Table of Contents
Philips AW9000/10 User Manual
Displayed below is the user manual for AW9000/10 by Philips which is a product in the Loudspeakers category. This manual has pages.
Related Manuals
www.philips.com/support
User manual
Always there to help you
Register your product and get support at
AW9000
Question?
Contact
Philips
1
English
EN
Contents
1 Important 2
Safety 2
Notice 3
2 Your Wireless Hi-Fi Speaker 4
Introduction 4
What's in the box 4
What else you need 4
Overview of the main unit 5
3 Prepare 6
Download Philips AirStudio+ Lite to
your smartphone or tablets 6
Connect speaker cables 7
Connect power and switch on 8
4 Connect AW9000 to your home
Wi-Fi network 9
Option 1: Set up wireless connection
to a non-WPS router through an
iOS device 9
Option 2: Set up through a non-WPS
Wi-Fi router and Android device 12
Option 3: Set up wireless connection
to a WPS router 14
Option 4: Set up wired connection
through an Ethernet cable 15
5 Play 17
Listen to Internet radio stations
through AW9000 17
Play from an external device 19
6 Upgradermware 21
7 Product information 22
Specications 22
8 Troubleshooting 23
9 Appendix: Understand meanings
of LED colors 25
2EN
1 Important
Safety
Information for Europe:
Know these safety symbols
The 'exclamation mark' calls attention to
features for which you should carefully read the
supplied literature to prevent operating and
maintenance problems.
The 'lightening bolt' symbol indicates
uninsulated components within the product
that can cause an electric shock.
Toreducetheriskofreorelectricshock,do
not expose the product to rain or moisture and
donotplaceanyobjectslledwithliquids,such
asvases,ontheproduct.
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this product near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not remove the casing of this product.
i Do not expose the product to dripping /
splashing water, rain or high humidity.
j Keep this product away from direct
sunlight,nakedamesorheat.
k Do not install near any heat sources
such as radiators, heat registers, stoves,
or other electrical equipment (including
ampliers).
l Do not place any other electrical
equipment on the product.
m Do not place any sources of danger
on the product (e.g. objects containing
liquids,burningcandles).
n Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
• Never remove the casing of this apparatus.
• Never lubricate any part of this apparatus.
• Never place this apparatus on other electrical
equipment.
• Keepthisapparatusawayfromdirectsunlight,naked
amesorheat.
• Ensure that you always have easy access to the power
cord,plugoradaptortodisconnectthisapparatusfrom
the power.
Risk of overheating! Never install this apparatus
inaconnedspace.Alwaysleaveaspaceof
at least four inches around this apparatus for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on this
apparatus.
3
English
EN
Notice
This product complies with the radio
interferencerequirementsoftheEuropean
Community.
Thisproductcomplieswiththerequirementof
the 1999/5/EC directive.
Modications
Modicationsnotauthorizedbythe
manufacturer may void user's authority to
operate this product.
Your product is designed and manufactured
withhighqualitymaterialsandcomponents,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negativeconsequencesfortheenvironmentand
human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separateintothreematerials:cardboard(box),
polystyrene foam (buffer) and polyethylene
(bags,protectivefoamsheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
aspecializedcompany.Pleaseobservethe
local regulations regarding the disposal of
packagingmaterials,exhaustedbatteriesandold
equipment.
Android is a trademark of Google Inc. Use of
this trademark is subject to Google permissions.
Class II equipment symbol:
CLASSIIapparatuswithdoubleinsulation,and
no protective earth provided.
Note
• The type plate is located on the bottom of the
apparatus.
4EN
2 Your Wireless
Hi-Fi Speaker
Congratulationsonyourpurchase,and
welcometoPhilips!Tofullybenetfromthe
supportthatPhilipsoffers,registeryourproduct
at www.philips.com/welcome.
IfyoucontactPhilips,youwillbeaskedforthe
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Introduction
WiththiswirelessHi-Fispeakersystem,youcan:
• Listen to music sent from a DLNA /
UPnP compatible APP.
• listen to Internet radio stations or
online music services.
• play music from other audio devices
through the MP3-LINK,OPTICAL,
COAXIAL or AUXIN(L/R) sockets.
What's in the box
Check and identify the contents of your
package:
• Wireless Hi-Fi speaker system with
built-in Wi-Fi
• 2 x AC power cords
• 1 x speaker cable
• Quick start guide
• Safety sheet
What else you need
TostreamaudiowirelesslytoAW9000,you
need:
• acertiedWi-Firouter
• aniOSorAndroiddevice,suchasan
iPod touch/iPhone/iPad; or an Android
phone or tablet
• the Philips AirStudio+ Lite app
available on Apple App Store (for iOS
devices) or Google Play Store (for
Android devices)
Your AW9000 should be connected to the
same local network as your iOS/Android device
or through the Wi-Fi router.
5
English
EN
Overview of the main unit
a +/-
• Adjust volume.
b Numerickeys(1to5)
• Select an Internet radio station.
c AUX 1 button
• Select an auxiliary input source
connected to the OPTICAL or
COAXIAL socket.
d AUX 2 button
• Select an auxiliary input source
connected to the AUX IN L/R sockets.
e MP3-LINK button
• Select the MP3 link source.
f Power indicator/button
• Show the current status of the device.
• Switch the device on or to normal/Eco
standby mode.
g AUX IN L/R sockets
• Connect an external audio device
through RCA audio cables (red/white;
not supplied).
a
b
c
d
e
f
g
h
i
j
k
l
m
n
h MP3-LINK socket
• Connect an external audio player
through a 3.5mm audio cable (not
supplied).
i WI-FI SETUP button
• Connect the device to a Wi-Fi
network.
j ETHERNET socket
• (Optional) Connect to a wireless
router through an Ethernet cable (not
supplied).
k AC IN ~ socket
• Connect the power cord.
l OPTICAL socket
• Connect an external device through an
optical cable (not supplied).
m COAXIAL socket
• Connect an external audio device
through an coaxial cable (not supplied).
n Speaker connectors
• Connect the two speakers with each
other through the supplied speaker
cables.
6EN
3 Prepare
Always follow the instructions in this chapter
in sequence.
Download Philips AirStudio+
Lite to your smartphone or
tablets
1 (For iPod touch/iPhone/iPad users) Install
Philips AirStudio+ Lite from Apple App
Store,andthenruntheapp.
(For users of Android smartphones or tablets)
Install Philips AirStudio+ Lite from Google Play
Store and then run the app.
2 Flick right to view the introduction pages
and then go to the initial Setuppage,or
tap Skip intro to enter the initial Setup
page directly.
7
English
EN
3 On the initial Setuppage,tapSetup a new
speaker.
4 Readthegeneralsetupsteps,thentap
Next.
Connect speaker cables
Note
• Insert the stripped portion of each speaker wire into
the socket completely.
• Foroptimalsound,usethesuppliedspeakersonly.
1 Unscrew the speaker connectors.
2 Insert fully the end of a speaker cable with
red mark into the left red (+) connector.
3 Screw the left red (+) connector to secure
the cable.
4 Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
5 Screw the left black (-) connector to
secure the cable.
6 Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
21 3
8EN
Connect power and switch
on
Caution
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the device.
• Risk of electric shock! When you unplug the AC power
cord,alwayspulltheplugfromthesocket.Neverpull
the cord.
• BeforeyouconnecttheACpowercord,makesurethat
you have completed all the other connections.
1 Read the power connection instructions
on the app.
2 Connect the AC power cord to
• the AC IN ~ socket on the back of the
main speaker.
• the wall power socket.
» The device switches on automatically.
» The power/status indicator blinks
amber during boot-up.
» Afterawhile,forrst-timesetup,the
power/status indicator turns solid
amber.
3 Tap Next on the app screen to continue.
Switch between normal and Eco power
standby mode
• To switch the device to normal standby
mode,brieypressthepowerbutton/
indicator above .
» The power/status indicator turns green.
• To switch the device to Eco power standby
mode,pressandholdthepowerbutton/
indicator above for less than 3 seconds
and then release the button.
» The power/status indicator turns
amber for a short while and then turns
off.
• To switch the device on from normal or
Ecopowerstandbymode,brieypressthe
power button/indicator above again.
Operation LED status
On ->
Normal
standby
Brieypressthe
power button/indi-
cator above .
Amber/white
-> Green
On/Normal
standby ->
Eco power
standby
Press and hold the
power button/indi-
cator above for
less than 3 seconds
and then release
the button.
Amber/white
or green ->
Off
Normal
standby/
Eco power
standby ->
On
Brieypressthe
power button/
indicator above .
Green/Off ->
Amber/white
AC IN ~
9
English
EN
4 Connect AW9000
to your home Wi-
Fi network
To connect AW9000 to your existing home Wi-
Finetwork,youneedtoapplyyourhomeWi-Fi
settings to AW9000.
Choose your best setup method based on the
preconditions listed below.
Platform
of your
mobile
device
Type
of your
Wi-Fi
router
Other
re-
quire-
ment
Setup method
iOS Non-WPS No Choose option
1 (see 'Option 1:
Set up wireless
connection to a
non-WPS router
through an iOS
device' on page
9).
Android Non-WPS No Choose option
2 (see 'Option 2:
Set up through
a non-WPS
Wi-Fi router and
Android device'
on page 12).
Either
iOS or
Android
WPS No Choose option
3 (see 'Option 3:
Set up wireless
connection to a
WPS router' on
page 14).
Either
iOS or
Android
Either
non-
WPS or
WPS
You
have an
Eth-
ernet
cable.
Choose option
4 (see 'Op-
tion 4: Set up
wired connec-
tion through an
Ethernet cable'
on page 16).
Before connection of AW9000 to your home
Wi-Finetwork,makesurethat:
a your Wi-Fi router is powered on and
working properly.
b AW9000 has been powered on and
booted up successfully (see 'Connect
powerandswitchon'onpage8).
c you have jotted down your Wi-Fi
password.
Onceconnectedsuccessfully,AW9000will
remember your home Wi-Fi settings. Then you
can play music or listen to Internet radio via
Philips AirStudio+ Lite whenever AW9000 is
powered on and connected to your home Wi-
Fi network automatically.
Option 1: Set up wireless
connection to a non-WPS
router through an iOS device
1 Beforesetup,makesurethatyouriOS
device is connected to your home Wi-Fi
network.
2 Select Standard SETUP and tap Next.
10 EN
3 Read the Wi-Fi setup instructions on the
app.
4 Asinstructed,brieypressWI-FI SETUP
on the back of the main speaker.
» The power/status indicator starts to
blink amber and white alternately.
» A new Wi-Fi network created by
AW9000willappear,withthenetwork
name (SSID) of Philips_Install.
WiFi SETUP
< 3S
< 30S
5 Tap Nextontheaboveappscreen,and
then read how to proceed with network
setup.
6 Asinstructed,exittheapp,andthenselect
Philips_Install from the list of available
Wi-Fi networks.
11
English
EN
7 Make sure that your iOS device is
connected to Philips_Install,andthengo
back to Philips AirStudio+ Lite.
8 Wait until the password input box appears.
9 Enter the password of your home Wi-Fi
network,tapDonetonishinput,andthen
tap Next.
* If your Wi-Fi password contains such special
characters as #/:/;/', you need to change your
password.
10 Nameyourspeakerasyoulike,andthen
tap OK to connect AW9000 to your
home Wi-Fi network.
11 Wait until the power/status indicator on
AW9000 turns solid white.
» The following app screen appears.
» AW9000 is connected to your home
Wi-Fi network successfully.
12 EN
Tip
• Aftersuccessfulnetworksetup,youcantapRock n'
Roll on the above app screen to get ready for music
playdirectly.Formoredetails,gotothe'Play'section
(see 'Play' on page 17).
Option 2: Set up through a
non-WPS Wi-Fi router and
Android device
1 Beforesetup,makesurethatyourAndroid
device is connected to your home Wi-Fi
network.
2 Select Standard SETUP and tap Next.
3 Read the Wi-Fi setup instructions on the
app.
4 Asinstructed,brieypressWI-FI SETUP
on the back of the main speaker.
» The power/status indicator starts to
blink amber and white alternately.
» A new Wi-Fi network created by
AW9000willappear,withthenetwork
name (SSID) of Philips_Install.
WiFi SETUP
< 3S
< 30S
13
English
EN
5 Tap Next on the above app screen.
» Your Android device starts to connect
with the new Wi-Fi network created
by AW9000 automatically.
6 Wait until the speaker is found.
7 Enter the password of your home Wi-Fi
network,andthentapNext.
* If your Wi-Fi password contains such special
characters as #/:/;/', you need to change your
password.
8 Nameyourspeakerasyoulike,andthen
tap OK to connect AW9000 to your
home Wi-Fi network.
14 EN
9 Wait until the power/status indicator on
AW9000 turns solid white.
» AW9000 is connected to your home
Wi-Fi network successfully.
Note
• Aftersuccessfulnetworksetup,youcantapRock n'
Roll on the above app screen to get ready for music
playdirectly.Formoredetails,gotothe'Play'section
(see 'Play' on page 17).
Option 3: Set up wireless
connection to a WPS router
1 Select Wi-Fi PROTECTED SETUP and tap
Next.
2 Read the WPS setup instructions.
3 Asinstructed,pressandholdWI-FI SETUP
on the back of the main speaker.
» The power/status indicator blinks
amber and green alternately.
WiFi SETUP
> 4S
15
English
EN
4 Press the WPS button on your home Wi-Fi
router.
5 Wait until the power/status indicator on
AW9000turnssolidwhite,thentapNext
on the app screen..
» The following app screen appears.
» AW9000 is connected to your home
Wi-Fi network successfully.
WPS
Tip
• ForsomeWi-Firouters,youmayneedtoholdthe
WPS button for Wi-Fi connection or enable the WPS
PBCfunctionfromtheroutercongurationpages.See
theusermanualsofthespecicroutersfordetails.
• Aftersuccessfulnetworksetup,youcantapRock n'
Roll on the above app screen to get ready for music
playdirectly.Formoredetails,gotothe'Play'section
(see 'Play' on page 17).
Option 4: Set up wired
connection through an
Ethernet cable
Note
• Ifyouusewiredconnection,youjustneedtoselect
Speaker already setup on the initial Setup page (see
'Download Philips AirStudio+ Lite to your smartphone
or tablets' on page 6).
1 Ifyouhavetriedwirelessconnection,
beforesetupofwiredconnection,you
need to reset the wireless Hi-Fi speaker
(see 'Troubleshooting' on page 27).
16 EN
2 Connect an Ethernet cable (not supplied)
to:
• the ETHERNET socket on the back of
the device
• one of the Ethernet ports on your
home Wi-Fi router
3 Wait until the power/status indicator turns
solid white.
» AW9000 is connected to your home
Wi-Fi network successfully.
LAN4To Modem12V=1A ResetLAN3 LAN2 LAN1
ETHERNET
ETHERNET
17
English
EN
5 Play
Note
• TostreammusictothespeakerviaDLNAUPnP,use
your favorite app from your smartphone or PC/Mac
that supports DLNA UPnP.
Listen to Internet radio
stations through AW9000
1 Run Philips AirStudio+ Lite on your iOS
or Android smartphone or tablet.
2 Search for an Internet radio station by its
nameorlocation,languageetc.
3 TotunetoanInternetradiostation,select
and tap its name in the result list.
18 EN
Preset Internet radio stations
1 Tune to an Internet radio station and tap
.
» A list of preset radio stations appears.
2 Tap a row in the list where you want to
addthepresetstation.Forexample,ifyou
want to assign preset number 2 to this
station,tapthesecondrow.
» Amessagepopsup,inwhichthe
station name and preset number are
shown.
3 Tap OKinthemessageboxtoconrm.
» The station is added into your list of
preset radio stations.
4 Repeat the above procedures to add more
presets.
Tip
• Youcannotdeleteapresetradiostationdirectly,but
you can replace it with another radio station. For
example,ifyouwanttodeleteastationatpreset#3,
youcantunetoanotherradiostation,tap ,andthen
tap the 3rd row to replace the previous station.
To tune to a preset radio station
• Press numerickeys(1-5) on AW9000
directlytotunetotherstvepreset
radio stations.
• You can also go to Presets on the app
screen and tap one of your preset stations
to start play.
19
English
EN
Create your favorite list
1 Tune to an Internet radio station.
2 Tap to add the station into your favorite
list directly.
3 Repeat the above procedures to add more
favorite stations.
To tune to a favorite radio station
• Go to Favorite stations on the app screen and
tap one of your favorite stations to start play.
To delete a favorite radio station
1 Tune to the radio station and tap .
» The radio station if removed from your
favorite list directly.
Play from an external device
You can also listen to an external audio player
through the device.
Connect through the MP3-LINK socket:
1 Connect an MP3 link cable (not supplied) to:
• the MP3-LINK socket on the back of
the device.
• the headphone socket on an external
audio player.
20 EN
2 Start play on the external audio player and
adjust volume.
» You can hear music from the wireless
Hi-Fi speaker.
3 Use the controls on your audio player to
control music play.
Connect through the OPTICAL or COAXIAL
socket:
1 Connect an optical or coaxial cable (not
supplied) to:
• the OPTICAL or COAXIAL socket on
the back of AW9000.
• the corresponding digital output socket
on an external audio device.
2 Start play on the external audio player and
adjust volume.
» You can hear music from the wireless
Hi-Fi speaker.
3 Use the controls on your audio player to
control music play.
Connect through the AUX IN L/R sockets:
1 Connect a pair of RCA audio cables (red/
white; not supplied) to:
• the AUX IN L/R sockets on the back
of AW9000.
• the audio output sockets on an
external audio device.
MP3 LINK
2 Start play on the external audio player and
adjust volume.
» You can hear music from the wireless
Hi-Fi speaker.
3 Use the controls on your audio player to
control music play.
To switch to the external audio source manually:
1 Run Philips AirStudio+ Lite on your iOS
or Android smartphone or tablet.
2 Tap Services -> MP3 link to select the
MP3 link source.
Tip
• You can also press a source key on AW9000 to select
the corresponding audio source directly.
21
English
EN
6 Upgrade
firmware
ToimprovetheperformanceofAW9000,
Philipsmayofferyounewrmwareforupgrade
of your AW9000.
Warning
• Always connect your AW9000 to AC power for
rmwareupgrade.NeverpoweroffyourAW9000
duringrmwareupgrade.
1 Make sure that AW9000 is powered on
and connected to the same Wi-Fi network
as your smartphone or tablet.
2 Make sure that your home Wi-Fi network
is connected to the Internet.
3 Run Philips AirStudio+ Lite on your iOS
or Android smartphone or tablet.
4 Tap Services -> Device settings.
5 Tap Check online.
» Ifanewrmwareisavailable.A
rmwareupgradepromptpopsup
automatically.
6 Tap OK on the prompt message to start
rmwareupgrade.
» The power/status indicator on
AW9000ashesamberduringthis
process.
7 Waituntilthermwareupgradeprocess
nishes,thentapOK on the prompt
message to restart the device.
22 EN
7 Product
information
Note
• Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output
Power
2 X 50 W RMS @ 10%
THD
Frequency
Response
80Hz-18kHz,±3dB
Signal to Noise
Ratio
> 86 dB
MP3 Link 900 mV RMS 20 kohm
Speakers
Speaker Impedance 8 ohm
Speaker Driver 2xdometweeters,4x
3.5” woofers
Sensitivity 82 dB/m/W
Wireless
Wireless standard 802.11b/g
Wireless security WEP,10or26hexdigit
keys
WPA (TKIP) or WPA2
(TKIP / AES) with
8 - 40 ASCII printable
characters passphrase
Frequencyrange 2412-2462MHz(CH1-
CH11)(for/79,/37,/55,
/97)
2412-2472MHz(CH1-
CH13)(for/12,/10,/05)
PBC (one button
push)
Ye s
General information
AC power Input:100~240V,
50/60Hz
Operation Power
Consumption
40 W
Power
Consumption in
Standby Mode
< 0.5 W
Dimensions
- Main Unit
(W x D x H)
511 x 268 x 434 mm
Weight
- With Packing
- Main Unit
13 kg
10 kg
23
English
EN
8 Troubleshooting
Warning
• Never remove the casing of this apparatus.
Tokeepthewarrantyvalid,nevertrytorepair
the system yourself.
If you encounter problems when using this
apparatus,checkthefollowingpointsbefore
requestingservice.Iftheproblemremains
unsolved,gotothePhilipswebsite(www.
philips.com/welcome). When you contact
Philips,ensurethattheapparatusisnearby
and the model number and serial number are
available.
No power
•Make sure that the AC power plug of the
device is connected properly.
•Make sure that there is power at the AC
outlet.
•Check whether the device is in Eco
standby mode (see 'Connect power and
switch on' on page 8).
No sound
•Check whether the device is muted. The
power/statusindicatorasheswhitewhen
the device is muted. Adjust volume on the
Philips AirStudio+ Lite app or on AW9000
directly.
•Ifyouhavechosenthewiredconnection,
check whether the Ethernet cable has
been connected properly and securely
(see 'Option 4: Set up wired connection
through an Ethernet cable' on page 16).
•Check the Wi-Fi network connection.
Set up the network again if needed (see
'Connect AW9000 to your home Wi-Fi
network' on page 9).
•If the audio source is an external audio
player,adjustvolumeontheaudioplayer
directly.
No response from the device
•RestartAW9000,andthensetupthe
Wi-Fi network for AW9000 again (see
'Connect AW9000 to your home Wi-Fi
network' on page 9).
•Disconnect and reconnect the AC power
plug,andthenswitchonthedeviceagain.
Wi-Fi network connection failed
•This device does not support the WPS-
PIN method.
•Enable SSID broadcast on the Wi-Fi router.
•Keep away from potential sources of
interferencewhichmayaffectWi-Fisignal,
such as microwave ovens.
•Make sure that the SSID name of your
home router consists of alphanumeric
characters,withnospaceorspecial
characterslike%/#/*/#inserted.The
network password should not consist of
#/:/;/'.
•If you choose to rename your AW9000
manually on the Philips AirStudio+ Lite
app,donotusespecialcharactersor
symbols.
•ForsomenewtypesofWi-Firouters,a
network name (SSID) may be created
automatically when you use WPS for
connection. Always change the default
network name (SSID) to a simple one that
consistsofalphanumericalcharacters,and
also change the Wi-Fi security mode to
secure your network.
Wired network connection failed
•Ifyouhavetriedwirelessconnection,
beforesetupofwiredconnection,you
need to reset the wireless Hi-Fi speaker.
Follow the procedures below to reset the
device:
1 Unplug the power cord.
2 Hold the numeric key 1 and plug the
power cord again.
» Thepower/statusindicatorashes
amber,thenturnssolidamber,andafter
awhilestartstoashamberagain.
24 EN
3 Release the numeric key 1.
Note
• Do not release the numeric key 1 until the power/
statusindicatorashesamberforasecondtime.
Occasional breaking of music streaming
Do one or all of the following:
•Move AW9000 closer to your Wi-Fi router.
•Remove any obstacles between AW9000
and your Wi-Fi router.
•Avoid using Wi-Fi channel which is
overlapped by the nearby Wi-Fi network.
•Check if your network speed is fast enough
(in cases where multiple devices share the
samerouter,thewirelessperformancemay
be affected). Turn off the other devices
connected to your home router.
•Enable the Quality of Service (QoS)
option (if available on the Wi-Fi router).
•Turn off other Wi-Fi routers.
The power/status indicator remains red. What
can I do?
•You need to recover the device with an
Ethernet cable.
1 Make sure that your router is connected to
the Internet.
2 Connect the device to the router through
an Ethernet cable (see 'Option 4: Set up
wired connection through an Ethernet
cable' on page 16).
3 Waitforautomaticrecoveryofthedevice,
which may take up to 10 minutes.
25
English
EN
9 Appendix:
Understand
meanings of
LED colors
LED color Meaning
Blinking
amber
AW9000 is booting up or
rmwareupgradeisinprogress.
Solid
amber
AW9000 is not connected to any
network.
White
and
amber
alternately
AW9000 is in wireless setup
mode,assistedbytheAirStudio+
Lite app. Follow the set-up
instructions on the app.
Green
and
amber
alternately
Wireless setup by the WPS
method has been triggered or is
ongoing.
Solid
white
AW9000 is connected to a Wi-Fi
network and is ready for wireless
music streaming.
Blinking
white
AW9000 is muted.
Solid
green
AW9000 is in normal standby
mode (see 'Connect power and
switch on' on page 8).
Solid red AW9000 is malfunctioning.
You need to recover it (see
'Troubleshooting' on page 27).
AW9000 Device Terms & Conditions of Use
These Device Terms and Conditions of Use are a legal agreement between you and Gibson
Innovations Limited , a Hong Kong company with a registered office at 5 Science Park East Avenue,
Hong Kong Science Park, Shatin, New Territories, Hong Kong and its affiliated companies
(individually and collectively “Gibson Innovations”).
Terms and Conditions of Use
Congratulations on your purchase of a AW9000 (“Device”). These Terms and Conditions of Use
give you the rights to use certain features on your Device. You must agree to these Terms and
Conditions of Use before using the Device. Your use of the Device constitutes your agreement to be
bound by these Terms and Conditions of Use and will give you the right to access these features. If
you do not agree to these Terms and Conditions of Use, you may return your Device to the point of
purchase. These Terms and Conditions of Use supplement, and do not replace, any terms,
conditions or disclaimers which were provided with your purchase of the Device. If you use the
accompanying AW9000 (the “Software”) together with the Device, you will also must also agree to
the separate Software End-User License Agreement. All such terms, conditions and disclaimers
remain in full force and effect.
Eligibility for Registration.
You must be at least 14 years of age to assume the responsibilities of these Terms and Conditions of
Use. If you are under 14 years of age, you may not use the Device unless one of your parents or
legal guardians assumes the responsibilities of these Terms and Conditions of Use. Your use of the
Device constitutes your representation that you are either 14 years of age or, if you are under 14
years of age, that your parent or legal guardian has assumed the responsibilities of these Terms
and Conditions of Use.
Restrictions on Modification of your Device
You agree not to tamper with or otherwise modify or attempt to modify the Device in any way
(including through the use of software or by making physical alterations to the Device). You agree
that you will not circumvent or attempt to circumvent technological measures employed to control
access to, or the rights in, any content. You agree that you will not circumvent or attempt to
circumvent any copy management system by any means. You agree that you will not decipher or
attempt to decipher cryptographic keys or otherwise defeat or attempt to defeat any security
features implemented in the Device or in the content. You agree that you will not use the Device for
any unauthorized purpose or in contravention of any law or regulation.
Disclaimers Regarding Content
The content which is accessible through your Device may not be controlled or programmed by
Gibson Innovations. GIBSON INNOVATIONS IS NOT LIABLE FOR CONTENT OR ITS NATURE OR
DELIVERY. GIBSON INNOVATIONS DOES NOT ENDORSE ANY OPINIONS EXPRESSED IN ANY CONTENT
RECEIVED THROUGH YOUR DEVICE. GIBSON INNOVATIONS DOES NOT GUARANTEE THE
TRUTHFULNESS, ACCURACY, RELIABILITY, COMPLETENESS OR TIMELINESS OF CONTENT. YOU
AGREE THAT ANY RELIANCE ON CONTENT IS AT YOUR OWN RISK.
Limitations on Access to Content
Gibson Innovations does not guarantee access to any particular content. Gibson Innovations may, in
its discretion, add or remove access to any content at any time. Gibson Innovations does not
guarantee continued access to any specific online service provider. Gibson Innovations may, in its
discretion, add or remove access to any specific online service provider.
Rights in Content
Content may be protected by copyright laws or other intellectual property or proprietary laws. In
some situations, such as use of the Device in a commercial environment, it may be necessary for
you to obtain, at your own risk, a license or other authorization to use such content. You agree
that, in the event such a license or authorization is necessary, it is your responsibility to obtain any
such license or authorization. You agree that you are solely liable for any damages you may incur
resulting from your failure to obtain the proper license or authorization for use of the content
accessible through the Device. You agree that Gibson Innovations will have no liability to you with
regard to your use of the content.
Changes in Features
Gibson Innovations may, in its discretion, change the features of the Device, including adding
features to, or removing features from, the Device. Some new features may require changes to
these Terms and Conditions of Use. Your use of those new features will constitute your agreement
to the revised Terms and Conditions of Use.
Software and Intellectual Property Rights
You may need to use certain software programs to use or have full access to certain features of the
Device. You received certain software with the purchase of the Device and may receive other
software from time to time in the future. Most of that software is contained in the Device and is
not accessible to you. Some of that software is owned by Gibson Innovations and some is owned
by others. Your use of software owned by Gibson Innovations is subject to these Terms and
Conditions of Use and any applicable license agreement. Your use of software owned by others is
governed by their applicable license agreements. Your use of software does not transfer any title
or ownership rights in the software to you. Gibson Innovations, its affiliates and their licensors
retain all their respective rights in software and other intellectual property, including copyrights,
patent rights, and rights in its trademarks and trade names. Philips and the Philips’ Shield Emblem
are registered trademarks of Koninklijke Philips N.V. and are used by Gibson Innovations under
license from Koninklijke Philips N.V. You agree that you will not disassemble, decompile, create
derivative works of, reverse engineer, modify, sublicense, distribute the software or use the
software for any unauthorized purpose or in contravention of any law or regulation.
Privacy and your personal information
Gibson Innovations believes strongly in protecting the privacy of the personal data you share with
us. Any processing of personal data through the Device, including its hardware, related software or
websites under the control of Gibson Innovations, is subject to the Gibson Innovations privacy
notice. We may share your personal data with service providers, business partners and other third
parties in accordance with applicable law. It is important that you read and understand the privacy
notice of Gibson Innovations at http://www.gibsoninnovations.com/en/privacy-notice.
Warranty Disclaimer
GIBSON INNOVATIONS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, THAT
THE DEVICE WILL MEET YOUR REQUIREMENTS OR THAT THE USE OF THE DEVICE WILL BE
UNINTERRUPTED, TIMELY, SECURE OR FREE FROM ERRORS. GIBSON INNOVATIONS MAKES NO
WARRANTY AS TO THE CONTENT CARRIED IN ANY STREAM. GIBSON INNOVATIONS MAKES NO
REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, AS TO THE INFORMATION OR CONTENT
ACCESSED THROUGH YOUR DEVICE OR TO YOUR RELIANCE ON, OR USE OF, ANY INFORMATION OR
CONTENT ACCESSED THROUGH YOUR DEVICE. SPECIFIC WARRANTIES WERE PROVIDED WITH YOUR
PURCHASE OF YOUR DEVICE AND THOSE WARRANTIES, INCLUDING ANY DISCLAIMERS TO THOSE
WARRANTIES, CONTINUE TO APPLY. Because some jurisdictions do not permit the disclaimer of
implied warranties, such disclaimers may not apply to you.
Limitation of Liability
GIBSON INNOVATIONS WILL NOT BE LIABLE TO YOU OR TO ANY OTHER PARTY FOR ANY INDIRECT,
INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR LOST
SAVINGS) OR FOR LOSS OF DATA OR BUSINESS INTERRUPTION ARISING OUT OF OR RELATING TO
YOUR USE OF THE DEVICE WHETHER OR NOT SUCH DAMAGES ARE BASED ON TORT, WARRANTY,
CONTRACT OR ANY OTHER LEGAL THEORY - EVEN IF GIBSON INNOVATIONS HAS BEEN ADVISED, OR IS
AWARE, OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL GIBSON INNOVATIONS
CUMULATIVE LIABILITY FOR DAMAGE (FROM ANY CAUSE WHATSOEVER) EXCEED THE AMOUNT YOU
PAID FOR YOUR DEVICE.
Miscellaneous
This agreement will be governed by the laws of the jurisdiction in which the Device was sold and you
hereby consent to the non-exclusive jurisdiction of courts in the relevant country. If any provision of
this agreement is invalid or unenforceable under applicable law, such provision will be deemed
modified to the extent necessary to render such provision valid and enforceable and the other
provisions of this agreement will remain in full force and effect. These Terms and Conditions of Use
will not be governed by the United Nations Convention of Contracts for the International Sale of
Goods, the application of which is hereby expressly waived.
BY USING YOUR DEVICE, YOU REPRESENT THAT YOU HAVE READ AND UNDERSTOOD THESE TERMS
AND CONDITIONS OF USE AND THAT YOU ACCEPT THEM.
SOFTWARE END USER LICENSE AGREEMENT
THIS SOFTWARE END USER LICENSE AGREEMENT (“THIS AGREEMENT”) IS A LEGAL AND BINDING
AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR ENTITY) AND GIBSON INNOVATIONS
LIMITED , A HONG KONG COMPANY WITH A REGISTERED OFFICE AT 5 SCIENCE PARK EAST AVENUE,
HONG KONG SCIENCE PARK, SHATIN, NEW TERRITORIES, HONG KONG AND ITS AFFILIATED
COMPANIES (INDIVIDUALLY AND COLLECTIVELY “GIBSON INNOVATIONS”). THIS AGREEMENT GIVES
YOU THE RIGHT TO USE AW9000 AND RELATED SOFTWARE (THE “SOFTWARE”) INCLUDING USER
DOCUMENTATION IN ELECTRONIC FORM WHICH MAY HAVE BEEN PROVIDED SEPARATELY OR
TOGETHER WITH A GIBSON INNOVATIONS PRODUCT (THE “DEVICE”) OR A MOBILE PHONE OR
TABLET. BY DOWNLOADING, INSTALLING OR OTHERWISE USING THE SOFTWARE, YOU ACCEPT
AND AGREE TO BE BOUND BY ALL OF THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU
DO NOT AGREE TO THESE TERMS AND CONDITIONS, DO NOT DOWNLOAD, INSTALL OR OTHERWISE
USE THE SOFTWARE. IF YOU ACQUIRED THE SOFTWARE IN TANGIBLE MEDIA E.G. CD WITHOUT THE
OPPORTUNITY TO REVIEW THIS LICENSE AND DO NOT ACCEPT THESE TERMS, YOU MAY RECEIVE A
FULL REFUND OF THE AMOUNT, IF ANY, THAT YOU PAID FOR THE SOFTWARE WITHIN 30 DAYS
FROM THE DATE OF PURCHASE WITH PROOF OF PAYMENT.
1. Grant of License.
This Agreement grants you a non-exclusive, nontransferable, non-sub licensable license to install and
use, on the Device or a mobile phone or tablet, as applicable, one (1) copy of the specified version of
the Software in object code format as set out in the user documentation solely for your personal
use. The Software is “in use” when it is loaded into your mobile phone or tablet or the Device.
2. Ownership.
The Software is licensed and not sold to you. This Agreement grants you only the right to use the
Software, but you do not acquire any rights, express or implied, in the Software other than those
specified in this Agreement. GIBSON Innovations and its licensors retain all right, title, and interest
in and to the Software, including all patents, copyrights, trade secrets, and other intellectual
property rights incorporated therein. The Software is protected by copyright laws, international
treaty provisions, and other intellectual property laws. Therefore, other than as expressly set forth
herein, you may not copy the Software without prior written authorization of GIBSON Innovations,
except that you may make one (1) copy of the Software for your back-up purposes only. You may
not copy any printed materials accompanying the Software, nor print more than one (1) copy of
any user documentation provided in electronic form, except that you may make one (1) copy of
such printed materials for your back-up purposes only.
3. License Restrictions.
Except as provided otherwise herein, you shall not rent, lease, sublicense, sell, assign, loan, or
otherwise transfer the Software. You shall not, and you shall not permit any third party, to reverse
engineer, decompile, or disassemble the Software, except to the extent that applicable law
expressly prohibits the foregoing restriction. You may not remove or destroy any product
identification, copyright notices, or other proprietary markings or restrictions from the Software.
All titles, trademarks, and copyright and restricted rights notices shall be reproduced on your back
up copy of the Software. You may not modify or adapt the Software, merge the Software into
another program or create derivative works based upon the Software.
4. Open Source Software.
(a) This software may contain components that are subject to open-source terms, as stated in the
documentation accompanying the Device. This Agreement does not apply to this software as such.
(b) Your license rights under this Agreement do not include any right or license to use, distribute or
create derivative works of the Software in any manner that would subject the Software to Open
Source Terms. “Open Source Terms” means the terms of any license that directly or indirectly (1)
create, or purport to create, obligations for Gibson Innovations with respect to the Software and/or
derivative works thereof; or (2) grant, or purport to grant, to any third party any rights or
immunities under intellectual property or proprietary rights in the Software or derivative works
thereof.
5. Termination.
This Agreement shall be effective upon installation or first use of the Software and shall terminate (i)
at the discretion of Gibson Innovations, due to your failure to comply with any term of this
Agreement; or (ii) upon destruction of all copies of the Software and related materials provided to
you by Gibson Innovations hereunder. Gibson Innovations’ rights and your obligations shall survive
the termination of this Agreement.
6. Upgrades.
Gibson Innovations may, at its sole option, make upgrades to the Software available by general
posting on a website or by any other means or methods. Such upgrades may be made available
pursuant to the terms of this Agreement or the release of such upgrades to you may be subject to
your acceptance of another agreement. By using the Software, you consent to us collecting and
using technical information about the Device and Software to improve our products and to provide
any services to you.
7. Support Services.
Gibson Innovations is not obligated to provide technical or other support (“Support Services”) for
the Software. If Gibson Innovations does provide you with Support Services, these will be
governed by separate terms to be agreed between you and Gibson Innovations.
8. Limited Software Warranty.
Gibson Innovations provides the Software ‘as is’ and without any warranty except that the Software
will perform substantially in accordance with the documentation accompanying the Software for a
period of one year after your first download, installation or use of the Software, whichever occurs
first. Gibson Innovations’ entire liability and your exclusive remedy for breach of this warranty shall
be, at Gibson Innovations’ option, either (i) return of the price paid by you for the Software (if any);
or (b) repair or replacement of the Software that does not meet the warranty set forth herein and
that is returned to Gibson Innovations with a copy of your receipt. This limited warranty shall be
void if failure of the Software has resulted from any accident, abuse, misuse or wrongful
application. Any replacement Software will be warranted for the remainder of the original
warranty period or thirty
(30) days, whichever is longer. This limited warranty shall not apply to you if the Software was
provided to you free of charge on an evaluation only basis.
9. NO OTHER WARRANTIES.
EXCEPT AS SET FORTH ABOVE, GIBSON INNOVATIONS AND ITS LICENSORS DO NOT WARRANT
THAT THE SOFTWARE WILL OPERATE ERROR FREE OR UNINTERRUPTED, OR WILL MEET YOUR
REQUIREMENTS. YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO
ACHIEVE YOUR INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS
OBTAINED FROM THE SOFTWARE. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
GIBSON INNOVATIONS AND ITS LICENSORS DISCLAIM ALL WARRANTIES AND CONDITIONS,
WHETHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND ACCURACY OR COMPLETENESS OF
RESULTS WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING MATERIALS. THERE IS NO
WARRANTY AGAINST INFRINGEMENT. GIBSON INNOVATIONS DOES NOT WARRANT THAT YOU
WILL BE ABLE TO DOWNLOAD, COPY, STORE, DISPLAY, TRANSFER, AND/OR PLAY SECURE
CONTENT.
10. LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES WILL GIBSON INNOVATIONS OR ITS LICENSORS BE LIABLE FOR ANY
CONSEQUENTIAL, SPECIAL, INDIRECT, INCIDENTAL OR PUNITIVE DAMAGES WHATSOEVER,
INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS OR REVENUES, BUSINESS
INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF USE OR OTHER
PECUNIARY LOSS, EVEN IF GIBSON INNOVATIONS OR ITS LICENSORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. YOU ACKNOWLEDGE THAT YOU MAY BE CHARGED BY YOUR
MOBILE SERVICE PROVIDERS FOR INTERNET ACCESS IN CONNECTION WITH USE OF THE SOFTWARE,
AND YOU ACCEPT RESPONSIBILITY FOR ANY SUCH CHARGES. IN NO EVENT SHALL GIBSON
INNOVATIONS’ OR ITS LICENSORS’ AGGREGATE LIABILITY FOR DAMAGES ARISING OUT OF THIS
AGREEMENT EXCEED THE GREATER OF THE PRICE ACTUALLY PAID BY YOU FOR THE SOFTWARE.
11. Trademarks.
Certain of the product and other names used in this Agreement, the Software, and the printed user
documentation may constitute trademarks of Gibson Innovations, its licensors or other third
parties. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used by Gibson Innovations under license from Koninklijke Philips N.V. You are not
authorized to use any such trademarks.
12. Export Administration.
You agree that you will not directly or indirectly, export or re-export the Software to any country for
which the United States Export Administration Act, or any similar United States law or regulation
requires an export license or other U.S. Government approval, unless the appropriate export license
or approval has first been obtained. By downloading or installing the Software you agree to abide
by this Export provision.
13. Governing law.
This Agreement is governed by the laws of your country of residence, without reference to its
conflict of laws principles. Any dispute between you and Gibson Innovations regarding this
Agreement shall be subject to the non-exclusive jurisdiction of the courts of your country of
residence.
14. General.
This Agreement, together with the Device End User License Agreement, contains the entire
agreement between you and Gibson Innovations and supersedes any prior representation,
undertaking or other communication or advertising with respect to the Software and user
documentation. If any part of this Agreement is held invalid, the remainder of this Agreement will
continue in full force and effect. This Agreement shall not prejudice the statutory rights of any party
dealing as a consumer.
Open Source Software Notice
Those software identified from Gibson Innovations Limited contain the open source software details
below. Please refer to the indicated open source licenses for the terms and conditions of their use.
Linux Kernel v2.6.30.9
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
Also note that the GPL below is copyrighted by the Free Software
Foundation, but the instance of code that it refers to (the Linux
kernel) is copyrighted by me and others who actually wrote it.
Also note that the only valid version of the GPL as far as the kernel
is concerned is _this_ particular version of the license (ie v2, not
v2.2 or v3.x or whatever), unless explicitly otherwise stated.
Linus Torvalds
--------------------------------------------
BOA v0.94 14rc21
/*
* Boa, an http server
* Copyright (C) 1995 Paul Phillips <paulp@go2net.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 1, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
-------------------------------------
bridge-utils v0.9.5
/*
* Copyright (C) 2000 Lennert Buytenhek
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-------------------------------------
busybox v1.13
* Copyright (C) 1997 Theodore Ts'o.
*
* %Begin-Header%
* This file may be redistributed under the terms of the GNU Public
* License.
-------------------------------------------
libnl v1.1
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation version 2.1
* of the License.
*
* Copyright (c) 2003-2011 Thomas Graf <tgraf@suug.ch>
*/
--------------------------------------
lzma v4.65
http://7-zip.org/sdk.html
LZMA SDK is placed in the public domain.
--------------------------------------
squashfs v4.0
GNU GENERAL PUBLIC LICENSE Version 2 (see GNU General Public License (GPL) v2)
---------------------------------------
udhcp v0.9.9
# Copyright (C) 1999-2004 by Erik Andersen <andersen at codepoet.org>
#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
+# Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
----------------------------------------
wireless_tools v25
* This files is released under the GPL license.
* Copyright (c) 1997-2002 Jean Tourrilhes <jt@hpl.hp.com>
------------------------------------------
zlib v1.2.3
Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
This software is provided 慳s-is', without any express or implied warranty. In no event will the authors
be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including commercial applications,
and to alter it and redistribute it freely, subject to the following restrictions:
The origin of this software must not be misrepresented; you must not claim that you wrote the original
software. If you use this software in a product, an acknowledgment in the product documentation
would be appreciated but is not required.
Altered source versions must be plainly marked as such, and must not be misrepresented as being the
original software.
This notice may not be removed or altered from any source distribution.
Jean-loup Gailly Mark Adler
jloup@gzip.org madler@alumni.caltech.edu
------------------------------------------------
Opus v0.1.9
/* Copyright (c) 2002-2007 Jean-Marc Valin
Copyright (c) 2008 CSIRO
Copyright (c) 2007-2013 Xiph.Org Foundation
File: opusdec.c
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
------------------------------------------------------------
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public License is intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users. This General Public License applies to
most of the Free Software Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public
License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it if you want it, that you can change the
software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to
ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the
recipients all the rights that you have. You must make sure that they, too, receive or can get the source
code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which
gives you legal permission to copy, distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain that everyone understands that
there is no warranty for this free software. If the software is modified by someone else and passed on,
we want its recipients to know that what they have is not the original, so that any problems introduced
by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger
that redistributors of a free program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any patent must be licensed for
everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright
holder saying it may be distributed under the terms of this General Public License. The "Program",
below, refers to any such program or work, and a "work based on the Program" means either the
Program or any derivative work under copyright law: that is to say, a work containing the Program or a
portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term "modification".) Each licensee is
addressed as "you".
Activities other than copying, distribution and modification are not covered by this License; they are
outside its scope. The act of running the Program is not restricted, and the output from the Program is
covered only if its contents constitute a work based on the Program (independent of having been made
by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to
the absence of any warranty; and give any other recipients of the Program a copy of this License along
with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on
the Program, and copy and distribute such modifications or work under the terms of Section 1 above,
provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and
the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived
from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under
the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when
started running for such interactive use in the most ordinary way, to print or display an announcement
including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you
provide a warranty) and that users may redistribute the program under these conditions, and telling the
user how to view a copy of this License. (Exception: if the Program itself is interactive but does not
normally print such an announcement, your work based on the Program is not required to print an
announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not
derived from the Program, and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole which is a work based on
the Program, the distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by
you; rather, the intent is to exercise the right to control the distribution of derivative or collective works
based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a
work based on the Program) on a volume of a storage or distribution medium does not bring the other
work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2 above provided that you also do one of the
following:
a) Accompany it with the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge
no more than your cost of physically performing source distribution, a complete machine-readable copy
of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source
code. (This alternative is allowed only for noncommercial distribution and only if you received the
program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an
executable work, complete source code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need not include anything that
is normally distributed (in either source or binary form) with the major components (compiler, kernel,
and so on) of the operating system on which the executable runs, unless that component itself
accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place,
then offering equivalent access to copy the source code from the same place counts as distribution of
the source code, even though third parties are not compelled to copy the source along with the object
code.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under
this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and
will automatically terminate your rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses terminated so long as such parties
remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants
you permission to modify or distribute the Program or its derivative works. These actions are prohibited
by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any
work based on the Program), you indicate your acceptance of this License to do so, and all its terms and
conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any further restrictions on the recipients'
exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties
to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of
this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence you may not distribute the Program at all.
For example, if a patent license would not permit royalty-free redistribution of the Program by all those
who receive copies directly or indirectly through you, then the only way you could satisfy both it and this
License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims
or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of
the free software distribution system, which is implemented by public license practices. Many people
have made generous contributions to the wide range of software distributed through that system in
reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of
this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who places the Program under this License may add
an explicit geographical distribution limitation excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In such case, this License incorporates the
limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License
from time to time. Such new versions will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this
License which applies to it and "any later version", you have the option of following the terms and
conditions either of that version or of any later version published by the Free Software Foundation. If
the Program does not specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is copyrighted by
the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of
our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE
RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM
AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
----------------------------------------------
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts
as the successor of the GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--
typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use
it too, but we suggest you first think carefully about whether this license or the ordinary General Public
License is the better strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public
Licenses are designed to make sure that you have the freedom to distribute copies of free software (and
charge for this service if you wish); that you receive source code or can get it if you want it; that you can
change the software and use pieces of it in new free programs; and that you are informed that you can
do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or
to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you
distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the
recipients all the rights that we gave you. You must make sure that they, too, receive or can get the
source code. If you link other code with the library, you must provide complete object files to the
recipients, so that they can relink them with the library after making changes to the library and
recompiling it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this
license, which gives you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library.
Also, if the library is modified by someone else and passed on, the recipients should know that what
they have is not the original version, so that the original author's reputation will not be affected by
problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make
sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive
license from a patent holder. Therefore, we insist that any patent license obtained for a version of the
library must be consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License.
This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite
different from the ordinary General Public License. We use this license for certain libraries in order to
permit linking those libraries into non-free programs.
When a program is linked with a library, whether statically or using a shared library, the combination of
the two is legally speaking a combined work, a derivative of the original library. The ordinary General
Public License therefore permits such linking only if the entire combination fits its criteria of freedom.
The Lesser General Public License permits more lax criteria for linking other code with the library.
We call this license the "Lesser" General Public License because it does Less to protect the user's
freedom than the ordinary General Public License. It also provides other free software developers Less
of an advantage over competing non-free programs. These disadvantages are the reason we use the
ordinary General Public License for many libraries. However, the Lesser license provides advantages in
certain special circumstances.
For example, on rare occasions, there may be a special need to encourage the widest possible use of a
certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be
allowed to use the library. A more frequent case is that a free library does the same job as widely used
non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so
we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free programs enables a greater number of
people to use a large body of free software. For example, permission to use the GNU C Library in non-
free programs enables many more people to use the whole GNU operating system, as well as its variant,
the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that
the user of a program that is linked with the Library has the freedom and the wherewithal to run that
program using a modified version of the Library.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention
to the difference between a "work based on the library" and a "work that uses the library". The former
contains code derived from the library, whereas the latter must be combined with the library in order to
run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other program which contains a notice
placed by the copyright holder or other authorized party saying it may be distributed under the terms of
this Lesser General Public License (also called "this License"). Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data prepared so as to be conveniently
linked with application programs (which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work which has been distributed under these
terms. A "work based on the Library" means either the Library or any derivative work under copyright
law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications
and/or translated straightforwardly into another language. (Hereinafter, translation is included without
limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for making modifications to it. For a
library, complete source code means all the source code for all modules it contains, plus any associated
interface definition files, plus the scripts used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are
outside its scope. The act of running a program using the Library is not restricted, and output from such
a program is covered only if its contents constitute a work based on the Library (independent of the use
of the Library in a tool for writing it). Whether that is true depends on what the Library does and what
the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it,
in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to
the absence of any warranty; and distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on
the Library, and copy and distribute such modifications or work under the terms of Section 1 above,
provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and
the date of any change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms
of this License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an
application program that uses the facility, other than as an argument passed when the facility is invoked,
then you must make a good faith effort to ensure that, in the event an application does not supply such
function or table, the facility still operates, and performs whatever part of its purpose remains
meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined
independent of the application. Therefore, Subsection 2d requires that any application-supplied
function or table used by this function must be optional: if the application does not supply it, the square
root function must still compute square roots.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not
derived from the Library, and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole which is a work based on
the Library, the distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by
you; rather, the intent is to exercise the right to control the distribution of derivative or collective works
based on the Library.
In addition, mere aggregation of another work not based on the Library with the Library (or with a work
based on the Library) on a volume of a storage or distribution medium does not bring the other work
under the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to
a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that
they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer
version than version 2 of the ordinary GNU General Public License has appeared, then you can specify
that version instead if you wish.) Do not make any other change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General
Public License applies to all subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of the Library into a program that is not a
library.
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object
code or executable form under the terms of Sections 1 and 2 above provided that you accompany it
with the complete corresponding machine-readable source code, which must be distributed under the
terms of Sections 1 and 2 above on a medium customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place satisfies the requirement to distribute
the source code, even though third parties are not compelled to copy the source along with the object
code.
5. A program that contains no derivative of any portion of the Library, but is designed to work with the
Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in
isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library creates an executable that is a
derivative of the Library (because it contains portions of the Library), rather than a "work that uses the
library". The executable is therefore covered by this License. Section 6 states terms for distribution of
such executables.
When a "work that uses the Library" uses material from a header file that is part of the Library, the
object code for the work may be a derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be linked without the Library, or if the work
is itself a library. The threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data structure layouts and accessors, and small
macros and small inline functions (ten lines or less in length), then the use of the object file is
unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object
code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work
under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or
not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or link a "work that uses the Library"
with the Library to produce a work containing portions of the Library, and distribute that work under
terms of your choice, provided that the terms permit modification of the work for the customer's own
use and reverse engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the
Library and its use are covered by this License. You must supply a copy of this License. If the work during
execution displays copyright notices, you must include the copyright notice for the Library among them,
as well as a reference directing the user to the copy of this License. Also, you must do one of these
things:
a) Accompany the work with the complete corresponding machine-readable source code for the Library
including whatever changes were used in the work (which must be distributed under Sections 1 and 2
above); and, if the work is an executable linked with the Library, with the complete machine-readable
"work that uses the Library", as object code and/or source code, so that the user can modify the Library
and then relink to produce a modified executable containing the modified Library. (It is understood that
the user who changes the contents of definitions files in the Library will not necessarily be able to
recompile the application to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that
(1) uses at run time a copy of the library already present on the user's computer system, rather than
copying library functions into the executable, and (2) will operate properly with a modified version of
the library, if the user installs one, as long as the modified version is interface-compatible with the
version that the work was made with.
c) Accompany the work with a written offer, valid for at least three years, to give the same user the
materials specified in Subsection 6a, above, for a charge no more than the cost of performing this
distribution.
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent
access to copy the above specified materials from the same place.
e) Verify that the user has already received a copy of these materials or that you have already sent this
user a copy.
For an executable, the required form of the "work that uses the Library" must include any data and
utility programs needed for reproducing the executable from it. However, as a special exception, the
materials to be distributed need not include anything that is normally distributed (in either source or
binary form) with the major components (compiler, kernel, and so on) of the operating system on which
the executable runs, unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries
that do not normally accompany the operating system. Such a contradiction means you cannot use both
them and the Library together in an executable that you distribute.
7. You may place library facilities that are a work based on the Library side-by-side in a single library
together with other library facilities not covered by this License, and distribute such a combined library,
provided that the separate distribution of the work based on the Library and of the other library
facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined
with any other library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the
Library, and explaining where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided
under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the
Library is void, and will automatically terminate your rights under this License. However, parties who
have received copies, or rights, from you under this License will not have their licenses terminated so
long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants
you permission to modify or distribute the Library or its derivative works. These actions are prohibited
by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work
based on the Library), you indicate your acceptance of this License to do so, and all its terms and
conditions for copying, distributing or modifying the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically
receives a license from the original licensor to copy, distribute, link with or modify the Library subject to
these terms and conditions. You may not impose any further restrictions on the recipients' exercise of
the rights granted herein. You are not responsible for enforcing compliance by third parties with this
License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of
this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License
and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For
example, if a patent license would not permit royalty-free redistribution of the Library by all those who
receive copies directly or indirectly through you, then the only way you could satisfy both it and this
License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply, and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims
or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of
the free software distribution system which is implemented by public license practices. Many people
have made generous contributions to the wide range of software distributed through that system in
reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of
this License.
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who places the Library under this License may add
an explicit geographical distribution limitation excluding those countries, so that distribution is
permitted only in or among countries not thus excluded. In such case, this License incorporates the
limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public
License from time to time. Such new versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this
License which applies to it and "any later version", you have the option of following the terms and
conditions either of that version or of any later version published by the Free Software Foundation. If
the Library does not specify a license version number, you may choose any version ever published by the
Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions
are incompatible with these, write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO
THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE
DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS
PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY
(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER
SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
---------------------------------------
Three-clause BSD license
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of Internet Society, IETF or IETF Trust, nor the
names of specific contributors, may be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-------------------------------------------
2016 © Gibson Innovations Limited. All rights reserved. This
product has been manufactured by, and is sold under the
responsibility of Gibson Innovations Ltd., and Gibson Innovations
Ltd. is the warrantor in relation to this product. Philips and the
Philips Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used under license.
AW9000_10_UM_V3.0