Table of Contents
- Contents
- 1 - My new TV
- 2 - Setting up
- 3 - Network
- 4 - Connections
- 4.1 - Tips on connections
- 4.2 - EasyLink HDMI CEC
- 4.3 - Common interface - CAM
- 4.4 - Set-top box - STB
- 4.5 - Home Theatre System - HTS
- 4.6 - Blue-ray Disc player
- 4.7 - DVD player
- 4.8 - Game console
- 4.9 - USB Hard Drive
- 4.10 - USB keyboard or mouse
- 4.11 - USB flash drive
- 4.12 - Photo camera
- 4.13 - Camcorder
- 4.14 - Computer
- 4.15 - Headphones
- 5 - Switch on
- 6 - Remote control
- 7 - TV channels
- 8 - Home menu
- 9 - TV guide
- 10 - Sources
- 11 - Timers and clock
- 12 - Games
- 13 - Your photos, videos and music
- 14 - Pause TV
- 15 - Recording
- 16 - Smart TV
- 17 - Multi room
- 18 - Settings
- 19 - Specifications
- 20 - Software
- 21 - Troubleshooting and support
- 22 - Safety and care
- 23 - Terms of use, copyrights and licenses
- Index
Philips 40PFT5300/56 User Manual
Displayed below is the user manual for 40PFT5300/56 by Philips which is a product in the TVs category. This manual has pages.
Related Manuals
Register your product and get support at series
www.philips.com/welcome
User Manual
40PFT5300
Contents
1 My new TV 3
1.1 Smart TV 3
1.2 App gallery 3
1.3 Rental videos 3
1.4 Social networks 3
1.5 Pause TV and recordings 3
1.6 EasyLink 4
2 Setting up 5
2.1 Read safety 5
2.2 TV stand and wall mounting 5
2.3 Tips on placement 5
2.4 Power cable 5
2.5 Antenna cable 6
3 Network 7
3.1 Wireless network 7
3.2 Wired network 8
3.3 Network settings 8
4 Connections 10
4.1 Tips on connections 10
4.2 EasyLink HDMI CEC 11
4.3 Common interface - CAM 12
4.4 Set-top box - STB 13
4.5 Home Theatre System - HTS 13
4.6 Blue-ray Disc player 15
4.7 DVD player 15
4.8 Game console 15
4.9 USB Hard Drive 16
4.10 USB keyboard or mouse 16
4.11 USB flash drive 17
4.12 Photo camera 18
4.13 Camcorder 18
4.14 Computer 19
4.15 Headphones 19
5 Switch on 20
5.1 On or Standby 20
5.2 Keys on TV 20
6 Remote control 21
6.1 Key overview 21
6.2 IR sensor 21
6.3 Batteries 22
6.4 Cleaning 22
7 TV channels 23
7.1 Watching TV channels 23
7.2 Channel installation 28
8 Home menu 32
9 TV guide 33
9.1 What you need 33
9.2 Using the TV guide 33
9.3 Recording 33
10 Sources 34
10.1 Sources list 34
10.2 From standby 34
10.3 EasyLink 34
11 Timers and clock 35
11.1 Sleeptimer 35
11.2 Clock 35
11.3 Switch off timer 35
12 Games 36
12.1 Play a game 36
13 Your photos, videos and music 37
13.1 From a USB connection or network computer
37
13.2 Wi-Fi Miracast 38
14 Pause TV 40
15 Recording 41
15.1 What you need 41
15.2 Record a programme 41
15.3 Watch a recording 42
16 Smart TV 43
16.1 About Smart TV 43
16.2 What you need 43
16.3 Setup Smart TV 43
16.4 Smart TV Apps 43
16.5 Multi view 45
16.6 Reset Smart TV 45
17 Multi room 46
17.1 About Multi room 46
17.2 What you need 46
17.3 Using Multi room 46
18 Settings 48
18.1 Setup menu 48
18.2 Picture 49
18.3 Sound 51
18.4 Universal access 54
19 Specifications 56
19.1 Environmental 56
19.2 Reception 56
19.3 Display 57
19.4 Power 57
19.5 Dimensions and weights 57
19.6 Connectivity 57
19.7 Multimedia 58
20 Software 59
20.1 Software update 59
20.2 Software version 59
20.3 Open source software 59
20.4 Open source license 59
21 Troubleshooting and support 66
21.1 Troubleshooting 66
21.2 Register 67
21.3 Help 67
21.4 Online help 68
21.5 Consumer Care / Repair 68
22 Safety and care 69
22.1 Safety 69
22.2 Screen care 70
23 Terms of use, copyrights and licenses
71
23.1 Terms of use 71
23.2 Copyrights and licenses 71
Index 74
2
1
My new TV
1.1
Smart TV
Connect this Philips Smart LED TV to the Internet and
discover a new world of television. You can make a
wired connection to your router or you can link up
wirelessly with Wi-Fi.
With the TV connected to your home network, a
smartphone can show a photo on TV, you can play
videos stored on your computer or control the TV with
your tablet.
With your TV connected to the Internet, you can
watch a rental video from an online video store, read
the online TV guide or record your favourite TV show
on a USB Hard Drive.
The Smart TV Apps add to the fun with all sorts of
entertainment and convenient services.
In Help, press Keywords and look up Smart TV
for more information.
1.2
App gallery
Open the App gallery in Smart TV to browse the
Apps, the collection of tailored websites for TV.
Find the App for YouTube videos, a national
newspaper, an online photo album, Twitter, etc.
There are Apps to rent a video from an online video
store and Apps for watching programmes you
missed.
If the App gallery does not hold what you are
looking for, try the World Wide Web and surf the
Internet on TV.
In Help, press Keywords and look up App
gallery for more information.
1.3
Rental videos
To watch a rental video, you don't need to leave your
home.
Simply rent the latest movie from your regional online
video store.
Start Smart TV and add the video store App to the
Smart TV start page.
Open the video store App, create your personal
account, select the movie and press play.
No fuss with downloading, you can watch the
movie immediately*.
In Help, press Keywords and look up Rental
videos for more information.
* Depending on the video streaming service of the
selected video store.
1.4
Social networks
No need to get up to check your friend's messages on
your computer.
On this TV you get the messages from your social
network on your TV screen. You can send a return
message from your couch. You can find the Twitter
App on the Home menu tab Apps.
In Help, press Keywords and look up App
gallery for more information.
1.5
Pause TV and recordings
If you connect a USB Hard Drive, you can pause and
record a broadcast from a digital TV channel.
Pause your TV and answer that urgent phone call or
simply take a break during a sports match, while the
TV stores the broadcast on the USB Hard Drive. You
can start watching again later.
With a USB Hard Drive connected, you can also
record digital broadcasts. You can record while you
are watching a programme or schedule a recording
3
of an upcoming programme.
In Help, press Keywords and look up Pause TV
or Recording for more information.
1.6
EasyLink
With EasyLink you can operate a connected device,
like a Bluray Disc player, with the remote control of
the TV.
EasyLink uses HDMI CEC to communicate with the
connected devices.
In Help, press Keywords and look
up EasyLink for more information.
4
2
Setting up
2.1
Read safety
Read the safety instructions first before you use the
TV.
In Help, go to Safety and care > Safety.
2.2
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
In case you lost this guide, you can download it from
www.philips.com.
Use the product type number of the TV to look for the
Quick Start Guide to download.
Wall mounting
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
To fix the bracket securely, use screws with a length
indicated in the drawing.
• For 5300 series 40-inch TV
VESA MIS-F 200x200, M4
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TV's weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
2.3
Tips on placement
• Position the TV where light does not shine directly
on the screen.
• Position the TV up to 15 cm away from the wall.
• The ideal distance to watch TV is 3 times its diagonal
screen size. When seated, your eyes should be level
with the centre of the screen.
2.4
Power cable
• Insert the power cable into the POWER connector
on the back of the TV.
• Make sure the power cable is securely inserted in
the connector.
• Make sure that the power plug, in the wall socket, is
accessible at all times.
• When you unplug the power cable, always pull the
plug, never pull the cable.
5
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
In Help, press Keywords and look up Switching
on for more information on switching the TV on or off.
2.5
Antenna cable
Insert the antenna plug firmly into the ANTENNA
socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
6
3
Network
3.1
Wireless network
What you need
To connect the TV wirelessly to the Internet, you need
a wireless router. Use a high-speed (broadband)
connection to the Internet..
Network devices
The TV can connect to other devices in your wireless
network, like your computer or smartphone. You can
use a computer with Microsoft Windows or Apple OS
X.
File sharing
On this TV, you can open photos, music and videos
stored on your computer. Use a recent version of
media server software like Philips MediaManager*,
Windows Media Player 11, Twonky™ or similar.
Install the media server software on your computer
and set it up to share your media files with the TV.
Read the manual of the media server software for
more information. This software must be running on
your computer to view or play your files on TV.
* You can download the Philips MediaManager
software from the Philips support
site www.philips.com/support
Make the connection
Follow steps 1 to 5.
Step 1 - Make sure that the router of your wireless
network is switched on.
Step 2 - Press and select Setup and press OK.
Step 3 - Select Connect to network and press OK.
Step 4 - Select Connect and press OK.
Step 5 - Select Wireless and press OK.
Step 6 - Select Scan to scan for your wireless
network. If you have a router with WPS (Wi-Fi
Protected Setup), you can select WPS. Select your
choice and press OK.
• Scan
Select Scan to scan for your wireless network (your
wireless router). The TV might find several wireless
networks in your proximity.
• WPS
If your router has WPS, you can directly connect to
the router without scanning. Go to the router, press
the WPS button and return to the TV within 2 minutes.
Then press Connect to make the connection.
If you have devices in your wireless network that use
the WEP security encryption system, you cannot use
WPS.
If you must use the WPS PIN code to connect, select
Scan instead of WPS.
Step 7 - In the list of networks found, select your
wireless network and press OK.
If your network is not in the list because the network
name is hidden (you switched off the SSID broadcast
of the router), select Manual entry to enter the
network name yourself.
Step 8 - Depending on the type of router, you can
now enter your encryption key (WEP, WPA or WPA2).
If you entered the encryption key for this network
before, you can select Next to make the connection
immediately.
If your router supports WPS or WPS PIN, you select
WPS, WPS PIN or Standard. Select your choice and
press OK.
• Standard
Select Standard to enter the encryption key
(password, passphrase or security key) manually.You
can use the keyboard on the RC to enter the
encryption key. Once you have entered the key, press
Connect.
• WPS PIN
To make a secured WPS connection with a PIN code,
select WPS PIN and press OK. Write down the 8-digit
PIN code shown and enter it in the router software on
your PC. Return to the TV and press Connect. Consult
the router manual on where to enter the PIN code in
the router software.
Step 9 - A message will be shown when the
connection is successful.
Network configuration
If the connection fails, you can check the DHCP
setting of the router. DHCP should be set to On.
Alternatively, if you are an advanced user and want to
install your network with Static IP addressing, set the
TV to Static IP.
To set the TV to Static IP, press and select Setup
and press OK. Select Network settings > Network
settings > Network configuration > Static IP. With
Static IP selected in the menu, you can set the IP
address and other necessary settings in Static IP
configuration in the same menu.
7
Network problems
Wireless network not found or distorted
• Microwave ovens, DECT phones or other Wi-Fi
802.11b/g/n devices in your proximity might disturb
the wireless network.
• Make sure that the firewalls in your network allow
access to the TV's wireless connection.
• If the wireless network does not work properly in
your home, try the wired network installation.
Internet does not work
• If the connection to the router is OK, check the
router connection to the Internet.
The PC and Internet connection are slow
• Look in your wireless router's user manual for
information on indoor range, transfer rate and other
factors of signal quality.
• Use a high-speed (broadband) Internet connection
for your router.
3.2
Wired network
What you need
You need a network router to connect the TV to the
Internet. Use a router with a high-speed (broadband)
connection to the Internet.
File sharing
On this TV, you can open photos, music and videos
stored on your computer. Use a recent version of
media server software like Philips MediaManager*,
Windows Media Player 11, Twonky™ or similar.
Install the media server software on your computer
and set it up to share your media files with the TV.
Read the manual of the media server software for
more information. This software must be running on
your computer to view or play your files on TV.
* You can download the Philips MediaManager
software from the Philips support
site www.philips.com/support
In Help, press Keywords and look up Media
server software, supported for an overview of
supported media server software.
Connect the router
To connect and setup the router follow steps 1 to 5.
1 - Connect the router to the TV with a network cable
(Ethernet cable**).
2 - Make sure that the router is switched on.
3 - Press and select Setup and press OK.
4 - Select Connect to network and press OK.
5 - Select Wired and press OK.
The TV constantly searches for the network
connection. A message will be shown when the
connection is successful.
Network configuration
If the connection fails, you can check the DHCP
setting of the router. DHCP should be set to On.
Alternatively, if you are an advanced user and want to
install your network with static IP addressing, set the
TV to Static IP.
To set the TV to Static IP, press and
select Setup and press OK.
Select Network settings > Network
settings > Network configuration > Static IP. With
Static IP selected in the menu, you can set the IP
address and other necessary settings in Static IP
configuration in the same menu.
**To fulfill EMC regulations, use a shielded FTP Cat.
5E Ethernet cable.
3.3
Network settings
To open the Network settings . . .
1 - Press and select Setup and press OK.
2 - Select Network settings and press OK.
• View network settings
All current network settings are shown here. The IP
and MAC address, signal strength, speed, encryption
method, etc.
• Network settings
- Network type
Sets the network to Wired or Wireless.
- Network configuration
Sets the network configuration to DHCP or Static IP.
• Wi-Fi media playback
To receive multimedia files from smartphones or
tablets, set the DMR to On.
• Static IP configuration
8
If Static IP is selected in Network Settings menu, you
can set all necessary static IP settings here.
• Wi-Fi Miracast
For more information on Wi-Fi Miracast,
press Keywords and look up Wi-Fi Miracast™.
• Reset Wi-Fi Miracast group
Clear the list of connected and blocked devices that
are used with Miracast.
• Wi-Fi smart screen
For more information on Wi-Fi smart screen,
press Keywords and look up Wi-Fi smart
screen.
• TV network name
If you have more than one TV in your network, you
can rename the TVs here.
• Netflix Settings
Adjust Netflix settings.
• Clear Internet memory
With Clear Internet memory, you can clear all Internet
files stored on your TV. You clear your Philips Smart
TV registration and parental rating settings, your
video store app logins, all Smart TV app favourites,
Internet bookmarks and history. Interactive MHEG
applications can also save so-called 'cookies', on
your TV. These files will also be cleared.
9
4
Connections
4.1
Tips on connections
Connectivity guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
If you need help to connect several devices to the TV,
you can visit the Philips TV connectivity guide. The
guide offers information on how to connect and
which cables to use.
Go to www.connectivityguide.philips.com
Antenna
If you have a Set-top box (a digital receiver) or
Recorder, connect the antenna cables to run the
antenna signal through the Set-top box and/or
Recorder first before it enters the TV. In this way, the
antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI
HDMI CEC
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for High Definition (HD)
TV signals. For best signal quality transfer, use a High
speed HDMI cable and do not use an HDMI cable
longer than 5 m.
EasyLink HDMI CEC
If your devices are connected with HDMI and have
EasyLink, you can operate them with the TV remote
control. EasyLink HDMI CEC must be switched On on
the TV and the connected device.
For more information on using EasyLink, press
Keywords and look up EasyLink CEC.
DVI to HDMI
Use a DVI to HDMI adapter if your device only has a
DVI connection. Use one of the HDMI connections
and add an Audio L/R cable (mini-jack 3.5mm) to
AUDIO IN for sound, on the back of the TV.
Copy protection
DVI and HDMI cables support HDCP (High-bandwidth
Digital Content Protection). HDCP is a copy protection
signal that prevents copying content from a DVD disc
or Blu-ray Disc. Also referred to as DRM (Digital
Rights Management).
HDMI ARC
All of the HDMI connections on the TV have HDMI
ARC (Audio Return Channel).
If the device, typically a Home Theatre Sysytem
(HTS), also has the HDMI ARC connection, connect it
to any of the HDMI connections on this TV. With the
HDMI ARC connection, you do not need to connect
the extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
You can use any HDMI connection on this TV to
connect the HTS but ARC is only available for 1
device/connection at a time.
In case you prefer to switch off ARC on the HDMI
connections, press and select Setup and press OK.
Select TV settings > Sound > Advanced > HDMI ARC.
Y Pb Pr - Audio L R
Y Pb Pr - Component Video is a high quality
connection. The YPbPr connection can be used for
High Definition (HD) TV signals. Next to the Y, Pb and
Pr signals add the Audio Left and Right signals for
sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
10
• Only for TVs with component connectors.
CVBS - Audio L R
CVBS - Composite Video is a high quality
connection. Next to the CVBS signal adds the Audio
Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
• Only for TVs with component/composite
connectors.
Scart
SCART is a good quality connection. The SCART
connection can be used for CVBS and RGB video
signals but cannot be used for High Definition (HD) TV
signals. The SCART connection combines video and
audio signals.
Use the SCART adapter cable to connect your device.
Audio Out - Optical
Audio Out - Optical is a high quality sound
connection. This optical connection can carry 5.1
audio channels. If your device, typically a Home
Theatre System (HTS), has no HDMI ARC connection,
you can use this connection with the Audio In -
Optical connection on the HTS. The Audio Out -
Optical connection sends the sound from the TV to
the HTS.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theatre System.
For more information, press Keywords and look
up Audio Out settings.
If the sound does not match the video on screen, you
can adjust the audio to video synchronisation.
For more information, press Keywords and look
up Audio to video sync.
4.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
(Consumer Electronics Control) to communicate with
the connected devices. Devices must support HDMI
CEC and must be connected with an HDMI
connection.
EasyLink setup
The TV comes with EasyLink switched on. Make sure
that all HDMI CEC settings are properly set up on the
connected EasyLink devices. EasyLink might not work
with devices from other brands.
HDMI CEC on other brands
The HDMI CEC functionality has different names on
different brands. Some examples are: Anynet, Aquos
11
Link, Bravia Theatre Sync, Kuro Link, Simplink and
Viera Link. Not all brands are fully compatible with
EasyLink.
Example HDMI CEC branding names are property of
their respective owners.
Operate devices
To operate a device connected to HDMI and set up
with EasyLink, select the device - or its activity - in
the list of TV connections. Press SOURCES , select
a device connected to an HDMI connection and press
OK.
Once the device is selected, the TV remote control
can control the device. However and OPTIONS
keys and some other TV keys are not forwarded to
the device.
If the key you need is not on the TV remote control,
you can select the key in the Options menu.
Press OPTIONS and select Controls in the menu
bar. On the screen, select the device key you need
and press OK.
Some very specific device keys might not be available
in the Controls menu.
Note: Only devices that support EasyLink remote
control function will respond to the TV remote
control.
EasyLink settings
The TV comes with all EasyLink settings switched on.
You can switch off any EasyLink setting
independently.
EasyLink
To switch off EasyLink completely . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > EasyLink,
and press OK.
3 - Select Off and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
EasyLink Remote Control
If you want devices to communicate but you don't
want to operate them with the TV remote control, you
can switch off EasyLink remote control separately.
In the EasyLink settings menu, select EasyLink
remote control and select Off.
Pixel Plus Link
Some devices, a DVD or Blu-ray Disc player, might
have their own picture quality processing. To avoid
bad picture quality caused by interference with the
TV processing, the picture processing of these devices
should be disabled. The TV comes with Pixel Plus Link
switched on and disables the picture quality
processing of recent Philips devices connected to the
TV.
To switch off Pixel Plus Link, in the EasyLink settings
menu, select Pixel Plus Link and select Off.
Auto switch off devices
You can set the TV to switch off the connecting HDMI-
CEC compliant devices if they are not the active
source. The TV switches the connected device to
standby after 10 minutes of inactivity.
4.3
Common interface - CAM
CI+
This TV is ready for the CI+ Conditional Access.
With CI+ you can watch premium HD programmes,
like movies and sports, offered by digital TV
broadcasters in your region. These programmes are
scrambled by the TV broadcaster and descrambled
with a prepaid CI+ module.
Digital TV broadcasters provide this CI+ module
(Conditional Access Module - CAM) when you
subscribe to their premium programmes. These
programmes have a high level of copy protection.
Contact a digital TV broadcaster for more information
on terms & conditions.
For more information on connecting a CAM module,
press Keywords and look up Common Interface
CAM.
CAM
Insert a CAM module
Switch off the TV before inserting a CAM.
Look on the CAM for the correct method of insertion.
Incorrect insertion can damage the CAM and TV.
12
Use the Common Interface slot on the TV to insert the
CAM card.
With the front of the card facing towards you, gently
insert the CAM as far as it will go.
Leave the card in the slot permanently.
It may take a few minutes before the CAM is
activated. Removing the CAM will deactivate the
broadcast service on TV.
If a CAM is inserted and subscription fees are paid,
(connection methods can differ), you can watch the
TV broadcast. The inserted CAM is exclusively for
your TV.
CAM settings
To set passwords or PIN codes for the CAM TV
broadcast, press and select Setup and press OK.
Select Channel settings > Common Interface.
Select the CAM TV broadcaster and press OK.
4.4
Set-top box - STB
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Alternatively, you can use a SCART cable if the Set-
top box has no HDMI connection.
Switch off timer
Switch off this automatic timer, if you only use the
remote control of the Set-top box. Do this to prevent
the TV from switching off automatically after a 4 hour
period without a key press on the remote control of
the TV.
To switch off the Switch off timer, press and
select Setup and press OK.
Select TV settings > General settings > Switch off
timer and set the slider bar to Off.
4.5
Home Theatre System - HTS
Connect HTS
Use an HDMI cable to connect a Home Theatre
System (HTS) to the TV. You can connect a Philips
Soundbar or an HTS with a built-in disc player.
Alternatively, you can use a SCART cable if the device
has no HDMI connection.
HDMI ARC
If your Home Theatre System has an HDMI ARC
connection, you can use any HDMI connection on the
TV to connect. With HDMI ARC, you do not need to
connect the extra audio cable. The HDMI ARC
connection combines both signals.
All HDMI connections on the TV can offer the Audio
Return Channel (ARC) signal. But once you have
connected the Home Theatre System, the TV can
only send the ARC signal to this HDMI connection.
If the Home Theatre System has no HDMI ARC
connection, add an optical audio cable (Toslink) to
send the sound of the TV picture to the Home Theatre
System.
13
Audio to video synchronisation (sync)
If the sound does not match the video on screen, you
can set a delay on most Home Theatre Systems with
a disc player to match the sound with the video.
For more information, press Keywords and look
up Audio to video sync.
Audio Out settings
Audio Out delay
With a Home Theatre System (HTS) connected to the
TV, the picture on TV and the sound from the HTS
should be synchronised.
Automatic audio to video sync
With recent Philips Home Theatre Systems, the audio
to video sync is done automatically synchronised and
always correct.
Audio sync delay
For some Home Theatre Systems you might need to
adjust the audio sync delay to synchronise the audio
to the video. On the HTS, increase the delay value
until there is a match between picture and sound. A
delay value of 180ms may be required. Read the user
manual of the HTS. With a delay value set up on the
HTS, you need to switch off Audio out delay on the
TV.
To switch off the Audio Out delay . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Audio
out delay.
3 - Select Off and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Audio Out offset
If you cannot set a delay on the Home Theatre
System, you can set the TV to sync the sound. You
can set an offset that compensates for the time
necessary for the Home Theatre System to process
the sound of the TV picture. You can set the value in
steps of 5ms. Maximum setting is -60ms. The Audio
Out delay setting should be switched on.
To synchronise the sound on the TV . . .
1 - Press and select Setup and press OK.
2 - Select TV
settings > Sound > Advanced > Audio out offset.
3 - Use the slider bar to set the sound offset and
press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Audio Out format
If you have a Home Theatre System (HTS)
with multichannel sound processing capabilities like
Dolby Digital, DTS® or similar, set the Audio out
format to Multichannel. With Multichannel, the TV can
send the compressed multichannel sound signal from
a TV channel or connected player to the Home
Theatre System. If you have a Home Theatre System
without multichannel sound processing, select Stereo.
To set the Audio out format . . .
1 - Press and select Setup and press OK.
2 - Select TV
settings > Sound > Advanced > Audio out format.
3 - Select Multichannel or Stereo.
4 - Press , repeatedly if necessary, to close the
menu.
Audio Out levelling
Use the Audio Out levelling setting to level the
volume (loudness) of the TV and the Home Theatre
System when you switch over from one to another.
Volume differences can be caused by differences in
sound processing.
To level the difference in volume . . .
1 - Press and select Setup and press OK.
2 - Select TV
settings > Sound > Advanced > Audio out
levelling.
3 - If the volume difference is large, select More. If
the volume difference is small, select Less.
4 - Press , repeatedly if necessary, to close the
menu.
Audio Out levelling affects both the Audio Out -
Optical and HDMI ARC sound signals.
Problems with HTS sound
Sound with loud noise
If you watch a video from a plugged in USB flash drive
or connected computer, the sound from your Home
Theatre System might be distorted. This noise is heard
when the audio or video file has DTS sound but the
Home Theatre System has no DTS sound processing.
You can fix this by setting the Audio out format of the
TV to Stereo.
Press and select Setup > TV settings > Sound >
Advanced > Audio out format.
No sound
If you cannot hear the sound from the TV on your
Home Theatre System, check the following . . .
• Check if you connected the HDMI cable to an HDMI
14
ARC connection on the Home Theatre System. All
HDMI connections on the TV are HDMI ARC
connections.
• Check if the HDMI ARC setting on the TV is switched
On.
Press and select Setup > TV settings > Sound >
Advanced > HDMI ARC.
4.6
Blue-ray Disc player
Use a High speed HDMI cable to connect the Blu-ray
Disc player to the TV.
If the Blu-ray Disc player has EasyLink HDMI CEC,
you can operate the player with the TV remote
control.
For more information on EasyLink, press
Keywords and look up EasyLink HDMI CEC.
4.7
DVD player
Use an HDMI cable to connect the DVD player to the
TV.
Alternatively, you can use a SCART cable, if the
device has no HDMI connection.
If the DVD player is connected with HDMI and has
EasyLink CEC, you can operate the player with the TV
remote control.
For more information on EasyLink,
press Keywords and look up EasyLink HDMI
CEC.
4.8
Game console
HDMI
For best quality, connect the game console with an
High speed HDMI cable to the TV.
Y Pb Pr - Audio L R
Connect the game console with a component video
cable (Y Pb Pr) and an audio L/R cable to the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
CVBS - Audio L R / Scart
Connect the game console to the TV with a
composite cable (CVBS) and an audio L/R cable to
the TV.
If your game console only has Video (CVBS) and
Audio L/R output, use a Video Audio L/R to SCART
adapter to connect to the SCART connection.
Note: the CVBS to SCART Adapter is not provided in
the TV set.
15
CVBS - Audio L R
Connect the game console to the TV with a
composite cable (CVBS) and an audio L/R cable to
the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.9
USB Hard Drive
What you need
If you connect a USB Hard Drive, you can pause or
record a TV broadcast. The TV broadcast must be a
digital broadcast (DVB broadcast or similar).
To pause
To pause a broadcast, you need a USB 2.0
compatible Hard Drive with a minimum of 32GB disk
space.
To record
To pause and record a broadcast, you need a
minimum of 250GB disk space.
TV guide
Before you decide to buy a USB Hard Drive to record,
you can check if it is possible to record digital TV
channels in your country.
Press TV GUIDE on the remote control. If there is
a Record button on the TV guide page, you can
record.
For more information on how to install a USB Hard
Drive, press Keywords and look up USB Hard
Drive, installation.
Installation
Before you can pause or record a broadcast, you
must connect and format a USB Hard Drive. If you
want to record a broadcast with TV guide data from
the Internet, you need to have the Internet
connection installed on your TV before you install the
USB Hard Drive. Formatting removes all files from the
USB Hard Drive.
1 - Connect the USB Hard Drive to one of the USB
connections on the TV. Do not connect another USB
device to the other USB ports when formatting.
2 - Switch on the USB Hard Drive and the TV.
3 - When the TV is tuned to a digital TV channel,
press (Pause). Trying to pause will start the
formatting.
Follow the instructions on screen.
When the USB Hard Drive is formatted, leave it
connected permanently.
Warning
The USB Hard Drive is formatted exclusively for this
TV, you cannot use the stored recordings on another
TV or PC. Do not copy or change recording files on
the USB Hard Drive with any PC application. This will
corrupt your recordings. When you format another
USB Hard Drive, the content on the former will be lost.
A USB Hard Drive installed on your TV will need
reformatting for use with a computer.
For more information, press Keywords and look
up Pause TV or Recording.
16
4.10
USB keyboard or mouse
USB keyboard
Connect a USB keyboard (USB-HID type) to enter text
on your TV.
You can connect a keyboard and a mouse to the TV.
Use one of the USB connections to connect.
Install the keyboard
To install the USB keyboard, switch on the TV and
connect the USB keyboard to one of the USB
connections on the TV. When the TV detects the
keyboard for the first time, you can select your
keyboard lay-out and test your selection. If you
select a Cyrillic or Greek keyboard lay-out first, you
can select a secondary Latin keyboard lay-out.
To change the keyboard lay-out setting when a lay-
out was selected…
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > USB
keyboard settings and press OK.
Keys for channel renaming
• Enter key = OK
• Backspace = delete character before cursor
• Arrow keys = navigate within a text field
• To switch between keyboard lay-outs, if a
secondary lay-out is set, press the Ctrl + Shift keys
simultaneously.
Keys for Smart TV Apps and Internet pages
• Shift + Tab = Next and Previous
• Home = scroll to the top of the page
• End = scroll to the bottom of the page
• Page Up = jump one page up
• Page Down = jump one page down
• + = zoom in one step
• - = zoom out one step
• * = fit the web page to the screen width.
USB mouse
Connect USB mouse
You can connect a USB mouse (USB-HID type) to
navigate pages on the Internet.
On an Internet page, you can select and click on links
more easily.
Connect the mouse
Switch the TV on and connect the USB mouse to one
of the USB connections on the TV. You can also
connect the USB mouse to a connected USB
keyboard.
Mouse clicks
• Left click = OK
You can use the scroll wheel to scroll pages up and
down.
For more information on how to connect a keyboard,
press Keywords and look up USB keyboard.
Mouse speed
You can adjust the speed of the mouse moving on
screen.
To adjust the speed . . .
1 - Press and select Setup and press OK.
2 - Select TV settings and press OK.
3 - Select General settings > Pointer / Mouse
settings and press OK.
4 - Press the arrows (up) or (down) to increase
or lower the speed.
5 - Press OK to store and close the setting.
6 - Press , repeatedly if necessary, to close the
menu.
17
4.11
USB flash drive
You can view photos or play your music and videos
from a connected USB flash drive.
Insert a USB flash drive in one of the USB
connections on the TV while the TV is switched on.
The TV detects the flash drive and opens a list
showing its content.
If the contents list does not appear automatically,
press SOURCES , select USB and press OK.
To stop watching the USB flash drive content, press
EXIT or select another activity.
To disconnect the USB flash drive, you can pull out
the flash drive anytime.
For more information on watching or playing content
from a USB flash drive, press Keywords and look
up Your photos, videos and music.
4.12
Photo camera
To view photos stored on your digital photo camera,
you can connect the camera directly to the TV.
Use one of the USB connections on the TV to
connect. Switch on the camera after you made the
connection.
If the contents list does not appear automatically,
press SOURCES , select USB and press OK.
Your camera might need to be set to transfer its
content with PTP (Picture Transfer Protocol). Read
the user manual of the digital photo camera.
For more information on viewing photos, press
Keywords and look up Your photos, videos and
music.
Ultra HD on USB
You can view photos in Ultra HD resolution from a
connected USB device or flash drive. The TV will
downscale the resolution to Ultra HD if the resolution
of the photo is higher. You cannot play a native Ultra
HD video on any of the USB connections.
4.13
Camcorder
HDMI
For best quality, use an HDMI cable to connect the
camcorder to the TV.
CVBS - Audio L R / Scart
You can use an HDMI, YPbPr or SCART connection to
connect your camcorder. If your camcorder only has
Video (CVBS) and Audio L/R output, use a Video
Audio L/R to SCART adapter to connect to the SCART
connection.
Note: the CVBS to Scart Adaptor is not provided in
the TV set.
18
CVBS - Audio L R
Use a Video Audio L/R cable to connect the
camcorder to the TV.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.14
Computer
Connect
You can connect your computer to the TV and use
the TV as a PC monitor.
With HDMI
Use an HDMI cable to connect the computer to the
TV.
With DVI to HDMI
Alternatively, you can use a DVI to HDMI adapter to
connect the PC to HDMI and an audio L/R cable (mini-
jack 3.5mm) to AUDIO IN L/R on the back of the TV.
Settings
Ideal monitor setting
If your computer is added as a Computer type of
device in the Source menu (the list of connections),
the TV is set to the ideal Computer setting
automatically.
If you use your computer to watch movies or use it to
play games, you might want to set the TV back to the
ideal TV watching or gaming setting.
To set the TV to the ideal setting manually . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced >
Activity style and press OK.
3 - Select Game (for gaming) or
select Computer (for watching a movie) and
press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Remember to set the Game or computer setting back
to Computer when you stop playing the game.
4.15
Headphones
You can connect a set of headphones to the
connection on the TV. The connection is a mini-jack
3.5mm. You can adjust the volume of the headphones
separately.
To adjust the volume . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Headphones
volume and press OK.
3 - Press (up) or (down) to adjust the volume.
4 - Press , repeatedly if necessay, to close the
menu.
19
5
Switch on
5.1
On or Standby
Make sure you plugged in the mains power on the
back of the TV before you switch on the TV.
If the red indicator light is off, press the Joystick on
the right side or on the back of the TV to put the TV in
standby - the red indicator will light up.
With the TV in standby, press on the remote
control to switch the TV on.
Switch to standby
To switch the TV to standby, press on the remote
control.
Switch Off
To switch the TV Off, press the Joystick on the right
or on the back. The red indicator light is off. The TV is
still connected to the mains power but consumes a
minimum of energy.
To switch off the TV completely, disconnect the
power plug.
When disconnecting the power plug, always pull the
power plug, never the cord. Ensure that you have full
access to the power plug, power cord and outlet
socket at all times.
5.2
Keys on TV
While the on-screen display is on, press the Joystick
to display the menu.
• Use the arrow/navigation keys to navigate up, down,
left or right.
• Press the Joystick to confirm a selection or setting.
20
6
Remote control
6.1
Key overview
Top
1 - Standby / On
To switch the TV On or back to Standby.
2 - Playback and record keys
• Play , to playback.
• Pause , to pause playback
• Stop , to stop playback
• Rewind , to rewind
• Fast forward , to go fast forward
• Record , to record now
3 - Settings
To open the Settings menu.
4 - TV GUIDE
To open or close the TV guide.
5 - SEARCH
To open the Popular searches page.
6 - Picture format
To open or close the Picture format menu.
7 - SOURCES
To open or close the Sources menu - the list of
connected devices.
8 - LIST
To open or close the channel list
Middle
1 - SMART TV
To open the Smart TV start page.
2 - Colour keys
Follow on screen instructions. Blue key , opens
Help.
3 - INFO
To open or close programme info.
4 - BACK
To switch back to the previous channel you selected.
To close a menu without changing a setting.
To go back to the previous Smart TV page.
5 - HOME
To open or close the home menu.
6 - EXIT
To switch back to watching TV.
7 - OPTIONS
To open or close the Options menu.
8 - OK key
To confirm a selection or setting.
9 - Arrow / navigation keys
To navigate up, down, left or right.
10 - MULTIVIEW
To open an extra small screen.
Bottom
1 - Volume
To adjust the volume level.
2 - Number keys and text keypad
To select a TV channel directly or to enter text.
3 - SUBTITLE
To switch subtitles on, off or Automatic.
4 - Mute
To mute the sound or to restore it.
5 - Channel
To switch to the next or previous channel in the
channel list.
To open the next or previous page in Text or start the
next or previous chapter on a disc.
6 - TEXT
To open or close Text / Teletext.
21
6.2
IR sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.
6.3
Batteries
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
3 - Reposition the battery door and slide it back until
it clicks.
Remove the batteries if you are not using the remote
control for a long time.
Safely dispose of your old batteries according to the
end of use directions.
For more information, press Keywords and look
up End of use.
6.4
Cleaning
Your remote control is treated with a scratch-resistant
coating.
To clean the remote control, use a soft damp cloth.
Never use substances such as alcohol, chemicals or
household cleaners on the remote control.
22
7
TV channels
7.1
Watching TV channels
Switch channels
To watch TV channels, press . The TV tunes to the
TV channel you last watched.
Alternatively, press to open the Home menu and
select Watch TV and press OK.
To switch channels, press + or -. If you know
the channel number, type in the number with the
number keys. Press OK after you entered the number
to switch channels.
To switch back to the previously tuned channel, press
.
To switch to a channel from a channel list
While watching a TV channel, press LIST to open
the channel lists.
The channel list can have several pages with
channels. To view the next or previous page, press
+ or - .
To close the channel lists without switching channels,
press LIST again.
Radio channels
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel.
Channel list
Favourite channels
You can create a favourite channel list that only holds
the channels you want to watch. With the Favourite
channel list selected, you will only see your favourite
channels when you switch through channels.
Create your favourite channel list
1 - While watching a TV channel, press LIST to
open the channel list.
2 - Select All to view all channels.
3 - Select the channel, and press to mark as
favourite.
4 - The selected channel is marked with a .
5 - To finish, press . The channels are added to
the Favourites list.
To remove a channel from the favourites list, select
the channel with , then press again to unmark
as favourite.
Reorder
You can reorder — reposition — channels in the
Favourite channel list.
1 - In the channel list Favourites, highlight the
channel you want to reposition.
2 - Press .
3 - Select the channel to reorder and press OK.
4 - Press the Navigation buttons to move the
highlighted channel to another location and press OK.
5 - Once complete, press EXIT to exit from
the Favourite channel list.
You can highlight another channel and do the same.
Channel list views
In the channel lists, you can find all installed TV and
radio channels.
Next to the channel list All, which holds all installed
channels, you can set up a list of Favourites, view the
installed Radio stations separately or discover the
newly added channels in New.
Channel logos
In some countries, the TV can show the channel
logos. If you do not want these logos to appear, you
can switch them off.
To switch off Channel logos . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General
settings > Channel logos and press OK.
3 - Select Off and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
23
Rename channels
You can rename channels in the channel list.
1 - Select the channel you want to rename in one of
the channel lists.
2 - Select the channel to rename.
3 - Press .
You can enter text with the remote control keyboard
or open the on-screen keyboard.
With the on-screen keyboard
• To open the on-screen keyboard, place the cursor in
the name text field and press OK.
• To delete the character in front of the cursor, press
Backspace .
• To enter a character, select the character with the
arrow keys and press OK.
• To select uppercase characters, press .
• To select numbers or special characters, press .
• When you are ready, press to close the on-
screen keyboard.
• To finish renaming, select Done and press OK.
With the remote control keyboard*
• To delete a character, position the cursor behind the
character and press .
• To enter a character, press the character on the
keyboard.
• When you are ready, press OK to select Done.
Press OK again to finish renaming.
For more information on using the keyboard,
press Keywords and look up Remote control,
keyboard.
* Only for the remote control with keyboard
Lock a channel
To prevent children from watching a channel or a
programme, you can lock channels or lock age rated
programmes.
Lock a channel
You can lock a channel to prevent children from
watching it. To watch a locked channel you need to
enter the Child lock code. You cannot lock
programmes from connected devices.
To lock a channel . . .
1 - While watching a TV channel, press LIST to
open the Channel list.
2 - In any list, select the channel you want to lock.
3 - Press OPTIONS and select Lock channel. In a
channel list, a locked channel is marked with a lock .
To unlock a channel, select the locked channel in the
channel list. Press OPTIONS and select Unlock
channel. You will need to enter the Child lock code.
Parental rating
To prevent children from watching a programme not
suitable for their age, you can use an age rating.
Some digital broadcasters have age rated their
programmes. When the age rating of a programme is
equal to or higher than the age you have set as age
rating for your child, the programme will be locked.
To watch a locked programme you must enter the
child lock code. The parental age rating is set for all
channels.
To set an age rating . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Child
lock > Parental rating and press OK.
3 - Enter a 4-digit Child lock code and confirm. Now
you can set an age rating.
4 - Set the age and press OK.
5 - Press , repeatedly if necessary, to close the
menu.
To switch off the parental age rating, select None as
age setting.
The TV will ask for the code to unlock the programme.
For some broadcasters / operators, the TV only locks
programmes with a higher rating.
Set or change the lock code
To set the lock code or to change the current code . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Child lock > Change
code and press OK.
3 - If a code is set already, enter the current Child
lock code and then enter the new code twice.
The new code is set.
Forgotten your Child lock code?
If you forgot your code, you can override the current
code and enter a new code.
1 - Press and select Setup and press OK.
2 - Select Channel settings > Child lock > Change
code and press OK.
3 - Enter the overriding code 8888.
4 - Now enter a new Child lock code and enter it
again to confirm.
Options for channels
While watching a channel, depending on the type of
channel (analogue or digital) you are watching or
depending on the TV settings you made, some
options are available.
Open the options menu
While watching a channel, press OPTIONS .
24
Universal access
With Universal access switched on, you can set some
options for hearing impaired and visually impaired
people.
For more information, press Keywords and look
up Universal access.
Video selection
Digital TV channels can offer multi video signals (multi-
feed broadcast), different camera viewpoints or
angles of the same event or different programmes on
one TV channel. The TV shows a message if any such
TV channels are available.
Subtitles
Switch Subtitles on or Subtitles off with this options.
Select Automatic to show subtitles only when the
sound is muted with .
Subtitle language
For digital broadcast, you can select an available
subtitle language temporarily if none of your
preferred languages are available.
For more information, press Keywords and look
up Subtitles.
Audio languages
For digital broadcast, you can select an available
audio language temporarily if none of your preferred
languages are available.
For more information, press Keywords and look
up Audio languages.
Dual I-II
If an audio signal contains two audio languages but
one language — or both — has no language
indication, this option is available.
Common interface
If prepaid premium content is available from a CAM,
you can set the provider settings with this option.
HbbTV on this channel
You can block the HbbTV pages from a channel that
offers HbbTV.
For more information, press Keywords and look
up HbbTV.
MHP applications
Enable or disable the MHP applications.
For more information, press Keywords and look
up MHP.
Status
Select Status to view technical information on the
channel (if it is analogue or digital) or a connected
device you are watching.
Share
Enables the user to communicate his activity with his
social networks (such as Twitter or email).
Picture format
If black bars appear on top and bottom or on both
sides of the picture, you can adjust the picture format
to a format that fills the screen.
To change the picture format . . .
1 - While watching a TV channel, press to open
the Picture format menu.
2 - Select a format from the list and press OK.
The following format can be available according the
picture on screen . . .
• Basic
- Fill screen
- Fit to screen
• Advanced
- Last setting
- Shift
- Zoom
- Stretch
- Native
- Undo
Text / Teletext
Text pages
To open Text (Teletext) while you are watching TV
channels, press TEXT.
To close Text, press TEXT again.
Select a Text page
25
To select a page . . .
1 - Enter the page number with the number keys.
2 - Use the arrow keys to navigate.
3 - Press a colour key to select a colour-coded
subject at the bottom of the screen.
Text sub-pages
A Text page number can hold several subpages. The
subpage numbers are shown on a bar next to the
main page number.
To select a subpage, press or .
T.O.P. Text pages
Some broadcasters offer T.O.P. Text.
To open T.O.P. Text pages within Text,
press OPTIONS and select T.O.P. overview.
Text options
In Text, press OPTIONS to select the following . . .
• Freeze page
To stop the automatic rotation of subpages.
• Dual screen / Full screen
To show the TV channel and Text alongside each
other.
• T.O.P. overview
To open T.O.P. Text.
• Enlarge
To enlarge the Text page for comfortable reading.
• Reveal
To unhide hidden information on a page.
• Cycle subpages
To cycle subpages when these are available.
• Language
To switch the group of characters that Text uses to
display correctly.
• Text 2.5
To activate the Text 2.5 for more colours and better
graphics.
Text setup
Text language
Some digital TV broadcasters have several Text
languages available.
To set your primary and secondary Text language . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Language.
3 - Select Primary Teletext or Secondary Teletext.
4 - Select your preferred Text languages.
5 - Press , repeatedly if necessary, to close the
menu.
Text 2.5
If available, Text 2.5 offers more colours and better
graphics. Text 2.5 is activated as a standard factory
setting.
To switch off Text 2.5 . . .
1 - Press TEXT.
2 - While watching the teletext, press OPTIONS.
3 - Select Text 2.5 > Off.
4 - Press , repeatedly if necessary, to close the
menu.
Menu language
To change the language or the TV menus and
messages . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Menu
language and press OK.
3 - Select the language you want and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Audio languages
If the TV channel broadcasts multiple or dual audio
languages, you can select your preferred audio
language.
1 - While you watch TV, press OPTIONS.
2 - For digital channels, select Audio language. For
analogue channels, select Alternate audio.
Press OK to confirm your selection.
3 - Select from the available languages, then
press OK.
Note:
If you have selected Alternate audio for analogue
channels, select between:
• Main: Primary audio language or
• SAP: Secondary audio language
Subtitles and languages
Subtitles
Switch subtitles on
To open the Subtitle menu, press SUBTITLE.
You can set subtitles to On, Off or Automatic.
To show subtitles when the broadcasted programme
is not in your language — the language you set for the
TV, select Automatic. Also, this setting will show
subtitles when you mute the sound with .
For analogue channels, subtitles must be made
available in Text.
26
Subtitles for digital channels
There is no need to set subtitles in Text for digital
channels.
Digital channels can offer several subtitle languages
for a programme. You can set a preferred primary and
secondary subtitle language. If subtitles in one of
these languages are available, the TV will show them.
If none of the preferred subtitle languages are
available, you can select another subtitle language
which is available.
To set the primary and secondary subtitle language . .
.
1 - Press and select Setup and press OK.
2 - Select Channel settings and select Languages >
Primary subtitles language or Secondary
subtitles language and press OK.
3 - Select a language and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
To select a subtitle language when none of your
preferred languages are available . . .
1 - Press OPTIONS .
2 - Select Subtitle language and select a language
you want temporarily and press OK.
Subtitles for analogue channels
For analogue channels, you need to make the
subtitles available for each channel manually.
1 - Switch to a channel and press TEXT to open Text.
2 - Enter the page number for subtitles, usually 888.
3 - Press TEXT again, to close Text.
If you select On in the Subtitle menu when watching
this analogue channel, subtitles will be shown if
available.
To know if a channel is analogue or digital, switch to
the channel and open Status in the Options menu.
Audio languages
Digital TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to this audio.
If none of the preferred audio languages is available,
you can select another audio language which is
available.
To set the primary and secondary audio language . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings and select Languages >
Primary audio language or Secondary
audio language and press OK.
3 - Select a language and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
To select an audio language when none of your
preferred audio language is available . . .
1 - Press OPTIONS .
2 - Select Audio language and select an audio
language you want temporarily and press OK.
Audio languages for the hearing and visually
impaired
Some digital TV channels broadcast special audio and
subtitles adapted for people who are hearing or
visually impaired.
For more information, press Keywords and look up
Universal access.
Menu language
To change the language or the TV menus and
messages . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Menu
language and press OK.
3 - Select the language you want and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Interactive TV
About iTV
With interactive TV, some digital broadcasters
combine their normal TV programme with information
or entertainment pages. On some pages, you can
respond to a programme or vote, do online shopping
or pay for a video-on-demand programme.
HbbTV, MHEG, ...
Broadcasters use various interactive TV systems:
HbbTV(Hybrid Broadcast Broadband TV) or
iTV(Interactive TV - MHEG). Interactive TV is
sometimes referred to as Digital Text or Red button.
But each system is distinct.
Visit the broadcaster's Internet website for more
information.
27
What you need
Interactive TV is only available on digital TV channels.
To enjoy the full benefits of Interactive TV, you need
a high-speed (broadband) Internet connection to the
TV.
HbbTV
If a TV channel offers HBBTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Press and select Setup and press OK.
2 - Select TV settings and select General
settings > HbbTV and press OK.
3 - Select On and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press OPTIONS and select HBB TV on this
channel and press OK.
3 - Select Off and press OK.
Use iTV
Open iTV pages
Most channels that offer HbbTV or iTV invite you to
press the key or OK key to open their
interactive programme.
Navigate iTV pages
You can use the arrow and colour keys, the number
keys and the key to navigate the iTV pages.
You can use the (Play), (Pause) and (Stop)
keys to watch videos within iTV pages.
Digital Text (UK only)
To open Digital Text, press TEXT. To close, press .
Close iTV pages
Most iTV pages inform you which key to use to close.
To force an iTV page to close, switch to the next TV
channel and switch back.
About interactive TV
With interactive TV, some digital broadcasters
combine their normal TV programme with information
or entertainment pages.
Note:
• You cannot download files to your TV with this
feature.
• Not all TV programmes, commercials and features
include closed captioning information.
• You cannot respond to the digital content.
Visit the broadcaster's Internet website for more
information.
7.2
Channel installation
Update channels
Automatic update
If you receive digital channels, you can set the TV to
automatically update the list with new channels.
Alternatively, you can start a channel update yourself.
Automatic channel update
Once a day, at 6 AM, the TV updates the channels
and stores new channels. New channels are stored in
the All channels list but also in the New channels list.
Empty channels are removed.
If new channels are found or if channels are updated
or removed, a message is shown at TV start up. The
TV must be in standby to automatically update
channels.
To switch off the message at start up . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings and press OK.
3 - Select Channel installation > Channel update
message > Off.
To switch off the Automatic channel update . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings and press OK.
3 - Select Channel installation > Automatic channel
update > Off and press OK.
Start an update
To start an update yourself . . .
1 - Press and select Setup and press OK.
2 - Select Search for channels and press OK.
3 - Select Update channels and follow the
instructions on screen. The update may take a few
minutes.
In certain countries, the Automatic channel update is
done while watching TV or any moment when the TV
is in standby.
28
Reinstall channels
You can search for and reinstall channels and leave
all other TV settings untouched. Alternatively, you can
do a full new TV installation.
If a child lock code is set, you will need to enter this
code before you can reinstall channels.
Reinstall channels
To reinstall the channels only . . .
1 - Press and select Setup and press OK.
2 - Select Search for channels > Re-install
channels and press OK.
3 - Select the country where you install the TV.
4 - Select Antenna (DVB-T) or Cable (DVB-C) . The
channel search may take a few minutes. Follow the
instructions on screen.
Full installation
To redo a full TV installation . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Reinstall
TV and press OK. The installation may take a few
minutes. Follow the instructions on screen.
Factory settings
Factory settings sets the TV back to the original TV
settings for picture and sound. To switch back to the
original Factory settings . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Factory
settings and press OK.
3 - Press OK to confirm.
4 - Press , repeatedly if necessary, to close the
menu.
Channel list copy
Introduction
Channel list copy is intended for dealers and expert
users. In some countries, Channel list copy is only
available for copying satellite channels.
With Channel list copy, you can copy the channels
installed on one TV onto another Philips TV of the
same range. With Channel list copy, you avoid the
time-consuming channel search by uploading a
predefined channel list on a TV. Use a USB flash drive
of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the
hardware type on the TV type plate on the back of
the TV. Typically noted as Q . . . LA
• Both TVs have compatible software versions.
Current version
You can check the current version of the TV software
with Current software
info in > Setup > Software settings.
Copy channel list
To copy a channel list . . .
1 - Switch on the TV which has its channels installed.
Plug in a USB memory device.
2 - Press and select Setup and press OK.
3 - Select TV settings > General settings > Channel
list copy > Copy to USB and press OK. To copy the
channel list from this TV, you might be asked to enter
the Child lock code you entered during the
installation.
4 - When copying is done, unplug the USB memory
device.
Now you can upload the copied channel list onto
another Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or
not, you must use a different way to upload a channel
list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and
select language and country. You can skip Search for
channels. Finish the installation.
2 - Plug in the USB memory device that holds the
channel list of the other TV.
3 - To start the channel list upload, press and
select Setup and press OK.
4 - Select TV settings > General settings > Channel
list copy > Copy to TV and press OK. You might be
asked to enter the Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB memory device.
To an already installed TV
1 - Verify the country setting of the TV. (To verify this
setting, press and select Setup and press OK.
Select Search for channels > Re-install channels and
press OK. Press and later Cancel to leave the
Search for channels.)
If the country is correct continue with step 2.
If the country is not correct, you need to start a
reinstallation. To start the reinstallation, press and
select Setup and press OK. Select TV settings >
General settings > Reinstall TV > OK. Select the
correct country and skip the Search for channels.
Finish the installation. When done, continue with step
2.
2 - Plug in the USB memory device that holds the
channel list of the other TV.
29
3 - To start the channel list upload, press and
select Setup and press OK.
4 - Select TV settings > General settings > Channel
list copy > Copy to TV and press OK. You might be
asked to enter the Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to
the TV successfully. Unplug the USB memory device.
DVB-T or DVB-C
DVB-T or DVB-C reception
If both DVB-T and DVB-C reception is available in
your country and if this TV is ready to receive DVB-T
and DVB-C for your country, you have selected one
or the other during the channel installation.
If you want to change the DVB setting to start a new
channel installation . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings and press OK.
3 - Select Channel installation > Antenna connection
> Antenna (DVB-T) or Cable (DVB-C) and press OK.
4 - Select the DVB setting you want.
5 - Press , repeatedly if necessary, to close the
menu.
DVB-C channel installation
For ease of use, all DVB-C settings are set to
automatic.
If your DVB-C provider gave you specific DVB-C
values, the network ID or network frequency, enter
these values when the TV asks for them during
installation.
It might be necessary to adjust the scanning (full or
quick scan) or enter a specific symbol rate in the
Settings menu while installing. To set a Symbol rate,
first set the Symbol rate to Manual.
Channel number conflicts
In some countries, different TV channels
(broadcasters) might have the same channel number.
While installing, the TV shows the list with channel
number conflicts. You need to select which TV
channel you want to install on a channel number with
multiple TV channels.
DVB-T + DVB-C
If you can use a DVB-T antenna input but also a DVB-
C input, you can set up your TV for both DVB-T and
DVB-C. Install one system followed by the other with
the necessary settings.
Once each system is installed, you need to switch the
antenna input signal on the Antenna connection on
the back of the TV and set the TV in the appropriate
system to view the installed channels on TV.
To select the DVB-T or DVB-C setting, see above.
DVB settings
Access DVB settings
1 - Press and select Setup and press OK.
2 - Select Search for channels and press OK.
3 - Select Re-install Channels.
4 - Select the country where you install this TV.
5 - Select Cable (DVB-C).
6 - Select Start to search channels, or
select Settings for DVB-C settings .
7 - Press , repeatedly if necessary, to close the
menu.
Symbol rate mode
If your cable provider did not give you a specific
symbol rate value to install the TV channels, leave the
Symbol rate mode setting on Automatic.
If you received a specific symbol rate value, select
Manual. However, the value you received could be in
the predefined list of symbol rates already. Select
Predefined symbol rates to check if your value is
available automatically.
Symbol rate
With the Symbol rate mode set to Manual, you can
enter the symbol rate value you received from your
cable provider. To enter the value, use the number
keys.
Network frequency mode
If you intend to use the fast Quick scan method in
Frequency scan to search for channels, select
Automatic. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable providers in your country.
If you received a specific network frequency value to
search for channels, select Manual.
Network frequency
With the Network frequency mode set to Manual, you
can enter the network frequency value received from
your cable provider here. To enter the value, use the
number keys.
Frequency scan
Select the method of searching for channels. You can
select the faster Quick scan method and use the
predefined settings used by most cable providers in
30
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended Full scan method. This method will take
more time to search for and install channels.
Digital channels
If you know your cable provider is not offering digital
channels, you can skip searching for digital channels.
Select Off.
Analogue channels
If you know your cable provider is not offering
analogue channels, you can skip searching for
analogue channels. Select Off.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
scrambled. If you did not subscribe to pay TV
channels or services, you can select Free channels
only.
For more information, press Keywords and look
up CAM - Conditional Access Module.
Reception quality
If you receive digital channels, you can check the
quality and signal strength of a channel.
If you have your own antenna, you can reposition the
antenna to try and improve the reception.
To check the reception quality of a digital channel . . .
1 - Tune to the channel.
2 - Press and select Setup and press OK.
3 - Select Channel settings > Channel installation >
Digital : reception test and press OK.
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number with
and and change the number with and . To
check the frequency, select Search and press OK.
If you use DVB-C to receive channels, the
option Symbol rate mode is available. For Symbol
rate mode, select Automatic, unless your cable
provider gave you a specific symbol rate value. To
enter the symbol rate value, use the number keys.
Manual installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Channel installation >
Analogue : Manual installation and press OK.
• System
To set up the TV system, select System and press OK.
Select your country or the part of the world where
you are now.
• Search channel
To find a channel, select Search channel and press
OK. Select Search and press OK. You can also enter a
frequency yourself. If the reception is poor, press
Search again. If you want to store the channel, select
Done and press OK.
• Fine tune
To fine tune a channel, select Fine tune and press OK.
You can fine tune the channel with or .
If you want to store the channel found, select Done
and press OK.
• Store current channel / Store as new channel
You can store the channel on the current channel
number or as a new channel number.
Select Store current channel or Store as new channel.
You can redo these steps until you have found all
available analogue TV channels.
31
8
Home menu
From the Home menu, you can start any activity you
can do with the TV.
Open the Home menu to start watching TV or start
watching a disc on your Home Theatre System. Also
in the Home menu, you can open Smart TV to surf the
Internet or open Help if you need information on
using the TV.
Open the Home menu
1 - To open the Home menu, press .
2 - Select an activity using the arrow keys and
press OK to start the activity.
3 - To close the Home menu without changing the
current activity, press .
• Help
Select Help and press OK to open the on screen
Help. You can look up a topic in an alphabetical list.
• Setup
Select Setup to install channels or adjust all TV
settings.
• Satellite
Select Satellite and press OK to watch satellite
channels.
• TV
Select TV and press OK to watch TV channels.
• Smart TV
Select Smart TV and press OK to open the Smart
TV start page.
• Source
Select Source and select a connected device in the
list underneath the icon. Press OK to switch to the
selected device.
• TV guide
Select TV guide and press OK to open a list of the
current and scheduled TV programmes of your
channels.
• Recordings
Select Recordings and press OK to open the list of
your recordings.
• Demo
Select Demo to watch demonstration videos.
32
9
TV guide
9.1
What you need
With the TV guide you can view a list of the current
and scheduled TV programmes of your channels.
Depending on where the TV guide information (data)
is coming from, analogue and digital channels or only
digital channels are shown. Not all channels offer TV
guide information.
The TV can collect TV guide information for the
channels that are installed on the TV (e.g the
channels you watch with Watch TV). The TV cannot
collect the TV guide information for channels viewed
from a digital receiver.
9.2
Using the TV guide
Open the TV guide
To open the TV guide, press TV GUIDE.
Press TV GUIDE again to close.
The first time you open the TV guide, the TV scans all
TV channels for programme information. This may
take several minutes. TV guide data is stored in the
TV.
Tune to a programme
Switch to a programme
From the TV guide, you can switch to a current
programme.
To select a programme, use the arrow keys to
highlight the programme name.
Navigate to the right to view programmes scheduled
later that day.
To switch to the programme (channel), select the
programme and press OK.
View programme details
To call up the details of the selected programme,
press INFO.
Change day
The TV guide can show scheduled programmes for
the upcoming days (maximum up to 8 days).
If the TV guide information comes from the
broadcaster, you can press + to view the
schedule of one of the next days. Press to go
back to the previous day.
Alternatively, you can press OPTIONS and
select Change day.
Select Previous day, Today or Next day and
press OK, to select the day of the schedule.
Set a reminder
You can set reminders that alert you of the start of a
programme with a message on screen.
• To set a reminder, select the programme in the
schedule and press for Set reminder. The
programme is marked with a clock.
• To cancel the reminder, press the for Clear
reminder.
• To view a list of all reminders you have set,
press OPTIONS, and select All reminders.
Search by genre
If the information is available, you can look up
scheduled programmes by genre like movies, sports,
etc.
To search for programmes by genre,
press OPTIONS and select Search by genre.
Select a genre and press OK. A list with the found
programmes appears.
9.3
Recording
From the TV guide, you can instantly record or
schedule a recording of a TV programme. To store the
recordings, connect a USB Hard Drive to the TV.
For more information on Recording, press
Keywords and look up Recording.
33
10
Sources
10.1
Sources list
In the list of connections - the Source menu - you can
find the devices connected to the TV. From this
Source menu, you can switch to a device.
Sources menu
To open the Sources menu, press SOURCES .
To switch to a connected device, select the device
with the arrows (left) or (right) and press OK.
For some devices (HDMI-CEC devices), you can
select an activity directly in the list underneath the
device icon.
Select the device and select an activity and press OK.
To close the Source menu without switching to a
device, press SOURCES again.
Automatic detection
When you connect a new device to the TV, the device
is detected automatically and put in the Sources
menu. The device is shown as an icon (the device
type) and has a name. If the device type does not
correspond with the device, e.g. the TV says it is a
player but it is not, you can change the type.
To change the type of the device, press Change
type and select a type that fits the device and
press OK.
If the name does not fit the device or you want to give
the device a name of your own, press Rename .
Use the remote control keypad to enter a new name.
An appropriate device type helps you in using the
device. The device type determines picture and
sound styles, resolution values, specific settings or the
position within the Sources menu.
When you connect a new device to the TV, the icon
of the device jumps to the front of the Sources menu.
If the TV does not detect the device automatically,
select the connection you used to connected the
device and adjust the Device type and name.
Original name and icon
To restore the device icon to its original name and
type icon, press OPTIONS. Select Original name
and icon and press OK.
Scan connections
To rescan all TV connections and update the Sources
menu, press OPTIONS. select Scan
connections and press OK.
10.2
From standby
With the TV in standby, you can switch on a
connected device with your TV remote control.
Play
To switch on both disc player and TV from standby
and start playing the disc or programme immediately,
press (play) on the TV remote control.
The device should be connected with an HDMI cable
and both TV and device must have HDMI CEC
switched on.
Home Theatre System
You can switch on your Home Theatre System to
listen to an audio disc or a radio channel and leave
the TV in standby.
To only switch on the HTS, with the TV in standby,
press SOURCES on the TV remote control.
10.3
EasyLink
With EasyLink you can operate a connected device
with the TV remote control. EasyLink uses HDMI CEC
to communicate with the connected devices. Devices
must support HDMI CEC and must be connected with
an HDMI connection.
For more information, press Keywords and look
up EasyLink.
34
11
Timers and clock
11.1
Sleeptimer
With the sleep timer, you can set the TV to switch to
standby automatically after a preset time.
To set the sleep timer . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Sleep
timer.
With the slider bar you can set the time to up to 180
minutes in increments of 5 minutes. If set to 0 mins,
the sleep timer is switched off. You can always switch
off your TV earlier or reset the time during the
countdown.
3 - Press , repeatedly if necessary, to close the
menu.
11.2
Clock
To know what time it is, press TV GUIDE to find
the time in the TV guide.
In some countries, digital broadcasts do not send UTC
- Coordinated Universal Time information. The
daylight saving change might be ignored and the TV
might show an incorrect time.
To correct the TV clock . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Clock
> Auto clock mode, a nd select Country dependent.
3 - Select Daylight saving and select the appropriate
setting.
4 - Press , repeatedly if necessary, to close the
menu.
To set the TV clock manually . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Clock
> Auto clock mode, a nd select Manual.
3 - Select Date and Time to adjust.
4 - Press , repeatedly if necessary, to close the
menu.
11.3
Switch off timer
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no input signal
nor remote control commands for 10 minutes, the TV
switches off automatically to save energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, you should deactivate
the automatic switch off.
To deactivate the Switch off timer . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Switch off
timer and set the slider bar to Off.
3 - Press , repeatedly if necessary, to close the
menu.
For more information on environmentally friendly TV
settings, press Keywords and look up Eco
settings.
35
12
Games
12.1
Play a game
With a game console connected to the TV, you can
play games on TV.
For more information on connecting a game console,
press Keywords and look up Game console,
connect.
Start a game
1 - Press SOURCES , select the game console
and press OK.
2 - On the game console, start the game and select
the multi or two-player mode.
Ideal game setting
For some games, where speed and precision is
needed, set the TV to the ideal Game setting before
you start playing.
If your game console is added as a Game type of
device in the Sources menu (list of connections), the
TV is set to the ideal Game setting automatically.
If the type of your game console is set as Player and
used as a disc player most of the time, leave the
device type set to Player.
To set the TV to the ideal setting manually . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced >
Activity style and press OK.
3 - Select Game and press OK.
4 - Press , repeatedly if necessary, to close the
menu. Remember to set Activity Style setting back
to TV when you stop playing the game.
36
13
Your photos, videos
and music
13.1
From a USB connection or
network computer
What you need
You can view your photos or play your music and
videos from a connected USB flash drive or USB Hard
Drive. If you have a computer in your home network,
you can view and play your files from your computer
on the TV.
From a USB device
With the TV switched on, plug in a USB flash drive or
USB Hard Drive to one of the USB connections. The
TV detects the device and lists your files.
If the list does not appear automatically, press
SOURCES , select Browse USB and press OK.
Warning
If you try to pause or record a programme with a USB
Hard Drive connected, the TV will ask you to format
the USB Hard Drive. This formatting will delete all
current files on the USB Hard Drive.
From a computer
If the TV and the computer are in the same network,
the TV can browse and play files stored on your
computer.
On your computer, you need to install media server
software like Twonky™ to share your files with the TV.
The TV shows your files and folders as they are
organised on your computer.
To browse the files on your computer,
press SOURCES , select Browse network and
press OK.
Menu bar and sorting
With a USB device connected, the TV sorts the files by
type. Navigate to the menu bar and select the type of
file you are looking for.
If you browse files from a computer, you can only
browse the files and folders as they are organized on
the computer.
The menu bar
Navigate to the menu bar and select the type of file
you want to watch or play.
Select Photos , Music or Videos .
Alternatively, you can open the Folders view and
browse your folders to look for a file.
Sorting
To browse your photos by date, month, year or
alphabetically by name, press Sort .
To browse your music by album, artist, genre or
alphabetically by name, press Sort .
Videos are sorted alphabetically.
View photos
To view photos, select Photos in the menu bar,
select a photo thumbnail and press OK.
If there are several photos in the same folder, select a
photo and press Slide show to start a slide show
of all photos in this folder.
To jump to the next or previous photo, press + or
- .
To stop the slide show or close the photo, press
LIST or (Stop).
You can play music with a slide show.
Start the slide show after you started the music.
1 - Select a song or a folder with songs and press OK.
2 - Press LIST and select Photos .
3 - Select a photo or a folder with photos and press
Slide show .
Info
To view info on a photo (size, creation date, file path,
etc.), select a photo and press INFO .
Press again to hide the info.
Options
Press OPTIONS .
• Shuffle
Shows your photos in a random order.
• Repeat
Plays the slide show continuously.
• Slide show speed
Sets the speed of the slide show.
• Slide show transition
Sets the style of the photo transitions.
37
To close Browse USB or Browse network, press
and select another activity.
Play music
To play music, select Music in the menu bar,
select a song and press OK.
If there are more songs in the same folder, press
Play all to play all songs in this folder.
To jump to the next or previous song, press +
or - .
To pause the music, press OK. Press OK again to
continue.
To make a 10-second jump in a song or 10-second
jump back, press or .
To rewind or fast forward, press or . Press the
keys several times to speed up - 1/4x, 1/2x, 2x, 4x, 8x,
16x, 32x.
*1/4x and 1/2x are only available in DLNA.
To stop the music playback, press (Stop).
If you press LIST or , the music keeps on
playing.
Info
To view song info (title, artist, duration, etc.), select
the song and press INFO .
Press again to hide the info.
Options
Press OPTIONS .
• Shuffle
Plays your music randomly.
• Repeat
Plays the song once or continuously.
To close Browse USB or Browse network, press
and select another activity.
Play videos
To play a video, select Videos in the menu bar,
select a video and press OK.
If there are more videos in the same folder,
press Play all to play all videos in this folder.
To jump to the next or previous
video, press + or - .
To pause the video, press OK. Press OK again to
continue.
To make a 10-second jump forward or backward in a
video, press or .
To rewind or go fast forward, press or . Press
the keys several times to speed up - 1/4x, 1/2x, 2x, 4x,
8x, 16x, 32x.
*1/4x and 1/2x are only available in DLNA.
To stop the video playback, press (Stop).
Info
To view info on a video (playhead position, duration,
title, date, etc.), select the video and press INFO .
Press again to hide the info.
Options
Press OPTIONS .
• Subtitles
If available, you can switch subtitles On, Off or On
during mute.
• Shuffle
Plays your videos in a random order.
• Repeat
Plays a video once or continuously.
To close Browse USB or Browse network,
press and select another activity.
13.2
Wi-Fi Miracast
About Wi-Fi Miracast
Your TV is a Wi-Fi Certified Miracast™ device. With
Miracast™, you can watch and share the screen of
your smartphone, tablet or computer on your TV
screen wirelessly. You can stream videos (audio and
video), share photos or anything else that's on screen
of the device. No need to connect the device to your
home network. Both the TV and the device must be
Wi-Fi Certified Miracast™ devices and have Miracast
switched on.
For more information on Wi-Fi Certified Miracast™ go
to www.wi-fi.org
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Wi-Fi
CERTIFIED Miracast™, Miracast™ are trademarks of
the Wi-Fi Alliance.
38
Switch Miracast On or Off
Switch on Miracast
Make sure Wi-Fi Miracast is switched on.
1 - Press and select Setup and press OK.
2 - Select Network settings > Wi-Fi
Miracast > On and press OK.
3 - Press , repeatedly if necessary, to close the
menu.
Switch off Miracast
If you do not want the TV to receive requests for
screen sharing from other devices, you can switch off
Miracast on the TV.
1 - Press and select Setup and press OK.
2 - Select Network settings > Wi-Fi
Miracast > Off and press OK.
3 - Press , repeatedly if necessary, to close the
menu.
Share a screen on TV
To share the screen of your smartphone, tablet or
computer on the TV . . .
1 - Switch on the TV.
2 - On the device, open an application such as Wi-Fi
Miracast, Wi-Fi Direct™, Intel®Wireless Display* or
similar and start scanning for other Miracast devices.
3 - In the list of found devices, select the TV and
connect.
4 - On the TV, agree to the request to connect to the
TV. You might be asked to enter a PIN code from the
device on the TV - enter the numbers with the digit
keys on the remote control. Alternatively, you might
be asked by the TV to enter a PIN code on the device.
If you connect, the TV will show the screen of the
device.
5 - On the device, select the videos, photos or files
you want to watch on TV.
* Miracast is supported by WiFi 3.5 onwards.
Stop sharing
You can stop sharing a screen from the TV or from the
mobile device.
From the device
With the application you use to start Miracast, you
can disconnect and stop watching the screen of the
device on TV. The TV will switch back to the last
selected programme.
From the TV
To stop watching the screen of the device on TV, you
can . . .
• press to watch a TV broadcast
• press to start another activity on TV
• press SOURCES to open the Sources menu and
select a connected device.
Block a device
The first time you receive a request to connect from a
device, you can block the device. This request, and all
requests in the future, from this device, will be
ignored.
To block a device, select Block . . . in the request
window and press OK.
Unblock all devices
All previously connected and blocked devices are
stored in the Wi-Fi Miracast list of connections. If you
clear this list, all blocked devices will be unblocked.
To unblock all blocked devices . . .
1 - Press and select Setup and press OK.
2 - Select Network settings > Reset Miracast group .
3 - Press OK to clear the list.
4 - Press , repeatedly if necessary, to close the
menu.
Blocking a previously connected device
If you want to block a device that you previously
connected, you need to clear the Wi-Fi Miracast
connections list first. If you clear this list, you will have
to confirm or block the connection for every device
again.
Screen delay
The normal delay when sharing a screen with
Miracast is about 1 second. The delay might be longer
if you are using older devices/computers with less
processing power.
Specifics
• Miracast on this TV is subject to the HDCP protocol
and cannot display copy-protected premium content
sent by a device.
• The maximum video resolution supported is 720p.
39
14
Pause TV
You can pause a TV broadcast and resume watching
it later. Only digital TV channels can be paused. You
must connect a USB Hard Drive to buffer the
broadcast. You can pause a broadcast for a maximum
time span of 90 minutes.
For more information, press Keywords and look
up USB Hard Drive.
Pause or resume a broadcast
To pause a broadcast, press (Pause). A progress bar
appears briefly on screen.
To call up the progress bar, press (Pause) again.
To resume watching, press (Play). The icon on
screen indicates you are watching a paused
broadcast.
Back to the actual TV broadcast
To switch back to the actual TV broadcast, press
(Stop).
The moment you switch to a digital channel, the USB
Hard Drive starts buffering the broadcast. When you
switch to another digital channel, the broadcast of the
new channel is buffered and the broadcast of the
former channel is cleared. When you switch to a
connected device (a Blu-ray Disc player or digital
receiver) the USB Hard Drive stops buffering and the
broadcast is cleared. Also when you switch the TV to
standby the broadcast is cleared.
Whilst recording a programme on the USB Hard Drive,
you cannot pause a broadcast.
Instant replay
Whilst watching a broadcast from a digital TV
channel, you can easily instant replay the broadcast.
To replay the last 10 seconds of a broadcast,
press (Pause) and press (Left).
You can press repeatedly until you reach the start
of the broadcast buffer or the maximum time span.
Progress bar
With the progress bar on screen, press (Rewind) or
press (Forward) to select from where you want to
start viewing the paused broadcast. Press these keys
repeatedly to change speed.
Specifics
• The Audio Description audio (commentary) for the
visually impaired is not available for playback in
Pause TV or Recording.
• You can buffer the digital (DVB) subtitles of a
channel. You cannot buffer subtitles that come from
Text services. To check if digital (DVB) subtitles are
available, tune to the TV channel and press
OPTIONS , select Subtitle language to open the list
of Subtitles. You can only buffer a subtitle language
preceded by a DVB icon.
40
15
Recording
15.1
What you need
To record a TV programme you need . . .
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV (the channels
you watch with Watch TV)
• to receive channel information for the built-in TV
guide (from the broadcaster or from the Internet)
For more information, press Keywords and look
up USB Hard Drive, installation.
15.2
Record a programme
Record now
To record the programme you are watching, press
(Record) on the remote control.
If you receive TV guide information from the Internet,
you can adjust the end time of the recording in the
pop-up window before you confirm the recording.
If you receive TV guide information from the
broadcaster, the recording starts immediately. You
can adjust the end time of the recording in the list of
recordings.
To stop recording, press (Stop).
Schedule a recording
You can schedule a recording of an upcoming
programme for today or a few days from today
(maximum of 8 days away).
1 - To schedule a recording, press TV Guide .
On the TV guide page, select the channel and
programme you wish to record.
You can enter the channel number to jump to the
channel in the list.
Press (Right) or (Left) to scroll through the
programmes of a channel.
To change the date of the list, press OPTIONS
and select Change day. In the list, select the day you
want and press OK. If the TV guide comes from the
Internet, you can select the date at the top of the
page and press OK.
2 - With the programme highlighted, press
Record . The TV adds some time buffer at the end of
the programme. You can add some extra buffer if
needed.
3 - Select Schedule and press OK. The programme is
scheduled for recording. A warning will appear / will
be shown automatically when overlapping
recordings are scheduled.
If you plan to record a programme in your absence,
remember to leave the TV switched to standby and
the USB Hard Drive switched on.
List of recordings
To view the list of recordings and scheduled
recordings, press , select Recordings and press
OK.
In this list, you can select a recording to watch,
remove recorded programmes, adjust the end time of
an ongoing recording or check the free disk space.
Also in this list, if the TV guide comes from the
Internet, you can schedule a recording for which you
set the beginning and end time yourself, as a timed
recording not linked to a programme. To set a timed
recording, select Schedule recording at the top of the
page and press OK. Set the channel, date and time
span. To confirm the recording, select Schedule and
press OK.
Remove a scheduled recording
To remove a scheduled recording, select the
upcoming recording in the list and press OK.
Alternatively, you can select the scheduled recording
and press OPTIONS and select Cancel
recording.
Specifics
• While recording a programme, you can watch a
previously recorded programme.
• While recording, you cannot switch TV channels.
• While recording, you cannot pause the TV
broadcast.
• To Record, broadcasters need a reliable clock
setting. If you reset the TV clock manually, recordings
may fail.
• The Audio Description audio (commentary) for the
visually impaired cannot be recorded.
• You can record the digital (DVB) subtitles of channel.
You cannot record subtitles that come from Text
services. To check if digital (DVB) subtitles are
available, tune to the TV channel and
press OPTIONS , select Subtitle language to open
the list of Subtitles. You can only record a subtitle
41
language preceded by a DVB icon.
15.3
Watch a recording
To watch a recording . . .
1 - Press , select Recordings and press OK.
2 - In the list, select the recording and press (Play)
to start the playback. You can use the (Forward),
(Rewind), (Pause) or (Stop) keys on the
remote control.
Expired recording
Broadcasters can limit the number of days a recording
can be viewed. A recording in the list can show the
number of days before it expires.
Failed recording
When a scheduled recording was prevented by the
broadcaster or when the broadcast was interrupted, a
recording is marked as Failed.
Delete a recording
To delete a made recording, select the recording in
the list, press OPTIONS and select Delete
recording.
For more information, press Keywords and look
up Record a programme.
42
16
Smart TV
16.1
About Smart TV
Connect this Philips Smart LED TV to the Internet and
discover a new world of television. You can make a
wired connection to your router or you can link up
wirelessly with Wi-Fi.
With the TV connected to your home network, a
smartphone can show a photo on TV, you can play
videos stored on your computer or control the TV with
your tablet.
With your TV connected to the Internet, you can
watch a rental video from an online video store, read
the online TV guide or record your favourite TV show
on a USB Hard Drive. The Smart TV Apps add to the
fun with all sorts of entertainment and convenient
services.
16.2
What you need
To enjoy Smart TV Apps you must connect the TV to
a router with a high-speed (broadband) connection
to the Internet. You can use a home network
connected to the Internet. You do not need a
computer.
For more information, press Keywords and look
up Network.
Tip
To enter text or to navigate an Internet page more
easily, you can consider to connect a USB keyboard
and a USB mouse to the TV.
For more information, press Keywords and look
up USB keyboard or USB mouse.
16.3
Setup Smart TV
The first time you open Smart TV, you need to
configure your connection. Read and agree to the
terms and conditions to continue. If you do not want
to set up Smart TV, press .
Register
To register with Club Philips . . .
1 - Select Register and press OK.
2 - Enter your email address, select Continue and
press OK.
3 - Confirm the email address.
Parental control
To lock Adult 18+ rated apps . . .
1 - Switch on Smart TV parental control by selecting
Enable and then press OK.
2 - Enter an unlock PIN code of your choice.
3 - Confirm your PIN code.
Adult 18+ rated apps are now locked. To open a
locked app, select the app and press OK. The TV will
ask you to enter your 4-digit code.
16.4
Smart TV Apps
Open Smart TV
The Smart TV start page is your link to the Internet.
You can rent movies online, read newspapers, watch
videos and listen to music, also shop online, open
your social network page (Twitter, . . .) or watch TV
programmes when it suits you with Online TV. To do
this, you open Apps - Internet sites which are tailored
for TV. With your TV connected to the Internet, you
can open Smart TV.
Open Smart TV
To open the Smart TV start page, press Smart TV .
Alternatively, you can press , select Smart TV and
press OK.
The TV connects to the Internet and opens the Smart
TV start page. This may take a few seconds.
Close Smart TV
To close the Smart TV start page, press and select
another activity.
TP Vision Europe B.V. bears no responsibility
regarding the content and the quality of the content
provided by the content service providers.
Smart TV start page
1 - Now on your TV
2 - Your Apps
3 - App gallery
4 - Internet
5 - Recommended Apps
6 - Search
7 - Colour keys for control
Your Apps
You start Apps from the Smart TV start page. If the
start page does not hold any Apps yet, you can add
Apps from the App gallery.
App gallery
In the App gallery you find all available Apps.
43
Internet
The Internet App opens the World Wide Web on your
TV.
On your TV, you can view any Internet website but
most of them are not tailored for a TV screen.
- Some plug-ins (e.g. to view pages or videos) are not
available on your TV.
- Internet pages are shown one page at a time and
full screen.
Recommended Apps
In this window, Philips presents a range of
recommended Apps for your country, Apps for Online
TV or a selection of rental movies from Video stores.
You can select and open them from the
Recommended Apps window.
Search
With Search, you can search the App gallery for
relevant Apps.
Enter a keyword in the text field, select and
press OK to start searching. You can enter names,
titles, genres and description keywords to search.
Alternatively, you can leave the text field empty and
search for the most popular searches/keywords for a
range of categories. In the list of found keywords,
select a keyword and press OK to search for items
with that keyword.
Open an App
To open an App, you must add it to your list of Apps
in the Smart TV start page first.You can add Apps to
your list from the App gallery.
The list of your Apps on the Smart TV start page can
be several pages long. Use the arrow keys to go to the
next or previous page. Alternatively,
press + (Next page) or - (Previous page).
Open an App
To open an App . . .
1 - Press and select Smart TV.
2 - On the start page, select an App icon and press
OK.
In an App, press to go back 1 step or page.
Close an App
To close an App and return to the Smart TV start
page, press Smart TV .
Reload an App page
If an App page did not load properly, press
OPTIONS and select Reload to reload the page.
Zoom
To zoom in on an App page . . .
1 - Press OPTIONS and select Zoom page.
2 - Use the slider bar to set the zoom level.
3 - Return to normal view by resetting the slider bar.
View security info
You can check the security level of an App page.
On an App page, press OPTIONS and select
Security info. If a lock is shown next to the loading
animation on the bottom of the screen while loading
a page, the transfer is secured.
Feedback on an App
Select the App and press Feedback to select a
'like' or 'don't like' button and send a suggestion or
remark to us. You can also report an App malfunction.
Manage your Apps
In the list of Apps on the Smart TV start page you can
. . .
• Remove an App
To remove an App from the list, select the App icon
and press Remove . The App is still available in
the App gallery.
• Move an App
To reposition an App in the list, select the App icon,
press Move and use the arrow keys to reposition
the App. Press OK to confirm the position.
• Lock an App
To lock an App, select the App icon and
press Lock .
When you lock an App, you must enter the 4 digit PIN
code you set for Parental control when you
configured Smart TV. In the list, a locked App is
marked with a lock .
To unlock an App, select the App icon and
press Unlock . You must enter the 4 digit PIN code
to unlock.
App gallery
Open the App gallery in Smart TV to browse the
Apps, the collection of tailored websites for TV.
Find the App for YouTube videos, a national
newspaper, an online photo album, Twitter, etc. There
are Apps to rent a video from an online video store
and Apps for watching programmes you missed. If the
App gallery does not hold what you are looking for,
try the World Wide Web and surf the Internet on TV.
44
Rental video Apps
With the video store Apps in Smart TV, you can rent
your favourite movie from an online rental video
store. You can pay securely with your credit card.
Rent a movie
1 - Open a Video store App in your list of Apps or
select a recommended video on the Smart TV start
page.
2 - Select a movie.
3 - Make the online payment.
4 - Start watching. You can use the (Play) and
(Pause) keys.
Most Video stores ask you to create a login account.
Streaming video
With this TV, you can watch rental movies sent as a
streaming video format. You can almost instantly
watch the movie. You might need a USB Hard Drive to
store some video buffer. If you have a USB Hard
Drive connected, you can also download rental
movies from video stores that offer movie
downloading only. You can pause or restart a
downloaded rental movie. Consult the video store
regarding the rental duration of rental movies.
Internet traffic
Streaming or downloading many videos may exceed
your monthly Internet traffic limit.
Online TV
With the Online TV App on the Smart TV start page*,
you can watch TV programmes you missed or watch
programmes whenever it suits you best.
Open Online TV
To open the Online TV App . . .
1 - Press Smart TV .
2 - On the start page, select the Online TV icon
and press OK.
3 - Select a programme on the page and press OK to
start watching. You can use the (Play) and
(Pause) keys.
List per broadcaster
To view the Online TV programmes ordered by
broadcaster, press All broadcasters .
Select a broadcaster and press OK.
* If available in your region.
16.5
Multi view
While you are on a Smart TV App or the Internet, you
can watch the current TV channel. Multi view opens a
small screen for the TV channel next to the Smart TV
screen.
To open Multi view…
1 - Press SMART TV to open Smart TV.
2 - Press MULTI VIEW to open the small screen.
3 - Press + or – to change the TV channel in
the small screen.
With Multi view open, you cannot use the Remote
Control Pointer nor use a connected USB mouse in
the Smart TV screen.
16.6
Reset Smart TV
To reset your connection with Smart TV, clear the
Internet memory on the TV.
You will clear your Philips Smart TV registration and
parental rating setting, your video store app logins, all
Smart TV app favourites, Internet bookmarks and
history.
To clear the Internet memory . . .
1 - Press and select Setup and press OK.
2 - Select Network settings > Clear Internet
memory and press OK.
45
17
Multi room
17.1
About Multi room
With Multi Room you can watch a TV programme that
comes from another TV in your home. The
programme is streamed from one TV to the other. You
can stream a programme to a TV that has no antenna
connection or has no Smart card subscription of its
own. You can also stream a recorded programme
from a TV with a connected Hard Drive.
The TV that streams the programme to the other TV,
must be switched on and must tune to the channel or
play the recording.
Streaming a TV programme with Multi Room will
reduce the picture resolution to 720p maximum. You
cannot stream radio channels. Some broadcasters
protect their programmes to prevent this kind of
streaming.
17.2
What you need
To stream a TV programme from one TV to another,
the programme must come from a digital TV channel.
Both TVs must be connected to your wireless home
network. For more information,
press Keywords and look up Wireless Network.
Also, both TVs must have a Philips model number
that ends with an 8 or higher - e.g. xxXXXxxx8. It
might be necessary to update the older TV with its
latest software. On the older TV, read the Help
chapter on updating software.
Make sure that both TVs have the setting Switch on
with Wi-Fi (WoWLAN) switched on in the TV setup.
To check this setting on this TV…
1 - Press , select Setup and press OK.
2 - Select Network settings > Switch on with
Wi-Fi and select On, and press OK.
3 - Press BACK repeatedly if necessary, to
close the menu.
17.3
Using Multi room
First time use
When you start Multi room for the first time, switch on
both TVs.
Once this TV made a connection with the other TV,
the other one will appear automatically in the Browse
network menu even when it's in standby.
Stream a TV channel
With Multi room, you can watch the current TV
channel or open the channel list of the other TV. If
you select a channel from the list, the other TV will
also switch to the channel you selected. If the other
TV has a build-in satellite tuner with installed
channels or a connected Hard Disc Drive (HDD) with
recordings*, you can also watch these on this TV. You
cannot switch channels while the other TV is
recording or in Pause TV mode.
To watch a TV channel from the other TV . . .
1 - Make sure the other TV is in standby* or switched
on.
2 - On this TV, press SOURCES , select Browse
network and press OK.
3 - If the TV is not yet connected to your home
network, the network installation will start
automatically. If the TV is already connected, go to
step 4.
4 - In the Browse network menu, select the name of
the other TV and press OK. If you have several TVs in
your home, you might want to change the name of
the other TV. You can do that on the TV itself.
5 - Select what you want to watch from the other TV .
. .
• to watch the current channel of the other TV, select
Current channel and press OK.
• to open the channel list of the other TV, select
Watch TV and press (Right).
• to open the satellite channel list of the other TV,
select Watch satellite and press (Right).
• to open the list of recordings* on the other TV, select
Watch recordings and press (Right).
• you can switch channels with + and - . You
cannot switch channels when the other TV is
recording or in Pause TV mode.
* To switch on the other TV from standby or to watch
its recordings from a connected HDD, both TVs must
have a type number that ends with an 8 or higher -
e.g. xxXXXxxx8 or xxXXXxxx9.
46
TV name
To change the TV name . . .
Press > Setup > Network settings > TV network
name.
47
18
Settings
18.1
Setup menu
Quick picture and sound settings
With Quick picture and sound settings you can set
your basic picture preferences in a few easy steps.
The settings you made are stored under the Picture
style - Personal. You can return to your picture
preference if some settings were changed. You can
set a preferred picture setting for every TV activity or
connected device individually.
To return to your preferred picture setting, while
watching a TV channel, press , select Picture style
and select Personal.
To set a Quick picture setting . . .
1 - Press , select Setup and press OK.
2 - Select Quick picture and sound settings and
press OK. Go through the steps and finish.
For more information, press Keywords and look
up Picture style.
TV settings
In the TV settings menu you can set all settings. The
item General settings in the menu holds a collection
of settings like Menu language, Sleep timer, Switch
off timer, Universal access and more.
For more information, press Keywords and look
up the topic you need.
Search for channels
With Search for channels, you can update your
current channel list and possible newly found
channels are added to the channel list. You can also
do a re-installation of all channels. A channel update
or a channel reinstall may take some time.
Press Keywords and look up Channel, update or
Channels, re-install.
Channel settings
In the Channel settings menu, you can set your
language preferences or set Hearing impaired and
Audio description for people who are hearing and
visually impaired. You can set an age rating to prevent
children from watching a rated programme and set or
change your Child lock code. You can switch on the
Automatic channel update, do a digital reception test
or install analogue channels manually.
Languages
Press Keywords and look up Audio language or
Subtitles.
Universal access
Press Keywords and look up Universal access
for visually and hearing impaired users settings.
Channel installation
Press Keywords and look up Automatic channel
update or Channel update message. Also look up
Manual installation for installing analogue channels
or DVB to switch the antenna connection.
Child lock
Press Keywords and look up Child lock.
Connect to network
Press Keywords and look up Network, wireless or
Network, wired.
Network settings
Press Keywords and look up Network, settings.
Update software
Press Keywords and look up Software, Internet
update or Software, USB update.
Update software
Press Keywords and look up Software, USB
update.
48
Software settings
Press Keywords and look up Software, current
version.
Watch demo
With Demo in menu, you can watch some
demonstration videos of some of the picture quality
features of your TV.
18.2
Picture
Picture style
For easy picture adjustment, you can select a preset
setting with Picture style.
1 - While watching a TV channel, press , then
select Picture style.
2 - Select a style and press OK.
The available Picture styles are . . .
• Personal - Your preferences made in Quick picture
settings
• Vivid - Ideal for daylight viewing
• Natural - Natural picture settings
• Standard - Factory standard settings
• Movie - Ideal for watching movies
• Photo - Ideal for viewing photos
Restore a Style
With a Picture Style selected, you can adjust any
picture setting in Setup > TV settings > Picture…
The selected style will store the changes you made.
We recommend to adjust the picture settings for the
style Personal only.
To restore the style to its original setting…
1 - Press and select Setup, and press OK.
2 - Select TV settings > Picture > Picture style and
select the style you want to reset.
3 - Press Restore Style .
4 - Select Yes and press OK. The style is restored.
5 - Press , repeatedly if necessary, to close the
menu.
For more information on adjusting individual picture
settings, press Keywords and look up Picture.
Home or Shop
If the Picture style is switched back to Vivid every time
you switch on the TV, the TV location is set to Shop. A
setting meant for in-store promotion.
To set the TV for Home use . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Location
and press OK.
3 - Select Home and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Picture settings
Colour
With Colour, you can adjust the colour saturation of
the picture.
To adjust the colour . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Colour.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Contrast
With Contrast, you can adjust the contrast of the
picture.
To adjust the contrast . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Contrast.
3 - Press (right) and adjust the value with (up)
or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Sharpness
With Sharpness, you can adjust the level of sharpness
in fine detail of the picture.
To adjust the sharpness . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Sharpness.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Advanced picture settings
Colour settings
49
Colour enhancement
With Colour enhancement, you can enhance the
colour intensity and the details in bright colours.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Colour
> Colour enhancement.
3 - Press (right) and
select Maximum, Medium, Minimum or Off.
4 - Press , repeatedly if necessary, to close the
menu.
Colour temperature
With Colour temperature, you can set the picture to a
preset colour temperature or select Custom to set a
temperature setting yourself with Custom colour
temperature. Colour temperature and Custom colour
temperature are settings intended for expert users.
To select a preset . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Colour
> Colour temperature.
3 - Press (right) and select Normal, Warm or
Cool. Select Custom if you want to set a colour
temperature yourself.
4 - Press , repeatedly if necessary, to close the
menu.
Custom colour temperature
With Custom colour temperature, you can set a
colour temperature yourself. To set a Custom colour
temperature, first select Custom in the Colour
temperature setting to make the Custom colour
temperature menu available. Custom colour
temperature is a setting intended for expert users.
To set a custom colour temperature . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced > Colour
> Custom colour temperature.
3 - Press (right).
4 - Select a setting with the arrow keys.
5 - Press OK to confirm a setting.
6 - Press , repeatedly if necessary, to close the
menu.
Contrast settings
Contrast modes
With Contrast modes, you can set the level at which
power consumption can be reduced by dimming the
intensity of the screen. Choose for the best power
consumption or for the picture with the best intensity.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced >
Contrast > Contrast modes.
3 - Press (right) and select Best Picture, Best
Power, Standard or Off.
4 - Press , repeatedly if necessary, to close the
menu.
Brightness
With Brightness, you can set the level of brightness of
the picture signal. Brightness is a setting intended for
expert users. We recommend non-expert users to
adjust the brightness of the picture with the Contrast
setting.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced >
Contrast > Brightness.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Video contrast
With Video contrast, you can decrease the range of
the video contrast.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced >
Contrast > Video contrast.
3 - Press (right) and adjust the value with
(up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Gamma
With Gamma, you can set a non-linear setting for
picture luminance and contrast. Gamma is a setting
intended for expert users.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced >
Contrast > Gamma.
50
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Sharpness settings
Super resolution
With Super resolution, you switch on a superior
sharpness in line edges and contours.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture >
Advanced > Sharpness > Super resolution.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the
menu.
Noise reduction
With Noise reduction, you can filter out and reduce
the level of image noise.
To adjust the noise reduction . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced >
Sharpness > Noise reduction.
3 - Press (right) and select Maximum, Medium,
Minimum or Off.
4 - Press , repeatedly if necessary, to close the
menu.
MPEG artefact reduction
With MPEG artefact reduction, you can smoothen the
digital transitions in the picture. MPEG artefacts are
mostly visible as small blocks or jagged edges in
images.
To reduce the MPEG artefacts . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced >
Sharpness > MPEG artefact reduction.
3 - Press (right) and
select Maximum, Medium, Minimum or Off.
4 - Press , repeatedly if necessary, to close the
menu.
Game or computer
You can switch the TV to the ideal picture setting for
gaming or for using the TV as a computer monitor.
There is a different setting for Game or Computer. If a
device has a correct type set in the Source menu -
Game console or Computer - the TV switches
automatically to the ideal setting when you switch to
the device. If you switch the setting manually, do not
forget to switch it off when you switch to watching TV
or another connected device.
To switch the setting manually . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Picture > Advanced
> Activity style.
3 - Select Game, Computer or TV. The setting TV
returns to the picture settings for watching TV.
4 - Press , repeatedly if necessary, to close the
menu.
Location
If the TV is located in a shop, you can set the TV to
display an in store promotion banner. The Picture
style is set to Vivid automatically. The automatic
Switch off timer is switched off.
To set the TV to Shop location . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Location
and press OK.
3 - Select Shop and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
18.3
Sound
Sound style
For easy sound adjustment, you can select a preset
setting with Sound style.
1 - While watching a TV channel, press , then select
Sound style.
2 - Select a style and press OK.
The different Sound styles are . . .
• Personal - Your personal choices made in
Personalise sound
• Original - Factory standard
• Movie - Ideal for watching movies
• Music - Ideal for listening to music
• Game - Ideal for gaming
• News - Ideal for speech
51
Restore a Sound style
With a Sound style selected, you can adjust any
sound setting in Setup > TV settings > Sound…
The selected style will store the changes you made.
We recommend to adjust the sound settings for the
style Personal only
To restore the style to its original setting…
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Sound style and
select the style you want to reset.
3 - Press Restore Style .
4 - Select Yes and press OK. The style is restored.
5 - Press BACK repeatedly if necessary, to close
the menu.
Press Keywords and look up Sound for adjusting
individual sound settings.
Sound settings
Bass
With Bass, you can adjust the level of low tones in the
sound.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Bass.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Treble
With Treble, you can adjust the level of high tones in
the sound.
To adjust the level . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Treble.
3 - Press (right) and adjust the value
with (up) or (down).
4 - Press , repeatedly if necessary, to close the
menu.
Surround mode
With Surround mode, you can set the sound effect of
the TV speakers.
To set the surround mode . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Surround mode.
3 - Press (right) and select Stereo, Incredible
surround.
4 - Press , repeatedly if necessary, to close the
menu.
Headphones volume
With Headphones volume, you can set the volume of
a connected headphones separately.
To adjust the volume . . .
1 - Press and select Headphones volume in the
menu bar.
2 - Press (up) or (down) to adjust the volume.
3 - Press , repeatedly if necessary, to close the
menu.
Advanced sound settings
Auto volume levelling
With Auto volume levelling, you can set the TV to
automatically level out sudden volume differences.
Typically at the beginning of adverts or when you are
switching channels.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Auto
volume leveling.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the
menu.
TV speakers
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
With TV speakers, you select where you want to hear
the TV sound and how you want to control it.
• If you select Off, you permanently switch off the TV
speakers.
• If you select TV speakers, the TV speakers are
always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to
the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
• If you select EasyLink autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink autostart selected, you
can still switch to TV speakers or device speakers in
sound menu.
To set the TV speakers . . .
1 - Press and select Setup and press OK.
52
2 - Select TV settings > Sound > Sound output.
3 - Press (right) and select Off, TV speakers,
EasyLink or EasyLink autostart.
4 - Press , repeatedly if necessary, to close the
menu.
To switch speakers directly . . .
1 - While watching TV, press OPTIONS and select
Picture and sound.
2 - Select Speakers and select TV or Amplifier (audio
device).
3 - Press , repeatedly if necessary, to close the
menu.
Clear sound
With Clear Sound, you improve the sound for speech.
Ideal for news programmes. You can switch the
speech improvement on or off.
To switch on or off . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Advanced > Clear
Sound.
3 - Press (right) and select On or Off.
4 - Press , repeatedly if necessary, to close the
menu.
HDMI ARC
If you do not need an Audio Return Channel (ARC) on
any of the HDMI connections, you can switch the ARC
signal off.
For more information, press Keywords and look
up HDMI ARC.
Audio out format
With Audio out format you can set the audio out
signal of the TV to fit the sound processing
capabilities of your Home Theatre System.
For more information, press Keywords and look
up Audio Out format.
Audio out levelling
With Audio out leveling you can level the sound
volume of the Home Theatre System with the volume
of the TV when you switch over from one to another.
For more information, press Keywords and look
up Audio Out leveling.
Audio out delay
If you set an Audio sync delay on your Home Theatre
System, to synchronise the sound with the picture,
you must switch off Audio out delay on the TV.
For more information, press Keywords and look
up Audio Out delay.
Audio out offset
If you cannot set a delay on the Home Theatre
System, you can set a delay on the TV with Audio out
offset.
For more information, press Keywords and look
up Audio Out offset.
Speakers
Home Theatre System
You can send the TV sound to a connected audio
device - a Home Theatre System or audio system.
You can select where you want to hear the TV sound
and how you want to control it.
• If you select Off, you permanently switch off the TV
speakers.
• If you select TV speakers, the TV speakers are
always on.
With an audio device connected with HDMI CEC, you
can use one of the EasyLink settings.
• If you select EasyLink, the TV sends the TV sound to
the audio device. The TV will switch off the TV
speakers when the device is playing the sound.
• If you select EasyLink autostart, the TV will switch
on the audio device, send the TV sound to the device
and switch off the TV speakers.
With EasyLink or EasyLink autostart selected, you can
still switch to TV speakers if necessary.
To set the TV speakers . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > Sound > Sound output.
3 - Press (right) and select Off, TV speakers,
EasyLink or EasyLink autostart.
4 - Press , repeatedly if necessary, to close the
menu.
To switch to speakers directly . . .
1 - While watching TV, press .
2 - Select Speakers and select TV or Amplifier
(audio system).
3 - Press , repeatedly if necessary, to close the
menu.
53
TV placement
As part of the first installation, this setting is set to
either On a TV stand or Wall mounted. If you have
changed the placement of the TV since then, adjust
this setting accordingly for best sound reproduction.
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > TV
placement and press OK.
3 - Select On a TV stand or Wall mounted and press
OK.
4 - Press , repeatedly if necessary, to close the
menu.
18.4
Universal access
Switch on
With Universal access switched on, the TV is set for
use for hearing and visually impaired people.
Switch on
If you did not switch on Universal access during the
installation, you can still switch it on in Setup.
To switch on Universal access . . .
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Universal
access and press OK.
3 - Select On and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
With Universal access switched on in Setup, the
Universal access option is added in the Options
menu.
Hearing impaired
Switch on
Some digital TV channels broadcast special audio and
subtitles adapted for hearing impaired people.
With Hearing impaired switched on, the TV
automatically switches to the adapted audio and
subtitles, if available. Before you can switch
on Hearing impaired, you have to switch
on Universal access.
Switch on
To switch on Hearing impaired . . .
1 - Press OPTIONS , select Universal
access and press OK.
2 - Select Hearing impaired, select On and
press OK.
To check whether a hearing impaired audio language
is available, press OPTIONS , select Audio
language and look for an audio language marked
with a .
If Universal access does not appear in the Options
menu, switch on Universal access in Setup.
For more information, press Keywords and look
up Universal access.
Audio description
Switch on
Digital TV channels can broadcast special audio
commentary describing what is happening on
screen.
To be able to set the visually impaired audio and
effects, you have to switch on Audio
description first.
Also, before you can switch on Audio description,
you have to switch on Universal access.
Audio description
With Audio description, a narrator's commentary is
added to the normal audio.
To switch on the commentary (if available) . . .
1 - With Universal access switched on,
press OPTIONS and select Universal access.
2 - Select Audio description and press OK.
3 - Select On and press OK.
You can check if an audio commentary is available.
In the Options menu, select Audio language and
look for an audio language marked with a .
Speakers / Headphones
With Speakers / Headphones, you can select where
you want to hear the audio commentary.
On the TV speakers only, on the headphones only or
on both.
To set Speakers / Headphones . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Languages > Audio
description > Speakers / Headphones and
press OK.
3 - Select Speakers, Headphones or Speakers +
headphones and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
54
Mixed volume
You can mix the volume of the normal audio with the
audio commentary.
To mix the volume . . .
1 - Press OPTIONS and select Universal
access in the menu bar.
2 - Select Mixed volume and press OK.
3 - Use or to set the slider bar.
4 - Press OK to confirm.
Audio effect
The audio commentary can also hold subtitles for the
words which are spoken.
To switch on these subtitles (if available) . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Languages > Audio
description > Speech and press OK.
3 - Select Descriptive (audio) or Subtitles and press
OK.
4 - Press , repeatedly if necessary, to close the
menu.
Speech
The audio commentary can also hold subtitles for the
words which are spoken.
To switch on these subtitles (if available) . . .
1 - Press and select Setup and press OK.
2 - Select Channel settings > Languages > Audio
description > Speech and press OK.
3 - Select Descriptive (audio) or Subtitles and press
OK.
4 - Press , repeatedly if necessary, to close the
menu.
Key beep
Key beep gives an audio feedback each time you
press a key on the remote control. The volume of the
beep is fixed.
To switch on Key beep . . .
1 - Press OPTIONS , select Universal access and
press OK.
2 - Select Key beep and select On.
If Universal access does not appear in the Options
menu, switch on Universal access in Setup.
For more information, press Keywords and look
up Universal access.
55
19
Specifications
19.1
Environmental
Saving energy
The Eco settings bundle the settings that help the
environment.
While you are watching TV channels, press icon,
then select Eco settings, press OK.
Active settings are marked with a . You can mark
or unmark each setting with the OK key.
Press again to close Eco settings .
Energy saving
This Picture style sets the picture, in the most ideal
energy conscious setting.
For more information, press Keywords and look
up Picture style.
Screen off
If you only listen to music, you can switch off the TV
screen to save energy.
Select Screen off and press OK. To switch the
screen back on, press any key on the remote control.
(Except key)
Light sensor*
To save energy, the built-in ambient light sensor
lowers the brightness of the TV screen when the
surrounding light darkens. The built-in light sensor
automatically adjusts the picture, to the lighting
conditions of the room.
* Only for TVs with light sensor
Switch off timer
If you do not press a key on the remote control during
a 4 hour period, or if the TV receives no signal for 10
minutes, the TV switches off automatically to save
energy.
If you use the TV as a monitor or use a digital receiver
to watch TV (a Set-top box - STB) and you do not use
the remote control of the TV, deactivate the
automatic switch off.
In addition to the Eco settings, your TV also has
environmentally friendly technology with regard to
power consumption.
Inactive devices off
Switch off connected EasyLink HDMI-CEC (Consumer
Electronic Control) compliant devices that are
inactive.
European energy label
The European Energy Label informs you on the
energy efficiency class of this product. The greener
the energy efficiency class of this product is, the
lower the energy it consumes.
On the label, you can find the energy efficiency class,
the average power consumption of this product in use
and the average energy consumption for 1 year. You
can also find the power consumption values for this
product on the Philips website for your country at
www.philips.com/TV
End of use
Disposal of your old product and batteries
Your product is designed and manufactured with high
quality materials and components, which can be
recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product is
covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. Correct disposal of your old
product helps to prevent potential negative
consequences for the environment and human
health.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot be
disposed with normal household waste.
Please find out for yourself about the local rules on
separate collection of batteries because correct
disposal will help to prevent negative consequences
for the environment and human health.
56
19.2
Reception
• Aerial input : 75 ohm coaxial (IEC75)
• Tuner bands : Hyperband; S-Channel; UHF; VHF
• DVB :
- For model name with PxH: DVB-T (terrestrial,
antenna) COFDM 2K/8K; DVB-C (cable) QAM
- For model name with PxT: DVB-T2; DVB-C (cable)
QAM
• Analogue video playback : NTSC; SECAM; PAL
• Digital video playback : MPEG2 SD/HD (ISO/IEC
13818-2); MPEG4 SD/HD (ISO/IEC 14496-10)
• Digital audio playback (ISO/IEC 13818-3)
Note: See selected countries on the TV type plate
19.3
Display
Type
• Diagonal screen size :
- 102 cm / 40 inch
• Display resolution :
- PFxxxx9 : 1920x1080p
- PHxxxx9 : 1366x768p
Input resolution for HD/FHD TVs
Video formats
Resolution — Refresh rate
• 480i - 60 Hz
• 480p - 60 Hz
• 576i - 50 Hz
• 576p - 50 Hz
• 720p - 50 Hz, 60 Hz
• 1080i - 50 Hz, 60 Hz
• 1080p - 24 Hz, 25 Hz, 30 Hz, 50 Hz, 60 Hz
Computer formats
Resolutions (amongst others)
• 640 x 480p - 60 Hz
• 800 x 600p - 60 Hz
• 1024 x 768p - 60 Hz
• 1280 x 768p - 60 Hz
• 1360 x 765p - 60 Hz
• 1360 x 768p - 60 Hz
• 1280 x 1024p - 60 Hz
• 1920 x 1080p - 60 Hz
19.4
Power
Product specifications are subject to change without
notice. For more specification details of this product,
see www.philips.com/support
Power
• Mains power : AC 220-240V +/-10%
• Ambient temperature : 5°C to 35°C
• Standby power consumption : < 0.3W
• Power saving features : Energy saving, Screen off,
Light sensor, Switch off timer, Inactive devices off.
The power rating stated on the product typeplate is
the power consumption for this product during
normal household use (IEC 62087 Ed.2). The
maximum power rating, stated between brackets, is
used for electrical safety (IEC 60065 Ed. 7.2).
19.5
Dimensions and weights
40PFT5300
• without TV stand:
Width 903.5 mm - Height 523.1 mm - Depth 88.1 mm
- Weight ±7.82 kg
• with TV stand:
Width 903.5 mm - Height 576.7 mm - Depth 222.1
mm - Weight ±9.72 kg
19.6
Connectivity
TV Rear
• Audio In (DVI to HDMI): Stereo mini-jack 3.5mm
• CVBS: Audio L/R, CVBS in, RGB
• SCART: Audio L/R, CVBS in, RGB
• YPbPr : Y Pb Pr, Audio L/R : Stereo mini-jack 3.5mm
• Digital Audio out: Optical, Toslink
• Network LAN : RJ45
57
• HDMI in with ARC
TV Side
• HDMI in with ARC
• USB 2.0
• Common interface slot: CI+/CAM
• Headphones: Stereo mini-jack 3.5mm
19.7
Multimedia
Connections
• USB 2.0
• Ethernet LAN RJ-45
• Wi-Fi 802.11b/g/n (built-in)
Supported USB file systems
• FAT 16, FAT 32, NTFS
Playback formats
• Containers : 3GP, AVCHD, AVI, MPEG-PS, MPEG-TS,
MPEG-4, Matroska (MKV), Quicktime (MOV, M4V,
M4A), Windows Media (ASF/WMV/WMA)
• Video Codecs : MPEG-1, MPEG-2, MPEG-4 Part 2,
MPEG-4 Part 10 AVC (H264), VC-1, WMV9
• Audio Codecs : AAC, HE-AAC (v1/v2), AMR-NB,
Dolby Digital, Dolby Digital Plus, DTS 2.0 + Digital
Out™, MPEG-1/2/2.5 Layer I/II/III (includes MP3),
WMA (v2 to v9.2), WMA Pro (v9/v10)
• Subtitles :
– Formats : SAMI, SubRip (SRT), SubViewer (SUB),
MicroDVD (TXT), mplayer2 (TXT), TMPlayer (TXT)
– Character encodings : UTF-8, Central Europe and
Eastern Europe (Windows-1250), Cyrillic
(Windows-1251), Greek (Windows-1253), Turkish
(Windows-1254), Western Europe (Windows-1252)
• Image Codecs : JPEG
• Limitations :
– Maximum supported total bit rate for a media file is
30Mbps.
– Maximum supported video bit rate for a media file
is 20Mbps.
– MPEG-4 AVC (H.264) is supported up to High
Profile @ L4.1.
– VC-1 is supported up to Advanced Profile @ L3.
Wi-Fi Certified Miracast™
This TV supports WiDi 4.x devices.
Supported media server software (DMS)
• PC - Microsoft Windows XP, Vista or Windows 7
– You can use any DLNA certified® media server
software.
– Microsoft - Windows Media Player
• Mac OS X
– You can use any DLNA certified® media server
software.
• Mobile devices
– Philips TV Apps - iOS, Android
– Interoperability and performance may vary,
depending on the capabilities of the mobile device
and the software used.
ESD regulations
This apparatus meets performance criteria A for ESD.
In case the apparatus does not recover in file sharing
mode due to electrostatic discharge, user interference
is required.
58
20
Software
20.1
Software update
Update from USB
It might be necessary to update the TV software. You
need a computer with an high-speed Internet
connection and a USB memory device to upload the
software on the TV. Use a USB memory device with
256MB free space. Make sure that write protection is
switched off.
1 - Start the update on TV
Press , select Setup and press OK.
Select Update software > USB and press OK.
2 - Identify the TV
Insert the USB memory into one of the USB
connections of the TV.
Select Start and press OK. An identification file is
written on the USB memory device.
3 - Download the TV software
Insert the USB memory into your computer.
On the USB memory device, locate the
file update.htm and double click it.
Click on Send ID.
If new software is available, download the .zip file.
After the download, unzip the file and copy the
file autorun.upg onto the USB memory device.
Do not place this file in a folder.
4 - Update the TV software
Insert the USB memory into the TV again. The update
starts automatically.
The TV switches itself off for 10 seconds and then
back on again. Please wait.
Do not . . .
• use the remote control
• remove the USB memory device from the TV
If a power cut occurs during the update, never
remove the USB memory device from the TV. When
the power returns, the update will continue.
At the end of the update, the message Operation
successful appears on screen. Remove the USB
memory device and press on the remote control.
Do not . . .
• press twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then
back on again. Please wait.
The TV software has been updated. You can use the
TV again.
To prevent an accidental update of the TV software,
delete the autorun.upg file from the USB memory
device.
Update from Internet
If the TV is connected to the Internet, you may receive
a message from TP Vision to update the TV software.
You need a high-speed (broadband) Internet
connection.
If you receive this message, we recommend you carry
out the update.
Select Update. Follow the instructions on screen.
You can also look for new updates yourself.
To look for an update . . .
1 - Press and select Setup and press OK.
2 - Select Update software > TV with Internet, then
press OK. Follow the instructions on screen.
When the update is complete, the TV switches off and
back on again automatically.
Wait for the TV to switch itself back on.
20.2
Software version
To view the current TV software version . . .
1 - Press and select Setup and press OK.
2 - Select Software settings and press OK.
3 - Select Current software info and
see Release Version .
4 - Press , repeatedly if necessary, to close the
menu.
20.3
Open source software
This television contains open source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
offer is requested by the respective licences.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to .
. .
Intellectual Property Dept.
TP Vision Europe B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
59
20.4
Open source license
Acknowledgements and License Texts for any open
source software used in this Philips TV.
This is a document describing the distribution of the
source code used on the Philips TV, which fall either
under the GNU General Public License (the GPL), or
the GNU Lesser General Public License (the LGPL), or
any other open source license. Instructions to obtain
source code for this software can be found in the user
manual.
PHILIPS MAKES NO WARRANTIES WHATSOEVER,
EITHER EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, REGARDING THIS
SOFTWARE. Philips offers no support for this
software. The preceding does not affect your
warranties and statutory rights regarding any Philips
product(s) you purchased. It only applies to this
source code made available to you.
Freetype (2.4.3)
FreeType is a software font engine that is designed to
be small, efficient, highly customizable, and portable
while capable of producing high-quality output
(glyph images).
This piece of software is made available under the
terms and conditions of the FreeType Project license,
which can be found below.
Source: http://freetype.sourceforge.net
zlib (1.2.3)
The 'zlib' compression library provides in-memory
compression and decompression functions, including
integrity checks of the uncompressed data.
This piece of software is made available under the
terms and conditions of the zlib license, which can be
found below.
Source: http://www.zlib.net/
Fraunhofer AAC Ecnoder (3.3.3)
AAC Ecnoder.
Source: Android JB source code
unicode (3.2)
This library is used to perform UNICODE string
manipulation.
This piece of software is made available under the
terms and conditions of the ICU license, which can be
found below.
Source: http://www.icu-project.org/
libpng (1.2.43)
PNG decoder.
This piece of software is made available under the
terms and conditions of the libpng license, which can
be found below.
Source: http://www.libpng.org/pub/png/libpng.html
libjpg (6b)
This library is used to perform JPEG decoding tasks.
This piece of software is made available under the
terms and conditions of the libjpg license, which can
be found below.
Source: http://www.ijg.org/
libmng (1.0.10)
libmng -THE reference library for reading, displaying,
writing and examining Multiple-Image Network
Graphics.MNG is the animation extension to the
popular PNG image-format.
This piece of software is made available under the
terms and conditions of the libmng license, which can
be found below.
Source:
http://sourceforge.net/projects/libmng/files/
u-Boot loader (1.3.4)
Used by boot loader and only linked with boot
loader, GPL license.
This piece of software is made available under the
terms and conditions of the u-Boot loader license,
which can be found below.
Source: http://sourceforge.net/projects/u-boot/files/
u-boot/U-Boot-1.1.4/u-boot-1.1.4.tar.bz2/download
Libcurl (7.21.7)
HTTP client;libcurl is a free and easy-to-use client-
side URL transfer library, supporting FTP, FTPS, HTTP,
HTTPS, SCP, SFTP, TFTP, TELNET, DICT, LDAP,
LDAPS, FILE, IMAP, SMTP, POP3 and RTSP. libcurl
supports SSL certificates, HTTP POST, HTTP PUT, FTP
uploading, HTTP form based upload, proxies, cookies,
user+password authentication (Basic, Digest, NTLM,
Negotiate, Kerberos4), file transfer resume, http proxy
tunneling and more!
This piece of software is made available under the
terms and conditions of the Libcurl license, which can
be found below.
Source: http://curl.haxx.se/
c-ares (1.7.4)
c-ares is a C library that performs DNS requests and
name resolves asynchronously.
This piece of software is made available under the
terms and conditions of the c-ares license, which can
be found below.
Source: http://c-ares.haxx.se/c-ares-1.7.1.tar.gz
openssl (1.0.0d)
OpenSSL is an open source implementation of the
SSL and TLS protocols. The core library (written in the
C programming language) implements the basic
cryptographic functions and provides various utility
functions. Wrappers allowing the use of the OpenSSL
library in a variety of computer languages are
60
available.
This piece of software is made available under the
terms and conditions of the 1.7.4 license, which can be
found below.
Source:
http://www.openssl.org/source/openssl-1.0.0.tar.gz
Expat (2.01)
xml paser; Expat is an XML parser library written in C.
It is a stream-oriented parser in which an application
registers handlers for things the parser might find in
the XML document (like start tags). An introductory
article on using.
This piece of software is made available under the
terms and conditions of the Expat license, which can
be found below.
Source: http://expat.sourceforge.net/
DirectFB include SAWMAN (1.4.0)
It is a software library for GNU/Linux/UNIX based
operating system with a small memory footprint that
provides graphics acceleration, input device handling
and abstraction layer, and integrated windowing
system with support for translucent windows and
multiple display layers on top of the Linux
framebuffer without requiring any kernel
modifications.
This piece of software is made available under the
terms and conditions of the DirectFB license, which
can be found below.
Source: http://sourceforge.net/projects/jointspace/fil
es/remote_applications_SDK/remote_spplications_S
DK_v1.3.1/DirectFB141_source_1.3.1.7z/download
SAWMAN
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
Source: http://squashfs.sourceforge.net/
Linux Kernel (3.0)
The Linux kernel is an operating system kernel used
by the Linux family of Unix-like operating systems.
This piece of software is made available under the
terms and conditions of the Linux Kernel license,
which can be found below.
Source: http://www.kernel.org
SQLite (3.7.2)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
This piece of software is made available under the
terms and conditions of the SQLite license, which can
be found below.
Source: http://www.sqlite.org/download.html
SquashFS (3.4)
SquashFS is a compressed read-only file system for
Linux. SquashFS compresses files, inodes and
directories, and supports block sizes up to 1 MB for
greater compression. SquashFS is also the name of
free/open software, licensed under the GPL, for
accessing SquashFS filesystems.
This piece of software is made available under the
terms and conditions of the SquashFS license, which
can be found below.
Source: http://squashfs.sourceforge.net/
glibc (2.6.1)
Any Unix-like operating system needs a C library: the
library which defines the ``system calls'' and other
basic facilities such as open, malloc, printf, exit...The
GNU C library is used as the C library in the GNU
system and most systems with the Linux kernel
This piece of software is made available under the
terms and conditions of the glibc license, which can
be found below.
Source: http://www.gnu.org/software/libc/
mtd-utils (1)
The aim of the system is to make it simple to provide
a driver for new hardware, by providing a generic
interface between the hardware drivers and the upper
layers of the system. Hardware drivers need to know
nothing about the storage formats used, such as FTL,
FFS2, etc., but will only need to provide simple
routines for read, write and erase. Presentation of the
device's contents to the user in an appropriate form
will be handled by the upper layers of the system.
This piece of software is made available under the
terms and conditions of the mtd-utils license, which
can be found below.
Source: http://www.linux-
mtd.infradead.org/index.html
libusb (1.0.6)
This is the home of libusb, a library that gives user
level applications uniform access to USB devices
across many different operating systems. libusb is an
open source project licensed under the GNU Lesser
General Public License version 2.1.Many participants
in the libusb community have helped and continue to
help with ideas, implementation, support and
improvements for libusb.
This piece of software is made available under the
terms and conditions of the libusb license, which can
be found below.
Source:
http://libusb.wiki.sourceforge.net
http://www.libusb.org/
libusb-compat (0.1.3)
Library to enable user space application programs to
communicate with USB devices.
This piece of software is made available under the
terms and conditions of the libusb-compat license,
61
which can be found below.
Source:
http://libusb.wiki.sourceforge.net/LibusbCompat0.1
NTFS-3G Read/Write Driver (2010.5.22)
NTFS-3G is an open source cross-platform
implementation of the Microsoft Windows NTFS file
system with read-write support. NTFS-3G often uses
the FUSE file system interface, so it can run
unmodified on many different operating systems. It is
runnable on Linux, FreeBSD, NetBSD, OpenSolaris,
BeOS, QNX, WinCE, Nucleus, VxWorks,
Haiku,MorphOS, and Mac OS X It is licensed under
either the GNU General Public License or a
proprietary license. It is a partial fork of ntfsprogs and
is under active maintenance and development.
This piece of software is made available under the
terms and conditions of the NTFS-3G Read/Write
Driver license, which can be found below.
Source: http://www.tuxera.com
WPA Supplicant (0.5.10 & 0.6.7)
These packages are used to provide WiFi access.The
supplier for these tools is Atheros.These pieces of
software are made available under the terms and
conditions of the GPL v2 license, which can be found
below.
This piece of software is made available under the
terms and conditions of the WPA Supplicant license,
which can be found below.
Source: http://hostap.epitest.fi/wpa_supplicant/
ntfsprogs (2.0.0)
Some useful tool for ntfs file sytem.
This piece of software is made available under the
terms and conditions of the ntfsprogs license, which
can be found below.
Source: http://sourceforge.net/projects/linux-ntfs
fuse (2.8.4)
Fuse is a simple interface for userspace programs to
export a virtual filesystem to the linux kernel.
This piece of software is made available under the
terms and conditions of the fuse license, which can
be found below.
Source: http://fuse.sourceforge.net/
libiconv (1.11.1)
This library provides an iconv() implementation, for
use on systems which don't have one, or whose
implementation cannot convert from/to Unicode. .
This piece of software is made available under the
terms and conditions of the libiconv license, which
can be found below.
Source: http://ftp.gnu.org/pub/gnu/libiconv
electric-fence (2.1.13)
Used for memory corruption detection.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: http://perens.com/FreeSoftware/ElectricFenc
e/electric-fence_2.1.13-0.1.tar.gz
liveMedia
When Wifi Display or streaming RtspPlayer are
enabled.
This piece of software is made available under the
terms and conditions of the electric-fence license,
which can be found below.
Source: www.live555.com
QT (4.7.0)
Netflix skpe besttv pandora picasa? will use QT.
This piece of software is made available under the
terms and conditions of the QT license, which can be
found below.
Source: http://qt.nokia.com/
e2fsprogs (1.41.14)
e2fsprogs provides the filesystem utilities for use with
the ext2 filesystem, it also supports the ext3 and ext4
filesystems.
This piece of software is made available under the
terms and conditions of the e2fsprogs license, which
can be found below.
Source: http://e2fsprogs.sourceforge.net/
alsa (1.0.24.1)
Advanced Linux Sound Architecture (ALSA).
This piece of software is made available under the
terms and conditions of the alsa license, which can be
found below.
Source: http://www.alsa-project.org
lvm2 (2.02.89)
DM_VERITY.
This piece of software is made available under the
terms and conditions of the lvm2 license, which can
be found below.
Source:
ftp://sources.redhat.com/pub/lvm2/releases/
encfs (1.3.2)
A library provides an encrypted filesystem in user-
space.
Source: http://www.arg0.net/encfs
boost (1.15.0)
A library provides free peer-reviewed portable C++
source libraries is used for encfs.
Source: http://www.boost.org
rlog (1.4)
A library that provides a flexible message logging
facility for C programs and libraries is used for encfs.
Source: http://www.arg0.net/rlog
iptables (1.4.15)
For Cross connection.
62
Source: http://www.netfilter.org/projects/iptables/
bash (3.2.48)
Bash is the shell, or command language interpreter,
that will appear in the GNU operating system.
Bash is an sh-compatible shell that incorporates
useful features from the Korn shell (ksh) and C shell
(csh).
It is intended to conform to the IEEE POSIX
P1003.2/ISO 9945.2 Shell and Tools standard.
It offers functional improvements over sh for both
programming and interactive use.
In addition, most sh scripts can be run by Bash
without modification.
Source: http://www.gnu.org/software/bash/
coreutils (6.9)
The GNU Core Utilities are the basic file, shell and text
manipulation utilities of the GNU operating system.
These are the core utilities which are expected to
exist on every operating system.
Source: http://www.gnu.org/software/coreutils/
findutils (4.2.31)
The GNU Find Utilities are the basic directory
searching utilities of the GNU operating system.
These programs are typically used in conjunction with
other programs to provide modular and powerful
directory search and file locating capabilities to other
commands.
Source: http://www.gnu.org/software/findutils/
gawk (3.1.5)
If you are like many computer users, you would
frequently like to make changes in various text files
wherever certain patterns appear, or extract data from
parts of certain lines while discarding the rest.
To write a program to do this in a language such as C
or Pascal is a time-consuming inconvenience that
may take many lines of code.
The job is easy with awk, especially the GNU
implementation: gawk.
Source: http://www.gnu.org/software/gawk/
grep (2.5.1a)
The grep command searches one or more input files
for lines containing a match to a specified pattern. By
default, grep prints the matching lines.
Source: http://www.gnu.org/software/grep/
gzip (1.3.12)
GNU Gzip is a popular data compression program
originally written by Jean-loup Gailly for the GNU
project. Mark Adler wrote the decompression part.
Source: http://www.gnu.org/software/gzip/
inetutils (1.4.2)
Inetutils is a collection of common network
programs.
Source: http://www.gnu.org/software/inetutils/
iputils (s20101006)
The iputils package is set of small useful utilities for
Linux networking. It was originally maintained by
Alexey Kuznetsov.
Source: http://www.skbuff.net/iputils/
module-init-tools (3.12)
Provides developer documentation for the utilities
used by Linux systems to load and manage kernel
modules (commonly referred to as "drivers").
Source: https://modules.wiki.kernel.org/index.php/M
ain_Page
ncurses (5.7)
The Ncurses (new curses) library is a free software
emulation of curses in System V Release 4.0, and
more.
It uses Terminfo format, supports pads and color and
multiple highlights and forms characters and function-
key mapping, and has all the other SYSV-curses
enhancements over BSD Curses.
Source: http://www.gnu.org/software/ncurses/
net-tools (1.6)
The Net-tools?package is a collection of programs for
controlling the network subsystem of the Linux
kernel.
Source: http://www.linuxfromscratch.org/blfs/view/6.
3/basicnet/net-tools.html
procps (ps, top) (3.2.8)
procps is the package that has a bunch of small
useful utilities that give information about processes
using the /proc filesystem.
The package includes the programs ps, top, vmstat, w,
kill, free, slabtop, and skill.
Source: http://procps.sourceforge.net/index.html
psmisc (22.13)
This PSmisc package is a set of some small useful
utilities that use the proc filesystem. We're not about
changing the world, but providing the system
administrator with some help in common tasks.
Source: http://psmisc.sourceforge.net/
sed (4.1.5)
sed (stream editor) isn't an interactive text editor.
Instead, it is used to filter text, i.e., it takes text input,
performs some operation (or set of operations) on it,
and outputs the modified text.
sed is typically used for extracting part of a file using
pattern matching or substituting multiple occurrences
of a string within a file.
Source: http://www.gnu.org/software/sed/
tar (1.17)
GNU Tar provides the ability to create tar archives, as
well as various other kinds of manipulation.
For example, you can use Tar on previously created
archives to extract files, to store additional files, or to
63
update or list files which were already stored.
Source: http://www.gnu.org/software/tar/
util-linux-ng (2.18)
Various system utilities.
Source: http://userweb.kernel.org/~kzak/util-linux-
ng/
udhcpc (0.9.8cvs20050303-3)
Udhcpc is a very small?DHCP?client geared
towards?embedded systems.
Source: http://udhcp.sourcearchive.com/downloads/
0.9.8cvs20050303-3/
Libxml2 (2.7.8)
The "libxml2" library is used in AstroTV as a support
for the execution of NCL application. This library was
developed for the GNOME software suite and is
available under a "MIT" license.
Source: http://www.xmlsoft.org
uriparser (0.7.7)
For MPEG-DASH
Source: http://uriparser.sourceforge.net/
xerces-c++ (3.1.1)
For MPEG-DASH
Source: http://xerces.apache.org/
webp (0.2.1)
For Netflix
Source: https://code.google.com/p/webp/
wget (1.10.2)
GNU Wget is a free software package for retrieving
files using HTTP, HTTPS and FTP, the most widely-
used Internet protocols.
It is a non-interactive commandline tool, so it may
easily be called from scripts,?cron?jobs, terminals
without X-Windows support, etc.
Source:
http://ftp.gnu.org/gnu/wget/wget-1.10.2.tar.gz
wireless_tools (0.29)
The Wireless Tools (WT)?is a set of tools allowing to
manipulate the Wireless Extensions.
They use a textual interface and are rather crude, but
aim to support the full Wireless Extension.
Source: http://www.hpl.hp.com/personal/Jean_Tourri
lhes/Linux/Tools.html
ezxml (0.8.6)
ezXML is a C library for parsing XML documents. Used
inside Philips libraries.
Source: http://sourceforge.net/projects/ezxml/
SQLite (3.7.7.1)
SQLite is a in-process library that implements a self-
contained, serverless, zero-configuration,
transactional SQL database engine.
Source: http://www.sqlite.org/download.html
AES (aes-src-29-04-09.zip)
Advanced Encryption Standard (AES) is a
specification for the encryption of electronic data.
Used inside Philips libraries.
Source: http://gladman.plushost.co.uk/oldsite/AES/
microhttpd (libmicrohttpd-0.9.9.tar.gz)
GNU libmicrohttpd is a small C library that is
supposed to make it easy to run an HTTP server as
part of another application.
The original download site for this software is :
http://www.gnu.org/software/libmicrohttpd/This
piece of software is made available under the terms
and conditions of the LGPL v2.1 license
Source: http://ftp.gnu.org/gnu/libmicrohttpd/libmicro
httpd-0.9.9.tar.gz
yajl (lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz)
YAJL is a small event-driven (SAX-style) JSON parser
written in ANSI C, and a small validating JSON
generator. YAJL is released under the ISC license.
The original download site for this software is :
http://lloyd.github.com/yajl/This piece of software is
made available under the terms and conditions of the
ISC license
Source: http://pkgs.fedoraproject.org/repo/pkgs/yajl/
lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz/df6a751e7797b9c21
82efd91b5d64017/lloyd-yajl-2.0.1-0-gf4b2b1a.tar.gz
HMAC-SHA1 (0.1)
keyed-hash message authentication code (HMAC) is
a specific construction for calculating a message
authentication code (MAC) involving a cryptographic
hash function in combination with a secret
cryptographic key.
As with any MAC, it may be used to simultaneously
verify both the data integrity and the authentication
of a message.
Any cryptographic hash function, such as MD5 or
SHA-1, may be used in the calculation of an HMAC;
the resulting MAC algorithm is termed HMAC-MD5 or
HMAC-SHA1 accordingly.
Source:
http://www.deadhat.com/wlancrypto/hmac_sha1.c
gSoap (2.7.15)
The gSOAP toolkit is an open source C and C++
software development toolkit for SOAP/XML Web
services and generic (non-SOAP) C/C++ XML data
bindings.
Part of the software embedded in this product is
gSOAP software. Portions created by gSOAP are
Copyright 2000-2011 Robert A. van Engelen, Genivia
inc. All Rights Reserved.
Source: http://sourceforge.net/projects/gsoap2/
jquery (1.10.2)
64
jQuery is a fast and concise JavaScript Library that
simplifies HTML document traversing, event handling,
animating, and Ajax interactions for rapid web
development.
Source: http://jquery.com/
Libupnp (1.2.1)
The Linux* SDK for UPnP* Devices (libupnp) provides
developers with an API and open source code for
building control points, devices, and bridges that are
compliant with Version 1.0 of the UPnP Device
Architecture Specification.
Source: http://upnp.sourceforge.net/
mDNSResponder (mDNSResponder-320.10.80)
The mDNSResponder project is a component of
Bonjour,
Apple's ease-of-use IP networking
initiative:<http://developer.apple.com/bonjour/>
In our project, Bonjour is used for the automatic
discovery of devices and services
Source: http://developer.apple.com/bonjour/
65
21
Troubleshooting
and support
21.1
Troubleshooting
Channels
No digital channels found during the installation
See the technical specifications to make sure that
your TV supports DVB-T or DVB-C in your country.
Make sure that all cables are properly connected and
that the correct network is selected.
Previously installed channels are not in the channel
list
Make sure that the correct channel list is selected.
General
The TV does not switch on
• Disconnect the power cable from the power outlet.
Wait for one minute then reconnect it.
• Make sure that the power cable is securely
connected.
Creaking sound at startup or switch off
When you are turning the TV on, off or to standby,
you hear a creaking sound from the TV chassis. The
creaking sound is due to the normal expansion and
contraction of the TV as it cools and warms up. This
does not affect performance.
TV does not respond to the remote control
The TV requires some time to start up. During this
time, the TV does not respond to the remote control
or TV controls. This is normal behaviour.
If the TV continues to be unresponsive to the remote
control, you can check if the remote control is working
by means of a mobile phone camera. Put the phone
in camera mode and point the remote control to the
camera lens. If you press any key on the remote
control and you notice the infra red LED flicker
through the camera, the remote control is working.
The TV needs to be checked.
If you do not notice the flickering, the remote control
might be broken or its batteries are low.
This method of checking the remote control is not
possible with remote controls which are wirelessly
paired with the TV.
The TV goes back to standby after showing the
Philips startup screen
When the TV is in standby, a Philips startup screen is
displayed, then the TV returns to standby mode. This
is normal behaviour. When the TV is disconnected
and reconnected to the power supply, the startup
screen is displayed at the next startup. To switch on
the TV from standby, press on the remote control or
the TV.
The standby light keeps on blinking
Disconnect the power cable from the power outlet.
Wait 5 minutes before you reconnect the power
cable. If the blinking reoccurs, contact Philips TV
Consumer Care.
Wrong menu language
Change the language back to your language.
1 - Press and select Setup and press OK.
2 - Select TV settings > General settings > Menu
language and press OK.
3 - Select the language you want and press OK.
4 - Press , repeatedly if necessary, to close the
menu.
Picture
No picture / distorted picture
• Make sure that the antenna is properly connected to
the TV.
• Make sure that the correct device is selected as the
display source.
• Make sure that the external device or source is
properly connected.
Sound but no picture
• Make sure that the picture settings are set correctly.
Poor antenna reception
• Make sure that the antenna is properly connected to
the TV.
• Loud speakers, unearthed audio devices, neon
lights, high buildings and other large objects can
influence reception quality. If possible, try to improve
the reception quality by changing the antenna
direction or moving devices away from the TV.
• If reception on only one channel is poor, fine-tune
this channel.
Poor picture from a device
• Make sure that the device is connected properly.
• Make sure that the picture settings are set correctly.
Picture settings change after a while
Make sure that Location is set to Home . You can
change and save settings in this mode.
A commercial banner appears
Make sure that Location is set to Home.
Picture does not fit the screen
Change to a different picture format. Press .
66
Picture format keeps changing with different
channels
Select a non 'Auto' picture format.
Picture position is incorrect
Picture signals from some devices may not fit the
screen correctly. Check the signal output of the
connected device.
Computer picture is not stable
Make sure that your PC uses the supported resolution
and refresh rate.
Sound
No sound or poor sound quality
If no audio signal is detected, the TV automatically
switches the audio output off — this does not indicate
malfunction.
• Make sure that the sound settings are correctly set.
• Make sure that all cables are properly connected.
• Make sure that the volume is not muted or set to
zero.
• Make sure that the TV audio output is connected to
the audio input on the Home Theatre System.
Sound should be heard from the HTS speakers.
• Some devices may require you to manually enable
HDMI audio output. If HDMI audio is already enabled,
but you still do not hear audio, try changing the digital
audio format of the device to PCM (Pulse Code
Modulation). Refer to the documentation
accompanying your device for instructions.
Connections
HDMI
• Note that HDCP (High-bandwidth Digital Content
Protection) support can delay the time taken for a TV
to display content from an HDMI device.
• If the TV does not recognise the HDMI device and
no picture is displayed, switch the source from one
device to another and back again.
• If there are intermittent sound disruptions, make
sure that output settings from the HDMI device are
correct.
• If you use an HDMI-to-DVI adapter or HDMI-to-DVI
cable, make sure that an additional audio cable is
connected to AUDIO IN (mini-jack only), if available.
EasyLink does not work
• Make sure that your HDMI devices are HDMI-CEC
compatible. EasyLink features only work with devices
that are HDMI-CEC compatible.
No volume icon shown
• When a HDMI-CEC audio device is connected this
behaviour is normal.
Photos, videos and music from a USB device do not
show
• Make sure that the USB storage device is set to Mass
Storage Class compliant, as described in the storage
device's documentation.
• Make sure that the USB storage device is compatible
with the TV.
• Make sure that the audio and picture file formats are
supported by the TV.
Choppy playback of USB files
• The transfer performance of the USB storage device
may limit the data transfer rate to the TV which
causes poor playback.
21.2
Register
Register your TV and enjoy a range of benefits
including full support (including downloads),
privileged access to information about new products,
exclusive offers and discounts, the chance to win
prizes and even participate in special surveys about
new releases.
Go to www.philips.com/welcome
21.3
Help
This TV offers help on screen.
Open Help
1 - Press to open the Home menu.
2 - Select Help and press OK.
To look up topics alphabetically, select Keywords .
To read the Help as a book, select Book.
Before you execute the Help instructions, close Help.
To close Help, press .
Direct help
Press the key (blue) to open Help immediately.
Help will open on the chapter that is most relevant to
what you are doing or what is selected on TV.
For some activities, like Text (Teletext), the colour
keys have specific functions and cannot open Help.
TV Help on your tablet, smartphone or computer
To carry out extended sequences of instructions more
easily, you can download the TV Help in PDF format
to read on your smartphone, tablet or
computer. Alternatively, you can print the relevant
Help page from your computer.
To download the Help (user manual) go to
www.philips.com/support
67
21.4
Online help
To solve any Philips TV related problem, you can
consult our online support. You can select your
language and enter your product model number.
Go to www.philips.com/support .
On the support site you can find your country's
telephone number to contact us as well as answers to
frequently asked questions (FAQs). In some countries,
you can chat with one of our colaborators and ask
your question directly or send a question by email.
You can download new TV software or the manual to
read on your computer.
21.5
Consumer Care / Repair
For support and repair, call the Consumer Care
hotline in your country. Find the telephone number in
the printed documentation that came with the TV.
Or consult our website www.philips.com/support
.
TV model number and serial number
You might be asked to provide the TV product model
number and serial number. Find these numbers on
the packaging label or on the type label on the back
or bottom of the TV.
Warning
Do not attemp to repair the TV yourself. This may
cause severe injury, irrepairable damage to your TV
or void your warranty.
68
22
Safety and care
22.1
Safety
Important
Read and understand all safety instructions before
you use the TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Secure the TV from falling over
Always use the supplied wall bracket to secure the TV
from falling over. Mount the bracket and secure the
TV onto the bracket, even if you put the TV on the
floor.
You can find the mounting instructions in the Quick
Start Guide that came with the TV. In case you lost
this guide, you can download the guide from
www.philips.com
Use the product type number of the TV to look for the
Quick Start Guide to download.
Risk of electric shock or fire
• Never expose the TV to rain or water. Never place
liquid containers, such as vases, near the TV.
If liquids are spilt on or into the TV, disconnect the TV
from the power outlet immediately.
Contact Philips TV Consumer Care to have the TV
checked before use.
• Never expose the TV, remote control or batteries to
excessive heat. Never place them near burning
candles, naked flames or other heat sources,
including direct sunlight.
• Never insert objects into the ventilation slots or other
openings on the TV.
• Never place heavy objects on the power cord.
• Avoid force coming onto power plugs. Loose power
plugs can cause arcing or fire. Ensure that no strain is
exerted on the power cord when you swivel the TV
screen.
• To disconnect the TV from the mains power, the
power plug of the TV must be disconnected. When
disconnecting the power, always pull the power plug,
never the cord. Ensure that you have full access to
the power plug, power cord and outlet socket at all
times.
Risk of injury or damage to the TV
• Two people are required to lift and carry a TV that
weighs more than 25 kg or 55 lbs.
• If you mount the TV on a stand, only use the
supplied stand. Secure the stand to the TV tightly.
Place the TV on a flat, level surface that can support
the weight of the TV and the stand.
• When wall mounted, ensure that the wall mount can
safely bear the weight of the TV set. TP Vision bears
no responsibility for improper wall mounting that
results in accident, injury or damage.
• Parts of this product are made of glass. Handle with
care to avoid injury or damage.
Risk of damage to the TV !
Before you connect the TV to the power outlet,
ensure that the power voltage matches the value
printed on the back of the TV. Never connect the TV
to the power outlet if the voltage is different.
Risk of injury to children
Follow these precautions to prevent the TV from
toppling over and causing injury to children:
• Never place the TV on a surface covered by a cloth
or other material that can be pulled away.
• Ensure that no part of the TV hangs over the edge of
the mounting surface.
• Never place the TV on tall furniture, such as a
bookcase, without anchoring both the furniture and
TV to the wall or a suitable support.
• Teach children about the dangers of climbing on
furniture to reach the TV.
Risk of swallowing batteries !
The remote control may contain coin-type batteries
which can easily be swallowed by small children.
Keep these batteries out of reach of children at all
times.
Risk of overheating
Never install the TV in a confined space. Always leave
a space of at least 10 cm or 4 inches around the TV
for ventilation. Ensure curtains or other objects never
cover the ventilation slots on the TV.
69
Lightning storms
Disconnect the TV from the power outlet and antenna
before lightning storms.
During lightning storms, never touch any part of the
TV, power cord or antenna cable.
Risk of hearing damage
Avoid using earphones or headphones at high
volumes or for prolonged periods of time.
Low temperatures
If the TV is transported in temperatures below 5°C or
41°F, unpack the TV and wait until the TV temperature
reaches room temperature before connecting the TV
to the power outlet.
Humidity
In rare occasions, depending on temperature and
humidity, minor condensation can occur on the inside
of the TV glass front (on some models). To prevent
this, do not expose the TV to direct sunlight, heat or
extreme humidity. If condensation occurs, it will
disappear spontaneously while the TV is playing for a
few hours.
The condensation moisture will not harm the TV or
cause malfunction.
22.2
Screen care
• Never touch, push, rub or strike the screen with any
object.
• Unplug the TV before cleaning.
• Clean the TV and frame with a soft damp cloth and
wipe gently. Avoid touching the Ambilight LEDs on
the backside of the TV. Never use substances such as
alcohol, chemicals or household cleaners on the TV.
• To avoid deformations and colour fading, wipe off
water drops as quickly as possible.
• Avoid stationary images as much as possible.
Stationary images are images that remain onscreen
for extended periods of time. Stationary images
include onscreen menus, black bars, time displays,
etc. If you must use stationary images, reduce screen
contrast and brightness to avoid screen damage.
70
23
Terms of use,
copyrights and
licenses
23.1
Terms of use
2014 © TP Vision Europe B.V. All rights reserved.
This product was brought to the market by TP Vision
Europe B.V. or one of its affiliates, hereinafter
referred to as TP Vision, which is the manufacturer of
the product. TP Vision is the warrantor in relation to
the TV with which this booklet was packaged. Philips
and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V
or their respective owners. TP Vision reserves the right
to change products at any time without being obliged
to adjust earlier supplies accordingly.
The written material packaged with the TV and the
manual stored in the memory of the TV or
downloaded from the Philips website are believed to
be adequate for the intended use of the system.
The material in this manual is believed adequate for
the intended use of the system. If the product, or its
individual modules or procedures, are used for
purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. TP Vision Europe B.V. warrants that the
material itself does not infringe any United States
patents. No further warranty is expressed or implied.
TP Vision Europe B.V. cannot be held responsible
neither for any errors in the content of this document
nor for any problems as a result of the content in this
document. Errors reported to Philips will be adapted
and published on the Philips support website as soon
as possible. Terms of warranty Risk of injury, damage
to TV or void of warranty! Never attempt to repair the
TV yourself. Use the TV and accessories only as
intended by the manufacturer. The caution sign
printed on the back of the TV indicates risk of electric
shock. Never remove the TV cover. Always contact
Philips TV Customer Care for service or repairs. Any
operation expressly prohibited in this manual, or any
adjustments and assembly procedures not
recommended or authorised in this manual, shall void
the warranty. Pixel characteristics This LCD/LED
product has a high number of colour pixels. Although
it has effective pixels of 99.999% or more, black dots
or bright points of light (red, green or blue) may
appear constantly on the screen. This is a structural
property of the display (within common industry
standards) and is not a malfunction. CE compliance
This product is in compliance with the essential
requirements and other relevant provisions of
Directives 2006/95/EC (Low Voltage), 2004/108/EC
(EMC) and 2011/65/EU (ROHS). Compliance with EMF
TP Vision Europe B.V. manufactures and sells many
products targeted at consumers which, like any
electronic apparatus, in general have the ability to
emit and receive electromagnetic signals. One of
Philips’ leading Business Principles is to take all
necessary health and safety measures for our
products, to comply with all applicable legal
requirements and to stay well within the Electro
Magnetic Field (EMF) standards applicable at the
time of producing the products. Philips is committed
to develop, produce and market products that cause
no adverse health effects. TP Vision confirms that, as
long as its products are handled properly for their
intended use, they are safe to use according to
scientific evidence available today. Philips plays an
active role in the development of international EMF
and safety standards, enabling Philips to anticipate
further developments in standardisation for early
integration in its products.
23.2
Copyrights and licenses
HDMI
HDMI®
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
Dolby
Dolby®
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
71
DTS 2.0 + Digital Out ™
DTS 2.0 + Digital Out™
Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,487,535 and other U.S. and
worldwide patents issued and pending. DTS, the
Symbol, and DTS and the Symbol together are
registered trademarks and DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software. ©
DTS, Inc. All Rights Reserved.
DLNA Certified®
© 2013 Digital Living Network Alliance. All rights
reserved.
© 2013 DLNA. All rights reserved.
DTVi
The DTVi brand and logo are registered marks of
Pontifical Catholic University of Rio de Janeiro (PUC-
Rio) and the Federal University of Paraíba (UFPB).
Java
Java and all Java based trademarks are registered
trademarks of Oracle and/or its affiliates, in the United
States and other countries.
Microsoft
Windows Media
Windows Media is either a registered trademark or
trademark of Microsoft Corporation in the United
States and/or other countries.
Microsoft PlayReady
Content owners use Microsoft PlayReady™ content
access technology to protect their intellectual
property, including copyrighted content.
This device uses PlayReady technology to access
PlayReady-protected content and/or WMDRM-
protected content. If the device fails to properly
enforce restrictions on content usage, content owners
may require Microsoft to revoke the device's ability to
consume PlayReady-protected content. Revocation
should not affect unprotected content or content
protected by other content access technologies.
Content owners may require you to upgrade
PlayReady to access their content. If you decline an
upgrade, you will not be able to access content that
requires the upgrade.
Wi-Fi Alliance
Wi-Fi®, the Wi-Fi CERTIFIED logo, the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Wi-Fi
CERTIFIED Miracast™, Miracast™ are trademarks of
the Wi-Fi Alliance.
MHEG software
The copyright in MHEG software ("the Software")
comprised in this television ("this product") and
included to enable you to use interactive television
features is owned by S&T CLIENT SYSTEMS LIMITED
("the Owner"). You are permitted to use the Software
only in conjunction with this product.
72
Kensington
Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with issued
registrations and pending applications in other
countries throughout the world.
Other trademarks
All other registered and unregistered trademarks are
the property of their respective owners.
73
74
A
Active control 49
Activity style 51
Amplifier, audio system 52
Antenna connection 6
Antenna connection, tips 10
App, gallery 44
App, rental videos 45
Apps, feedback 44
Apps, lock 44
Apps, open 44
Apps, recommended 44
Apps, search 44
Audio commentary 54
Audio description 54
Audio language 27
Audio Out - Optical 11
Audio to video sync 14
Auto volume levelling 52
Automatic channel update 28
B
Backlight contrast 49
Bass 52
Blu-ray Disc, connect 15
Brightness 50
C
CAM - Conditional Access Module 12
CAM, install 12
Channel list copy 29
Channel list copy 29
Channel lock 24
Channel update message 28
Channel, favourite 23
Channel, options 24
Channel, problems 66
Channel, status 24
Channel, switch 23
Channels, rename 24
Channels, update 28
Child lock code 24
CI+ 12
Clear sound 53
Clock 35
Colour 49
Colour, Colour enhancement 50
Colour, Colour temperature 50
Common Interface slot 12
Connectivity guide 10
Consumer Care 68
Contact Philips 68
Contrast 49
Contrast, Brightness 50
Contrast, Contrast modes 50
Contrast, Gamma 50
Contrast, Video contrast 50
D
Digital Text 25
Disposal of TV or batteries 56
DVB (Digital Video Broadcast) 30
DVB, settings 30
DVI, connect 10
E
EasyLink 11
EasyLink, connection 10
EasyLink, settings 12
Eco settings 56
End of use 56
ESD 58
European Energy Label 56
F
Favourite channel list 23
Frequency scan 30
G
Game console, connect 15
Game or computer 51
Game or computer, game 36
Game, play 36
Gamma 50
H
HDCP, copy protection 10
HDMI ARC 10
HDMI CEC 11
HDMI connection, tips 10
Headphones 19
Headphones volume 52
Hearing impaired 54
Help 67
Home Theatre System, connect 13
Home Theatre System, multichannel 14
Home Theatre System, problems 14
Home Theatre System, sound 53
Home Theatre System, volume leveling 14
I
Incredible surround 52
Infrared sensor 22
Interactive TV, about 28
Interactive TV, what you need 28
Internet memory, clear 45
Internet memory, clear 8
I
iTV 27
K
Keyboard, connect 17
L
Language, audio 27
Language, menus and messages 27
Language, original 27
Location 51
M
Manual installation 31
Media servers, supported 58
Menu language 27
Miracast, block/unblock 39
Miracast, share a screen 39
75
Index
Miracast, stop sharing 39
Miracast™ 38
Mouse, connect 17
MPEG artefact reduction 51
Multi room, about 46
Multi room, setup 46
Multi room, use 46
Multi view 45
Music, playback 38
N
Network frequency 30
Network frequency mode 30
Network router 7
Network, DHCP 7
Network, password 7
Network, problems 8
Network, settings 8
Network, Static IP 7
Network, wired 8
Network, wireless 7
Noise reduction 51
O
On and Off 20
On screen Help 67
Online support 68
Online TV 45
Open source software 59
Options, on a channel 24
Original language 27
P
Parental rating 24
Pause TV 40
Photo camera, connect 18
Photos, slideshow 37
Photos, videos and music 37
Picture style 49
Picture, backlight contrast 49
Picture, colour 49
Picture, problems 66
Picture, sharpness 49
Pixel Plus link 12
Playback formats 58
Power connection 5
Power consumption, check 56
Q
Quick picture settings 48
R
Radio channel 23
Reception quality 31
Recording, list of recordings 41
Recording, record now 41
Recording, schedule a recording 41
Recording, watch a 42
Recording, what you need 16
Recording, what you need 41
Rename channels 24
Rental videos 45
Repair 68
S
Safety instructions 69
SCART connection, tips 11
Screen care 70
Screen off 56
Screen off 38
Sharpness 49
Sharpness, MPEG artefact reduction 51
Sharpness, Noise reduction 51
Sharpness, super resolution 51
Shop location 51
Sleep timer 35
Smart TV, about 43
Smart TV, internet 44
Smart TV, Multi view 45
Smart TV, open 43
Smart TV, overview 43
Smart TV, PIN code 43
Smart TV, register 43
Smart TV, start page 43
Software, current version 57
Sound style 51
Sound, problems 67
Standby 20
Subtitles 26
Subtitles, pause TV 40
Subtitles, recording 41
Support, online 68
Surround mode 52
Switch off timer 35
Switching on 20
Symbol rate 30
Symbol rate mode 30
Synchronise audio and video 14
T
Teletext 25
Text 25
Treble 52
TV clock 35
TV guide 33
TV guide, clock 35
TV network name 8
TV on Demand 45
TV placement 54
TV placement 5
TV speakers 52
Twitter 43
U
Universal access 54
Universal access, audio effect 55
Universal access, hearing impaired 54
Universal access, mixed volume 55
Universal access, speech 55
USB flash drive, connect 18
USB Hard Drive, disc space 16
USB Hard Drive, installation 16
USB keyboard 17
USB mouse 17
V
Video selection 24
Videos, playback 38
Viewing distance 5
Visually impaired 54
W
Watch TV 23
Wi-Fi 7
Wi-Fi Certified Miracast™ 38
Wired network 8
76
