Table of Contents
Philips 328P6AUBREB/00 User Manual
Displayed below is the user manual for 328P6AUBREB/00 by Philips which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Table of Contents
1. Important ...................................... 1
1.1 Safety precautions and
maintenance ................................. 1
1.2 Notational Descriptions ............ 3
1.3 Disposal of product and packing
material .......................................... 4
2. Setting up the display ............... 5
2.1 Installation .................................... 5
2.2 Operating the display .................7
2.3 Remove the Base Assembly for
VESA Mounting ..........................10
3. Image Optimization ................... 11
3.1 SmartImage ..................................11
3.2 SmartContrast ............................. 12
4. HDR .............................................. 13
5. Technical Specications ..........14
5.1 Resolution & Preset Modes .... 17
6. Power Management .................18
7. Customer care and warranty ..19
7.1 Philips’ Flat Panel Displays Pixel
Defect Policy ............................... 19
7.2 Customer Care & Warranty ..... 22
8. Troubleshooting & FAQs ......... 23
8.1 Troubleshooting ........................ 23
8.2 General FAQs ............................. 24
1
1. Important
1. Important
This electronic user’s guide is intended
for anyone who uses the Philips display.
Take time to read this user’s manual
before you use your display. It contains
important information and notes
regarding the operation of your display.
The Philips guarantee applies provided
the product is handled properly for
its intended use, in accordance with
its operating instructions and upon
presentation of the original invoice
or cash receipt, indicating the date of
purchase, dealer’s name and model and
production number of the product.
1.1 Safety precautions and
maintenance
Warnings
Use of controls, adjustments or
procedures other than those specified
in this documentation may result in
exposure to shock, electrical hazards
and/or mechanical hazards.
Read and follow these instructions
when connecting and using your
computer display.
Operation
• Please Keep the monitor out of
direct sunlight, very strong bright
lights and away from any other heat
source. Lengthy exposure to this
type of environment may result in
discoloration and damage to the
monitor.
• Remove any object that could fall
into ventilation holes or prevent
proper cooling of the monitor’s
electronics.
• Do not block the ventilation holes
on the cabinet.
• When positioning the monitor, make
sure the power plug and outlet are
easily accessible.
• If turning off the monitor by
detaching the power cable or DC
power cord, wait for 6 seconds
before attaching the power cable or
DC power cord for normal operation.
• Please use approved power cord
provided by Philips all the time. If
your power cord is missing, please
contact with your local service
center. (Please refer to Service
contact information listed in
Important information manual.)
• Operate under the specified power
supply. Be sure to operate the
monitor only with the specified
power supply. Use of an incorrect
voltage will cause malfunction and
may cause fire or electric shock.
• Protect the cable. Do not pull or
bend the power cable and signal
cable. Do not place the monitor
or any other heavy objects on the
cables, if damaged, the cables may
cause fire or electric shock.
• Do not subject the monitor to severe
vibration or high impact conditions
during operation.
• Do not knock or drop the monitor
during operation or transportation.
• Excessive usage of monitor can
cause eye discomfort, it’s better to
take shorter breaks more often at
your workstation than longer breaks
and less often; for example a 5-10
minute break after 50-60-minute
continuous screen use is likely to
be better than a 15-minute break
every two hours. Try to keep your
eyes from eye strain while using the
screen for a constant period of time
by :
2
1. Important
• Looking at something varying
distances after a long period
focusing on the screen.
• Conscious Blinking often while
you work.
• Gently closing and rolling your
eyes to relax.
• Reposition your screen to ap-
propriate height and angle ac-
cording to your height.
• Adjusting the brightness and
contrast to appropriate level.
• Adjusting the environment light-
ing similar to that of your screen
brightness, avoid the uorescent
lighting, and surfaces that don’t
reect too much light.
• Seeing a doctor if your symp-
toms.
• Maintenance
• To protect your display from
possible damage, do not put
excessive pressure on the LCD
panel. When moving your display,
grasp the frame to lift; do not lift
the display by placing your hand or
fingers on the LCD panel.
• Unplug the display if you are not
going to use it for an extensive
period of time.
• Unplug the display if you need to
clean it with a slightly damp cloth.
The screen may be wiped with a
dry cloth when the power is off.
However, never use organic solvent,
such as, alcohol, or ammonia-based
liquids to clean your display.
• To avoid the risk of shock or
permanent damage to the set, do
not expose the display to dust,
rain, water, or excessive moisture
environment.
• If your display gets wet, wipe it with
dry cloth as soon as possible.
• If foreign substance or water gets in
your display, please turn the power
off immediately and disconnect
the power cord. Then, remove the
foreign substance or water, and
send it to the maintenance center.
• Do not store or use the display in
locations exposed to heat, direct
sunlight or extreme cold.
• In order to maintain the best
performance of your display and use
it for a longer lifetime, please use
the display in a location that falls
within the following temperature
and humidity ranges.
• Temperature: 0-40°C 32-104°F
• Humidity: 20-80% RH
Important information for Burn-in/
Ghost image
• Always activate a moving screen
saver program when you leave
your display unattended. Always
activate a periodic screen refresh
application if your display will
display unchanging static content.
Uninterrupted display of still or
static images over an extended
period may cause “burn in”, also
known as “after-imaging” or “ghost
imaging”, on your screen.
• “Burn-in”, “after-imaging”, or
“ghost imaging” is a well-known
phenomenon in LCD panel
technology. In most cases, the
“Burn-in” or “after-imaging” or
“ghost imaging” will disappear
gradually over a period of time after
the power has been switched off.
Warning
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or “after-
image” or “ghost image” symptoms
that will not disappear and cannot be
3
1. Important
repaired. The damage mentioned above
is not covered under your warranty.
Service
• The casing cover should be opened
only by qualified service personnel.
• If there is any need for any
document for repair or integration,
please contact with your local
service center. (please refer to
Service contact information listed in
Important information manual.)
• For transportation information,
please refer to “Technical
Specifications”.
• Do not leave your display in a car/
trunk under direct sun light.
Note
Consult a service technician if the
display does not operate normally, or
you are not sure what procedure to take
when the operating instructions given in
this manual have been followed.
1.2 Notational Descriptions
The following subsections describe
notational conventions used in this
document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text
may be accompanied by an icon and
printed in bold or italic type. These
blocks contain notes, cautions or
warnings. They are used as follows:
Note
This icon indicates important
information and tips that help you make
better use of your computer system.
Caution
This icon indicates information that
tells you how to avoid either potential
damage to hardware or loss of data.
Warning
This icon indicates the potential for
bodily harm and tells you how to avoid
the problem.
Some warnings may appear in alternate
formats and may not be accompanied
by an icon. In such cases, the specific
presentation of the warning is mandated
by the relevant regulatory authority.
4
1. Important
1.3 Disposal of product and
packing material
Waste Electrical and Electronic
Equipment-WEEE
This marking on the product or on
its packaging illustrates that, under
European Directive 2012/19/EU
governing used electrical and electronic
appliances, this product may not be
disposed of with normal household
waste. You are responsible for disposal
of this equipment through a designated
waste electrical and electronic
equipment collection. To determine the
locations for dropping off such waste
electrical and electronic, contact your
local government office, the waste
disposal organization that serves your
household or the store at which you
purchased the product.
Your new display contains materials that
can be recycled and reused. Specialized
companies can recycle your product
to increase the amount of reusable
materials and to minimize the amount
to be disposed of.
All redundant packing material has been
omitted. We have done our utmost to
make the packaging easily separable
into mono materials.
Please find out about the local
regulations on how to dispose of your
old display and packing from your sales
representative.
Taking back/Recycling Information for
Customers
Philips establishes technically and
economically viable objectives
to optimize the environmental
performance of the organization's
product, service and activities.
From the planning, design and
production stages, Philips emphasizes
the important of making products that
can easily be recycled. At Philips,
end-of-life management primarily
entails participation in national take-
back initiatives and recycling programs
whenever possible, preferably
in cooperation with competitors,
which recycle all materials (products
and related packaging material) in
accordance with all Environmental
Laws and taking back program with the
contractor company.
Your display is manufactured with high
quality materials and components
which can be recycled and reused.
To learn more about our recycling
program please visit
http://www.philips.com/a-w/about/
sustainability.html
5
2. Setting up the monitor
2. Setting up the display
2.1 Installation
Package contents
*USB C-C/A * VGA
* HDMI * Audio
Power Cord
* DP
* CD
©
2
0
1
8
K
o
n
i
n
k
l
i
j
k
e
P
h
i
l
i
p
s
N
.
V
.
A
l
l
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
U
n
a
u
t
h
o
r
i
z
e
d
d
u
p
l
i
c
a
t
i
o
n
i
s
a
v
i
o
l
a
t
i
o
n
o
f
a
p
p
l
i
c
a
b
l
e
l
a
w
s
.
M
a
d
e
a
n
d
p
r
i
n
t
e
d
i
n
C
h
i
n
a
.
V
e
r
s
i
o
n
This product has been manufactured by and is sold
under the responsibility of Top Victory Investments Ltd.,
and Top Victory Investments Ltd. is the warrantor in
relation to this product. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips
N.V. and are used under license.
Contents:
Monitor drivers
User’s Manual
User’s Manual
www.philips.com/welcome
使用产品前请阅读使用说明
保留备用
Display
Register your product and get support at
www.philips.com/welcome
Quick
Start
Brilliance
328P6
USB C-C* *USB C-A
*Different according to region.
Install the base
1. Place the display face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the neck with both hands.
(1) Gently attach the neck to the
VESA mount area until the latch
locks the neck.
(2) Use a screwdriver to tighten the
assembly screws, and secure the
neck to the display tightly.
(3) Use your fingers to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
3
1
2
6
2. Setting up the monitor
Connecting to your PC
1
10
6 5 4
9 8 7 3 2
11
USB CC
USB AC
USB C
USB C
OR
1 Kensington anti-theft lock
2 Earphone jack
3 Audio input
4 RJ-45 input
5 USB fast charger
6 USB Type C input/Upstream
7 VGA input
8 Display port input
9 HDMI HDR input
10 AC power input
11 Power Switch
Connect to PC
1. Connect the power cord to the back
of the display firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the display signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your display into a
nearby outlet.
5. Turn on your computer and display.
If the display displays an image,
installation is complete.
4 USB C driver installation for RJ45
Before using the USB C docking display,
please ensure to install the USB C
driver.
You can find the “LAN Drivers” from CD
disk if bundled or directly download
using the link below:
https://www.realtek.com/zh-tw/
component/zoo/category/network-
interface-controllers-10-100-1000m-
gigabit-ethernet-usb-3-0-software
Please follow the steps for the
installation:
1. Install the LAN driver that matches
your system.
2. Double click driver to install, and
follow Window’s instructions to
proceed with installation.
3. It will show “success” when the
installation is finished.
4. You must reboot your computer
after the installation has completed.
5. Now you will be able to see
“Realtek USB Ethernet Network
Adapter” from your program
installed list.
6. We recommend to periodically visit
the above web link to check for the
availability of the most updated
driver.
7
2. Setting up the monitor
5 USB charging
This display has USB ports capable of
standard power output including some
with USB Charging function (identifiable
with power icon ). You can use these
ports to charge your Smart phone or
power your external HDD, for example.
The display must be powered ON at all
times to be able to use this function.
Some select Philips displays may not
Power or Charge your device when it
enters to “Sleep” mode (White power
LED blinking). In that case, please enter
to OSD Menu and select “USB Fast
Charging ”, then, turn the function to
“ON” mode (default=OFF). This will
then keep the USB power and charging
functions active even when the monitor
is in sleep mode.
Resolution Notification
Reset
Information
Off
On
USB Fast Charging
Note
If you Turn OFF your monitor via the
power switch at any given time, all the
USB ports will power OFF.
2.2 Operating the display
Description of the control buttons
5 4
3
21
76
Switch display’s power ON
or OFF.
Access the OSD menu
.
Confirm the OSD
adjustment.
Adjust the OSD menu.
Adjust the brightness level.
Change the signal input
source.
Return to previous OSD
level.
SmartImage hot key. There
are multiple modes to
select: EasyRead, Office,
Photo, Movie, Game,
Economy, LowBlue Mode,
SmartUniformity, Off.
8
2. Setting up the monitor
Description of the On Screen Display
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in
all Philips LCD displays. It allows an end
user to adjust screen performance or
select functions of the displays directly
through an on-screen instruction
window. A user friendly on screen
display interface is shown as below:
√
√
TXT
Basic and simple instruction on the
control keys
In the OSD shown above, you can press
buttons at the front bezel of the
display to move the cursor, and press
OK button to confirm the choice or
change.
The OSD Menu
Below is an overall view of the structure
of the On-Screen Display. You can use
this as a reference when you want to
work your way around the different
adjustments later on.
Main menu Sub menu
Picture
OSD Settings
Setup
Language
Color
Input
LowBlue Mode
Audio
Horizontal
Vertical
Transparency
OSD Time Out
Auto
V. Position
Phase
Clock
Color Temperature
sRGB
Adobe RGB
User Dene
H. Position
Resolution Notication
Reset
Information
USB Fast Charging
SmartResponse
Picture Format
HDR
SmartContrast
Gamma
Pixel Orbiting
Over Scan
Contrast
Brightness
Volume
Mute
Audio Source
Stand-Alone
HDMI 2.0
DisplayPort
USB C
VGA
On
O
0~100
0~100
O, 1, 2, 3, 4
5s, 10s, 20s, 30s, 60s
0~100
0~100
0~100
Native, 5000K, 6500K, 7500K,
8200K, 9300K, 11500K
Red: 0~100
Green: 0~100
Blue: 0~100
0~100
On, O
Yes, No
On, O
0~100
On, O
On, O
0~100
On, O
Audio in, HDMI, DisplayPort, USB C
O, Fast, Faster, Fastest
On, O
1.8, 2.0, 2.2, 2.4, 2.6
0~100
Wide screen, 4:3, 1:1
Auto, O
1, 2, 3
On, O
English, Deutsch, Español, Ελληνική, Français, Italiano,
Maryar, Nederlands, Português, Português do Brasil,
Polski, Русский, Svenska, Suomi, Türkçe, Čeština,
Українська,
简体中文, 繁體中文, 日本語, 한국어
Sharpness 0~100
Resolution notification
This display is designed for optimal
performance at its native resolution,
2560 x 1440 @ 60 Hz. When the display
is powered on at a different resolution,
an alert is displayed on screen: Use
2560 x 1440 @ 60 Hz for best results.
9
2. Setting up the monitor
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
Tilt
20˚
-5˚
Swivel
+170˚
-170˚
Height adjustment
180mm
Pivot
90˚
0˚
10
2. Setting up the monitor
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the display face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Loosen the assembly screws, then
detach the neck from the display.
1
2
Note
This display accepts a 100mm x 100mm
VESA-Compliant mounting interface.
100mm
100mm
11
3. Image Optimization
3. Image Optimization
3.1 SmartImage
What is it?
SmartImage provides presets that
optimize display for different types
of content, dynamically adjusting
brightness, contrast, color and sharpness
in real time. Whether you're working
with text applications, displaying images
or watching a video, Philips SmartImage
delivers great optimized display
performance.
Why do I need it?
You want a display that delivers
optimized display all your favorite
types of content, SmartImage software
dynamically adjust brightness,
contrast, color and sharpness in real
time to enhance your display viewing
experience.
How does it work?
SmartImage is an exclusive, leading
edge Philips technology that analyzes
the content displayed on your screen.
Based on a scenario you select,
SmartImage dynamically enhances the
contrast, color saturation and sharpness
of images to enhance the contents
being displayed - all in real time with
the press of a single button.
How to enable SmartImage?
1. Press to launch the SmartImage
on screen display.
2. Keep pressing to toggle among
Office, Photo, Movie, Game,
Economy, SmartUniformity and Off.
3. The SmartImage on screen display
will remain on screen for 5 seconds,
or you can also press "OK" to make
confirmation.
There are multiple modes to select:
EasyRead, Office, Photo, Movie,
Game, Economy, LowBlue Mode,
SmartUniformity and Off.
Photo
Movie
Game
Economy
SmartUniformity
LowBlue Mode
ff
Office
EasyRead
SmartImage
• EasyRead: Helps improve reading
of text based application like PDF
ebooks. By using a special algorithm
which increases the contrast and
boundary sharpness of text content,
the display is optimized for a
stress-free reading by adjusting
the brightness, contrast and color
temperature of the monitor.
• Office: Enhances text and dampens
brightness to increase readability
and reduce eye strain. This mode
significantly enhances readability
and productivity when you’re
working with spreadsheets, PDF
files, scanned articles or other
general office applications.
• Photo: This profile combines color
saturation, dynamic contrast and
12
3. Image Optimization
sharpness enhancement to display
photos and other images with
outstanding clarity in vibrant colors
- all without artifacts and faded
colors.
• Movie: Ramped up luminance,
deepened color saturation, dynamic
contrast and razor sharpness
displays every details in darker
areas of your videos without
color washout in brighter areas
maintaining a dynamic natural
values for the ultimate video display.
• Game: Turn on over drive circuit for
best response time, reduce jaggy
edges for fast moving objects on
screen, enhance contrast ratio for
bright and dark scheme, this profile
delivers the best gaming experience
for gamers.
• Economy: Under this profile,
brightness, contrast are adjusted
and backlighting finetuned for just
right display of everyday office
applications and lower power
consumption.
• LowBlue Mode: LowBlue Mode
for easy on-the-eyes productivity
Studies have shown that just as
ultra-violet rays can cause eye
damage, shortwave length blue light
rays from LED displays can cause
eye damage and affect vision over
time. Developed for wellbeing,
Philips LowBlue Mode setting uses a
smart software technology to reduce
harmful shortwave blue light.
• SmartUniformity: Fluctuations in
brightness and color on different
parts of a screen are a common
phenomenon among LCD displays.
Typical uniformity is measured
around 75-80%. By enabling Philips
SmartUniformity feature, display
uniformity is increased to above
95%. This produces more consistent
and true images.
• Off: No optimization by SmartImage.
Note
Philips LowBlue mode, mode 2
compliance with TUV Low Blue Light
certification, you can have this mode by
simply press the hotkey , then press
to select LowBlue Mode, see above
SmartImage selection steps.
3.2 SmartContrast
What is it?
Unique technology that dynamically
analyzes displayed content and
automatically optimizes a Display's
contrast ratio for maximum visual clarity
and viewing enjoyment, stepping up
backlighting for clearer, crisper and
brighter images or dimming backlighting
for clear display of images on dark
backgrounds.
Why do I need it?
You want the very best visual clarity
and viewing comfort for every type of
content. SmartContrast dynamically
controls contrast and adjusts
backlighting for clear, crisp, bright
gaming and video images or displays
clear, readable text for office work.
By reducing your display's power
consumption, you save on energy costs
and extend the lifetime of your display.
How does it work?
When you activate SmartContrast, it will
analyse the content you are displaying
in real time to adjust colors and control
backlight intensity. This function will
dynamically enhance contrast for a great
entertainment experience when viewing
videos or playing games.
13
4. HDR
4. HDR
It is compatible with input signals in
HDR10 format.
The display may automatically activate
the HDR function if the player and
content are compatible. Please contact
the device manufacturer and the
content provider for information on
the compatibility of your device and
content. Please select “OFF” for the
HDR function when you have no need
for automatical activation function.
Note
1. No special setting is needed for the
DisplayPort/HDMI interface in WIN10
versions lower (older) than V1703.
2. Only the HDMI interface is available
and the DisplayPort interface cannot
function in WIN10 version V1703.
a. The display resolution is set to
2560*1440, and HDR is preset
to ON. Under these conditions,
the screen may slightly dim,
indicating HDR has been
activated.
b. After entering an application, the
best HDR effect can be achieved
when the resolution is changed
to 3840*2160 (if available).
2560 x 1440
14
5. Technical Specifications
5. Technical Specifications
Picture/Display
Display Panel Type IPS technology
Backlight W-LED system
Panel Size 31.5" W (80.1 cm)
Aspect Ratio 16:9
Pixel Pitch 0.2727 x 0.2727 mm
Contrast ratio (typical) 1200:1
Optimum Resolution VGA: 1920 x 1080 @ 60Hz
HDMI/DisplayPort/USB type-C: 2560 x 1440 @ 60Hz
Viewing Angle 178° (H) / 178° (V) @ C/R > 10 (Typ)
Picture Enhancement SmartImage
Display Colors 1.07G (8 bits + FRC)
Vertical Refresh Rate 50-76 Hz
Horizontal Frequency 30-99KHz(VGA/DP/USB type-C)
30-160KHz (HDMI)
sRGB YES
Color Gamut YES
HDR HDR-10 (HDMI)
Connectivity
Signal Input VGA( Analog) x 1, DisplayPort1.2 x 1, HDMI 2.0 x 1,
USB type-C x 1
USB Upstream: USB-C, Downstream: USB3.0x2 (2 w/fast
charging)
Power Delivery(USB C)
USB C(up to 65W)
(5V/3A, 7V/3A, 9V/3A, 10V/3A, 12V/3A, 15V/3A,
20V/3.25A)
RJ-45 YES
Input Signal Separate Sync, Sync on Green
Audio In/Out PC audio-in,headphone out
Convenience
Built-in speaker 3 W x 2
User Convenience
OSD Languages
English, German, Spanish, Greek, French, Italian,
Hungarian, Dutch, Portuguese, Brasil Portuguese, Polish,
Russian, Swedish, Finnish, Turkish, Czech, Ukranian,
Simplified Chinese, Traditional Chinese, Japanese,
Korean
Other Convenience VESA mount(100×100mm), Kensington Lock
Plug & Play Compatibility DDC/CI, Mac OS X, sRGB, Windows 10/8.1/8/7
15
5. Technical Specifications
Stand
Tilt -5 / +20 degree
Swivel -170 / +170 degree
Height adjustment 180mm
Pivot 90 degree
Power
Consumption
AC Input
Voltage at
100VAC , 50Hz
AC Input
Voltage at
115VAC , 60Hz
AC Input
Voltage at
230VAC, 50Hz
Normal Operation 67.90W (typ.) 68.00W (typ.) 68.10W (typ.)
Sleep (Standby) <0.5W(typ.) <0.5W (typ.) <0.5W(typ.)
Off <0.3W(typ.) <0.3W(typ.) <0.3W(typ.)
Off (AC switch) 0W(typ.) 0W(typ.) 0W(typ.)
Heat Dissipation*
AC Input
Voltage at
100VAC , 50Hz
AC Input
Voltage at
115VAC , 60Hz
AC Input
Voltage at
230VAC , 50Hz
Normal Operation 231.74 BTU/hr
(typ.)
232.08 BTU/hr
(typ.)
232.42 BTU/hr
(typ.)
Sleep (Standby) <1.71 BTU/
hr(typ.)
<1.71 BTU/
hr(typ.)
<1.71 BTU/
hr(typ.)
Off <1.02 BTU/
hr(typ.)
<1.02 BTU/
hr(typ.)
<1.02 BTU/
hr(typ.)
Off (AC switch) 0 BTU/hr(typ.) 0 BTU/hr(typ.) 0 BTU/hr(typ.)
On Mode(ECO mode) 31.9W (typ.)
Power LED indicator On mode: White, Standby/Sleep mode: White
(blinking)
Power Supply Built-in, 100-240V AC, 50-60Hz
Dimensions
Product with stand
(WxHxD) 742 x 657 x 270 mm
Product without stand
(WxHxD) 742 x 438 x 63 mm
Product with packaging
(WxHxD) 970 x 526 x 224 mm
Weight
Product with stand 9.700 kg
Product without stand 6.740 kg
Product with packaging 13.864 kg
Operating Condition
Temperature range
(operation) 0°C to 40 °C
Relative humidity
(operation) 20% to 80%
16
5. Technical Specifications
Atmospheric pressure
(operation) 700 to 1060hPa
Temperature range
(Non-operation) -20°C to 60°C
Relative humidity
(Non-operation) 10% to 90%
Atmospheric pressure
(Non-operation) 500 to 1060hPa
Environmental and energy
ROHS YES
Packaging 100% recyclable
Specific Substances 100% PVC BFR free housing
Cabinet
Color Black
Finish Texture
Note
1. This data is subject to change without notice. Go to www.philips.com/support to
download the latest version of leaflet.
2. Power delivery function will base on laptop's capability.
17
5. Technical Specifications
5.1 Resolution & Preset Modes
Maximum Resolution
1920 x 1080 @ 60 Hz (analog input)
2560 x 1440 @ 60 Hz (Type-C input)
2560 x 1440 @ 75 Hz
(HDMI/DP input)
Recommended Resolution
2560 x 1440 @ 60 Hz (digital input)
H. freq
(kHz)
Resolution V. freq (Hz)
31.47 720 x 400 70.09
31.47 640 x 480 59.94
35.00 640 x 480 66.67
37.86 640 x 480 72.81
37.50 640 x 480 75.00
37.88 800 x 600 60.32
46.88 800 x 600 75.00
48.36 1024 x 768 60.00
60.02 1024 x 768 75.03
44.77 1280x 720 59.86
63.89 1280 x 1024 60.02
79.98 1280 x 1024 75.03
55.94 1440 x 900 59.89
70.64 1440 x 900 74.98
65.29 1680 x 1050 59.95
67.50 1920 x 1080 60.00
74.56 1920 x 1200 59.89
66.64 2560 x 1080 59.98
88.79 2560 x 1440 59.95
67.50 2560 x 1440 30.00
88.79 2560 x 1440 60.00
111.03 2560 x 1440 75.00
133.29 1920 x 2160
PBP mode
59.99
Note
Please notice that your display works
best at native resolution of 2560 x 1440
@ 60Hz. For best display quality, please
follow this resolution recommendation.
18
6. Power Management
6. Power Management
If you have VESA DPM compliance
display card or software installed in
your PC, the display can automatically
reduce its power consumption when
not in use. If an input from a keyboard,
mouse or other input device is detected,
the display will 'wake up' automatically.
The following table shows the power
consumption and signaling of this
automatic power saving feature:
Power Management Definition
VESA
Mode Video H-sync V-sync Power Used LED
Color
Active ON Yes Yes 68W (typ.)
166W (max.) White
Sleep
(Standby) OFF No No <0.5W (typ.) White
(blink)
Switch
Off OFF - - <0.3W (typ.) OFF
The following setup is used to measure
power consumption on this display.
• Native resolution: 2560 x 1440
• Contrast: 50%
• Brightness: 100%
• Color temperature: 6500k with full
white pattern
• Audio and USB Inactive (Off)
Note
This data is subject to change without
notice.
19
7. Customer care and warranty
7. Customer care and
warranty
7.1 Philips’ Flat Panel Displays
Pixel Defect Policy
Philips strives to deliver the highest
quality products. We use some of the
industry's most advanced manufacturing
processes and practice stringent quality
control. However, pixel or sub pixel
defects on the TFT Display panels used
in flat panel displays are sometimes
unavoidable. No manufacturer can
guarantee that all panels will be
free from pixel defects, but Philips
guarantees that any display with an
unacceptable number of defects will
be repaired or replaced under warranty.
This notice explains the different types
of pixel defects and defines acceptable
defect levels for each type. In order to
qualify for repair or replacement under
warranty, the number of pixel defects
on a TFT Display panel must exceed
these acceptable levels. For example,
no more than 0.0004% of the sub
pixels on a display may be defective.
Furthermore, Philips sets even higher
quality standards for certain types or
combinations of pixel defects that are
more noticeable than others. This policy
is valid worldwide.
subpixel
pixel
Pixels and Sub pixels
A pixel, or picture element, is composed
of three sub pixels in the primary colors
of red, green and blue. Many pixels
together form an image. When all sub
pixels of a pixel are lit, the three colored
sub pixels together appear as a single
white pixel. When all are dark, the three
colored sub pixels together appear as a
single black pixel. Other combinations
of lit and dark sub pixels appear as
single pixels of other colors.
Types of Pixel Defects
Pixel and sub pixel defects appear on
the screen in different ways. There are
two categories of pixel defects and
several types of sub pixel defects within
each category.
Bright Dot Defects
Bright dot defects appear as pixels or
sub pixels that are always lit or 'on'. That
is, a bright dot is a sub-pixel that stands
out on the screen when the display
displays a dark pattern. There are the
types of bright dot defects.
One lit red, green or blue sub pixel.
Two adjacent lit sub pixels:
- Red + Blue = Purple
- Red + Green = Yellow
- Green + Blue = Cyan (Light Blue)
20
7. Customer care and warranty
Proximity of Pixel Defects
Because pixel and sub pixels defects
of the same type that are near to one
another may be more noticeable,
Philips also specifies tolerances for the
proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or
replacement due to pixel defects during
the warranty period, a TFT Display panel
in a Philips flat panel display must have
pixel or sub pixel defects exceeding the
tolerances listed in the following tables.
Three adjacent lit sub pixels (one white
pixel).
Note
A red or blue bright dot must be
more than 50 percent brighter than
neighboring dots while a green
bright dot is 30 percent brighter than
neighboring dots.
Black Dot Defects
Black dot defects appear as pixels or
sub pixels that are always dark or 'off'.
That is, a dark dot is a sub-pixel that
stands out on the screen when the
display displays a light pattern. These
are the types of black dot defects.
21
7. Customer care and warranty
BRIGHT DOT DEFECTS ACCEPTABLE LEVEL
1 lit subpixel 2
2 adjacent lit subpixels 1
3 adjacent lit subpixels (one white pixel) 0
Distance between two bright dot defects* >10mm
Total bright dot defects of all types 3
BLACK DOT DEFECTS ACCEPTABLE LEVEL
1 dark subpixel 5 or fewer
2 adjacent dark subpixels 2 or fewer
3 adjacent dark subpixels 0
Distance between two black dot defects* >10mm
Total black dot defects of all types 5 or fewer
TOTAL DOT DEFECTS ACCEPTABLE LEVEL
Total bright or black dot defects of all types 5 or fewer
Note
1 or 2 adjacent sub pixel defects = 1 dot defect
22
7. Customer care and warranty
7.2 Customer Care & Warranty
For warranty coverage information and additional support requirements valid for your
region, please visit www.philips.com/support website for details or contact your local
Philips Customer Care Center.
For Warranty Period please refer to Warranty Statement in Important Information
Manual” as below on item Customer care and Warranty.
For extended warranty, if you would like to extend your general warranty period, an
Out of Warranty service package is offered via our Certified Service Center.
If you wish to make use of this service, please be sure to purchase the service within 30
calendar days of your original purchase date. During the extended warranty period, the
service includes pickup, repair and return service, however the user will be responsible
for all costs accrued.
If the Certified Service Partner cannot perform the required repairs under the offered
extended warranty package, we will find alternative solutions for you, if possible, up to
the extended warranty period you have purchased.
Please contact our Philips Customer Service Representative or local contact center (by
Consumer care number) for more details.
Philips Customer Care Center number listed below.
• Local
Standard
Warranty
Period
• Extended Warranty
Period
• Total Warranty Period
• Depend
on different
Regions
• + 1 Year • Local Standard warranty period +1
• + 2 Years • Local Standard warranty period
+2
• + 3 Years • Local Standard warranty period
+3
**Proof of original purchase and extended warranty purchase required.
Note
Please refer to important information manual for regional service hotline, which is
available on the Philips website support page.
23
8. Troubleshooting & FAQs
8. Troubleshooting &
FAQs
8.1 Troubleshooting
This page deals with problems that can
be corrected by a user. If the problem
still persists after you have tried these
solutions, contact Philips customer
service representative.
Common Problems
No Picture (Power LED not lit)
• Make sure the power cord is
plugged into the power outlet and
into the back of the display.
• First, ensure that the power button
on the front of the display is in the
OFF position, then press it to the
ON position.
No Picture (Power LED is White)
• Make sure the computer is turned
on.
• Make sure the signal cable is
properly connected to your
computer.
• Make sure the display cable has no
bent pins on the connect side. If
yes, repair or replace the cable.
• The Energy Saving feature may be
activated
Screen says
• Make sure the display cable
is properly connected to your
computer. (Also refer to the Quick
Start Guide).
• Check to see if the display cable has
bent pins.
• Make sure the computer is turned
on.
AUTO button doesn't function
• The auto function is applicable only
in VGA-Analog mode. If the result is
not satisfactory, you can do manual
adjustments via the OSD menu.
Note
The Auto Function is not applicable in
DVI-Digital mode as it is not necessary.
Visible signs of smoke or sparks
• Do not perform any troubleshooting
steps
• Disconnect the display from mains
power source immediately for safety
• Contact with Philips customer
service representative immediately.
Imaging Problems
Image is not centered
• Adjust the image position using
the “Auto” function in OSD Main
Controls.
• Adjust the image position using
the Phase/Clock of Setup in OSD
Main Controls. It is valid only in VGA
mode.
Image vibrates on the screen
• Check that the signal cable is
properly securely connected to the
graphics board or PC.
Vertical flicker appears
• Adjust the image using the “Auto”
function in OSD Main Controls.
• Eliminate the vertical bars using
the Phase/Clock of Setup in OSD
Main Controls. It is valid only in VGA
mode.
24
8. Troubleshooting & FAQs
Horizontal flicker appears
• Adjust the image using the “Auto”
function in OSD Main Controls.
• Eliminate the vertical bars using
the Phase/Clock of Setup in OSD
Main Controls. It is valid only in VGA
mode.
Image appears blurred, indistinct or too
dark
• Adjust the contrast and brightness
on On-Screen Display.
An "after-image", "burn-in" or "ghost
image" remains after the power has
been turned off.
• Uninterrupted display of still or static
images over an extended period
may cause "burn in", also known as
"after-imaging " or "ghost imaging",
on your screen. "Burn-in", "after-
imaging", or "ghost imaging" is a
well-known phenomenon in LCD
panel technology. In most cases,
the "Burn-in" or "after-imaging"
or "ghost imaging" will disappear
gradually over a period of time after
the power has been switched off.
• Always activate a moving screen
saver program when you leave your
display unattended.
• Always activate a periodic screen
refresh application if your LCD
display will display unchanging static
content.
• Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or
“after-image” or “ghost image”
symptoms that will not disappear
and cannot be repaired. The
damage mentioned above is not
covered under your warranty.
Image appears distorted. Text is fuzzy
or blurred.
• Set the PC’s display resolution
to the same mode as display’s
recommended screen native
resolution.
Green, red, blue, dark, and white dots
appears on the screen
• The remaining dots are normal
characteristic of the liquid crystal
used in today’s technology, Please
refer the pixel policy for more detail.
The "power on" light is too strong and
is disturbing
• You can adjust “power on” light
using the power LED Setup in OSD
main Controls.
For further assistance, refer to the
Service contact information listed in
Important information manual and
contact Philips customer service
representative.
*Functionality different according to
display.
8.2 General FAQs
Q1: When I install my display what
should I do if the screen shows
'Cannot display this video
mode'?
Ans.: Recommended resolution for this
display: 2560 x 1440 @ 60 Hz.
• Unplug all cables, then connect
your PC to the display that you used
previously.
• In the Windows Start Menu, select
Settings/Control Panel. In the
Control Panel Window, select the
Display icon. Inside the Display
Control Panel, select the 'Settings'
tab. Under the setting tab, in box
25
8. Troubleshooting & FAQs
labelled 'desktop area', move the
sidebar to 2560 x 1440 pixels.
• Open 'Advanced Properties' and set
the Refresh Rate to 60 Hz, then click
OK.
• Restart your computer and repeat
step 2 and 3 to verify that your PC is
set at 2560 x 1440 @ 60 Hz.
• Shut down your computer,
disconnect your old display and
reconnect your Philips LCD display.
• Turn on your display and then turn
on your PC.
Q2: What is the recommended
refresh rate for LCD display?
Ans.: Recommended refresh rate in
LCD displays is 60 Hz, In case of
any disturbance on screen, you
can set it up to 75 Hz to see if
that removes the disturbance.
Q3: What are the .inf and .icm files on
the CD-ROM? How do I install the
drivers (.inf and .icm)?
Ans.: These are the driver files for your
monitor. Follow the instructions
in your user manual to install the
drivers. Your computer may ask
you for monitor drivers (.inf and
.icm files) or a driver disk when
you first install your monitor.
Follow the instructions to
insert the companion CD-ROM
included in this package. Monitor
drivers (.inf and .icm files) will be
installed automatically.
Q4: How do I adjust the resolution?
Ans.: Your video card/graphic driver
and display together determine
the available resolutions. You
can select the desired resolution
under Windows® Control Panel
with the "Display properties".
Q5: What if I get lost when I am
making display adjustments via
OSD?
Ans.: Simply press the button,
then select 'Setup' > 'Reset' to
recall all of the original factory
settings.
Q6: Is the LCD screen resistant to
scratches?
Ans.: In general it is recommended
that the panel surface is not
subjected to excessive shocks
and is protected from sharp or
blunt objects. When handling the
display, make sure that there is
no pressure or force applied to
the panel surface side. This may
affect your warranty conditions.
Q7: How should I clean the LCD
surface?
Ans.: For normal cleaning, use a clean,
soft cloth. For extensive cleaning,
please use isopropyl alcohol. Do
not use other solvents such as
ethyl alcohol, ethanol, acetone,
hexane, etc.
Q8: Can I change the color setting of
my display?
Ans.: Yes, you can change your color
setting through OSD control as
the following procedures,
• Press "OK" to show the OSD (On
Screen Display) menu
• Press "Down Arrow" to select the
option "Color" then press "OK" to
enter color setting, there are three
settings as below.
1. Color Temperature: Native,
5000K, 6500K, 7500K, 8200K,
9300K and 11500K. With settings
in the 5000K range the panel
appears "warm, with a red-
white color tone", while a
26
8. Troubleshooting & FAQs
11500K temperature yields "cool,
bluewhite toning".
2. sRGB: This is a standard setting
for ensuring correct exchange of
colors between different device
(e.g. digital cameras, displays,
printers, scanners, etc).
3. User Define: The user can choose
his/her preference color setting
by adjusting red, green, blue
color.
Note
A measurement of the color of light
radiated by an object while it is being
heated. This measurement is expressed
in terms of absolute scale, (degrees
Kelvin). Lower Kevin temperatures such
as 2004K are red; higher temperatures
such as 9300K are blue. Neutral
temperature is white, at 6504K.
Q9: Can I connect my LCD display to
any PC, workstation or Mac?
Ans.: Yes. All Philips LCD displays are
fully compatible with standard
PCs, Macs and workstations.
You may need a cable adapter
to connect the display to your
Mac system. Please contact your
Philips sales representative for
more information.
Q10: Are Philips LCD displays Plug-
and- Play?
Ans.: Yes, the displays are Plug-and-
Play compatible with Windows
10/8.1/8/7
Q11: What is Image Sticking, or Image
Burn-in, or After Image, or Ghost
Image in LCD panels?
Ans.: Uninterrupted display of still or
static images over an extended
period may cause "burn in",
also known as "after-imaging"
or "ghost imaging", on your
screen. "Burn-in", "after-
imaging", or "ghost imaging" is
a well-known phenomenon in
LCD panel technology. In most
cases, the "Burn-in" or "after-
imaging" or "ghost imaging" will
disappear gradually over a period
of time after the power has been
switched off.
Always activate a moving screen
saver program when you leave
your display unattended.
Always activate a periodic screen
refresh application if your LCD
display will display unchanging
static content.
Warning
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or “after-
image” or “ghost image” symptoms
that will not disappear and cannot be
repaired. The damage mentioned above
is not covered under your warranty.
Q12: Why is my Display not showing
sharp text, and is displaying
jagged characters?
Ans.: Your LCD display works best at its
native resolution of 2560 x 1440
@ 60 Hz. For best display, please
use this resolution.
Q13: How to unlock/lock my hot key?
Ans.: Please press for 10
seconds to unlock/lock the hot
key, by doing so, your display
pops out “Attention” to show
the unlock/lock status as shown
below illustrators.
27
8. Troubleshooting & FAQs
Q14: Where can I find Important
Information manual mentioned in
EDFU?
Ans.: Important Information manual
can be download on the Philips
website support page.
2019 © TOP Victory Investment Ltd. All rights reserved.
This product has been manufactured by and is sold under
the responsibility of Top Victory Investments Ltd., and Top
Victory Investments Ltd. is the warrantor in relation to this
product. Philips and the Philips Shield Emblem are regis-
tered trademarks of Koninklijke Philips N.V. and are used
under license.
Specications are subject to change without notice.
Version: M6328P6AE1T