panel Type TFT LCD
Backlight LED
Panel Size 27" W (68.6 cm)
Aspect Ratio 16:9
Pixel Pitch 0.233 x 0.233 mm
SmartContrast 20,000,000:1
Response Time (typ.) 5 ms(GtG)
SmartResponse 2 ms (GtG)
Optimum Resolution 2560 x 1440 @ 60 Hz
Viewing Angle 170° (H) / 160° (V)(typ.) @ C/R > 10
Picture Enhancement SmartImage
Display Color 16.7M
Vertical Refresh Rate 56 Hz - 76 Hz
Horizontal Frequency 30 kHz - 83 kHz
sRGB YES
Connectivity
Signal Input/Output DVI(Digtal), VGA(Analog), DisplayPort, MHL-HDMI
Input Signal Separate Sync, Sync on Green
Audio In/Out PC Audio-in, Headphone Out
Convenience
Built-in Speakers 2 W x2
User Convenience
OSD Languages
English, German, Spanish, Greek, French, Italian, Hungarian, Dutch,
Portuguese, Brazil Portuguese, Polish, Russian, Swedish, Finnish,
Turkish, Czech, Ukranian, Simplied Chinese, Traditional Chinese,
Japanese, Korean
Other Convenience VESA mount (100 x 100 mm), Kensington Lock
Plug & Play Compatibility DDC/CI, sRGB, Windows 10/8.1/8/7, Mac OSX
Stand
Tilt -5° / +20°
Swivel -65° / +65°
Height Adjustment 120 mm
Pivot Adjustment 90°
Power
On Mode 47 W (typ.), 85 W (max.)
Sleep (Standby) < 0.5 W (typ.)
Off < 0.3 W (typ.)
On Mode (ECO Mode) 22 W (typ.)
Power
Consumption AC Input Voltage at
100 V AC, 50 Hz
AC Input Voltage at
115 V AC, 60 Hz
AC Input Voltage at
230 V AC, 50 Hz
Normal Operation 46.9 W (typ.) 47 W (typ.) 47.1 W (typ.)
17
6. Technical Specications
Sleep (Standby) < 0.5 W (typ.) < 0.5 W (typ.) < 0.5 W (typ.)
Off < 0.3 W (typ.) < 0.3 W (typ.) < 0.3 W (typ.)
Heat Dissipation* AC Input Voltage at
100 V AC, 50 Hz
AC Input Voltage at
115 V AC, 60 Hz
AC Input Voltage at
230 V AC, 50 Hz
Normal Operation 160.07 BTU/hr (typ.) 160.41 BTU/hr (typ.) 160.75 BTU/hr
(typ.)
Sleep (Standby) < 1.37 BTU/hr (typ.) < 1.37 BTU/hr (typ.) < 1.37 BTU/hr (typ.)
Off < 1.02 BTU/hr (typ.) < 1.02 BTU/hr (typ.) < 1.02 BTU/hr (typ.)
Power LED Indicator On mode: White, Standby/Sleep mode: White (blinking)
Power Supply Built-in, 100 - 240 VAC, 50-60 Hz
PowerSensor 10W(typ)
Dimension
Product with stand (WxHxD) 639 x 540 x 244 mm
Product without stand (WxHxD) 639 x 405 x 68 mm
Product with packaging (WxHxD) 490 x 299 x 740 mm
Weight
Product with stand 6.72 kg
Product without stand 4.4 kg
Product with packaging 10.6kg
Operating Condition
Temperature range (operation) 0°C to 40 °C
Relative humidity (operation) 20% to 80%
Atmospheric pressure
(operation) 700 to 1060hPa
Temperature range
(Non-operation) -20°C to 60°C
Relative humidity
(Non-operation) 10% to 90%
Atmospheric pressure
(Non-operation) 500 to 1060hPa
Environmental
ROHS YES
Packaging 100 % recyclable
Specic Substances 100 % PVC BFR free housing
Compliance and standards
Regulatory Approvals CE Mark, FCC Class B, CU-EAC, TCO, TUV-GS, TUV-Ergo, ETL, BSMI,
PSB, RCM, SEMKO
Cabinet
Color Black/Silver
Finish Texture
Note
1. This data is subject to change without notice. Go to www.philips.com/support to download the latest
version of leaet.
2. Smart response time is the optimum value from either GtG or GtG (BW) tests.
18
6. Technical Specications
6.1 Resolution&PresetModes
MaximumResolution
2560 x 1440 @ 60 Hz (digital input)
RecommendedResolution
2560 x 1440 @ 60 Hz (digital input)
H.freq.(kHz) Resolution V.freq.(Hz)
31.47 720 x 400 70.09
31.47 640 x 480 59.94
35.00 640 x 480 66.67
37.86 640 x 480 72.81
37.5 640 x 480 75.00
37.88 800 x 600 60.32
46.88 800 x 600 75.00
48.36 1024 x 768 60.00
60.02 1024 x 768 75.03
44.77 1280 x 720 59.86
63.98 1280 x 1024 60.02
79.98 1280 x 1024 75.03
55.94 1440 x 900 59.89
70.64 1440 x 900 74.99
75.00 1600 x 1200 60.00
65.29 1680 x 1050 59.95
67.50 1920 x 1080 60.00
74.04 1920 x 1080 59.95
88.79 2560 x 1440 59.95
Note
• Please notice that your display works best at native resolution of 2560 x 1440 @ 60Hz. For best
display quality, please follow this resolution recommendation.
• While using DVI, a Dual-link DVI cable is required for maximum resolution 2560 x 1440.
• The highest supporting screen resolution on HDMI is 2560 x 1440, but it always depends on your
capability of graphics card and BluRay/video players.
19
6. Technical Specications
6.2 Crystalclear
This latest Philips display delivers Crystalclear,
2560x1440 images. Utilizing high performance
panels with high density pixel count, 178/178
wide viewing angles, enabled by high bandwidth
sources like Displayport, HDMI, or Dual link
DVI, this new display will make your images
and graphics come alive. Whether you are
demanding professional requiring extremely
detailed information for CAD-CAM solutions,
using 3D graphic applications or a nancial
wizard working on huge spreadsheets, this
Philips display will give you Crystalclear images.
20
7. Power Management
7. Power Management
If you have VESA DPM compliance display card
or software installed in your PC, the monitor
can automatically reduce its power consumption
when not in use. If an input from a keyboard,
mouse or other input device is detected,
the monitor will 'wake up' automatically. The
following table shows the power consumption
and signaling of this automatic power saving
feature:
PowerManagementDenition
VESA
Mode Video H-sync V-sync Power Used LED Color
Active ON Ye s Ye s 47 W (typ.),
85 (max.) White
Sleep
(Standby) OFF No No < 0.5 W (typ.) White
(blink)
Off OFF - - < 0.3 W (typ.) OFF
The following setup is used to measure power
consumption on this monitor.
• Native resolution: 2560 x 1440
• Contrast: 50%
• Brightness: 100%
• Color temperature: 6500k with full white
pattern
• Audio Inactive (Off)
Note
This data is subject to change without notice.
21
8. Customer care and warranty
black pixel. Other combinations of lit and dark
sub pixels appear as single pixels of other colors.
Types of Pixel Defects
Pixel and sub pixel defects appear on the screen
in different ways. There are two categories of
pixel defects and several types of sub pixel
defects within each category.
Bright Dot Defects
Bright dot defects appear as pixels or sub pixels
that are always lit or 'on'. That is, a bright dot is
a sub-pixel that stands out on the screen when
the monitor displays a dark pattern. There are
the types of bright dot defects.
One lit red, green or blue sub pixel.
Two adjacent lit sub pixels:
- Red + Blue = Purple
- Red + Green = Yellow
- Green + Blue = Cyan (Light Blue)
Three adjacent lit sub pixels (one white pixel).
8. Customer care and
warranty
8.1 Philips’ Flat Panel Monitors Pixel
Defect Policy
Philips strives to deliver the highest quality
products. We use some of the industry's most
advanced manufacturing processes and practice
stringent quality control. However, pixel or
sub pixel defects on the TFT Monitor panels
used in at panel monitors are sometimes
unavoidable. No manufacturer can guarantee
that all panels will be free from pixel defects,
but Philips guarantees that any monitor with an
unacceptable number of defects will be repaired
or replaced under warranty. This notice explains
the different types of pixel defects and denes
acceptable defect levels for each type. In order
to qualify for repair or replacement under
warranty, the number of pixel defects on a TFT
Monitor panel must exceed these acceptable
levels. For example, no more than 0.0004% of
the sub pixels on a monitor may be defective.
Furthermore, Philips sets even higher quality
standards for certain types or combinations
of pixel defects that are more noticeable than
others. This policy is valid worldwide.
subpixel
pixel
Pixels and Sub pixels
A pixel, or picture element, is composed of
three sub pixels in the primary colors of red,
green and blue. Many pixels together form an
image. When all sub pixels of a pixel are lit, the
three colored sub pixels together appear as a
single white pixel. When all are dark, the three
colored sub pixels together appear as a single
22
8. Customer care and warranty
Note
A red or blue bright dot must be more than 50
percent brighter than neighboring dots while
a green bright dot is 30 percent brighter than
neighboring dots.
BlackDotDefects
Black dot defects appear as pixels or sub pixels
that are always dark or 'off'. That is, a dark dot is
a sub-pixel that stands out on the screen when
the monitor displays a light pattern. These are
the types of black dot defects.
Proximity of Pixel Defects
Because pixel and sub pixels defects of the
same type that are near to one another may be
more noticeable, Philips also species tolerances
for the proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement
due to pixel defects during the warranty period,
a TFT Monitor panel in a Philips at panel
monitor must have pixel or sub pixel defects
exceeding the tolerances listed in the following
tables.
BRIGHTDOTDEFECTS ACCEPTABLE LEVEL
1 lit subpixel 3
2 adjacent lit subpixels 1
3 adjacent lit subpixels (one white pixel) 0
Distance between two bright dot defects* >15mm
Total bright dot defects of all types 3
BLACK DOT DEFECTS ACCEPTABLE LEVEL
1 dark subpixel 5 or fewer
2 adjacent dark subpixels 2 or fewer
3 adjacent dark subpixels 0
Distance between two black dot defects* >15mm
Total black dot defects of all types 5 or fewer
TOTAL DOT DEFECTS ACCEPTABLE LEVEL
Total bright or black dot defects of all types 5 or fewer
Note
1. 1 or 2 adjacent sub pixel defects = 1 dot defect
2. This monitor is ISO9241-307 compliant (ISO9241-307: Ergonomic requirement , analysis and
compliance test methods for electronic visual displays).
3. ISO9241-307 is the successor of formerly known ISO13406 standard, which is withdrawn by the
International Organisation for Standardisation (ISO) per: 2008-11-13.
23
8. Customer care and warranty
8.2 Customer Care & Warranty
For warranty coverage information and additional support requirements valid for your region, please
visit www.philips.com/support website for details or contact your local Philips Customer Care Center.
For extended warranty, if you would like to extend your general warranty period, an Out of Warranty
service package is offered via our Certified Service Center.
If you wish to make use of this service, please be sure to purchase the service within 30 calendar days
of your original purchase date. During the extended warranty period, the service includes pickup, repair
and return service, however the user will be responsible for all costs accrued.
If the Certified Service Partner cannot perform the required repairs under the offered extended
warranty package, we will find alternative solutions for you, if possible, up to the extended warranty
period you have purchased.
Please contact our Philips Customer Service Representative or local contact center (by Consumer care
number) for more details.
Philips Customer Care Center number listed below.
• Local Standard
Warranty Period
• Extended Warranty Period • Total Warranty Period
• Depend on
different Regions
• + 1 Year • Local Standard warranty period +1
• + 2 Years • Local Standard warranty period +2
• + 3 Years • Local Standard warranty period +3
**Proof of original purchase and extended warranty purchase required.
ContactInformationforWESTERNEUROPEregion:
Country CSP Hotline Number Price Opening Hours
Austria RTS +43 0810 000206 € 0.07 Mon to Fri : 9am - 6pm
Belgium Ecare +32 078 250851 € 0.06 Mon to Fri : 9am - 6pm
Cyprus Alman 800 92 256 Free of charge Mon to Fri : 9am - 6pm
Denmark Infocare +45 3525 8761 Local call tariff Mon to Fri : 9am - 6pm
Finland Infocare +358 09 2290 1908 Local call tariff Mon to Fri : 9am - 6pm
France Mainteq +33 082161 1658 € 0.09 Mon to Fri : 9am - 6pm
Germany RTS +49 01803 386 853 € 0.09 Mon to Fri : 9am - 6pm
Greece Alman +30 00800 3122 1223 Free of charge Mon to Fri : 9am - 6pm
Ireland Celestica +353 01 601 1161 Local call tariff Mon to Fri : 8am - 5pm
Italy Anovo Italy +39 840 320 041 € 0.08 Mon to Fri : 9am - 6pm
Luxembourg Ecare +352 26 84 30 00 Local call tariff Mon to Fri : 9am - 6pm
Netherlands Ecare +31 0900 0400 063 € 0.10 Mon to Fri : 9am - 6pm
Norway Infocare +47 2270 8250 Local call tariff Mon to Fri : 9am - 6pm
Poland MSI +48 0223491505 Local call tariff Mon to Fri : 9am - 6pm
24
8. Customer care and warranty
Portugal Mainteq 800 780 902 Free of charge Mon to Fri : 8am - 5pm
Spain Mainteq +34 902 888 785 € 0.10 Mon to Fri : 9am - 6pm
Sweden Infocare +46 08 632 0016 Local call tariff Mon to Fri : 9am - 6pm
Switzerland ANOVO CH +41 02 2310 2116 Local call tariff Mon to Fri : 9am - 6pm
United Kingdom Celestica +44 0207 949 0069 Local call tariff Mon to Fri : 8am - 5pm
Contact Information for China:
Country Call center Consumer care number
China PCCW Limited 4008 800 008
ContactInformationforNORTHAMERICA:
Country Call center Consumer care number
U.S.A. EPI-e-center (877) 835-1838
Canada EPI-e-center (800)479-6696
25
8. Customer care and warranty
ContactInformationforCENTRALANDEASTERNEUROPEregion:
Country Call center CSP Consumer care number
Belarus NA IBA +375 17 217 3386
+375 17 217 3389
Bulgaria NA LAN Service +359 2 960 2360
Croatia NA MR Service Ltd +385 (01) 640 1111
Czech Rep. NA Asupport 420 272 188 300
Estonia NA FUJITSU +372 6519900(General)
+372 6519972(workshop)
Georgia NA Esabi +995 322 91 34 71
Hungary NA Profi Service
+36 1 814 8080(General)
+36 1814 8565(For AOC&Philips
only)
Kazakhstan NA Classic Service I.I.c. +7 727 3097515
Latvia NA ServiceNet LV +371 67460399
+371 27260399
Lithuania NA UAB Servicenet +370 37 400160(general)
+370 7400088 (for Philips)
Macedonia NA AMC +389 2 3125097
Moldova NA Comel +37322224035
Romania NA Skin +40 21 2101969
Russia NA CPS +7 (495) 645 6746
Serbia&Montenegro NA Kim Tec d.o.o. +381 11 20 70 684
Slovakia NA Datalan Service +421 2 49207155
Slovenia NA PC H.and +386 1 530 08 24
the republic of Belarus NA ServiceBy + 375 17 284 0203
Turkey NA Tecpro +90 212 444 4 832
Ukraine NA Topaz +38044 525 64 95
Ukraine NA Comel +380 5627444225
ContactInformationforLATINAMERICAregion:
Country Call center Consumer care number
Brazil Vermont 0800-7254101
Argentina 0800 3330 856
26
8. Customer care and warranty
Contact Information for APMEA region:
Country ASP Consumer care number Opening hours
Australia AGOS NETWORK PTY LTD 1300 360 386 Mon.~Fri. 9:00am-5:30pm
New Zealand Visual Group Ltd. 0800 657447 Mon.~Fri. 8:30am-5:30pm
Hong Kong
Macau
Company: Smart Pixels
Technology Ltd.
Hong Kong:
Tel: +852 2619 9639
Macau:Tel: (853)-0800-987
Mon.~Fri. 9:00am-6:00pm
Sat. 9:00am-1:00pm
India REDINGTON INDIA LTD Tel: 1 800 425 6396
SMS: PHILIPS to 56677 Mon.~Fri. 9:00am-5:30pm
Indonesia PT. CORMIC SERVISINDO
PERKASA
+62-21-4080-9086 (Customer
Hotline)
+62-8888-01-9086 (Customer
Hotline)
Mon.~Thu. 08:30-12:00;
13:00-17:30
Fri. 08:30-11:30; 13:00-17:30
Korea Alphascan Displays, Inc 1661-5003 Mon.~Fri. 9:00am-5:30pm
Sat. 9:00am-1:00pm
Malaysia R-Logic Sdn Bhd +603 5102 3336 Mon.~Fri. 8:15am-5:00pm
Sat. 8:30am-12:30am
Pakistan TVONICS Pakistan +92-213-6030100 Sun.~Thu. 10:00am-6:00pm
Singapore
Philips Electronics Singapore
Pte Ltd (Philips Consumer Care
Center)
(65) 6882 3966 Mon.~Fri. 9:00am-6:00pm
Sat. 9:00am-1:00pm
Taiwan FETEC.CO 0800-231-099 Mon.~Fri. 09:00 - 18:00
Thailand Axis Computer System Co.,
Ltd. (662) 934-5498 Mon.~Fri. 8:30am~05:30pm
South Africa Computer Repair Technologies 011 262 3586 Mon.~Fri. 8:00am~05:00pm
Israel Eastronics LTD 1-800-567000 Sun.~Thu. 08:00-18:00
Vietnam
FPT Service Informatic
Company Ltd. - Ho Chi Minh
City Branch
+84 8 38248007 Ho Chi Minh
City
+84 5113.562666 Danang City
+84 5113.562666 Can tho
Province
Mon.~Fri. 8:00-12:00, 13:30-
17:30,Sat. 8:00-12:00
Philippines EA Global Supply Chain
Solutions ,Inc. (02) 655-7777; 6359456 Mon.~Fri. 8:30am~5:30pm
Armenia
Azerbaijan
Georgia
Kyrgyzstan
Tajikistan
Firebird service centre +97 14 8837911 Sun.~Thu. 09:00 - 18:00
Uzbekistan Soniko Plus Private Enterprise
Ltd +99871 2784650 Mon.~Fri. 09:00 - 18:00
Turkmenistan Technostar Service Centre +(99312) 460733, 460957 Mon.~Fri. 09:00 - 18:00
Japan フィリップスモニター
・サポ ートセンター 0120-060-530 Mon.~Fri. 10:00 - 17:00
27
9. Troubleshooting & FAQs
9. Troubleshooting & FAQs
9.1 Troubleshooting
This page deals with problems that can be
corrected by a user. If the problem still persists
after you have tried these solutions, contact
Philips customer service representative.
Common Problems
NoPicture(PowerLEDnotlit)
• Make sure the power cord is plugged into
the power outlet and into the back of the
monitor.
• First, ensure that the power button on the
front of the monitor is in the OFF position,
then press it to the ON position.
NoPicture(PowerLEDisWhite)
• Make sure the computer is turned on.
• Make sure the signal cable is properly
connected to your computer.
• Make sure the monitor cable has no bent
pins on the connect side. If yes, repair or
replace the cable.
• The Energy Saving feature may be activated
Screen says
Attention
Check cable connection
• Make sure the monitor cable is properly
connected to your computer. (Also refer to
the Quick Start Guide).
• Check to see if the monitor cable has bent
pins.
• Make sure the computer is turned on.
AUTO button doesn't function
• The auto function is applicable only in
VGA-Analog mode. If the result is not
satisfactory, you can do manual adjustments
via the OSD menu.
Note
The Auto Function is not applicable in DVI-
Digital mode as it is not necessary.
Visiblesignsofsmokeorsparks
• Do not perform any troubleshooting steps
• Disconnect the monitor from mains power
source immediately for safety
• Contact with Philips customer service
representative immediately.
Imaging Problems
Image is not centered
• Adjust the image position using the “Auto”
function in OSD Main Controls.
• Adjust the image position using the Phase/
Clock of Setup in OSD Main Controls. It is
valid only in VGA mode.
Image vibrates on the screen
• Check that the signal cable is properly
securely connected to the graphics board
or PC.
Verticalickerappears
• Adjust the image using the “Auto” function
in OSD Main Controls.
• Eliminate the vertical bars using the Phase/
Clock of Setup in OSD Main Controls. It is
valid only in VGA mode.
Horizontalickerappears
• Adjust the image using the “Auto” function
in OSD Main Controls.
• Eliminate the vertical bars using the Phase/
Clock of Setup in OSD Main Controls. It is
valid only in VGA mode.
28
9. Troubleshooting & FAQs
Imageappearsblurred,indistinctortoodark
• Adjust the contrast and brightness on
On-Screen Display.
An "after-image", "burn-in" or "ghost image"
remains after the power has been turned off.
• Uninterrupted display of still or static
images over an extended period may cause
"burn in", also known as "after-imaging "
or "ghost imaging", on your screen. "Burn-
in", "after-imaging", or "ghost imaging" is a
well-known phenomenon in monitor panel
technology. In most cases, the "burned in"
or "after-imaging" or "ghost imaging" will
disappear gradually over a period of time
after the power has been switched off.
• Always activate a moving screen saver
program when you leave your monitor
unattended.
• Always activate a periodic screen refresh
application if your monitor will display
unchanging static content.
• Failure to activate a screen saver, or a
periodic screen refresh application may
result in severe “burn-in” or “after-image”
or “ghost image” symptoms that will not
disappear and cannot be repaired. The
damage mentioned above is not covered
under your warranty.
Image appears distorted. Text is fuzzy or
blurred.
• Set the PC’s display resolution to the same
mode as monitor’s recommended screen
native resolution.
Green,red,blue,dark,andwhitedotsappears
on the screen
• The remaining dots are normal
characteristic of the liquid crystal used in
today’s technology, Please refer the pixel
policy for more detail.
The "power on" light is too strong and is
disturbing
• You can adjust “power on” light using the
power LED Setup in OSD main Controls.
Audio problem
No sound
• Check if audio cable is connected to PC
and monitor correctly.
• Ensure audio is not muted. Press OSD
“Menu”, select “Audio” then “Mute”. Check
it on “Off ” position.
• Press “Volume” in OSD main control to
adjust the volume.
USB problem
USBperipheralsarenotworking
• Check if USB upstream cable is connected
to your monitor correctly.
• Turn your monitor OFF and ON once
again. You may need to install/reinstall USB
drivers in your PC and ensure hub is active.
• Reconnect your USB peripherals.
For further assistance, refer to the Consumer
Information Centers list and contact Philips
customer service representative.
9.2 General FAQs
Q1: When I install my monitor what should
I do if the screen shows 'Cannot
displaythisvideomode'?
Ans.: Recommended resolution for this
monitor: 2560 x 1440 @ 60 Hz.
• Unplug all cables, then connect your PC to
the monitor that you used previously.
• In the Windows Start Menu, select Settings/
Control Panel. In the Control Panel
Window, select the Display icon. Inside the
Display Control Panel, select the 'Settings'
tab. Under the setting tab, in box labelled
'desktop area', move the sidebar to 2560 x
1440 pixels.
• Open 'Advanced Properties' and set the
Refresh Rate to 60 Hz, then click OK.
• Restart your computer and repeat step 2
and 3 to verify that your PC is set at 2560
x 1440 @ 60 Hz.
29
9. Troubleshooting & FAQs
• Shut down your computer, disconnect your
old monitor and reconnect your Philips
monitor.
• Turn on your monitor and then turn on
your PC.
Q2: What is the recommended refresh
rateformonitor?
Ans.: Recommended refresh rate in monitors
is 60 Hz, In case of any disturbance on
screen, you can set it up to 75 Hz to
see if that removes the disturbance.
Q3: Whatarethe.infand.icmleson
theusermanual?HowdoIinstallthe
drivers(.infand.icm)?
Ans.: These are the driver les for your
monitor. Follow the instructions in your
user manual to install the drivers. Your
computer may ask you for monitor
drivers (.inf and .icm les) or a driver
disk when you rst install your monitor.
Q4: HowdoIadjusttheresolution?
Ans.: Your video card/graphic driver and
monitor together determine the
available resolutions. You can select the
desired resolution under Windows®
Control Panel with the "Display
properties".
Q5: WhatifIgetlostwhenIammaking
monitoradjustmentsviaOSD?
Ans.: Simply press the button, then select
[Reset to recall all the original factory
settings.
Q6: Is the monitor screen resistant to
scratches?
Ans.: In general it is recommended that
the panel surface is not subjected to
excessive shocks and is protected from
sharp or blunt objects. When handling
the monitor, make sure that there is
no pressure or force applied to the
panel surface side. This may affect your
warranty conditions.
Q7: How should I clean the monitor
surface?
Ans.: For normal cleaning, use a clean, soft
cloth. For extensive cleaning, please use
isopropyl alcohol. Do not use other
solvents such as ethyl alcohol, ethanol,
acetone, hexane, etc.
Q8: Can I change the color setting of my
monitor?
Ans.: Yes, you can change your color setting
through OSD control as the following
procedures:
• Press button to show the OSD (On
Screen Display) menu
• Press ▼ button to select the option
[Color] then press button to enter
color setting, there are three settings as
below.
1. Color Temperature: The six settings are
5000K, 6500K, 7500K, 8200K, 9300K
and 11500K. With settings in the 5000K
range the panel appears "warm, with a
red-white color tone", while a 11500K
temperature yields "cool, bluewhite
toning".
2. sRGB: This is a standard setting for
ensuring correct exchange of colors
between different device (e.g. digital
cameras, monitors, printers, scanners,
etc).
3. User Dene: The user can choose his/
her preference color setting by adjusting
red, green blue color.
Note
A measurement of the color of light radiated
by an object while it is being heated. This
measurement is expressed in terms of
absolute scale, (degrees Kelvin). Lower Kevin
temperatures such as 2004K are red; higher
temperatures such as 9300K are blue. Neutral
temperature is white, at 6504K.
30
9. Troubleshooting & FAQs
Q9: Can I connect my monitor to any PC,
workstationorMac?
Ans.: Yes. All Philips monitors are fully
compatible with standard PCs, Macs
and workstations. You may need a cable
adapter to connect the monitor to
your Mac system. Please contact your
Philips sales representative for more
information.
Q10: ArePhilipsmonitorsPlug-and-Play?
Ans.: Yes, the monitors are Plug-and-Play
compatible with Windows 10/Windows
8.1/Windows 8/Windows 7, Mac OSX.
Q11: WhatisImageSticking,orImageBurn-
in, or After Image, or Ghost Image in
monitorpanels?
Ans.: Uninterrupted display of still or static
images over an extended period
may cause "burn in", also known as
"after-imaging" or "ghost imaging",
on your screen. "Burn-in", "after-
imaging", or "ghost imaging" is a well-
known phenomenon in monitor panel
technology. In most cases, the "burned
in" or "atter-imaging" or "ghost imaging"
will disappear gradually over a period of
time after the power has been switched
off.
Always activate a moving screen saver
program when you leave your monitor
unattended.
Always activate a periodic screen
refresh application if your monitor will
display unchanging static content.
Warning
Failure to activate a screen saver, or a periodic
screen refresh application may result in severe
“burn-in” or “after-image” or “ghost image”
symptoms that will not disappear and cannot be
repaired. The damage mentioned above is not
covered under your warranty.
Q12: Why is my Display not showing
sharp text, and is displaying jagged
characters?
Ans.: Your monitor works best at its native
resolution of 2560 x 1440 @ 60 Hz. For
best display, please use this resolution.
31
9. Troubleshooting & FAQs
9.3 Multiview FAQs
Q1: Why I cannot activate PIP or PBP
when the sources are DVI and MHL-
HDMI?
Ans.: Please refer to below table for the main
source and its supporting sub source.
SUB SOURCE POSSIBILITY (xl)
Inputs VGA DP DVI MHL-
HDMI
MAIN
SOURCE
(xl)
VGA ● ● ●
DP ● ● ●
DVI ● ● ●
MHL-
HDMI ● ● ●
Q2: CanIenlargethePIPsubwindow?
Ans.: Yes, there are 3 sizes to select: [Small],
[Middle], [Large]. You can press to
enter OSD menu. Select your preferred
[PIP Size] option from the [PIP / PBP]
main menu.
Q3: How to listen to Audio, independent
ofvideo?
Ans.: Normally the audio source is linked to
the main picture source. If you want to
change audio-source input (for example:
listen to your MP3 player independently
regardless of the video source input),
you can press to enter OSD menu.
Select your preferred [Audio Source]
option from the [Audio] main menu.
Please note that the next time you
turn on your monitor, the monitor will
by default select the audio source you
chose last time. In case you want to
change it again, you need to go through
the above steps to select your new
preferred audio source, which then will
become the “default” mode.
MHL-HDMI
DisplayPort
Audio in
Audio Source
U
©2016KoninklijkePhilipsN.V.Allrightsreserved.
PhilipsandthePhilipsShieldEmblemareregisteredtrademarksof
KoninklijkePhilipsN.V.andareusedunderlicensefrom
KoninklijkePhilipsN.V.
Specicationsaresubjecttochangewithoutnotice.
Version: M4272SE2T