Table of Contents
- Important safety instructions
- Notice
- Getting started
- Features
- Included accessories
- Symbols used in this User manual
- Unpacking
- Installing the stands
- Lifting the TV set
- Removing cardboard
- Installing the remote control batteries
- Remote control
- Control panel
- Terminals
- Connecting Antenna or Cable / Satellite / IPTV set-top box
- Plugging in the AC power cord
- Selecting your connection quality
- Connecting your devices
- Initial setup
- Use your TV
- Getting more from your TV
- Useful tips
- Information
- Specifications
- Warranty
- License
Philips 50PFL6902/F7 User Manual
Displayed below is the user manual for 50PFL6902/F7 by Philips which is a product in the TVs category. This manual has pages.
Related Manuals
EN For further assistance, call the customer support service in your
country.
• To obtain assistance, contact Philips customer care center;
In the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands
1 866 202 5960
México D.F. and área metropolitana; 58 87 97 36
Interior de la republica; 01 800 839 19 89
ES Para obtener más información, llame al servicio de soporte al cliente
de su país.
• Para obtener asistencia, comuníquese con centro de atención al
cliente de Philips;
En los Estados Unidos, en Canadá, Puerto Rico o en las Islas Vírgenes
de los Estados Unidos; 1 866 202 5960
México D.F. y área metropolitana; 58 87 97 36
Interior de la republica; 01 800 839 19 89
FR Pour obtenir de l’aide supplémentaire, communiquez avec le centre
de service à la clientèle de votre pays.
• Pour obtenir de l’aide, communiquez avec le centre de service à la
clientèle Philips au;
Dans le États-Unis, au Canada, à Puerto Rico ou aux Îles Vierges
américaines; 1 866 202 5960
México D.F. et área metropolitana; 58 87 97 36
Interior de la republica; 01 800 839 19 89
Register your product and get support at
www.philips.com/welcome
EN
User manual
ES
Manual del usuario
FR
Manuel d’utilisation
65PFL6902
55PFL6902
50PFL6902
50PFL6602
Telev isions
6000 series
Contents
1 Notice ....................................................................................... 5
2 Getting started ................................................................... 8
Features 8
Included accessories 8
Symbols used in this User manual 8
Unpacking 9
Installing the stands 10
Lifting the TV set 12
Removing cardboard 12
Installing the remote control batteries 12
Remote control 13
Control panel 14
Terminals 14
Connecting Antenna or Cable / Satellite / IPTV set-top box 15
Plugging in the AC power cord 15
Selecting your connection quality 16
Connecting your devices 16
Initial setup 20
3 Use your TV ....................................................................... 22
Switching on your TV and putting it in standby mode 22
Adjusting volume 22
Switching channels 22
Watching channels from an external device 23
Access the Home menu 23
Create a list of favorite channels 24
Changing Picture format 24
TV screen information 25
Using options menu 26
USB 27
4 Getting more from your TV ...................................... 30
Picture and sound setup 31
TV settings 31
Picture 31
Sound 33
Features 34
Installation 34
Accessibility 36
Search for channels 38
Install channels 38
Channel settings 38
Channel installation 38
Child lock 39
Change PIN 40
Digital audio language 40
Mono/Stereo 40
Connect to network 41
Wireless setting 41
Wired setting 41
Network settings 42
Manual network settings 42
Connection test 44
Setting status 44
Home network 45
Wake-on-LAN(DIAL) 45
Net TV 45
Samba interactive TV settings 45
Reset network settings 45
Update software 46
Preparing for the software upgrade 46
Downloading the software 46
USB upgrade 46
Network updates 47
Software settings 47
Software 47
Wireless Screencasting 48
View photos, play music and watch videos using home
network 48
Net TV 51
Pandora operations 52
5 Useful tips ........................................................................... 53
FAQ 53
Troubleshooting tips 54
6 Information ........................................................................ 56
Glossary 56
Maintenance 56
7 Specifications .................................................................... 57
8 Warranty ............................................................................. 58
License .......................................................................................... end of book
•Displays and illustrations may differ depending on the product you purchase.
2.English
Know these safety symbols The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the apparatus’s enclosure that may be of sucient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The caution marking is located on the rear or bottom of the cabinet.
CAUTION
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.
Register Online at www.philips.com/welcome to ensure:
Register online today at www.philips.com/welcome today
to get the most benets from your purchase.
*Product safety notication *Additional benets
By registering your product, you'll receive
notication - directly from the manufacturer - in
the rare case of a product recall or safety defect.
Registering your product guarantees that you'll
receive all of the privileges to which you're
entitled, including special money-saving oers.
WARNING: To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION: Pour éviter les choc électriques,introduire la lame la plus large de la che dans la borne
correspondante de la prise et pousser jusqu’au fond.
For fastest support visit us online for chat and self service
solutions at www.philips.com/support
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer
electronics industry are committed to making home
entertainment safe and enjoyable.
• As you enjoy your television, please note that all
televisions – new and old- must be supported on
proper stands or installed according to the
manufacturer’s recommendations. Televisions that are
inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests, carts, etc., may fall
over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations
for the safe installation of your television.
• ALWAYS read and follow all instructions for proper
use of your television.
• NEVER allow children to climb on or play on the
television or the furniture on which the television is
placed.
• NEVER place the television on furniture that can
easily be used as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be
pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the
television so that they cannot be tripped over, pulled
or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional
installation if you have any doubts about your ability
to safely mount your television.
• ALWAYS use a mount that has been recommended
by the television manufacturer and has a safety
certication by an independent laboratory (such as
UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the
television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you
are mounting the television is appropriate. Some
mounts are not designed to be mounted to walls and
ceilings with steel studs or cinder block construction.
If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people
is required for a wall or ceiling mount installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE
IN YOUR HOME
• Many new television buyers move their older CRT
televisions into a secondary room after the purchase
of a at-panel television. Special care should be
made in the placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture
that is sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser
where children may be tempted to use the drawers
to climb.
• ALWAYS make sure your older CRT television does
not hang over the edge of your furniture.
3.English
I
Important safety instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
Do not defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments / accessories specied by
the manufacturer.
Use only with the cart, stand,
tripod, bracket, or table specied
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart / apparatus combination
to avoid injury from tip-over.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1 1.
12.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
13.
14.
Note to the CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, species that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
Example of antenna grounding as per NEC -
National Electric Code
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250,
PART H)
GROUND CLAMPS
Wall mount bracket kit
Brand Model # Screw dimension
65PFL6902
55PFL6902
50PFL6902
50PFL6602
SANUS F80b M6 x 1.378” (35mm)
•Your TV meets the VESA standard for wall mounting. Consult with your
local dealer for a wall mount bracket which is compatible with your TV
model.
•The recommended wall mount bracket kit (sold separately) allows the
mounting of the TV on the wall.
•For detailed information on installing the wall mount, refer to the wall
mount Instruction book.
•P&F USA is not responsible for any damage to the product or injury to
yourself or others if you elect to install the TV wall mount bracket or
mount the TV onto the bracket on your own.
•The wall mount bracket must be installed by experts.
P&F USA is not liable for these types of accidents or injuries noted
below.
•Install the wall mount bracket on a sturdy vertical wall.
•If installed onto a ceiling or slanted wall, the TV and wall mount bracket
may fall which could result in a severe injury.
•Do not use screws that are longer or shorter than their specified length.
If screws too long are used this may cause mechanical or electrical
damage inside the TV set. If screws too short are used this may cause
the TV set to fall.
•Do not fasten the screws by excessive force. This may damage the
product or cause the product to fall, leading to an injury.
•For safety reasons use 2 people to mount the TV onto a wall mounting
bracket.
•Do not mount the TV onto the wall mounting bracket while your TV is
plugged in or turned on. It may result in an electrical shock injury.
When installing the unit on the wall, allow this much space.
Top :1 1.8 inches (30cm)
Left and right side :5.9 inches (15cm)
Bottom :3.9 inches (10cm)
4.English
1 Notice
Trademarks are the property of Koninklijke Philips N.V. or their respective
owners.
P&F USA reserves the right to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed adequate for the intended use of
the system. If the product or its individual modules or procedures are used
for purposes other than those specified herein, confirmation of their
validity and suitability must be obtained. P&F USA warrants that the
material itself does not infringe any United States patents. No further
warranty is expressed or implied.
P&F USA cannot be held responsible neither for any errors in the content
of this document nor for any problems as a result of the content in this
document. Errors reported to P&F USA will be adapted and published on
the P&F USA support website as soon as possible.
Pixel characteristics
This LCD product has a high number of color pixels. Although it has
effective pixels of 99.999% or more, black dots or bright points of light
(red, green or blue) may appear constantly on the screen. This is a
structural property of the display (within common industry standards) and
is not a malfunction.
Warranty
No components are user serviceable. Do not open or remove covers to
the inside of the product. Repairs may only be done by service centers
and official repair shops. Failure to do so shall void any warranty, stated
or implied.
Any operation expressly prohibited in this manual, any adjustments or
assembly procedures not recommended or authorized in this manual
shall void the warranty.
Federal communications commission notice
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•Consult the dealer or an experienced radio or television technician for
help.
Declaration of conformity
Trade name :PHILIPS
Responsible party :P&F USA, Inc.
Model :65PFL6902, 55PFL6902, 50PFL6902,
50PFL6602
Address :PO Box 2248, Alpharetta, GA 30023-2248 U.S.A.
Telephone number :1 866 202 5960
Modifications
This apparatus may generate or use radio frequency energy. Changes or
modifications to this apparatus may cause harmful interference.
Any modifications to the apparatus must be approved by P&F USA.
The user could lose the authority to operate this apparatus if an
unauthorized change or modification is made.
Cables
Connections to this device must be made with shielded cables with
metallic RFI / EMI connector hoods to maintain compliance with FCC
Rules and regulations.
Canadian notice
CAN ICES-3 (B)/NMB-3 (B)
Analog and digital television receiving apparatus, Canada BETS-7 /
NTMR-7.
The following FCC/IC RSS applies to the wireless LAN
adapter included in this product.
FCC caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Country code statement
For product available in the USA market, only channel 1a1 1 can be
operated. Selection of other channels is not possible.
To maintain compliance with FCC RF exposure requirements, use
only belt-clips, holsters or similar accessories that do not contain
metallic components in its assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF
exposure requirements and should be avoided.
This device complies with industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
5150-5250 MHz band is restricted to indoor operations only.
High-power radars are allocated as primary users (i.e. priority users)
of the bands 5250-5350 MHz and 5650-5850 MHz and that these
radars could cause interference and/or damage to LE-LAN
devices.
Compliance with IC requirement RSS-210 A9.4.4
Data transmission is always initiated by software, which is the
passed down through the MAC, through the digital and analog
baseband, and finally to the RF chip. Several special packets are
initiated by the MAC. These are the only ways the digital baseband
portion will turn on the RF transmitter, which it then turns off at the
end of the packet. Therefore, the transmitter will be on only while
one of the aforementioned packets is being transmitted. In other
words, this device automatically discontinue transmission in case
of either absence of information to transmit or operational failure.
5.English
Positioning the TV
•Large screen TVs are heavy. 2 people are required to carry and handle
a large screen TV.
•Make sure to hold the upper and bottom
frames of the unit firmly as illustrated.
•Install the unit in a horizontal and stable
position.
•Do not install the unit in direct sunlight or in a
place subject to dust or strong vibration.
•Depending on the environment, the
temperature of this unit may increase slightly.
This is not a malfunction.
•When installing this unit in a temperate environment, avoid a place with
rapid temperature changes.
–Operating temperature: 41°F (5°C) to 104°F (40°C)
•This unit should not be used in a tropical environment as it has not been
evaluated under such conditions.
•No objects should be placed directly on or under this unit, especially
lighted candles or other flaming objects.
•Depending on your external devices, noise or disturbance of the picture
and / or sound may be generated if the unit is placed too close to them.
In this case, please ensure enough space between the external devices
and the unit.
•Do not insert the AC power cord into the power socket outlet before all
the connections are made.
•Ensure that you always have easy access to the AC power cord and
outlet to disconnect the TV from the AC outlet.
•Before you move the TV, disconnect attached cables to prevent
damage to connectors, especially the TV tuner.
•Be sure to unplug the AC power plug from the AC outlet before moving
or carrying the unit.
•When moving the TV and then setting it down, please be careful not to
pinch the AC power cord under the unit.
•Do not place this unit in an area where it may be exposed to water, oil
or grease such as:
near a bathtub, basin, kitchen sink, washing tub, swimming pool, kitchen
exhaust fan, etc., or in a damp basement.
Regulatory notices
WARNING :To prevent injury, this apparatus must be securely attached
to the furniture / wall in accordance with the instructions.
Tipping, shaking or rocking the unit may cause injury /
death.
WARNING :Never place a TV in an unstable location. A TV may fall,
causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple
precautions such as:
–Using cabinets or stands recommended by the
manufacturer of the TV.
–Only using furniture that can safely support the TV.
–Ensuring the TV is not overhanging the edge of the
supporting furniture.
–Not placing the TV on tall furniture (for example,
cupboards or bookcases) without anchoring both the
furniture and the TV to a suitable support.
–Not placing the TV on cloth or other materials that may
be located between the TV and supporting furniture.
–Educating the children about the dangers of climbing
on furniture to reach the TV or its controls.
If your existing TV is being retained and relocated, the same
considerations as above should be applied.
Do not place the unit on the furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing or climbing on it. A falling unit
can cause serious injury or even death.
In order to avoid interruption of ventilation, this unit should not be placed
in built-in equipment such as a book cabinet, rack, etc., and the vents of
this unit should not be covered with anything such as a tablecloth, curtain,
newspaper, etc. Make sure that there is enough ventilation space
(4inches / 10cm or more) around this unit.
Press to turn the unit on and go into standby mode. To completely turn
off the unit, you must unplug the AC power plug from the AC power
outlet.
Disconnect the AC power plug to shut the unit off when trouble is found
or not in use. The AC plug shall remain readily available.
AC power plug
Never use a gas duster on this TV.
The gas trapped inside of this unit may cause ignition and explosion.
Environmental care
The packaging of this product is intended to be recycled.
Contact your local authorities for information about how to recycle the
packaging.
For product recycling information, please visit - www.recycle.philips.com
End of life directives
Philips pays a lot of attention to produce environmental-friendly products
in green focal areas. Your new TV contains materials which can be
recycled and reused. At the end of its life, specialized companies can
dismantle the discarded TV to concentrate the reusable materials and to
minimize the amount of materials to be disposed of. Please ensure you
dispose of your old TV according to local regulations.
Batteries usage
CAUTION :Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING :Batteries (battery pack or battery installed) should not be
exposed to excessive heat such as sunshine, fire or the like.
•Do not mix old and new batteries.
•Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad,
ni-mh,Li-ion, etc.) batteries.
Disposal of used batteries
The batteries included do not contain the heavy metals mercury and
cadmium, however in certain localities, disposing batteries with
household waste is not permitted. Please ensure you dispose of
batteries according to local regulations.
Preparing to move / ship the unit
Please pack the unit properly by following the diagram on the carton (as
noted below).
•To avoid damage to the screen, do not pack the stand on the same side
as the TV screen, refer to the illustration above.
6.English
Copyright
All other registered and unregistered trademarks are the property of their
respective owners.
The terms HDMI and HDMI High-
Definition Multimedia Interface, and
the HDMI Logo are trademarks or
registered trademarks of HDMI
Licensing Administrator, Inc. in the
United States and other countries.
Manufactured under license from
Dolby Laboratories. Dolby, Dolby
Vision, Dolby Audio, and the double-D
symbol are trademarks of Dolby
Laboratories.
Sonic Emotion and the Sonic Emotion
logo symbol are registered trademarks
of sonic emotion ag.
Netflix is available in certain countries.
Streaming membership required. More
information at www.netflix.com.
VUDU™ is a trademark of VUDU, Inc.
YouTube and the YouTube logo are
trademarks of Google Inc.
PANDORA, the PANDORA logo, and
the Pandora trade dress are
trademarks or registered trademarks of
Pandora Media, Inc. Used with
permission.
CinemaNow and the CinemaNow logo
are trademarks of BestBuy Stores L.P.
and BestBuy Canada LTD.
Hotlist, Samba, Samba TV and
associated logos are trademarks of
Free Stream Media Corp.
Portions of this software are copyright © The FreeType Project
(www.freetype.org).
The American Academy of Pediatrics discourages television viewing for
children younger than two years of age.
Some features may require an always-on broadband internet
connection, firmware update and/or a minimum bandwidth. Internet
services vary by location.
P&F USA Inc. / P&F MEXICANA, S.A.de C.V. do not warrant access to
the portal or to any of the services, content, software and advertising.
P&F USA Inc./P&F MEXICANA, S.A. de C.V. or third party content/
service providers may, in their sole discretion, add or remove access to
any specific services, content, software and advertising at any time.
Although P&F USA Inc. / P&F MEXICANA, S.A. de C.V. will strive to
provide a good selection of services, content or software, P&F USA Inc./
P&F MEXICANA, S.A. de C.V. do not warrant continued access to any
specific services, and content or software.
P&F USA Inc. / P&F MEXICANA S.A. de C.V. do not warrant Wireless
Screencasting compatibility with all source devices such as
smartphones, tablets, laptops, etc. due to large variability in hardware,
firmware, drivers, software and implementation of wireless casting
applications on these source devices. Although P&F USA Inc. / P&F
MEXICANA S.A. de C.V. will strive to enhance compatibility and
performance across a range of source devices, P&F USA Inc. / P&F
MEXICANA S.A. de C.V. do not warrant compatibility with specific
source devices.
7.English
2 Getting started
Features
•DTV / Analog TV / CATV
You can use your remote control to select channels which are broadcast in digital format and
conventional analog format. Also, cable and satellite subscribers can access their TV channels.
•Information display
You can display on the TV screen the title, contents (DTV only) and other information on the current
program.
•Autoprogram
This unit automatically scans and memorizes channels available in your area, eliminating difficult
setup procedures.
•Net TV
This unit lets you enjoy internet services. Use the remote control to browse the Net TV pages. You
can play movies and much more, all from your TV screen.
•Child lock
This feature allows you to block children’s access to inappropriate programs.
•Closed caption decoder
Built-in closed caption decoder displays text for closed caption supported programs.
•MTS / SAP tuner
Audio can be selected from the remote control.
•Auto standby
If there is no input signal and no operation for 15 minutes, the unit will go into standby mode
automatically.
•Sleep timer
You can set the unit to go into standby mode after a specific amount of time.
•Choices for on-screen language
Select your on-screen language: English, Spanish or French.
•Stereo sound function
•PLL frequency synthesized tuning
Provides free and easy channel selection and lets you tune directly to any channel using the
number and decimal point “•” keys on the remote control.
•Various adjustments for picture and sound
Customizes picture quality suitable for your room and sets your sound preference.
•EasyLink via HDMI link
EasyLink allows your other HDMI link devices to be controlled by the HDMI cable connected to
your TV.
•HDMI input
•HDMI-DVI input
If your video device has a DVI output jack, use an HDMI-DVI conversion cable to connect the
unit.
•Component video input
•AV input
Audio and video input from an external device.
•USB terminal
The picture, music and video files stored on a USB memory stick can be played back on this unit.
•Digital audio output
•Headphone audio output
Headphone 3.5mm stereo jack for personal listening.
Included accessories
CAUTION: READ THIS FIRST
4
4
4
65PFL6902
55PFL6902
50PFL6902
50PFL6602
65”(65PFL6902)
55”(55PFL6902)
50”(50PFL6902)
50”(50PFL6602)
AAA
AAA
Quick start guideUser manual Caution sheet
TV base and Screws
(AAA, 1.5V x 2)
Remote control
and Batteries
SizeQuantityModel
Screws packed with this unit.
M4 x 0.984”(25mm)
M4 x 0.709”(18mm)
M4 x 0.630”(16mm)
Note(s)
•If you lose the screws, please purchase the above-mentioned Phillips head screws at your local
store.
•If you need to replace these accessories, please refer to the part name or No. with the illustrations
and call our toll free customer support line found on the cover of this User manual.
W
When using a universal remote control to operate this unit.
•Make sure the component code on your universal remote control is set to our brand. Refer to
the instruction book accompanying your remote control for more details.
•We do not guarantee 100% interoperability with all universal remote controls.
Symbols used in this User manual
The following is the description for the symbols used in this User manual.
Description refers to:
Digital TV operation
Cable / NTSC (Analog) TV operation
•If neither symbol appears, the operation is applicable to both.
8.English
Continued on next page.
Unpacking
It is recommended that two or more people remove the TV set from the
box. Be careful not to injure your fingers and keep children away during
assembly.
(65PFL6902)
1Open the top flaps of the box.
2Remove all accessories.
Caution(s)
•DO NOT take the TV set out of the box yet.
3Remove the packing joints from the box.
4Remove the outer slipbox with care.
5Support the top of the TV set with a hand to prevent the TV from
falling.
6Unhinge the retaining tabs and unfold the left and right side of the
bottom packaging.
9.English
Continued on next page.
(55PFL6902, 50PFL6902, 50PFL6602)
1Open the top flaps of the box.
2Remove all accessories.
3Prepare a table and cover the top of it with a table cloth, blanket or
such to avoid damage to the TV set. Support both sides of the TV set
and, move it onto the table.
4Carefully lay the TV set, with the screen side down, on the table so
as not to deform or damage Decoration plate of the bottom of the
unit.
Protect
the plate
with care
Installing the stands
(65PFL6902)
1Remove both of the bottom polystyrene foam bases. Carefully tear
the plastic bag until the bottom corner of the TV is exposed.
•Support the top of the TV set at all times to prevent the TV from
falling.
Caution(s)
•Before installing the matching stand, remove the protective cardboard and carefully peel away
the film from the area so that it will not get stuck between the unit and the stand.
2Lift up one side of the TV approx. 1 inch (2.5 cm) and insert the
matching stand upward until it fits the main unit.
3Fasten the matching stand to the TV with 2 screws (included).
2 screws
required
4In the same manner as step 2, install the other stand.
10 .English
Continued on next page.
5Fasten the other stand to the TV with 2 screws (included).
2 screws
required
6Both stands should now be securely fastened.
(55PFL6902, 50PFL6902, 50PFL6602)
1Remove the tape on the bottom of the TV set and the plastic bag.
2Fasten the matching stand to the TV with 2 screws (included). While
fastening the screws, hold the stand to prevent it from falling.
Caution(s)
•Before installing the matching stand, remove the protective cardboard and carefully peel away
the film from the area so that it will not get stuck between the unit and the stand.
2 screws
required
3Fasten the other stand to the TV with 2 screws (included). While
fastening the screws, hold the stand to prevent it from falling.
2 screws
required
4Both stands should now be securely fastened.
Note(s)
•A wide open space is recommended for assembly.
•A Phillips-head screwdriver is required to fasten the stands to the TV set.
•When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly
attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.
•To remove the stand from this unit, unscrew the Phillips-head screws by reversing the
procedure. Be careful not to drop the stand when you remove it.
11 .English
Continued on next page.
Lifting the TV set
Carefully lift the TV set as shown in the illustration and place it onto a
stable, level surface.
Removing cardboard
Remove the cardboard attached to the screen. You are now ready to set
up and enjoy your Philips TV.
Installing the remote control batteries
1Slide the battery cover off the back of the remote control.
2Insert the two included batteries (AAA, 1.5V). Be sure the + and – ends
of the batteries line up with the markings inside the case.
3Slide the cover back into position.
Note(s)
•Remove the batteries if not using the remote control for an extended period of time.
12 .English
Continued on next page.
Remote control
q
r
u
t
s
p
o
b
a
c
d
g
e
h
l
m
n
j
k
f
i
(POWER)
Turns the TV on from standby or off to standby.
VUDU
Access directly to VUDU.
EasyLink buttons
/ :Searches backward or forward through the disc.
.:Starts, pauses or resumes playback.
.:Stops the disc playback.
Note(s)
•Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)
compliant.
YouTube
Access directly to YouTube.
SAP
Selects audio mode (MONO / STEREO / SAP) / audio language.
(Home)
Displays the main menu.
!INFO
Displays information about the current program.
"OK
Press to decide the command of setting when the Home menu is
displayed.
# (NAVIGATION buttons)
Moves the cursor, selects the on-screen menu items.
$OPTIONS
Displays a list of menu items applicable to the highlighted object or
screen.
%SOURCE
Selects connected devices.
&CH + / –
Selects a channel.
'COLOR buttons
Works as direct access to user specified net apps.
(0 - 9 (NUMBER buttons)
Used to enter a channel / program number.
• (DOT) :Use with 0-9 to select digital channels.
For example, to enter 2.1, press
PREV.CH :Returns to the previously viewed channel.
) (MUTE)
Turns the sound on and off.
*VOL + / –
Adjusts the volume.
+BACK
Returns to the previous menu operation.
,FORMAT
Adjusts the picture size on the TV screen.
-CC
Selects closed caption settings (Off, On, CC w/ mute).
.NETTV
Access to Net TV menu directly.
/NETFLIX
Access directly to Netflix.
13 .English
Continued on next page.
Control panel
f
cde
a
b
Remote control sensor
Receives IR signal from remote control.
CH + / –
Selects a channel. In the menu screen, moves the cursor
up (+) / down (–).
(POWER)
Turns the TV on or switches the TV into standby mode.
MENU
Opens the main on-screen menu.
SOURCE
Selects connected devices.
VOL + / –
Adjusts the volume. In the menu screen, moves the cursor
left (+) / right (–).
VOL + :Volume up
VOL – :Volume down
Terminals
m
n
g
k
h
j
l
i
!75 ohm cable / Antenna connection
Signal input from an antenna or cable / satellite set-top boxes.
"Analog audio (L/R) input jacks
Connect analog audio signals from;
–HDMI-DVI / Analog audio (L/R) jacks signal
–Component video / Analog audio (L/R) jacks signal
–Composite video / Analog audio (L/R) jacks signal
–PC connection / Analog audio (L/R) jacks signal with stereo mini 3.
5mm plug audio cable on PC
#Digital audio output jack
Digital audio (S/PDIF) output to home theaters and other digital audio
systems.
$Component (Y/Pb/Pr) / Composite video (VIDEO) input jack(s) for
VIDEO
Composite video input (VIDEO) jack is a shared jack with component
video input (Y) jack. Green / Yellow color orientation depends on
model.
%Ethernet port
For internet connection using an Ethernet cable with an RJ-45
connector.
&HDMI input jack(s)
Digital audio and video input from high definition digital devices such
as DVD / Blu-ray disc players, cable / satellite set-top boxes, PC’s,
etc.
*For HDMI 2 only
In addition to normal HDMI and HDMI-DVI functionality, it outputs
TV audio to an HDMI-ARC-compliant device, such as a home
theater system.
'Headphone audio output jack
Headphone 3.5mm stereo jack for personal listening.
(USB terminal
Data input from USB memory stick only.
Do not connect any device to this terminal such as digital camera,
keyboard, mouse, etc.
14 .English
Continued on next page.
Connecting Antenna or Cable / Satellite /
IPTV set-top box
Be sure your antenna or another device is connected properly before
plugging in the AC power cord.
If connecting to an antenna through an RF cable
Any DTV programs that are broadcast in your area can be received for
free through an antenna connection.
IN
IN
OUT
OUT
RF cable
RF cable
RF cable
Antenna
Antenna
Antenna
Cable
Cable
Cable
If connecting Cable / Satellite / IPTV set-top box using an RF
cable
If the TV is connected to a cable or set-top box via a coaxial connection,
set the TV to channel 3/4 or the channel specified by the service
provider.
IN
IN Antenna
Antenna
Antenna
Set-top box
Set-top box
Set-top box
RF cable
RF cable
RF cable
OUT
OUT
OUT
IN
IN
RF cable
RF cable
RF cable
If connecting Cable / Satellite / IPTV set-top box using an HDMI
cable
If the TV is connected to a cable / satellite set-top box via an HDMI cable,
make sure you select the correct source by using SOURCE.
IN
IN
IN
IN
OUT
Set-top box
RF cable
HDMI cable
HDMI cable
HDMI cable
If connecting Cable / Satellite / IPTV set-top box using
component video input
If the TV is connected to a cable / satellite set-top box via component
video input, make sure you select the correct component video source
by using SOURCE.
Set-top box
Set-top box
Set-top box
IN
IN
RF cable
RF cable
RF cable
OUT
OUT
OUT
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
IN
IN
OUT
OUT
OUT
Audio (L/R) cables
Audio (L/R) cables
Audio (L/R) cables
IN
IN
Connecting a Cable / Satellite / IPTV set-top box, Blu-
ray disc / DVD recorder via composite connectors and
analog audio
Do not place your recorder too close to the screen because some recorders
can be susceptible to harmful interference from the TV.
Cable
OUT
RF cable
IN
IN
IN
OUT
IN
OUT
IN
IN
IN
OUTOUT
RF cable IN
Satellite
IN
Cable
Video +
Audio(L/R)
cables
Video + Audio(L/R)
cables
Video + Audio(L/R)
cables
Video + Audio(L/R)
cables
Blu-ray disc / DVD recorder
Set-top box
Note(s)
•If you have any question about the DTV’s antenna, visit www.antennaweb.org for further
information.
•Depending on your antenna system, you may need different types of combiners (mixers) or
separators (splitters) for HDTV signal. The minimum RF bandpass on these devices is 2,000MHz
or 2GHz.
•For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the
antenna input jack before moving the unit.
•If you did use an antenna to receive analog TV, it should also work for DTV reception. Outdoor
or attic antennas will be more effective than a set-top box or inside antenna.
•To turn on your reception source easily between antenna and cable, install an antenna
selector.
•If you are not receiving a signal from your cable service, contact the cable provider.
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet after
all the necessary connections are made.
Caution(s)
•Connect the analog audio signal cables from the external device to the analog audio L/R input
jacks.
•If you have an amplifier, connect the HDMI cable to the HDMI input via your amplifier.
Note(s)
•Each time you plug in the AC power cord, no operations will be performed for several seconds.
This is not a malfunction.
15 .English
Continued on next page.
No included cables are used with these connections:
•Please purchase the necessary cables at your local store.
B
Before you connect the AC power cord:
Be sure other devices are connected properly before plugging in the AC
power cord.
Selecting your connection quality
HDMI - Highest quality
Supports high-definition digital signals and gives highest picture and
sound quality. Video and audio signals are combined in one cable. You
must use HDMI for full high-definition video and to enable
EasyLink(HDMI CEC).
Note(s)
•Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form of
digital rights management that protects high-definition content in Blu-ray discs or DVDs.
•The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows output of
TV audio to an HDMI-ARC-compliant device.
Component (Y Pb Pr) - High quality
Supports high-definition analog signals but gives lower picture quality
than HDMI. Component (Y/Pb/Pr) video cables combine red / green /
blue video cables with red / white audio (L/R) cables. Match the cable
colors when you connect to the TV.
Composite - Basic quality
For analog connections. Composite video / Audio analog cable usually
combine a yellow video cable with red / white audio (L/R) cables. With
this unit, yellow cable must be connected to Y (green) jack on the
component video input jacks.
Connecting your devices
HDMI digital connection
HDMI connection offers the highest picture quality.
HDMI (High-Definition Multimedia Interface) transports high-definition
digital video and multi-channel digital audio through a single cable.
HD game console
or
Blu-ray disc / DVD player
or
Set-top box
OUT
IN
IN
IN
HDMI cable
HDMI cable
HDMI cable
Note(s)
•If there are issues with picture/color and/or sound when connecting an external device using
the HDMI port, please try switching the HDMI mode. (Refer to HDMI mode p. 35)
•Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
•Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is
recommended for the better compatibility.
•The unit accepts 480i / 480p / 720p / 1080i, 1080p, 2160p 24/30/60Hz of video signals, 32kHz/
44.1kHz and 48kHz of audio signals.
•This unit accepts LPCM, AC-3, DD+ audio signal.
•This unit accepts only signals in compliance with EIA861.
HDMI-DVI connection
This unit can be connected to a device that has a DVI terminal.
Use an HDMI-DVI conversion cable for this connection and it requires
audio cable for analog audio signal as well.
Cable receiver or
set-top box with
the DVI output jack
OUT
HDMI-DVI
conversion cable
HDMI-DVI
conversion cable
HDMI-DVI
conversion cable
IN
IN
IN
OUT
Audio (L/R) cables
IN
IN
IN
Note(s)
•Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
•Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is
recommended for the better compatibility.
•The unit accepts 480i, 480p, 720p, 1080i, 1080p and 2160p video signals.
•HDMI-DVI connection requires separate audio connections as well and the audio signals are
output as analog (L/R) audio.
•DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
16 .English
Continued on next page.
HDMI-ARC connection
HDMI-ARC allows you to use EasyLink to output TV audio directly to a
connected audio device, without the need for an additional digital audio
cable.
OUT
HDMI cable
HDMI cable
HDMI cable
HDMI 2 IN only
HDMI 2 IN only
HDMI 2 IN only
Digital home theater
amplier that supports
HDMI-ARC
Note(s)
•The HDMI 2 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital
audio to an HDMI home theater system.
•Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the
device using an HDMI cable attached to HDMI-ARC connectors.
Component analog video connection
Component analog video connection offers better picture quality for
video devices connected to the unit.
If you connect to the unit’s component video (Y/Pb/Pr) input jacks,
connect analog audio cables to the analog audio (L/R) input jacks.
Blu-ray disc /
DVD recorder
Blu-ray disc /
DVD recorder
Blu-ray disc /
DVD recorder
or
or
Set-top box
Set-top box
Set-top box
OUT
OUT
OUT
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
Component (Y/Pb/Pr)
video cables
IN
IN
IN
OUT
OUT
OUT
Audio (L/R) cables
Audio (L/R) cables
Audio (L/R) cables
IN
IN
Note(s)
•The unit accepts 480i, 480p, 720p, 1080i and 1080p of video signals for this connection.
Composite analog video connection
Composite analog video connection offers standard picture quality for
video devices connected to the unit.
If you connect to the unit’s component / composite video (Y/VIDEO) input
jack (green), connect audio cables to the audio (L/R) input jacks. When
the audio is monaural, then only connect to the audio L input jack.
DVD player
DVD player
DVD player
OUT
OUT
OUT
Video + Audio(L/R) cables
Video + Audio(L/R) cables
Video + Audio(L/R) cables
Note(s)
•With this unit, yellow cable must be connected to Y (green) jack on the component video input
jacks.
•Whenever you connect to the composite video input jack (Y/VIDEO), you must disconnect the
component video input jacks (Pb and Pr). If you leave those jacks connected, it may cause an
unstable picture.
Connecting the TV to the internet using an Ethernet
cable
LAN
Internet
Internet
Internet
Network provisioning
equipment
Network provisioning
equipment
Network provisioning
equipment
Ethernet cable
Ethernet cable
Ethernet cable
Note(s)
•Please purchase shielded Ethernet cables at your local store and use them when you connect
to network equipment.
•After connecting an Ethernet cable, set up necessary network settings. Connect to network
p. 41
•Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging
the unit.
•If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
•If your telecommunications equipment (modem, etc.) has broadband router functions but there
is no vacant port, then add a hub.
•For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.
•Do not connect your PC directly to the Ethernet port of this unit.
17 .English
Continued on next page.
Connecting the TV to the internet using a wireless LAN
WLAN
LAN
Network provisioning
equipment
Ethernet
cable
Broadband router
Broadband router
Broadband router
Internet
Internet
Internet
Note(s)
•After you make the wireless connection, set up the necessary network settings. Connect to
network p. 41
•Use a wireless LAN Access Point (AP) (e.g. broadband wireless router) which supports
IEEE 802.1 1 a/b/g/n/ac. (n is recommended for stable operation of the wireless network.)
•This unit does not support Ad-hoc mode.
•Other radio devices or obstacles may cause interference to the wireless network connection.
Digital audio output connection
If you connect this unit to an external digital audio device, you can enjoy
multi-channel audio like 5.1ch digital broadcasting sound.
Use a digital audio optical cable to connect the unit to external digital
audio devices.
Digital home
theater amplier
OUT
OUT
OUT
IN
IN
Digital audio
optical cable
Digital audio
optical cable
Digital audio
optical cable
PC connection
HDMI connection
This unit can be connected to your PC that has an HDMI terminal. Use an
HDMI cable for this digital connection.
PC
PC
OUT
OUT
OUT
HDMI cable
HDMI cable
HDMI cable
IN
IN
HDMI-DVI connection
This unit can be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this video digital connection and
it requires stereo mini 3.5mm plug audio cable for analog audio signal as
well.
PC
PC
OUT
OUT
OUT
HDMI-DVI
conversion cable
HDMI-DVI
conversion cable
HDMI-DVI
conversion cable
IN
IN
IN
OUT
OUT
OUT
Stereo mini 3.5 mm plug audio cable
Stereo mini 3.5 mm plug audio cable
Stereo mini 3.5 mm plug audio cable
IN
IN
IN
18 .English
Continued on next page.
The following PC-input video signals can be displayed:
Format Resolution Refresh rate
VGA 640 x 480
60Hz
SVGA 800 x 600
XGA 1,024 x 768
WXGA 1,280 x 768
1,360 x 768
FHD 1,920 x 1,080
24/30/60Hz
UHD 3,840 x 2,160
4,096 x 2,160
Other formats or non-standard signals will not be displayed correctly.
Note(s)
•Please purchase a HDMI-DVI conversion cable that has a ferrite core.
•The following operations may reduce noise.
–Attach a ferrite core to the AC power cord of your PC.
–Unplug the AC power cord and use the built-in battery of your portable / laptop PC.
•Some HDMI cables and devices may not be compatible with the TV due to different HDMI
specifications.
•Use an HDMI cable with the HDMI logo (a certified HDMI cable). High speed HDMI cable is
recommended for the better compatibility.
•The unit accepts 480i, 480p, 720p, 1080i, 1080p and 2160p video signals only when using the
HDMI connection and HDMI-DVI connection.
•HDMI-DVI connection requires separate audio connections as well and the audio signals are
output as analog (L/R) audio.
•DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.
USB memory stick
This unit offers easy playback of picture, music and video files.
Insert the USB memory stick into the USB terminal shown below.
For a complete list of file formats and specifications supported, refer to
USB Section p. 27
Note(s)
•The unit recognizes only a USB memory stick.
•Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit.
(Not supported.)
•Always insert a USB memory stick directly to this unit.
•A USB memory stick is not included with this unit.
•We do not guarantee that all USB memory sticks can be supported by this unit.
•Be sure to keep a backup copy of the original files on your USB device before you play them
back on this unit. We have no responsibilities for damage or loss of your USB stored data.
•To protect your USB memory stick files from being erased place the write protect sliding tab in
the protect position (if available).
•When you are ready to remove a USB memory stick, set the unit to go into standby mode to
avoid any damage to your data and the unit.
•A USB memory stick that requires its own driver or the device with a special system such as
fingerprint recognition are not supported.
•This unit is not allowed to use the USB memory stick which requires an external power supply
(500mA or more).
19 .English
Continued on next page.
These operations are accessible by remote control.
Some may also be accessible by the main unit's control panel.
Initial setup
This section will guide you through the unit’s Initial setting which includes
selecting a language for your on-screen menu, country, location and
Autoprogram, which automatically scans and memorizes viewable
channels. You can also set the network connection in this setting.
B
Before you begin:
Make sure the unit is connected to an antenna or cable.
1After making all the necessary connections, press to turn on the
unit.
•It may take a few moments to turn on the unit for the first time.
•Initial setup menu appears automatically after the unit is turned on.
2Use to select the on-screen language, Voice guide, country, TV
placement and location in the middle of the TV screen, then press
OK.
•You must set Home in location setting. Otherwise, Picture and
Sound settings you adjusted will not be memorized after the unit
goes into standby mode.
3Use to select Skip or Next on network setup screen.
4Use to select Wireless or Wired, then press OK.
12
34
756
Skip
Wired
Wireless
Installation
Select your connection type.
This TV can be connected to
your home network.
Wireless If you have a wireless router, select Wireless to
connect to the internet.
Wired If you connect with an Ethernet cable, select Wired to
connect to the internet.
•If you have a router with easy connect function, select Wireless and
use to select Easy Connect, then press OK.
•When you select On in the selection screen for Software update
notification, A message will appear later if there is the latest
software on the network server.
5Use to select the signal type.
•If the TV is connected to a cable or satellite set-top box, select the
2nd one and skip to step 7.
1234 756
Installation
Set-top box
Select "Set-top box" to set up a TV
signal from a cable TV box
or satellite TV receiver.
Antenna
Select "Antenna" to set up a TV
signal from a cable TV wall jack
or a standard TV antenna.
6Use to select Antenna for TV channels or Cable for CATV
channels, then press OK.
1234 756
Installation
Skip
Cable
Antenna
Now select either Antenna or
Cable, using up/down key of the
remote control. Once you have
made your selection, press the
OK button to proceed.
Make sure that you have
attached your antenna or cable
signal into the jack on the back of
your TV labeled "ANTENNA IN".
–When Antenna is selected, the TV detects antenna signals. It
searches for DTV and analog TV channels available in your area.
–When Cable is selected, the TV detects signals supplied by cable.
It searches for DTV, analog TV and cable channels available in
your area.
•Auto programming will begin.
0
0
123
4
756
Installation
Stop
Total progress:
Analog channels found:
Digital channels found:
Please wait until you see the Auto
Programming complete message.
Digital channels will take longer
than Analog to nd and program.
Auto programming may take more
than 20 minutes to complete.
System searching. Please wait…
20 .English
Continued on next page.
7Use to select your preferred picture setting, then press OK.
21
Sports
Vivid
Standard
Skip
Please select your preferred picture mode.
8Use to select your preferred sound setting, then press OK.
21
Sports
Vivid
Standard
Skip
Please select your preferred sound mode.
9After Picture and sound setup is completed, a message will appear
if there is the latest software on the network server.
Note(s)
•If you are not receiving a signal from your cable service, contact the cable provider.
•If you press during Autoprogram, this setup of TV channels will be cancelled.
•The initial Autoprogram function can be executed for either Antenna or Cable only once. When
you change the connection (Antenna / Cable), select Search for channels again. p. 38
A
After an initial setup is completed...
•If you want to scan the channels automatically again.
Search for channels p. 38
•If you want to change to another language.
Language p. 34
•If you want to change the country setting.
Country p. 51
•If you want to change the location setting.
Location p. 35
•If you want to change the network setting.
Connect to network p. 41
•If you want to restore the picture and sound setting.
Picture and sound setup p. 31
21 .English
3 Use your TV
Switching on your TV and putting it in
standby mode
Remote control
TV
To turn the TV on from standby or off to standby
•Press on the TV or the remote control.
Note(s)
•Energy consumption contributes to air and water pollution. When the AC power cord is plugged
in, your TV consumes energy with a very low standby power consumption.
Adjusting volume
Remote control
TV
To decrease or increase volume
•Press VOL + / – on the TV or the remote control.
VOL + : Volume up
VOL – : Volume down
To mute or unmute sound
•Press on the remote control to mute the sound.
•Press again or VOL + / – to recover the original sound.
Switching channels
Remote control
TV
To select channels by using CH + / –
•Press CH + / – on the TV or the remote control.
To select channels by using the NUMBER buttons
Digital TV operation
•For digital channels, press a number followed by a dot “•” and the
corresponding sub channel number.
–When selecting digital channel 1 1. 1
Be sure to press • before entering the subchannel number.
Cable / NTSC (Analog) TV operation
–When selecting cable or analog channel 1 1
Press PREV.CH to return to the previously viewed channel.
Note(s)
•To select the non-memorized channels, use the NUMBER buttons.
•Channel not available or No signal will appear on the TV screen after the subchannel broadcast
is over.
•Audio only message will appear on the TV screen, when you receive only sound signal.
22 .English
Continued on next page.
Watching channels from an external
device
Switching each input mode can easily switch with the remote control
between TV and external devices when they are connected to the unit.
1Turn on the set-top box or the connected device.
Press SOURCE and use to select the set-top box or the
connected device and wait a few seconds till the picture appears.
HDMI3
HDMI2
HDMI1
Watch TV Video
Use the remote control of the set-top box or the connected device
to select channels.
Access the Home menu
1Press .
Guide to Home menu
Wireless
Screencasting
SetupNet TVSource
Watch TV Home
Network
Watch TV :Switches back to the TV source if another
source is selected.
Source :To select connected devices.
Home Network :Accesses Home network menus.
Net TV :Accesses Net TV menus.
Wireless Screencasting :Accesses Wireless Screencasting menus.
Setup :Accesses menus that allow you to
change picture, sound and other TV
settings.
Lock or unlock your device from the Home menu
This section describes how to lock or unlock specified device.
1Press SOURCE on the remote control.
2Use to select a device to lock or unlock.
3Press OPTIONS on the remote control.
4Use to select Lock or Unlock, then press OK.
•If device lock is unlocked, Lock will be displayed. If device lock is
locked, Unlock will be displayed at the top right of the device
icons.
5Enter your PIN. Change PIN p. 40
Changing device type
You can change device icons displayed in the source list.
1Press SOURCE on the remote control.
2Use to select the desired device.
3Press red button on the remote control.
4Use to select the desired type, then press OK.
To reset the type
•Press OPTIONS on the remote control at step 3, then select Original
icon.
Scan connections
You can rescan TV connections and update the source list.
Before you begin:
You must set On in Master EasyLink. p. 36
1Press SOURCE on the remote control.
2Use to move the cursor to any device.
3Press OPTIONS on the remote control.
4Use to select Scan connections, then press OK.
23 .English
Continued on next page.
Create a list of favorite channels
You can create lists of your preferred TV channels so that you can find
those channels easily.
1Press OK while viewing a TV program.
2Use to select the desired channel, then press yellow
button.
3Use to select the desired favorite list (Favorites 1 - Favorites 4),
then press OK to add or remove on the list of favorite channels.
•, indicates that the channel is added.
• indicates that the channel is removed.
•The channel will be marked with ! icon.
Display the list of favorite channels
1Press OK while viewing a TV program.
2Use to select Favorites.
T
To change the favorite list
1Press blue button.
2Use to select the desired favorite list (Favorites 1 - Favorites 4).
To remove a channel from the favorite list
1Select the desired channel, then press yellow button.
2Use to select Yes, then press OK.
Changing Picture format
Display modes can be selected when your TV receives a 16:9 or 4:3 video
signal.
Three types of display modes can be selected for a PC input signal.
Press FORMAT repeatedly to switch the TV aspect ratio.
For 16:9 video signal (4096 x 2160p)
Full Unscaled Manual Zoom
For 16:9 video signal (3840 x 2160p)
Full Unscaled Manual Zoom
For 16:9 video signal (not 2160p)
Wide screen
4:3Automatic
Full
Manual Zoom
Automatic
Other than DTV and HDMI connected devices,
enlarges the picture to best fit the screen. DTV and
HDMI connected devices display the picture at its
original size.
The subtitles may remain visible.
4:3
Displays a 16:9 picture at a 4:3 size; the picture is
shortened horizontally. Sidebars appear on both
edges of the screen.
Wide screen Displays a 16:9 picture that is stretched
horizontally and vertically.
Unscaled Displays a 16:9 picture at its original size.
Full
Displays a scaled 16:9 picture. Bars appear on both
the upper and lower portions of the screen
depending on the type of video signal.
Manual Zoom
Allows step by step vertical and horizontal
stretching of the picture size to suit your viewing
preferences. Manual zoom can distort the aspect
ratio of the image, to switch back to a normal
mode select Automatic / Normal.
24 .English
Continued on next page.
For 4:3 video signal
Wide screen
Movie expand 16:9
Movie expand 14:9
4:3Super zoomAutomatic
Manual Zoom
Automatic
Other than DTV and HDMI connected devices,
enlarges the picture to best fit the screen.
DTV and HDMI connected devices display the
picture at its original size. The subtitles may remain
visible.
Super zoom
Displays a 4:3 picture at a 16:9 size; the picture is
stretched horizontally and vertically and its left
and right edges are enlarged. This crops out some
of the top and bottom of the picture.
4:3 Displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
Movie expand 14:9
Displays a 4:3 picture at a 14:9 size; the picture is
stretched horizontally and vertically.
This crops out some of the top and bottom of the
picture. Sidebars appear on both edges of the
screen.
Movie expand 16:9
Displays a 4:3 picture at a 16:9 size; the picture is
stretched horizontally and vertically. This crops
out some of the top and bottom of the picture.
Wide screen Displays a picture that is stretched out of
proportion to fill the screen.
Manual Zoom
Allows step by step vertical and horizontal
stretching of the picture size to suit your viewing
preferences. Manual zoom can distort the aspect
ratio of the image, to switch back to a normal
mode select Automatic / Normal.
For PC input signal
UnscaledWide screen4:3
•This unit can also be connected to your PC that has a DVI terminal.
Use an HDMI-DVI conversion cable for this video connection and it
requires stereo mini 3.5mm plug audio cable for analog audio signal as
well.
•Refer to 16:9 video signal on this page if the PC has HDMI output.
4:3 Displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Wide screen Displays a picture that is stretched out of
proportion to fill the screen.
Unscaled Displays a picture in its original size.
If the signal source has side or top-bottom bars inserted into the picture,
the Picture format function will not eliminate them.
TV screen information
You can display the currently selected channel or other information such
as the aspect ratio on the TV screen.
In the digital mode, the detailed broadcasting information for the current
off-the-air channel such as program title and program guides are
displayed.
1Press INFO.
e
f
g
i
h
ba c d
1
1.1 KABC A Day of Memories
1080i
None
All
English
Stereo
Full
Sleeptimer:
Rating:
Favorites:
Audio language:
Sound mode:
Picture format:
Resolution:
English audio with description.
Close
Channel number / Input mode
Switching channels p. 22
Watching channels from an external device p. 23
Broadcast station
Program title (for DTV only)
CC (not available if Closed caption is set to Off)
Caption settings p. 37
Program’s image aspect ratio
Changing Picture format p. 24
Audio language (DTV) / Audio mode (Analog TV)
Sound p. 33
!Favorites
Create a list of favorite channels p. 24
"Child lock rating
Child lock p. 39
#Remaining time on sleep timer
Sleeptimer p. 34
2Press INFO to hide the information.
Note(s)
•While the program guide is displayed, the closed caption function is interrupted.
•The information display will automatically disappear in 5 seconds.
25 .English
Continued on next page.
Using options menu
You can access to some TV settings directly by using OPTIONS.
1Press OPTIONS to display options menu, then press OK.
2Use to select a desired setting, then press OK.
a b c d
Options
Options
Following settings can be configured.
Voice guide toggle To set Voice guide on or off.
Voice guide toggle p. 36
Closed captions To choose the Closed captions display setting.
Closed captions p. 37
Digital audio
language
To Select the language according to your
preference.
(It differs depending on the program.)
Digital audio language p. 40
Mono/Stereo To Select an audio format.
Mono/Stereo p. 40
Controls
If you have our brand products such as Blu-ray disc player or DVD
recorder that are compatible with EasyLink functions, connect them
to this unit via an HDMI cable so you can simply operate various items
from this unit’s remote control.
Before you begin:
select a device connected to an HDMI connection. p. 23
You must set On in Master EasyLink. p. 36
Otherwise, LINK does not work even if you connected our brand
devices to this unit.
1Press OPTIONS to display options menu.
2Use to select Controls then press OK.
3Use to select the desired item, then press OK.
Device-menu Controls the menu of your connected EasyLink
device.
Device-contents Controls the top menu of your DVD or Blu-ray
discs.
Device-favorite Controls the pop-up menu of your Blu-ray discs.
Note(s)
•Some of EasyLink functions may not be available depending on your EasyLink devices or
discs.
•You must connect this unit to our brand EasyLink devices and be sure its EasyLink (HDMI CEC)
setting is also set to On.
•We do not guarantee 100% interoperability with other brands of HDMI link compliant devices.
Picture and sound
Following settings can be configured.
Auto picture To set predefined picture mode.
Picture p. 31
Auto sound To set predefined sound mode.
Sound p. 33
Headphone
volume
To adjust headphone volume.
Sound p. 33
TV speakers
To Select the audio output from the unit’s
speakers or not.
Sound p. 33
Picture format To switch the TV aspect ratio.
Changing Picture format p. 24
Setup To display setup menu.
ECO settings
Following settings can be configured.
Switch off timer
You can turn off the unit automatically when there
is no operation for specified time. In spite of this
setting, the unit goes into standby mode
automatically if there is no signal input and no user
operation for 15 minutes.
Press repeatedly to change the amount of time
(increases the time by 30 minutes up to 240
minutes).
Each press of will decrease the time by 30
minutes.
To cancel the timer, press repeatedly until “0” is
displayed.
26 .English
Continued on next page.
USB
Your TV is fitted with a USB connection that enables you to view photos,
listen to music or watch video files stored on a USB memory stick.
1Press SOURCE and use to select USB, then press OK.
2Use to select the desired file, then press OK.
USB DISK 2016_12_24 folder_A folder_B folder_C
Photo
Photo
•These recorded files must meet specifications shown below:
Picture (JPEG / Progressive JPEG)
JPEG Upper limit 4000x4000 pixels
Progressive JPEG Upper limit 1024x768 pixels
Music (MP3)
MP3 Sampling frequency 32 kHz or 44.1 kHz or 48
kHz
Constant bit rate 32 kbps - 320 kbps
Video (MPEG / VOB / AVI / MP4)
Maximum video H.264, H.265/HEVC: 3840x2160@30fps,
MPEG: 1920x1080@60fps
Extension .avi .mpg,
.mpeg
.ts,
.trp,
.tp
.vob .mp4 .mkv
Video
codec
Audio
codec
MPEG1,
MPEG2,
MPEG4,
H.264
MPEG1,
MPEG2,
MPEG4
MPEG1,
MPEG2,
H.264,
H.265/
HEVC
MPEG1,
MPEG2
MPEG1,
MPEG2,
MPEG4,
H.264,
H.265/
HEVC
MPEG1,
MPEG2,
MPEG4,
H.264,
H.265/
HEVC
Dolby Digital YES YES YES YES YES YES
MPEG1/2 audio
layer1/2/3 YES YES YES YES NO YES
LPCM YES YES YES YES YES YES
AAC-LC YES YES YES YES YES YES
Note(s)
•This unit accepts USB memory stick only. Other storage devices such as external HDD by USB
bus power will not work.
•Do not use an extension cord and/or USB hub to connect devices to this unit. Always directly
insert the USB flash memory stick to this unit directly.
•We cannot be held responsible if your USB memory stick is not supported, nor will we accept
any liability for damage or loss of stored data.
•The USB memory stick is not included with this TV.
•A maximum of 1,023 folders or files can be recognized.
•A file name exceeding 256 characters or contains a dot character is not supported on this TV.
•A USB memory stick that required its own driver or the device with a special system such as
fingerprint recognition are not supported.
•Be sure to keep a backup copy of the original files on your USB device before you play them
back on this unit. We have no responsibilities for damage or loss of your USB stored data.
•To avoid damaging the USB memory stick and the unit always turn off the unit before you
remove the USB memory stick.
•This unit is not allowed to use the USB memory stick which requires external power supply (500
mA or more).
•This unit does not support MTP (Media Transfer Protocol) or the file other than FAT16 and FAT32
file system. If the file is not supported, an error message appears.
•When the unit does not recognize the USB memory stick, try reconnecting it.
•Playing the files recorded with high bit rates, the images can be interrupted in some occasions.
•This unit does not support external subtitles.
•This unit cannot play back a file which goes over the limit of file restriction limit.
27 .English
Continued on next page.
Viewing photos
1Use to select Photo, then press OK.
2Use to select the desired item, then press OK.
3Press OK or . to start a slide show of the files.
•Press OK or . to pause the slide show.
•The . icon appears.
•Press or to move between images.
•Press BACK or . to stop the slide show.
•Press OPTIONS to display the optional menu, then use to
select the desired item.
Voice guide
toggle *1
Off Sets Voice guide to off.
On Sets Voice guide to on.
Repeat *2
Off Sets repeat playback to off.
One Sets repeat playback for a selected image file.
All Sets repeat playback for all image files in the
current folder.
Slide time *2
Short Switches to the next image in 5 seconds.
Medium Switches to the next image in 10 seconds.
Long Switches to the next image in 15 seconds.
Transitions *2
None No effect when switching images.
Dissolve Overlaps the next image on the current image.
Wipe right Pushes the current image out from left.
Wipe left Pushes the current image out from right.
Wipe up Pushes the current image out from bottom.
Wipe down Pushes the current image out from top.
Box in The next image comes to the center from the
outside.
Box out The next image goes to the outside from the
center.
Auto
picture *2
Selects the picture mode according to your preference.
(Standard, Natural, Vivid, Sports, Movie, Game, Energy saving
and Internet video)
Rotate *3
0Displays an image in its original direction.
90 Rotates an image 90 degrees clockwise.
180 Rotates an image 180 degrees clockwise.
270 Rotates an image 270 degrees clockwise.
Zoom *3
1X Displays an image in its original size.
2X Magnifies a current image by 2 times.
4X Magnifies a current image by 4 times.
*1 Voice guide toggle is available in slide show and pause mode.
*2 You can set Repeat, Slide time, Transitions and Auto picture when
images are in slide show.
*3 You can set Rotate and Zoom when slide show is in pause mode.
Playing music
1Use to select Music, then press OK.
2Use to select the desired item, then press OK.
3Press OK or . to play the selected files.
•Press OK or . to pause, then press OK or . again to resume.
•Press to fast-forward search.
•Press to fast-backward search.
•Press . to stop playback.
•Press OPTIONS to display the optional menu, then use to
select the desired item.
Voice guide
toggle *
Off Sets Voice guide to off.
On Sets Voice guide to on.
Repeat
Off Sets repeat playback to off.
One Sets repeat playback for a selected music
file.
All Sets repeat playback for all music files in
the current folder.
Shuffle
Off Sets shuffle playback to Off.
On Sets shuffle playback for all music files in
the current folder.
TV Speakers
Off The sound will not be output from the
unit's speakers.
On The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink compliant devices
with VOL + / – by using this unit's remote
control.
Auto sound Selects the sound mode according to your preference.
(Standard, Vivid, Sports, Movie, Music and News)
* Voice guide toggle is available in slide show and pause mode.
28 .English
Continued on next page.
Playing movies
1Use to select Movie, then press OK.
2Use to select the desired item, then press OK.
3Press OK or . to play the selected files.
•Press OK or . to pause, then press OK or . again to resume.
•Press to fast-forward search.
•Press to fast-backward search.
•Press . to stop playback.
Press . to resume from the point at which playback was stopped.
Press OK to play from the beginning of the file.
•Press OPTIONS to display the optional menu, then use to
select the desired item.
Voice guide
toggle *
Off Sets Voice guide to off.
On Sets Voice guide to on.
Repeat
Off Sets repeat playback to off.
One Sets repeat playback for a selected video
file.
All Sets repeat playback for all video files in
the current folder.
TV speakers
Off The sound will not be output from the
unit's speakers.
On The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink compliant devices
with VOL + / – by using this unit's remote
control.
Auto picture
Selects the picture mode according to your preference.
(Standard, Natural, Vivid, Sports, Movie, Game, Energy
saving and Internet video)
Auto sound Selects the sound mode according to your preference.
(Standard, Vivid, Sports, Movie, Music and News)
* Voice guide toggle is available in slide show and pause mode.
Note(s)
•The resume information will be kept even when the unit is Turned off.
•If you play another file while the previously viewed file is being resumed, the resume information
of the previously viewed file will be deleted.
•The file or the folder in resume stop mode will be highlighted in gray on List or Thumbnails.
29 .English
4 Getting more from your
TV
This section describes the overview of the Setup menu displayed when
you press and use to Select Setup.
The Setup menu consists of the function setting items below.
1Press to display the Home menu.
2Use to select Setup, then press OK.
Wireless
Screencasting
Setup
Net TVSourceWatch TV Home
Network
3Use to select the desired menu and an item, then press OK.
To quickly set basic picture and sound settings, press OK
Software
settings
Network
settings
Channel
settings
TV
settings
Update
software
Connect to
network
Search for
channels
Picture and
sound setup
Picture and sound
setup p. 31
Guides you to get the best picture and sound settings.
TV settings p. 31
Accesses menus that allow you to change picture, sound and
TV usage settings.
Search for channels p. 38
Guides you through channel installation.
Channel settings p. 38
Accesses menus that allow you to change channel settings.
Connect to network p. 41
Guides you through network installation.
Network settings p. 42
Accesses menus that allow you to network settings.
Update software p. 46
Guides you through an update of the TV software.
Software settings p. 47
Accesses menus that allow you to change software settings.
30 .English
Continued on next page.
Picture and sound setup
B
Before you begin:
You must set Home in Location. p. 35
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1Press and use to select Setup then press OK.
2Use to select Picture and sound setup, then press OK.
3Follow steps 7 to 8 in Initial setup p. 21
TV settings
Picture
Before you begin:
You must set Home in Location. p. 35
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1Press and use to select Setup then press OK.
2Use to select TV settings, then press OK.
3Use to select Picture, then press OK.
Accessibility
Mode selection
Picture format
Advanced settings
Pixel Precise Ultra HD
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
Installation
Features
Sound
Picture
Vertical position
Horizontal position
4
Use
to select the item you want to adjust, then press OK.
The following picture settings can be configured. Depending on the
format of the picture source, some picture settings are not available.
Auto picture
To set your TV to a predefined picture setting.
Personal The customized settings you
defined using the Picture menu.
DOLBY VISION
Bright
When receiving Dolby Vision video
signal, the unit is set to a picture
quality suitable for viewing in a
bright environment.
DOLBY VISION
Dark
When receiving Dolby Vision video
signal, the unit is set to a picture
quality suitable for viewing in a dark
environment.
Standard For normal TV viewing.
Natural
Ideal picture mode for viewing high
quality content without any picture
enhancements.
Vivid
Enhanced picture contrast and
sharpness for viewing in a well-lit
room.
Sports Brilliant picture settings for high
action.
Movie Deep picture settings for a
cinematic experience.
Game Optimized for PCs and game
consoles.
Energy saving Eco TV settings for low power
consumption.
Internet video Optimized for low bit-rate internet
video.
When you adjust the following settings, Personal picture will be set
automatically.
Cursor Cursor
Backlight
To reduce power
consumption and
brightness
To increase power
consumption and
brightness
Contrast To decrease contrast To increase contrast
Brightness To decrease brightness To increase brightness
Color To decrease color
intensity To increase color
intensity
Tint To add green To add red
Sharpness To soften To sharpen
Pixel Precise Ultra
HD
Enters sub-menus to adjust the following settings:
(Dynamic contrast, Color enhancement, Black
stretch, 120 PMR, 4K UHD Upscaling, Macro
Dimming, Noise reduction and MPEG artifact
reduction)
Advanced settings
Enters sub-menus to adjust the following settings:
(Color alignment, Custom color management,
Gamma, Blue stretch and Film mode)
Picture format
Automatic
Changing Picture
format p. 24
Super zoom
4:3
Movie expand 14:9
Movie expand 16:9
Wide screen
Full
Unscaled
Mode selection
PC
To turn off image
enhancement features
which makes the TV to
act purely as a monitor
HDTV
To enable image
enhancement features
to improve picture
quality
Cursor Cursor
Horizontal position To move PC screen left To move PC screen right
Vertical position To move PC screen
down To move PC screen up
Dolby Vision
Notification
Off To set Dolby Vision
Notification to off
On To set Dolby Vision
Notification to on
Note(s)
•The auto picture modes - DOLBY VISION Bright and DOLBY VISION Dark are available only
when Dolby Vision content is being played back.
31 .English
Continued on next page.
Y
You may adjust picture quality and enhancement settings using Pixel
Precise Ultra HD and Advanced settings sub menus.
Color enhancement
MPEG artifact reduction
Dynamic contrast
4K UHD Upscaling
Black stretch
Noise reduction
Mode selection
Picture format
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
Pixel Precise Ultra HD
Maximum
Medium
Minimum
O
120 PMR
Macro Dimming
Vertical position
Horizontal position
Dynamic
contrast
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Color
enhancement
Off To set color enhancement to off
On To make colors more vivid and bright
Black
stretch
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
120 PMR Off To set 120 PMR to Off
On To make the video appear smoother
4K UHD
Upscaling
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Macro
Dimming
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Noise
reduction
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
MPEG
artifact
reduction
To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Blue oset
Green oset
Red oset
Blue gain
Green gain
Red gain
Mode
Custom color management
Gamma
Film mode
Color alignment
Mode selection
Picture format
Advanced settings
Sharpness
Tint
Color
Brightness
Contrast
Backlight
Auto picture
Pixel Precise Ultra HD
Blue stretch
Vertical position
Horizontal position
Color
alignment
Mode
To set the color temperature to Personal,
Cool, Normal and Warm.
When you adjust the following settings,
Personal will be set automatically.
Cursor Cursor
Red gain To decrease red
contrast To increase red
contrast
Green gain To decrease green
contrast To increase green
contrast
Blue gain To decrease blue
contrast To increase blue
contrast
Red offset To decrease red
brightness To increase red
brightness
Green offset To decrease green
brightness To increase green
brightness
Blue offset To decrease blue
brightness To increase blue
brightness
Custom color
management
To select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
Cursor Cursor
Tint
To rotate only
selected color tint in
clockwise direction
To rotate only
selected color tint in
counterclockwise
direction
Saturation
To decrease color
with only selected
color
To increase color
with only selected
color
Brightness
To decrease
brightness with only
selected color
To increase
brightness with only
selected color
Gamma
To select the desired setting, then press OK
(Very Dark Room, Dark Room, Normal, Bright Room and
Very Bright Room)
Blue stretch To select the desired setting, then press OK
(Off, Minimum, Medium and Maximum)
Film mode
Off To set film mode to off
Auto To optimize the picture recorded by the
original film
Note(s)
•Mode selection is available only if
–The external input modes are selected HDMI 1, HDMI 2 or HDMI 3.
–The connected HDMI device is outputting a video signal.
32 .English
Continued on next page.
Sound
B
Before you begin:
You must set Home in Location. p. 35
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1Press and use to select Setup then press OK.
2Use to select TV settings, then press OK.
3Use to select Sound, then press OK.
Delta volume
Digital output format
Headphone volume
TV speakers
Auto volume leveling
Sonic Emotion Premium
Balance
Equalizer
Auto sound
Installation
Features
Sound
Picture
Accessibility
4Use to select the item you want to adjust, then press OK.
The following sound settings can be configured. Depending on the format
of the broadcasting, some sound settings are not available.
Auto sound
To set your TV to a predefined sound setting.
When you adjust the following settings (Equalizer,
Sonic Emotion Premium and Auto volume leveling),
Personal sound will be set automatically.
Personal The customized settings you
defined using the Sound menu.
Standard For normal TV viewing.
Vivid Enhanced sound.
Sports Clear sound for high action.
Movie Powerful sound settings for a
cinematic experience.
Music Optimized for music playback.
News Set the anchor's voice at a
comfortable volume.
Adjust the tonal quality for each frequency.
Equalizer
Cursor Cursor
To adjust each level of tonal quality
Press BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
Balance Cursor Cursor
To adjust the balance of the right and left speakers
This selects sound modes for more spatial or surround sound
reproduction.
Sonic
Emotion
Premium
Sonic
Emotion
Off To set Sonic Emotion to off
On To set Sonic Emotion to on
Dialog
Enhancement
Off To set Dialog Enhancement to off
On To set Dialog Enhancement to on
Bass
Enhancement
Off To set Bass Enhancement to off
On To set Bass Enhancement to on
Absolute 3D
Sound
Off To set Absolute 3D Sound to off
On To set Absolute 3D Sound to on
This function keeps a constant Loudness differential between the TV
commercials and the programs.
Auto volume
leveling
Off To remove the Auto volume
leveling
On
To reduce volume differences
between the TV commercials and
the programs
You can select the audio output from the unit’s speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit’s remote control. Make sure Master EasyLink
is set to On. p. 36
TV speakers
Off No output sound from the unit’s
speakers
On To output sound from the unit’s
speakers
Speakers
EasyLink
To control audio output from your
connected EasyLink compliant
devices with VOL + / – by using this
unit's remote control.
Adjust headphone volume.
Headphone
volume
Cursor Cursor
To decrease or increase volume
You can set the digital audio output format from SPDIF/ARC.
Digital output
format
PCM To output PCM format
Bitstream
To output audio in its native format
as Bitstream to connected audio
receiver
If a channel or input device is too loud or too soft, navigate to that channel
or input device.
Delta volume
Cursor Cursor
Provides the ability to set a custom volume level
for the current channel or input source.
If the source volume is too loud, set a negative
value (-1 to -12)
If the source volume is too soft, set a positive value
(+1 to +12)
33 .English
Continued on next page.
Features
1Press and use to select Setup then press OK.
2Use to select TV settings, then press OK.
3Use to select Features, then press OK.
Sleeptimer
Installation
Features
Sound
Picture
Accessibility
4Adjust the following items.
Sleeptimer
Sleep timer can set the unit to go into standby mode after an incremental
period of time.
1Use to select Sleeptimer, then press OK.
2Use repeatedly to change the amount of time
(increases the time by 5 minutes up to 180 minutes).
•Each press of will decrease the time by 5 minutes.
•Press INFO once to call up the display for checking the remaining
time.
•To cancel the sleep timer, press repeatedly until “0” is
displayed.
Installation
1Press and use to select Setup then press OK.
2Use to select TV settings, then press OK.
3Use to select Installation, then press OK.
Installation
Features
Sound
Picture
Restore default settings
Preferences
Language
Accessibility
4Adjust the following items.
Language
You can set the language for the on-screen display.
1Use to select Language, then press OK.
Installation
Features
Sound
Picture
Español
Français
English
Restore default settings
Preferences
Language
Accessibility
2Use to select English, Español or Français, then press OK.
Note(s)
•If you need the English menu instead of the Spanish or French menu’s, press .
Use to select Configuración or Configuration, then press OK.
Use to select Ajustes de TV or Réglages de la télévision, then press OK.
Use to select Instalación or Installation, then press OK.
Use to select Idioma or Langue, then press OK.
Use to select English, then press OK.
Press to exit the Home menu.
34 .English
Continued on next page.
Preferences
You can set the unit to reduce the power consumption or adjust the
backlight brightness in Location setting.
EasyLink allows you to operate your connected EasyLink device.
S
Setting your location to home
Choosing Home gives you full flexibility to change predefined settings for
picture and sound.
1Use to select Preferences, then press OK.
2Use to select Location, then press OK.
TV placement
Location
HDMI mode
Home
Retail
Restore default settings
Preferences
Language
EasyLink
Retail Demo
3Use to select Home, then press OK.
Retail
The unit will be set up with predefined settings for
retail displays. In this setting, you can set the backlight
brighter.
Home
The unit is set to maximize the energy efficiency for
home setting and it can be adjusted through a choice
of picture and sound quality selections according to
your preference.
Note(s)
•You must set Home in the menu. Otherwise, personalized picture and sound settings will not
be memorized after the unit goes into standby mode.
HDMI mode
If there are issues with picture/color and/or sound when connecting an
external device using the HDMI port, please try switching the HDMI mode
following the instructions below.
1Press and use to select Setup, then press OK.
2Use to select TV settings, then press OK.
3Use to select Installation, then press OK.
4Use to select Preferences, then press OK.
5Use to select HDMI mode, then press OK.
6Use to select HDMI1, HDMI2 or HDMI3, then press OK.
7Use to select Max 4K@60Hz + HDR, Max 4K@60Hz or Max
4K@30Hz (Compatibility) depending on the output capabilities of
the external device, then press OK.
•When switching the HDMI configuration, the screen will black out
for a moment, then come back on.
Note(s)
•For HDMI 1 and HDMI3, Max 4K@30Hz (Compatibility) is the default setting, and for HDMI 2,
Max 4K@60Hz + HDR is the default setting.
•The HDMI connector with HDMI mode set to Max 4K@30Hz (Compatibility) supports up to
UHD 30P, while The HDMI connector with HDMI mode set to Max 4K@60Hz supports up to
UHD 60P. The HDMI connector with HDMI mode set to Max 4K@60Hz + HDR supports up to
UHD 60P with HDR signal.
•Switching the HDMI mode may cause loss of HDMI CEC functionality in certain cases.
TV placement
To apply the best settings for your TV, select wall mount or stand mount.
1Use to select Preferences, then press OK.
2Use to select TV placement, then press OK.
3Use to select Wall mounted or On a TV stand, then press OK.
Retail Demo
When you set Location to Retail, E-sticker (Electronic Sticker) is displayed.
E-sticker can be turned off using procedure below.
1Use to select Preferences, then press OK.
2Use to select Retail Demo, then press OK.
3Use to select Off, then press OK.
Use Philips EasyLink
Your TV supports Philips EasyLink, which enables one-touch play and
one-touch standby between EasyLink-compliant devices. Compliant
devices must be connected via an HDMI connector.
One-touch play
When you connect your TV to devices that support one-touch play, you
can control your TV and the devices with one remote control. For
example, when you press (Play) on your DVD remote control, your TV
automatically switches to the correct channel to show the DVD content.
One-touch standby
When you connect your TV to devices that support standby, you can use
your TV remote control to put your TV and all connected HDMI devices
in standby mode. You can perform one-touch standby using the remote
control from any of the connected HDMI devices.
System audio control
When you connect your TV to HDMI CEC compliant devices, your TV can
switch automatically to play audio from the connected device. To use
one-touch audio, you must map the audio input from the connected
device to your TV. You can use the remote control from the connected
device to adjust the volume.
Remote control (RC) key forwarding
RC key forwarding allows you to control EasyLink-compliant devices
using your TV remote control.
HDMI-ARC (Audio Return Channel) (HDMI 2 only)
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable. Be sure that the device is HDMI CEC and ARC compliant, and
that the TV is connected to the device using an HDMI cable attached to
both HDMI-ARC connectors.
Note(s)
•Philips does not guarantee 100% interoperability with all HDMI CEC devices.
•The EasyLink-compliant device must be switched on and selected as the source.
35 .English
Continued on next page.
E
EasyLink (HDMI CEC)
This function allows you to operate the linked functions between our
brand devices with a EasyLink feature and this unit connecting through
an HDMI cable. You must connect this unit to our brand EasyLink devices
and be sure its EasyLink (HDMI CEC) setting is also set to on.
1Use to select Preferences, then press OK.
2Use to select EasyLink, then press OK.
3Use to select the item you want to adjust, then press OK.
On
O
HDMI-ARC
RC key forwarding
Auto TV On
Master EasyLink
TV placement
EasyLink
Location
HDMI mode
Retail Demo
Set the Master EasyLink to On or Off. The following additional settings
will be grayed out when you set them to Off.
Master
EasyLink
Off Disables all EasyLink.
On
Selects if you have connected an
external device that is compatible with
the EasyLink function.
This unit will turn on when the power on signal is sent from your connected
EasyLink device.
Auto TV On
Off
This unit stays in Standby mode even
if you turn on your connected EasyLink
device.
On
This unit turns on automatically when
you turn on your connected EasyLink
device.
You can operate some functions such as disc playback or call up the
menu of the connected devices, by using this unit’s remote control.
RC key
forwarding
Off Disable RC key forwarding.
On
PLAY, PAUSE. / STOP. /
FWD/ / REV0 / VOL + / – /
(MUTE) / OPTIONS / / OK /
BACK / the NUMBER buttons can
be used to control your connected
EasyLink devices by this unit’s remote
control.
Note(s)
•Pause may not work properly on some devices even if they are EasyLink (HDMI CEC)
compliant.
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly
to a connected audio device, without the need for an additional digital
audio cable.
HDMI-ARC
(HDMI 2 only)
Off Disable HDMI-ARC.
On
You can output TV audio through the
HDMI cable solely, provided both the
TV and device are HDMI-ARC
compliant.
Return your settings to default values
You can return settings to their default values.
1Use to select Restore default settings, then press OK.
2Use to select Reset AV settings or Reset all settings, then press
OK.
Reset AV settings
Return picture and sound settings to their default
values. The channel installation settings are not
affected.
Reset all settings Return all the settings to their default values.
Accessibility
1Press and use to select Setup then press OK.
2Use to select TV settings, then press OK.
3Use to select Accessibility, then press OK.
Sound
Picture
Digital audio preferences
Caption settings
Installation
Features
Accessibility
Voice guide
4Adjust the following items.
Voice guide
Lets you configure voice guide and its settings.
1Use to select Voice guide, then press OK.
Voice guide toggle Off To set Voice guide off
On To set Voice guide on
Speed
Fast Set voice guide speed based on
your preference
Normal
Slow
Pitch
High Set voice guide pitch based on
your preference
Normal
Low
Verbosity
Verbose Set voice guide explanation
verbosity based on your
preference
Succinct
Volume level
Loud Set voice guide volume based on
your preference
Normal
Soft
36 .English
Continued on next page.
Caption settings
Closed captions displays the audio portion of the program as
superimposed text over the video.
1Use to select Caption settings, then press OK.
CC w/ mute
On
O
Digital caption options
Digital caption service
Caption service
Closed captions
Digital audio preferences
Caption settings
Voice guide
Closed captions
Off Closed caption is not displayed.
On Closed caption is always displayed.
CC w/ mute Closed caption is displayed when
the sound is off.
Digital TV operation
In addition to the basic closed caption, DTV has its own closed caption
called digital caption service. Use this menu to change the settings for
digital caption service.
Digital caption
service CS-1 to CS-6
Select one of these before
changing any other item in Caption
settings menu. Choose CS-1 under
normal conditions.
You can choose the size, font, color, background and other characteristics
of the caption text.
Digital caption
options
Reset to
default
You can reset the status of digital
caption options.
You can change closed captioning font style, size,
color and transparency.
(Font style, Font size, Font color and Font
opacity)
You can change background color and
transparency of the displayed caption.
(Background color and Background opacity)
You can change edge color and type of the
displayed caption text.
(Edge color and Edge type)
So, you must be Philip. Hi!
So, you must be Philip. Hi!
I’m pleased to meet you.
I’m pleased to meet you.
So, you must be Philip. Hi!
I’m pleased to meet you.
(Background color and Background opacity)
Background
(Edge color and Edge type)
Text edge
(Font style, Font size, Font color and Font opacity)
Text font
Picture display
•Review your setting choice made above by looking in the upper left
corner of the displayed setting box (not all selections show the
differences selected).
Cable / NTSC (Analog) TV operation
Caption service
CC-1 and T-1
The primary closed captions and
text services. The closed captions
or text is displayed in the same
language as the program’s dialog
(up to 4 lines of script on the TV
screen).
CC-3 and
T-3
Serve as the preferred data
channels. The closed captions or
text is often a secondary language.
CC-2, CC-4,
T-2 and T-4
Rarely available and broadcasters
use them only in special conditions,
such as when CC-1 and CC-3 or T-1
and T-3 are not available.
•There are 3 display modes according to programs:
Paint-on Displays characters on the TV screen immediately.
Pop-on Once characters are stored in memory, they are
displayed all at once.
Roll-up Displays the characters continuously by scrolling
(max. 4 lines).
Note(s)
•Digital caption service that you can switch differs depending on the broadcast description.
•Closed captioning service may not be controlled by this unit’s menu options if you are watching
television through an external cable or satellite set-top box. In which case you will need to use
the menu options on the external set-top box to control closed captioning.
•The captions do not always use correct spelling and grammar.
•Not all TV programs and product commercials include closed caption information. Refer to your
area TV program listings for the TV channels and times of closed caption shows. The captioned
programs are usually noted in the TV listings with service marks such as CC.
•Not all captioning services are used by a TV channel during the transmission of a closed caption
program.
•Closed caption will NOT be displayed when you are using an HDMI or a component
connection.
•To show the closed caption on your TV screen, broadcast signal must contain the closed caption
data.
•Not all TV programs and commercials have the closed caption or all types of the closed
caption.
•Caption's and text may not exactly match the TV voice.
•Changing channels may delay the closed caption for a few seconds.
•Adjusting or muting the volume may delay the closed caption for a few seconds.
•Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace
with the on-screen action. This is not a malfunction.
•The caption or text characters will not be displayed while the Main menu or functions display
is shown.
•If a black box appears on the TV screen, this means that the closed caption is set to the text
mode. To clear the box, select CC-1, CC-2, CC-3 or CC-4.
•If the unit receives poor quality television signals, the captions may contain errors or there might
be no captions at all. Some possible causes of poor quality signals are:
–Automobile ignition noise
–Electric motor noise
–Weak signal reception
–Multiplex signal reception (ghosts or screen flutter)
–Data dropout and pixelation (for DTV only)
•The unit retains the closed caption setting if the power fails.
•When the unit receives special effects playback signal (e.g. search, slow and still) from a VCR’s
video output channel (ch3 or ch4), the unit may not display the correct caption or text.
•The EUT setting that satisfies § 79.102 (e) is as follows:
–Font: Mono-font
–Character size: Large
37 .English
Continued on next page.
Digital audio preferences
You can set the interpretive broadcasting by an audio explanation.
1Use to select Digital audio preferences, then press OK.
Primary audio selection criteria
Audio language
Audio accessibility
Digital audio preferences
Caption settings
Voice guide
Audio accessibility
To prioritize VI-Visually Impaired streaming or HI-
Hearing Impaired streaming: The setting for
handicapped users (Main audio, Visually
Impaired or Hearing Impaired).
Audio language To set your preferred language in the audio
streaming (English, Spanish or French).
Primary audio
selection criteria
To set TV priority based on either of the above
settings: (Audio accessibility or Audio language).
Search for channels
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install cable channels.
1Press and use to select Setup, then press OK.
2Use to select Search for channels, then press OK.
3Use to select Start, then press OK.
Install channels
You can search and store all channels. If you move the unit to a different
area after the initial setting, it is recommended to perform
Autoprogramming.
4Use to select Antenna or Cable, then press OK.
5Press OK on Start.
•When the scanning and memorizing of available channels is
completed, the lowest memorized channel will be displayed.
6Follow the on-screen instructions to complete the installation.
0
0
12 34
Stop
Total progress:
Analog channels found:
Digital channels found:
complete.
more than 20 minutes to
Auto programming may take
wait...
System searching. Please
Channel settings
1Press and use to select Setup, then press OK.
2Use to select Channel settings, then press OK.
3Adjust the following items.
Uninstall channels
Installation mode
Mono/Stereo
Digital audio language
Change PIN
Child lock
Channel installation
Channel installation
Be sure the RF cable is correctly connected to this unit and you are
registered with your cable TV provider when you install cable channels.
Installation mode
1Use to select Channel installation, then press OK.
2Use to select Installation mode, then press OK.
3Use to select Antenna or Cable, then press OK.
•When Antenna is selected, the TV detects antenna signals. It
searches for DTV and analog TV channels available in your area.
•When Cable is selected, the TV detects signals supplied by cable.
It searches for DTV, analog TV and cable channels available in your
area.
Uninstall channels
The channels selected here can be skipped when selecting the channels
using CH + / –.
Those channels can still be selected with the NUMBER buttons.
1Use to select Channel installation, then press OK.
2Use to select Uninstall channels, then press OK.
3Use to select the channel you want to remove, then press OK.
•The removed channels are not displayed on the list of favorite
channels.
•To reactivate a removed channel, use then press OK.
38 .English
Continued on next page.
Child lock
You can prevent your children from watching certain programs or certain
channels by locking the TV controls and by using ratings.
1Use to select Child lock, then press OK.
Mono/Stereo
Digital audio language
Change PIN
Child lock
Channel installation
Region ratings lock
Canadian French rating
Canadian English rating
Movie ratings lock
TV ratings lock
2Use the NUMBER buttons to enter the 4-digit numbers for your PIN
code.
•When you have not set up your PIN code, enter 0, 0, 0, 0.
•When the PIN code is correct, Child lock menu is displayed.
See the following description for setting each item.
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
All
Region ratings lock
Canadian French rating
Canadian English rating
Movie ratings lock
TV ratings lock
Mono/Stereo
Digital audio language
Change PIN
Child lock
Channel installation
Note(s)
•When you select the higher rating and set it to ,, the lower ratings will be blocked
automatically.
•To remove all blocks place a check in the All box and then remove that check to remove all
blocks.
•Region ratings lock will be available when the unit receives a digital broadcast using the new
rating system.
•To block any inappropriate programs, set your limits in TV ratings lock, Movie ratings lock and
Region ratings lock.
•For the United States, the unit may download the region ratings lock table, if required.
•The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.
Setting TV and movie ratings
Movie ratings lock is the rating system created by MPAA. TV ratings lock
has controlled access to individual programs based on their age ratings
and content rating.
3Use to select TV ratings lock or Movie ratings lock, then press
OK.
4Use to select the desired rating, then press OK repeatedly to
switch between block and view.
•, indicates that the rating is locked (Blocked).
• indicates that the sub rating is locked (Blocked).
• indicates that the rating is not locked (Viewable).
TV ratings lock
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
All
Region ratings lock
Canadian French rating
Canadian English rating
Movie ratings lock
TV ratings lock
Movie ratings lock
Region ratings lock
Canadian French rating
Canadian English rating
Movie ratings lock
TV ratings lock
X
NC-17
R
PG-13
PG
G
NR
All
US movie
ratings
US TV
ratings Description
All All ratings locked including no rating
NR None No rating
–TV-Y Appropriate for all children
–TV-Y7 Appropriate for all children 7 and older
G TV-G General audience
PG TV-PG Parental guidance suggested
PG-13 – Unsuitable for children under 13
–TV-14 Unsuitable for children under 14
R–Restricted under 17 requires
accompanying parent or adult guardian
NC-17 – No one under 17 admitted
X TV-MA Mature audience only
To set the sub ratings (displayed in the right column)
For TV ratings lock, you can further set the sub ratings to block specific
elements of programming. To set the sub ratings, follow the step below.
Use to select the desired rating, then press OK repeatedly to
switch between , and .
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
None
All
Region ratings lock
Canadian French rating
Canadian English rating
Movie ratings lock
TV ratings lock
Fantasy Violence
39 .English
Continued on next page.
US TV ratings Sub rating
TV-Y7 Fantasy Violence
TV-PG Violence
Sex
Language
Dialog
TV-14
TV-MA
Violence
Sex
Language
Note(s)
•Blocked sub rating's will appear beside the main rating category in TV ratings lock menu.
•You cannot block a sub rating if the main rating is set to .
•Changing the category to , or automatically changes all its sub ratings to the (, or ).
Canadian English or Canadian French ratings
You can select the rating for Canadian English or Canadian French
broadcasting.
3Use to select Canadian English rating or Canadian French
rating, then press OK.
4Use to select the desired rating, then press OK repeatedly to
switch between block and view.
•, indicates that the rating is locked (Blocked).
• indicates that the rating is not locked (Viewable).
Canadian
English
rating
Canadian
French rating Description
All Locked all ratings
EExempt program
C– For all children
C8+ – For all children 8 and older
GGeneral audience
–8 ans+ Unsuitable for ages under 8
PG – Parental guidance suggested
–13 ans+ Unsuitable for ages under 13
14+ – Unsuitable for ages under 14
–16 ans+ Unsuitable for ages under 16
18+ 18 ans+ Adult audience only
Note(s)
•The V-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option to block
NR, None or E programs are used in Movie ratings lock, TV ratings lock, Canadian English
rating or Canadian French rating accordingly “unusual results may occur and the unit may not
receive emergency bulletins or other types of programming”: / Emergency bulletins (Such as
EAS messages, weather warnings and others) / Locally originated programming / News /
Political / Public service announcements / Religious / Sports / Weather.
Change PIN
Although the default PIN code (0000) is supplied with the unit, you can
set your own PIN code.
1Use to select Change PIN, then press OK.
2Press the NUMBER buttons to enter the current 4-digit PIN code.
3Press the NUMBER buttons to enter the new 4-digit PIN code.
•Enter PIN code again to confirm.
Note(s)
•Make sure new PIN code and confirm PIN code must be exactly the same. If they are different,
the space is cleared for reentering.
•If you have forgotten your PIN code, enter 07 1 1 to reset the PIN code.
Digital audio language
You can select the audio language while your TV is receiving the digital
broadcasting.
1Use to select Digital audio language, then press OK.
Digital audio
language
To select the language according to your
preference.
(It differs depending on the program.)
Mono/Stereo
Cable / NTSC (Analog) TV operation
You can select an audio format while your TV is receiving the analog
broadcasting.
1Use to select Mono/Stereo, then press OK.
2Use to select Mono, Stereo or SAP (Second Audio Program),
then press OK.
40 .English
Continued on next page.
Connect to network
Setup network connection settings in order to use Net TV or network
upgrade functions.
•The meanings of abbreviations are defined as below.
AP :Wireless LAN access point
SSID :Wireless network name
•The key entry screen will appear when you select SSID, WEP /
others or proxy address.
312
Manual
Easy Connect
Pin code
If your router does not have an easy connect feature, select Manual and press OK.
If your router has an easy connect feature, select Easy Connect and press OK.
M
anua
l
E
asy Connect
o
de
o
Cancel
All clear
OK
Text
. , @ ’
g h i
p q r s
a b c
j k l
t u v
_ ? ! - d e f
m n o
w x y z
abc ABC 123+/; Clear
Network settings
•Enter the key of the selected wireless network using , then
press OK.
Clear :Clear the entered number or word.
All clear :Clear all the entered numbers or words.
abc :Switch to the small letter mode.
ABC :Switch to the capital letter mode.
123+/; :Switch to the numeral and symbol mode.
Cancel :Shows the cancellation display.
OK :Set the entered number or word.
1Press and use to select Setup, then press OK.
2Use to select Connect to network, then press OK.
312
Cancel
Wired
Wireless
Network settings
Select your connection type.
This TV can be connected to
your home network.
3Adjust the following items.
Wireless setting
Select to use a wireless LAN to connect to the internet by a wireless
connection.
1Use to select Wireless, then press OK.
2Use to select the desired setting, then press OK, and follow the
on-screen instructions.
Easy Connect
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
connect button on your router. If connection test
fails, refer to the router’s manual for more details.
Scan
Search for wireless networks automatically and
select the wireless network name (SSID) from the
list.
Manual entry
Set up the connection to the wireless LAN Access
Point (AP) (e.g. wireless router) manually by
entering the wireless network name (SSID).
*Easy Connect cannot be used when the security protocol is set to WEP.
Change the Access Point’s security mode from WEP to others
(recommended).
Wired setting
Select to use an Ethernet cable to connect to the internet by a wired
connection. Please purchase shielded Ethernet cables at your local store
and use it when you connect to network equipment.
1Use to select Wired, then press OK.
•Connection test will start automatically. p. 44
41 .English
Continued on next page.
Network settings
1Press and use to select Setup, then press OK.
2Use to select Network settings, then press OK.
3Adjust the following items.
Manual network settings
1Use to select Manual network settings, then press OK.
Proxy conguration
IP conguration
Wireless network setting
Network selection
Net TV
Wake-on-LAN(DIAL)
Home network
Setting status
Connection test
Manual network settings
Reset network settings
Samba interactive TV settings
N
Network selection
2Use to select Network selection, then press OK.
3Use to select the desired setting, then press OK.
Wired If you connect to an Ethernet cable, select Wired
to connect to the internet.
Wireless If you have a router with easy connect function,
select Wireless to connect to the internet.
Wireless network setting
This menu is displayed only when you set Wireless in Network selection.
In order to use a wireless network, you must set up a connection to the
AP (e.g. wireless router).
2Use to select Wireless network setting, then press OK.
Auto
Search for wireless networks automatically and select the SSID from the
list.
3Use to select Auto, then press OK.
4The list of wireless networks will be displayed. Use to select the
appropriate the SSID, then press OK.
Manually enter your SSID
Auto
Router 4
Router 3
Router 2
Router 1
Manual
Easy Connect
Pin code
•If you select the SSID with , WEP*2 / others Key entry screen will
appear. Enter the WEP*2 / others key of the selected wireless
network using , then press OK.
•If you select the SSID has an easy connect, the easy connect setting
screen will appear. Use to select a setting, then press OK.
Easy Connect
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
connect button on your router. If connection test
fails, try Easy Connect again.*1 If it fails then refer
to the router’s manual for more details.
Pin code
Select this setting if your router has an easy
connect feature but does not have an easy
connect button. Enter the 8-digit PIN code shown
on your TV in the Router settings menu via PC
before Connect is selected.
Manual
If your wireless network with authentication setting
(WEP*2, others), WEP*2 / others Key entry screen
will appear. Enter the WEP*2 / others key of the
selected wireless network using , then
press OK.
*1 Easy Connect cannot be used when the security protocol is set to
WEP. Change the Access Point’s security mode from WEP to others
(recommended).
*2 WEP is not recommended to be used due to its major security flaws.
Change the security protocol on the wireless router to others
(recommended) mode.
Confirmation message will appear. Select OK to complete the settings.
Note(s)
•For a wireless network with authentication setting, key icon appears to the right hand of the
SSID.
•Signal icon shows the strength of the signal.
•WEP*2 / others key appears as asterisks on the confirmation screen.
•The wireless LAN supports following specifications.
–Wireless standards: IEEE 802.1 1 a/b/g/n/ac
–Frequency spectrum: 2.4GHz / 5GHz
–Security protocol: WEP*2 / others
42 .English
Continued on next page.
Manually enter your SSID
Set up the connection to the AP (e.g. wireless router) manually by entering
the SSID.
3Use to select Manually enter your SSID, then press OK.
•AP (e.g. wireless router) SSID entry screen will appear.
Enter the SSID using , then press OK.
4Use to select the authentication setting of the selected wireless
network.
•For a wireless network with authentication setting, select the
authentication setting, according to the security type of the wireless
network.
XXXXXXXXXXXXXX
WEP
None
Manually enter your SSID
Auto
Others
None Set the authentication setting to None.
WEP Set the authentication setting to WEP*.
Others Set the authentication setting to Others.
•For a wireless network without authentication setting, select None.
•If you select WEP* or Others, WEP* / others Key entry screen will appear.
Enter the WEP* / others key of the selected wireless network using
, then press OK.
•Confirmation message will appear. Select Yes to complete the settings.
*WEP is not recommended to be used due to its major security flaws.
Change the security protocol on the wireless router to others
(recommended) mode.
I
IP configuration
In following cases, select IP configuration to set each setting as
necessary.
–When connection test failed with the setting of Connection test.
–When instructed by your Internet service provider to make specific
settings in accordance with your network environment.
2Use to select IP configuration, then press OK.
3Use to select a setting, then press OK.
Manual
Auto
MAC address
Secondary DNS
Primary DNS
DNS setting mode
Default gateway
Subnet mask
IP address
IP setting mode
Proxy conguration
IP conguration
Wireless network setting
Network selection
IP setting
mode
Auto Sets the IP setting automatically.
Manual Sets the IP setting manually.
IP address *1, 3
A set of numbers which are assigned to
devices participating in a computer
network.
Subnet mask *1, 3 A mask which is used to determine what
subnet an IP address belongs to.
Default gateway *1, 3 IP address of the network device (such as
router) which provides internet access.
DNS setting
mode
Auto Sets the DNS setting automatically.
Manual Sets the DNS setting manually.
Primary DNS *2, 3 A server which handles the name and IP
address over the internet.
Secondary DNS *2, 3 A server which handles the name and IP
address over the internet.
MAC address
An address which recognizes the devices
connecting to the network. It is also called
hardware address.
*1 Items can be selected only when IP setting mode is set to Manual.
*2 Items can be selected only when DNS setting mode is set to
Manual.
*3 Use or the NUMBER buttons to input numbers. When you use
to input numbers, then press OK or input the triple digits by
using the NUMBER buttons, the cursor moves to the next entry field.
When you use to input numbers, then press OK or input the
triple digits by using the NUMBER buttons at the rightmost entry
field, numbers will be stored and go back to the previous menu.
Note(s)
•The range of input numbers is between 0 and 255.
•If you enter a number larger than 255, the number will automatically be 255.
•The manually entered number will be saved even if you change the setting to Auto.
•If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next cell.
•If the entered IP address or the default gateway or primary DNS number is same as the default
setting, IP address setting will be set to Auto. (The manually entered number will be saved).
•When IP address setting is set to Manual, the setting of DNS setting will automatically be Manual
and when IP address setting is set to Auto, you can set either Auto or Manual for DNS setting.
43 .English
Continued on next page.
P
Proxy configuration
2Use to select Proxy configuration, then press OK.
3Use to select a setting, then press OK.
Do not useProxy setting
Proxy conguration
IP conguration
Wireless network setting
Network selection
Use
Proxy port
Proxy address
•Do not use is selected for default settings.
•If you need to change the proxy setting as instructed by your
internet service provider to set the designated proxy address and
port, select Use.
Proxy setting Do not use Does not use the proxy server.
Use Uses the proxy server.
Proxy address *Selects the number or word by
using , then press OK.
Proxy port *Use or the NUMBER buttons
to input numbers.
*Items can be selected only when Proxy setting is set to Use.
Note(s)
•The range of input numbers for the port number is between 0 and 65535. (If you enter a number
larger than 65535, it will be regarded as 65535.)
•For proxy port, the selected ports may be blocked and not be able to use depending on your
network environment.
•If the proxy address is entered with blank only, proxy server setting will be set to Do not use.
Connection test
Perform the following steps to test your internet connection after you
have connected an Ethernet cable or entered network settings such as IP
address, DNS settings, etc. manually.
1Use to select Connection test, then press OK.
•Connection test will start automatically and the test result for home
network and internet will appear right after the connection test
finishes.
•“Testing…” is displayed while the connection test is in progress.
Home network Internet Description
Pass Pass Connection test is successfully
completed.
Fail -
Connection test for home network
failed. Check the connection
settings.
Pass Fail Connection test for internet failed.
Check the connection settings.
•If the connection test for internet passes, speed test will start
automatically.
2Press OK to go to the list on network status confirmation screen.
Note(s)
•If the connection test for both home network and internet pass, you are ready to use Net TV or
network upgrade functions using the internet without making any additional settings.
•If the connection test fails, check if the Ethernet cable is connected to this TV properly or if you
have entered all the required details for the wireless LAN connection properly.
Setting status
You can check the status of network settings.
1Use to select Setting status, then press OK.
•Network setting list will be displayed.
•MAC address of this unit will be displayed in the list.
44 .English
Continued on next page.
Home network
You can turn your TV into a Digital Media Renderer (DMR), which can play
video, music and photo files stored on certified home media servers
connected to your home network.
1Use to select Home network, then press OK.
2Use to select the item you want to adjust, then press OK.
Renderer
Off Disable DMR.
On Enable this unit to play files using
DMC.
Renderer name Change the display name of this TV to other
devices on the home network.
Wake-on-LAN(DIAL)
You can turn your TV on when you use remote control via IP.
1Use to select Wake-on-LAN(DIAL), then press OK.
2Use to select On or Off, then press OK.
Off To set Wake-on-LAN(DIAL) to off.
On To set Wake-on-LAN(DIAL) to on.
Net TV
Displays the deactivation settings for Net TV, Netflix ESN and Netflix
software version.
Netflix deactivation
Displays the deactivation setting for Netflix.
1Use to select Net TV, then press OK.
2Use to select Net TV deactivation, then press OK.
3Use to select Netflix, then press OK.
4Use to select the desired option, then press OK.
Yes Deactivate the connection to Netflix.
No Activate the connection to Netflix.
VUDU deactivation
Displays the deactivation setting for VUDU.
1Use to select Net TV, then press OK.
2Use to select Net TV deactivation, then press OK.
3Use to select VUDU, then press OK.
4Use to select the desired option, then press OK.
Yes Deactivate the connection to VUDU.
No Activate the connection to VUDU.
YouTube deactivation
Displays the deactivation setting for YouTube.
1Use to select Net TV, then press OK.
2Use to select Net TV deactivation, then press OK.
3Use to select YouTube, then press OK.
4Use to select the desired option, then press OK.
Yes Deactivate the connection to YouTube.
No Activate the connection to YouTube.
Netflix ESN
Displays the ESN information.
1Use to select Net TV, then press OK.
2Use to select Netflix ESN, then press OK.
•Displays the ESN (Electronic Serial Number) to get any services
from Netflix.
Netflix software version
Displays the Netflix version.
1Use to select Net TV, then press OK.
2Use to select Netflix software version, then press OK.
Samba interactive TV settings
Displays the setting for Samba TV.
To learn more about Samba TV, please visit https://www.samba.tv/
1Use to select Samba interactive TV settings, then press OK.
2Use to select the desired option, then press OK.
Note(s)
•Samba interactive TV settings item is displayed only when the country setting is USA.
Reset network settings
You can reset the status of network settings.
1Use to select Reset network settings, then press OK.
2Use to select the desired option, then press OK.
45 .English
Continued on next page.
Update software
Philips continuously tries to improve its products and we strongly
recommend that you upgrade the TV software when upgrades are
available.
New software can be downloaded from our website at
www.philips.com/support using the model number of your TV to find
information.
You can update the software through these methods:
•Update with USB memory stick
•Update from digital broadcast Update notification p. 47
This section describes how to upgrade the software by using USB memory
stick.
Preparing for the software upgrade
You require the following equipment:
–A PC with web browsing capability
–An archive utility that supports the ZIP-format
(e.g. WinZip for Windows or StuffIt for Mac OS)
–An empty clean formatted USB memory stick
Note(s)
•Only FAT / DOS-formatted portable memory is supported.
•Use only software upgrades that can be found on the Philips web site.
Warning
•When the software upgrade is running, don’t press any buttons.
•Do not remove the USB memory stick during the software upgrade.
•If an error occurs during the upgrade, retry the procedure or for further assistance, please contact
call center.
Downloading the software
Find information and software related to your TV and download the latest
software upgrade file to your PC.
Prepare a blank USB memory stick for software update. Access
www.philips.com/support and download the latest version software to
a blank USB memory stick using a PC by following the directions described
on the website.
•Use a blank USB memory stick, download the software on your PC and
write the software in the root directory of the USB memory stick.
•For more details on how to download the software, please refer to the
website.
USB upgrade
You can upgrade the software by using USB memory stick.
1Connect your USB memory stick with the upgrade file to the USB
terminal on the side of your TV.
2Press and use to select Setup, then press OK.
3Use to select Update software, then press OK.
4Use to select USB, then press OK.
5Use to select the desired update file, then press OK.
6Use to select Yes, then press OK.
•Read the on-screen instructions and confirm that you want to
continue with the installation.
Do not remove the USB storage device or turn the TV o
while upgrade is in progress.
Software update is in progress. Please wait.
7When the software upgrade is completed, press to set the unit into
standby mode, then remove the USB memory stick.
8Unplug the AC power cord for a few seconds from AC outlet and plug
it again.
9Press again to turn the unit on.
•The TV starts up with the new software.
•For further assistance, please contact call center.
46 .English
Continued on next page.
Network updates
You can update the software by connecting the unit to the internet.
1Press and use to select Setup, then press OK.
2Use to select Update software, then press OK.
3Use to select Network, then press OK.
4Use to select Yes, then press OK.
•This unit will then start checking for the latest FirmWare (software)
version.
5Confirmation message will appear.
Use to select Yes, then press OK.
•The unit will start downloading the latest FirmWare (software)
version.
•The unit will start updating the FirmWare (software) version.
•It may take a while to complete the updating.
6When the software update is complete, press to make sure the unit
goes to standby mode.
7Unplug the AC power cord for a few seconds from AC outlet and plug
it again.
8Press again to turn the unit on.
•The TV starts up with the new software.
For further assistance, please contact call center.
Note(s)
•In order to update software via the Internet, you must connect the unit to the Internet and set
up necessary settings.
Connect to network p. 41
Network settings p. 42
•Please do not unplug the AC power cord or Ethernet cable while executing the Network
updates.
•All settings will remain the same even if you update the software version.
•The version of net service will also be updated if newer version of net service is available when
updating the firmware.
•When you start up the TV or a net service after executing the software update, a message may
appear on the screen prompting for software update again. In this case, please select Update
to start USB update or network update. For further assistance, please contact call center.
Software settings
Software
1Press and use to select Setup, then press OK.
2Use to select Software settings, then press OK.
3Use to select Software, then press OK.
Checking your current software version number
1Use to select Software information, then press OK.
•The version and a description of the current software is displayed.
Update notification
You can download the latest software through the air and update this unit
automatically while the unit is in standby mode.
1Use to select Update notification, then press OK.
2Use to select the desired option, then press OK.
Off Disable auto-update for latest software.
On A message will appear if there is the latest software on
the network server.
License
Displays the licenses of open source software used in this unit.
1Use to select License, then press OK.
•Licenses of open source software used in this unit are displayed.
Digital rights management
This product contains technology subject to certain intellectual property
rights of Microsoft. Use or distribution of this technology outside of this
product is prohibited without the appropriate license(s) from Microsoft.
1Use to select Digital rights management, then press OK.
•Digital rights management is displayed.
47 .English
Continued on next page.
Wireless Screencasting
You can wirelessly cast or mirror the screen of your Smartphone, Tablet
or PC to the TV directly using Wireless Screencasting.
Using Wireless Screencasting
1Press and use to select Wireless Screencasting, then press
OK.
•Wireless Screencasting mode screen appears.
PHILIPS_Smart_TV
If you want to manage connected device history, please press "OPTIONS".
If you want to exit, please press "BACK" key.
Your TV name
The TV is now ready to accept a connection from your source device.
2Activate Wireless Screencasting feature on your device.
•For the operation of your device, please check the instruction
manual of the device.
•Select Your TV name on your device if needed.
•If PIN code is required on your device, please enter the 8-digit code
appearing in the left-hand side of the TV screen.
3Once connected, the screen of your device will appear on your TV
screen.
•Press INFO to display your device name at the bottom of TV
screen.
•Press
. or OK to pause playback. Press
. or OK again to resume
playback.
Using Wireless Screencasting device list
In Wireless Screencasting device list, you can find the connected devices.
1Press OPTIONS on remote when Wireless Screencasting mode is
on the TV screen.
•Only the connected device names are listed.
•It will be sorted from newest connection to oldest connection. A
maximum of 64 connections can be recognized.
•If you would like to delete a listed connection, press to select
the device name, then press OK first. Once the confirmation
message appears, please use to select Yes, then press OK.
Note(s)
•P&F USA Inc. / P&F MEXICANA S.A. de C.V. do not warrant Wireless Screencasting compatibility
with all source devices such as smartphones, tablets, laptops, etc. due to large variability in
hardware, firmware, drivers, software and implementation of wireless casting applications on
these source devices. Although P&F USA Inc. / P&F MEXICANA S.A. de C.V. will strive to enhance
compatibility and performance across a range of source devices, P&F USA Inc. / P&F MEXICANA
S.A. de C.V. do not warrant compatibility with specific source devices.
View photos, play music and watch videos
using home network
On your TV you can play video, music and photo files stored on home
network certified home media servers connected to your home network.
In order to use this feature, you must connect this unit to the internet.
It is recommended that files to be played back in this unit are recorded
under the following specifications:
Picture (JPEG / Progressive JPEG)
JPEG Upper limit 4000x4000 pixels
Progressive JPEG Upper limit 1024x768 pixels
Music (MP3)
MP3 Sampling frequency 32 kHz or 44.1 kHz or 48
kHz
Constant bit rate 32 kbps - 320 kbps
Video (MPEG / VOB / AVI / MP4)
Maximum video H.264, H.265/HEVC: 3840x2160@30fps,
MPEG: 1920x1080@60fps
Extension .avi .mpg,
.mpeg
.ts,
.trp,
.tp
.vob .mp4 .mkv
Video
codec
Audio
codec
MPEG1,
MPEG2,
MPEG4,
H.264
MPEG1,
MPEG2,
MPEG4
MPEG1,
MPEG2,
H.264,
H.265/
HEVC
MPEG1,
MPEG2
MPEG1,
MPEG2,
MPEG4,
H.264,
H.265/
HEVC
MPEG1,
MPEG2,
MPEG4,
H.264,
H.265/
HEVC
Dolby Digital YES YES YES YES YES YES
MPEG1/2 audio
layer1/2/3 YES YES YES YES NO YES
LPCM YES YES YES YES YES YES
AAC-LC YES YES YES YES YES YES
Note(s)
•A maximum of 1,023 folders or files can be recognized.
•For the home server list, maximum of 16 servers can be displayed.
•The 10th and deeper hierarchies cannot be displayed.
•Unplayable files in the home server will not be displayed in the file list.
•For some files, playback is not available even if displayed in the file list.
•In order to play back the contents in home servers, the player and the servers must be connected
to the same access point.
•Compatibility and available playback function may differ depending on the home server.
•Video files with unsupported audio format will be skipped.
•The quality of the playback picture or audio differs depending on your network condition
48 .English
Continued on next page.
Before using home network
Follow the procedure below before using home network.
1Connect this unit to the internet.
Connecting the TV to the internet using an Ethernet cable p. 17 or
Connecting the TV to the internet using a wireless LAN p. 18
•Broadband internet connection of 8Mbps or faster is required.
2Set up the necessary network connection settings.
Connect to network p. 41
Using home network
1Start home network media servers in your home network.
•For details, refer to the instruction book of the home network
certified device.
2Press on the remote control.
3Use to select Home Network.
•This unit will start loading the home server list.
4After loading, home server list will appear. Select a home server you
want to access, then press OK.
Guide to home network
a
bc
Blue hills
Video10
Highway Blues
Folder
Video
Photos
Audio
Server 3
Server 2
Server 1
00:05:28
d
e
bc
Blue hills
Video10
Highway Blues
Highway Blues
Artist
Current folder
Folder
Video
Photos
Audio
Home server list
Folder / media icon
Group (folder) / file list
Image
Current file info
View your pictures using home network
1Press to select a file or a folder.
2Press OK or . to start a slide show of the files.
•Press OK or . to pause the slide show.
The . icon appears.
•Press 0 or / to move between images.
•Press BACK or . to stop the slide show.
•Press OPTIONS to display the optional menu, then use to
select the desired item.
Voice guide
toggle *1
Off Sets Voice guide to off.
On Sets Voice guide to on.
Repeat *2
Off Sets repeat playback to off.
One Sets repeat playback for a selected image file.
All Sets repeat playback for all image files in the
current folder.
Slide time *2
Short Switches to the next image in 5 seconds.
Medium Switches to the next image in 10 seconds.
Long Switches to the next image in 15 seconds.
Transitions *2
None No effect when switching images.
Dissolve Overlaps the next image on the current image.
Wipe right Pushes the current image out from left.
Wipe left Pushes the current image out from right.
Wipe up Pushes the current image out from bottom.
Wipe down Pushes the current image out from top.
Box in The next image comes to the center from the
outside.
Box out The next image goes to the outside from the
center.
Auto
picture *2
Selects the picture mode according to your preference.
(Standard, Natural, Vivid, Sports, Movie, Game, Energy saving
and Internet video)
Rotate *3
0Displays an image in its original direction.
90 Rotates an image 90 degrees clockwise.
180 Rotates an image 180 degrees clockwise.
270 Rotates an image 270 degrees clockwise.
Zoom *3
1X Displays an image in its original size.
2X Magnifies a current image by 2 times.
4X Magnifies a current image by 4 times.
*1 Voice guide toggle is available in slide show and pause mode.
*2 You can set Repeat, Slide time, Transitions and Auto picture when
images are in slide show.
*3 You can set Rotate and Zoom when slide show is in pause mode.
49 .English
Continued on next page.
Listen to music using home network
1Press to select a file or a folder.
2Press OK or . to play the selected files.
•Press OK or . to pause, press OK or . again to resume.
•Press / to skip up the next file.
•Press 0 to skip down the previous file.
•Press . to stop playback.
•Press OPTIONS to display the optional menu, then use to
select the desired item.
Voice guide
toggle *
Off Sets Voice guide to off.
On Sets Voice guide to on.
Repeat
Off Sets repeat playback to off.
One Sets repeat playback for a selected music
file.
All Sets repeat playback for all music files in
the current folder.
Shuffle
Off Sets shuffle playback to Off.
On Sets shuffle playback for all music files in
the current folder.
TV Speakers
Off The sound will not be output from the
unit's speakers.
On The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink compliant devices
with VOL + / – by using this unit's remote
control.
Auto sound Selects the sound mode according to your preference.
(Standard, Vivid, Sports, Movie, Music and News)
*Voice guide toggle is available in slide show and pause mode.
Watch videos using home network
1Press to select a file or a folder.
2Press OK or . to play the selected files.
•Press OK or . to pause, press OK or . again to resume.
•Press / to fast-forward search.
•Press 0 to fast-backward search.
•Press . to stop playback.
•Press
. to resume from the point at which playback was stopped.
Press OK to play from the beginning of the file at which playback
was stopped.
•Press CH + to play the next file.
•Press CH - to play the current file at the beginning.
Press CH - twice within 5 seconds to play the previous file.
•Press OPTIONS to display the optional menu, then use to
select the desired item.
Voice guide
toggle *
Off Sets Voice guide to off.
On Sets Voice guide to on.
Repeat
Off Sets repeat playback to off.
One Sets repeat playback for a selected video
file.
All Sets repeat playback for all video files in
the current folder.
TV speakers
Off The sound will not be output from the
unit's speakers.
On The sound will be output from the unit's
speakers.
Speakers
EasyLink
You can control audio output from your
connected EasyLink compliant devices
with VOL + / – by using this unit's remote
control.
Auto picture
Selects the picture mode according to your preference.
(Standard, Natural, Vivid, Sports, Movie, Game, Energy
saving and Internet video)
Auto sound Selects the sound mode according to your preference.
(Standard, Vivid, Sports, Movie, Music and News)
*Voice guide toggle is available in slide show and pause mode.
Note(s)
•The resume information will be kept even when the unit is Turned off.
•If you play another file while the previously viewed file is being resumed, the resume information
of the previously viewed file will be deleted.
•The file or the folder in resume stop mode will be highlighted in gray on List or Thumbnails.
50 .English
Continued on next page.
Net TV
Net TV offers internet services for your TV. Use the TV remote control to
browse the Net TV pages. You can play movies, listen to music and much
more, all from your TV screen.
–Because Net TV is an online system, it can be modified over time to
better serve its purpose.
–Some Net TV services can be added, changed or stopped after some
time.
–You cannot download and save files or install plug-ins.
Before using Net TV
Follow the procedure below before using Net TV.
1Connect this unit to the internet.
2Set up the necessary network connection settings.
(Refer to Connect to network p. 41)
Using Net TV
1Press NETTV.
•Net TV screen will appear, then use to select service icon.
•For the first time only, Terms of Use screen will appear. After
confirming the content, use to select Agree, then press OK.
Guide to Net TV menu screen
Net TV start screen
4
3
5
21
6
Country: USA
Terms of UseOption
Featured AppsNow on TV
Now on TV :Displays the image of the input under present
tuning.
Featured Apps :Displays fixed net service icons.
Selected Apps :Displays movable net service icons.
Country :Selects what country you live in.
Terms of Use :Displays a copy of net service.
Option :Remove or move App.
My Apps functions
Remove App
1Use to select the desired App, then press OPTIONS.
2Use to select Remove App, then press OK.
•The selected App will be removed from My Apps list.
Move App
1Use to select the desired App, then press OPTIONS.
2Use to select Move App, then press OK.
•The selected App icon will be smaller.
3Use to the point you want to place, then press OK.
Guide to App Gallery
a
b
c
All
App Gallery
Category menu: List of category menu.
Icon list: Displays unregistered net service icons on My
Apps list.
Page guide: Displays the order of pages. The current page
will be highlighted.
1Press NETTV, then use to select App Gallery.
2Use to select the desired App in My Apps list, then press
OK.
•You can also choose from Category menu. Use to select
All, then use OK to select the desired category.
•If you select Add, the selected App icon will be placed at the end
of My Apps list.
•If you select Add and move, the selected App icon will be smaller
and use to the point you want to place, then press OK.
Even if you press BACK to cancel this function, the selected App
icon will be placed at the end of My Apps list.
Information on network services
For detailed information on 3rd party internet services, please visit the
service providers website:
Netflix :http://www.netflix.com
VUDU :http://www.vudu.com
CinemaNow :http://www.cinemanow.com
For additional help, refer to the Frequently Asked Questions FAQs at
www.philips.com/support.
Select TV and enter your model number.
51 .English
Continued on next page.
Pandora operations
With this unit, you can instantly listen to personalized radio stations
streamed over the internet from Pandora.
To learn more about Pandora, please visit www.pandora.com
Activating Pandora
In order to listen to internet radio streamed from Pandora via the internet,
you must create a Pandora account and activate this unit.
1Press NETTV, then use to select PANDORA.
2Use to select I am new to Pandora., then press OK.
3Note the activation code and website address displayed on the TV
screen.
4On your PC, visit the website address noted at step 4.
5Follow directions on the website to create your account.
6On this unit, select Go Back and press OK to complete activation.
Adding Pandora user accounts
You can add the Pandora user account.
1Press NETTV, then use to select PANDORA.
2Use to select I have a Pandora account., then press OK.
3Enter your e-mail address, then press OK while OK is selected.
4Enter a password, then press OK while OK is selected.
5Use to select Sign In, then press OK.
•Your account is added to the user list and player screen appears
on the TV screen.
Note(s)
•Pandora is available only in the United States.
•You can add up to 5 accounts.
Creating a new station
By entering your favorite artists or tracks, Pandora selects music and
creates a new station for you on the basis of the entered information.
1On the station list screen, Use to select New Station, then
press OK.
2Enter a name of your favorite artist or tracks, then press OK while OK
is selected.
•Search result will appear on the right side of the TV screen.
•If the selection screen with the result type appears, use
to select
the desired type, then press OK.
3Use to select the desired station, then press OK to start the
playback.
/ .
Resumes the playback / pause the playback.
Resumes the playback.
.Pauses the playback.
Skips to the next track.
Note(s)
•On the Tool Menu, you can delete or rename the currently selected station.
Guide to the player screen
On the player screen, you can set various options to the currently playing
track.
XXXXX
XXXXX
ABC
American Oldies Radio
4:52 0:00
on
by
c
ba
defg
Artist name : Displays artist name.
Album name : Displays album name.
": Give thumbs up to the currently playing track.
Pandora will play tracks similar to the track.
#: Give thumbs down to the currently playing
track. Pandora will skip and will not play the
track.
/ .: Resumes the playback / pause the playback.
2: Skips to the next track.
!$: Displays the Tool menu.
52 .English
5 Useful tips
FAQ
Question Answer
My remote control does not
work.
What should I do?
•Check the antenna or cable connection to the main unit.
•Check the batteries on the remote control.
•Check if there is an obstacle between the infrared sensor window and the remote control.
•Test the IR signal output use IR signal check. p. 56
If okay, then possible infrared sensor trouble.
•Aim the remote control directly at the infrared sensor window on the front of the unit.
•Reduce the distance to the unit.
•Re-insert or replace the AAA batteries with their polarities (+/–) as indicated on the remote control battery area.
•When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal on this unit.
Move the infrared-equipped device away from this unit, change the angle of the device's infrared sensor or turn off the
infrared communication function.
How come the initial setup
appears every time I turn on
this unit?
•Make sure to complete the initial setup before the unit goes into standby mode.
Why can I not watch some RF
signal TV programs?
•Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously
unavailable channels are broadcast.
•Make sure auto programming has been completed. p. 38
•The selected channel may not be broadcasting.
•When Auto programming is interrupted and not completed, some channels will not be received. Make sure to complete
the Autoprogram. p. 38
•The selected channel cannot be viewed by the Child lock setting. p. 39
•The unit requires some kind of antenna input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital or
VHF / UHF) or an RF coaxial cable from your wall cable or set-top box needs to be plugged into the unit.
How come there is no image
from the connected external
devices?
•Check if the correct input mode is selected by pressing SOURCE. p. 23
•Check the antenna, cable or other input connection to the unit.
•When using the component video connection check that the green (Y), blue (Pb/Cb) and red (Pr/Cr) connectors are
connected to their corresponding colored jacks on the unit.
When I enter a channel
number, why does it change
automatically?
•Many digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying
the broadcasting station's channel number. These basic numbers used for the previous analog broadcasts. (e.g., input
digital ch# 30 automatically changes to digital ch# 8.1)
Why are captions not
displayed entirely?
Or why are captions delayed
behind the dialog?
•Closed captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning
production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective
editing is used to insure that the closed captions remain up-to date with the current TV screen dialog.
How can I set the clock? •There is no clock function on this unit.
My PIN code no longer
works, how can I change the
child lock setting?
•Although the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN code in
Child lock. p. 39
When you forget your PIN code, enter 07 1 1 in Change PIN to reset the PIN code. p. 40
When I start up the TV or a
net service, a message
appears on the screen
prompting for software
update again.
•When you start up the TV or a net service after executing the software update, a message may appear on the screen prompting for software
update again. In this case, please select Update to start USB update or network update. p. 46
53 .English
Continued on next page.
Troubleshooting tips
If the unit does not perform properly when operated as instructed in this manual,
P
Please check the following Troubleshooting tips and all connections once before calling for service.
Power
No power
•Make sure the AC power cord is plugged in.
•Make sure that the AC outlet supplies the proper voltage, plug another electrical
appliance into the AC outlet to ensure that the AC outlet operates normally.
•If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit
to reset itself.
Remote
Control buttons do not work.
•Do NOT press more than one button at the same time.
•Ensure that no buttons on the remote control are depressed and move freely.
Universal remote control does not work properly.
•Refer to the User manual of the universal remote control for the Philips code.
Picture
Power is on but no screen image.
•Check whether the connection for the antenna, cable or set-top box is
connected correctly.
•Check whether all the cables to the unit are connected to the correct output jack on
your separate device like Blu-ray disc / DVD recorder.
•Make sure that the selected input mode is connected to the working input jack.
•Check if your computer is NOT in sleep mode when the input mode on this unit
is in PC mode. Tap any key on the computer keyboard to wake it up.
•Check if the correct input mode is selected by pressing SOURCE.
No color
•View other TV channels. The problem might be limited to the broadcasting
station.
•Adjust Color in Picture settings. p. 31
Picture poor
•Adjust Contrast and Brightness in Picture settings. p. 31
•For the best picture quality, watch “High Definition” wide screen programs. If the
HD content is not available, watch “Standard Definition” programs instead.
You see pixelation on the screen.
•When the capabilities of the unit exceed the capabilities of the digital
broadcasting, the signal will be increased to match the capabilities of the display
on the unit. This may cause pixelation, noise or trash.
Unusual picture appears and the TV does not operate.
•Press the power button first. If it does not solve, follow the procedure below.
Press the buttons on the remote control in the order shown below.
Unplug the AC power cord, then wait for 1 minute, and then plug it in again.
Sound
No sound is heard when using the HDMI digital connection.
•Some HDMI cables and devices may not be compatible with the TV due to
different HDMI specifications.
No sound, distorted sound or incorrect audio sound is heard when using the
HDMI-DVI connections.
•Make sure that the analog audio signals from the HDMI-DVI device are
connected to the analog audio input L/R jacks.
•When using Component analog video or Composite analog video, make sure
that the analog audio (L/R) connectors are mounted into the audio (L/R) input
jacks.
Sound intermittent or no sound.
•Check if the audio cable is connected into the unit correctly.
You switch to a different input and the volume changes.
•This unit will memorize the volume level from the last time you adjusted it.
•If the volume of the sound from another device is higher or lower, then the
loudness will change.
•Make sure Auto volume leveling is set to On. p. 33
Picture & Sound
No sound with distorted picture occurs when using the HDMI digital connection.
•Some HDMI cables and devices may not be compatible with the TV due to
different HDMI specifications.
No picture or sound
•Check if the power is on.
•Check whether all the cables to the unit are connected to the correct output jack on
your separate device like Blu-ray disc / DVD recorder.
•View other TV channels. The problem might be limited to the broadcasting station
or weak signal strength.
•Unplug the AC power cord and wait for about 1 minute, then plug the AC power
cord and turn on the unit again.
•Check whether the connection of the antenna or cable / satellite set-top box is
connected correctly.
•Make sure that the selected input mode is connected to the working input jack.
•Check if your computer is NOT in sleep mode when the input mode of this unit
is in PC mode. Tap any key on the keyboard to wake up your computer.
•Make sure that the sound is not muted. Press so that the volume bar and
current volume level will appear on the TV screen.
•Make sure that the volume is NOT set to 0 or . If so, use VOL + / – to adjust to
the desired volume.
•Make sure that the headphone is NOT connected to the headphone audio
output jack.
•Make sure that the TV speakers is NOT set to Off.
•If there are issues with picture/color and/or sound when connecting an external
device using the HDMI port, please try switching the HDMI mode. (Refer to HDMI
mode p. 35)
Adjusted Picture or Sound settings are not effective every time the unit is turned
on.
•You must set Home in Location. p. 35 (Otherwise, the settings you adjusted
will not be memorized after the unit goes into standby mode.)
You see a distorted picture or hear an unusual sound. (Analog TV - NTSC
signal)
•You may be getting NTSC (Analog) TV signal (not HDTV signal) interference from
electrical appliances, automobiles, motorcycles or fluorescent lights.
•Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture.
•Electrical interference from nearby appliances may affect picture quality.
•View other TV channels. The problem might be limited to the broadcasting station
or weak signal strength.
Picture poor, sound intermittent or no sound
•View other TV channels. The problem might be limited to the broadcasting station
or weak signal strength.
Child and rating lock
Forgotten PIN code.
•Enter “07 1 1” to clear your password.
Screen
You switch to a different input and the screen size changes.
•This unit will memorize the viewing mode from the last time you used the
particular input modes.
The display image does not cover the entire screen.
•If you are using the unit as a PC monitor, make sure that Horizontal position and
Vertical position in Picture are set correctly. p. 31
•If you are watching TV or using the Composite video, Component video or HDMI
with 480i input, press FORMAT repeatedly to switch to various screen
modes.
Different color marks on the TV screen
•View other TV channels. The problem might be limited to the broadcasting
station, missing data or pixelation due to weak signal strength.
54 .English
Continued on next page.
Closed captions
Closed captions are displayed as a white box. No closed captions are displayed
in the closed captions-supported program.
•Interference from buildings or weather conditions may cause closed captions to
be incomplete if watching analog TV signals.
•Broadcasting station may shorten the program to insert advertisements.
The closed caption decoder cannot read the information of the shortened
program.
Black box is displayed on the TV screen.
•The text mode is selected for caption. Select CC-1, CC-2, CC-3 or CC-4.
Software update
A message appears on the screen prompting for software update again.
•When you start up the TV or a net service after executing the software update, a
message may appear on the screen prompting for software update again. In this
case, please select Update to start USB update or network update. p. 46
Network
Cannot connect to the network.
•Check if the Ethernet cable connection is properly made. Turn on the broadband
router and/or modem.
•Check the network settings.
•Check if the broadband router and/or modem is correctly connected.
Sometimes video quality is poor when using the wireless LAN.
•The wireless network connection quality varies depending on the distance or
obstacles (e.g. wall, basement, 2nd floor) between the TV wireless LAN adapter
and the wireless router (access point), from other wireless networks, and brand
and type of the wireless router (access point). When using the wireless LAN of
the TV, it is suggested to place the wireless router as close as possible to the
television.
Wireless LAN connection fails or wireless connection is poor.
•Check the installation location of the TV and wireless router (access point). Signal
quality may be affected for the following reasons.
–Interference of other wireless devices, microwaves, fluorescent lights, etc., are
placed nearby.
–There are floors or walls between the wireless router and TV.
–If the problems continue even after checking the above, try making a wired
LAN connection.
Cannot use the wireless connection.
•Check if the wireless LAN Access Point (AP) (e.g. wireless router) is oriented
properly or not placed too close between them.
•Once you have activated the wireless connection please wait 30 seconds for the
connection to be established after turning on the unit, before trying to access
network features such as Net TV.
Cannot use Netflix feature.
•Check if the network connection is properly made.
•Visit http://www.netflix.com on your PC and become a Netflix member.
•Some network services may not be available in your country.
Cannot add movies or TV episodes to the Instant Queue.
•Visit www.netflix.com on your PC.
Even though the speed of the internet connection improves during playback,
the picture quality of Netflix streaming movie does not improve.
•The picture quality does not change during playback. It differs depending on the
speed of internet connection at the time of loading.
Cannot use VUDU feature.
•VUDU is available only in the United States and Mexico.
•Check if the network connection is properly made.
Cannot rent or buy movies / TV episodes on VUDU.
•You need to activate the VUDU account. For detailed information, please visit
the service providers website at http://www.vudu.com
•Log into your account at http://my.vudu.com and check your payment
information.
The picture quality of streaming movie (Netflix, VUDU or CinemaNow) is poor.
•Check the speed of your internet connection. You need speeds of at least 8 Mbps
to this player for high quality uninterrupted playback.
Streaming movie (Netflix, VUDU or CinemaNow) often stops or starts buffering
during playback.
•Contact your internet service provider to troubleshoot your internet connection
for speed and line quality. Consistent line quality and speed are very important
for internet video playback.
Cannot connect to the network while my PC is connected to the network.
•Check the content of your internet service contract to see if your internet service
provider prevents multiple terminals connecting at the same time.
Cannot use Easy Connect to connect to the access point.
•Connect the unit to the access point using scan or manual entry mode. If the
access point’s security mode is set to WEP*, change the setting to others
(recommended), then try Easy connect again. (For access point configuration,
please consult its user manual or manufacturer.)
*WEP is not recommended to be used due to its major security flaws. Change the security
protocol on the wireless router to others (recommended) mode.
Folder or files stored on home network media server are not displayed in the file
list or cannot be played back.
•Check the setting on your home media server. (Refer to the user manual of the
home media server.)
•Check the network connection and settings.
Cannot use Pandora feature.
•Check if the network connection is properly made.
•Pandora is available only in the United States.
•You must create a Pandora account and activate this unit.
Activating Pandora p. 52
Wireless Screencasting
•Connectivity with all Wireless Screencasting compatible devices is not
guaranteed.
•Devices that do not comply with Wireless Screencasting standards may have
compatibility issues.
Note(s)
•The LCD screen is manufactured to provide many years of useful life.
Occasionally a few non active pixels may appear as a fixed point of blue, green
or red.
This is not to be considered a defect in the LCD screen.
•Some functions are not available in specific modes, but this is not a malfunction.
Read the description in this manual for more details on correct operations.
For additional troubleshooting, refer to the Frequently Asked Questions
or FAQs on www.philips.com/support.
55 .English
6 Information
Glossary
Analog TV (NTSC)
Acronym that stands for National Television Systems Committee and the
name of analog broadcasting standards.
Off the air analog TV signals are no longer being sent by major broadcasting
stations in the USA.
ARC (Audio Return Channel) (HDMI 2 only)
HDMI-ARC allows you to use Philips EasyLink to output TV audio directly to
a connected audio device, without the need for an additional digital audio
cable. Be sure that the device is HDMI CEC and ARC compliant, and that the
TV is connected to the device using an HDMI cable attached to both HDMI-
ARC connectors.
Aspect ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in
other words, the TV screen is almost square); widescreen models are 16:9 (the
TV screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand devices
with CEC feature and this unit. We do not guarantee 100% interoperability with
other brands of CEC compliant devices.
Component video
This is a Video signal format that conveys each of 3 principal colors of light
(red, blue and green) through different signal lines. This allows the viewers to
experience picture colors as original as it is. There are several signal formats,
including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress digital sound. It
offers stereo sound (2ch) or multi-channel audio.
DTV (ATSC)
Abbreviation that stands for Advanced Television Systems Committee and
the name of the digital broadcasting standards.
E-sticker
E-sticker is showing set features, technical information, etc on this TV set that
is displayed on the TV screen mainly used by TV retailers. Previously the
information was on a printed sticker that was put on the display.
HDMI (High-Definition Multimedia Interface)
Interface that supports all uncompressed, digital audio / video formats
including set-top box, Blu-ray / DVD recorder or digital television, over a single
cable.
HDR
HDR stands for High Dynamic Range. By using additional data encoded with
the source signal, HDR capable products offer greater contrast through an
expansion of the range of the image’s color luminance. The source, cable and
display must all support HDR.
HDTV (High-Definition TV)
Ultimate digital format that produces high resolution and high picture quality.
PIN code
A stored 4-digit number that allows access to parental control features.
SAP (Secondary Audio Program)
Second-audio channel delivered separately from the Main-audio channel.
This audio channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard digital format that is similar to the analog TV picture quality.
Sonic Emotion Premium
Sonic Emotion Premium fills your surroundings with the right ambience,
clarifies voice, and details the sound stage, making your experience more
immersive and enjoyable.
Maintenance
Cleaning
•Clean the front panel and other exterior surfaces of the unit with a soft
microfiber cloth or lens brush. Before cleaning the panel, disconnect the
AC power cord.
•Never use a solvent or alcohol. Do not spray insecticide liquid near the
unit. Such chemicals may cause damage and discoloration to the
exposed surfaces.
•Do not spray any liquids on the screen or other exterior surfaces of this
unit. If liquids enter the unit, they could cause shorts, electric shocks or
fire damage.
Servicing
Should your unit become inoperative, do not try to correct the problem
yourself. There are no user serviceable parts inside. Call our toll free
customer support line found on the cover of this User manual to locate
an authorized service center.
IR signal check
If the remote control is not working properly, you can use a digital or cell
phone camera to see if it is sending out an infrared signal.
e.g.) With a digital camera:
Point the digital camera towards the remote
control infrared diode at the front of the
remote control. Press and hold any key on
the remote control and look at the camera
display. If an infrared pulsating light appears
on the display, the remote control is sending
out an IR signal.
Note: Some cameras may have an IR filter
or dual camera cell phones may have an IR filter in one of the camera's
and both will not display the IR signal.
56 .English
7 Specifications
178° (V) by 178° (H)
ATSC (digital) / NTSC (analog)
Mono, Stereo, Sonic Emotion Premium
10W x 2
5 band
Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 / Wide screen
Automatic / 4:3 / Wide screen / Full / Unscaled
Full / Unscaled
JPEG, Progressive JPEG
MP3
MPEG1, MPEG2, H.264, MPEG4, H.265/HEVC
Over-the-Air DTV
(ATSC)
: VHF: 2∼13
Over-the-Air Analog
(NTSC)
: VHF: 2∼13
UHF: 14∼69
2∼13, A∼W
W+1∼W+94 (Analog W+1∼W+84), A-5∼A-1, 5A
1
1
3 (selectable HDMI modes)
1
Supporting wireless standards : IEEE 802.1 1a/b/g/n/ac (2.4GHz/5GHz)
1
1
Supporting Dolby Audio (Dolby Digital and Dolby Digital Plus)
1
1/8 inch (3.5mm)
120V∼ +/- 10%, 60Hz +/- 0.5%
41 °F (5 °C) to 104 °F (40 °C)
UHD (Ultra HD) (3840 x 2160 pixels 60Hz)
65”/ 16:9
65PFL6902 55PFL6902 50PFL6602
54.6”/ 16:9
50PFL6902
49.5”/ 16:9
UHF: 14∼69 (Each channel may have e.g. 2.1∼2.9, 3.1∼3.9, etc)
Channel frequency synthesized tuning system
Supporting video signals : 480i/p, 720p, 1080i/p @60Hz
Supporting HDMI video signals : 480i/p, 720p, 1080i @60Hz, 1080p, 2160p @24/30/60Hz
Supporting PC-input video signal up to 4096 x 2160
1 (L audio / R audio)
Via HDMI and HDMI-DVI + Analog audio L/R
Supporting HDMI digital audio signals : LPCM, AC3, DD+
Direct access number keyboard, Programmable scan, Channel +(up) / -(down) and
PREV. CH (Previous channel)
Model #
Picture
Type
Diagonal screen size / Aspect ratio
Viewing angles
Built-in digital / analog tuner
Sound
Mono / Stereo
Power output (RMS watts)
Equalizer
Ease of use
Picture format
SD (4:3 source)
HD
(16:9 source)
UHD
Photo slide show
Music playback
Video playback
Channel
Channel coverage
CATV (Analog NTSC)
Tuning system
Channel access
Connectivity
Component video input
(Y/Pb/Pr)
Composite video input
(Shared Y green terminal
with component video)
HDMI input
Analog audio L/R input
PC input
USB
Wireless LAN
Ethernet port
Digital audio output
Headphone output
Power
Power requirements
Temperature
Operating temperature
•Specifications are subject to change without prior notice.
57 .English
8 Warranty
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248
LIMITED WARRANTY
ONE (1) YEAR
WARRANTY COVERAGE:
This warranty obligation is limited to the terms as set forth
below.
WHO IS COVERED:
This product warranty is issued to the original purchaser or
the person receiving the product as a gift against defects in
materials and workmanship as based on the date of original
purchase (“Warranty Period”) from an Authorized Dealer. The
original sales receipt showing the product name and the
purchase date from an authorized retailer is considered such
proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material or
workmanship occurs and a valid claim is received within the
Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a
product that is new or which has been manufactured from
new, or serviceable used parts and is at least functionally
equivalent or most comparable to the original product in
current inventory, or (3) refund the original purchase price of
the product.
Replacement products or parts provided under this warranty
are covered against defects in materials and workmanship
from the date of the replacement or repair for ninety (90)
days or for the remaining portion of the original product’s
warranty, whichever provides longer coverage for you. When
a product or part is exchanged, any replacement item
becomes your property and the replaced item becomes
company property. When a refund is given, your product
becomes company property.
Note: Any product sold and identied as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements can
result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS:
This Limited Warranty applies only to new company
manufactured products that can be identied by the
trademark, trade name, or logo axed to it. This Limited
Warranty does not apply to any hardware product or any
software, even if packaged or sold with the product, as
manufacturers, suppliers, or publishers may provide a
separate warranty for their own products packaged with the
bundled product.
The company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or other additional product or
part not covered by this warranty. Recovery or reinstallation
of programs, data or other information is not covered under
this Limited Warranty.
This warranty does not apply (a) to damage caused by
accident, abuse, misuse, neglect, misapplication, or
non-supplied product, (b) to damage caused by service
performed by anyone other than company approved
Authorized Service Location, (c) to a product or a part that
has been modied without written company permission, or
(d) if any serial number has been removed or defaced, or (e)
product, accessories or consumables sold “AS IS” without
warranty of any kind by including refurbished product sold
“AS IS” by some retailers.
This Limited Warranty does not cover:
• Shipping charges to return defective product.
• Labor charges for installation or setup of the product,
adjustment of customer controls on the product, and
installation or repair of antenna/signal source systems
outside of the product.
• Product repair and/or part replacement because of
improper installation or maintenance, connections to
improper voltage supply, power line surge, lightning
damage, retained images or screen markings resulting
from viewing xed stationary content for extended
periods, product cosmetic appearance items due to
normal wear and tear, unauthorized repair or other cause
not within the control of the company.
• Damage or claims for products not being available for use,
or for lost data or lost software.
• Damage from mishandled shipments or transit accidents
when returning product.
• A product that requires modication or adaptation to
enable it to operate in any country other than the country
for which it was designed, manufactured, approved and/or
authorized, or repair of products damaged by these
modications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
• Product lost in shipment and no signature verication
receipt can be provided.
• Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE…
Contact the Customer Care Center at:
1-866-202-5960
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE
CONSUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusions or limitation of
incidental or consequential damages, or allow limitations on
how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you.
58 .English
License
P&F USA, Inc. hereby offers to deliver, upon request, a copy of the
complete corresponding source code for the copyrighted open source
code packages, on an “AS IS” basis, used in this product for which such
offer is requested by the respective licenses. This offer is valid up to three
years after the product purchase to anyone in receipt of this information.
To obtain source code, please contact P&F USA, Inc. You should write to
“Open Source Team, P&F USA, Inc., PO Box 2248, Alpharetta, GA
30023-2248. P&F USA, Inc. disclaims any and all warranties and
representations with respect to such software and related source code
including quality, reliability, usability, and accuracy, and further disclaim
all express, implied, statutory or otherwise, including without limitation,
any implied warranties of title, non-infringement, merchantability, or
fitness for a particular purpose. P&F USA, Inc. shall not be liable to make
any corrections to the open source software or source code or to provide
any support or assistance with respect to it. P&F USA, Inc. disclaims any
and all liability arising out of or in connection with the use of this software
and/or source code.
59 .English
This product has been manufactured by and is sold
under the responsibility of P&F USA, Inc., and P&F
USA, Inc. is the warrantor in relation to this product.
The Philips trademark and the Philips Shield Emblem
are registered trademarks of Koninklijke Philips N.V.
used under license.
P&F USA, Inc.
PO Box 2248, Alpharetta, GA 30023-2248 U.S.A.
P&F Mexicana, S.A. de C.V.
Av. La Palma No. 6, Col. San Fernando La Herradura.
Huixquilucan, Edo. de México. C.P. 52787
AA78BUH-65UL / AA7RBUH-55UL / AA7UBUH-50UX / AA7UGUH-50UX
䖩䖩䖩䖩䖩