Contents
1 Notice
2 Important
3 Get started
4 Use your TV
5 Use more of your TV
6 Useful tips
- FAQ
- Troubleshooting
7 Information
- Glossary
- Maintenance
8 Specifications
9 Warranty

Philips 39PFL2608/F7 User Manual

Displayed below is the user manual for 39PFL2608/F7 by Philips which is a product in the TVs category. This manual has pages.

Related Manuals

Philips DVP3980/F7 Manual

Philips HTS3371D/F7 Manual

Philips HSB2351/F7 Manual

Philips 19PFL4505D/F7 Manual

Philips 22PFL3505D/F7 Manual

Philips 22PFL4505D/F7 Manual

Philips 32PFL3505D/F7 Manual

Philips 40PFL5505D/F7 Manual

www.philips.com/support

EN For further assistance, call the customer support service in your country.

• To obtain assistance, contact Philips Customer Care Center;

In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands 1 866 309 5962

México D.F. and Área Metropolitana; 58 87 97 36

Interior de la Republica; 01 800 839 19 89

ES Para obtener más información, llame al servicio de soporte al cliente de su país.

• Para obtener asistencia, comuníquese con Centro de atención al cliente de Philips;

En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes de los

Estados Unidos; 1 866 309 5962

México D.F. y Área Metropolitana; 58 87 97 36

Interior de la Republica; 01 800 839 19 89

FR Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service

à la clientèle de votre pays.

• Pour obtenir de l’aide, communiquez avec le centre de service à la clientèle Philips au;

Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges américaines; 1 866 309 5962

México D.F. et Área Metropolitana; 58 87 97 36

Interior de la Republica; 01 800 839 19 89



User Manual



Manual del Usuario



Manuel d’Utilisation

50PFL3908

46PFL3908

46PFL3608

40PFL4908

39PFL2908

39PFL2608

32PFL4908

29PFL4908

2English

Contents

1Notice 5

2Important 7

Positioning the TV 7

Regulatory notices 7

Environmental care 7

3Get started 8

Features 8

Supplied accessories 8

Symbols used in this User Manual 8

Stand assembly 9

Attaching the base 9

Managing cables 10

Installing the remote control batteries 10

Remote control 11

Control panel 12

Terminals 12

Connecting the antenna or the cable 13

Plugging in the AC power cord 13

Selecting your connection quality 14

Connecting your devices 14

Initial setup 18

4Use your TV 20

Switching on your TV and putting it in Standby mode 20

Adjusting volume 20

Switching channels 20

Watching channels from an external device 21

Access the Home menu 21

Using auto mode 22

Create and use lists of favorite channels 22

Changing picture format 23

TV screen information 23

USB 24

5 Use more of your TV 26

Settings assistant 27

Picture 27

Sound 29

Features 30

Caption settings 30

Sleeptimer 31

Child and ratings lock 31

Change PIN 33

Installation 33

Language 33

Channel installation 34

Preferences 35

Use Philips EasyLink 35

Network 37

Return your settings to default values 40

Software 40

Checking your current software version 40

Preparing for the software upgrade 40

Upgrading the software 41

Automatically check for latest software 41

Netflix deactivation 41

Netflix ESN 42

VUDU deactivation 42

YouTube deactivation 42

Hulu Plus deactivation 42

License 42

Philips Wirelessconnect 43

View photos, play music and watch videos using DLNA 43

Net TV 45

Enjoying vTuner 46

Pandora® operations 48

6 Useful tips 49

FAQ 49

Troubleshooting 50

7 Information 52

Glossary 52

Maintenance 52

8 Specifications 53

9 Warranty 54

License end of book

Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.

to get the very most from your purchase.

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY

CARES

• Manufacturers, retailers and the rest of the consumer

electronics industry are committed to making home

entertainment safe and enjoyable.

• As you enjoy your television, please note that all televisions –

new and old- must be supported on proper stands or installed

according to the manufacturer’s recommendations. Televisions

that are inappropriately situated on dressers, bookcases,

shelves, desks, speakers, chests, carts, etc., may fall over,

resulting in injury.

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the

safe installation of your television.

• ALWAYS read and follow all instructions for proper use of

your television.

• NEVER allow children to climb on or play on the television or

the furniture on which the television is placed.

• NEVER place the television on furniture that can easily be used

as steps, such as a chest of drawers.

• ALWAYS install the television where it cannot be pushed,

pulled over or knocked down.

• ALWAYS route cords and cables connected to the television

so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if

you have any doubts about your ability to safely mount your

television.

• ALWAYS use a mount that has been recommended by the

television manufacturer and has a safety certification by an

independent laboratory (such as UL, CSA, ETL).

• ALWAYS follow all instructions supplied by the television and

mount manufacturers.

• ALWAYS make sure that the wall or ceiling where you are

mounting the television is appropriate. Some mounts are not

designed to be mounted to walls and ceilings with steel studs

or cinder block construction. If you are unsure, contact a

professional installer.

• Televisions can be heavy. A minimum of two people is

required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW

PLACE IN YOUR HOME

• Many new television buyers move their older CRT televisions

into a secondary room after the purchase of a flat-panel

television. Special care should be made in the placement of

older CRT televisions.

• ALWAYS place your older CRT television on furniture that is

sturdy and appropriate for its size and weight.

• NEVER place your older CRT television on a dresser where

children may be tempted to use the drawers to climb.

• ALWAYS make sure your older CRT television does not hang

over the edge of your furniture.

CE.org/safety

Visit our World Wide Web Site at www.philips.com/support

3English

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your

safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus.

11. Only use attachments / accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart / apparatus combination to avoid injury

from tip-over.

• The recommended Wall Mount Bracket Kit (sold separately)

allows the mounting of the TV on the wall.

• For detailed information on installing the wall mount, refer to the

Wall Mount Instruction Book.

• P&F USA is not responsible for any damage to the product or

injury to yourself or others if you elect to install the TV Wall

Mount Bracket or mount the TV onto the Bracket on your own.

• The Wall Mount Bracket must be installed by experts.

P&F USA is not liable for these types of accidents or injury noted

below.

• Install the Wall Mount Bracket on a sturdy vertical wall.

• If installed onto a ceiling or slanted wall, the TV and Wall Mount

Bracket may fall which could result in a severe injury.

• Do not use screws that are longer or shorter than their specified

length. If screws too long are used this may cause mechanical or

electrical damage inside the TV set. If screws too short are used

this may cause the TV set to fall.

• Do not fasten the screws by excessive force. This may damage

the product or cause the product to fall, leading to an injury.

• For safety reasons use 2 people to mount the TV onto a Wall

Mounting Bracket.

• Do not mount the TV onto the Wall Mounting Bracket while

your TV is plugged in or Turned On. It may result in an electrical

shock injury.

When installing the unit on the wall, allow this much space.

Top: 11.8 inches (30cm)

Left and right side: 5.9 inches (15cm)

Bottom: 3.9 inches (10cm)

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Article 820-40 of the NEC that provides guidelines for

proper grounding and, in particular, speciﬁes that the cable ground

shall be connected to the grounding system of the building, as close

to the point of cable entry as practical.

Example of Antenna Grounding as per NEC − National

Electric Code

GROUND CLAMP ANTENNA LEAD IN WIRE

GROUND CLAMPS

ANTENNA DISCHARGE

UNIT (NEC SECTION 810-20)

ELECTRIC SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

Wall Mount Bracket Kit

PHILIPS

SANUS

Screw dimension

50PFL3908 /

46PFL3908 /

46PFL3608

40PFL4908 /

39PFL2908 /

39PFL2608

SQM6485

M6 x 1.614” (41mm)

with spacer

PHILIPS

SQM6435/17

M6 x 1.614” (41mm)

with spacer

SAN18B M4 x 0.472” (12mm)

32PFL4908 /

29PFL4908

Model #Brand

4English

Important Safety Instructions

Trademarks are the property of Koninklijke Philips N.V. or their

respective owners.

P&F USA reserves the right to change products at any time without

being obliged to adjust earlier supplies accordingly.

The material in this User Manual is believed adequate for the intended

use of the system. If the product or its individual modules or procedures

are used for purposes other than those specified herein, confirmation of

their validity and suitability must be obtained. P&F USA warrants that

the material itself does not infringe any United States patents. No

further warranty is expressed or implied.

P&F USA cannot be held responsible neither for any errors in the

content of this document nor for any problems as a result of the

content in this document. Errors reported to P&F USA will be adapted

and published on the P&F USA support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels. Although it has

effective pixels of 99.999% or more, black dots or bright points of light

(red, green or blue) may appear constantly on the screen. This is a

structural property of the display (within common industry standards)

and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers

to the inside of the product. Repairs may only be done by Service

Centers and official repair shops. Failure to do so shall void any

warranty, stated or implied.

Any operation expressly prohibited in this User Manual, any adjustments

or assembly procedures not recommended or authorized in this User

Manual shall void the warranty.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits

for a Class B Digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by Turning the equipment Off and

On, the user is encouraged to try to correct the interference by one

or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician

for help.

Declaration of Conformity

Trade Name : PHILIPS

Responsible Party : P&F USA, Inc.

Model :

50PFL3908, 46PFL3908, 46PFL3608, 40PFL4908,

39PFL2908, 39PFL2608, 32PFL4908, 29PFL4908

Address : PO Box 2248, Alpharetta, GA 30023-2248

U.S.A.

Telephone Number : 1 866 309 5962

Modifications

This apparatus may generate or use radio frequency energy. Changes

or modifications to this apparatus may cause harmful interference

unless the modifications are expressly approved in the User Manual.

The user could lose the authority to operate this apparatus if an

unauthorized change or modification is made.

Cables

Connections to this device must be made with shielded cables with

metallic RFI / EMI connector hoods to maintain compliance with FCC

Rules and Regulations.

Canadian notice

CAN ICES-3 (B)/NMB-3 (B)

Standard Television Receiving Apparatus, Canada BETS-7 / NTMR-7.

The following FCC/IC RSS-Gen is description of Wireless

LAN adapter.

FCC Caution: Any changes or modifications not expressly approved

by the party responsible for compliance could void the user’s

authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

Country Code Statement

For product available in the USA market, only channel 1~11 can be

operated. Selection of other channels is not possible.

To maintain compliance with FCC RF exposure requirements, use

only belt-clips, holsters or similar accessories that do not contain

metallic components in its assembly. The use of accessories that do

not satisfy these requirements may not comply with FCC RF exposure

requirements and should be avoided.

FCC Radiation Exposure Statement

This equipment is compliance with SAR for general population/

uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been

tested in accordance with the measurement methods and procedures

specified in OET Bulletin 65 Supplement C. This equipment should be

installed and operated with minimum distance 2.5cm between the

radiator & your body.

This device complies with Industry Canada license-exempt RSS

standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference and (2) this device must accept

any interference, including interference that may cause undesired

operation of the device.

5English

1Notice

All other registered and unregistered trademarks are the property of

their respective owners.

ENERGY STAR

is a joint program of

the U.S. Environmental Protection

Agency and the U.S. Department of

Energy helping us all save money and

protect the environment through

energy efficient products and practices.

Consumer Notice:

This TV has been set to maximize energy efficiency while delivering the

best possible picture using the factory installed home mode settings.

Changing or enabling other features in this TV (e.g. brightened

backlighting) will possibly increase energy consumption beyond the

original ENERGY STAR

qualified limits.

(www.freetype.org).

The American Academy of Pediatrics discourages television viewing

for children younger than two years of age.

LED backlighting technology uses less

energy when compared with a

standard CCFL backlighting LCD

television of the same screen size.

Actual energy savings will vary

depending on the screen size.

The Wi-Fi CERTIFIED Logo is a

certification mark of the Wi-Fi Alliance.

Manufactured under license from

Dolby Laboratories. Dolby and the

double-D symbol are trademarks of

Dolby Laboratories.

The terms HDMI and HDMI

High-Definition Multimedia Interface,

and the HDMI Logo are trademarks or

registered trademarks of HDMI

Licensing LLC in the United States and

other countries.

is a trademark of SRS Labs, Inc.

TruSurround HD technology is

incorporated under license from SRS

Labs, Inc.

SRS TruSurround HD™ creates an

immersive, feature-rich surround

sound experience from two speakers,

complete with rich bass, high

frequency detail and clear dialog.

VUDUTM is a trademark of VUDU, Inc.

Netflix and the Netflix logo are

trademarks or registered trademarks

of Netflix, Inc.

YouTube and the YouTube logo are

trademarks of Google Inc.

Film Fresh and the Film Fresh logo are

registered trademarks of Film Fresh Inc.

CloudTV™ (CloudTV™ by

ActiveVideo®) technology provided

under license from ActiveVideo

Networks, Inc. U.S. and Foreign Patents

apply. CloudTV™ and the “CloudTV™”

logo are proprietary trademarks of

ActiveVideo Networks, Inc.

PANDORA, the PANDORA logo, and

the Pandora trade dress are

trademarks or registered trademarks of

Pandora Media, Inc. Used with

permission.

vTuner is a trademark of Nothing Else

Matters Software, Ltd.

* vTuner is supported in 50PFL3908, 46PFL3908, 40PFL4908, 39PFL2908,

32PFL4908, 29PFL4908 only.

* Film Fresh is supported in 50PFL3908, 46PFL3908, 40PFL4908, 39PFL2908,

32PFL4908, 29PFL4908 only.

Hulu, the Hulu logo, www.hulu.com,

and other Hulu marks, graphics, logos,

scripts, and sounds are trademarks of

Hulu. None of the Hulu trademarks

may be copied, downloaded, or

otherwise exploited.

Portico, Portico TV and the Portico

logo are service marks of Net2TV

Corporation.

DLNA

, the DLNA Logo and DLNA

CERTIFIED

are trademarks, service

marks, or certification marks of the

Digital Living Network Alliance.

CinemaNow and the CinemaNow

logo are trademarks of BestBuy Stores

L.P. and BestBuy Canada LTD.

* CinemaNow is supported in 50PFL3908, 46PFL3908, 40PFL4908,

39PFL2908, 32PFL4908, 29PFL4908 only.

6English

• Large screen TVs are heavy. 2 people are required to carry and

handle a large screen TV.

• Make sure to hold the upper and bottom

frames of the unit firmly as illustrated.

• Install the unit in a horizontal and stable

position.

• Do not install the unit in direct sunlight

or in a place subject to dust or strong

vibration.

• Depending on the environment, the temperature of this unit may

increase slightly. This is not a malfunction.

• Avoid a place with drastic temperature changes.

• Do not place anything directly on top or bottom of the unit.

• Depending on your external devices, noise or disturbance of the

picture and / or sound may be generated if the unit is placed too

close to them. In this case, please ensure enough space between

the external devices and the unit.

• Do not insert the AC power cord into the power socket outlet

before all the connections are made.

• Ensure that you always have easy access to the AC power cord or

plug to disconnect the TV from the power.

• Before you move the TV, disconnect attached cables to prevent

damage to connectors.

• Be sure to unplug the AC power cord from the AC outlet before

moving or carrying the unit.

Do not place the unit on the furniture that is capable of being tilted

by a child and an adult leaning, pulling, standing or climbing on it.

A falling unit can cause serious injury or even death.

This apparatus should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 4 inches (10cm) or more around this

apparatus.

Press to turn the unit on and go into standby mode.

To completely turn Off the unit, you must unplug the AC power cord.

Disconnect the AC plug to shut the unit off when trouble is found or

not in use. The AC plug shall remain readily available.

Never use a gas duster on this TV.

The gas trapped inside of this unit may cause ignition and explosion.

CAUTION: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall not be

exposed to excessive heat such as sunshine, fire or the

like.

WARNING: To prevent injury, this apparatus must be securely

attached to the furniture / wall in accordance with the

instructions. Tipping, shaking, or rocking the unit may

cause injury / death.

The packaging of this product is intended to be recycled.

Contact your local authorities for information about how to recycle the

packaging.

For product recycling information, please visit - www.recycle.philips.com

Philips pays a lot of attention to produce environment-friendly products

in green focal areas. Your new TV contains materials which can be

recycled and reused. At the end of its life, specialized companies can

dismantle the discarded TV to concentrate the reusable materials and to

minimize the amount of materials to be disposed of. Please ensure you

dispose of your old TV according to local regulations.

Disposal of used batteries

The batteries supplied do not contain the heavy metals mercury and

cadmium. Nevertheless, in many areas batteries may not be disposed

of with your household waste. Please ensure you dispose of batteries

according to local regulations.

End of life directives

AC plug

7English

2Important

Positioning the TV

Regulatory notices

Environmental care

8English

3Get started

Features

• DTV / TV / CATV

You can use your remote control to select channels which are broadcast in

Digital format and conventional Analog format. Also, cable subscribers can

access their cable TV channels.

• Information display

You can display the title, contents and other information of the current

program on the TV screen.

•AutoProgram

This unit automatically scans and memorizes channels available in your area,

eliminating difficult setup procedures.

•Net TV

This unit lets you enjoy Internet services. Use the remote control to browse

the Net TV pages. You can play movies and much more, all from your TV

screen.

• Child lock

This feature allows you to block children’s access to inappropriate programs.

• Closed Caption decoder

Built-in Closed Caption decoder displays text for Closed Caption supported

programs.

• MTS / SAP tuner

Audio can be selected from the remote control.

• Auto Standby

If there is no Input signal and no operation for 15 minutes, the unit

will go into Standby mode automatically.

•Sleep timer

You can set the unit to go into Standby mode after a specific

amount of time.

• Choices for on-screen language

Select your on-screen language: English, Spanish or French.

• Stereo sound function

• PLL frequency synthesized tuning

Provides free and easy channel selection and lets you tune directly to any

channel using the number and decimal point “•” buttons on the remote

control.

• Various adjustment for picture and sound

Customizes image quality suitable for your room and sets your sound

preference.

• EasyLink via HDMI link

EasyLink allows your other HDMI link devices to be controlled by the HDMI

cable connected to your TV.

• HDMI Input

• HDMI-DVI Input

If your video device has DVI Output jack, use an HDMI-DVI conversion

cable to connect the unit.

• Component Video Input

• PC Input

•AV Input

•USB terminal

The picture (JPEG), music (MP3) and video files stored on a USB Memory

Stick can be played back on this unit.

• Digital Audio Output

• Headphone Audio Output

Supplied accessories

Symbols used in this User Manual

The following is the description for the symbols used in this User

Manual. Description refers to:

• If neither symbol appears, the operation is applicable to both.

User Manual Quick Start guide

Remote Control and

batteries

(AAA, 1.5V x 2)

TV base and screws

Screws packed with this unit.

Note

• If you lose the screws, please purchase the above-mentioned Phillips head screws at

your local store.

• If you need to replace these accessories, please refer to the part name or No. with the

illustrations and call our toll free customer support line found on the cover of this User

Manual.

When using a universal remote control to operate this unit.

• Make sure the component code on your universal remote control is set to our brand.

Refer to the instruction book accompanying your remote control for more details.

• We do not guarantee 100% interoperability with all universal remote controls.

AAA

32PFL4908 / 29PFL4908

50PFL3908 / 46PFL3908 / 46PFL3608 /

40PFL4908 / 39PFL2908 / 39PFL2608

Model Quantity Size

50PFL3908 /

46PFL3908 /

46PFL3608

8 M4 x 0.472”(12mm)

40PFL4908 /

39PFL2908 /

39PFL2608

3 M4 x 0.393”(10mm)

4 M4 x 0.787”(20mm)

32PFL4908 /

29PFL4908 3 M4 x 0.984”(25mm)

Digital TV operation

Analog/Cable TV operation

9English

Stand assembly

Attaching the base

You must attach the base to the unit to have it as a table top unit.

Be sure the front and rear of the base match the proper direction.

For large screen TVs, at least 2 people are required for these steps.

50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 / 39PFL2908 / 39PFL2608

× 4 [50PFL3908 / 46PFL3908 / 46PFL3608]

× 3 [40PFL4908 / 39PFL2908 / 39PFL2608:

M4 x 0.393”(10mm)]

32PFL4908 / 29PFL4908

× 2

50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 / 39PFL2908 / 39PFL2608

× 4 [50PFL3908 / 46PFL3908 / 46PFL3608]

× 4 [40PFL4908 / 39PFL2908 / 39PFL2608:

M4 x 0.787”(20mm)]

Note

• Make sure to use a table which can support the weight of this unit and is larger than

this unit.

• Make sure the table is in a stable location.

• When attaching the base, ensure that “FRONT” with “arrow” written on the bottom

of the base is downward.

• When attaching the base, ensure that all screws are tightly fastened. If the base is not

properly attached, it could cause the unit to fall, resulting in injuries as well as damage

to the unit.

• To remove the base from this unit, unscrew the Phillips head screws in step 2.

Be careful not to drop the base when you remove it.

32PFL4908 / 29PFL4908

× 1

10 English

Managing cables

Route your antenna cable and all other cables through the cable

management tie* at the back of the TV.

The holder helps keep your cables tidy and easily manageable.

1Attach the cable management tie as illustrated below.

2Pass cables through the cable management tie to avoid tangles.

* The cable management tie is not supplied with your TV. If you would

like this part, please call our toll free customer support line found on

the cover of this User Manual, and it will be sent to you for free of

charge.

Installing the remote control batteries

1Slide the battery cover off the back of the remote control.

2Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −

ends of the batteries line up with the markings inside the case.

3Slide the cover back into position.

Note

• Remove the batteries if not using the remote control for an extended period of time.

11 English

Remote control a (POWER)

Turns the TV On from Standby or Off to Standby.

bVUDU

Access to VUDU directly.

cEasyLink(HDMI CEC) buttons

E / DSearches Backward or Forward through the disc.

►FStarts, pauses or resumes playback.

CStops the Disc playback.

d FORMAT

Adjusts the Picture size on the TV screen.

e (MENU)

Displays the main menu.

f INFO

Displays Information about the current program.

gOK

Press to decide the command of setting when the Home menu is

displayed.

h▲▼◄► (NAVIGATION buttons)

Moves the cursor, Selects the On-screen Menu items.

i OPTIONS

Displays a list of menu items applicable to the highlighted object

or screen.

j SOURCE

Selects Connected devices.

kCH + / −

Selects a Channel.

lApps (APP1 / APP2 / APP3 / APP4) buttons

Works as direct access to user specified net apps.

m0 − 9 (NUMBER buttons)

Used to enter a Channel / Program number.

• (DOT) Use with 0-9 to select digital channels. For example, to

enter 2.1, press

PREV.CH Returns to the previously viewed Channel.

n (MUTE)

Turns the Sound On and Off.

oVOL + / −

Adjusts the Volume.

pBACK

Returns to the previous Menu operation.

qNET TV

Access to Net TV menu directly.

rCC

Displays the audio portion of programming as text superimposed

over the video.

sNETFLIX

Access to Netflix directly.

12 English

Control panel

aVOL ◄/►

Adjusts the Volume. In the Menu screen, moves the Cursor Left

(◄) / Right (►).

VOL ◄ : Volume Down

VOL ► : Volume Up

bCH ▲/▼

Selects a Channel. In the Menu screen, moves the Cursor Up (▲)

/Down (▼).

cMENU

Opens the Main On-screen Menu.

dSOURCE

Selects Connected devices.

e (POWER)

Turns the TV On and Off.

fRemote Control Sensor

Receives IR signal from Remote control.

gPower On / Standby Indicator

(On : lights in white, Standby : no light)

hAmbient Light Sensor

Alters the brightness of the TV screen automatically by detecting

your room lighting level. Do not block this Light Sensor window

to allow proper operation.

Te r m i n a l s

iEthernet port

For Internet connection using an Ethernet cable with an RJ-45

connector.

jDigital Audio Output jack

Digital Audio (S/PDIF) Output to home theaters and other Digital

Audio systems.

kPC Input jack

VGA cable connection for PC.

lComponent (Y/Pb/Pr) / Composite Video (VIDEO) Input jacks

for VIDEO

Composite Video Input (VIDEO) jack is a shared jack with

Component Video Input (Y) jack.

mAnalog Audio (L/R) Input jacks

Connect Analog Audio signals from;

– HDMI-DVI / Analog Audio (L/R) jacks signal

– Component Video / Analog Audio (L/R) jacks signal

– Composite Video / Analog Audio (L/R) jacks signal

– PC Connection / Analog Audio (L/R) jacks signal with Stereo

mini 3.5mm plug Audio cable on PC

nHDMI Input jack(s)

Digital audio and video Input from high definition Digital devices

such as DVD / Blu-ray disc players, cable / satellite set-top boxes,

PC’s.

For HDMI 1 only

In addition to normal HDMI and HDMI-DVI functionality, it

outputs TV Audio to an HDMI-ARC-compliant device, such as a

home theater system.

oUSB terminal

Data Input from USB Memory Stick only.

Do not connect any device to this terminal such as; Digital

camera, keyboard, mouse, etc.

p75 ohm Cable / Antenna connection

Signal Input from an antenna or cable / satellite set-top boxes.

qHeadphone Audio Output jack

Headphone 3.5mm stereo jack for personal listening.

50PFL3908 / 46PFL3908 / 46PFL3608

edcba

fgh

*Keys on Rear.

Control Keys are located

on the Rear side of the TV

* When seen from the front.

40PFL4908 / 32PFL4908 / 29PFL4908

edc ba

* 40PFL4908 only

39PFL2908 / 39PFL2608

edcba

13 English

Connecting the antenna or the cable

Be sure your antenna or other device is connected properly before

plugging in the AC power cord.

If you connect to an antenna through RF cable

Any DTV programs that are broadcasted in your area can be received

for free through an antenna connection.

If you connect a set-top box through RF cable

If the TV is connected to a cable / satellite set-top box via a coaxial

connection, set the TV to channel 3, 4 or the channel specified by the

service provider.

If you connect a set-top box through HDMI

If the TV is connected to a cable / satellite set-top box via HDMI, make

sure you select the correct Source by using SOURCE.

If you connect a set-top box through Component Video Input

If the TV is connected to a cable / satellite set-top box via Component

Video Input, make sure you select the correct Component Video Source

by using SOURCE.

Connecting a set-top box, Blu-ray disc / DVD recorder

via composite connectors and Analog Audio

Do not place your recorder too close to the screen because some

recorders can be susceptible to signals.

Plugging in the AC power cord

Make sure that the AC power cord must be plugged to an AC outlet

after all the necessary connections are made.

INININ

OUT

cable

RF cable

antenna

INININ

OUT

antenna

RF cable set-top box

RF cable

INININ OUT

RF cable

set-top box

HDMI cable

OUTOUTOUT

ININ

OUT

OUTOUT

Component (Y/Pb/Pr) video cables

Audio (L/R) cables

set-top box

RF cable

Note

• If you have any question about the DTV’s antenna, visit www.antennaweb.org for

further information.

• Depending on your antenna system, you may need different types of combiners

(mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on

these devices is 2,000MHz or 2GHz.

• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable

from the antenna Input jack before moving the unit.

• If you did use an antenna to receive Analog TV, it should also work for DTV reception.

Outdoor or attic antennas will be more effective than a set-top box or inside antenna.

• To Turn On your reception source easily between antenna and cable, install an

antenna selector.

• If you are not receiving a signal from your cable service, contact the Cable provider.

• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to

stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.

Caution

• Do not connect the AC power cord to a power supply outside the indicated voltage

of this unit (AC 120V).

• Connecting the AC power cord to a power supply outside of this range may result in

fire, smoke, unit failure or electrical shock.

Note

• Each time you plug in the AC power cord, no operations will be performed for a few

seconds. This is not a malfunction.

INININ

OUT

OUTOUT

OUT

OUTOUT

ININ

OUT

set-top box

Blu-ray disc/DVD recorder

RF cable

Audio (L/R) + Video cables

Audio (L/R) +

Video cables

RF cable

cable

14 English

Before you connect AC power cord:

Be sure other devices are connected properly before plugging in the AC

power cord.

Selecting your connection quality

HDMI - Highest quality

Supports high-definition Digital signals and gives highest picture and

sound quality. Video and audio signals are combined in one cable.

You must use HDMI for full high-definition video and to enable Philips

EasyLink (HDMI CEC).

Component (Y Pb Pr) - High quality

Supports high-definition Analog signals but gives lower picture quality

than HDMI. Component (Y/Pb/Pr) Video cables combine red / green /

blue video cables with red / white audio (L/R) cables. Match the cable

colors when you connect to the TV.

Composite - Basic quality

For analog connections. Composite Video / Audio Analog cable usually

combine a yellow video cable with red / white audio (L/R) cables. With

this unit, yellow cable must be connected to Y (green) jack of

Component Video Input jacks.

Connecting your devices

HDMI Digital connection

HDMI connection offers the highest picture quality.

HDMI (High-Definition Multimedia Interface) transports high definition

Digital video and multi-channel Digital Audio through a single cable.

HDMI-DVI connection

This unit can be connected to your device that has a DVI terminal.

Use an HDMI-DVI conversion cable for this connection and it requires

audio cable for Analog Audio signal as well.

Continued on next page.

No supplied cables are used with these connections:

• Please purchase the necessary cables at your local store.

Note

• Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is

a form of Digital Rights Management that protects high definition content in Blu-ray

discs or DVDs.

• The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows

output of TV Audio to an HDMI-ARC-compliant device.

Note

• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI

cable is recommended for the better compatibility.

For HDMI connection

• The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals,

32kHz / 44.1kHz and 48kHz of audio signals.

• This unit accepts 2 channel Audio signal (LPCM) only.

• This unit accepts only signals in compliance with EIA861.

For HDMI-DVI connection

• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.

• HDMI-DVI connection requires separate audio connections as well and the audio

signals are output as Analog (L/R) Audio.

• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

INININ OUT

set-top box

Blu-ray disc player

HD game console

HDMI cable

INININ OUT

ININ

OUT

HDMI-DVI

conversion cable

Audio (L/R) cables

cable receiver or

satellite box with the

DVI Output jack

15 English

HDMI-ARC connection

HDMI-ARC allows you to use EasyLink to output TV Audio directly to a

connected Audio device, without the need for an additional Digital

Audio cable.

Component Analog Video Connection

Component Analog Video connection offers better picture quality for

video devices connected to the unit.

If you connect to the unit’s Component Video (Y/Pb/Pr) Input jacks,

connect Analog Audio cables to the Analog Audio (L/R) Input jacks.

Composite Analog Video Connection

Composite Analog Video connection offers standard picture quality for

video devices connected to the unit.

If you connect to the unit’s Composite Video (Y/VIDEO) Input jack,

connect audio cables to the Audio (L/R) Input jacks. When the Audio is

monaural, then only connect to the Audio L Input jack.

Connecting the TV to the Internet using an Ethernet

cable

Continued on next page.

Note

• The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to

output Digital Audio to an HDMI home theater system.

• Be sure that the device is HDMI CEC and ARC compliant and that the TV is

connected to the device using an HDMI cable attached to HDMI-ARC connectors.

Note

• The unit accepts 480i / 480p / 720p and 1080i of video signals for this connection.

HDMI ARC

OUT

HDMI cable

Digital home theater

amplifier

HDMI 1 IN only

OUTOUTOUT

ININ

OUT

OUTOUT

Audio (L/R) cables set-top box

Blu-ray disc/DVD

recorder

Component (Y/Pb/Pr) Video cables

Note

• With this unit, yellow cable must be connected to Y (green) jack of Component Video

Input jacks.

• Whenever you connect to the Composite Video Input jack (Y/VIDEO), you must

disconnect the Component Video Input jacks (Pb and Pr). If you leave those jacks

connected, it may cause of an unstable picture.

• Only the left loudspeaker reproduces sound for mono equipment. Use a mono to

stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.

Note

• Please purchase shielded Ethernet cables at your local store and use them when you

connect to network equipment.

• After connecting an Ethernet cable, set up necessary network settings. Network ➟

p.37

• Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid

damaging the unit.

• If your telecommunications equipment (modem, etc.) does not have broadband

router functions, connect a broadband router.

• If your telecommunications equipment (modem, etc.) has broadband router functions

but there is no vacant port, use a hub.

• For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.

• Do not connect your PC directly to the Ethernet port of this unit.

OUTOUTOUT

ININ

DVD player

Audio (L/R) + Video cable

LAN

Network provisioning

equipment

Ethernet cable

Internet

16 English

Connecting the TV to the Internet using a wireless LAN

Digital Audio Output Connection

If you connect this unit to an external Digital Audio device, you can

enjoy multi-channel audio like 5.1ch Digital broadcasting sound.

Use a Digital Audio coaxial cable to connect the unit to external Digital

Audio devices.

PC connection

HDMI connection

This unit can be connected to your PC that has a HDMI terminal. Use an

HDMI cable for this Digital connection.

HDMI-DVI connection

This unit can be connected to your PC that has a DVI terminal. Use an

HDMI-DVI conversion cable for this Video Digital connection and it

requires Stereo mini 3.5mm plug Audio cable for Analog Audio signal as

well.

VGA connection

This unit is equipped with a PC Input jack. If you connect this unit to

your PC, you can use this unit as a PC monitor.

Use a VGA cable for this Video connection and it requires a Stereo mini

3.5mm plug Audio cable for Analog Audio signal as well.

Continued on next page.

Note

• After you made the wireless connection, set up necessary network settings. Network

➟ p.37

• Use a Wireless LAN Access Point (AP) (e.g. wireless router) which supports IEEE

802.11 b/g/n. (n is recommended for stable operation of the wireless network.)

• This unit does not support Ad-hoc mode.

• Other radio devices or obstacles may cause interference to the wireless network

connection.

WLAN

LAN

Broadband router

Ethernet cable

Network provisioning

equipment

Internet

INININ

OUT

OUTOUT

Digital home theater

amplifier

Digital Audio coaxial cable

INININ OUT

HDMI cable

OUT

ININ OUT

INININ

HDMI-DVI

conversion cable PC

Stereo mini 3.5 mm plug Audio cable

OUT

Stereo mini 3.5 mm plug Audio cable

VGA cable

17 English

The following video signals can be displayed:

Other formats or non-standard signals will not be displayed correctly.

* 50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 / 39PFL2908 /

39PFL2608 only.

USB Memory Stick

This unit offers easy playback of picture (JPEG), music (MP3) and video

files.

Insert the USB Memory Stick into the USB terminal shown below.

USB ➟ p.24

Format Resolution Refresh rate

VGA 640 x 480

60Hz

SVGA 800 x 600

XGA 1,024 x 768

WXGA 1,280 x 768

1,360 x 768

FHD* 1,920 x 1,080

Note

• Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core.

• The following operations may reduce noise.

– Attach a ferrite core to the AC power cord of your PC.

– Unplug the AC power cord and use the built-in battery of your PC.

• Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI

cable is recommended for the better compatibility.

• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.

• HDMI-DVI connection requires separate audio connections as well and the audio

signals are output as Analog (L/R) Audio.

• DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

Note

• The unit recognizes only a USB Memory Stick.

• Do not use a USB hub or an extension cable to connect an external hard disk drive to

the unit. (Not supported.)

• A USB Memory Stick is always inserted to this unit directly.

• A USB Memory Stick is not supplied with this unit.

• We do not guarantee that all USB Memory Sticks can be supported by this unit.

• Be sure to keep a backup copy of the original files on your device before you play

them back on this unit. We have no responsibilities for damage or loss of your stored

data.

• To protect your USB Memory Stick files from being erased place the write protect

sliding tab in the protect position.

• When you are ready to remove a USB Memory Stick, set the unit to go into Standby

mode to avoid any damage to your data and the unit.

• A USB Memory Stick that requires its own driver or the device with a special system

such as fingerprint recognition are not supported.

• This unit is not allowed to use the USB Memory Stick which requires an external

power supply (500mA or more).

18 English

Initial setup

This section will guide you through the unit’s initial setting which includes

selecting a language for your on-screen menu, country, location and

AutoProgram, which automatically scans and memorizes viewable

channels. You can also set the network connection in this setting.

Before you begin:

Make sure the unit is connected to antenna or cable.

1After making all the necessary connections, press to Turn On the

unit.

• It may take a few moments to Turn On the unit for the first time.

•Initial setup menu appears automatically after the unit is Turned

On.

2Use ▲▼ to select the on-screen language, country, TV placement,

location on the right side of the TV screen, then press OK.

• You must set Home in location setting. Otherwise, Picture and

Sound settings you adjusted will not be memorized after the unit

goes into Standby mode.

3Use ▲▼ to select the signal type.

• If the TV is connected to a cable box or satellite set-top box,

select the 2nd one and skip to step 5.

4Use ▲▼ to select Antenna for TV channels or Cable for CATV

channels, then press OK.

– When Antenna is selected, the TV detects antenna signals. It

searches for DTV and Analog TV channels available in your area.

– When Cable is selected, the TV detects signals supplied by cable. It

searches for DTV, Analog TV and Cable channels available in your

area.

•Autoprogram will begin.

5After the channel installation is completed, Network setup screen

will appear. Use ▲▼ to select Wireless or Wired, then press OK.

• If you have a router with WPS function, select Wireless and use

▲▼ to select Easy Connect, then press OK.

6Follow the on-screen instructions to complete the installation.

• When you select On in the selection screen of Auto software

update. A message will appear if there is the latest software on

the network server.

7Use ◄► to select Start, then press OK to begin Settings assistant.

8Press ◄ or ► 5 times to select the side of the pictures that is the

most pleasing to you, then press OK.

Continued on next page.

These operations are accessible by remote control.

Some may also be accessible by control panel on the main unit.

To set up a TV signal from a cable TV

wall jack or a standard TV antenna.

Select

To set up a TV signal from a cable TV

box or satellite TV receiver.

Select

Antenna

Cable

Skip

Make sure that you have

attached your antenna or cable

signal into the jack on the back

of your TV labeled "ANTENNA IN".

Now select either Antenna or

Cable, using up/down key of the

remote control. Once youhave

made your selection, press the

OK button to proceed.

Wireless If you have a Wireless router, select Wireless to connect

to the Internet.

Wired If you connect with an Ethernet cable, select Wired to

connect to the Internet.

System searching. Please wait...

Digital channels found: 0

Analog channels found: 0

Auto programming may take more than 20 minutes to

complete. Digital channels will take longer than Analog

to find and program. Please wait until you see

the Auto Programming complete message.

Stop

This TV can be connected to

your home network.

Select your connection type.

Wireless

Wired

Skip

Cancel Start

Settings assistant will allow you to customize your picture settings to your personal

preference. You will see a series of test pictures where the right side and left side

differ. Select the side that is most pleasing to you with the Left/ Right buttons.

The energy consumption in the “Standard” setting is Energy Star certified.

Which side of the picture do you prefer?

Cancel Picture A Picture B

19 English

9Use ◄► to select your preferred energy efficiency level, then press

OK.

10 Use ◄► to select your preferred sound setting, then press OK.

11 Press OK to finish Settings assistant.

•Network updates will appear after Connection test succeeds.

Use ◄► to select Ye s , then press OK.

• When the initial setup is completed, the lowest memorized

channel with the confirmation message will be displayed on the

TV screen.

After an initial setup is completed...

• If you want to scan the channels automatically again.

Autoprogram ➟ p.34

• You can add the desired cable and Analog channels

unmemorized by AutoProgram.

Weak channel installation ➟ p.34

• If you want to change to another language.

Language ➟ p.33

• If you want to change the country setting.

Country ➟ p.45

• If you want to change the location setting.

Location ➟ p.35

• If you want to change the network setting.

Network ➟ p.37

• If you want to restore the picture and sound setting.

Settings assistant ➟ p.27

Note

• If you are not receiving a signal from your cable service, contact the Cable provider.

• If you press during autoprogram, this setup of TV channels will be cancelled.

• The initial AutoProgram function can be executed for either Antenna or Cable only

once. When you change the connection (Antenna / Cable), select Autoprogram

again. ➟ p.34

Select the energy efficiency level you prefer.

Personal Energy saving

Select your preferred sound setting

Sound A Sound B Sound C

Store your preferences.

Cancel Store

20 English

4Use your TV

Switching on your TV and putting it in

Standby mode

To Turn the TV On from Standby or Off to Standby

• Press (3 raised dots on the Rear panel or Front panel or the

Remote control).

Adjusting volume

To decrease or increase volume

• Press VOL ◄ / ► (1 raised dot on the Rear panel) or Front panel

or press VOL + / − on the Remote control.

VOL ◄ : Volume Down

VOL ► : Volume Up

To mute or unmute sound

• Press on the remote control to mute the sound.

• Press again or VOL + / − to recover the original sound.

Switching channels

To select Channels by using CH ▼/▲ or CH + / −

• Press CH ▼ (Down) / ▲ (Up - 1 raised dot on the Rear panel or

Front panel) or press CH + / − on the Remote control.

To select Channels by using the NUMBER buttons

• For Digital channels, press a number followed by a dot “•” and the

corresponding sub channel number.

– When selecting Digital channel 11.1

Be sure to press • before entering the subchannel number.

– When selecting cable or Analog channel 11

Press PREV.CH to return to the previously viewed channel.

* On the 46” & 50” TV’s All CONTROL Keys are located on the Rear

(lower right) side of the unit as viewed from the Front.

Note

• Energy consumption contributes to air and water pollution. When the AC power cord

is plugged in, your TV consumes energy. Your TV has very low standby power

consumption.

50PFL3908 /

46PFL3908 /

46PFL3608 39PFL2908 /

39PFL2608

40PFL4908 /

32PFL4908 /

29PFL4908

* Key on Rear

50PFL3908 /

46PFL3908 /

46PFL3608 39PFL2908 /

39PFL2608

40PFL4908 /

32PFL4908 /

29PFL4908

* Key on Rear

Note

• To select the non-memorized channels, use the NUMBER buttons.

•Channel not available or No Signal will appear on the TV screen after the subchannel

broadcast is over.

•Audio Only message will appear on the TV screen, when you receive only sound

signal.

50PFL3908 /

46PFL3908 /

46PFL3608 39PFL2908 /

39PFL2608

40PFL4908 /

32PFL4908 /

29PFL4908

* Key on Rear

Digital TV operation

Analog/Cable TV operation

21 English

Watching channels from an external device

Switching Each Input Mode can easily switch with the remote control

between TV (DTV or Analog TV) and external devices when they are

connected to the unit.

1Turn On a set-top box or the connected device.

• The picture from your set-top box or the connected device

might appear automatically on the TV screen.

If the picture does not appear

Press SOURCE repeatedly to select the set-top box or the

connected device and wait a few seconds till the picture appears.

• Pressing ▲ reverses the direction of the Input modes.

2Use the remote control of the set-top box or the connected device

to select channels.

Access the Home menu

1Press (MENU).

Guide to Home menu

aWatch TV: Switches back to the antenna source if another

source is selected.

bNet TV: Accesses Net TV menus.

cAdd new devices: Adds new devices to the Home menu.

dBrowse USB: Accesses USB menus.

eBrowse PC: Accesses DLNA menus.

fSetup: Accesses menus that allow you to change

picture, sound and other TV settings.

Lock or unlock your device from the Home menu

This section describes how to lock or unlock specified device.

1Press (MENU) on the remote control.

2Use ▲▼◄► to select a device to lock or unlock.

3Press OPTIONS on the remote control.

4Use ▲▼ to select Device lock or Device unlock, then press OK.

• If device lock is unlocked, Device lock will be displayed. If device

lock is locked, Device unlock will be displayed and will be

displayed at the top right of the device icons.

5Enter your PIN. Change PIN ➟ p.33

• Once you have set PIN, PIN input menu does not appear after

the unit is Turned on.

Enable or disable RC key forwarding from the Home

This section describes how to enable or disable RC key forwarding for a

particular device.

1Press (MENU) on the remote control.

2Use ▲▼◄► to select a device to enable or disable RC key

forwarding.

3Press OPTIONS on the remote control.

4Use ▲▼ to select Enable RC key forwarding or Disable RC key

forwarding, then press OK.

• If RC key forwarding is set to off, Enable RC key forwarding will

be displayed. If RC key forwarding is set to on, Disable RC key

forwarding will be displayed and will be displayed at the top

right of the device icons.

HDMI1

HDMI2

HDMI3

Video

e.g.)

DTV / TV channel

11.1

HDMI1

HDMI2

Video

Component

HDMI3

Watch TV Browse USB Browse PC

Net TV Add new devices Setup

Note

• After selecting Add new devices, follow the on-screen instructions to select the

correct device and connector.

Note

• This function is available only when your devices are connected to this unit through

HDMI cables and assigned to an HDMI port (HDMI 1 to HDMI 3) with Add new

devices in the Home menu.

22 English

Using auto mode

1Press OPTIONS and select Auto picture or Auto sound to set

your TV to a predefined picture and sound setting.

2Use ▲▼ to select one of the following settings:

Create and use lists of favorite channels

You can create lists of your preferred TV channels so that you can find

those channels easily.

Select a list of favorite channels

1Press OPTIONS and select Favorites.

• Your lists of favorite channels are displayed.

2Use ▲▼ to select the desired list, then press OK.

Create or edit a list of favorite channels

1Press OPTIONS and select Favorites.

2Use ▲▼ to select the desired list, then press OK.

3Press OPTIONS to enter edit mode.

• A list of channels is shown.

4Use ▲▼ to select the desired channel, then press OK to add or

remove on the list of favorite channels.

• indicates that the channel is added.

• indicates that the channel is removed.

5Press (MENU) to exit.

Switch to one of the channels on a list

1Press OK to display the last list that you selected.

2Use ▲▼ to select a channel, then press OK.

• The TV switches to that channel.

Auto picture Auto sound Description

Personal The customized settings you defined using

the Picture and Sound menu

Standard For normal TV viewing

Vivid Enhanced picture contrast, sharpness and

sound for viewing in a well-lit room

Sports Brilliant picture settings and clear sound for

high action

Movie Deep picture and powerful sound settings

for a cinematic experience

Game - Optimized for PCs and game consoles

Energy saving - Eco TV settings for low power

consumption

Internet video

-Optimized for low bitrate Internet video

-Music

Optimized for music playback

-News

Set the anchor's voice at a comfortable

volume

Note

•Press CH + / − to select channels in a list or press the NUMBER buttons to select

channels that are not in a list. .

23 English

Changing picture format

Display modes can be selected when your TV receives a 16:9 or 4:3

video signal.

Three types of display modes can be selected for a PC Input signal.

Press FORMAT repeatedly to switch the TV aspect ratio.

For 16:9 video signal

* This part differs depending on the product you have.

•"Unscaled" for 50PFL3908, 46PFL3908, 46PFL3608, 40PFL4908,

39PFL2908, 39PFL2608.

•"Full" for 32PFL4908, 29PFL4908.

For 4:3 video signal

For PC Input signal

• This unit can also be connected to your PC that has a DVI terminal.

Use an HDMI-DVI conversion cable for this Video connection and

it requires Stereo mini 3.5mm plug Audio cable for Analog Audio

signal as well.

• Refer to 16:9 video signal on this page if PC has HDMI Output.

TV screen information

You can display the currently selected channel or other information such as

the aspect ratio on the TV screen.

In the Digital mode, the detailed broadcasting information for the current

off-the-air channel such as program title and program guides are displayed.

1Press INFO.

abroadcast station

bchannel number / Input mode

Switching channels ➟ p.20

Watching channels from an external device ➟ p.21

cprogram title (for DTV only)

dprogram’s image aspect ratio

Changing picture format ➟ p.23

eaudio language (DTV) / audio mode (Analog TV)

Sound ➟ p.29

fCC (not available if Closed Caption is set to Off)

Caption settings ➟ p.30

gchild lock rating

Child and ratings lock ➟ p.31

hremaining time of sleeptimer

Sleeptimer ➟ p.31

2Press INFO to hide the information.

Automatic

Other than DTV and HDMI connected devices, enlarges

the picture to best fit the screen. DTV and HDMI

connected devices display the picture at its original size.

The subtitles may remain visible.

4:3

Displays a 16:9 picture at a 4:3 size; the picture is

shortened horizontally. Sidebars appear on both edges of

the screen.

Wide screen Displays a 16:9 picture that is stretched horizontally and

vertically.

Unscaled or Full*

(1080i/p only) Displays a 16:9 picture at its original size.

Automatic

Other than DTV and HDMI connected devices, enlarges

the picture to best fit the screen.

DTV and HDMI connected devices display the picture at

its original size. The subtitles may remain visible.

Super zoom

Displays a 4:3 picture at a 16:9 size; the picture is stretched

horizontally and vertically and its left and right edges are

enlarged. This crops out the top and bottom of the picture.

4:3 Displays a 4:3 picture at its original size.

Sidebars appear on both edges of the screen.

Movie expand 14:9

Displays a 4:3 picture at a 14:9 size; the picture is stretched

horizontally and vertically.

This crops out the top and bottom of the picture. Sidebars

appear on both edges of the screen.

Movie expand 16:9

Displays a 4:3 picture at a 16:9 size; the picture is stretched

horizontally and vertically. This crops out the top and

bottom of the picture.

Wide screen Displays a picture that is stretched out of proportion to fill

the screen.

4:3Automatic

Wide screen

Unscaled or Full*

(1080i/p only)

Super zoom 4:3Automatic

Movie expand 16:9 Movie expand 14:9

Wide screen

4:3 Displays a proportionately stretched picture.

Sidebars appear on both edges of the screen.

Wide screen Displays a picture that is stretched out of proportion to fill

the screen.

Unscaled Displays a picture in its original size.

Note

• While the program guide is displayed, the Closed Caption function is interrupted.

• The information display will automatically disappear in 5 seconds.

Wide screen Unscaled4:3

11.1 KABC

A Day of Memories

Resolution 1080i

Picture format Wide screen

Sound mode Stereo

Audio language English

CC presence

Rating None

Sleeptimer

24 English

USB

Your TV is fitted with a USB connection that enables you to view photos,

listen to music or watch video files stored on a USB Memory Stick.

1Connect the USB Memory Stick to the USB terminal on the side of

your TV.

2Press (MENU) and use ▲▼◄► to select Browse USB, then

press OK.

3Use ▲▼ to select the Picture, Music or Video, then press OK.

• The files recorded under the following specifications are required.

• Press OPTIONS to display the optional menu, then press OK

to switch between List and Thumbnails.

Picture (JPEG)

1Use ▲▼ to select a file or a folder.

2Press OK or ►F to start a Slide show of the files.

• Press OK or ►F to pause the Slide show.

•The F icon appears.

• Press E or D to move between images.

• Press BACK or C to stop the Slide show.

• Press OPTIONS to display the optional menu, then use ▲▼

to select the desired item.

You can set

Slide time

and

Tr a n s i t i o n s

when images are in Slide show.

*2 You can set Rotate and Zoom when Slide show is in Pause mode.

Picture (JPEG)

Upper limit 16Mpixel

Music (MP3)

Sampling frequency 32 kHz, 44.1 kHz or 48 kHz

Constant bit rate 32 kbps - 320 kbps

Video

Maximum size of

a video 1920 x 1080

Extension .mpg, .mpeg .vob .avi .mp4

Video codec

Audio codec

MPEG1,

MPEG2 MPEG2 MPEG4 SP,

MPEG4 ASP

H.264,

MPEG4

Dolby Digital YES YES YES NO

MPEG1 audio layer3

(MP3) YES NO YES NO

MPEG1 audio layer2 YES NO YES NO

LPCM YESNONONO

AAC-LC NO NO NO YES

Note

• Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.

• Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.

• Up to 255 English characters can be recognized.

• This unit does not support MTP(Media Transfer Protocol).

• This unit supports FAT16 and FAT32 file systems.

• If the file is not supported, an error message appears.

• When the USB Memory Stick is not recognized, try reconnecting it again.

• We cannot be held responsible if your USB Memory Stick is not supported, nor will

we accept any liability for damage or loss of stored data.

• A file name exceeding 256 characters or contains a dot character is not supported on

this TV.

• Progressive JPEG files are not supported.

Picture avi

jpg

Music mp3

Image1.jpg

Video Image2.jpg

Image3.jpg

Image4.jpg

Image5.jpg

Slide time*1

Short Switches to the next image in 5 seconds.

Medium Switches to the next image in 10 seconds.

Long Switches to the next image in 15 seconds.

Tr a n s i t i o n s *1

None No effect when switching images.

Dissolve Overlaps a next image on a current image.

Wipe right Pushes a current image out from left.

Wipe left Pushes a current image out from right.

Wipe up Pushes a current image out from bottom.

Wipe down Pushes a current image out from top.

Box in A next image comes into the center from out.

Box out A next image goes to the out from center.

Auto picture

Selects the picture mode according to your preference.

(Standard, Vivid, Sports, Movie, Game, Energy saving and

Internet video)

Rotate*2

0Displays an image at its original direction.

90 Rotates an image clockwise by 90 degrees.

180 Rotates an image clockwise 180 degrees.

270 Rotates an image clockwise 270 degrees.

Zoom*2

1X Displays an image at its original size.

2X Magnifies a current image by 2 times.

4X Magnifies a current image by 4 times.

avi Image4.jpg

jpg Image5.jpg

mp3 Image6.jpg

Image1.jpg Image7.jpg

Image2.jpg Image8.jpg Image4.jpg

11/11/2011 11:11 AM

800×600 pixels

Image3.jpg

25 English

Music (MP3)

1Use ▲▼ to select a file or a folder.

2Press OK or ►F to play the selected files.

• Press OK or ►F to pause, then press OK or ►F again to

resume.

• Press D to skip to the next file.

• Press E to return to the beginning of the file currently playing.

• Press C to stop playback.

• Press OPTIONS to display the optional menu, then use ▲▼

to select the desired item.

Video

1Use ▲▼ to select a file or a folder.

2Press OK or ►F to play the selected files.

• Press OK or ►F to pause, then press OK or ►F again to

resume.

• Press D to fast-forward search.

• Press E to fast-backward search.

• Press C to stop playback.

Press ►F to resume from the point at which playback was

stopped. Press OK to play from the beginning of the file.

• Press OPTIONS to display the optional menu, then use ▲▼

to select the desired item.

Repeat

Off Sets repeat playback to Off.

On Sets repeat playback for all MP3 files in the

current folder.

Shuffle

Off Sets shuffle playback to Off.

On Sets shuffle playback for all MP3 files in the

current folder.

TV speakers

Off The sound will not be output from the unit's

speakers.

On The sound will be output from the unit's

speakers.

Speakers

EasyLink

You can control Audio Output from your

connected EasyLink Compliant Devices with

VOL + / − by using this unit's remote control.

Auto sound Selects the sound mode according to your preference.

(Standard, Vivid, Sports, Movie, Music and News)

Note

•TV speakers will be displayed only when Master EasyLink is set to On.

EasyLink (HDMI CEC) ➟ p.36

avi Track4.mp3

jpg Track5.mp3

mp3 Track6.mp3

Track1.mp3 Track7.mp3

Track2.mp3 Track8.mp3 Title:

Artist:

Album:

Duration: 00:05:28

Ye a r :

Track3.mp3

TV speakers

Off The sound will not be output from the unit's

speakers.

On The sound will be output from the unit's

speakers.

Speakers

EasyLink

You can control Audio Output from your

connected EasyLink Compliant Devices with

VOL + / − by using this unit's remote control.

Auto picture

Selects the picture mode according to your preference.

(Standard, Vivid, Sports, Movie, Game, Energy saving and

Internet video)

Auto sound Selects the sound mode according to your preference.

(Standard, Vivid, Sports, Movie, Music and News)

Note

• The resume information will be kept even when the unit is Turned Off.

• If you play another file while the previously viewed file is being resumed, the resume

information of the previously viewed file will be deleted.

• The file or the folder in resume stop mode will be highlighted in gray on List or

Thumbnails.

•TV speakers will be displayed only when Master EasyLink is set to On.

EasyLink (HDMI CEC) ➟ p.36

avi Movie4.avi

jpg Movie5.avi

mp3 Movie6.avi

Movie1.avi Movie7.avi

Movie2.avi Movie8.avi Title:

Director:

Date:

Duration:

Movie3.avi

26 English

5 Use more of your TV

This section describes the overview of the Setup menu displayed when

you press (MENU) and use ▲▼◄► to select Setup.

The Setup menu consists of the function setting items below.

1Press (MENU) to display the Home menu.

2Use ▲▼◄► to select Setup, then press OK.

3Use ▲▼ to select the desired menu and an item, then press OK

or use ▲▼◄► to determine the setting.

4When the Setting is completed, press (MENU) or BACK to

exit.

Watch TV Browse USB Browse PC

Net TV Add new devices Setup

Picture

Sound

Settings assistant

Features

Installation

Software

Start now

➟ p.27

Interactive wizard which guides you to get the best picture

and sound settings.

➟ p.27

Adjusting the Picture Mode or customize the Picture quality

as your preference.

➟ p.29

Adjusting the Sound Mode, Equalizer and some other

Sound functions.

➟ p.30

Adjusting the Closed Caption, Parental Guide and some

other useful functions.

➟ p.33

You can choose language, scan the channels available in

your area or make the Network settings.

➟ p.40

You can check the current software version, update the

software or deactivate the setting for Netflix and VUDU.

Settings assistant

Picture

Sound

Features

Installation

Software

27 English

Before you begin:

Yo u m u s t S e t Home in Location. ➟ p.35

Otherwise, personalized Picture and Sound settings will not be

Memorized after the unit goes into Standby mode.

1Press (MENU) and use ▲▼◄► to select Setup then press

OK.

2Use ▲▼ to select Settings assistant, then press OK.

3Press OK to begin Settings assistant.

4Follow steps 8 to 11 in Initial setup.➟ p.18

Before you begin:

Yo u mu s t S e t Home in Location. ➟ p.35

Otherwise, personalized Picture and Sound settings will not be

Memorized after the unit goes into Standby mode.

1Press (MENU) and use ▲▼◄► to select Setup then press

OK.

2Use ▲▼ to select Picture, then press OK.

3Use ▲▼◄► to select the item you want to adjust, then press

OK.

• The following picture settings can be configured. Depending on

the format of the picture Source, some picture settings are not

available.

Settings assistant

Picture

Sound

Settings assistant

Features

Installation

Software

Start now

Auto picture

to select the desired setting, then press OK

(Personal, Standard, Vivid, Sports, Movie, Game and

Energy saving and Internet video)

When you adjust the following settings, Personal

picture will be set automatically.

Advanced settings

to select the desired setting, then press OK

(Color alignment, Noise reduction, Light sensor*1,

Black stretch, Dynamic contrast, Gamma, Motion

Rate, Dynamic backlight*2, MPEG artifact reduction,

Color enhancement, Custom color management and

Film mode)

Picture format

Automatic

Changing picture format

➟ p.23

Super zoom

4:3

Movie expand 14:9

Movie expand 16:9

Wide screen

Unscaled

Picture

Sound

Settings assistant

Features

Installation

Software

Auto picture

Backlight

Contrast

Brightness

Color

Tint

Advanced settings Color alignment

Sharpness

Personal

Cursor ◄Cursor ►

Backlight to reduce power

consumption

to set the backlight

brighter

Contrast to decrease contrast to increase contrast

Brightness to decrease brightness to increase brightness

Color to decrease color

intensity

to increase color intensity

Tint to add green to add red

Sharpness to soften to sharpen

Continued on next page.

28 English

You can set a particular about picture quality in Advanced settings.

*1 50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 / 39PFL2908 /

39PFL2608 only.

*2 50PFL3908 / 46PFL3908 / 46PFL3608 / 40PFL4908 only.

Mode selection

to Turn Off image enhancement

features which makes the TV to

act purely as a monitor

HDTV

to enable image enhancement

features to improve picture

quality

Auto adjustment to adjust the horizontal / vertical position, clock and

phase of the PC screen automatically

Cursor ◄Cursor ►

Clock to decrease setting

value to increase setting value

Phase

Horizontal position

to move PC screen

left to move PC screen right

Ver tical p osition

to move PC screen

down to move PC screen up

Color alignment

Mode

to set the color temperature to

Personal, Cool, Normal and Warm

When you adjust the following

settings, Personal will be set

automatically.

Noise reduction to select the desired setting, then press OK

(Off, Minimum, Medium, Maximum and Auto)

Light sensor*1

Off to set Light sensor to Off

to adjust backlight for the best picture

quality by dynamically adjusting the

backlight intensity in accordance with

lighting condition in the room

Black stretch to select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

Color alignment

Noise reduction

Light sensor

Black stretch

Dynamic contrast

Gamma

Dynamic backlight

Motion Rate

Mode

Auto

Medium

Maximum

Off

Auto picture

Backlight

Contrast

Brightness

Color

Tint

Advanced settings

Sharpness

Cursor ◄Cursor ►

Red gain to decrease

contrast with red

to increase

contrast with red

Green gain

to decrease

contrast with

green

to increase

contrast with

green

Blue gain to decrease

contrast with blue

to increase

contrast with blue

Red offset

to decrease

brightness with

red

to increase

brightness with

red

Green offset

to decrease

brightness with

green

to increase

brightness with

green

Blue offset

to decrease

brightness with

blue

to increase

brightness with

blue

Dynamic contrast to select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

Gamma Cursor ◄Cursor ►

to adjust the gamma encoding of images

Motion Rate Off to set Motion Rate to Off

On to make the video appear smooth

Dynamic

backlight*2 to select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

MPEG artifact

reduction

to select the desired setting, then press OK

(Off, Minimum, Medium and Maximum)

Color

enhancement

Off to set color enhancement to Off

On to make colors more vivid and bright

Custom color

management

to select the desired setting, then press OK

(Red, Yellow, Green, Cyan, Blue and Magenta)

Cursor ◄Cursor ►

Tint

to rotate only

selected color tint

in clockwise

direction

to rotate only

selected color tint

counterclockwise

direction

Saturation

to decrease color

with only selected

color

to increase color

with only selected

color

Brightness

to decrease

brightness with

only selected color

to increase

brightness with

only selected color

Film mode

Off to set film mode to Off

Auto to optimize the picture recorded by

the original film

Note

•Mode selection is available only if

– the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.

– the connected HDMI device is outputting a video signal.

• Adjusts backlight for the best picture quality by dynamically adjusting the backlight

intensity in accordance with lighting condition in the room when Light sensor*1 is set

to On. Please ensure the room lighting is stable and the light sensor is not blocked.

29 English

Before you begin:

You must set Home in Location. ➟ p.35

Otherwise, personalized Picture and Sound settings will not be

memorized after the unit goes into Standby mode.

1Press (MENU) and use ▲▼◄► to select Setup then press

OK.

2Use ▲▼ to select Sound, then press OK.

Use ▲▼◄► to select the item you want to adjust, then press

The following sound settings can be configured. Depending on the

format of the broadcasting, some sound settings are not available.

Adjust the tonal quality for each frequency.

Adjust the speakers to suit your listening preference.

You can select the Audio language while your TV is receiving the Digital

broadcasting.

You can select Main or SAP while your TV is receiving the Analog

broadcasting that has the SAP (Second Audio Program).

(It differs depending on the program.)

When you set to Main in Alternate audio above, you can select Mono

or Stereo if the Analog broadcasting is sending the MTS (Multichannel

television sound).

This selects sound modes for more spatial or surround sound

reproduction.

This function keeps a constant loudness differential between the TV

commercials and the programs.

You can select the Audio Output from the unit’s speakers or not. If your

amplifier is HDMI link function compatible and connected by an HDMI

cable to this unit, some sound operations such as volume up can be

changed by using this unit’s remote control. Make sure Master EasyLink

is set to On. ➟ p.36

Adjust headphone volume.

You can set the digital audio output format from SPDIF/ARC.

If a channel or Input device is too loud or too soft, navigate to that

channel or Input device.

Auto sound

to select the desired setting.

(Personal, Standard, Vivid, Sports, Movie, Music and

News)

When you adjust the following settings (Equalizer, SRS

TruSurround HD and Auto volume leveling), Personal

sound will be set automatically.

Equalizer

Cursor ◄Cursor ►

to adjust each level of tonal quality

Press BACK to go back to the previous menu.

Balance Cursor ◄Cursor ►

to adjust the balance of the right and left speakers

Sound

TV speakers

Headphone volume

Auto volume leveling

Off

SRS TruSurround HD

Digital audio language

English

Picture

Settings assistant

Auto sound

Equalizer

Personal

Start now

Sound

Features

Installation

Software

Balance

Digital audio

language

to select the language according to your preference.

(It differs depending on the program.)

Alternate audio Main to output main-audio

SAP to output second-audio program

Mono/Stereo Mono to output mono-audio

Stereo to output stereo-audio

SRS TruSurround

Off to set SRS TruSurround HD™ to Off

On to set SRS TruSurround HD™ to On

Auto volume

leveling

Off to remove the auto volume leveling

On to reduce volume differences between

the TV commercials and the programs

TV speakers

Off not to output sound from the unit’s

speakers

On to output sound from the unit’s speakers

Speakers

EasyLink

to control Audio Output from your

connected EasyLink Compliant Devices

with VOL + / − by using this unit's

remote control.

Headphone

volume

Cursor ◄Cursor ►

to decrease or increase volume

Digital output

format

PCM to output PCM signals.

Multichannel

to output multichannel signals.

(When the audio of the content is PCM,

it will be output in PCM even if

Multichannel is selected.)

Delta volume

Cursor ◄Cursor ►

to set a negative delta

volume level as per your

personal preferences

to set a positive delta

volume level as per your

personal preferences

Note

•Alternate audio and Mono/Stereo are not available when you watching TV programs

with a cable box or satellite set-top box connected through an HDMI cable or

Component / Composite Video cables.

Digital TV operation

Analog/Cable TV operation

30 English

1Press (MENU) and use ▲▼◄► to select Setup then press

OK.

2Use ▲▼ to select Features, then press OK.

3Adjust the following items.

Caption settings

Closed Captioning displays the audio portion of programming as text

superimposed over the video.

1Use ▲▼ to select Caption settings, then press OK.

In addition to the basic Closed Caption, DTV has its own Closed

Caption called Digital caption service. Use this menu to change the

settings for Digital caption service.

You can choose the size, font, color, background and other

characteristics of the caption text.

• Review your setting choice made below by looking in the upper

left corner of the displayed setting box (not all selections show

the differences selected).

• There are 3 display modes according to programs:

Continued on next page.

Closed Caption

Off not to display the Closed Caption

On to display the Closed Caption

CC w/

mute

to display the Closed Caption when you

set to mute

Note

• You can cycle through the Closed Caption settings by pressing CC.

Features

Change PIN

Picture

Settings assistant

Caption settings

Sleep timer

Closed captions

Channel lock

Start now

Sound

Features

Installation

Software

Child lock

Digital caption options

Closed captions

Caption service

Off

CC-1

CS-1

Reset to default

Digital caption service

Change PIN

Caption settings

Sleep timer

Child lock

Digital caption

service

CS-1

CS-6

Selects one of these before changing

any other item in Caption settings

menu. Choose CS-1 under normal

circumstances.

Digital caption

options

Reset to

default

You can reset the status of Digital

caption options.

You can change Closed Captioning font style, size, color

and transparency.

(Font style, Font size, Font color and Font opacity)

You can change background color and transparency of

the displayed caption.

(Background color and Background opacity)

You can change edge color and type of the displayed

caption.

(Edge color and Edge type)

Caption service

CC-1

and

T- 1

The primary caption and text services.

The captioning or text is displayed in the

same language as the program’s dialog

(up to 4 lines of script on the TV

screen).

CC-3

and

T- 3

Serve as the preferred data channels.

The captioning or text is often a

secondary language.

CC-2,

CC-4,

T- 2

and

T- 4

Rarely available and broadcasters use

them only in special conditions, such as

when CC-1 and CC-3 or T- 1 and T- 3

are not available.

Paint-on Displays input characters on the TV screen

immediately.

Pop-on Once characters are stored in memory, they are

displayed all at once.

Roll-up Displays the characters continuously by scrolling

(max. 4 lines).

Digital TV operation

So, you must be Philip. Hi!So, you must be Philip. Hi!

I’m pleased to meet you.I’m pleased to meet you.

So, you must be Philip. Hi!

I’m pleased to meet you.

Picture display

Background

(Background color and Background opacity)

Edge

(Edge color and Edge type)

Font

(Font style, Font size, Font color and Font opacity)

Analog/Cable TV operation

31 English

Sleeptimer

Sleep timer can set the unit to go into Standby mode after an

incremental period of time.

1Use ▲▼ to select Sleeptimer, then press OK.

2Use ► repeatedly to change the amount of time

(increases the time by 5 minutes up to 180 minutes).

• Each press of ◄ will decrease the time by 5 minutes.

• Press INFO once to call up the display for checking the

remaining time.

• To cancel the sleep timer, press ► repeatedly until “ 0 ” is

displayed.

Child and ratings lock

You can prevent your children from watching certain programs or

certain channels by locking the TV controls and by using ratings.

1Use ▲▼ to select Child lock, then press OK.

2Use the NUMBER buttons to enter the 4-digit numbers for your

PIN code.

• When you have not set up your PIN code, enter 0, 0, 0, 0.

• When the PIN code is correct, Child lock menu is displayed.

See the following description for setting each item.

Continued on next page.

Note

•Digital caption service that you can switch differs depending on the broadcast

description.

• Closed Captioning service may not be controlled by this unit’s menu options if you are

watching television through an external cable or satellite set-top box. In which case

you will need to use the menu options on the external set-top box to control Closed

Captioning.

• The captions do not always use correct spelling and grammar.

• Not all TV programs and product commercials include Closed Caption information.

Refer to your area TV program listings for the TV channels and times of Closed

Caption shows. The captioned programs are usually noted in the TV listings with

service marks such as CC.

• Not all captioning services are used by a TV channel during the transmission of a

Closed Caption program.

• Closed Caption will NOT be displayed when you are using an HDMI or a Component

(except for 480i) connection.

• To show the Closed Caption on your TV screen, broadcast signal must contain the

Closed Caption data.

• Not all TV programs and commercials have the Closed Caption or all types of the

Closed Caption.

• Captions and texts may not exactly match the TV voice.

• Changing channels may delay the Closed Caption for a few seconds.

• Adjusting or muting the volume may delay the Closed Caption for a few seconds.

• Abbreviations, symbols and other grammatical shortcuts may be used in order to keep

pace with the on-screen action. This is not a malfunction.

• The caption or text characters will not be displayed while the Home menu or

functions display is shown.

• If a black box appears on the TV screen, this means that the Closed Caption is set to

the text mode. To clear the box, select CC-1, CC-2, CC-3 or CC-4.

• If the unit receives poor quality television signals, the captions may contain errors or

there might be no captions at all. Some possible causes of poor quality signals are:

– Automobile ignition noise

– Electric motor noise

– Weak signal reception

– Multiplex signal reception (ghosts or screen flutter)

– Data dropout and Pixelation (for DTV only)

• The unit retains the Closed Caption setting if the power fails.

• When the unit receives special effects playback signal (e.g. Search, Slow and Still) from

a VCR’s video Output channel (ch3 or ch4), the unit may not display the correct

caption or text.

• The EUT setting that satisfies § 79.102 (e) is as follows:

Font: Mono-font

Character size: Large

Note

• When you select the higher rating and set it to , the lower ratings will be blocked

automatically.

• When you set the All to , all ratings return to automatically.

•Region ratings lock will be available when the unit receives a Digital broadcast using

the new rating system.

• To block any inappropriate programs, set your limits in TV ratings lock, Movie ratings

lock and Region ratings lock.

• For the United States, the unit may download the Region Ratings Lock Table, if

required.

• The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.

Change PIN

Picture

Settings assistant

Caption settings

Sleep timer

Closed captions

Channel lock

Start now

Sound

Features

Installation

Software

Child lock

Canadian English rating

Channel lock

TV ratings lock

Select

Movie ratings lock

Region ratings lock

Canadian French rating

Change PIN

Caption settings

Sleep timer

Child lock

32 English

Channel lock

Particular channels or external Input modes can be invisible in this

function.

3Use ▲▼ to select Channel lock, then press OK.

4Use ▲▼ to select the particular channels or external Input, then

press OK repeatedly to switch between view and block.

• indicates that the channel or Input Source is locked.

• indicates that the channel or Input Source is not locked.

Setting TV and movie ratings

Movie ratings lock is the rating system created by MPAA. TV ratings lock

has controlled access to individual programs based on their age ratings

and content rating.

3Use ▲▼ to select TV ratings lock or Movie ratings lock, then

press OK.

4Use ▲▼ to select the desired rating, then press OK repeatedly to

switch between view and block.

• indicates that the rating is locked.

• indicates that the sub rating is locked.

• indicates that the rating is not locked.

To set the sub ratings

For TV ratings lock, you can further set the sub ratings to block specific

elements of programming. To set the sub ratings, follow the step below.

Use ▲▼◄► to select the desired rating, then press OK repeatedly to

switch between and .

Continued on next page.

TV ratings lock

Movie ratings lock

Canadian English rating

Channel lock

TV ratings lock

Movie ratings lock

Region ratings lock

Canadian French rating

Change PIN

Caption settings

Sleep timer

Child lock

40.1 DTV

40.2 DTV

40.3 DTV

40.4 DTV

HDMI 1

HDMI 2

HDMI 3

Video

Canadian English rating

Channel lock

TV ratings lock

Movie ratings lock

Region ratings lock

Canadian French rating

All

None

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

Canadian English rating

Channel lock

TV ratings lock

Movie ratings lock

Region ratings lock

Canadian French rating

Change PIN

Caption settings

Sleep timer

Child lock

All

PG-13

NC-17

US movie

ratings US TV ratings Description

All All ratings locked including no rating

NR None No rating

–TV-Y

Appropriate for all children

–TV-Y7

Appropriate for all children 7 and older

GTV-G

General audience

PG TV-PG Parental guidance suggested

PG-13 – Unsuitable for children under 13

–TV-14

Unsuitable for children under 14

R–

Restricted under 17 requires accompanying

parent or adult guardian

NC-17 – No one under 17 admitted

XTV-MA

Mature audience only

US TV ratings Sub Rating

TV-Y7 Fantasy Violence

TV-PG Dialog

Language

Sex

Violence

TV-14

TV-MA

Language

Sex

Violence

Note

• Blocked sub rating will appear beside the main rating category in

TV ratings lock

menu.

• You cannot block a sub rating if the main rating is set to .

• Changing the category to or automatically changes all its sub ratings to the same

( or ).

Canadian English rating

Channel lock

TV ratings lock

Movie ratings lock

Region ratings lock

Canadian French rating

All

None

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

Fantasy Violence

33 English

Canadian English or Canadian French ratings

You can select the rating for Canadian English or Canadian French

broadcasting.

3Use ▲▼ to select Canadian English rating or Canadian French

rating, then press OK.

4Use ▲▼ to select the desired rating, then press OK repeatedly to

switch between view and block.

• indicates that the rating is locked.

• indicates that the rating is not locked.

Change PIN

Although the default PIN code (0000) is supplied with the unit, you can

set your own PIN code.

1Use ▲▼ to select Change PIN, then press OK.

2Press the NUMBER buttons to enter the new 4-digit PIN code.

• Enter PIN code again to confirm.

1Press (MENU) and use ▲▼◄► to select Setup then press

OK.

2Use ▲▼ to select Installation, then press OK.

3Adjust the following items.

Language

1Use ▲▼ to select Language, then press OK.

2Use ▲▼ to select English, Español or Français, then press OK.

Canadian

English rating

Canadian

French rating Description

All Locked all ratings

EExempt program

C–

For all children

C8+ – For children over 8

GGeneral audience

–8ans+

Unsuitable for ages under 8

PG – Parental guidance suggested

– 13ans+ Unsuitable for ages under 13

14+ – Unsuitable for ages under 14

– 16ans+ Unsuitable for ages under 16

18+ 18ans+ Adult audience only

Note

• The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option

to block NR, None or E programs is used in Movie ratings lock, TV ratings lock,

Canadian English rating or Canadian French rating accordingly “unusual results may

occur and the unit may not receive emergency bulletins or other types of

programming”: / Emergency Bulletins (Such as EAS messages, weather warnings and

others) / Locally originated programming / News / Political / Public Service

Announcements / Religious / Sports / Weather.

Note

• Make sure new PIN code and confirm PIN code must be exactly the same. If they are

different, the space is cleared for reentering.

• If you have forgotten your PIN code, enter 0711 to reset the PIN code.

Change PIN

Please enter your current PIN.

Note

•

If you need the English menu instead of the Spanish or French menu’s, press (

Use ◄►▲▼ to select Configuración or Configuration, then press OK.

Use ▲▼ to select Instalación or Installation, then press OK.

Use ▲▼ to select Idioma or Langue, then press OK.

Use ▲▼ to select English, then press OK.

Press

(

)

to exit the Home menu.

Installation

Picture

Sound

Settings assistant

Features

Installation

Software

Language

Channels

Preferences

Network

Restore default settings

English

Auto program

Location

Reset AV settings

Network settings a

Picture

Sound

Settings assistant

Features

Installation

Software

Language

Channels

Preferences

Network

Restore default settings

English

Français

Español

34 English

Channel installation

Be sure the RF cable is correctly connected to this unit and you are

registered with your cable TV provider when you install cable channels.

Autoprogram

If you switch wires (e.g. between antenna and CATV) or if you move the

unit to a different area after the initial setting, or if you restore the DTV

channels you deleted, it is recommended to use AutoProgram to

perform a new channel search.

You need to select the signal type in Installation mode before you

perform AutoProgram.

1Use ▲▼ to select Channels, then press OK.

2Use ▲▼ to select Autoprogram, then press OK.

•If you run Autoprogram when you have locked channels, a

message appears asking to enter your PIN code. Enter your PIN

code in order to complete the installation. You need to set the

channel lock again after the installation.

3Press OK to select Start now.

• When the scanning and memorizing are completed, the lowest

memorized channel will be displayed.

4Follow the on-screen instructions to complete the installation.

Weak channel installation

This function lets you add the channels that were not added by the

AutoProgram due to the reception conditions during the initial setup.

It is available only when you select Antenna in Installation mode.

1Use ▲▼ to select Channels, then press OK.

2Use ▲▼ to select Weak channel installation, then press OK.

• The PIN code will be required if you have locked channels.

3Use ◄► to select channel Input box, then use ▲▼ to select a

channel you want to memorize.

4Use ◄► to select Search, then press OK.

5Display will be changed to Store from Search when the channel is

found, then press OK.

Installation mode

1Use ▲▼ to select Channels, then press OK.

2Use ▲▼ to select Installation mode, then press OK.

3Use ◄► to select Antenna or Cable, then press OK.

•When Antenna is selected, the TV detects antenna signals. It

searches for DTV and Analog TV channels available in your area.

•When Cable is selected, the TV detects signals supplied by cable.

It searches for DTV Analog TV and Cable channels available in

your area.

Uninstall channels

The channels selected here can be skipped when selecting the channels

using CH + / −.

Those channels can still be selected with the NUMBER buttons.

1Use ▲▼ to select Channels, then press OK.

2Use ▲▼ to select Uninstall channels, then press OK.

Use

▲▼

to select the channel you want to remove, then press

• The removed channels are not displayed on the list of favorite

channels.

• To reactivate a removed channel, use ▲▼ then press OK.

Note

• After setting Autoprogram, using CH + / − skips unavailable programs automatically.

• If you are not receiving a signal from your cable service, contact the cable provider.

• If you press or during AutoProgram, the setup of TV channels will be canceled.

•Even if Autoprogram is completed, the channel setting will be lost if the AC power

cord is unplugged before the unit goes into Standby mode by pressing .

• The PIN code will be required once you set a PIN code in the Child and ratings lock.

➟ p.31

• If you want to change your PIN code, follow the instruction of Change PIN. ➟ p.33

System searching. Please wait…

Digital channels found: 0

Analog channels found: 0

Stop

Auto programming may take more than 20 minutes to

complete.

Note

• In most cases, Digital channels are not broadcast on the RF channel on which they

appear on your TV. To add Digital channels you need to know the RF channel on

which the Digital channel is being broadcast. (e.g. If there is a Digital channel 9.1 which

is being broadcast on RF channel 25, you need to enter 25 while performing a weak

channel installation.) To find out the RF channel on which a particular Digital channel is

being broadcast, please contact your local service provider.

Installing Digital channels using Weak channel installation might not work for direct

cable connections and if the Digital signal is too weak for the TV to process.

35 English

Preferences

You can set the unit to reduce the power consumption or adjust the

backlight brightness in Location setting.

In TV placement setting, you can set the unit placement in order to

obtain the best sound effect.

EasyLink allows you to operate your connected EasyLink device.

Setting your location to home

Choosing Home gives you full flexibility to change predefined settings for

picture and sound.

1Use ▲▼ to select Preferences, then press OK.

2Use ▲▼ to select Location, then press OK.

3Use ▲▼ to select Home, then press OK.

TV placement

To apply the best settings for your TV, select wall mount or stand mount.

1Use ▲▼ to select Preferences, then press OK.

2Use ▲▼ to select TV placement, then press OK.

3Use ▲▼ to select Wall mounted or On a TV stand, then press

OK.

E-sticker

When you set Location to Retail, E-sticker (Electronic Sticker) is

displayed. E-sticker can be Turned Off using procedure below.

1Use ▲▼ to select Preferences, then press OK.

2Use ▲▼ to select E-sticker, then press OK.

3Use ▲▼ to select Off, then press OK.

Use Philips EasyLink

Your TV supports Philips EasyLink, which enables one-touch play and

one-touch Standby between EasyLink-compliant devices. Compliant

devices must be connected via an HDMI connector.

One-touch play

When you connect your TV to devices that support one-touch play, you

can control your TV and the devices with one remote control. For

example, when you press ►(play) on your DVD remote control, your

TV automatically switches to the correct channel to show the DVD

content.

One-touch Standby

When you connect your TV to devices that support Standby, you can

use your TV remote control to put your TV and all connected HDMI

devices in Standby mode. You can perform one-touch Standby using the

remote control from any of the connected HDMI devices.

System audio control

When you connect your TV to HDMI CEC compliant devices, your TV

can switch automatically to play audio from the connected device. To

use one-touch audio, you must map the audio input from the connected

device to your TV. You can use the remote control from the connected

device to adjust the volume.

Remote control (RC) key forwarding

RC key forwarding allows you to control EasyLink-compliant devices

using your TV remote control.

HDMI-ARC (Audio Return Channel) (HDMI 1 only)

HDMI-ARC allows you to use Philips EasyLink to output TV audio

directly to a connected Audio device, without the need for an additional

Digital Audio cable. Be sure that the device is HDMI CEC and ARC

compliant, and that the TV is connected to the device using an HDMI

cable attached to both HDMI-ARC connectors.

Retail

The unit will be set up with predefined settings for

retail displays. In this setting, the power consumption

may possibly exceed the limit requirement of the

ENERGY STAR® qualification.

Home

This setting is ENERGY STAR® qualified.

The unit is set to maximize the energy efficiency for

home setting and it can be adjusted through a choice

of picture and sound quality according to your

preference.

Note

• You must set Home. Otherwise, personalized picture and sound settings will not be

memorized after the unit goes into Standby mode.

• If you select Home, E-sticker will not be displayed.

Location

EasyLink

TV placement

Language

Channels

Preferences

Network

Restore default settings

Retail

Home

Note

• Philips does not guarantee 100% interoperability with all HDMI CEC devices.

• The EasyLink-compliant device must be Switched On and selected as the source.

36 English

EasyLink (HDMI CEC)

This function allows you to operate the linked functions between our

brand devices with a EasyLink feature and this unit connecting through

an HDMI cable. You must connect this unit to our brand EasyLink

devices and be sure its EasyLink setting is also set to On.

1Use ▲▼ to select Preferences, then press OK.

2Use ▲▼ to select EasyLink, then press OK.

3Use ▲▼◄► to select the item you want to adjust, then press

OK.

Set the Master EasyLink to On or Off. The following additional settings

will be grayed out when you set to Off.

This unit will Turn On when the Power On signal is sent from your

connected EasyLink device.

You can operate some functions such as disc playback or call up the

menu of the connected devices, by using this unit’s remote control.

You can set each HDMI input to activate the RC key forwarding. Each

press of OK will toggle RC key forwarding On or Off.

• indicates that the RC key forwarding is On.

• indicates that the RC key forwarding is Off

HDMI-ARC allows you to use Philips EasyLink to output TV Audio

directly to a connected Audio device, without the need for an additional

Digital Audio cable

Device list

This function lets you see the product model number or name of

connected devices.

Use ▲▼ to select the desired EasyLink devices listed on the TV screen,

then press OK.

Your connected EasyLink device will be Turned On if the device is in

Stand by mode.

Master EasyLink

Off Disables all EasyLink.

Selects if you have connected an

external device that is compatible with

the EasyLink function.

Auto TV on

Off

This unit stays in Standby mode even if

you Turn On your connected EasyLink

device.

This unit Turns on automatically when

you Turn On your connected EasyLink

device.

RC key forwarding

HDMI1

PLAY, PAUSE

►

STOP

FWD

REV

OPTIONS

/ ▲▼◄► /

BACK

the NUMBER buttons

can

be used to control your connected

EasyLink devices by this unit’s remote

control.

HDMI2

HDMI3

HDMI-ARC

(HDMI 1 only)

Off Disable HDMI-ARC.

You can output TV Audio through the

HDMI cable solely, provided both the TV

and device are HDMI-ARC compliant.

Master EasyLink

Auto TV On

RC Key forwarding

HDMI-ARC

Device List

Location

EasyLink

TV placement

Select

Off

Select

Device list

Refresh

Back

HDMI 1: DVD recorder

HDMI 2: Blu-ray disc player

HDMI 3: Home theater system

37 English

Network

Set up network connection settings in order to use Net TV or network

upgrade function.

1Use ▲▼ to select Network, then press OK.

Network settings assistant

Before you proceed to

Connection test

or other settings in

Network

section,

run the

Network settings assistant

to connect the TV to your network

2Use ▲▼ to select Network settings assistant, then press OK.

3Press OK to select Start now.

Wireless setting

Select to use a wireless LAN to connect to the Internet by wireless

connection.

4Use ▲▼ to select Wireless, then press OK.

5Use ▲▼ to select the desired setting, then press OK, and follow

the on-screen directions.

*1 WPS (Easy Connect) cannot be used when the security protocol is set to

WEP. Change the Access Point’s security mode from WEP to WPA or WPA2

(recommended).

Wired setting

Select to use an Ethernet cable to connect to the Internet by wired

connection. Please purchase shielded Ethernet cables at your local store

and use it when you connect to network equipment.

4Use ▲▼ to select Wired, then press OK.

•Connection test will start automatically. ➟ p.39

Manual network settings

2Use ▲▼ to select Manual network settings, then press OK.

Network selection

3Use ▲▼ to select Network selection, then press OK.

4Use ▲▼ to select the desired setting, then press OK.

• The meanings of abbreviations are defined as below.

AP: Wireless LAN Access Point

WPS: Wi-Fi protected Setup

SSID: Wireless network name

• The key entry screen will appear when you select SSID, WEP /

WPA / WPA2 or Proxy address.

• Enter the key of the selected wireless network using ▲▼◄►,

then press OK.

Clear: Clear the entered number or word.

All clear: Clear all the entered numbers or words.

a/A/@: Switch between abc, ABC and @!?

Cancel: Shows the cancellation display.

OK: Set the entered number or word.

1234567890

abcde f gh i j

klmnopqrst

uvwxyz . -_

―

Clear All clear a/A/@ Cancel OK

Picture

Sound

Settings assistant

Features

Installation

Software

Language

Channels

Preferences

Network

Restore default settings

English

Autoprogram

Location

Network settings a

Reset AV settings

Channels

Preferences

Language

Network

Restore default settings

Network settings assistant

Manual network settings

Connection test

Setting status

Home network

Reset network settings

Start now

Network selection

Start now

Information

Renderer

Start now

Easy connect

Select this setting if your router has a WPS button.

Start scanning for wireless networks on the TV after

pressing the WPS button on your router. If

connection test fails, try Easy connect again.*

If it fails then refer to the router’s manual for more

details.

Scan

Search for wireless networks automatically and

select the SSID from the list. Wireless network

setting ➟ p.38

Manual Set up the connection to the AP (e.g. wireless

router) manually by entering the SSID.

Wired If you connect to an Ethernet cable, select Wired

to connect to the Internet.

Wireless If you have a router with WPS function, select

Wireless to connect to the Internet.

This TV can be connected to your

If not connected to the network,

the latest TV software can be

downloaded from

www.philips.com/support

home network.

Select your connection type.

Wireless

Wired

Cancel

Network settings assistant Network selection Wireless

Manual network settings Wireless network setting Auto

Connection test IP configuration IP setting mode

Setting status Proxy configuration Proxy setting

Home network

Reset network settings

Continued on next page.

38 English

Wireless network setting

This menu is displayed only when you set Wireless in Network

selection. In order to use a wireless network, you must set up a

connection to the AP (e.g. wireless router).

3Use ▲▼ to select Wireless network setting, then press OK.

Auto

Search for wireless networks automatically and select the SSID from the

list.

4Use ▲▼ to select Auto, then press OK.

5The list of wireless networks will be displayed.

Use ▲▼ to select the appropriate the SSID, then press OK.

• If you select the SSID with , WEP*2 / WPA / WPA2 Key entry

screen will appear.

Enter the WEP*2 / WPA / WPA2 key of the selected wireless

network using ▲▼◄►, then press OK.

• If you select the SSID has a WPS, the WPS setting screen will

appear.

Use ▲▼◄► to select a setting, then press OK.

*1WPS (Easy Connect) cannot be used when the security protocol is set to

WEP. Change the Access Point’s security mode from WEP to WPA or WPA2

(recommended).

*2WEP is not recommended to be used due to its Major security flaws. Change

the Security protocol on the wireless router to WPA or WPA2

(recommended) mode.

Confirmation message will appear. Select OK to complete the settings.

Manually enter your SSID

Set up the connection to the AP (e.g. wireless router) manually by

entering the SSID.

4Use ▲▼ to select Manually enter your SSID, then press OK.

• AP (e.g. wireless router) SSID entry screen will appear.

Enter the SSID using ▲▼◄►, then press OK.

5Use ▲▼ to select the authentication setting of the selected

wireless network.

• For a wireless network with authentication setting, select the

authentication setting, according to the security type of the

wireless network.

• For a wireless network without authentication setting, select

None.

•If you select WEP*2, WPA-PSK or WPA2-PSK, WEP*2 / WPA /

WPA2 Key entry screen will appear.

Enter the WEP*2 / WPA / WPA2 key of the selected wireless

network using ▲▼◄►, then press OK.

• Confirmation message will appear. Select Ye s to complete the

settings.

*2WEP is not recommended to be used due to its Major security flaws.

Change the Security protocol on the wireless router to WPA or WPA2

(recommended) mode.

Continued on next page.

Easy connect

Select this setting if your router has a WPS

button. Start scanning for wireless networks on

the TV after pressing the WPS button on your

router. If connection test fails, try Easy connect

again.*1

If it fails then refer to the router’s manual for

more details.

WPS code

Select this setting if your router has a WPS but

does not have a WPS button. Enter the 8-digit

WPS PIN code shown on your TV in the router

settings menu via PC before Connect is selected.

Manual

If your wireless network with authentication

setting (WEP*2, WPA-PSK or WPA2-PSK),

WEP*2 / WPA / WPA2 Key entry screen will

appear. Enter the WEP*2 / WPA / WPA2 key of

the selected wireless network using ▲▼◄►,

then press OK.

Note

• For a wireless network with authentication setting, key icon appears to the right hand

of the SSID.

• Signal icon shows the strength of the signal.

•WEP*

2 / WPA key appears as asterisks on the confirmation screen.

• The wireless LAN supports following specifications.

– Wireless standards: IEEE 802.11 b/g/n

– Frequency spectrum: 2.4GHz

– Security protocol: WEP*2 / WPA / WPA2

Router 1

Auto Enter Key

Manually enter your S Router 2 Select

Router 3 Enter Key

Router 4 Select

None Set the authentication setting to None.

WEP Set the authentication setting to WEP*2.

WPA-PSK Set the authentication setting to WPA-PSK

WPA2-PSK Set the authentication setting to WPA2-PSK.

Select security type for

"Router 1" None

WEP

WPA-PSK

WPA2-PSK

Back

39 English

IP configuration

In following cases, select IP configuration to set each setting as

necessary.

– When connection test failed with the setting of Connection test.

– When instructed by your Internet service provider to make specific

settings in accordance with your network environment.

3Use ▲▼ to select IP configuration, then press OK.

4Use ▲▼ to select a setting, then press OK.

*1Items can be selected only when IP setting mode is set to Manual.

*2Items can be selected only when DNS setting mode is set to Manual.

*3Use ▲▼ or the NUMBER buttons to input numbers. When you use ▲▼ to

input numbers, then press OK or input the triple digits by using the NUMBER

buttons, the cursor moves to the next entry field. When you use ▲▼ to

input numbers, then press OK or input the triple digits by using the NUMBER

buttons at the rightmost entry field, numbers will be stored and go back to the

previous menu.

Proxy configuration

3Use ▲▼ to select Proxy configuration, then press OK.

4Use ▲▼ to select a setting, then press OK.

•Do not use is selected for default settings.

• If you need to change the proxy setting as instructed by your

Internet service provider to set the designated proxy address and

port, select Use.

* Items can be selected only when Proxy setting is set to Use.

Connection test

Perform the following steps to test your Internet connection after you

have connected an Ethernet cable or entered network settings such as

IP address, DNS settings, etc. manually.

2Use ▲▼ to select Connection test, then press OK.

3Press OK to select Start now.

• Connection test will start automatically and the test result for

Home Network and Internet will appear right after the

connection test finishes.

•“Te s t i n g … ” is displayed while the connection test is in progress.

• If the connection test for Internet passes, speed test will start

automatically.

4Press OK to go to the list of network status confirmation screen.

IP setting

mode

Auto Sets the IP setting automatically.

Manual Sets the IP setting manually.

IP address*1, 3 A set of numbers which are assigned to

devices participating in a computer network.

Subnet mask*1, 3 A mask which is used to determine what

subnet an IP address belongs to.

Default gateway*1, 3 IP address of the network device (such as

router) which provides Internet access.

DNS setting

mode

Auto Sets the DNS setting automatically.

Manual Sets the DNS setting manually.

Primary DNS*2, 3 A server which handles the name and IP

address over the Internet.

Secondary DNS*2, 3 A server which handles the name and IP

address over the Internet.

MAC address

An address which recognizes the devices

connecting to the network. It is also called

Hardware Address.

Note

• The range of input numbers is between 0 and 255.

• If you enter a number larger than 255, the number will automatically be 255.

• The manually entered number will be saved even if you change the setting to Auto.

• If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next

cell.

• If the entered IP address or the default gateway or primary DNS number is same as

the default setting, IP address setting will be set to Auto. (The manually entered

number will be saved).

• When IP address setting is set to Manual, the setting of DNS setting will automatically

be Manual and when IP address setting is set to Auto, you can set either Auto or

Manual for DNS setting.

Network selection IP setting mode Manual

Wireless network setting IP address 192.168.11.3

IP configuration Subnet mask 255.255.255.0

Proxy configuration Default gateway 192.168.11.1

Primary DNS 192.168.11.1

Secondary DNS 0.0.0.0

MAC address 00:12:0E:10:09:15

Proxy setting

Do not use

Not use the proxy server.

Use Uses the proxy server.

Proxy address*Selects the number or word by using

▲▼◄►, then press OK.

Proxy port*Use ▲▼ or the NUMBER buttons to input

numbers.

Note

• The range of input numbers for the port number is between 0 and 65535.

(If you enter a number larger than 65535, it will be regarded as 65535.)

• For proxy port, the selected ports may be blocked and not be able to use depending

on your network environment.

• If the proxy address is entered with blank only, proxy server setting will be set to Do

not use.

Home network Internet Description

Pass Pass Connection test is successfully completed.

Fail - Connection test for Home Network failed.

Check the connection settings.

Pass Fail Connection test for Internet failed. Check the

connection settings.

Note

• If the connection test for both Home Network and Internet pass, you are ready to

use Net TV or network upgrade function using the internet without making any

additional settings.

• If the connection test fails, check if the Ethernet cable is connected to this TV properly or if

you have entered all the required details for the wireless LAN connection properly.

Network selection Proxy setting Do not use

Wireless network setting

IP configuration

Proxy configuration

40 English

Setting status

You can check the status of network settings.

2Use ▲▼ to select Setting status, then press OK.

• Network setting list will be displayed.

• MAC address of this unit will be displayed in the list.

Home network

You can turn your TV into Digital Media Renderer (DMR), which can

play video, music and photo files stored on DLNA certified home media

servers connected to your home network by using Digital Media

Controllers (DMC).

2Use ▲▼ to select Home network, then press OK.

Use ▲▼◄► to select the item you want to adjust, then press

Reset network settings

You can reset the status of network settings.

2Use ▲▼ to select Reset network settings, then press OK.

3Press OK to select Start now.

Return your settings to default values

You can return settings to their default values.

1Use ▲▼ to select Restore default settings, then press OK.

2Use ▲▼ to select Reset AV settings or Reset all settings, then

press OK.

3Press OK to select Start now.

Philips continuously tries to improve its products and we strongly

recommend that you upgrade the TV software when upgrades are

available.

New software can be downloaded from our website at

www.philips.com/support using the model number of your TV to find

information.

Press (

) and use ▲▼◄► to select

Setup

then press

2Use ▲▼ to select Software, then press OK.

Checking your current software version

1Use ▲▼ to select Software information, then press OK.

• The version and a description of the current software is displayed.

Preparing for the software upgrade

You require the following equipment:

– A PC with web browsing capability

– An archive utility that supports the ZIP-format

(e.g. WinZip for Windows or StuffIt for Mac OS)

– An empty clean formatted USB Memory Stick

Downloading the software

Find information and software related to your TV and download the

latest software upgrade file to your PC.

1On your PC, open a web browser and go to

www.philips.com/support.

2Enter the model number in the “Type the Model Number...” field.

3Click the desired software to be downloaded.

• Decompress the ZIP-file.

Copy the upgrade file to the root directory of the USB Memory Stick.

Renderer On Enable this unit to play files by using

DMC.

Off Disable DMR.

Renderer name Change the display name on DMC

Reset AV settings

Return picture and sound settings to their default

values. The channel installation settings are not

affected.

Reset all settings Return all the settings to their default values.

Software

Note

• Digital Rights Management

This product contains technology subject to certain intellectual property rights of

Microsoft. Use or distribution of this technology outside of this product is prohibited

without the appropriate license(s) from Microsoft.

Note

• Only FAT / DOS-formatted portable memory is supported.

• Use only software upgrades that can be found on the Philips web site.

Warning

• When the software upgrade is running, don’t press any buttons.

• Do not remove the USB Memory Stick during the software upgrade.

• If an error occurs during the upgrade, retry the procedure or for further assistance,

please contact Call Center.

Picture

Sound

Settings assistant

Features

Installation

Software

Software information

Software update

Automatically check for

Netflix deactivation

Netflix ESN

VUDU deactivation

YouTube deactivation

Hulu Plus deactivation

Select

USB

Off

Picture

Sound

Settings assistant

Features

Installation

Software

Software information

Software update

Automatically check for

Netflix deactivation

Netflix ESN

VUDU deactivation

YouTube deactivation

Hulu Plus deactivation

PHL-XXXX_XXX_X

41 English

Upgrading the software

USB upgrade

You can upgrade the software by using USB Memory Stick.

1Connect your USB Memory Stick with the upgrade file to the USB

terminal on the side of your TV.

2Use ▲▼ to select Software update, then press OK.

3Use ▲▼ to select USB, then press OK.

4Use ▲▼ to select the desired Update file.

5Use ◄► to select Ye s , then press OK.

6Read the on-screen instructions and confirm that you want to

continue with the installation.

7When the software upgrade is completed, press to set the unit

into Standby mode, then remove the USB Memory Stick.

8Unplug the AC power cord for a few seconds from AC outlet and

plug it again.

9Press again to Turn the unit On.

• The TV starts up with the new software.

For further assistance, please contact Call Center.

Network update

You can update the software by connecting the unit to the Internet.

1Use ▲▼ to select Software update, then press OK.

2Use ▲▼ to select Network, then press OK.

3Use ◄► to select Ye s , then press OK.

• This unit will then start checking for the latest firmware version.

4Confirmation message will appear.

Use ◄► to select Ye s , then press OK.

• The unit will start downloading the latest firmware version.

• The unit will start updating the firmware version.

• It may take a while to complete the updating.

5When the software update is complete, press to make sure the

unit goes to Standby mode.

6Unplug the AC power cord for a few seconds from AC outlet and

plug it again.

7Press again to Turn the unit On.

• The TV starts up with the new software.

For further assistance, please contact Call Center.

Recovery update

If the unit turns off during the software upgrade, an error message will

be displayed when you turn it on next time. In this case, please follow

the procedure below to start the software upgrade again. The unit will

not work correctly unless the software upgrade is completed.

1Follow steps 1 to 2 in Downloading the software ➟ p.40

2Click the software for recovery update to be downloaded.

• Decompress the ZIP-file.

Copy the

recovery update

file to the root directory of the USB

Memory Stick

4Connect the USB Memory Stick with the recovery update file to

the USB terminal on the side of your TV, then press OK.

5When the software update is complete, remove the USB Memory

Stick.

6Unplug the AC power cord for a few seconds from AC outlet and

plug it again.

• The TV starts up with the new software.

For further assistance, please contact Call Center.

Automatically check for latest software

This function lets you know if the latest software is available while the

unit is connected to the Internet.

1Use ▲▼ to select Automatically check for latest software, then

press OK.

2Use ▲▼ to select the desired option, then press OK.

Netflix deactivation

Displays the deactivation setting for Netflix.

1Use ▲▼ to select Netflix deactivation, then press OK.

2Use ▲▼ to select the desired option, then press OK.

Software update is in progress. Please wait.

Do not remove the USB storage device or turn the TV off while

upgrade is in progress.

Update your TV with new software:

Note

• In order to update software via the Internet, you must connect the unit to the Internet

and set up necessary settings. Network settings assistant ➟ p.37 Network ➟ p.37

• Please do not unplug the AC power cord or Ethernet cable while executing the

Network update.

• All settings will remain the same even if you update the software version.

• The version of Net service will also be updated if newer version of Net service is

available when updating the firmware.

Off Disable automatically check for latest software.

On A message will appear if there is the latest software on the

network server.

Off Deactivate the connection to Netflix.

On Activate the connection to Netflix.

42 English

Netflix ESN

Displays the ESN information.

1Use ▲▼ to select Netflix ESN, then press OK.

• Displays the ESN (Electronic Serial Number) to get any services

from Netflix.

VUDU deactivation

Displays the deactivation setting for VUDU.

1Use ▲▼ to select VUDU deactivation, then press OK.

2Use ▲▼ to select the desired option, then press OK.

YouTube deactivation

Displays the deactivation setting for YouTube.

1Use ▲▼ to select YouTube deactivation, then press OK.

2Use ▲▼ to select the desired option, then press OK.

Hulu Plus deactivation

Displays the deactivation setting for Hulu Plus.

1Use ▲▼ to select Hulu Plus deactivation, then press OK.

2Use ▲▼ to select the desired option, then press OK.

License

Displays the Licenses of Open Source Software used in this unit.

1Use ▲▼ to select License, then press OK.

• Licenses of Open Source Software used in this unit are displayed.

Ye s Deactivate the connection to VUDU.

No Activate the connection to VUDU.

Ye s Deactivate the connection to YouTube.

No Activate the connection to YouTube.

Ye s Deactivate the connection to Hulu Plus.

No Activate the connection to Hulu Plus.

43 English

Philips Wirelessconnect

You can enjoy your TV as a PC monitor wirelessly using your home

network. Make sure you download the Philips Wirelessconnect software

and install it on your PC before you perform the steps below.

Install Philips Wirelessconnect

1Display Setup using Home menu and use ▲▼ to select Software,

then press OK.

2Use ▲▼ to select Wirelessconnect code, then press OK.

• Write down the 12-digit code displayed on the screen. You will

need this to download Philips Wirelessconnect software.

3Start your internet browser on your PC and open the Philips

Wirelessconnect download page at

www.wifimediaconnect.philips.com/

On the website, you can check the necessary PC system

requirements.

4Enter the 12-digit code you wrote at step 2.

5Click the ‘Download now’ button to download the free Philips

Wirelessconnect software.

6Once downloaded, run the Philips Wirelessconnect software

installer. Follow the instructions on the screen to complete software

installation.

Using Philips Wirelessconnect

1Launch Philips Wirelessconnect on your PC first.

• Right on the and select "Start Projecting".

• The start up screen for Philips Wirelessconnect will be displayed

and the unit searches for an available PC that is running Philips

Wirelessconnect software.

Once connected, the Philips Wirelessconnect software will encode and

stream the screen of your PC as a video along with audio.

Depending on your computer and network configuration, there will be a

delay between your PC screen and the TV but the audio-video will

always be in sync.

Philips Wirelessconnect Help

To read the Philips Wirelessconnect Help, right click the program icon in

the notification tray of the PC and select Help.

Specifics

You can project high definition (HD) or standard definition (SD) video,

depending on the processing power of your PC. For smooth playback of

HD video, please use a hardware accelerated video player on your

computer. A hardware accelerated video player uses the graphics

adapter of your PC to render HD video rather than the processor. This

frees up the processor for Philips Wirelessconnect video encoding. The

content protection on most DVD or Blu-ray Disc movies might restrict

watching the movie on TV when the disc is playing on a PC. The TV

shows PC media files with a small delay. Philips Wirelessconnect is only

available for PC.

PC requirements

Windows XP, Windows Vista, Windows 7, Windows 8

Mac OS X 10.6 or above

Minimum PC requirements

•Intel

® Core™ 2 Duo 1.8GHz

• 512MB RAM

• IEEE 802.11n

Recommended PC requirements

•Intel

® Core™ 2 Duo 2.1GHz

•1GB RAM

View photos, play music and watch videos

using DLNA

On your TV you can play video, music and photo files stored on DLNA

certified home media servers connected to your home network. In

order to use this feature, you must connect this unit to the Internet.

It is recommended that files to be played back in this unit are

recorded under the following specifications:

<MP3>

• Sampling frequency: 32kHz or 44.1kHz or 48kHz

• Constant bit rate: 32kbps - 320kbps

<JPEG>

• Upper limit: 16Mpixel

<MPEG>

• Playable codec: MPEG1, MPEG2, MPEG4

• Maximum size of a video: 1920 x 1080

• Audio type: AC3, MPEG1 audio layer 3 (MP3),

MPEG1 audio layer 2, LPCM

Before using DLNA

Follow the procedure below before using DLNA.

1Connect this unit to the Internet.

Connecting the TV to the Internet using an Ethernet cable ➟ p.15

or Connecting the TV to the Internet using a wireless LAN ➟

p.16

• Broadband Internet connection of 8Mbps or faster is required.

Set up the necessary network connection settings.

Network

➟

p.37

Using DLNA

1Start DLNA home media servers in your home network.

• For details, refer to the instruction book of the DLNA certified

device.

2Press (MENU) on the remote control.

3Use ▲▼◄► to select Browse PC.

• This unit will start loading the home server list.

4After loading, home server list will appear. Select a home server you

want to access, then press OK.

Note

• If the "Start Projecting" is not available, please allow Wirelessconnect access through

your firewall software on the computer.

Note

• A maximum of 1,023 folders or files can be recognized.

• For the home server list, maximum of 16 servers can be displayed.

• The 10th and deeper hierarchies cannot be displayed.

• Unplayable files in the home server will not be displayed in the file list.

• For some files, playback is not available even if displayed in the file list.

• In order to play back the contents in home servers, the player and the servers must be

connected to the same access point.

• Compatibility and available playback function may differ depending on the home

server.

• Video files with unsupported audio format will be skipped.

• The quality of the playback picture or audio differs depending on your network

condition

44 English

Guide to DLNA

aHome server list

bFolder / media icon

cGroup (folder) / file list

dImage

eCurrent file info

View your pictures using DLNA

1Press ▲▼ to select a file or a folder.

2Press OK or ►F to start a Slide show of the files.

• Press OK or ►F to pause the Slide show.

The F icon appears.

• Press E or D to move between images.

• Press BACK or C to stop the Slide show.

• Press OPTIONS to display the optional menu, then use ▲▼

to select the desired item.

*1 You can set Slide time and Tr a n s i t i o n s when images are in Slide show.

*2 You can set Rotate and Zoom when Slide show is in pause mode.

Listen to music using DLNA

1Press ▲▼ to select a file or a folder.

2Press OK or ►F to play the selected files.

• Press OK or ►F to pause, press OK or ►F again to resume.

• Press D to skip up the next file.

• Press E to skip down the previous file.

• Press C to stop playback.

• Press OPTIONS to display the optional menu, then use ▲▼

to select the desired item.

Watch videos using DLNA

1Press ▲▼ to select a file or a folder.

2Press OK or ►F to play the selected files.

• Press OK or ►F to pause, press OK or ►F again to resume.

• Press D to fast-forward search.

• Press E to fast-backward search.

• Press C to stop playback.

Press ►F to resume from the point at which playback was

stopped. Press OK to play from the beginning of the file at which

playback was stopped.

• Press CH + to play the next file.

• Press CH − to play the current file at the beginning.

Press CH − twice within 5 seconds to play the previous file.

• Press OPTIONS to display the optional menu, then use ▲▼

to select the desired item.

Slide time*1

Short Switches to the next image in 5 seconds.

Medium Switches to the next image in 10 seconds.

Long Switches to the next image in 15 seconds.

Tr a n s i t i o n s*1

None No effect when switching images.

Dissolve Overlaps a next image on a current image.

Wipe right Pushes a current image out from left.

Wipe left Pushes a current image out from right.

Wipe up Pushes a current image out from bottom.

Wipe down Pushes a current image out from top.

Box in A next image comes into the center from out.

Box out A next image goes to the out from center.

Rotate*2

0Displays an image at its original direction.

90 Rotates an image clockwise by 90 degrees.

180 Rotates an image clockwise 180 degrees.

270 Rotates an image clockwise 270 degrees.

Zoom*2

1X Displays an image at its original size.

2X Magnifies a current image as twice.

4X Magnifies a current image as fourfold.

Server 1 Audio

Server 2 Photos

Server 3 Video

Folder

Highway Blues Title:

Album:

Duration: 00:05:28

Video10

Blue hills

Year:

Repeat

Off Sets repeat playback to off.

On Sets repeat playback for all MP3 files in the

current folder.

Shuffle

Off Sets shuffle playback to off.

On Sets shuffle playback for all MP3 files in the

current folder.

TV speakers

Off The sound will not be output from the unit's

speakers.

On The sound will be output from the unit's

speakers.

Speakers

EasyLink

You can control audio output from your

connected EasyLink Compliant Devices with

VOL + / − by using this unit's remote control.

Note

•Master EasyLink must be activated in the Preferences menu to make the TV speakers

menu available when you select On or Speakers EasyLink.

TV Speakers

Off The sound will not be output from the unit's

speakers.

On The sound will be output from the unit's

speakers.

Speakers

EasyLink

You can control audio output from your

connected EasyLink Compliant Devices with

VOL + / − by using this unit's remote control.

Note

• The resume information will be kept even when the unit is Turned Off.

• If you play another file while the previously viewed file is being resumed, the resume

information of the previously viewed file will be deleted.

45 English

Net TV

Net TV offers Internet services for your TV. Use the TV remote control

to browse the Net TV pages. You can play movies, listen to music and

much more, all from your TV screen.

– Because Net TV is an online system, it can be modified over time to

better serve its purpose.

– Some Net TV services can be added, changed or stopped after

some time.

– You cannot download and save files or install plug-ins.

Before Logging in to Net TV

Follow the procedure below before logging in to Net TV.

1Connect this unit to the internet.

2Set up the necessary network connection settings.

Network

➟

p.37

Logging in to Net TV

1Press NET TV.

• Net TV screen will appear, then use ▲▼◄► to select service

icon.

• For the first time only, Philips Terms of Use Internet Enabled

product screen will appear. After confirming the content, use

◄► to select Agree, then press OK.

Guide to Net TV screen

aNet service icons (fixed): Displays default service icons.

bMy Apps list: Displays Net service icons you have

listed in App Gallery.

cCountry: Selects what country you live.

dTerms of use: Displays a clause of Net service.

eApp Gallery: Displays currently available Net

service icons in your country.

fPage guide: Displays the order of pages. The

current page will be highlighted.

gAPP1 / APP2 / APP3 / APP4: Displays Net service icons you have

registered in App Gallery for APP1

/ APP2 / APP3 / APP4.

• Press Apps buttons (red / green /

yellow / blue) to start up APP1 /

APP2 / APP3 / APP4 accordingly.

My Apps functions

Remove App

1Use ▲▼◄► to select the desired App, then press OPTIONS.

2Use ▲▼ to select Remove App, then press OK.

• The selected App will be removed from My Apps list.

Move App

1Use ▲▼◄► to select the desired App, then press OPTIONS.

2Use ▲▼ to select Move App, then press OK.

• The selected App icon will be smaller.

3Use ▲▼◄► to the point you want to place, then press OK.

Guide to App Gallery

aCategory menu: List of category menu.

bIcon list: Displays unregistered Net service icons on My

Apps list.

cPage guide: Displays the order of pages. The current page

will be highlighted.

1Press NET TV, then use ▲▼◄► to select App Gallery.

2Use ▲▼◄► to select the desired App in My Apps list, then press

OK.

• You can also choose from Category menu. Use ▲▼◄► to

select All, then use ▲▼ OK to select the desired category.

•If you select Add, the selected App icon will be placed at the end

of My Apps list.

•If you select Add and move, the selected App icon will be smaller

and use ▲▼◄► to the point you want to place, then press

OK.

Even if you press BACK to cancel this function, the selected App

icon will be placed at the end of My Apps list.

Information on Network Services

For detailed information on 3rd party Internet services, please visit the

service providers website:

Netflix: http://www.netflix.com/HowItWorks

Film Fresh*: http://filmfresh.roxionow.com/

VUDU: http://www.vudu.com/product_overview.html

Cloud TV: http://www.activevideo.com

Hulu Plus: http://www.hulu.com

CinemaNow*:http://www.cinemanow.com

* Film Fresh / CinemaNow is supported in 50PFL3908, 46PFL3908,

40PFL4908, 39PFL2908, 32PFL4908, 29PFL4908 only.

APP1

My Apps

APP2 APP3 APP4

: USA

App Gallery

XXXXX XXXXX

XXXXX

All

46 English

Enjoying vTuner

With this unit, you can enjoy video and Internet radio with vTuner via

the Internet. In order to watching video and listen to Internet radio, you

must connect this unit to the Internet.

Video playback

After you set up the network connection, follow the procedure below

to watch the video.

Guide to the player screen

e.g.) Recommendations

aCategory: List of category menus

Recommendations: List of recommendation stations

Favorites: List of your favorite video stations

Genre: List of stations categorized by genre

Most Popular Podcasts: List of popular podcasts

bStation list: Displays station list.

cOperation guide: Displays Apps buttons

(red / green / yellow / blue) guide.

1Press NET TV on the remote control and then use ▲▼◄► to

select vTuner Video.

2Use ◄► to select the desired category, then press OK.

3In the player screen, use ▲▼◄► to select the desired station or

genre, then press OK.

Guide to the playback screen

aStation icon

bStation name

cStation information

dEpisode list

eApps buttons (red / green / yellow / blue) guide

fCurrent episode information

4In the playback screen, use ▲▼ to select the desired episode, then

press OK.

• After loading, playback of the selected episode will start.

• To stop playback, press C.

• Episode list can be displayed 5 episodes at one time. To show the

previous / next episodes, press Apps buttons (red / green).

• To enlarge playback screen, press Apps button (blue).

Add to Favorites

You can add your favorite stations to Favorites in the category tab. To

add your favorite stations, follow the procedure below.

1Follow steps 1 to 2 in Video playback.➟ p.46

2Use ▲▼◄► to select the station you want to add to Favorites,

then press Apps button (yellow).

• The selected station is added to the station list in Favorites.

• Confirmation message will appear.

• Press Apps button (yellow) to add your favorite station in

Favorites while the desired episode is selected in the episode list

or the episode is being played back.

3Press OK.

Remove from Favorites

1Follow step 1 in Video playback.➟ p.46

2Use ◄► to select Favorites in the category tab, then press OK.

3Use ▲▼◄► to select the station you want to remove from

Favorites, then press Apps button (yellow).

• Confirmation message will appear.

4Use ◄► to select Ye s , then press OK.

• The selected station is removed from Favorites.

2/3

NewsNews

FavoriteNextPrevious

Recommendations Favo Genr Most

FavoriteNextPrevious

NEWS NEWS (11.25.10)

NEWS NEWS (11.24.10)

NEWS NEWS (11.23.10)

NEWS NEWS (11.22.10)

NEWS NEWS (11.21.10)

Date : Nov /25/ 2010

Duration : 00:19:24

NEWS NEWS (Video)

The latest news

Reco Favo Genre Most

Note

• Video service may not be fully available with narrowband Internet connection. (e.g.

56k modem) When watching video, use broadband Internet connection. (For details,

contact your Internet service provider.)

• Depending on the bit rate of a station or the network environment, it may take a

while to complete loading the station or playback may not be available.

• The streaming video may be interrupted during playback, when the vTuner server is

busy.

• Some stations cannot be displayed in the list, depending on the network environment.

• If the loading time of a station exceeds 3 minutes, the loading will be canceled.

• The order of station / episode in the list depends on the information from vTuner

server and may change without notice.

47 English

Internet radio playback

After you set up the network connection, follow the procedure below

to listen to Internet radio.

Guide to the playback screen

e.g.) Location

aCurrent hierarchy (total number of items)

bCurrent station information

(Information will be changed when INFO is pressed)

cApps buttons (red / green / yellow / blue) guide

dStation list

ePlayback status

fStation icon

1Press NET TV on the remote control and then use ▲▼◄► to

select vTuner Radio.

• Category list will appear.

2In the category list, use ▲▼ to select the desired category, then

press OK.

• Station / folder list of selected category will appear.

•For Location and Genre, use ▲▼ to select the desired location

or genre after selecting the category, then press OK.

3In the station / folder list, use ▲▼ to select the desired station,

then press OK.

• After loading, playback of the selected station will start.

• If you select a folder, use ▲▼ to select the desired station in the

next hierarchy, then press OK.

• To stop playback, press C.

• To go back to the previous or next hierarchy, press ◄►.

Add to favorite list

You can add your favorite stations to Favorites in the category list. To

add your favorite stations, follow the procedure below.

1Follow steps 1 to 3 in Internet radio playback.➟ p.47

2Use ▲▼ to select the station you want to add to Favorites, then

press Apps button (yellow).

• The selected station is added to Favorites folder.

• Confirmation message will appear.

• If you select a folder, use ▲▼ to select the desired station in the

next hierarchy, then press Apps button (yellow).

3Press OK.

Remove from favorite list

1Follow step 1 in Internet radio playback.➟ p.47

2Use ▲▼ to select Favorites, then press OK.

3Use ▲▼ to select the station you want to remove from Favorites,

then press Apps button (yellow).

• Confirmation message will appear.

4Use ◄► to select Ye s , then press OK.

• The selected station is removed from Favorites folder.

Add stations on the vTuner website

You can add stations which are not in the vTuner station list.

1Follow step 1 in Internet radio playback.➟ p.47

2Use ▲▼ to select Get access code, then press OK.

• The latest vTuner website address and access code for this unit

will be displayed. Please take a note of the access code. (This

access code will be required when creating a vTuner account.)

3On your PC, visit the website and create your vTuner account.

• Follow the instructions given on the PC screen.

4Add stations by following the instructions given on the PC screen.

• The stations will be added to My Added Stations.

Recently Played List of stations which are recently played

Favorites List of your favorite radio stations

My Added Stations

List of stations which are added on vTuner

website (This category will appear only

after you add stations on vTuner website. )

Location List of stations categorized by location

Genre List of stations categorized by genre

New Stations List of the latest stations which are recently

added automatically.

Most Popular Stations List of the most frequently accessed

stations by the all listeners.

Jazz(3)

FM 76.2 FM

Jazz jAzz jaZz jazZ

Schonan Beach FM 78.9

Favorite

Genre :Jazz

Location :Japan

Language :Japanese

Note

• This unit cannot play back stations with audio format other than MP3 and WMA.

• Internet radio service may not be fully available with narrowband Internet connection.

(e.g. 56k modem) When listening to Internet radio, use broadband Internet

connection. (For details, contact your Internet service provider.)

• Depending on the bit rate of a station or the network environment, it may take a

while to complete loading the station or playback may not be available.

• The streaming audio may be interrupted during playback, when the vTuner server is

busy.

• Some stations cannot be displayed in the list, depending on the network environment.

• If the loading time of a station exceeds 3 minutes, the loading will be canceled.

• The order of station / folder in the list depends on the information from vTuner server

and may change without notice.

Note

• You can also add your favorite stations to Favorites on your PC. To add your favorite

stations on your PC, visit http://go2service.vtuner.com/pe/ and create a vTuner account

with the access code, which you can check from the category list. Internet radio

playback.➟ p.47

• You can change folder names or order of lists in your vTuner page on the Internet.

•My_Favorite folder will appear after you add a station to Favorites on this unit. (Your

favorite station will also be added to My_Favorite folder.)

48 English

Reset the station list

You can remove all stations / folders in Recently Played, Favorites and

My Added Stations.

1Follow step 1 in Internet radio playback.➟ p.47

2Use ▲▼ to select Reset, then press OK.

3Use ◄► to select Ye s , then press OK.

• All stations / folders in Recently Played, Favorites and My Added

Stations are removed.

Pandora® operations

With this unit, you can instantly listen to personalized radio stations

streamed over the Internet from Pandora.

To learn more about Pandora, please visit www.pandora.com

Activating Pandora

In order to listen to Internet radio streamed from Pandora via the

Internet, you must create a Pandora account and activate this unit.

1Press NET TV, then use ▲▼◄► to select PANDORA.

2Use ▲▼ to select Create new account, then press OK.

3Use ▲▼ to select No, I am new to Pandora., then press OK.

4Note the activation code and website address displayed on the TV

screen.

5On your PC, visit the website address noted at step 4.

6Follow directions on the website to create your account.

7On this unit, select Continue and press OK to complete activation.

Adding Pandora User Accounts

You can add multiple Pandora user accounts on this unit.

1Follow steps 1 to 2 in Activating Pandora.➟ p.48

2Use ▲▼ to select Yes, I have a Pandora account, then press OK.

3Enter your e-mail address, then press OK while OK is selected.

4Enter a password, then press OK while OK is selected.

5Use ▲▼ to select Sign In, then press OK.

• Your account is added to the user list and player screen appears

on the TV screen.

Creating a New Station

By entering your favorite artists or tracks, Pandora selects music and

creates a new station for you on the basis of the entered information.

1On the player screen, press Apps button (yellow) to call up the

To o l M e n u .

2Use ▲▼ to select Create a new station,, then press OK.

3Enter a name of your favorite artist or tracks, then press OK while

OK is selected.

• Search result will appear on the right side of the TV screen.

• If the selection screen of result type appears, use ▲▼ to select

the desired type, then press OK.

4Use ▲▼ to select the desired station, then press OK to start the

playback.

Guide to the Player Screen

On the player screen, you can set various options to the currently

playing track.

Note

• Pandora is available only in the United States.

• You can add up to 5 accounts. After creating 5 accounts, Create new account will not

be displayed.

►FResumes the playback / pause the playback.

CStops the playback and the station list will appear.

DSkips to the next track.

Note

•On the To o l M e n u , you can delete or rename the currently selected station.

aArtist name : Displays artist name.

bAlbum name : Displays album name.

c: Give thumbs up to the currently playing track.

Pandora will play tracks similar to the track.

d: Give thumbs down to the currently playing track.

Pandora will skip and will not play the track.

e: Bookmarks the currently playing track.

You can view your bookmarked tracks list by

accessing Pandora website and log into your

account.

f: Tells Pandora that you do not like the currently

playing track. Pandora will not play the track for

about a month.

gOperation guide :Displays Apps buttons

(red / green / yellow / blue) guide.

: XXXXX

ABC

American Oldies Radio

4:52 0:00

Exit Why this track? Tool Menu Station List

cbadef

49 English

6Useful tips

FAQ

Question Answer

My remote control does not

work.

What should I do?

• Check the antenna or cable connection to the main unit.

• Check the batteries of the remote control.

• Check if there is an obstacle between the infrared sensor window and the remote control.

• Test the signal Output use IR Signal Check. ➟ p.52

If okay, then possible infrared sensor trouble.

• Aim the remote control directly at the infrared sensor window on the front of the unit.

• Reduce the distance to the unit.

• Re-insert the batteries with their polarities (+/–) as indicated.

• When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal of this unit. Move the

infrared-equipped device away from this unit, change the angle of the infrared sensor or Turn Off the infrared communication

function.

How come the Initial setup

appears every time I Turn On

this unit?

• Make sure to complete the initial setup before the unit goes into Standby mode.

Why can I not watch some RF

signal TV programs.

• Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable

channels are broadcast.

•Make sure Autoprogram has been completed. ➟ p.34

• The selected channel may not be broadcasting.

• When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the

Autoprogram. ➟ p.34

• The selected channel cannot be viewed by the Child and ratings lock setting. ➟ p.31

• The unit requires some kind of antenna Input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital or VHF / UHF)

or an RF coaxial cable from your wall Cable / Satellite set-top box needs to be plugged into the unit.

How come there is no image

from the connected external

devices?

• Check if the correct Input mode is selected by pressing SOURCE. Watching channels from an external device. ➟ p.21

• Check the antenna, cable or other Input connection to the unit.

• When using the Component Video connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected

to their corresponding colored jacks on the unit.

When I enter a channel number,

it changes automatically.

• Many Digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying the

broadcasting station channel number. These basic numbers used for previous Analog broadcasts. (e.g., Input ch# 30 automatically

changes to ch# 6.1)

Why are captions not displayed

entirely? Or, captions are

delayed behind the dialog.

• Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning production

companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective editing is used to insure

that the captions remain up-to date with the current TV screen dialog.

How can I set the clock? • There is no clock function on this unit.

I cannot change the Child lock

setting because my PIN code no

longer works.

• lthough the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN code in Child and

ratings lock. ➟ p.31 When you forget your PIN code, enter 0711 in Change PIN to reset the PIN code. ➟ p.33

How come the “Software

update failed.” message appears

when I Turn On this unit?

• The unit will not work correctly unless the software upgrade is completed. Try Recovery update. ➟ p.41

50 English

Troubleshooting

If the unit does not perform properly when operated as instructed in this User Manual,

check the following Troubleshooting tips and all connections once before calling for service.

Power

No power

• Make sure the AC power cord is plugged in.

• Make sure that the AC outlet supplies the proper voltage, plug another

electrical appliance into the AC outlet to ensure that the AC outlet

operates normally.

• If a power failure occurs, unplug the AC power cord for 1 minute to allow

the unit to reset itself.

Remote

Control buttons do not work.

• Press only one button at a time. Do NOT press more than one button at

the same time.

• Ensure that no buttons on the remote control are depressed and move

freely.

Universal remote control does not work properly.

• Refer to the user manual of the universal remote control for the Philips

code.

Picture

Power is ON but no screen image.

• Check whether the connection of the antenna, cable receiver or satellite

box is connected correctly.

• Check whether all the cables to the unit are connected to the correct

Output jack of your device like Blu-ray / DVD recorder.

• Make sure that the selected Input mode is connected to the working Input

jack.

• Check if your computer is NOT in sleep mode when the Input mode of this

unit is in PC mode. Tap any key on the keyboard to wake up your computer.

• Check if the correct input mode is selected by pressing SOURCE.

No color

• View other TV channels. The problem might be limited to the broadcasting

station or weak signal strength.

•Adjust Color in Picture settings. ➟ p.27

Picture poor, sound OK

• Electrical interference from nearby appliances may affect picture quality

when viewing an off-the-air low power NTSC analog broadcast signal.

•Adjust Contrast and Brightness in Picture settings. ➟ p.27

• View other TV channels. The problem might be limited to the broadcasting

station or weak signal strength.

• For the best picture quality, watch “High Definition” wide screen programs. If

the HD content is not available, watch “Standard Definition” programs instead.

You see noise or trash on the screen.

• When the capabilities of the unit exceed the capabilities of the Digital

broadcasting, the signal will be increased to match the capabilities of the

display of the unit. This may cause noise or trash.

When viewing an off-the-air low power NTSC Analog broadcast signal may

show noise or trash on the screen.

Unusual picture appears and the TV does not operate.

• Press the power button first. If it does not solve, follow the procedure

below.

1 Press the buttons on the remote control in the order shown below.

► ▲ ▼

2 Unplug the AC power cord once, and wait for 1 minute, and then plug it

in again.

Picture & Sound

No picture or sound

• Check if the Power is on.

• Check whether all the cables to the unit are connected to the correct

Output jack of your device like Blu-ray / DVD recorder.

• View other TV channels. The problem might be limited to the broadcasting

station or weak signal strength.

• Unplug the AC power cord and wait for about 1 minute, then plug the AC

power cord and Turn On the unit again.

• Check whether the connection of the Antenna or Cable / Satellite set-top

box is connected correctly.

• Make sure that the selected Input mode is connected to the working Input

jack.

• Check if your computer is NOT in sleep mode when the Input mode of this

unit is in PC mode. Tap any key on the keyboard to wake up your computer.

• Make sure that the sound is not muted. Press (MUTE) so that the

volume bar and current volume level will appear on the TV screen.

• Make sure that the volume is NOT set to 0 or . If so, use VOL + / − to

adjust to the desired volume.

• Make sure that the headphone is NOT connected to the Headphone Audio

Output jack.

• Make sure that the TV speakers is NOT set to Off.

Adjusted Picture or Sound settings are not effective every time the unit is

turned On.

• You must set to Home in Location. ➟ p.35

Otherwise, the settings you adjusted will not be memorized after the unit

goes into Standby mode.

You see a distorted picture or hear an unusual sound.

• You may be getting NTSC TV signal (not HDTV signal) interference from

electrical appliances, automobiles, motorcycles or fluorescent lights.

• Try moving the unit to another location to see if this is the cause of the

problem.

Ghosts, lines or streaks in picture.

• Electrical interference from nearby appliances may affect picture quality

when viewing an off-the-air low power NTSC analog broadcast signal.

• View other TV channels. The problem might be limited to the broadcasting

station or weak signal strength.

Sound

No sound, distorted sound or incorrect Audio Sound is heard when using the

HDMI-DVI connections.

• Make sure that the Analog Audio signals from the HDMI-DVI device are

connected to the Analog Audio Input L/R jacks.

• When using Component Analog Video, Composite Analog Video or PC

VGA Video make sure that the Analog Audio (L/R) connectors are

mounted into the Audio (L/R) Input jacks.

Sound poor, picture OK

• View other TV channels. The problem might be limited to the broadcasting

station or weak signal strength.

• Check if the audio cable is connected incorrectly.

You switch to a different Input and the volume changes.

• This unit will memorize the volume level from the last time you adjusted it.

• If the volume of the sound from another device is higher or lower, then the

loudness will change.

•Make sure Auto volume leveling is set to On. ➟ p.29

Child and Rating Lock

Forgotten PIN code.

• Enter “0711” to clear your password.

Screen

You switch to a different Input and the screen size changes.

• This unit will memorize the viewing mode from the last time you used the

particular input modes.

The display image does not cover the entire screen.

• If you are using the unit as a PC monitor, make sure that Horizontal

position and Ver ti c a l p ositio n in Picture are set correctly. ➟ p.27

• If you are watching TV or using the Composite Video, Component Video or

HDMI with 480i Input, press FORMAT repeatedly to switch various

screen modes.

Different color marks on the TV screen.

• View other TV channels. The problem might be limited to the broadcasting

station, missing data or pixelation.

Captions

Captions are displayed as a white box. No caption is displayed in the closed

caption-supported program.

• Interference from buildings or weather conditions may cause captioning to

be incomplete if watching Analog TV (NTSC) signals.

• Broadcasting station may shorten the program to insert advertisements.

The closed caption decoder cannot read the information of the shortened

program.

• Captions that are delayed a few seconds behind the actual dialog are common

for live broadcasts.

Most captioning production companies can display a dialog to maximum of 220

words per minute. If a dialog exceeds that rate, selective editing is used to insure

that the captions remain up-to date with the current TV screen dialog.

Black box is displayed on the TV screen.

• The text mode is selected for caption. Select CC-1, CC-2, CC-3, or CC-4.

51 English

Software update

“Software update failed.” message appears when the unit is turned On.

• The unit will not work correctly unless the software upgrade is completed.

Tr y Recovery update. ➟ p.41

Network

Cannot connect to the network.

• Check if the Ethernet cable connection is properly made. Turn On the

modem or broadband router.

• Check the network settings.

• Check if the broadband router and/or modem is correctly connected.

Sometimes video quality is poor when using the wireless LAN.

• The wireless network connection quality varies depending on the distance

or obstacles (e.g. wall, basement, 2nd floor) between the TV Wireless LAN

Adapter and the wireless router (access point), from other wireless

networks, and brand and type of the wireless router (access point). When

using the Wireless LAN of the TV, it is suggested to place the wireless

router as close as possible to the Television.

Wireless LAN connection fails or wireless connection is poor.

• Check the installation location of the TV and wireless router (access point).

Signal quality may be affected for the following reasons.

- Interference of other wireless devices, microwaves, fluorescent lights, etc.,

are placed nearby.

- There are floors or walls between the wireless router and TV.

- If the problems continue even after checking the above, try making a

wired LAN connection.

Cannot use the wireless connection.

• Check if the Wireless LAN Access Point (AP) (e.g. wireless router) is

oriented properly or not placed too close between them.

• Once you have activated the wireless connection please wait 30 seconds for

the connection to be established after Turning On the unit, before trying to

access network features such as Net TV.

Cannot use Netflix feature.

• Netflix is available only in the United States and Canada.

• Check if the network connection is properly made.

• Visit http://www.netflix.com/HowItWorks on your PC and become a Netflix

member.

Cannot use Hulu Plus feature.

• Hulu Plus is available only in the United States.

• Check if the network connection is properly made.

Cannot add movies or TV episodes to the Instant Queue.

• Visit www.netflix.com on your PC.

Even though the speed of the Internet connection improves during playback,

the picture quality of Netflix streaming movie does not improve.

• The picture quality does not change during playback. It differs depending on

the speed of Internet connection at the time of loading.

Cannot use VUDU feature.

• VUDU is available only in the United States, Canada and Mexico.

• Check if the network connection is properly made.

Cannot rent or buy movies / TV episodes on VUDU.

• You need to activate the VUDU account. For detailed information, please

visit the service providers website at

http://www.vudu.com/product_overview.html

• Log into your account at http://my.vudu.com and check your payment

information.

The picture quality of streaming movie (Netflix, Hulu Plus, Film Fresh or

VUDU) is poor.

• Check the speed of your Internet connection. You need speeds of at least 8

Mbps to this player for high quality uninterrupted playback.

Streaming movie (Netflix, Hulu Plus, Film Fresh or VUDU) often stops or starts

buffering during playback.

• Contact your Internet service provider to troubleshoot your Internet

connection for speed and line quality. Consistent line quality and speed are

very important for Internet video playback.

Cannot connect to the network while my PC is connected to the network.

• Check the content of your Internet service contract to see if your Internet

Service Provider prevents multiple terminals connecting at the same time.

Cannot use Easy connect (WPS) to connect to the Access Point.

• Connect the unit to the Access Point using Scan or Manual entry mode. If

the Access Point’s security mode is set to WEP*, change the setting to WPA

or WPA2 (recommended), then try Easy connect (WPS) again. (For Access

Point configuration, please consult its user manual or manufacturer.)

* WEP is not recommended to be used due to its Major security flaws.

Change the Security protocol on the wireless router to WPA or WPA2

(recommended) mode.

Folder or files stored on DLNA home media server are not displayed in the file

list or cannot be played back.

• Check the setting on your home media server. (Refer to the user manual of

the home media server.)

• Check the network connection and settings.

Cannot use Film Fresh feature.

• Film Fresh is available only in the United States.

• Check if the network connection is properly made.

• Visit http://filmfresh.roxionow.com/ (Film Fresh) on your PC and create an

account.

Cannot use Pandora feature.

• Check if the network connection is properly made.

• Pandora is available only in the United States.

• You must create a Pandora account and activate this unit. Activating

Pandora ➟ p.48

The audio of Internet radio station interrupted.

• vTuner server, station or the Internet connection is busy. The bit rate of the

station is high.

Cannot play back Internet radio.

• Check if the network connection is properly made.

• Check the firewall setting of the modem or router.

• For some stations, playback is not available on this unit.

The quality of the Internet radio audio is poor or noise occurs during playback

of Internet station.

• The bit rate of the station is low.

Cannot get into the PC's screen even the Philips Wirelessconnect is launched.

• Make sure if the network connection is connected properly.

• Check if your PC runs Philips Wirelessconnect.

• Make sure your TV and PC are connected on the same network.

I have a 1.8GHz CPU but Wirelessconnect does not work on my PC.

• For smooth operation of your PC while Philips Wirelessconnect is running

you need a mainstream dual core processor from Intel® or AMD.

Intel® : Core™2 Duo or Core™ i3/5/7 @ 1.8GHz or higher.

AMD :

Athlon™ II X2, Turion™ II Dual-Core or Phenom™ X2 @ 2GHz or higher

Note

• The LCD screen is manufactured to provide many years of useful life. Occasionally a

few non active pixels may appear as a fixed point of blue, green or red.

This is not to be considered a defect in the LCD screen.

• Some functions are not available in specific modes, but this is not a malfunction. Read

the description in this User Manual for more details on correct operations.

52 English

7Information

Glossary

Analog TV (NTSC)

Acronym that stands for National Television Systems Committee and the name of

Analog broadcasting standards.

Off the air NTSC signals are no longer being sent by major broadcasting stations

in the USA.

ARC (Audio Return Channel) (HDMI 1 only)

HDMI-ARC allows you to use Philips EasyLink to output TV audio directly to a

connected Audio device, without the need for an additional Digital Audio cable.

Be sure that the device is HDMI CEC and ARC compliant, and that the TV is

connected to the device using an HDMI cable attached to both HDMI-ARC

connectors.

Aspect ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other

words, the TV screen is almost square); widescreen models are 16:9 (the TV

screen is almost twice as wide as its height).

CEC (Consumer Electronics Control)

This allows you to operate the linked functions between our brand devices with

CEC feature and this unit. We do not guarantee 100% interoperability with other

brands of CEC compliant devices.

Component Video

This is a video signal format that conveys each of 3 principal colors of light (red,

blue and green) through different signal lines. This allows the viewers to

experience picture colors as original as it is. There are several signal formats,

including Y / Pb / Pr and Y / Cb / Cr.

Dolby Digital

The system developed by Dolby Laboratories to compress Digital sound. It offers

stereo sound (2ch) or multi-channel audio.

DTV (ATSC)

Initialism that stands for Advanced Television Systems Committee and the name

of the Digital broadcasting standards.

E-sticker

E-sticker is showing set features, technical information, etc on this TV set that is

displayed on the TV screen mainly used by TV retailers. Previously the

information was on a printed sticker that was put on the display.

HDMI (High-Definition Multimedia Interface)

Interface that supports all uncompressed, Digital Audio / Video formats including

set-top box, Blu-ray / DVD recorder or Digital television, over a single cable.

HDTV (High Definition TV)

Ultimate Digital format that produces high resolution and high picture quality.

PIN code

A stored 4-digit number that allows access to parental control features.

SAP (Secondary Audio Program)

Second-audio channel delivered separately from main-audio channel. This audio

channel is used as an alternate in bilingual broadcasting.

SDTV (Standard Definition TV)

Standard Digital format that is similar to the Analog TV (NTSC) picture quality.

SRS TruSurround HD™

Creates an immersive, feature-rich surround sound experience from two

speakers, complete with rich bass, high frequency detail and clear dialog.

Maintenance

• Wipe the front panel and other exterior surfaces of the unit with a

soft cloth.

• Never use a solvent or alcohol. Do not spray insecticide liquid near

the unit. Such chemicals may cause damage and discoloration to the

exposed surfaces.

Wipe the panel of the unit with a soft cloth. Before cleaning the panel,

disconnect the AC power cord.

Should your unit become inoperative, do not try to correct the problem

yourself. There are no user serviceable parts inside. Call our toll free

customer support line found on the cover of this User Manual to locate

an authorized service center.

If the remote control is not working properly, you can use a Digital

camera (including a cellular phone with built-in camera) to see if it is

sending out an infrared signal.

With a Digital camera

(including built-in cell phone cameras):

Point the Digital Camera towards the remote control

infrared diode at the front of the remote control.

Press any button on the remote control and look

through the camera display. If the infrared pulsating

light appears through the camera, the remote control

is sending out an IR signal.

Cabinet Cleaning

Panel Cleaning

Servicing

IR Signal Check

53 English

8 Specifications

• Specifications are subject to change without prior notice.

Model # 50PFL3908 46PFL3908 /

46PFL3608 40PFL4908 39PFL2908 /

39PFL2608 32PFL4908 29PFL4908

Picture

Ty p e

FHD (1920 x 1080 pixels 60Hz) WXGA (1366 x 768 pixels 60Hz)

Diagonal screen size / Aspect ratio 49.5"/ 16:9 46.0"/ 16:9 40.0"/ 16:9 38.6"/ 16:9 31.5"/ 16:9 28.5"/ 16:9

Viewing angles 176° (V) by

176° (H)

178° (V) by

178° (H) 176° (V) by 176° (H) 178° (V) by

178° (H)

176° (V) by

176° (H)

Built-in Digital / Analog tuner ATSC (Digital) / NTSC (Analog)

Sound

Mono / Stereo Mono, Stereo, SRS TruSurround HD™

Power Output (RMS watts) 10 W x 2 8 W x 2

Equalizer 5 band

Ease of use

Picture format

SD (4:3 Source) Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen

HD (16:9 Source) Automatic / 4:3 / Wide screen / Unscaled Automatic / 4:3 / Wide screen / Full

HDMI AV (4:3 Source) Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen

HDMI AV (16:9 Source) Automatic / 4:3 / Wide screen / Unscaled Automatic / 4:3 / Wide screen / Full

PC Source 4:3 / Wide screen / Unscaled (Refer to HDMI AV (16:9 Source) above if PC has HDMI Output.)

Photo Slide show JPEG files only

MP3 playback MP3 files only

Video playback MPEG1 (.mpg / .mpeg), MPEG2 (.mpg / .mpeg / .vob), H.264 (.mp4),

MPEG4 SP/ASP (.avi), MPEG4 (.mp4)

Channel

Channel coverage

Terrestrial DTV (ATSC): VHF: 2~13

UHF: 14~69 (each channel has e.g. 2.1~2.9, 3.1~3.9, etc)

Terrestrial Analog (NTSC) : VHF: 2~13

UHF: 14~69

CATV (Analog NTSC) 2~13, A~W

W+1~W+94 (analog W+1~W+84), A-5~A-1, 5A

Tuning system Channel frequency synthesized tuning system

Channel access Direct access number keyboard, Programmable scan, and Channel up / down

Connectivity

Component Video Input (Y/Pb/Pr) 1

supporting video signals : 480i/p, 720p, 1080i 60Hz

Composite Video Input

(shared Y green terminal with Component Video) 1

HDMI Input

supporting video signals : 480i/p, 720p, 1080i/p, 24Hz-60Hz

HDMI ARC (HDMI 1 only)

PC-Input signal up to FHD (1920 x 1080) PC-Input signal up to WXGA

(1360 x 768)

Audio L/R Input 1

PC Input via VGA and HDMI

USB 1

Wireless LAN Supporting wireless standards : IEEE 802.11 b/g/n (2.4GHz)

Ethernet port 1

Digital Audio Output 1

supporting Dolby Digital

Headphone Output 1

1/8 inch (3.5mm)

Power

Power requirements 120V~ AC +/− 10%, 60Hz +/− 0.5%

Te m p e r a t u r e

Operating temperature 41 °F (5 °C) to 104 °F (40 °C)

54 English

9 Warranty

PHILIPS LIMITED WARRANTY

ONE (1) YEAR

WARRANTY COVERAGE:

PHILIPS warranty obligation is limited to the terms set forth

below.

WHO IS COVERED:

Philips warrants the product to the original purchaser or the per-

son receiving the product as a gift against defects in materials and

workmanship as based on the date of original purchase

(“Warranty Period”) from an Authorized Dealer. The original

sales receipt showing the product name and the purchase date

from an authorized retailer is considered such proof.

WHAT IS COVERED:

The Philips warranty covers new products if a defect in material

or workmanship occurs and a valid claim is received by Philips

within the Warranty Period. At its option, Philips will either (1)

repair the product at no charge, using new or refurbished

replacement parts, or (2) exchange the product with a product

that is new or which has been manufactured from new, or ser-

viceable used parts and is at least functionally equivalent or most

comparable to the original product in Philips current inventory,

or (3) refund the original purchase price of the product.

Philips warrants replacement products or parts provided under

this warranty against defects in materials and workmanship from

the date of the replacement or repair for ninety (90) days or for

the remaining portion of the original product’s warranty,

whichever provides longer coverage for you. When a product or

part is exchanged, any replacement item becomes your property

and the replaced item becomes Philips’ property. When a refund

is given, your product becomes Philips’ property.

Note: Any product sold and identified as refurbished or

renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty

requirements are met. Failure to follow all requirements

can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND

LIMITATIONS:

This Limited Warranty applies only to the new products manu-

factured by or for Philips that can be identified by the trademark,

trade name, or logo affixed to it. This Limited Warranty does not

apply to any non-Philips hardware product or any software, even

if packaged or sold with the product. Non-Philips manufacturers,

suppliers, or publishers may provide a separate warranty for their

own products packaged with the bundled product.

Philips is not liable for any damage to or loss of any programs,

data, or other information stored on any media contained within

the product, or any non-Philips product or part not covered by

this warranty. Recovery or reinstallation of programs, data or

other information is not covered under this Limited Warranty.

This warranty does not apply (a) to damage caused by accident,

abuse, misuse, neglect, misapplication, or non-Philips product, (b)

to damage caused by service performed by anyone other than

Philips or Philips Authorized Service Location, (c) to a product or

a part that has been modified without the written permission of

Philips, or (d) if any Philips serial number has been removed or

defaced, or (e) product, accessories or consumables sold “AS IS”

without warranty of any kind by including refurbished Philips

product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

• Shipping charges to return defective product to Philips.

• Labor charges for installation or setup of the product, adjust-

ment of customer controls on the product, and installation or

repair of antenna/signal source systems outside of the product.

• Product repair and/or part replacement because of improper

installation or maintenance, connections to improper voltage

supply, power line surge, lightning damage, retained images or

screen markings resulting from viewing fixed stationary con-

tent for extended periods, product cosmetic appearance items

due to normal wear and tear, unauthorized repair or other

cause not within the control of Philips.

• Damage or claims for products not being available for use, or

for lost data or lost software.

• Damage from mishandled shipments or transit accidents when

returning product to Philips.

• A product that requires modification or adaptation to enable

it to operate in any country other than the country for which

it was designed, manufactured, approved and/or authorized, or

repair of products damaged by these modifications.

• A product used for commercial or institutional purposes

(including but not limited to rental purposes).

• Product lost in shipment and no signature verification receipt

can be provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,

PUERTO RICO, OR U.S. VIRGIN ISLANDS…

Contact Philips Customer Care Center at:

1-866-309-5962

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-

SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-

TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF

ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-

UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE

LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT

IS LIMITED IN DURATION TO THE DURATION OF THIS

WARRANTY.

Some states do not allow the exclusions or limitation of inciden-

tal or consequential damages, or allow limitations on how long an

implied warranty lasts, so the above limitations or exclusions may

not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248

License

P&F USA, Inc. hereby offers to deliver, upon request, a copy of the

complete corresponding source code for the copyrighted open source

code packages, on an “AS IS” basis, used in this product for which such

offer is requested by the respective licenses. This offer is valid up to

three years after the product purchase to anyone in receipt of this

information. To obtain source code, please contact P&F USA, Inc. You

should write to “Open Source Team, P&F USA, Inc., PO Box 2248,

Alpharetta, GA 30023-2248. P&F USA, Inc. disclaims any and all

warranties and representations with respect to such software and

related source code including quality, reliability, usability, and accuracy,

and further disclaim all express, implied, statutory or otherwise, including

without limitation, any implied warranties of title, non-infringement,

merchantability, or fitness for a particular purpose. P&F USA, Inc. shall

not be liable to make any corrections to the open source software or

source code or to provide any support or assistance with respect to it.

P&F USA, Inc. disclaims any and all liability arising out of or in connection

with the use of this software and/or source code.

P&F USA, Inc.

PO Box 2248, Alpharetta, GA 30023-2248

P&F Mexicana, S.A. de C.V.

Av. La Palma No. 6, Col. San Fernando La Herradura.

Huixquilucan, Edo. de México. C.P. 52787

Philips and Philips Shield are used under license of

Koninklijke Philips N.V.

A37U0UH / A37Q0UH / A37QAUH / A3RP0UH /

A3RT0UH / A3RTBUH / A3RF0UT / A3RM0UT

★★★

Table of Contents

Philips 39PFL2608/F7 User Manual

Related Manuals