Philips AC4076/80 User Manual
Displayed below is the user manual for AC4076/80 by Philips which is a product in the Air Purifiers category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
Always there to help you
Question?
Contact
Philips
EN User Manual 2 ZH-TW 使用手冊 20
AC4076
清潔濾網 更換濾網
清潔濾網 更換濾網
1
4ENGLISH
Introduction
Congratulations on your purchase and welcome to Philips! To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome.
With this air purier with advanced highly effective German ltration
technology, you breathe cleaner air in your home. For the best result, place
the air purier in a room where you spend most of your time, e.g. your
bedroom, living room, or children’s room.
There are many pollution sources. In a home, there can be high
condensation of formaldehyde and other harmful gases coming from
furniture, paints and smoking, and .etc. Because these harmful pollutants
can be invisible and odorless, they can affect your health. The Philips air
purier lters off these harmful gases quickly and effectively. Furthermore,
it can also lter out pollutants such as pollens pm2.5 and bacteria, airborne
particles that can affect your well-being. With our air purier, it improves
the air quality and ensures you and your family members breathe cleaner
air at your home.
Filtration in a professional and credible way
The air purier has all-in-one formaldehyde removal lter that ensures the
best air quality in your home:
- Stage 1: The pre-lter has been treated with antibacterial substances. It
catches big particles like human hair, pet hair .etc.
- Stage 2: The formaldehyde removal lter effectively removes
formaldehyde, odors, pm2.5, pollen, bacteria, and other volatile organic
compounds (VOCs).
General description (Fig. 1)
A Air quality light ring
B Fan speed indicator
C Air quality sensor outlet
D Air quality sensor
E Air quality sensor inlet
F Handle
G Air outlet
H Air inlet
I Cord storage facility
J Mains cord
K Control panel
1 Light sensor for night mode
2 AIR QUALITY on/off button with light
3 Power on/off button
4 SILENT button with light
5 Power-on button with light
6 FAN SPEED button with light
7 AUTO button with light
8 Fan speed lights (1, 2, 3 and boost power)/lter replacement lights
9 FAN SPEED indications
10 REPLACE FILTER indications
5English
L Filter 2: Formaldehyde removal lter AC4147
M Filter 1: pre-lter
N Front panel
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
- Do not let water or any other liquid or ammable detergent enter the
appliance to avoid electric shock and/or a re hazard.
- Do not clean the appliance with water or any other liquid or a
(ammable) detergent to avoid electric shock and/or a re hazard.
Warning
- Check if the voltage indicated on the bottom of the appliance
corresponds to the local mains voltage before you connect the
appliance.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
- Do not use the appliance if the plug, the mains cord or the appliance
itself is damaged.
- This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and maintenance shall not be made by children
without supervision.
- Do not block the air inlet and outlet, e.g. by placing items on the air
outlet or in front of the air inlet.
Caution
- This appliance is not a substitute for proper ventilation, regular vacuum
cleaning or use of an extractor hood or fan while cooking.
- If the wall socket used to power the appliance has poor connections,
the plug of the appliance becomes hot. Make sure you plug the
appliance into a properly connected wall socket.
- Always place and use the appliance on a dry, stable, level and horizontal
surface.
- Leave at least 20cm free space behind and on both sides of the
appliance and leave at least 30cm free space above the appliance.
- Do not place anything on top of the appliance and do not sit on the
appliance.
- Do not place the appliance directly below an air conditioner to prevent
condensation from dripping onto the appliance.
- Make sure all lters are properly installed before you switch on the
appliance.
6English
- Only use the original Philips lters specially intended for this appliance.
Do not use any other lters.
- Avoid knocking against the appliance (the air inlet and outlet in
particular) with hard objects.
- Always lift or move the appliance by the handle at the back of the
appliance.
- Do not insert your ngers or objects into the air outlet.
- Do not use this appliance when you have used indoor smoke-type
insect repellents or in places with oily residues, burning incense or
chemical fumes.
- Do not use the appliance near gas appliances, heating devices or
replaces.
- Always unplug the appliance after use and before you clean it.
- Do not use the appliance in a room with major temperature changes,
as this may cause condensation inside the appliance.
- The appliance is only intended for household use under normal
operating conditions.
- Do not use the appliance in wet surroundings or in surroundings with
high ambient temperatures, such as the bathroom, toilet or kitchen.
- The appliance does not remove carbon monoxide (CO) or radon
(Rn). It cannot be used as a safety device in case of accidents with
combustion processes and hazardous chemicals.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic elds.
Before rst use
Placing the lters
The appliance comes with all lters tted inside, but you have to remove
the packaging of the lters before you can use the appliance. Remove all
lters, unpack them and place them back into the appliance as described
below.
Tip: Place the appliance against a wall for more stability when you remove or
insert lters.
Note: Make sure you insert the lters in the correct position.
1 Place your ngers in the recesses of the side panels and gently pull
the top part of the front panel towards you. Then lift the hooks at the
bottom of the panel out of the bottom of the appliance.
7English
2 Take out the new lter from the packaging material.
3 Put lter 2 (Formaldehyde removal lter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
4 Place lter 1 (pre-lter) in the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
Note: Make sure that all hooks are properly attached to the appliance.
5 To reattach the front panel, insert the bottom hooks into the bottom
of the appliance rst (1). Then push the panel against the body of the
appliance (2).
Using the appliance
1 Put the plug in the wall socket
All lights go on twice and you hear a beep. Then the lights go out again.
2 Press the on/off button to switch on the appliance.
1
2
8English
The power-on light, the AUTO light, and the AIR QUALITY light on the
control panel go on.
The air quality light ring shows the quality of the air.
Air quality indication
Colour Air quality
Blue Very good
Deep purple Good
Purple Fair
Red Bad
To switch off the air quality light ring, press the AIR QUALITY button.
Note: The air quality light ring automatically goes on when the appliance is
switched on.
The appliance automatically starts operating in the AUTO mode.
To switch off the appliance, press the on/off button again and unplug the
appliance.
Note: When the humidity level in the room is very high, it is possible that
condensation develops on the air quality sensor. As a result, the AIR QUALITY
light on the control panel and the air quality light ring may indicate that the
air quality is bad even though the air quality is good. In this case, the auto
mode causes the appliance to run at high fan speed. You can solve this by
cleaning the air quality sensor. If condensation develops frequently during
periods of high humidity, we advise you to use one of the manual speed
settings.
Fan speed lights/lter replacement lights
- The lights on the right-hand side of the control panel have a dual
function: they either indicate the fan speed or they indicate that the
lters should be replaced or cleaned.
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
9English
- When lights 1 to 2 light up continuously, they indicate the current fan
speed.
- When light 1 ashes, you have to clean the pre-lter. When lights 2
ashes, you have to replace the formaldehyde removal lter.
- When light 2 and the REPLACE FILTER light are ashing continuously,
the formaldehyde removal lter have to replace, and the appliance is
locked (see chapter ‘Filter replacement lock’ for more information).
Adjusting the air quality sensor sensitivity
People with certain health problems (e.g. allergies or asthma) have a
greater need for healthy air. For this reason, the appliance allows you to
adjust the sensitivity of the air quality sensor. If you set it to higher sensitivity
level, the appliance starts cleaning the air at lower pollution level.
There are 3 sensitivity levels:
- standard
- sensitive
- extra sensitive
The pollution sensor is set to standard sensitivity by default. You can adjust
the sensitivity of the air quality sensor in the following way:
1 If the appliance is already plugged in, unplug the appliance and wait for
a few minutes.
2 Press the AIR QUALITY button and simultaneously put the mains plug
in the wall socket.
The appliance beeps twice and one of the fan speed lights ashes to
show the current sensitivity level of the air quality sensor.
Sensitivity level:
Fan speed light Sensitivity level
Extra sensitive
Sensitive
Standard
3 Press the FAN SPEED button to adjust the sensitivity level of the air
quality sensor.
One of the fan speed lights ashes to show the set sensitivity level of
the air quality sensor.
4 Press the on/off button to switch off the appliance.
Note: When you change the sensitivity level, the appliance automatically starts
operating at the set sensitivity level whenever you switch on the appliance.
Auto mode
When the appliance is switched on, the built-in air quality sensor
automatically measures the ambient air quality. When the auto mode is
▊☴㏨ ᴪᨑ☴㏨
10 English
activated, the appliance selects the most appropriate fan speed for the
measured air quality.
1 Press the on/off button to switch on the appliance.
2 Press the AUTO button to activate the auto mode.
Note: When the appliance is operating in another mode and you want to
activate the auto mode, simply press the AUTO button.
The AUTO light goes on.
The FAN SPEED light indicates at which fan speed the appliance is
operating.
Note: When the air quality is very good and the appliance operates at a very
low fan speed, the FAN SPEED light for the lowest speed setting does not go
on. In this case only the power-on light and the AUTO light are on.
Note: The built-in air quality sensor measures the air quality and automatically
selects the appropriate speed setting to ensure the best possible air quality in
your room. When the air is clean, the appliance stops running. When the air
quality deteriorates, the appliance starts running at a low fan speed and noise
level so that the energy consumption is minimised.
Night mode
The appliance works in harmony with its surroundings. In auto mode, the
appliance automatically switches to night mode when the room in
which it is operating becomes dark. When the room has been dark for
3 minutes, the lights of the appliance go out, the fan speed and noise
level are reduced and the energy consumption is minimised. If the room
becomes bright again for 5 minutes or longer, the appliance resumes
normal operation.
In night mode, the automatic control is still active. If the air is clean, the
lights and the fan are off. If the air quality deteriorates, the appliance is
activated and the lights and the fan come on again.
Note: The night mode only works when the appliance is operating in the auto
mode.
Fan speed
If you do not use the auto mode, you can select the desired fan speed
yourself.
1 Press the on/off button to switch on the appliance.
2 Press the FAN SPEED button one or more times to select the desired
fan speed.
The corresponding fan speed light and the indications above the lights
show the set fan speed ( , , or ).
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
11English
The corresponding fan speed light in the fan speed indicator goes on.
Note: Select boost power ( ) if you need an extra strong airow when the air
in the room is very dirty. Lights to light go on.
Silent mode
When you use the appliance in silent mode, it operates very quietly.
1 Press the on/off button to switch on the appliance.
2 Press the SILENT button to activate the silent mode.
The SILENT light goes on.
If you want to go back to the FAN SPEED mode or AUTO mode, simply
press the FAN SPEED or AUTO button.
Cleaning
Always unplug the appliance before you clean it.
Never immerse the appliance in water or any other liquid.
Never use aggressive or ammable cleaning agents such as bleach or
alcohol to clean any part of the appliance.
Only the pre-lter is washable.
Body of the appliance
Regularly clean the inside and outside of the body to prevent dust from
collecting on the inside and outside.
1 Wipe away dust with a soft dry cloth from the body of the appliance.
2 Clean the air inlet and the air outlet with a soft dry cloth.
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
12 English
Pre-lter
The pre-lter is washable and vacuum cleanable.
- Clean the pre-lter when the rst lter replacement light ashes to
ensure optimal functioning of the appliance.
1 Place your ngers in the recesses of the side panels and gently pull
the top part of the front panel towards you. Then lift the hooks at the
bottom of the panel out of the bottom of the appliance.
2 To remove the pre-lter, grab the two projections and pull the lter
towards you.
3 Clean the pre-lter by removing the dust with a vacuum cleaner.
Tip: Alternatively, you can wash the pre-lter under a running tap. If the
pre-lter is very dirty, use a soft brush to brush away the dust. In this case,
make sure that the pre-lter is completely dry before putting it back into the
air purier. If it is still wet, bacteria may multiply in it and shorten the lifetime
of the pre-lter.
4 Put the pre-lter back into the appliance. Attach all hooks properly to
the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
▊☴㏨ ᴪᨑ☴㏨
13English
5 To reattach the front panel, insert the bottom hooks into the bottom
of the appliance rst (1). Then push the panel against the body of the
appliance (2).
Air quality sensor
Clean the air quality sensor every 2 months for optimal functioning of
the appliance. Clean it more frequently if you use the appliance in a dusty
environment.
Note: When the humidity level in the room is very high, it is possible that
condensation develops on the air quality sensor. As a result, the AIR QUALITY
light on the control panel and the air quality light ring may indicate that the air
quality is bad even though the air quality is good. In this case you have to clean
the air quality sensor or use one of the manual speed settings.
1 Clean the air quality sensor inlet and the air quality sensor outlet with a
soft brush.
2 Remove the air quality sensor cover.
3 Clean the air quality sensor, the dust inlet and the dust outlet with a
lightly moistened cotton swab.
4 Dry them with a dry cotton swab.
5 Reattach the air quality sensor cover.
Filter replacement
Filter maintenance
This appliance is equipped with the Healthy air protect lock to ensure that
the lters are in optimal condition when the appliance is operating.
When one of the lters is almost full and has to be cleaned or replaced,
the appropriate lter replacement light starts to ash. When you do not
replace the formaldehyde removal lter, the appliance stops operating and
the appliance is locked.
1
2
14 English
When the appliance is locked, the lter replacement light of the lter
concerned lights up on continuously.
Note: Only replace a lter when the lter replacement light ashes. If you
replace the lter before the lter replacement light starts ashing, the lifetime
counter will not be reset but will continue counting the lifetime of the previous
lter. As a result, the lter replacement light will start ashing much too soon.
Filter replacement lights
The lter replacement lights indicate which lter has to be cleaned or
replaced.
- Filter replacement light 1 ashes: lter 1 (the pre-lter) has to be
cleaned. See chapter ‘Cleaning’ for further instructions.
- Filter replacement light 2 ashes: the formaldehyde removal lter has
to be replaced.
Healthy air protect lock
If you do not replace the lter in time, the appliance stops operating
approx. 2 weeks after the lter replacement light started ashing. When the
appliance is locked, it does not operate until you have replaced with the
new lter and pressed the reset button.
Note: When lter replacement lights 2 and REPLACE FILTER on the control
panel are on continuously, the appliance is locked (see section ‘Filter
maintenance’ in this chapter for more information).
How long it takes before the appliance is locked depends on the operating
time and speed level selected after the lter replacement alert.
Approximately 1 day before the appliance locks, it beeps every 30 minutes
to inform you that one of the lters needs to be replaced.
When the appliance is locked, you hear a beep when you press any button.
You can switch off the appliance by pressing the on/off button.
If the appliance is locked:
1 Check which lter needs to be replaced (see section ‘Filter
replacement lights’).
2 Switch off the appliance and unplug it.
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
清潔濾網 更換濾網
清潔濾網 更換濾網
15English
3 Replace the appropriate lter (see section ‘Replacing the lters’).
Replacing the lters
Tip: Place the appliance against a wall for more stability when you remove or
insert lters.
1 Switch off the appliance and unplug it.
2 Place your ngers in the recesses of the side panels and gently pull
the top part of the front panel towards you. Then lift the hooks at the
bottom of the panel out of the bottom of the appliance.
3 To remove lter 1 (pre-lter), grab the two projections and pull the
lter towards you.
4 To remove lter 2 (formaldehyde removal lter), grab its tag and pull it
towards you.
5 Discard the lter that needs to be replaced and unpack the new lter.
Note: Do not touch the pleated lter surface, or smell the lter as it has
collected pollutants from the air.
Note: Wash your hands after disposing of the used lters.
6 Put lter 2 (formaldehyde removal lter) back into the appliance.
Note: Make sure that the side with the tag is pointing towards you.
7 Put lter 1 (pre-lter) back into the appliance.
Note: Make sure that the side with the two projections is pointing towards you.
Note: Make sure that all hooks are properly attached to the appliance.
16 English
8 To reattach the front panel, insert the bottom hooks into the bottom
of the appliance rst (1). Then push the panel against the body of the
appliance (2).
9 Put the plug in the wall socket and switch on the appliance again.
10 Press the lter reset button with a thin tool.
Note: You do not need to press the lter reset button after cleaning lter 1
(pre-lter).
Note: You cannot reset the appliance when you replace a lter before its lter
replacement light starts ashing.
Note: You cannot reset the appliance if it is not plugged in and switched on.
Storage
To store the mains cord, wind it round the cord storage facility at the
bottom of the appliance.
Accessories
New lters are available under the following type numbers:
Filter Type number
Filter 2: Formaldehyde removal lter AC4147
Environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the environment.
Guarantee and service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Consumer Care Centre
in your country (you nd its phone number in the worldwide guarantee
leaet). If there is no Consumer Care Centre in your country, go to your
local Philips dealer.
1
2
17English
Troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, contact the Consumer Care Centre in your country.
Problem Possible solution
Buttons are not
responding.
Replace the formaldehyde removal lter when the lter replacement light
started ashing and the appliance has sounded every 30 minutes after
approx. 2 weeks. Replace the lter and reset the appliance (see chapter
‘Filter replacement’) so that the appliance can operate again.
No air comes out of the
air outlet
• The appliance is not switched on. Put the plug in the wall
socket and switch on the appliance.
• The air quality is good and the auto mode is activated. In this case,
the appliance switches off automatically when the air is clean to save
electricity.
The fan speed does not
change when the AUTO
mode is activated.
When the room becomes dark, the night mode is activated automatically
when the appliance is in auto mode. In this case, the fan speed is set to a
very low level. If you want to change the fan speed, press the FAN SPEED
button one or more times to set the desired fan speed.
The airow that comes
out of the air outlet is
signicantly weaker than
before.
• The pre-lter is dirty. Clean the pre-lter (see chapter ‘Cleaning’).
• You haven’t removed all packaging material from the lters. Make sure
that you have removed all packaging material.
The air quality does not
improve, even though
the appliance has been
operating for a long time.
• One of the lters has not been placed in the appliance. Make sure that
all lters are properly installed in the following order, starting with the
innermost lter: 1) formaldehyde removal lter, 2) pre-lter.
• The air quality sensor is wet. The humidity level in your room is high and
causes condensation. Make sure that the air quality sensor is clean and
dry (see chapter ‘Cleaning’).
The colour of the air
quality light ring and the
air quality light always stays
the same.
• The air quality sensor is dirty. Clean the air quality sensor (see
chapter ‘Cleaning’).
• There is not enough ventilation in the room. Open a window, to
improve the air circulation.
I need cleaner air because
I have an allergy.
You can change the air quality sensor sensitivity (see chapter ‘Using the
appliance’) to make the appliance clean the air even better.
The appliance is extra
loud.
• Please check if you have removed all the packaging material from the
lters.
• If the appliance is still too loud; you can change the fan speed to a lower
fan speed level.
18 English
Problem Possible solution
The appliance still indicates
that I need to replace a
lter, but I already did.
Perhaps you did not press the lter reset button properly. Plug in the
appliance, press the on/off button and press the lter reset button with a
at tool.
The appliance stops
operating, although the
power-on light is still on.
The built in quality sensor has determined that the air quality is good and
that the air does not need to be cleaned anymore. When the air quality
deteriorates, the appliance starts running at a low fan speed and noise
level so that the energy consumption is minimised.
The appliance does not
work. Fan speed lights 1
and 2 ash, all other lights
are out.
This is a component defect. Contact the Consumer Care Centre in your
country (you nd its phone number in the worldwide guarantee leaet). If
there is no Consumer Care Centre in your country, go to your local Philips
dealer.
The appliance does not
work. The air quality
light ring ashes blue, all
other lights are out.
This is air particle sensor error or an air particle sensor and gas sensor
error. Contact the Consumer Care Centre in your country (you nd
its phone number in the worldwide guarantee leaet). If there is no
Consumer Care Centre in your country, go to your local Philips dealer.
The air quality light ring
keeps ashing purple.
This is a gas sensor error. Switch off the appliance and unplug it. Take the
appliance to your Philips dealer or an authorised Philips service centre.
清潔濾網 更換濾網
清潔濾網 更換濾網
1
21
繁體中文
簡介
恭喜您購買本產品並歡迎加入飛利浦！
請至 www.Philips.com/welcome 註冊您的產品，以獲得飛利浦提供
的完整支援。
本空氣清淨機採用德國先進的高效率過濾技術，能讓您在家中能呼
吸更潔淨的空氣。為了達到最佳效果，請將空氣清淨機放在您最長
時間出入的房間內，例如臥室、客廳或兒童房。
汙染來源所在多有。在家裡，可能有來自家具、油漆和吸煙等高濃
度甲醛和其他有害氣體。因為這些有害汙染物可能無色無味，進而
影響您的健康。飛利浦空氣清淨機能夠迅速有效地濾淨這些有害氣
體。此外，還能濾淨會影響健康的 pm2.5 花粉、細菌和空氣微粒。
這台空氣清淨機能改善空氣品質，確保您和家人在家呼吸更潔淨的
好空氣。
專業可靠的過濾方式
本空氣清淨機採用多功能的複合高效去甲醛濾網，確保您的家居環
境擁有最佳空氣品質：
- 第 1 階段：預過濾網經抗菌物質處理，可捕捉人類頭髮、寵物
毛髮等較大粒子。
- 第 2 階段：複合高效去甲醛濾網能有效去除甲醛、異味、pm2.5
、花粉、細菌和其他揮發性有機化合物 (VOC)。
一般說明 (圖 1)
A 空氣品質環狀指示燈
B 風速指示燈
C 空氣質量感測器出風口
D 空氣質量感測器
E 空氣質量感測器進風口
F 握柄
G 出風口
H 進風口
I 電源線收納裝置
J 電源線
K 控制面板
1 光線感應器 (可進入夜間模式)
2 空氣品質 (AIR QUALITY) 開/關按鈕附指示燈
3 電源開/關按鈕
4 靜音 (SILENT) 按鈕附指示燈
5 電源開啟按鈕附指示燈
6 風速 (FAN SPEED) 按鈕附指示燈
7 自動 (AUTO) 按鈕附指示燈
22 繁體中文
8 風速指示燈 (1、2、3，及超高速)/濾網更換指示燈
9 風速 (FAN SPEED) 指示
10 更換濾網 (REPLACE FILTER) 指示
L 濾網 2：複合高效去甲醛濾網 AC4147
M 濾網 1：預過濾網
N 正面護板
重要事項
在使用本產品前，請先仔細閱讀本使用手冊，並保留說明以供日後
參考。
危險
- 請勿讓水或其他液體，或是易燃清潔劑進入產品內，以避免電擊
和 / 或火災。
- 請勿用水或其他液體，或是 (易燃) 清潔劑清潔產品，以避免電
擊和 / 或火災。
警示
- 在連接本產品的電源之前，請確認本產品機體底部所標示的電壓
與當地的室內電壓是否相同。
- 如果電源線損壞，則必須交由飛利浦、飛利浦授權之服務中心，
或是具備相同資格的技師更換，以免發生危險。
- 當插頭、電線或產品本身受損時，請勿使用產品。
- 本產品可供 8 歲以上孩童、身體官能或心智能力退化者，或是
經驗與使用知識缺乏者使用，但需要有人在旁監督或適當指示如
何安全使用本產品，以及可能遭受的危險。請勿讓兒童把玩本產
品。若無人在旁監督，不得讓孩童清潔與維護本產品。
- 請勿在出風口上方或進風口前面放置物品，擋住進出風口。
注意
- 本產品不可用來作為維持良好通風的設備、替代吸塵器清潔，或
烹調時用來當作抽油煙機使用。
- 如果供應產品電力的牆上插座接頭不良，產品插頭會發熱。請確
定將產品插入接頭良好的牆上插座。
- 請將本產品放置在乾燥平穩的水平面上使用。
- 產品的背面及側面須至少保留 20 公分的間隔距離，頂部則至少
保留 30 公分的間隔距離。
- 產品頂部請勿堆放任何物品，請勿坐在產品上。
- 請勿將產品放置在冷氣機正下方，以免冷氣機滴水，造成產品發
生水滴凝結的現象。
- 請在開啟產品電源前，先確認所有濾網皆已正確安裝。
- 請僅使用產品專用的飛利浦原廠濾網。請勿使用其他濾網。
- 切勿使用堅硬的物體敲打本產品 (特別是進風口及出風口)。
- 請務必使用產品背面的握柄提起或搬動產品。
- 請勿將手指或任何物體放入出風口。
23
繁體中文
- 當您使用室內噴霧式驅蟲劑或在充滿油漬、燒香、香煙的火星或
化學煙霧的地方時，請勿使用本產品。
- 請勿在氣體用品、加熱裝置或壁爐附近使用本產品。
- 使用完畢後或進行清潔之前，請務必先拔除電源插頭。
- 請勿在溫差變化極大的室內使用本產品，因為室溫差距太大會造
成本產品內部凝結水珠。
- 本產品為家用產品，僅限於在正常操作環境下使用。
- 請勿在極為潮濕或周遭溫度很高的環境下使用本產品，例如浴
室、廁所或廚房。
- 本產品無法清除一氧化碳 (CO) 或氡氣 (Rn)。 發生燃燒意外及
危險化學物品意外時，本產品無法當作安全裝置使用。
電磁場 (EMF)
本飛利浦產品符合所有電磁場暴露的相關適用標準和法規。
第一次使用前
放置濾網
本產品所有隨附的濾網皆已妥善安裝在機體內，但是在使用前，必
須先拆下濾網包裝。請先取出所有濾網，拆下濾網包裝，然後把濾
網放回產品中，如下所述。
秘訣：取出或裝入濾網時，將本產品靠牆擺放可獲得較穩定的支撐。
備註：請確定濾網裝入正確的位置。
1 將手指放入兩邊護板的凹處，朝自己的方向輕輕拉出正面護板的
頂部。然後將護板底部的扣鉤自產品底部提起。
2 從包裝材料取出新濾網。
24 繁體中文
3 將濾網 2 (複合高效去甲醛濾網) 裝回產品。
備註：請確認有拉片的那一側朝向自己。
4 將濾網 1 (預過濾網) 裝入產品。
備註：請確認有兩個凸出部分的那一側朝向自己。
備註：請確認所有扣鉤皆已正確裝入產品。
5 若要重新裝入正面護板，先將底部扣鉤裝入產品底部 (1)。
然後將護板推入產品機體 (2)。
使用本產品
1 將電源插頭插入牆上插座
所有指示燈亮起兩次，並發出嗶聲，然後指示燈再次熄滅。
2 按下開/關按鈕，開啟產品電源。
控制面板上的電源開啟指示燈、自動 (AUTO) 指示燈與空氣品
質 (AIR QUALITY) 指示燈會亮起。
1
2
▊☴㏨ ᴪᨑ☴㏨
25
繁體中文
空氣品質環狀指示燈會顯示空氣品質。
空氣品質指示
顏色 空氣品質
藍色 非常好
深紫 很棒
紫色 普通
紅色 不良
若要關閉空氣品質環狀指示燈，請按下空氣品質 (AIR QUALITY)
按鈕。
備註：產品電源開啟後，環狀空氣品質指示燈就會自動亮起。
本產品會在自動 (AUTO) 模式下自動開始運作。
要關閉產品電源，請再次按下開/關按鈕並拔掉插頭。
備註：當室內濕度等級很高的時候，空氣質量感測器上可能會凝結
水滴。如此一來，即使空氣品質良好，控制面板上的空氣品質 (AIR
QUALITY) 指示燈及空氣品質環狀指示燈可能會顯示空氣品質不
良。在此情況下，自動模式會讓產品風扇高速運轉。您可以清潔空
氣質量感測器來解決此問題。如果高濕度期間經常發生水滴凝結問
題，建議您使用手動風速設定。
風速指示燈/濾網更換指示燈
- 控制面板右側的指示燈有雙重功能：一是指示風速，二是顯示濾
網是否應更換或清潔。
- 指示燈 1 至 2 持續亮起，表示目前風速。
- 指示燈 1 閃爍，表示必須清潔預過濾網。指示燈 2 閃爍，表示
必須更換複合高效去甲醛濾網。
- 當指示燈 2 和更換濾網 (REPLACE FILTER) 指示燈持續閃爍時，
必須更換複合高效去甲醛濾網，且產品已鎖住 (請參閱「濾網更
換鎖」單元以取得更多資訊)。
調整空氣質量感測器敏感度
具有某些健康問題 (例如過敏或氣喘) 的人更需要乾淨的空氣。
基於這個原因，本產品可讓您調整空氣質量感測器的敏感度。如果
您將敏感度的等級設為較高，產品在污染程度較低時就會開始潔淨
空氣。
▊☴㏨ ᴪᨑ☴㏨
26 繁體中文
敏感度的等級有 3 種：
- 標準
- 敏感
- 超敏感
污染感測器的設定預設為標準敏感度。空氣質量感測器的敏感度可
依照下列方式調整：
1 如果產品已經插電，請將產品的插頭拔下，等待幾分鐘。
2 按下空氣品質 (AIR QUALITY) 按鈕，同時將電源插頭插入電源
插座。
產品會發出嗶聲兩次，其中一個風速指示燈會閃爍，顯示空氣質
量感測器目前的敏感度等級。
敏感度等級：
風速指示燈 敏感度等級
超敏感
敏感
標準
3 按下風速 (FAN SPEED) 按鈕，調整空氣質量感測器的敏感度
等級。
其中一個風速指示燈會閃爍，顯示要設定的空氣質量感測器敏感
度等級。
4 按下開/關按鈕，關閉產品電源。
備註：若您變更了敏感度等級，產品在開啟電源後，會依照您設定
的敏感度等級，自動開始運作。
自動模式
產品電源開啟後，內建的空氣質量感測器會自動檢測周遭環境的空
氣品質。啟動自動模式後，產品會根據所檢測到的空氣品質，選擇
最適當的風速。
1 按下開/關按鈕，開啟產品電源。
2 按下自動 (AUTO) 按鈕，啟動自動模式。
備註：若產品以另一種模式運作，但您想要啟動自動模式時，只要
按下自動 (AUTO) 按鈕即可。
自動 (AUTO) 指示燈會亮起。
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
27
繁體中文
風速 (FAN SPEED) 指示燈會顯示產品是以何種風速運作。
備註：當空氣品質非常良好時，產品會以非常低的風速運作，顯示
最低風速設定的風速 (FAN SPEED) 指示燈不會亮起。在此情況下，
只有電源開啟指示燈與自動 (AUTO) 指示燈會亮起。
備註：內建空氣質量感測器會檢測空氣品質並自動選擇適當的速度
設定，以盡可能確保最佳的室內空氣品質。當空氣乾淨時，產品會
停止運作。當空氣品質降低時，產品會以低風速和低噪音等級開始
運作，將能源消耗降至最低。
夜間模式
本產品能因應周遭環境協調運作。在自動模式下，產品所處的室內
光線變暗時，會自動切換到夜間模式。室內光線變暗長達 3 分鐘，
產品的指示燈就會熄滅，風速和噪音等級會降低，耗電量也會降至
最低。如果室內光線再度變亮長達 5 分鐘以上，本產品會恢復正常
運作。
在夜間模式下，自動控制功能仍然啟動。如果空氣很乾淨，指示燈
及風扇就會關閉。如果空氣品質降低，產品就會啟動，而指示燈及
風扇會再度開啟。
備註：產品只有在自動模式下運作時，才會啟動夜間模式。
風速
如果不使用自動模式，可選擇所需的風速。
1 按下開/關按鈕，開啟產品電源。
2 按下風速 (FAN SPEED) 按鈕一次或多次，選擇所需的風速。
相對應的風速指示燈與指示燈上方的指示，會顯示設定的風速
(、、 或 )。
風速指示中相對應的風速指示燈會亮起。
備註：如果室內空氣很髒，需要超強風速時，請選擇超高速
()。指示燈 至 指示燈會亮起。
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
28 繁體中文
靜音模式
本產品處於靜音模式時，會十分安靜地運作。
1 按下開/關按鈕，開啟產品電源。
2 按下靜音 (SILENT) 按鈕，啟動靜音模式。
靜音 (SILENT) 指示燈會亮起。
如果想要返回風速 (FAN SPEED) 模式或自動 (AUTO) 模式，只要按
下風速 (FAN SPEED) 按鈕或自動 (AUTO) 按鈕即可。
清潔
進行清潔前，請務必先拔離電源插頭。
切勿讓產品浸入水或其他液體中。
切勿使用漂白劑或酒精等刺激性或易燃洗劑清潔產品的任何部分。
只有預過濾網可水洗。
產品機體
定期清理機體內部與外殼，可避免內部與外殼累積灰塵。
1 請使用柔軟的乾布擦拭產品的機體。
2 請使用柔軟的乾布清潔進風口及出風口。
預過濾網
預過濾網可水洗並可用吸塵器清潔。
- 第一個濾網更換指示燈閃爍時，請清洗預過濾網，確保產品發揮
最佳效果。
1 將手指放入兩邊護板的凹處，朝自己的方向輕輕拉出正面護板的
頂部。然後將護板底部的扣鉤自產品底部提起。
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
29
繁體中文
2 若要取出預過濾網，抓住濾網上兩個凸出部分，朝向自己拉出。
3 使用吸塵器去除灰塵來清潔預過濾網。
秘訣：也可以將預過濾網置於水龍頭下清洗。如果預過濾網很髒，
請使用軟刷來清除灰塵。在這種情況下，請先確認預過濾網已完全
乾燥，再裝回空氣清淨機。如果預過濾網未乾，細菌可能會在其中
滋生，造成其使用壽命縮短。
4 將預過濾網裝回產品中。將所有扣鉤正確扣入產品。
備註：請確認有兩個凸出部分的那一側朝向自己。
5 若要重新裝入正面護板，先將底部扣鉤裝入產品底部 (1)。
然後將護板推入產品機體 (2)。
1
2
30 繁體中文
空氣質量感測器
每 2 個月清理空氣質量感測器，可確保產品發揮最佳效果。如果在
佈滿灰塵的環境中使用產品，就要更常進行清潔。
備註：當室內濕度等級很高的時候，空氣質量感測器上可能會凝結
水滴。如此一來，即使空氣品質良好，控制面板上的空氣品質 (AIR
QUALITY) 指示燈及空氣品質環狀指示燈可能會顯示空氣品質不
良。在此情況下，您必須清潔空氣質量感測器，或使用手動風速設
定。
1 請使用軟刷來清潔空氣質量感測器的進風口及出風口。
2 取下空氣質量感測器的護蓋。
3 請使用略濕的棉棒，清潔空氣質量感測器、進風口和
出風口。
4 使用乾的棉棒擦乾。
5 重新裝入空氣質量感測器的護蓋。
更換濾網
保養濾網
本產品配備健康空氣保護鎖功能，可確保濾網在產品運作時處於最
佳狀態。當其中一個濾網阻塞而必須清潔或更換時，對應的濾網更
換指示燈會開始閃爍。若不更換複合高效去甲醛濾網，產品會停止
運作，然後鎖定。
產品鎖定後，對應濾網的濾網更換指示燈會持續亮起。
備註：僅在濾網更換指示燈閃爍時才更換濾網。若在濾網更換指示
燈開始閃爍之前就更換濾網，使用壽命計時器不會重設，而會持
續計算原濾網的使用壽命。結果會造成濾網更換指示燈太早開始閃
爍。
31
繁體中文
濾網更換指示燈
濾網更換指示燈會顯示哪一個濾網必須清潔或更換。
- 濾網更換指示燈 1 閃爍：濾網 1 (預過濾網) 必須清潔。如需進
一步說明，請參閱「清潔」單元。
- 濾網更換指示燈 2 閃爍：複合高效去甲醛濾網必須更換。
健康空氣智能鎖
如果不即時更換濾網，本產品會在濾網更換指示燈開始閃爍約 2 週
後停止運作。產品鎖定後，必須更換新濾網，並按下重設按鈕才能
恢復運作。
備註：當濾網更換指示燈 2 以及控制面版上的更換濾網 (REPLACE
FILTER) 指示燈持續亮起時，產品已鎖住 (請參閱此單元中的「保養
濾網」一節，以取得更多資訊)。
產品會在多久時間後鎖住，則根據濾網更換警示燈亮起後的運作時
間與所選的速度等級而定。
本產品進入鎖定狀態的前 1 天，每隔 30 分鐘會發出嗶聲，提示有
濾網需要更換。
本產品鎖住後，按下任一按鈕，都會聽見嗶聲。您可以按下開/關按
鈕以關閉產品電源。
如果產品已鎖住：
1 檢查哪個濾網需要更換 (請參閱「濾網更換指示燈」一節)。
2 關閉產品電源，並拔除插頭。
3 更換對應的濾網 (請參閱「更換濾網」一節)。
▊☴㏨ ᴪᨑ☴㏨
▊☴㏨ ᴪᨑ☴㏨
清潔濾網 更換濾網
清潔濾網 更換濾網
32 繁體中文
更換濾網
秘訣：取出或裝入濾網時，將本產品靠牆擺放可獲得較穩定的
支撐。
1 關閉產品電源，並拔除插頭。
2 將手指放入兩邊護板的凹處，朝自己的方向輕輕拉出正面護板的
頂部。然後將護板底部的扣鉤自產品底部提起。
3 若要取出濾網 1 (即預過濾網)，抓住濾網上兩個凸出部分，朝向
自己拉出。
4 若要取出濾網 2 (複合高效去甲醛濾網)，抓住濾網拉片，朝向自
己拉出。
5 丟棄已用的濾網，拆開新濾網的包裝。
備註：請勿碰觸有皺摺的濾網表面或嗅聞濾網，因為它收集了空氣
中的污染物。
備註：丟棄舊濾網後務必洗手。
6 將濾網 2 (複合高效去甲醛濾網) 裝回產品。
備註：請確認有拉片的那一側朝向自己。
7 將濾網 1 (預過濾網) 裝回產品。
備註：請確認有兩個凸出部分的那一側朝向自己。
備註：請確認所有扣鉤皆已正確裝入產品。
33
繁體中文
8 若要重新裝入正面護板，先將底部扣鉤裝入產品底部 (1)。然後
將護板推入產品機體 (2)。
9 請將插頭插入牆上插座，然後再度開啟產品電源。
10 利用細長的工具，按下濾網重設按鈕。
備註：清潔濾網 1 (預過濾網) 之後，不需按下濾網重設按鈕。
備註：若在濾網更換指示燈開始閃爍之前即更換濾網，就無法重設
本產品。
備註：如果未插插頭或未開啟電源，您便無法重設本產品。
收納
請將電源線纏繞在產品底部的電源線收納裝置上，加以收納。
配件
我們提供下列型號的新濾網：
濾網 型號
濾網 2：
複合高效去甲醛濾網 AC4147
環境保護
- 本產品使用壽命結束時， 請勿與一般家庭廢棄物一併丟棄。請
將該產品送至政府指定的回收點進行回收。此舉能為環保盡一份
心力。
保固與服務
若您需要相關資訊，或是有任何問題，請造訪飛利浦網站：
www.philips.com，或連絡您所在國家/地區的飛利浦客戶服務中心
(您可在全球保證書上找到電話號碼)。若當地沒有客戶服務中心，請
洽詢當地的飛利浦經銷商。
1
2
34 繁體中文
疑難排解
本單元概述您使用本產品時最常遇到的問題。如果您無法利用以下
資訊解決您遇到的問題，請聯絡您所在國家/地區的客戶服務中心。
問題 可能的解決方法
按鈕沒有回應。 當濾網更換指示燈開始閃爍，且在約 2 週後產品開始每隔 30 分鐘發
出嗶聲時，更換複合高效去甲醛濾網 。更換濾網並重設本產品 (請參
閱「更換濾網」單元)，才可再度運作。
出風口沒有空氣流出 • 您的產品沒有開啟電源。將插頭插入牆上插座，然後開啟產品
電源。
• 空氣品質良好，且自動模式啟動。在此情況下，產品會在空氣乾淨
時自動關閉電源，以節省電力。
自動模式啟動時，
風速沒有改變。
室內光線變暗時，若產品處於自動模式，夜間模式會自動啟動。在
此情況下，風速會設得很低。如果想要更改風速，請按下風速 (FAN
SPEED) 按鈕一次或多次，設定所需的風速。
出風口流出的風速比
之前慢很多。
• 預過濾網髒污。清潔預過濾網 (請參閱「清潔」單元)。
• 您尚未拆下濾網的所有包裝材料。請確認已拆下所有包裝材料。
即使本產品已經長時間
運作，空氣品質仍未獲得
改善。
• 其中一個濾網尚未裝入產品中。請確認所有濾網都已按照下列順序
正確安裝，濾網從內至外分別為：(1) 複合高效去甲醛濾網；(2) 預
過濾網。
• 空氣質量感測器潮濕。室內的濕度等級很高，造成水珠凝結。請確
認空氣質量感測器乾淨且乾燥 (請參閱「清潔」單元)。
空氣品質環狀指示燈及空
氣品質指示燈的顏色一直
維持不變。
• 空氣質量感測器髒污。清潔空氣質量感測器 (請參閱「清潔」單元)
• 室內空氣不夠流通。請開窗，促進空氣對流。
我會過敏，需要更乾淨的
空氣。
您可以變更空氣質量感測器敏感度 (請參閱「使用本產品」單元)，
讓本產品把空氣清潔得更加徹底。
產品噪音很大。 • 請檢查是否已拆下濾網的所有包裝材料。
• 如果產品噪音仍然很大，可將風速變更為較低的速度等級。
產品不斷要求更換濾網，
但濾網已經更換了。
您可能未確實按下濾網重設按鈕。請為本產品插上電源，按下開/關
按鈕，然後用扁平工具按下濾網重設按鈕。
產品停止運作，而電源指
示燈仍亮起。
內建空氣質量感測器判定空氣品質良好，因此不再需要清潔空氣。當
空氣品質降低時，產品會以低風速和低噪音等級開始運作，將能源消
耗降至最低。
本產品無法運作。風速指
示燈 1 和 2 閃爍，其他
所有指示燈均熄滅。
此為元件故障。請聯絡您所在國家/地區的客戶服務中心 (您可在全球
保證書上找到電話號碼)。若當地沒有客戶服務中心，請洽詢當地的
飛利浦經銷商。
35
繁體中文
問題 可能的解決方法
本產品無法運作。空氣品
質環狀指示燈閃爍藍光，
其他所有指示燈均熄滅。
此為空氣微粒感測器錯誤或空氣微粒感測器與空氣感測器錯誤。請聯
絡您所在國家/地區的客戶服務中心 (您可在全球保證書上找到電話號
碼)。若當地沒有客戶服務中心，請洽詢當地的飛利浦經銷商。
空氣品質環狀指示燈持續
閃爍紫光。
此為空氣感測器錯誤。關閉產品電源，並拔除插頭。將本產品送到飛
利浦經銷商或飛利浦授權之服務中心。
Specifications are subject to change without notice
© 2014 Koninklijke Philips N.V.
All rights reserved.
4241 210 17351