Table of Contents
Philips 558M1RY/00 User Manual
Displayed below is the user manual for 558M1RY/00 by Philips which is a product in the Computer Monitors category. This manual has pages.
Related Manuals
Table of Contents
1. Important ...................................... 1
1.1 Safety precautions and
maintenance ................................. 1
1.2 Notational Descriptions ............ 3
1.3 Disposal of product and packing
material .......................................... 4
2. Setting up the display ............... 5
2.1 Installation .................................... 5
2.2 Operating the display ................ 8
2.3 Remove the Base Assembly for
VESA Mounting ..........................12
2.4 MultiView .....................................14
3. Ambiglow ....................................16
4. Image Optimization .................. 17
4.1 SmartImage ................................. 17
4.2 SmartContrast ............................. 19
4.3 HDR Settings in Windows 10
system ..........................................20
4.4 Adaptive Sync ............................. 21
5. Sound by
Bowers & Wilkins ...................... 22
6. Technical Specications ......... 23
6.1 Resolution & Preset Modes ...26
7. Power Management ................ 28
8. Customer care and warranty . 29
8.1 Philips’ Flat Panel Displays Pixel
Defect Policy .............................. 29
8.2 Customer Care & Warranty ..... 32
9. Troubleshooting & FAQs ......... 33
9.1 Troubleshooting ........................ 33
9.2 General FAQs ............................. 35
9.3 Multiview FAQs ......................... 37
1
1. Important
1. Important
This electronic user’s guide is intended
for anyone who uses the Philips display.
Take time to read this user manual
before you use your display. It contains
important information and notes
regarding operating your display.
The Philips guarantee applies provided
the product is handled properly for
its intended use, in accordance with
its operating instructions and upon
presentation of the original invoice
or cash receipt, indicating the date of
purchase, dealer’s name and model
and production number of the product.
1.1 Safety precautions and
maintenance
Warnings
Use of controls, adjustments or
procedures other than those specified
in this documentation may result in
exposure to shock, electrical hazards
and/or mechanical hazards.
Read and follow these instructions
when connecting and using your
computer monitor.
Excessive sound pressure from
earphones and headphones can
cause hearing loss. Adjustment of the
equalizer to maximum increases the
earphones and headphones output
voltage and therefore the sound
pressure level.
Operation
• Please Keep the monitor out of
direct sunlight, very strong bright
lights and away from any other heat
source. Lengthy exposure to this
type of environment may result in
discoloration and damage to the
monitor.
• Remove any object that could fall
into ventilation holes or prevent
proper cooling of the monitor’s
electronics.
• Do not block the ventilation holes
on the cabinet.
• When positioning the monitor, make
sure the power plug and outlet are
easily accessible.
• If turning off the monitor by
detaching the power cable or DC
power cord, wait for 6 seconds
before attaching the power cable
or DC power cord for normal
operation.
• Please use approved power cord
provided by Philips all the time. If
your power cord is missing, please
contact with your local service
center. (Please refer to Service
contact information listed in
Important information manual.)
• Operate under the specified power
supply. Be sure to operate the
monitor only with the specified
power supply. Use of an incorrect
voltage will cause malfunction and
may cause fire or electric shock.
• Protect the cable. Do not pull or
bend the power cable and signal
cable. Do not place the monitor
or any other heavy objects on the
cables, if damaged, the cables may
cause fire or electric shock.
• Do not subject the monitor to
severe vibration or high impact
conditions during operation.
• Do not knock or drop the monitor
during operation or transportation.
• If provided with a 3-pin attachment
plug on the power cord, plug the
cord into a grounded (earthed)
3-pin outlet. Do not disable the
power cord grounding pin, for
example, by attaching a 2-pin
2
1. Important
adapter. The grounding pin is an
important safety feature.
• Excessive usage of monitor can
cause eye discomfort, it’s better to
take shorter breaks more often at
your workstation than longer breaks
and less often; for example a 5-10
minute break after 50-60-minute
continuous screen use is likely to
be better than a 15-minute break
every two hours. Try to keep your
eyes from eye strain while using the
screen for a constant period of time
by :
• Looking at something varying
distances after a long period
focusing on the screen.
• Conscious Blinking often while
you work.
• Gently closing and rolling your
eyes to relax.
• Reposition your screen to ap-
propriate height and angle ac-
cording to your height.
• Adjusting the brightness and
contrast to appropriate level.
• Adjusting the environment light-
ing similar to that of your screen
brightness, avoid the uorescent
lighting, and surfaces that don’t
reect too much light.
• Seeing a doctor if your symp-
toms.
Maintenance
• To protect your monitor from
possible damage, do not put
excessive pressure on the LCD
panel. When moving your monitor,
grasp the frame to lift; do not lift
the monitor by placing your hand or
fingers on the LCD panel.
• Unplug the monitor if you are not
going to use it for an extensive
period of time.
• Unplug the monitor if you need to
clean it with a slightly damp cloth.
The screen may be wiped with a
dry cloth when the power is off.
However, never use organic solvent,
such as, alcohol, or ammonia-based
liquids to clean your monitor.
• To avoid the risk of shock or
permanent damage to the set, do
not expose the monitor to dust,
rain, water, or excessive moisture
environment.
• If your monitor gets wet, wipe it
with dry cloth as soon as possible.
• If foreign substance or water gets in
your monitor, please turn the power
off immediately and disconnect
the power cord. Then, remove the
foreign substance or water, and
send it to the maintenance center.
• Do not store or use the monitor in
locations exposed to heat, direct
sunlight or extreme cold.
• In order to maintain the best
performance of your monitor and
use it for a longer lifetime, please
use the monitor in a location
that falls within the following
temperature and humidity ranges.
• Temperature: 0-40°C 32-104°F
• Humidity: 20-80% RH
Important information for Burn-in/
Ghost image
• Always activate a moving screen
saver program when you leave
your monitor unattended. Always
activate a periodic screen refresh
application if your monitor will
display unchanging static content.
Uninterrupted display of still or
static images over an extended
period may cause “burn-in”, also
known as “after-imaging” or “ghost
imaging”, on your screen.
3
1. Important
• “Burn-in”, “after-imaging”, or
“ghost imaging” is a well-known
phenomenon in LCD panel
technology. In most cases, the
“burn-in” or “after-imaging” or
“ghost imaging” will disappear
gradually over a period of time after
the power has been switched off.
Warning
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or “after-
imaging” or “ghost image” symptoms
that will not disappear and cannot be
repaired. The damage mentioned above
is not covered under your warranty.
Service
• The casing cover should be opened
only by qualified service personnel.
• If there is any need for any
document for repair or integration,
please contact with your local
service center. (Please refer to
Service contact information listed in
Important information manual.)
• For transportation information,
please refer to “Technical
Specifications”.
• Do not leave your monitor in a car/
trunk under direct sun light.
Note
Consult a service technician if the
monitor does not operate normally, or
you are not sure what procedure to take
when the operating instructions given
in this manual have been followed.
1.2 Notational Descriptions
The following subsections describe
notational conventions used in this
document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text
may be accompanied by an icon and
printed in bold or italic type. These
blocks contain notes, cautions or
warnings. They are used as follows:
Note
This icon indicates important
information and tips that help you make
better use of your computer system.
Caution
This icon indicates information that
tells you how to avoid either potential
damage to hardware or loss of data.
Warning
This icon indicates the potential for
bodily harm and tells you how to avoid
the problem.
Some warnings may appear in alternate
formats and may not be accompanied
by an icon. In such cases, the specific
presentation of the warning is
mandated by the relevant regulatory
authority.
4
1. Important
1.3 Disposal of product and
packing material
Waste Electrical and Electronic
Equipment-WEEE
This marking on the product or on
its packaging illustrates that, under
European Directive 2012/19/EU
governing used electrical and electronic
appliances, this product may not be
disposed of with normal household
waste. You are responsible for disposal
of this equipment through a designated
waste electrical and electronic
equipment collection. To determine the
locations for dropping off such waste
electrical and electronic, contact your
local government office, the waste
disposal organization that serves your
household or the store at which you
purchased the product.
Your new display contains materials that
can be recycled and reused. Specialized
companies can recycle your product
to increase the amount of reusable
materials and to minimize the amount
to be disposed of.
All redundant packing material has been
omitted. We have done our utmost to
make the packaging easily separable
into mono materials.
Please find out about the local
regulations on how to dispose of your
old display and packing from your sales
representative.
Taking back/Recycling Information for
Customers
Philips establishes technically and
economically viable objectives
to optimize the environmental
performance of the organization's
product, service and activities.
From the planning, design and
production stages, Philips emphasizes
the important of making products that
can easily be recycled. At Philips, end-
of-life management primarily entails
participation in national take-back
initiatives and recycling programs
whenever possible, preferably
in cooperation with competitors,
which recycle all materials (products
and related packaging material) in
accordance with all Environmental
Laws and taking back program with the
contractor company.
Your display is manufactured with high
quality materials and components
which can be recycled and reused.
To learn more about our recycling
program please visit :
http://www.philips.com/a-w/about/
sustainability.html
5
2. Setting up the display
2. Setting up the display
2.1 Installation
1 Unpacking
1. Open the the top ap and remove
clips on the bottom of the package.
2. Remove the upper package.
3. Lift up the display from the
packaging cushion, a shown in the
image below.
Warning
• This display is heavy, so two
people are required to lift up the
display.
• Do not press on the panel to avoid
any accidental damage.
2 Package contents
*DP
Power *HDMI
2
0
2
0
©
T
O
P
V
i
c
t
o
r
y
I
n
v
e
s
t
m
e
n
t
L
t
d
.
A
l
l
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
U
n
a
u
t
h
o
r
i
z
e
d
d
u
p
l
i
c
a
t
i
o
n
i
s
a
v
i
o
l
a
t
i
o
n
o
f
a
p
p
l
i
c
a
b
l
e
l
a
w
s
.
M
a
d
e
a
n
d
p
r
i
n
t
e
d
i
n
C
h
i
n
a
.
V
e
r
s
i
o
n
This product has been manufactured by and is sold
under the responsibility of Top Victory Investments Ltd.,
and Top Victory Investments Ltd. is the warrantor in
relation to this product. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips
N.V. and are used under license.
Contents:
Drivers
User’s Manual
User’s Manual
www.philips.com/welcome
使用产品前请阅读使用说明
保留备用
Monitor
*USB A-B *Remote Control
Batteries AAA R03 1.5V
Momentum
558M1
*
CD
Register your product and get support at
www.philips.com/welcome
Quick
Start
OK
VOL
OK
VOL
*Different according to region
*Battery:Zinc carbon AAA R03 1.5V
3 Prevent Tipping
When using the display, fasten the LCD
to a wall using a cord or chain that
can support the weight of the monitor
in order to prevent the monitor from
falling.
Cord or chain
M6 Screw
Clamp
Release the screws then
fix the clamp.
6
2. Setting up the display
4 Connecting to your PC
1
Fast Charger
USB hub
1
2
USB A-B
2 3 4 5 6 7 8 9 10 11
12
AC IN
1. AC power input
2. HDMI-1 input
3. HDMI-2 input
4. HDMI-3 input
5. Displayport input
6. Earphone output
7. USB UP
8. USB downstream/USB fast charger
9. USB downstream
10. USB downstream/USB fast charger
11. USB downstream
12. Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back
of the display firmly.
2. Turn off your computer and unplug
its power cable.
3. Connect the display signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your display into a
nearby outlet.
5. Turn on your computer and display.
If the display displays an image,
installation is complete.
5 USB hub
To comply with International energy
standards, the USB hub/ports of this
display are disabled during Standby
and Off modes.
Connected USB devices will not work in
this state.
To permanently put the USB function
in “ON” state, please go to OSD Menu,
then select “USB standby mode”, and
switch it to “ON” state.
7
2. Setting up the display
6 USB charging
This display has USB ports capable
of standard power output including
some with USB Charging function
(identifiable with power icon ). You
can use these ports to charge your
Smart phone or power your external
HDD, for example. The display must be
powered ON at all times to be able to
use this function.
Some select Philips displays may not
Power or Charge your device when
it enters to “Sleep/Standby” mode
(Red power LED blinking). In that case,
please enter to OSD Menu and select
“USB Standby Mode”, then, turn the
function to “ON” mode (default=OFF).
This will then keep the USB power and
charging functions active even when
the monitor is in sleep/standby mode.
Note
If you Turn OFF your monitor via the
power switch at any given time, all the
USB ports will power OFF.
Warning
USB 2.4Ghz wireless devices, such
as, wireless mouse, keyboard, and
headphones, maybe have interference
by USB3.2 or higher version, the high-
speed signal devices, which may result
in a decreased efficiency of the radio
transmission. Should this happen,
please try the following methods to
help reduce the effects of interference.
• Try to keep USB2.0 receivers away
from USB3.2 or higher version of
connection port.
• Use a standard USB extension cable
or USB hub to increase the space
between your wireless receiver
and the USB3.2 or higher version of
connection port.
8
2. Setting up the display
7 The remote control is powered by
two 1.5V AAA batteries.
To install or replace batteries:
1. Press and then slide the cover to
open it.
2. Align the batteries according to the
(+) and (–) indications inside the
battery compartment.
3. Replace the cover.
Note
The incorrect use of batteries can result
in leaks or bursting. Be sure to follow
these instructions:
• Place “AAA” batteries matching the
(+) and (–) signs on each battery to
the (+) and (–) signs of the battery
compartment.
• Do not mix battery types.
• Do not combine new batteries with
used ones. It causes shorter life or
leakage of batteries.
• Remove the dead batteries
immediately to prevent them
from liquid leaking in the battery
compartment. Don’t touch exposed
battery acid, as it can damage your
skin.
• If you do not intend to use the
remote control for a long period,
remove the batteries.
2.2 Operating the display
1 Description of the control buttons
Press to switch power on.
Press more than 3 seconds
to switch power off.
Access the OSD menu
.
Confirm the OSD
adjustment.
Change the Audio Mode.
Adjust the OSD menu.
Change the signal input
source.
Adjust the OSD menu.
SmartImage Game menu.
There are multiple
selections: FPS, Racing, RTS,
Gamer 1, Gamer 2, LowBlue
Mode, SmartUniformity, and
Off.
When the monitor receives
HDR signal, SmartImage will
show HDR menu. There are
multiple selections: HDR
Game, HDR Movie, HDR
Photo, DisplayHDR 1000,
Personal, and Off.
Return to previous OSD
level.
9
2. Setting up the display
2 Description of the remote control
buttons
OK
VOL
1
6
7
10
5
3
11
13
12
9
8
4
2
14
1Press to switch power on
and off.
2Mute
3
Access the OSD menu.
4
Change the signal input
source.
5
Adjust the OSD menu/ Turn
up the values.
6
Adjust the OSD menu /
Return to previous OSD
level.
7
Confirm the OSD
adjustment.
8
Access the OSD menu.
Confirm the OSD
adjustment.
9
Adjust the OSD menu / Turn
down the values.
10
Access Audio Mode menu.
11
SmartImage Game menu.
There are multiple
selections: FPS, Racing, RTS,
Gamer 1, Gamer 2, LowBlue
Mode, SmartUniformity,
and Off.
When the monitor receives
HDR signal, SmartImage will
show HDR menu. There are
multiple selections: HDR
Game, HDR Movie, HDR
Photo, DisplayHDR 1000,
Personal, and Off.
12 Return to previous OSD
level
13 Adjust brightness value
14
VOL
Adjust volume.
10
2. Setting up the display
3 EasyLink (CEC)
What is it?
HDMI is a single cable to carry both
picture and audio signals from your
devices to your monitor, saving you from
cable clutter. It carries uncompressed
signals, ensuring that you have the
highest quality from source to screen.
HDMI-connected monitors with Philips
EasyLink (CEC) allow you to control
functions of multiple connected
devices with one remote control. Enjoy
high quality picture and sound without
clutter or fuss.
How to enable EasyLink (CEC)
1. Connect an HDMI-CEC compliant
device through HDMI.
2. Configure the HDMI-CEC compliant
device properly.
3. Switch on EasyLink(CEC) of this
display by toggling to the right to
enter OSD.
4. Select [Setup] > [CEC].
5. Select [On], and then confirm the
selection.
6. Now, you can turn on or off both
your device and this display using
the same remote control.
Note
1. The EasyLink-compliant device
must be switched on and selected
as the source.
2. Philips does not guarantee 100%
interoperability with all HDMI CEC
devices.
4 Description of the On Screen Display
What is On-Screen Display (OSD)?
On-Screen Display (OSD) is a feature in
all Philips LCD displays. It allows an end
user to adjust screen performance or
select functions of the displays directly
through an on-screen instruction
window. A user friendly on screen
display interface is shown as below:
Basic and simple instruction on the
control keys
To access the OSD menu on this Philips
display simply use the single toggle
button on the backside of the display.
The single button operates like a
joystick. To move the cursor, simply
toggle the button in four directions.
Press the button to select desired
option.
11
2. Setting up the display
The OSD Menu
Below is an overall view of the structure
of the On-Screen Display. You can use
this as a reference when you want to
work your way around the different
adjustments later on.
Main menu Sub menu
Picture
OSD Settings
Setup
Language
Color
Ambiglow
Game Setting
Audio
PIP/PBP
LowBlue
Mode
Input
SmartSize
Horizontal
Vertical
Transparency
OSD Time Out
Color Temperature
sRGB
User Dene
PIP Position
PIP/PBP Mode
Swap
PIP/PBP Input
PIP Size
0~100
0~100
O, 1, 2, 3, 4
5, 10, 20, 30, 60
Native,5000K,6500K,7500K,8200K,9300K,11500K
Red: 0~100
Green: 0~100
Blue: 0~100
Top-Right, Top-Left, Bottom-Right, Bottom-Left
1 HDMI 2.0, 2 HDMI 2.0, 3 HDMI 2.0, DisplayPort
Small, Middle, Large
O, PIP, PBP
O
On 1,2,3,4
Size (1,2,3,4,5,6,7)
Brightness (0~100)
Contrast(0~100)
On, O
H. position
V. position
Panel Size
1:1
Aspect
17'' (5:4), 19'' (5:4), 19''W (16:10), 22''W (16:10), 18.5''W (16:9),
19.5''W (16:9), 20''W (16:9), 21.5''W (16:9), 23''W (16:9),
24''W (16:9), 27'W (16:9), 55"W(16:9)
Follow Video, Auto, Single Color , O
Top/Left/Right, Left/Right
Bright, Brighter, Brightest
White, Red,Rose,Magenta,Violet,Blue,Azure,Cyan,
Aquamarine, Green,Chartreuse,Yellow,Orange
English, Deutsch, Español, Ελληνική, Français, Italiano, Maryar, Nederlands,
Português, Português do Brasil, Polski , Русский, Svenska, Suomi, Türkçe,
Čeština, Українська, 简体中文, 繁體中文,日本語,한국어
Ambiglow
Single Color
Position
Brightness
Crosshair
Low Input Lag
SmartResponse
SmartFrame
1 HDMI 2.0
2 HDMI 2.0
3 HDMI 2.0
DisplayPort
SmartImage
SmartImage HDR
Brightness
Contrast
Sharpness
Saturation
SmartContrast
Gamma
Over Scan
Volume
Mute
Audio Source
Audio Mode
EQ
Monitor Placement
(0~60)
(On, O)
HDMI1,HDMI2,HDMI3,DisplayPort
Sport & Racing/ RPG and Adventure/ Shooting and Action/
Movie Watching/ Music/ Personal
100Hz, 300Hz, 1KHz, 3KHz, 10KHz
Stand, Wall
Resolution Notication
USB Standby Mode
CEC
Reset
Information
(On, O)
(On, O)
(On, O)
(On, O)
(Yes, No)
FPS/Racing/RTS/Gamer 1/Gamer2/LowBlue Mode/
SmartUniformity/O
HDR Game/ HDR Movie/ HDR Photo/ DisplayHDR 1000/
Personal / O
(0~100)
(0~100)
(0~100)
(0~100)
(On, O)
(1.8, 2.0, 2.2, 2.4, 2.6)
(On, O)
On, O
On, O
O, Fast , Faster, Fastest
5 Resolution notification
This display is designed for optimal
performance at its native resolution,
3840 x 2160. When the display is
powered on at a different resolution, an
alert is displayed on screen: Use
3840 x 2160 for best results.
Display of the native resolution alert
can be switched off from Setup in the
OSD (On Screen Display) menu.
6 Physical Function
Tilt
10°
-5°
7 Ideal setting position for optimal
acoustic performance
For optimal acoustic performance
when table-mounting the monitor,
please ensure the screen is not tilted
and the speaker enclosure is facing
front, parallel with the table.
12
2. Setting up the display
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
display base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the display face down on a
smooth surface. Pay attention not
to scratch or damage the screen.
Use a screwdriver to lift up the
hinge cover.
2. Loosen the assembly screws, then
detach the stand from the display.
3. Recover the hinge cover.
Note
This monitor accepts a 200mm x
200mm VESA-Compliant mounting
interface. VESA Mounting Screw M6.
Always contact manufacturer for wall-
mount installation.
13
2. Setting up the display
>35mm
Tips on Placement
• Position the display where light
does not shine directly on the
screen.
• Dim lighting conditions in the room
for best Ambiglow effect.
• For optimal acoustic performance
when wall-mounting the monitor,
please ensure the speaker enclosure
is a minimum of 35mm from the
wall.
Caution
Wall mounting the display requires
special skills and should only be
performed by qualified personnel.
The display wall mounting should
meet safety standards according to the
display’s weight.
Also read the safety precautions before
positioning the display.
Philips bears no responsibility for
improper mounting or any mounting
that results in accident or injury.
14
2. Setting up the display
2.4 MultiView
1 What is it?
Multiview enables active variety
connect and view so that you can
work with multiple devices like PC and
Notebook side-by-side simultaneously,
making complex multi-tasking work a
breeze.
2 Why do I need it?
With the ultra high resolution Philips
MultiView display, you can experience
a world of connectivity in a comfortable
way in the office or at home. With this
display, you can conveniently enjoy
multiple content sources at one screen.
For example: You may want to keep
an eye on the live news video feed
with audio in the small window, while
working on your latest blog, or you may
want to edit an Excel file from your
Ultrabook, while logged into secured
company intranet to access files from a
desktop.
3 How to enable MultiView by OSD
menu?
1. Toggle to the right to enter OSD
Menu Screen.
2. Toggle to the up or down to select
main menu [PIP / PBP], then toggle
to the right to confirm.
3. Toggle to the up or down to select
[PIP / PBP Mode], then toggle to the
right.
4. Toggle to the up or down to select
[PIP], [PBP], then toggle to the right
to confirm your selection.
5. Now you can move backward to set
the [PIP/PBP Input], [PIP size], [PIP
Position] or [Swap].
6. Toggle to the right to confirm your
selection.
4 MultiView in OSD menu
• PIP / PBP Mode: There are 3 modes
for MultiView: [Off], [PIP], [PBP].
[PIP]: Picture in Picture
Open up a sub-window
side-by-side of other
signal source.
B
A (main)
When the sub source is
not detected:
B
A (main)
15
2. Setting up the display
[PBP]: Picture by Picture
Open up a sub-window
side-by-side of other
signal sources. BA (main)
When the sub source is
not detected. A (main)
Note
The black strip shows on the top and
the bottom of the screen for the correct
aspect ratio when in the PBP mode. If
you expect to see full screen side by
side, adjust your devices resolutions as
pop up attention resolution, you will
able to see 2 devices source screen
project to this display side by side
without black strips. Note the analog
signal is not support this full screen in
PBP mode.
• PIP Size: When PIP is activated,
there are three sub-window sizes to
choose: [Small], [Middle], [Large].
B
A (main)
Small
Middle
Large
• PIP Position: When PIP is activated,
there are four sub-window
positions to choose.
Top-Right Bottom-Right
B
A (main) A (main)
B
Top-Left Bottom-Left
B
A (main) A (main)
B
• Swap: The main picture source and
the sub picture source swapped on
the display.
Swap A and B source in [PIP] mode:
B
A (main) ↔ B (main)
A
Swap A and B source in [PBP] mode:
BA (main) ↔ AB (main)
• Off: Stop MultiView function.
Note
When you do the SWAP function, the
video and its audio source will swap at
the same time.
16
3. Ambiglow
3. Ambiglow
Ambiglow
1 What is it?
Ambiglow adds a new dimension to
your viewing experience. The innovative
Ambiglow processor continuously
adjusts the overall color and brightness
of the light to match the on screen
image. User options like Auto mode,
3 step brightness settings allow to
adjust the ambiance to your liking and
available wall surface. Whether you
are playing games, or watching movies,
Philips Ambiglow offers you a unique
and immersive viewing experience.
2 How does it work?
It is recommended that you dim the
lighting conditions in your room for
maximum effect. Ensure that Ambiglow
is set to “on” mode. Start a movie, or
play a game from your computer. The
monitor will react with appropriate
colors creating a halo effect, overall
matching the image on the screen. You
can also manually select Bright, Brighter,
Brightest mode or ambiglow function
off mode depending on your preference
which helps reduce eye fatigue under
prolonged usage.
3 How to enable Ambiglow
Ambiglow function can be selected
through OSD menu by pressing right
button to choose and pressing right
button again to confirm the selection:
1. Press right button.
2. Select [Ambiglow].
3. To switch Ambiglow off, or choose
Ambiglow, select [Follow Video],
[Auto] or [Single Color].
17
4. Image Optimization
4. Image Optimization
4.1 SmartImage
1 What is it?
SmartImage provides presets that
optimize display for different types
of content, dynamically adjusting
brightness, contrast, color and
sharpness in real time. Whether
you're working with text applications,
displaying images or watching a video,
Philips SmartImage delivers great
optimized display performance.
2 Why do I need it?
You want a display that delivers
optimized display all your favorite
types of content, SmartImage software
dynamically adjust brightness,
contrast, color and sharpness in real
time to enhance your display viewing
experience.
3 How does it work?
SmartImage is an exclusive, leading
edge Philips technology that analyzes
the content displayed on your screen.
Based on a scenario you select,
SmartImage dynamically enhances the
contrast, color saturation and sharpness
of images to enhance the contents
being displayed - all in real time with
the press of a single button.
4 How to enable SmartImage?
1. Toggle to the left to launch the
SamrtImage on screen display.
2. Toggle to the up or down to select
between the smartImage modes.
3. The SmartImage on screen display
will remain on screen for 5 seconds
or you can also toggle to the right to
make confirmation.
There are 8 modes to select: FPS,
Racing, RTS, Gamer 1, Gamer 2, LowBlue
Mode, SmartUniformity and Off.
• FPS: For playing FPS (First Person
Shooters) games. Improves dark
theme black level details.
• Racing: For playing Racing games.
Provides fastest response time and
high color saturation.
• RTS: For playing RTS (Real Time
Strategy) games, a user-selected
portion can be highlighted for RTS
games (through SmartFrame). The
picture quality can be adjusted for
the highlighted portion.
• Gamer 1: User’s preference settings
saved as Gamer 1.
• Gamer 2: User’s preference settings
saved as Gamer 2.
• LowBlue Mode: LowBlue Mode
for easy on-the-eyes productivity
Studies have shown that just as
18
4. Image Optimization
ultra-violet rays can cause eye
damage, shortwave length blue
light rays from LED displays can
cause eye damage and affect
vision over time. Developed for
wellbeing, Philips LowBlue Mode
setting uses a smart software
technology to reduce harmful
shortwave blue light.
• SmartUniformity: Fluctuations
in brightness on different parts
of a screen are a common
phenomenon among LCD displays.
Typical uniformity is measured
around 75-80%. By enabling
Philips SmartUniformity feature,
display uniformity is increased to
above 95%. This produces more
consistent and true images.
• Off: No optimization by
SmartImage.
When this display receives HDR signal
from the connected device, select a
picture mode that best fits your needs.
There are 6 modes to select: HDR
Game, HDR Movie, HDR Photo,
DisplayHDR 1000, Personal, and Off.
• HDR Game: Ideal setting to
optimize for playing video games.
With brighter white and darker
black, the gaming scene is vivid and
revealing more details, easily spot
enemies hiding in the dark corner
and shadows.
• HDR Movie: Ideal setting for
watching HDR movie. Deliver better
contrast and brightness for more
realistic and immerse viewing
experience.
• HDR Photo: Enhancing red, green,
and blue for true-to-life visuals.
• DisplayHDR 1000: Meet VESA
DisplayHDR 1000 standard
• Personal: Customize available
settings in picture menu.
• Off: No optimization by
SmartImage HDR.
Note
To switch off HDR function, please
disable from Input device and its
content.
Inconsistent HDR settings between
input device and monitor may cause
unsatisfying images.
19
4. Image Optimization
4.2 SmartContrast
1 What is it?
Unique technology that dynamically
analyzes displayed content and
automatically optimizes a display's
contrast ratio for maximum visual clarity
and viewing enjoyment, stepping up
backlighting for clearer, crisper and
brighter images or dimming backlighting
for clear display of images on dark
backgrounds.
2 Why do I need it?
You want the very best visual clarity
and viewing comfort for every type of
content. SmartContrast dynamically
controls contrast and adjusts
backlighting for clear, crisp, bright
gaming and video images or displays
clear, readable text for office work.
By reducing your display's power
consumption, you save on energy costs
and extend the lifetime of your display.
3 How does it work?
When you activate SmartContrast, it will
analyse the content you are displaying
in real time to adjust colors and control
backlight intensity. This function will
dynamically enhance contrast for a
great entertainment experience when
viewing videos or playing games.
20
4. Image Optimization
4.3 HDR Settings in Windows 10
system
Steps
1. Right click on the desktop, enter to
display settings.
2. Select the display/monitor.
3. Adjust resolution to 3840 x 2160.
4. Turn the “HDR and WCG” to on
mode.
5. Adjust Brightness for SDR content.
Note
Windows 10 edition is required, always
upgrade to the most updated version.
Below linkage is for the further more
information from mircrosoft official
website.
https://support.microsoft.com/en-
au/help/4040263/windows-10-hdr-
advanced-color-settings
STEP 1
STEP 2
STEP 4
STEP 3
STEP 5
Note
To switch off HDR function, please
disable from Input device and its
content.
Inconsistent HDR settings between
input device and monitor may cause
unsatisfying images.
21
4. Image Optimization
4.4 Adaptive Sync
Adaptive Sync
PC gaming has long been an imperfect
experience because GPUs and monitors
update at different rates. Sometimes
a GPU can render many new pictures
during a single update of the monitor,
and the monitor will show pieces of
each picture as a single image. This is
called “tearing.” Gamers can fix tearing
with a feature called “v-sync,” but the
image can become jerky as the GPU
waits on the monitor to call for an
update before delivering new pictures.
The responsiveness of mouse input and
overall frames per second are reduced
with v-sync, too. AMD Adaptive Sync
technology eliminates all of these
problems by letting the GPU update the
monitor the moment a new picture is
ready, leaving gamers with unbelievably
smooth, responsive, tearing-free games.
Followed by the graphic card that are
compatible.
■Operating system
• Windows 10/8.1/8/7
■Graphic Card: R9 290/300 Series &
R7 260 Series
• AMD Radeon R9 300 Series
• AMD Radeon R9 Fury X
• AMD Radeon R9 360
• AMD Radeon R7 360
• AMD Radeon R9 295X2
• AMD Radeon R9 290X
• AMD Radeon R9 290
• AMD Radeon R9 285
• AMD Radeon R7 260X
• AMD Radeon R7 260
■Processor A-Series Desktop and
Mobility APUs
• AMD A10-7890K
• AMD A10-7870K
• AMD A10-7850K
• AMD A10-7800
• AMD A10-7700K
• AMD A8-7670K
• AMD A8-7650K
• AMD A8-7600
• AMD A6-7400K
22
5. Sound by Bowers & Wilkins
5. Sound by
Bowers & Wilkins
The new Philips Momentum display
boasts sound by legendary audio
experts Bowers & Wilkins. Its speaker
system, created exclusively for Philips
by Bowers & Wilkins, delivers a thrilling
performance with incredible dynamic
range. Bass is rich and full while details
are pristine, even at low volume. Take
your sensory experience and immersion
one level deeper by selecting audio
modes to optimize your sound for both
gaming and entertainment.
• Volume: Adjust the volume level.
• Mute: Mute the sound or restore it.
• Audio source: Select audio source
from connected devices. (HDMI 1/
HDMI 2/HDMI 3/DisplayPort)
• Audio mode: Select one of the
six sound modes to best suit
your gaming, viewing or listening
experience.
- Sport & Racing: Create a realistic,
being-there experience when
enjoying sports or racing games.
- RPG and Adventure: Immerse
yourself in spacious and
atmospheric sound.
- Shooting and Action: Experience
punchy, impactful sound for
maximum excitement and
realism.
- Movie Watching: Enhance movie
soundtracks for an immersive,
cinematic listening experience.
- Music: True Sound by
Bowers & Wilkins, delivering
the performance as the artist
intended.
- Personal: Access the EQ menu to
adjust the sound to your specific
requirements.
• EQ: Adjust equalizer level for audio.
• Monitor placement: Select ‘Stand’
or ‘Wall’ to have the best sound
reproduction according to the
setting.
23
6. Technical Specifications
6. Technical Specifications
Picture/Display
Display Panel Type VA
Backlight W-LED
Panel Size 55" (139.7 cm)
Pixel Pitch 0.315 (H) mm x 0.315 (V) mm
Aspect Ratio 16:9
Contrast ratio (typ.) 4,000:1
Optimum Resolution 3840x2160 @ 60Hz (HDMI)
3840x2160 @ 120Hz (DP)
Viewing Angle 178° (H) / 178° (V) @ C/R > 10
Picture Enhancement SmartImage Game / SmartImage HDR
Display Colors 1.07G
Vertical Refresh Rate 40-60Hz (HDMI)
48-120Hz (DP)
Horizontal Frequency 30-160KHz (HDMI)
30-270KHz (DP)
sRGB YES
Color Gamut YES
SmartUniformity YES
Delta E YES
LowBlue Mode YES
HDR VESA Certified DisplayHDR™ 1000
Adaptive Sync YES
Flicker-free YES
Ambiglow Yes (3-sides Ambiglow)
Connectivity
Signal Input HDMI 2.0x3, DisplayPort1.4x1
USB USB-Bx1 (upstream), USB3.2x4 (including 2 charging)
Input Signal Separate Sync
Audio Out Headphone
Convenience
Speaker 2.1 channel speaker ( Middle High 10Wx2, Woofer
20Wx1 )
MultiView PIP/PBP mode (2 x devices)
OSD Languages
English, German, Spanish, Greek, French, Italian,
Hungarian, Dutch, Portuguese, Brazil Portuguese,
Polish, Russian, Swedish, Finnish, Turkish, Czech,
Ukranian, Simplified Chinese, Traditional Chinese,
Japanese, Korean
Other Convenience VESA mount(200x200 mm), Kensington Lock
Plug & Play Compatibility DDC/CI, sRGB, Windows 10/8.1/8/7, Mac OSX
24
6. Technical Specifications
Power
Consumption
AC Input
Voltage at
100VAC , 50Hz
AC Input
Voltage at
115VAC , 60Hz
AC Input
Voltage at
230VAC, 50Hz
Normal Operation 123.08 W (typ.) 122.96 W (typ.) 123.77 W (typ.)
Sleep (Standby mode) <0.5 W (typ.) <0.5 W (typ.) <0.5 W (typ.)
Off mode <0.3 W (typ.) <0.3 W (typ.) <0.3 W (typ.)
Heat Dissipation*
AC Input
Voltage at
100VAC , 50Hz
AC Input
Voltage at
115VAC , 60Hz
AC Input
Voltage at
230VAC , 50Hz
Normal Operation 420.07 BTU/hr
(typ.)
419.66 BTU/hr
(typ.)
422.42 BTU/hr
(typ.)
Sleep (Standby mode) <1.71 BTU/hr
(typ.)
<1.71 BTU/hr
(typ.)
<1.71 BTU/hr
(typ.)
Off mode <1.02 BTU/hr
(typ.)
<1.02 BTU/hr
(typ.)
<1.02 BTU/hr
(typ.)
Power LED indicator
On mode: LED light turns off
Standby/Sleep mode: Red light (blinking)
Power off: Red light
Power Supply Built-in, 100-240VAC, 50-60Hz
Dimensions
Product with stand
(WxHxD) 1232 x 834 x 308 mm
Product without stand
(WxHxD) 1232 x 715 x 102 mm
Product with packaging
(WxHxD) 1390 x 990 x 376 mm
Weight
Product with stand 26.50 kg
Product without stand 22.70 kg
Product with packaging 34.31 kg
Operating Condition
Temperature range
(operation) 0°C to 40 °C
Relative humidity
(operation) 20% to 80%
Atmospheric pressure
(operation) 700 to 1060hPa
Temperature range
(Non-operation) -20°C to 60°C
Relative humidity
(Non-operation) 10% to 90%
Atmospheric pressure
(Non-operation) 500 to 1060hPa
25
6. Technical Specifications
Environmental
ROHS YES
Packaging 100% recyclable
Specific Substances 100% PVC BFR free housing
Cabinet
Color Black
Finish Glossy and texture
Note
1. This data is subject to change without notice. Go to www.philips.com/support to
download the latest version of leaflet.
2. SmartUniformity and Delta E information sheets are included in the box.
26
6. Technical Specifications
6.1 Resolution & Preset Modes
1 Maximum Resolution
3840 x 2160 @ 60 Hz (HDMI)
3840 x 2160 @ 120 Hz (DP)
2 Recommended Resolution
3840 x 2160 @ 60 Hz (HDMI)
3840 x 2160 @ 120 Hz (DP)
H. freq
(kHz)
Resolution V. freq (Hz)
31.47 720 x 400 70.09
31.47 640 x 480 59.94
35.00 640 x 480 66.67
37.86 640 x 480 72.81
37.50 640 x 480 75.00
37.88 800 x 600 60.32
46.88 800 x 600 75.00
48.36 1024 x 768 60.00
60.02 1024 x 768 75.03
44.77 1280x 720 59.86
63.89 1280 x 1024 60.02
79.98 1280 x 1024 75.03
55.94 1440 x 900 59.89
70.64 1440 x 900 74.98
65.29 1680 x 1050 59.95
67.50 1920 x 1080 60.00
67.50 3840 x 2160 30.00
135.00 3840 x 2160 60.00
183.00 2560 x 1440 120.00
133.29 1920×2160
PBP mode
59.99
137.26 1920 x 1080
(DP)
120.00
266.66 3840 x 2160
(DP)
120.00
3 Video Timing
Resolution V. freq (Hz)
640 x 480p 60Hz 4:3
720x 480p 60Hz 4:3
720 x 480p 60Hz 16:9
1280x 720p 60Hz
1920x 1080i 60Hz
1920x 1080p 60Hz
720 x 576p 50Hz 4:3
720 x 576p 50Hz 16:9
1280x 720p 50Hz
1920 x 1080i 50Hz
1920 x 1080p 50Hz
3840 x 2160P 50Hz
3840 x 2160P 60Hz
Note
1. Please notice that your display
works best at native resolution
of 3840 x 2160. For best display
quality, please follow this resolution
recommendation.
2. If you feel the texts in your display
is a little fade away, you can adjust
your fonts setting in your PC/
Notebook as following steps.
Step 1: Control panel/All Control Panel
Items/Fonts
28
7. Power Management
7. Power Management
If you have VESA DPM compliance
display card or software installed in
your PC, the display can automatically
reduce its power consumption when
not in use. If an input from a keyboard,
mouse or other input device is detected,
the display will 'wake up' automatically.
The following table shows the power
consumption and signaling of this
automatic power saving feature:
Power Management Definition
VESA
Mode Video H-sync V-sync Power Used LED
Color
Active ON Yes Yes 122.96 W (typ.)
428 W (max.) Off
Sleep
(Standby
mode)
OFF No No 0.5 W (typ.) Red
(blink)
The following setup is used to measure
power consumption on this display.
• Native resolution: 3840 x 2160
• Contrast: 50%
• Brightness: 70%
• Color temperature: 6500k with full
white pattern
Note
This data is subject to change without
notice.
29
8. Customer care and warranty
8. Customer care and
warranty
8.1 Philips’ Flat Panel Displays
Pixel Defect Policy
Philips strives to deliver the highest
quality products. We use some
of the industry's most advanced
manufacturing processes and practice
stringent quality control. However,
pixel or sub pixel defects on the TFT
display panels used in flat panel
displays are sometimes unavoidable.
No manufacturer can guarantee that
all panels will be free from pixel
defects, but Philips guarantees that
any display with an unacceptable
number of defects will be repaired
or replaced under warranty. This
notice explains the different types of
pixel defects and defines acceptable
defect levels for each type. In order to
qualify for repair or replacement under
warranty, the number of pixel defects
on a TFT display panel must exceed
these acceptable levels. For example,
no more than 0.0004% of the sub
pixels on a display may be defective.
Furthermore, Philips sets even higher
quality standards for certain types or
combinations of pixel defects that are
more noticeable than others. This policy
is valid worldwide.
subpixel
pixel
Pixels and Sub pixels
A pixel, or picture element, is composed
of three sub pixels in the primary colors
of red, green and blue. Many pixels
together form an image. When all sub
pixels of a pixel are lit, the three colored
sub pixels together appear as a single
white pixel. When all are dark, the three
colored sub pixels together appear as a
single black pixel. Other combinations of
lit and dark sub pixels appear as single
pixels of other colors.
Types of Pixel Defects
Pixel and sub pixel defects appear on
the screen in different ways. There are
two categories of pixel defects and
several types of sub pixel defects within
each category.
Bright Dot Defects
Bright dot defects appear as pixels or
sub pixels that are always lit or 'on'. That
is, a bright dot is a sub-pixel that stands
out on the screen when the display
displays a dark pattern. There are the
types of bright dot defects.
One lit red, green or blue sub pixel.
Two adjacent lit sub pixels:
- Red + Blue = Purple
30
8. Customer care and warranty
- Red + Green = Yellow
- Green + Blue = Cyan (Light Blue)
Three adjacent lit sub pixels (one white
pixel).
Note
A red or blue bright dot must be
more than 50 percent brighter than
neighboring dots while a green
bright dot is 30 percent brighter than
neighboring dots.
Black Dot Defects
Black dot defects appear as pixels or
sub pixels that are always dark or 'off'.
That is, a dark dot is a sub-pixel that
stands out on the screen when the
display displays a light pattern. These
are the types of black dot defects.
Proximity of Pixel Defects
Because pixel and sub pixels defects
of the same type that are near to one
another may be more noticeable,
Philips also specifies tolerances for the
proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or
replacement due to pixel defects during
the warranty period, a TFT display panel
in a Philips flat panel display must have
pixel or sub pixel defects exceeding the
tolerances listed in the following tables.
31
8. Customer care and warranty
BRIGHT DOT DEFECTS ACCEPTABLE LEVEL
1 lit subpixel 2
2 adjacent lit subpixels 0
3 adjacent lit subpixels (one white pixel) 0
Total bright dot defects of all types 2
BLACK DOT DEFECTS ACCEPTABLE LEVEL
1 dark subpixel 10 or fewer
2 adjacent dark subpixels 2 or fewer
3 adjacent dark subpixels 1 or fewer
Distance between two black dot defects* >=5mm
Total black dot defects of all types 10 or fewer
TOTAL DOT DEFECTS ACCEPTABLE LEVEL
Total bright or black dot defects of all types 10 or fewer
Note
1 or 2 adjacent sub pixel defects = 1 dot defect
32
8. Customer care and warranty
8.2 Customer Care & Warranty
For warranty coverage information and additional support requirements valid for your
region, please visit www.philips.com/support website for details or contact your local
Philips Customer Care Center.
For Warranty Period please refer to Warranty Statement in Important Information
Manual.
For extended warranty, if you would like to extend your general warranty period, an
Out of Warranty service package is offered via our Certified Service Center.
If you wish to make use of this service, please be sure to purchase the service within
30 calendar days of your original purchase date. During the extended warranty
period, the service includes pickup, repair and return service, however the user will
be responsible for all costs accrued.
If the Certified Service Partner cannot perform the required repairs under the offered
extended warranty package, we will find alternative solutions for you, if possible, up
to the extended warranty period you have purchased.
Please contact our Philips Customer Service Representative or local contact center (by
Consumer care number) for more details.
Philips Customer Care Center number listed below.
• Local Standard
Warranty Period
• Extended Warranty
Period
• Total Warranty Period
• Depend on
different Regions
• + 1 Year • Local Standard warranty period
+1
• + 2 Years • Local Standard warranty period
+2
• + 3 Years • Local Standard warranty period
+3
**Proof of original purchase and extended warranty purchase required.
Note
Please refer to important information manual for regional service hotline, which is
available on the Philips website support page.
33
9. Troubleshooting & FAQs
9. Troubleshooting &
FAQs
9.1 Troubleshooting
This page deals with problems that can
be corrected by a user. If the problem
still persists after you have tried these
solutions, contact Philips customer
service representative.
1 Common Problems
No Picture (Power LED not lit)
• Make sure the power cord is
plugged into the power outlet and
into the back of the display.
• First, ensure that the power button
on the rear side of the display is in
the OFF position, then press it to
the ON position.
No Picture (Power LED is Red)
• Make sure the computer is turned
on.
• Make sure the signal cable is
properly connected to your
computer.
• Make sure the display cable has no
bent pins on the connect side. If
yes, repair or replace the cable.
• The Energy Saving feature may be
activated
Screen says
• Make sure the display cable
is properly connected to your
computer. (Also refer to the Quick
Start Guide).
• Check to see if the display cable has
bent pins.
• Make sure the computer is turned
on.
AUTO button doesn't function
• The auto function is applicable only
in VGA-Analog mode. If the result is
not satisfactory, you can do manual
adjustments via the OSD menu.
Note
The Auto Function is not applicable in
DVI-Digital mode as it is not necessary.
Visible signs of smoke or sparks
• Do not perform any troubleshooting
steps
• Disconnect the display from mains
power source immediately for safety
• Contact with Philips customer
service representative immediately.
2 Imaging Problems
Image is not centered
• Adjust the image position using
the “Auto” function in OSD Main
Controls.
• Adjust the image position using
the Phase/Clock of Setup in OSD
Main Controls. It is valid only in VGA
mode.
Image vibrates on the screen
• Check that the signal cable is
properly securely connected to the
graphics board or PC.
Vertical flicker appears
• Adjust the image using the “Auto”
function in OSD Main Controls.
• Eliminate the vertical bars using
the Phase/Clock of Setup in OSD
Main Controls. It is valid only in VGA
mode.
34
9. Troubleshooting & FAQs
Horizontal flicker appears
• Adjust the image using the “Auto”
function in OSD Main Controls.
• Eliminate the vertical bars using
the Phase/Clock of Setup in OSD
Main Controls. It is valid only in VGA
mode.
Image appears blurred, indistinct or too
dark
• Adjust the contrast and brightness
on On-Screen Display.
An "after-image", "burn-in" or "ghost
image" remains after the power has
been turned off.
• Uninterrupted display of still or
static images over an extended
period may cause "burn-in", also
known as "after-imaging " or "ghost
imaging", on your screen. "Burn-in",
"after-imaging", or "ghost imaging"
is a well-known phenomenon in
LCD panel technology. In most
cases, the "burn-in" or "after-
imaging" or "ghost imaging" will
disappear gradually over a period
of time after the power has been
switched off.
• Always activate a moving screen
saver program when you leave your
display unattended.
• Always activate a periodic screen
refresh application if your LCD
display will display unchanging
static content.
• Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or
“after-imaging” or “ghost image”
symptoms that will not disappear
and cannot be repaired. The
damage mentioned above is not
covered under your warranty.
Image appears distorted. Text is fuzzy
or blurred.
• Set the PC’s display resolution
to the same mode as display’s
recommended screen native
resolution.
Green, red, blue, dark, and white dots
appears on the screen
• The remaining dots are normal
characteristic of the liquid crystal
used in today’s technology, Please
refer the pixel policy for more detail.
35
9. Troubleshooting & FAQs
9.2 General FAQs
Q1: When I install my display what
should I do if the screen shows
'Cannot display this video
mode'?
Ans.: Recommended resolution for
this display: 3840 x 2160.
• Unplug all cables, then connect
your PC to the display that you
used previously.
• In the Windows Start Menu, select
Settings/Control Panel. In the
Control Panel Window, select the
display icon. Inside the display
Control Panel, select the 'Settings'
tab. Under the setting tab, in box
labelled 'desktop area', move the
sidebar to 3840 x 2160 pixels.
• Open 'Advanced Properties' and
set the Refresh Rate to 60 Hz, then
click OK.
• Restart your computer and repeat
step 2 and 3 to verify that your PC
is set at 3840 x 2160 @ 60 Hz.
• Shut down your computer,
disconnect your old display and
reconnect your Philips LCD display.
• Turn on your display and then turn
on your PC.
Q2: What are the .inf and .icm files
on the CD-ROM? How do I
install the drivers (.inf and
.icm)?
Ans.: These are the driver files
for your monitor. Follow
the instructions in your user
manual to install the drivers.
Your computer may ask you for
monitor drivers (.inf and .icm
files) or a driver disk when you
first install your monitor. Follow
the instructions to insert the (
companion CD-ROM) included
in this package. Monitor drivers
(.inf and .icm files) will be
installed automatically.
Q3: How do I adjust the resolution?
Ans.: Your video card/graphic driver
and display together determine
the available resolutions. You
can select the desired resolution
under Windows® Control Panel
with the "Display properties".
Q4: What if I get lost when I am
making display adjustments via
OSD?
Ans.: Simply press the button, then
select 'Reset' to recall all of the
original factory settings.
Q5: Is the LCD screen resistant to
scratches?
Ans.: In general it is recommended
that the panel surface is not
subjected to excessive shocks
and is protected from sharp or
blunt objects. When handling the
display, make sure that there is
no pressure or force applied to
the panel surface side. This may
affect your warranty conditions.
Q6: How should I clean the LCD
surface?
Ans.: For normal cleaning, use a clean,
soft cloth. For extensive cleaning,
please use isopropyl alcohol. Do
not use other solvents such as
ethyl alcohol, ethanol, acetone,
hexane, etc.
Q7: Can I change the color setting of
my display?
Ans.: Yes, you can change your color
setting through OSD control as
the following procedures,
• Press " " to show the OSD (On
Screen display) menu
36
9. Troubleshooting & FAQs
• Press " " to select the option
"Color" then press " " to enter
color setting, there are three settings
as below.
1. Color Temperature: The 7
settings are Native, 5000K,
6500K, 7500K, 8200K, 9300K
and 11500K. With settings in
the 5000K range the panel
appears "warm, with a red-
white color tone", while a 11500K
temperature yields "cool,
bluewhite toning".
2. sRGB: This is a standard setting
for ensuring correct exchange of
colors between different device
(e.g. digital cameras, displays,
printers, scanners, etc).
3. User Define: The user can choose
his/her preference color setting
by adjusting red, green blue
color.
Note
A measurement of the color of light
radiated by an object while it is being
heated. This measurement is expressed
in terms of absolute scale, (degrees
Kelvin). Lower Kevin temperatures such
as 2004K are red; higher temperatures
such as 9300K are blue. Neutral
temperature is white, at 6504K.
Q8: Can I connect my LCD display to
any PC, workstation or Mac?
Ans.: Yes. All Philips LCD displays are
fully compatible with standard
PCs, Macs and workstations.
You may need a cable adapter
to connect the display to your
Mac system. Please contact your
Philips sales representative for
more information.
Q9: Are Philips LCD displays Plug-
and- Play?
Ans.: Yes, the displays are Plug-and-
Play compatible with Windows
10/8.1/8/7.
Q10: What is Image Sticking, or Image
Burn-in, or After Image, or Ghost
Image in LCD panels?
Ans.: Uninterrupted display of still or
static images over an extended
period may cause "burn-in",
also known as "after-imaging" or
"ghost imaging", on your screen.
"Burn-in", "after-imaging", or
"ghost imaging" is a well-known
phenomenon in LCD panel
technology. In most cases, the
"burn-in" or "atter-imaging" or
"ghost imaging" will disappear
gradually over a period of
time after the power has been
switched off.
Always activate a moving screen
saver program when you leave
your display unattended.
Always activate a periodic screen
refresh application if your LCD
display will display unchanging
static content.
Warning
Failure to activate a screen saver, or
a periodic screen refresh application
may result in severe “burn-in” or “after-
imaging” or “ghost image” symptoms
that will not disappear and cannot be
repaired. The damage mentioned above
is not covered under your warranty.
Q11: Why is my display not showing
sharp text, and is displaying
jagged characters?
Ans.: Your LCD display works best at its
native resolution of 3840 x 2160.
For best display, please use this
resolution.
37
9. Troubleshooting & FAQs
Q12: How to unlock/lock my hot key?
Ans.: Please press for 10 seconds
to unlock/lock the hot key, by
doing so, your display pops out
“Attention” to show the unlock/
lock status as shown below
illustrators.
Q13: Why the fonts are indisctinct?
Ans.: please follow the process on
page 26 to improve it.
Q14: Where can I find Important
Information manual mentioned
in EDFU?
Ans.: Important Information manual
can be download on the Philips
website support page.
9.3 Multiview FAQs
Q1: Can I enlarge the PIP sub
window?
Ans.: Yes, there are 3 sizes to select:
[Small], [Middle], [Large]. You
can press to enter OSD menu.
Select your preferred [PIP Size]
option from the [PIP / PBP] main
menu.
Q2: How to listen to Audio,
independent of video?
Ans.: Normally the audio source is
linked to the main picture source.
If you want to change audio-
source input , you can press
to enter OSD menu. Select your
preferred [Audio Source] option
from the [Audio] main menu.
Please note that the next time
you turn on your display, the
display will by default select
the audio source you chose last
time. In case you want to change
it again, you need to go through
the above steps to select your
new preferred audio source,
which then will become the
“default” mode.
Q3: Why the sub-windows flickers
when I enable PIP/PBP.
Ans: It’s because the sub-windows
video source is interlace timing
(i-timing), please change sub-
window signal source to be
progressive timing (3P-timing).
2020 © TOP Victory Investments Ltd. All rights reserved.
This product has been manufactured by and is sold under
the responsibility of Top Victory Investments Ltd., and Top
Victory Investments Ltd. is the warrantor in relation to this
product. Philips and the Philips Shield Emblem are registered
trademarks of Koninklijke Philips N.V. and are used under
license.
Specications are subject to change without notice.
Version: 558M1CE1T