Philips 47PFL5604H/12 User Manual
Displayed below is the user manual for 47PFL5604H/12 by Philips which is a product in the TVs category. This manual has pages.
Related Manuals
www.philips.com/support
Model
Serial
1
6 Install channels 32
Automatically install channels 32
Manually install channels 33
Manually update the channel list 35
Test digital reception 35
Change startup message settings 35
7 Connect devices 36
Back connectors 36
Side connectors 38
Connect a computer 39
Use a Conditional Access Module 40
Assign a channel decoder 41
Use Philips EasyLink 42
Use a Kensington lock 43
8 Product information 44
Supported display resolutions 44
Multimedia 44
Tuner/Reception/Transmission 44
Remote control 44
Power 44
Supported TV mounts 45
EPG information 45
9 Troubleshooting 46
General TV issues 46
TV channel issues 46
Picture issues 46
Sound issues 47
HDMI connection issues 48
USB connection issues 48
Computer connection issues 48
Contact us 48
10 Index 49
Contents
1 Notice 2
2 Important
4
3 Your product 7
TV overview 7
4 Use your product 9
Switch your TV on/off or to standby 9
Switch channels 9
Adjust TV volume 10
Watch connected devices 10
Use teletext 11
5 Use more of your product 12
Change language settings 12
Access the home menu 12
Access the options menu 13
Access the setup menu 13
Change picture and sound settings 14
Use advanced teletext features 18
Create and use lists of favourite channels 19
Reorder/rearrange and rename channels 20
Hide and unhide channels 21
Use the Electronic Programme Guide 22
Use timers 23
Use child and rating locks 23
Use subtitles 25
Use the TV clock 26
View photos, play music and watch video
from a USB storage device 26
Listen to digital radio channels 28
Use Scenea 29
Update the TV software 29
Change TV preferences 30
Start a TV demo 31
Reset the TV to factory settings 31
English
EN
2
Pixel characteristics
This LCD product has a high number of
colour pixels. Although it has effective
pixels of 99.999% or more, black dots or
bright points of light (red, green or blue)
may appear constantly on the screen.
This is a structural property of the display
(within common industry standards) and
is not a malfunction.
Philips Electronics Singapore Pte Ltd
hereby offers to deliver, upon request,
a copy of the complete corresponding
source code for the copyrighted open
source software packages used in this
product for which such offer is requested
by the respective licences. This offer is
valid up to three years after product
purchase to anyone in receipt of this
information. To obtain the source code,
please contact open.source@philips.
com. If you prefer not to use email, or
if you do not receive a confi rmation
receipt within a week of mailing this
email address, please write to “Open
Source Team, Philips Intellectual Property
& Standards, P.O. Box 220, 5600 AE
Eindhoven, The Netherlands”. If you
do not receive timely confi rmation of
your letter, please send an email to the
email address above. The texts of the
licences and acknowledgements for open
source software used in this product are
included on a separate leafl et.
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many products
targeted at consumers which, like
any electronic apparatus, in general
have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles
is to take all necessary health and safety
measures for our products, to comply
with all applicable legal requirements and
to stay well within the EMF standards
applicable at the time of producing the
products.
1 Notice
2009 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifi cations are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specifi ed herein, confi rmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Warranty
Risk of injury, damage to TV or void of •
warranty! Never attempt to repair the TV
yourself.
Use the TV and accessories only as •
intended by the manufacturer.
The caution sign printed on the back of •
the TV indicates risk of electric shock.
Never remove the TV cover. Always
contact Philips Customer Support for
service or repairs.
Any operation expressly prohibited in •
this manual, or any adjustments and
assembly procedures not recommended
or authorised in this manual shall void the
warranty.
EN
3
All other registered and unregistered
trademarks are the property of their respective
owners.
Manufactured under licence from BBE Sound,
Inc. Licensed by BBE, Inc under one or more
of the following US patents: 5510752,5736897.
BBE and BBE symbol are registered trademarks
of BBE Sound Inc.
Philips is committed to develop, produce
and market products that cause no
adverse health effects. Philips confi rms
that if its products are handled properly
for their intended use, they are safe
to use according to scientifi c evidence
available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments in
standardisation for early integration in its
products.
Mains fuse (UK only)
This TV is fi tted with an approved
moulded plug. Should it become
necessary to replace the mains fuse, this
must be replaced with a fuse of the same
value as indicated on the plug (example
10A).
1 Remove fuse cover and fuse.
2 The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your
dealer in order to verify the correct type.
3 Refi t the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord cable.
Copyright
VESA, FDMI and the VESA Mounting Compliant
logo are trademarks of the Video Electronics
Standards Association.
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or other
countries.
® Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
English
EN
4
When stand mounting the TV, use only •
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a fl at, level
surface that can support the combined
weight of the TV and the stand.
When wall mounting the TV, use only a •
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that result in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
Never place the TV on a surface covered •
by a cloth or other material that can be
pulled away.
Ensure that no part of the TV hangs over •
the edge of the surface.
Never place the TV on tall furniture (such •
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
Educate children about the dangers of •
climbing on furniture to reach the TV.
Risk of overheating!
Never install the TV in a confi ned space. •
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
Before you connect the TV to the power •
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Risk of injury, fi re or power cord damage!
Never place the TV or any objects on the •
power cord.
To easily disconnect the TV power cord •
from the power outlet, ensure that you
have full access to the power cord at all
times.
2 Important
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fi re!
Never expose the TV to rain or water. •
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
Never place the TV, remote control or •
batteries near naked fl ames or other heat
sources, including direct sunlight.
To prevent the spread of fi re, keep
candles or other fl ames away from the
TV, remote control and batteries at all
times.
Never insert objects into the ventilation •
slots or other openings on the TV.
When the TV is swivelled ensure that •
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Risk of short circuit or fi re!
Never expose the remote control or •
batteries to rain, water or excessive heat.
Avoid force coming onto power plugs. •
Loose power plugs can cause arcing or
fi re.
Risk of injury or damage to the TV!
Two people are required to lift and carry •
a TV that weighs more than 25 kg.
EN
5
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environment and human
health.
When you disconnect the power cord, •
always pull the plug, never the cable.
Disconnect the TV from the power •
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
Avoid using earphones or headphones at •
high volumes or for prolonged periods of
time.
Low temperatures
If the TV is transported in temperatures •
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Screen care
Avoid stationary images as much as •
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.•
Clean the TV and frame with a soft, •
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never •
touch, push, rub or strike the screen with
any object.
To avoid deformations and colour fading, •
wipe off water drops as soon as possible.
English
EN
6
•Low standby power consumption
The class-leading and highly advanced power
circuitry brings down the power consumption
of the TV to an extremely low level,
without losing out on the constant standby
functionality.
Power management
The advanced power management of this TV
ensures the most effi cient use of its energy.
You can check how your personal TV settings,
the level of brightness in current onscreen
pictures and the surrounding light conditions
determine the relative power consumption.
Philips continuously focuses on lowering
the environmental impact of its innovative
consumer products. We aim our efforts
towards environmental improvements
during manufacturing, reduction of harmful
substances, energy-effi cient use, end-of-life
instructions and product recycling.
Thanks to our environmental effort, this TV
has been awarded the European Ecolabel –the
fl ower– www.ecolabel.eu
You can fi nd detailed information on standby
energy consumption, warranty policy, spare
parts and recycling of this TV on the Philips
website for your country at www.philips.com.
This TV has features that contribute to
energy-effi cient use. This TV was awarded
the European Ecolabel for its environmental
qualities.
Energy effi ciency features
•Ambient light sensor
To save energy, the built-in Ambient
light sensor lowers the brightness of the
TV screen when the surrounding light
darkens.
•Energy saving
The [Standard] setting of the TV
combines several TV settings that result
in saving energy. See the [Smart settings]
in the [Setup] menu.
•Low standby power consumption
The class-leading and highly advanced
power circuitry brings down the power
consumption of the TV to an extremely
low level, without losing out on the
constant standby functionality.
ECO-Green
High energy effi ciency•
Low standby power•
Designed to facilitate recycling•
Philips continuously focuses on lowering
the environmental impact of its innovative
consumer products. We aim our efforts
towards environmental improvements
during manufacturing, reduction of harmful
substances, energy-effi cient use, end-of-life
instructions and product recycling.
Thanks to our environmental effort, this TV
has been awarded the European Ecolabel –the
fl ower– www.ecolabel.eu
You can fi nd detailed information on standby
energy consumption, warranty policy, spare
parts and recycling of this TV on the Philips
website for your country at www.philips.com.
This TV has features that contribute to
energy-effi cient use. This TV was awarded
the European Ecolabel for its environmental
qualities.
Energy effi ciency features
•Ambient light sensor
To save energy, the built-in Ambient
light sensor lowers the brightness of the
TV screen when the surrounding light
darkens.
•Energy saving
The [Standard] setting of the TV
combines several TV settings that result
in saving energy. See the [Smart settings]
in the [Setup] menu.
EN
7
Remote control
a ( Standby-On )
Switches the TV to standby if it is on.•
Switches on the TV if it is in standby.•
1
28 2
3
4
5
6
7
8
9
10
13
14
17
19
20
18
15
16
27
24
23
21
22
26
25
12
11
3 Your product
Congratulations on your purchase, and
welcome to Philips! To fully benefi t from the
support that Philips offers; register your product
at www.philips.com/welcome.
TV overview
This section gives you an overview of
commonly used TV controls and functions.
Side controls and indicators
a POWER : Switches the product on
or off. The product is not powered
off completely unless it is physically
unplugged.
bP/CH +/- : Switches to the next or
previous channel.
c SOURCE : Selects connected devices.
dVOLUME +/- : Increases or decreases
volume.
eFront LED indicator
fLightGuide : Available only on PFL7864H
models.
3
4
2
1
5
6
English
EN
8
s0-9 ( Numeric buttons )
Selects a channel or setting.
t PICTURE
Launches the picture menu.Not
supported on all models.
u SOUND
Launches the sound menu.Not supported
on all models.
v +/- ( Volume +/- )
Increases or decreases volume.
w BACK P/P ( Previous channel )
Returns to the previous menu •
screen.
Returns to the previous channel. •
(UK only: Not supported on MHEG
channels).
x GUIDE
Accesses or exits the Electronic
Programme Guide (EPG).
ySCENEA ( Wallpaper )
Displays wallpaper on your TV screen.
Not supported on all models.
zDEMO
Toggles the demonstration menu on or
off.
{TV
Switches back to the aerial source.
|SUBTITLE
Enables or disables subtitles.
*Controls the connected EasyLink-compliant
device.
bMHEG/TELETEXT
Toggles teletext on or off.
c SOURCE
Selects connected devices.
dColour buttons
Selects tasks or options.
eAD ( Audio Descriptor )
UK only: Enables audio commentary for
the visually handicapped. Not supported
on all models.
f ( Home )
Toggles the home menu on or off.
g OPTIONS
Accesses options relating to the current
activity or selection.
hOK
Confi rms an entry or selection.
i ( Navigation buttons )
Navigates menus.
j INFO
Displays programme information, if
available.
k ( Backward )
*Searches backward.
l ( Forward )
*Searches forward.
m ( Play/Pause )
*Starts, pauses or resumes playback.
n ( Record )
*Starts or stops video recording.
o ( Stop )
*Stops playback.
p ( Mute )
Mutes or restores volume.
qP +/- ( Programme +/- )
Switches to the next or previous channel.
r FORMAT
Selects a picture format.
EN
9
Note
If you cannot locate your remote control and •
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.
Switch channels
Press • P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the •
Numeric buttons.
Use the channel • grid (see ‘Switch
channels with the channel grid’ on page
10 ).
Note
When you use a favourite list, you can only •
select those channels in the list.
4 Use your product
This section helps you perform basic operations .
Switch your TV on/off or to
standby
To switch on
If the front LED indicator is off, press •
POWER at the side of the TV.
If the front LED indicator is red, press •
(Standby-On) on the remote control.
To switch to standby
Press • ( Standby-On) on the remote
control.
The front LED indicator switches to »
red.
To switch off
Press • POWER at the side of the TV.
The front LED indicator switches off.»
Tip
Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
English
EN
10
Adjust TV volume
To increase or decrease volume
Press • +/-.
Press • VOLUME +/- on the side of the TV.
To mute or unmute sound
Press • to mute the sound.
Press • again to restore the sound.
Note
Use the •[Sound] menu to adjust headphone
volume (see ‘Manually adjust sound settings’
on page 17 ).
Watch connected devices
Note
For easy access, add new devices to the home •
menu before selecting them.
Add a device to the home menu
Connect and switch on devices before adding
them to the home menu.
Switch channels with the channel grid
The channel grid allows you to view all
available channels in a grid format.
1 Press OK.
The channel grid appears.»
2 Press the Navigation buttons to select a
channel.
3 Press OK to confi rm your choice.
The selected channel appears.»
Ned
Ned
1
1
1
Nd
Ned
2
2
2
2
2
RTL
RTL
4
4
4
4
4
RTL
RTL
5
5
5
5
5
Comedy
1
6
66
1
6
6
edy
ed
CNN
7
17
7
NN
Anim
al
9
9
1
11
9
9
9
9
m
al
m
a
HBO
B
0
2
2
2
2
0
OO
Euro
ro
s
sp
sp
8
8
1
1
8
8
8
sp
sp
p
sp
p
BBC
B
1
11
11
BBC 2
12
2
2
Disc
over
1
1
4
4
ver
ve
Nati
onal
a
15
15
onal
a
on
KetN
KetN
KetN
et
1
1
33
3
1
1
3
3
3
N
N
N
et
et
et
et
N
N
et
e
et
SBS
SBS
SBS
S
6
6
6
6
6
6
6
6
6
6
6
6
6
RTL
RTL
RTL
7
7
7
7
Net
5
9
9
9
9
9
9
9
9
9
9
9
Nickelo
0
0
0
0
1
1
1
0
0
0
0
elo
elo
1
Ned
Ned
3
3
3
3
2
2
2
2
2
7
7
7
7
7
7
7
7
7
7
7
7
7
3
3
3
3
3
3
3
3
3
3
3
RTL 8
8
EN
11
3 Press OK to confi rm your choice.
The TV switches to the selected »
device.
Select a device via the source list
1 Press SOURCE.
The source list appears.»
2 Press the Navigation buttons to select a
device.
3 Press OK to confi rm your choice.
The TV switches to the selected »
device.
Use teletext
1 Press MHEG/TELETEXT.
The teletext screen appears.»
2 Select a page by:
Entering the page number with the •
Numeric buttons.
Pressing •P +/- or the Navigation
buttons to view the next or previous
page.
Pressing the • Colour buttons to
select a colour coded item.
Pressing • BACK to return to a
previously viewed page.
3 Press MHEG/TELETEXT to exit teletext.
1 Press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Add your devices].
3 Press OK.
A message appears with »[Start]
selected, prompting you to start the
add new device guide.
4 Press OK.
Follow the on-screen instructions to »
select the type of device and where
it is connected. When the guide is
complete, a new device icon is added
to the home menu.
Tip
To avoid screen clutter, remove devices from •
the home menu when they are no longer
connected (see ‘Remove devices from the
home menu’ on page 13 ).
Select a device via the home menu
1 Press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select a
device.
Browse USBWatch TV
Add
your devices
Setup
English
EN
12
•[Primary subtitles]/[Secondary subtitles]
Select primary and secondary subtitle
languages for digital channels.
•[Primary teletext]/[Secondary teletext]
Select primary and secondary teletext
languages for digital channels.
•[Hearing impaired]
Select [On] to display subtitles with
primary and secondary audio languages.
•[Visually impaired]
If available, select to hear additional
audio commentary for the visually
impaired through the options: [Speakers],
[Headphones] or [Speakers +
headphones]. Select [Off] to disable the
feature.
•[Preferred audio format]
Select [Advanced] for best sound
reproduction from home theatre
systems. Select [Standard] for best sound
reproduction from the TV speakers and
basic sound systems.
Access the home menu
The home menu gives you easy access to
connected devices, picture and sound settings,
and other useful features.
1 Press ( Home).
The home menu appears.»
Browse USBWatch TV
Add
your devices
Setup
5 Use more of
your product
Change language settings
Note
Skip this step if your language settings are •
correct.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
The»[Setup] menu appears.
3 Press the Navigation buttons to select
[Installation] > [Languages] > [Menu
language].
A list of languages appears.»
4 Press the Navigation buttons to select a
menu language.
5 Press OK to confi rm your choice.
The selected language is applied to the »
menu.
In addition to [Menu language], you can
confi gure the following language settings via
the [Languages] menu (digital channels only):
•[Primary audio]/[Secondary audio]
Select primary and secondary audio
languages for digital channels.
Menu language
ChannChann
el in
el in
stall
stall
ation
ation
Prefe
Pr
P
rence
ence
nce
nce
s
s
s
s
P
P
Prima
Prima
ry
ry au
ry au
ry
dio
dio
Seco
Sec
con
on
dary
dary
ary
ary
audio
audio
audio
audio
P
r
i
ma
ry su
y su
bti
btitl
btitl
btitl
es
es
es
Dec
Decod
Dec
od
erer
Secon
Secon
S
dary
d
subti
su
tle
es
es
es
Clock
o
Dansk
nsk
C
eŠti
na
Facto
t
t
ry re
r
set
s
P
r
i
ma
ry te
y t
y t
l
etext
Seco
Secon
dary
ary
ry
telettelet
telet
elet
exexext
ext
H
ear
i
ng im
m
paire
i
d
d
d
d
DeutsDeuts
ch
ch
EÏÏËÓÈÎο
EÏÏËÓÈÎο
English
Españ
E
ol
Franç
nç
nç
nç
ais
ais
ais
ais
Hrvat
Hr a
H
H
ski
Languages
EN
13
Access the options menu
The options menu gives you quick access to the
picture and sound experience bar and other
useful features such as [Status]. The [Status]
menu gives you an overview of current TV
information.
1 When watching TV, press OPTIONS.
The options menu appears.»
2 Press the Navigation buttons to select an
option.
3 Press OK.
The menu of the selected option »
appears.
Access the setup menu
The [Setup] menu gives you access to picture,
sound and other TV settings.
1 Press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
Status
Visu
ally
y
imp
p
aire
air
d
Volu
Volu
Volu
Volu
me -
me -
me
me
Vis
Vis
Vis
Vis
uall
uall
uall
uall
y imy im
y im
y im
p
pa
pa
pair
e
d
Mark
Mark
Mark
Mark
as
as
as
as
favo
favo
favofavo
uriuri
urit
uri
e
e
e
e
Comm
Comm
Comm
mm
on i
on i
on i
on i
nte
nte
nte
nte
r
r
r
r
facfacfaceface
erer
er
er
f
ce
ce
ce
ce
Cloc
o
k
2 Press the Navigation buttons to select a
home menu item:
•[Watch TV]Switches back to the
aerial source if another source is
selected.
•[Setup]Accesses menus to change
picture, sound and other settings.
•[Add your devices]Adds new devices
to the home menu.
•[Browse USB]If a USB storage
device is connected, accesses the
USB content browser.
3 Press OK to confi rm your choice.
Tip
Press • ( Home) at any time to exit the home
menu.
Press
• BACK at any time to exit the [Setup]
menu.
Press
• OPTIONS at any time to exit an
options menu.
Remove devices from the home menu
If a device is no longer connected to the TV,
remove it from the home menu.
1 Press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select a
device to remove.
3 Press OPTIONS.
A list appears, with »[Remove this
device] selected.
4 Press OK.
A message appears, prompting you to »
remove the device.
5 Press OK.
The home menu appears, with the »
device removed.
English
EN
14
[Picture] and [Sound] menus in
[Setup].
•[Vivid] Applies rich and dynamic
settings, ideal for daylight use.
•[Natural] Applies a natural setting.
•[Cinema] Applies settings for
watching movies.
•[Game] Applies settings for gaming.
•[Standard] Applies the most energy
conscious settings. Factory standard
settings.
7 Press OK to confi rm your choice.
The smart setting is applied. »
8 Press BACK to exit or press
(Home) to go back to the home menu.
Note
•[Smart settings] is also accessible via the
[Picture and sound] experience bar (see ‘Use
the picture and sound experience bar’ on page
15 ).
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Picture] > [Settings assistant].
5 Press OK.
A message appears prompting you to »
start the settings assistant.
6 Press the Navigation buttons to select
[Start].
7 Press OK.
Follow the on-screen instructions to »
choose your preferred picture and
sound settings.
Change picture and sound
settings
Change picture and sound settings to suit your
preferences. You can apply pre-defi ned settings
or change settings manually.
Note
The fl exibility to change settings is limited if •
the TV location is set to [Shop] mode. Set the
TV location to [Home] mode to access all TV
settings (see ‘Change TV preferences’ on page
30 ).
Use smart settings
Use smart settings to apply pre-defi ned
picture and sound settings.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Smart settings].
5 Press OK.
A list of smart settings appears.»
6 Press the Navigation buttons to select:
•[Personal]Sets the TV to your
personal preferences set in the
Personal
Vivi
V
d
N
N
Natu
ral
Cine
Cine
Cine
mama
ma
G
Game
Game
Stan
Stan
dard
dard
EN
15
The following settings can be confi gured via
the [Picture and sound] experience bar.
•[Smart settings] Applies pre-defi ned
picture and sound settings.
•[Colour] Adjusts colour saturation.
•[Contrast] Adjusts the intensity of bright
areas, keeping dark areas unchanged.
•[Bass] Adjusts the bass level.
•[Treble] Adjusts the treble level.
•[TV speakers] Turns on or off TV
speakers. If [Automatic (EasyLink)] is
selected, the TV speakers are switched
off when content from an EasyLink-
compliant home theater system is
detected.
Note
•[Bass] and [Treble] are not available if [TV
speakers] are set to [Off].
Manually adjust picture settings
1 Press PICTURE.
The»[Picture] menu appears.
2 Press the Navigation buttons and OK to
select and adjust a picture setting.
3 Press BACK to exit.
Tip
The •[Picture] menu is also accessible via the
[Setup]menu (see ‘Access the setup menu’ on
page 13 ).
Picture
Settings assistant
Sound
S
S
S
FeaFeatu
Featu
Feat
res
res
Smart sett
ings
Contr
nt
t
Cont
Cont
on
t
t
ast
ast
C
Brigh
Brigh
Brigh
Brigh
tnesstnesstness
tness
tnes
Colou
u
u
r
I
nsta
ll
at
i
on
H
u
e
Softw
t
t
t
t
are u
pdate
Noise
redu
redu
d
redu
edu
tiction
ction
tion
Ti
n
t
Sharp
p
p
p
ness
Use the picture and sound experience
bar
Use the [Picture and sound] experience bar
to access frequently used picture and sound
settings.
Note
All picture settings are available via the •[Picture]menu (see ‘Manually adjust picture
settings’ on page 15 ).
All sound settings are available via the
•[Sound]menu (see ‘Manually adjust sound
settings’ on page 17 ).
1 When watching TV, press OPTIONS.
The options menu appears.»
2 Press the Navigation buttons to select
[Picture and sound].
The»[Picture and sound] experience
bar appears.
3 Press the Navigation buttons to select a
picture or sound setting to adjust.
4 Press OK.
The picture or sound setting menu »
appears.
5 Press the Navigation buttons to adjust
the picture or sound setting.
6 Press OK to confi rm your choice.
The picture o r sound setting »
is applied and the [Picture and sound]
experience bar reappears.
7 Press BACK to exit.
Smart settings
English
EN
16
which provides maximum detail for
display of PC content.
•[Light sensor] Adjusts settings
dynamically to match lighting conditions.
•[Picture format] Changes the picture
format.
•[Auto format mode] Sets the
picture format to automatically fi ll or
automatically zoom into the screen.
Tip
If •[Auto format mode] is disabled, select
[Picture format] > [Auto format] to enable
the option.
•[Picture shift]Adjusts the position of the
picture.
Note
•[Colour] and [Contrast] settings are also
accessible via the [Picture and sound]
experience bar (see ‘Use the picture and
sound experience bar’ on page 15 ).
Change picture format
1 Press FORMAT.
A list of picture formats appears.»
2 Press the Navigation buttons to select a
picture format.
3 Press OK to confi rm your choice.
The selected picture format is »
activated.
Movie expand 16:9
SupeSupe
Sup
Sup
r zo
r zo
om
om
A
uto format
Unsc
Uns
Uns
Uns
ale
d
WideWideWide
Wid
scr
scr
scr
scr
een
een
eeneen
The following picture settings can be
confi gured. Depending on the format of the
picture source, some picture settings are not
available.
•[Settings assistant] Use settings assistant
to guide you through the best picture and
sound settings.
•[Contrast] Adjusts the intensity of bright
areas, keeping dark areas unchanged.
•[Brightness] Adjusts the intensity and
details of dark areas.
•[Colour] Adjusts colour saturation.
•[Hue] Compensates colour variations in
NTSC encoded transmissions.
•[Sharpness] Adjusts sharpness in the
image.
•[Noise reduction] Filters and reduces
noise in an image.
•[Tint] Adjusts the colour balance in an
image.
Note
Before you adjust •[Custom tint], select [Tint]
>[Custom], then press OK to enable the
option.
•[Custom tint]Customises tint setting.
•[Pixel Plus HD]/[Pixel Precise
HD]Accesses advanced settings:
•[Dynamic contrast] Enhances
contrast.
•[Dynamic backlight] Adjusts
brightness of the TV backlight to
match lighting conditions.
•[MPEG artefact reduction]
Smoothes out transitions on digital
pictures. You can switch this feature
on or off.
•[Colour enhancement] Makes
colours more vivid and improves
the details in bright colours. You can
switch this feature on or off.
•[PC mode] Enables picture settings
adjustment when a PC is connected to
the TV via HDMI. If enabled, you can
select [Picture format] > [Unscaled]
EN
17
2 Press the Navigation buttons and OK to
select and adjust a sound setting.
3 Press BACK to exit.
Tip
The •[Sound] menu is also accessible via the
[Setup]menu (see ‘Access the setup menu’ on
page 13 ).
The following sound settings can be
confi gured. Depending on the broadcast,
some sound settings may not be available.
•[Bass] Adjusts the bass level.
•[Treble] Adjusts the treble level.
•[Volume] Adjusts the volume.
Note
Before you adjust •[Volume - Visually
impaired], enable [Visually impaired]. When
watching TV, press OPTIONS and select
[Visually impaired]. Select a preferred option
and press OK.
•[Volume - Visually impaired] Sets the
mix of visually impaired audio with regular
audio. When available, visually impaired
audio includes audio descriptions of on-
screen action. You can also enable this by
pressing AD ( Audio Descriptor).
•[Audio language] (Digital channels only)
Selects between audio languages when
multiple languages are broadcast.
•[Dual I-II] (Analogue channels only)
Selects between audio languages when
dual sound is broadcast.
Sound
Bass
-8
Pictu
Pictu
re
re
S
mart settin
g
s
T
T
Tr
Trebl
e
Volu
Vol
lum
um
e
e
V
o
l
um
e - V
- V
isual
isua
sual
sual
ly im
ly im
ly im
pair
pai
pa
air
FeatuFea
Fea
atu
resres
I
nstallation
Audio
Audio
A
lang
uage
u
Softw
t
t
are u
are u
pdate
pda
Dual
I/II
II
I
Mono
Mono/
Stere
tere
ere
o
o
o
o
T
V sp
eaker
r
s
Bass
Tip
Picture formats are also accessible via the •[Setup]menu (see ‘Access the setup menu’ on
page 13 ).
The following picture formats can be selected.
Note
Depending on the picture source, some •
picture formats are not available and will not
be seen on-screen.
Before you adjust
•[Unscaled], select [Picture]
>[PC mode] > [On], then press OK to
enable the option.
[Auto format] Enlarges
the picture to fi ll the
screen (subtitles remain
visible). Recommended for
minimal screen distortion
(but not for HD or PC).
[Super zoom] Removes
the black bars on the sides
of 4:3 broadcasts. Not
recommended for HD
or PC.
[Movie expand 16:9]
Scales the classic 4:3
format to 16:9. Not
recommended for HD
or PC.
[Wide screen] Stretches
the classic 4:3 format to
16:9
[Unscaled] Provides
maximum detail for PC.
Only available when [PC
mode] is enabled in the
[Picture] menu.
Manually adjust sound settings
1 Press SOUND.
The»[Sound] menu appears.
English
EN
18
3 Press the Navigation buttons to select an
option:
•[Freeze page] Freezes the current
page.
•[Dual screen]/[Full screen] Enables
and disables dual screen teletext.
•[Reveal] Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
•[Cycle subpages] Cycles through
subpages automatically if subpages
are available.
•[Language] Switches to a different
language group to display a language
correctly when it uses a different
character set.
4 Press OK to confi rm your choice.
The teletext screen appears.»
Tip
Press • OPTIONS at any time to exit the
options menu.
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
Note
Enable cycling of subpages before selecting •
subpages (see ‘Access the teletext options
menu’ on page 18 ).
Freeze page
Dual
Dual
Dual
scr
scr
scr
een
een
een
Reve
Reve
Reve
al
a
al
Cycl
Cycl
Cycl
e su
e su
e su
bp
b
g
es
es
e
pag
es
es
es
Lang
Lang
Lang
ng
uage
uage
uage
uag
•[Mono/Stereo] Selects mono or stereo if
stereo broadcast is available.
•[TV speakers] Turns on or off TV
speakers. If [Automatic (EasyLink)] is
selected, the TV speakers are switched
off when content from an EasyLink-
compliant home theater system is
detected.
•[Surround] Enables spatial sound.
•[Headphones volume] Adjusts
headphone volume.
•[Delta volume] Levels out volume
differences between channels or
connected devices. Switch to the
connected device before you change the
delta volume.
•[Balance] Adjusts the balance of the right
and left speakers.
•[Auto volume leveling] Automatically
reduces sudden volume changes, for
example, when switching channels.
Note
•[Bass],[Treble] and [TV speakers] settings
are also accessible via the [Picture and sound]
experience bar (see ‘Use the picture and
sound experience bar’ on page 15 ). When
supported, [Audio language] and [Volume -
Visually impaired] are directly accessible from
the options menu.
Use advanced teletext
features
Access the teletext options menu
Access the teletext features through the
teletext options menu.
1 Press MHEG/TELETEXT.
The teletext screen appears.»
2 Press OPTIONS.
The teletext options menu appears.»
EN
19
3 Press:
• to scroll up and down the
enlarged screen.
• FORMAT to return to normal
screen size.
Use Teletext 2.5
Teletext 2.5 offers more colours and better
graphics than normal teletext. If Teletext 2.5
is broadcast by a channel, it is switched on by
default.
1 When watching TV, press OPTIONS.
The options menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Installation] > [Preferences] > [Teletext
2.5] > [On] or [Off].
Teletext 2.5 is enabled or disabled.»
5 Press BACK to exit or press
(Home) to go back to the home menu.
Create and use lists of
favourite channels
You can create lists of your preferred TV
channels so that you can fi nd those channels
easily.
Note
Digital radio stations can also be added to •
favourite lists, if supported.
View only channels in a favourite list, or
view all channels if a favourite list is currently
selected.
1 When watching TV, press OK.
The channel grid appears.»
2 Press OPTIONS.
The options menu appears.»
1 Press MHEG/TELETEXT.
The teletext screen appears.»
2 Select a teletext page.
3 Press or to select a subpage.
The subpage appears.»
Select T.O.P. teletext broadcasts
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to
another without using page numbers. T.O.P.
teletext is not broadcast on all TV channels.
1 Press MHEG/TELETEXT.
The teletext screen appears.»
2 Press INFO.
The T.O.P. overview appears.»
3 Press the Navigation buttons to select a
subject.
4 Press OK to confi rm your choice.
The teletext page appears.»
Search teletext
Search a teletext page by subject or word.
1 Press MHEG/TELETEXT.
The teletext screen appears.»
2 Press OK to highlight the fi rst word or
number.
3 Press the Navigation buttons to skip to
the word or number to search.
4 Press OK to begin the search.
5 Press until no word or number is
highlighted to exit the search.
Enlarge teletext pages
For more comfortable reading, you can
enlarge the teletext page.
1 Press MHEG/TELETEXT.
The teletext screen appears.»
2 Press FORMAT.
The teletext screen is enlarged.»
English
EN
20
3 Press the Navigation buttons to select
[Mark as favourite] or [Unmark as
favourite].
A star appears in the channel grid, »
indicating that the channel is added to
the favourite list. The star disappears if
you chose to remove the channel from
the favourite list.
Reorder/rearrange and
rename channels
Reorder/rearrange channels
Reorder/rearrange channels in the grid to your
desired location.
1 When watching TV, press OK.
The channel grid appears.»
2 Press OPTIONS.
The options menu appears.»
3 Press the Navigation buttons to select
[Reorder], then press OK.
An on-screen message appears. To »
continue, go to step 4.
To cancel and exit, press » OPTIONS
and follow the on-screen instructions.
4 Press the Navigation buttons to select
the channel to reorder in the grid.
A box appears around the selected »
channel.
Ned
Ned
Ned
1
1
1
1
1
1
1
1
1
1
1
RTL
RTL
RTL
4
4
4
4
4
4
RTL
RTL
RTL
5
5
5
5
5
5
5
5
C
o
m
6
6
1
1
1
1
1
66
6
6
6
6
6
6
m
e
dy
y
dy
y
me
dy
y
C
CN
1
1
7
7
N
N
NN
Anim
An
An
9
9
1
1
1
1
1
1
1
1
9
9
9
9
9
9
9
9
m
al
m
a
B
HBOHBO
HBO
0
2
22
2
2
2
2
2
0
0
0
0
0
O
O
O
O
O
O
O
Eu
uro
uro
r
r
8
8
8
8
8
8
8
8
1
1
1
1
1
1
1
1
8
8
8
8
8
8
88
o
o
o
o
o
sp
sp
sp
sp
sp
sp
p
p
o
s
s
s
BB
BBCBBC
11
1
111
1
1
1
1
1
1
1
1
1
1
1
C C
1
1
1
C
C
1
1
BB
C
1
1
1
2
2
12
1
2
C
2
2
C
2
2
D
Dis
Disco
1
1
1
1
4
4
4
1
1
1
4
4
1
1
4
4
o
ver
over
Nati
Na
Na
1
1
1
1
555
1
5
5
5
1
1
5
5
onal
na
nal
a
ona
nal
KetKet
Ket
Ket
Ket
Ket
Ket
Ket
11
1
1
1
1
1
1
33
3
3
3
3
3
3
1
1
3
3
3
3
3
3
1
1
1
3
3
3
NN
N
NNN
N
N
et
et
et
et
et
et
et
e
NNN
N
N
N
e
e
e
e
SBS
SBSSBSSBS
S
S
SB
SBS
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
RTL
RTL
RTL
RTL
RTL
RTL
RTL
RTL
7
7
7
7
7
7
7
7
7
7
7
7
Net
5
9
9
9
9
9
9
9
9
9
9
9
9
Nic
k
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
k
elo
k
elo
e
Ned
Ned
Ned
3
3
3
3
3
3
3
3
3
3
7
RTL 8
8
Ned
2
2
2
3 Press the Navigation buttons to select
[Select list].
4 Press OK.
The»[Select list] menu appears.
5 Press the Navigation buttons to select:
•[All] Displays all channels.
•[Favourites] Displays channels in a
selected favourite list.
•[Radio] Displays radio channels only.
•[Digital] Displays digital channels only.
•[Analogue] Displays analogue
channels only.
6 Press OK to confi rm your choice.
The selected list is applied to the »
channel grid.
Add or remove channels from a
favourite list
Tip
Select •[All] channels before adding a channel
to a favourite list.
1 When watching TV, switch to the channel
you want to add or remove from a
favourite list.
Alternatively, press OK to enter the
channel grid and press the Navigation
buttons to select the channel to add or
remove.
2 Press OPTIONS.
The options menu appears.»
Ned
Ned
1
1
1
1
1
1
1
Ned
Ned
2
2
22
2
2
2
2
RTL
RTL
4
4
4
4
RTL
RTL
5
5
5
5
5
5
6
6
1
1
1
6
1
7
A
n
im
9
1
1
1
1
9
9
9
9
m
al
m
a
HBO
B
0
2
2
2
2
0
0
0
O
O
O
O
Euro
ro
8
8
8
1
1
1
8
8
8
8
oo
sp
sp
sp
o
s
s
Disc
o
1
1
1
4
1
4
1
4
o
ver
over
Nati
1
1
5
5
15
15
onal
a
onal
Ket
Ket
Ket
Ket
1
1
1
1
3
3
3
3
1
3
3
3
3
1
3
3
N
N
N
et
et
et
et
N
N
e
e
e
Net
5
9
9
9
9
9
9
9
9
Nic
k
0
0
1
1
1
0
0
0
0
k
elo
k
elo
Ned
Ned
3
3
3
3
3
3
3
RTL 8
8
Show hidden channels
Mark as favourite
Reorder
Rename
Hide channel
Select list
EN
21
4 Press the Navigation buttons to select
[Hide channel].
5 Press OK to confi rm your choice.
The channel is hidden.»
6 Press BACK to exit the channel grid.
Unhide channels
Display hidden channels.
1 When watching TV, press OK.
The channel grid appears.»
2 Press OPTIONS.
The options menu appears.»
3 Press the Navigation buttons to select
[Show hidden channels].
4 Press OK.
Hidden channels appear in the channel »
grid, but without channel information
displayed. It is displayed as a black box.
5 Press the Navigation buttons to select
the channel to unhide.
6 Press OPTIONS.
The options menu appears.»
7 Press the Navigation buttons to select
[Unhide channel], then press OK.
The channel is unhidden.»
Note
Repeat steps 5 through 7 to unhide other •
channels.
Ned
Ned
1
1
1
1
RTL
RTL
4
4
4
4
RTL
RTL
5
5
5
5
5
5
C
o
m
6
6
1
1
1
6
6
6
6
m
e
dy
y
y
me
dy
CN
C
1
7
N
N
NN
A
n
im
9
1
1
1
1
9
9
9
9
m
al
m
a
HBO
B
0
2
2
2
2
0
0
0
O
O
O
O
Euro
ro
8
8
8
1
1
1
8
8
8
8
oo
sp
sp
sp
o
s
s
BBC
B
1
1
1
11
11
C
1
C 1
BB
C
1
1
2
12
12
C
2C 2
Di
sc
o
1
1
1
4
1
4
1
4
o
ver
over
N
at
i
1
1
5
5
15
15
onal
a
onal
Ket
Ket
Ket
Ket
1
1
1
1
3
3
3
3
1
3
3
3
3
1
3
3
N
N
N
et
et
et
et
N
e
e
e
SBS
S
SBS
SBS
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
RTL
RTL
RTL
RTL
7
7
7
7
7
Net
5
9
9
9
9
9
9
9
9
Nic
k
0
0
1
1
1
0
0
0
0
k
elo
k
elo
Ned
Ned
3
3
3
3
3
3
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
3
3
3
3
3
3
3
3
3
3
3
3
3
3
7
RTL 8
8
Ned
2
2
2
5 Press the Navigation buttons to move the
channel to the desired location in the grid.
6 Press OK to confi rm your choice.
The channel is moved to the selected »
location.
7 Press BACK to exit the channel grid.
Rename channels
Rename channels in the TV channel list.
1 When watching TV, press OK.
The channel grid appears.»
2 Press the Navigation buttons to select a
channel to rename.
3 Press OPTIONS.
The options menu appears.»
4 Press the Navigation buttons to select
[Rename].
An entry screen appears.»
5 Press the Navigation buttons or Numeric
buttons to edit the name, then press OK.
6 Once complete, press the Navigation
buttons to select [Done].
To clear the name entered, select •
[Clear].
To cancel, select • [Cancel].
7 Press OK to confi rm your choice.
8 Press BACK to exit the channel grid.
Hide and unhide channels
Hide channels
Hide channels from the grid, to prevent
unauthorised access.
1 When watching TV, press OK.
The channel grid appears.»
2 Press the Navigation buttons to select a
channel to hide.
3 Press OPTIONS.
The options menu appears.»
English
EN
22
• OPTIONS to view the options
menu (see ‘Use the EPG options
menu’ on page 22 ).
3 Press BACK to exit to the original
channel, or press OK to exit to the
selected channel.
View channel/programme information
1 When watching TV or when in EPG,
press INFO.
The programme information screen »
appears.
2 Press the Navigation buttons to navigate
the screens.
3 Press INFO to exit back to the original
channel or press BACK to exit to the
EPG menu.
Use the EPG options menu
Use the EPG options menu to set or clear
reminders, change day and access other useful
EPG options.
Note
The EPG options are only accessible for 8 days •
of TV channel information.
1 When in EPG, press OPTIONS.
The EPG options menu appears.»
O
NO
N
N
N
W
NE
XT
N
NO
N
N
N
W
Ned 1
Ned 1
Ned 2
e
e
ChestChest
Chest
hest
k
y Fee
ee
t
t
n
n
ra
Jan
n
f
L
o
tus
s
s
20:10 Click Chic
21:321:3
21:321:3
2
22
22:0
22
2:4
2:40
2
NCS
S
2
2:30 Point Blank
21:30
21
21
21
Z-Te
am
2
1:10
Unlu
cky L
y
uk
e
21:25
21:25
2
21
Disa
ster
Earth
h
20:45
2
2
120
120
0
0
Days
Days
of
h
e Brid
ge
k
y Fe
Fe
an
f
Ned
2
20:15
20:
Trea
sure
r
Ned 3
Ned 3
20:1020:10
The
The
Man
RTL 4RTL 4
RTL 5
SBS 6
SBS 7
Veronica
20:00 Flyi
ng L
20:15
Funk
2
20 0
eo
patr
p
0:10
10
She
Sh
Wol
20:0
2
20:05
Unde
r Th
-
Wol
20:10
2
20:1
2
20:15 Funk
00 Cl
00
Cl
ee
n
n
L
lf
h
k
k
r
lf
lf
Set reminder
Clea
ea
rre
r re
mind
mind
er
er
Clea
ea
rre
mind
er
d
C
Chan
han
ge d
ge d
ay
a
Chan
han
ge d
ay
2
2
20
0
0:
:1
1
5
5
5
T
T
Tr
r
re
ea
a
sur
RT
TL
L
L
4
4
4
R
1
1
15
5
5
Fu
RT
TL
L
L
5
5
5
2
2
20
0
0:
:1
1
15
5
5
Fun
More
More
inf inf
o
o
More
re
inf
o
2
2
20
0
0:
0
e
eo
pat
SB
BS
S
S
6
6
6
2
0
0
0
0
C
C
Cl
l
nre
nre
2
20:020:0
Sear
Sear
ch b
ch b
y ge
y ge
yg
SBS 6SBS 6
e
en
22
e
e
0
0
Schedule
d re
d re
mind
mind
ers
e
20:120:1
SBS
7
SBS 7
e
0
She
Sh
S
e
mind
ers
20:10 She-
20:10 She-
Preferre
d ch
d
anne
ann
ls
VeronicaVeronica
h
20:05
0
U
20:05 U
Use the Electronic
Programme Guide
Note
EPG is not available in all countries. If available, •
you will receive either [Now]/[Next] or 8 days
EPG.
EPG is an on-screen guide available for digital
channels. EPG allows you to:
View a list of digital programmes being •
broadcast
View upcoming programmes•
Group programmes by genre•
Set reminders when programmes start•
Set up preferred EPG channels•
Switch on EPG
Note
The fi rst time you use EPG, you may be •
prompted to perform an update. Follow the
on-screen instructions to perform the update.
1 When watching TV, press GUIDE.
The EPG menu appears.»
2 Press:
The • Navigation buttons to move
around the screen.
• INFO to view more information
about a programme (see ‘View channel/
programme information’ on page 22 ).
NE
XT
Ned 1
Ned 2
20:15
20:15
20:15
20:15
Trea Trea Trea
Trea
sure sure
su
su
Chest
Chest
est
st
20:15 Funk
y Fee
ee
ee
t
t
Ned 3
Ned 3
Ned 3
Ned
RTL 4
RTL 4
RTL 5
5
SBS 6
6
2
0:00 Cleo
p
atra Ja
m
20:10
She-Wol
f
S
B
S
7
Veronic
a
NO
NO
NO
N
N
W
W
W
N
O
NO
N
NO
O
N
N
N
N
NO
O
N
NO
W
W
W
W
W
W
W
T
T
Ch
20 1
20 10
20 10
10
20:1
20:10
20:10
20:10
20:10
20:
20:10
2
20:10
20:
2
20
:0
Th
The
The
TheThe
Th
Th
The
The
Th
Th
Th
The
Man
M
Man
Man
Man
Man
Man
Man
W
W
20:00 Flying Lotus
20:10 Click Chic
21:30
21:30
21:30
21:30
C C
Cave
C
C
22:00
2
40
N
CS
2
22:4
P
oint Bla
nk
22:3
:30
30
2
2
2
P
Z
-
Tea
m
2
2
2
2
21
1
:
:
:30
0
2
2
2
21
21
1
Z
21:10 Unlu
cky L
cky L
y
uke
uke
21:25
21
2
Disaster Eart
h
20:45
120
120
0
0
D
Days
Da
of
of
20:05
0
Under The Bridg
e
EN
23
5 Press the Navigation buttons to set the
sleep time.
The sleep timer can be up to 180 »
minutes, in steps of fi ve minutes. The
sleep timer is switched off if set to
zero minutes.
6 Press OK to activate the sleeptimer.
The TV switches to standby after the »
set period of time.
7 Press BACK to exit or press
(Home) to return to the home menu.
Use child and rating locks
You can prevent your children from watching
TV by locking the TV and using age ratings.
Set or change the child lock code
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Features] > [Set code]/[Change code].
The»[Set code]/[Change code] menu
appears.
5 Enter the code with the Numeric
buttons.
6 Press OK.
A message appears confi rming that »
your code is set.
7 Press BACK to exit or press
(Home) to go back to the home menu.
Tip
If you forget your code, enter ‘8888’ to •
override any existing codes.
2 Press the Navigation buttons and OK to
select and adjust:
•[Set reminder]Sets programme
reminders.
•[Clear reminder]Clears programme
reminders.
•[Change day]Sets the EPG day.
Select [Today],[Next day] or
[Previous day].
•[More info]Displays programme
information.
•[Search by genre]Searches TV
programmes by genre.
•[Scheduled reminders]Lists
programme reminders.
•[Preferred channels]Sets preferred
EPG channels.
3 Press OPTIONS to exit to the EPG
options menu.
Use timers
You can set timers to switch the TV to standby
at a specifi ed time.
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-defi ned period of time.
Tip
You can always switch off your TV earlier or •
reset the sleeptimer during the countdown.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup]
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Features] > [Sleeptimer].
The»[Sleeptimer] menu appears.
English
EN
24
4 Press the Navigation buttons to select
[Features] > [Child lock], then press .
A message appears prompting you to »
enter the child lock code.
5 Enter the child lock code with the
Numeric buttons.
6 Press the Navigation buttons to go back
one menu level to [Features] > [Parental
rating].
The»[Parental rating] menu is now
available.
Set parental ratings
You can set your TV to display only
programmes with age ratings higher than your
child’s age.
Note
Before you can set parental ratings, you have •
to enable the feature (see ‘Enable parental
ratings’ on page 24 ).
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Features] > [Parental rating].
A message appears prompting you to »
enter the child lock code.
5 Enter the child lock code with the
Numeric buttons.
6 Press the Navigation buttons to select
an age rating, then press OK to apply the
setting.
All programmes beyond the selected »
age rating are blocked.
7 Press BACK to exit or press
(Home) to go back to the home menu.
Lock or unlock the TV
Lock the TV to prevent access to all channels
and connected devices.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Features] > [Child lock] > [Lock]/
[Unlock].
A message appears prompting you to »
enter the child lock code.
5 Enter the child lock code with the
Numeric buttons.
The»[Child lock] menu appears.
6 Press the Navigation buttons to select
[Lock]/[Unlock].
7 Press OK to confi rm your choice.
All channels and connected devices are »
locked or unlocked.
8 Press BACK to exit or press
(Home) to go back to the home menu.
Enable parental ratings
Note
Parental rating is not available in all countries.•
Some digital broadcasters rate their
programmes according to age. Before you can
set parental ratings, you have to enable the
feature.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
EN
25
Note
The •[Subtitles] menu is also accessible via the
[Setup]menu (see ‘Access the setup menu’ on
page 13 ).
2 Press the Navigation buttons to select:
•[On] Enables subtitles.
•[Off] Disables subtitles.
•[On during mute] Displays subtitles
only when audio is muted.
3 Press OK.
Subtitles are enabled or disabled.»
4 Press BACK to exit or press
(Home) to go back to the home menu.
Select a subtitle language on digital TV
channels
Note
When you select a subtitle language on •
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Features] > [Subtitle language].
A list of subtitle languages appears.»
5 Press the Navigation buttons to select a
language.
6 Press OK to confi rm your choice.
The subtitle language is applied.»
Note
Select preferred subtitle languages in the •[Languages]menu . Subtitles automatically
appear in the preferred languages when
enabled.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-T
digital broadcasts. With digital broadcasts, you
can select a subtitle language.
Enable or disable subtitles on
analogue TV channels
1 Switch to an analogue TV channel.
2 Press MHEG/TELETEXT.
3 Enter the three-digit page number of the
subtitle page with the Numeric buttons.
4 Press MHEG/TELETEXT to switch off
teletext.
5 Press SUBTITLE.
The»[Subtitles] menu appears.
Note
The •[Subtitles] menu is also accessible through
the [Setup] menu.
6 Press the Navigation buttons to select:
•[On] Enables subtitles.
•[Off] Disables subtitles.
•[On during mute] Displays subtitles
only when audio is muted.
7 Press OK to confi rm your choice.
Subtitles are enabled or disabled.»
8 Press BACK to exit or press
(Home) to go back to the home menu.
Note
Repeat this procedure to enable subtitles on •
each analogue channel.
If EasyLink is enabled, subtitles are not
•
displayed when [On during mute] is selected
(see ‘Enable or disable EasyLink’ on page 43 ).
Enable or disable subtitles on digital
TV channels
1 Press SUBTITLE.
The»[Subtitles] menu appears.
English
EN
26
4 Press the Navigation buttons to select
[Installation] > [Clock] > [Auto clock
mode].
The»[Auto clock mode] menu
appears.
5 Press the Navigation buttons to select
[Automatic] or [Manual].
6 Press OK to confi rm your choice.
The clock mode is set.»
Enable or disable daylight saving
If clock mode is set to [Manual], enable or
disable daylight saving if required for your time
zone.
1 In the [Clock] menu, press the
Navigation buttons to select [Daylight
saving].
The»[Daylight saving] menu appears.
2 Press the Navigation buttons to select
[Daylight saving time] or [Standard time].
3 Press OK to confi rm your choice.
Daylight saving is enabled or disabled »
for your time zone.
View photos, play music and
watch video from a USB
storage device
Caution
Philips is not responsible if the USB storage •
device is not supported nor is it responsible
for damage or loss of data from the device.
Your TV is fi tted with a USB connector that
enables you to view photos, listen to music or
watch movies stored on a USB storage device.
Use the TV clock
You can display a clock on the TV screen. The
clock displays the current time using time data
received from your TV service operator.
Display the TV clock
You can display a clock on the TV screen,
displaying the current time.
1 When watching TV, press OPTIONS.
The options menu appears.»
2 Press the Navigation buttons to select
[Clock].
3 Press OK to confi rm your choice.
The clock displays on the TV screen.»
Note
To disable the clock, repeat the procedure •
above.
Tip
The clock is also accessible via the •[Setup]menu (see ‘Access the setup menu’ on
page 13 ).
Change the clock mode
By default, the clock mode is set to
[Automatic], syncing the TV clock to
Coordinated Universal Time (UTC). If your
TV cannot receive UTC transmissions, set
the clock mode to [Manual]. If clock mode is
[Manual], time data is based on your current
time zone (see ‘Step 1 Select your system’ on
page 33) and daylight saving conditions (see
‘Enable or disable daylight saving’ on page 26).
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
EN
27
Change slideshow settings
1 When viewing a slideshow, press
OPTIONS.
The options menu appears.»
2 Press the Navigation buttons to select
and adjust:
•[Rotate] Rotates a picture.
•[Repeat] Repeats the slideshow.
•[Shuffl e on] Displays pictures in the
slideshow at random.
•[Shuffl e off] Disables random display
of pictures in the slideshow.
•[Slideshow speed] Sets the amount
of time that a picture is shown.
•[Slideshow transition] Sets the
transition from one picture to the
next.
3 Press OK to confi rm your choice.
The slideshow setting is applied.»
Listen to music
1 In the USB content browser, press the
Navigation buttons to select a song.
2 Press OK.
The song starts to play in the music »
player.
3 Press:
•P +/- to skip to the next or previous
song.
•/ to fast-forward or rewind a
song.
• to play or pause a song.
4 Press or OK to stop play and exit to
the USB content browser.
Connect a USB storage device and
enter the content browser
1 While the TV is on, connect the USB
device to the USB port on the side of
your TV .
The USB content browser appears.»
Note
The USB content browser is also accessible by •
selecting [Browse USB] in the home menu.
If you connect multiple USB storage devices
•
via a USB hub, a message appears prompting
you to select a device. Press the Navigation
buttons to select the device, then press OK
to confi rm.
2 To exit from the USB content browser,
press (HOME).
The home menu appears.»
Watch a slideshow of your photos
1 In the USB content browser, press the
Navigation buttons to select a photo.
2 Press or OK.
A slideshow begins from the selected »
image.
3 Press
• to pause the slideshow.
•/ , / or P +/- to go back or
move forward to the next image.
•to stop the slideshow and return
to the USB browser.
Music
Coltr
Coltr
Coltr
a
ane
a
R
e
d
E
yes
Photo
Photo
s
Mi
Mi
Miles
iles
Drivi
vi
ng al
ong t
o
he A.
.
Video
deo
deo
deo
s
s
s
Can
n
n
n
n
Can
Can
n
n
Can
n
n
n
Can
n
n
o
dile
T
Tears
Croco
co
Cr
C
l
l
l
l
y Bre
y Bre
y Bre
y Br
aking
aking
Eve
Eve.
.
B
Ba
ar
ar
rel
B
B
rel
Ba
Ba
ar
rel
Ba
ar
rel
Ph
Ph
Pharo
Pharo
Pharo
P
haro
hS
hS
ah Sa
a
ah Sa
ah Sa
a
ah Sa
n
n
n..
..
.
n.
t
t
Sk
S
Sk
Sk
Skint
kint
it
kint
Antip
ntip
tip
ti
op
C
on..
Space
S
is the Plac
e
MinimMinim
im
um Ma
um Ma
um Ma
um Ma
.
.
.
..
Livin
n
n
gfor
gfor
gfor
g for
the
the
the
the
City
City
City
A Tri
be Ca
be Ca
lled
d
d
Logan
English
EN
28
Disconnect a USB storage device
Caution
Follow this procedure to avoid damage to your •
USB storage device.
1 Press (HOME) to exit the USB content
browser.
2 Wait fi ve seconds before disconnecting
the USB storage device.
Listen to digital radio
channels
If digital broadcasting is available, digital radio
channels are installed automatically during
installation.
1 When watching TV, press OK.
The channel grid appears.»
2 Press OPTIONS.
The options menu appears.»
3 Press the Navigation buttons to select
[Select list].
The»[Select list] menu appears.
4 Press the Navigation buttons to select
[Radio].
5 Press OK.
A list of available digital radio channels »
appears in the channel grid.
6 Press the Navigation buttons to select a
radio channel.
7 Press OK.
The selected digital radio channel plays »
through the TV speakers.
Change music settings
1 When in the music player, press
OPTIONS.
The options menu appears.»
2 Press the Navigation buttons to select
and adjust:
•[Repeat] Repeats a song or an
album.
•[Shuffl e on]/[Shuffl e off] Enables or
disables random play of songs.
3 Press OK to confi rm your choice.
The music setting is applied.»
Watch video
1 In the USB content browser, press the
Navigation buttons to select a video.
2 Press OK.
The video starts to play in the video »
player.
3 Press:
•P +/- to skip to the next or previous
video.
•/ to fast-forward or rewind a
video.
• to play or pause a video.
4 Press or OK to stop play and exit to
the USB content browser.
Change video settings
1 When in the video player, press
OPTIONS.
The options menu appears.»
2 Press the Navigation buttons to select
and adjust:
•[Small screen] Plays video in a small
screen.
•[Full screen] Plays video across the
whole screen.
•[Repeat]Repeats a video.
•[Shuffl e on]/[Shuffl e off] Enables or
disables random play of videos.
3 Press OK to confi rm the setting change.
EN
29
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Software update] > [Current software
info].
5 Press OK.
The version of the current software is »
displayed.
Update software (from website)
Before performing this procedure be sure to:
Set aside some time to complete the •
entire update.
Have available a USB storage device with •
at least 256MB of storage space.
Have access to a computer with a USB •
port and internet access.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Software update] > [Update now].
5 Press OK.
The update assistant starts. Follow the »
on-screen instructions to complete the
update.
Use Scenea
Activate Scenea
You can use Scenea to display a picture as
wallpaper on your TV. Make sure that the
location of your TV is set to [Home] mode.
1 Press .
2 Select [Scenea] , then press OK.
The default or pre-loaded picture is »
displayed.
Note
Note: If the sleep timer is off, the wallpaper •
is displayed for 240 minutes. Otherwise, it is
displayed for the duration of the sleep timer
(see ‘Automatically switch the TV to standby
(sleep timer)’ on page 23 ).
Set a picture as Scenea
Note
The fi le size of the picture must not be more •
than 1MB.
1 Connect the USB storage device to the
TV.
2 Select [Browse USB], then press OK.
3 Select a picture, then press .
4 Select [Set as Scenea], then press OK.
5 Select [Yes], then press OK.
6 Press any key to exit Scenea.
English
EN
30
5 Press the Navigation buttons to select
and change:
•[Location] Optimises TV settings for
your location - home or shop.
•[Volume bar] Displays the volume
bar when you adjust the volume.
•[Channel information] Displays
information about the TV channel
every time you switch channels.
•[EasyLink] Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
•[EasyLink Remote Control] When
EasyLink is enabled, allows remote
control key forwarding.
•[Pixel Plus link] When EasyLink is
enabled, automatically applies the
best Pixel Plus setting if there is
more than one (for example, if both
your TV and DVD player support
Pixel Plus).
•[LightGuide brightness] Sets the
brightness of the front LED indicator
or LightGuide.
•[Teletext 2.5] Enables or disables
Teletex t 2.5.
6 Press OK.
The TV preference is applied.»
Location
LanguLangu
agesages
Chann
a
el install
at
t
ion
Volum
Vl
Volum
Volum
o
Volum
Volum
V
ebar
ebar
eb
e bar
e
Vl
Vl
Vl
lb
Chan
a
an
ann
el in
el in
el in
l i
el in
i
forma
forma
forma
orma
forma
forma
tion
tion
tion
tion
n
EasyL
yL
ink
ink
n
k
k
k
Decod
Decod
Decod
e
Decod
er
er
r
EasyLEasyL
ink
ink
Remot
Remot
e Cone Con
Con
Con
on
trol
trol
trol
trol
trol
Pixel
l
Plus
lus
u
us
us
link
Light
ight
Guide
ide
de
brig
bi
b
b
brig
b
htnes
htnes
htn
htn
tn
s
s
s
Telet
ext 2
.5
5
Clock
ock
Shop
p
Home
Facto
cto
t
t
t
ry re
ry r
set
set
Preferences
Update software (digital broadcasts)
(Only available in some countries) If available,
your TV can receive software updates via
digital broadcasts.
If an update is available, a message appears
prompting you to update the software. We
strongly recommend that you update the
software when prompted.
Follow the instructions below to update the
software at a later stage.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Software update] > [Local updates].
5 Press OK.
The TV searches for available software »
updates via digital broadcasts.
Change TV preferences
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The»[Setup] menu appears.
4 Press the Navigation buttons to select
[Installation] > [Preferences].
The»[Preferences] menu appears.
EN
31
Start a TV demo
(Not supported on MHEG channels)
1 When watching TV, press DEMO.
The demo menu appears.»
2 Press the Navigation buttons to select a
demo.
3 Press OK to start the demo.
4 Press DEMO or BACK to exit the
demo.
Reset the TV to factory
settings
Resetting your TV to factory settings restores
default picture and sound settings. Channel
installation settings remain the same.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
The»[Setup] menu appears.
3 Press the Navigation buttons to select
[Installation] > [Factory reset].
4 Press OK.
TV settings are reset back to the »
factory default.
English
EN
32
Caution
Leave •[Settings] unchanged unless your
DVB-C provider supplies values for [Network
frequency],[Network ID] or [Symbol rate].
Setting
•[Frequency scan] to [Full scan] can
extend installation time signifi cantly.
Note
If you have access to DVB-T and DVB-C, and •
want to view channels from both networks,
you must perform channel installation twice
— once for DVB-T and once for DVB-C.
Select [Antenna] to install DVB-T channels and
select [Cable] to install DVB-C channels.
To switch between DVB-T and DVB-C
•
channels (see ‘Access DVB-C and DVB-T
channel networks’ on page 33).
1 Press OK.
Follow the onscreen instructions to »
complete channel installation. When
channel installation is complete,
[Done] is selected and a list of installed
channels appears.
2 Press OK to confi rm your choice.
The TV exits to the »[Channel
installation] menu.
Tip
When digital TV channels are found, the list of •
installed channels may display empty channel
numbers. You can rename, reorder or uninstall
stored channels as described below.
Select Update channels
to update your current
channel list. Select Re-
install channels to search
and store all channels
again.
Update channels
Re-install channels
6 Install channels
The fi rst time you set up your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fi ne tune channels.
Automatically install channels
This section describes how to search and store
channels automatically.
Install channels
Your TV searches and stores all available
digital and analogue TV channels as well as all
available digital radio channels.
1 In the [Channel installation] menu,
press the Navigation buttons to select
[Automatic installation].
2 Press OK.
A message appears prompting you to »
start channel installation.
3 Press the Navigation buttons to select
[Start].
4 Press OK.
The channel update screen appears, »
with [Re-install channels] selected.
Channel installation
Automatic installation
Prefe
Pr
P
rence
ence
nce
nce
s
s
s
s
Langu
ages
Chann
C
Chann
Chann
el up
el up
e
e
date
date
messa
messa
ge
ge
Stan
Sta
and
nd
by chby ch
y ch
ch
annel
annel
annel
annel
upda
upda
upda
upda
t
te
te
Facto
cto
t
ry re
r
set
s
Digital: Reception test
Manual Ins
ta...
Decoder
Clock
yp
Update your current channel list or Re-install all channels.
Analo
gue:
M
Cancel Start
EN
33
Manually install channels
This section describes how to search and store
analogue TV channels manually.
Step 1 Select your system
Note
Skip this step if your system settings are •
correct.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
The»[Setup] menu appears.
3 Press the Navigation buttons to select
[Installation] > [Channel installation]
>[Analogue: Manual installation] >
[System].
4 Press OK.
A list of regional systems appears.»
5 Press the Navigation buttons to select
your country or region.
6 Press OK to confi rm your choice.
The selected country or region is »
applied.
Access DVB-C and DVB-T channel
networks
This option appears only if your country
supports DVB-C (Digital Video Broadcasting-
Cable). If you have installed both DVB-C and
DVB-T channels, you have to switch to the
respective network to watch channels on that
network.
1 When watching TV, press ( Home).
The home menu appears.»
2 Press the Navigation buttons to select
[Setup].
The»[Setup] menu appears.
3 Press the Navigation buttons to select
[Installation] > [Channel installation] >
[Antenna or Cable DVB] > [Antenna] or
[Cable].
Select •[Antenna] to access DVB-
T (Digital Video Broadcasting-
Terrestrial) channels.
Select •[Cable] to access DVB-C
(Digital Video Broadcasting-Cable)
channels.
4 Press OK to confi rm your choice.
5 Press BACK to exit.
The TV switches to the selected »
network.
English
EN
34
Fine-tune analogue channels
You can fi ne tune analog channels manually
when reception is poor.
1 When watching TV, select the channel to
fi ne-tune.
2 Press ( Home).
The home menu appears.»
3 Press the Navigation buttons to select
[Setup].
4 Press OK.
The»[Setup] menu appears.
5 Press the Navigation buttons to select
[Installation] > [Channel installation] >
[Analogue: Manual installation] > [Fine
tune].
6 Press OK.
The»[Fine tune] menu appears.
7 Press the Navigation buttons or Numeric
buttons to manually enter the channel
frequency.
8 When the correct channel frequency is
selected, press the Navigation buttons to
select [Done], then press OK.
The»[Analogue: Manual installation]
menu appears.
9 Press the Navigation buttons to select
[Store current channel] to store the new
channel under the current channel.
10 Press OK to confi rm your choice.
Step 2 Search and store new TV
channels
1 In the [Analogue: Manual installation]
menu, press the Navigation buttons to
select [Find channel].
2 Press OK.
The»[Find channel] menu appears.
3 Press:
The • Navigation buttons or Numeric
buttons to manually enter the
channel frequency.
The • Navigation buttons to select
[Search next], then press OK to
automatically search for the next
channel.
4 When the correct channel frequency is
selected, press the Navigation buttons to
select [Done].
5 Press OK.
The»[Analogue: Manual installation]
menu appears.
6 Press the Navigation buttons to select
[Store current channel] to store the new
channel under the current channel; or
[Store as new channel] to store the new
channel under a new channel number.
7 Press OK to confi rm your choice.
The channel is stored.»
5
38.00 MHz
Done Search next
EN
35
Test digital reception
You can check the quality and signal strength
of digital channels. This allows you to reposition
and test your antenna or satellite dish.
1 In the [Installation] menu, press the
Navigation buttons to select [Channel
installation] > [Digital: Reception test] >
[Search].
2 Press OK.
The»[Search] menu appears.
3 Press:
The • Navigation buttons or Numeric
buttons to manually enter the
channel frequency.
The • Navigation buttons to select
[Search], then press OK to
automatically search for the next
channel.
If the signal quality and strength
is poor, reposition the antenna or
satellite dish and retest.
4 When complete, press the Navigation
buttons to select