Table of Contents
Philips BDP5012/F7 User Manual
Displayed below is the user manual for BDP5012/F7 by Philips which is a product in the DVD/Blu-Ray Players category. This manual has pages.
Related Manuals
Register your product and get support at BDP7200
BDP7200
Register your product and get support at
www.philips.com/welcome
BDP5010
STOP
ARRÊT
ALTO
1-866-309-0866 1-866-309-0866
1-866-309-0866
Register your product and get support at
www.philips.com/welcome BDP5012/F7 A
EN BLU-RAY DISC PLAYER
EN2
PRECAUTIONS
Safety Instructions
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modications to this equipment may
cause harmful interference unless the modications are expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized change or modication is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Disconnect the mains plug to shut o when nd trouble or not in use. The mains plug shall remain readily operable.
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference. Serial No.:
Model No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated“dangerous voltage”within the
product’s enclosure that may be of sucient magnitude
to constitute a risk of electric shock to persons.
The important note and rating are located on the rear or bottom of the cabinet.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacture’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specied by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
3
PRECAUTIONS
EN
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING:
Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, re, or the like.
LASER SAFETY
This apparatus employs a laser. Only a qualied service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specied herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and inter lock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
Products that have earned ENERGY STAR®are designed to protect the environment
through superior energy eciency.
To Avoid the Hazards of Electrical Shock and Fire
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your ngers or objects into the unit.
Location and Handling
Do not install the unit in direct sunlight, near strong magnetic elds, or in a place subject to dust or strong vibration.
Avoid a place with drastic temperature changes.
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
Consumers should note that not all high denition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard denition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) BD/DVD player, please contact our customer service center.
•
•
•
•
•
•
•
•
•
•
•
•
Introduction Connections Basic Setup Playback OthersFunction Setup
4
PRECAUTIONS
EN
Servicing
• Please refer to relevant topics on “TROUBLESHOOTING”
on page 47 before returning the product.
• If you need to call a customer service representative,
please know the model number and serial number of
your product before you call. This information is
displayed on the back of the product. Also, please take a
moment to identify the problem you are having, and be
prepared to explain this to the representative. If you
believe the representative will need to help you with
operations, please stay near the product. Our
representatives will be happy to assist you. For online
reference, please visit our web site at
http://www.philips.com/welcome
Cleaning the cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft, slightly damp cloth.
• Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Cleaning the disc lens
• If this unit still does not perform properly although you
refer to the relevant sections and to “TROUBLESHOOTING”
in this user manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center
for inspection and cleaning of the laser optical pickup
unit.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not
used.
• Note that discs with special shapes (heart-shaped discs,
octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to play such discs, as they may damage
the unit.
Manufactured under license
from Dolby Laboratories.
“Dolby” and the double-D
symbol are trademarks of
Dolby Laboratories.
Manufactured under license
under U.S. Patent #’s: 5,451,942;
5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and
worldwide patents issued &
pending. DTS is a registered
trademark and the DTS logos,
Symbol, DTS-HD and DTS-HD
Advanced Digital Out are
trademarks of DTS, Inc. © 1996-
2008 DTS, Inc. All Rights
Reserved.
HDMI, the HDMI Logo, and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI
Licensing LLC in the United
States and other countries.
Java and all other Java
trademarks and logos are
trademarks or registered
trademarks of Sun
Microsystems, Inc. in the
United States and/or other
countries.
Windows Media and the Windows
logo are trademarks or registered
trademarks of Microsoft
Corporation in the United States
and/or other countries.
DivX, DivX Certified, and associated
logos are trademarks of DivX, Inc.
and are used under license.
“BONUSVIEW” is trademark of
Blu-ray Disc Association.
“BD-LIVE” logo is trademark
of Blu-ray Disc Association.
“Blu-ray Disc” and are trademarks.
is a trademark of DVD Format/Logo Licensing
Corporation.
Maintenance
Supplied Accessories
User Manual
Remote Control
with Batteries
(AAAx2)
HDMI cable
(High Speed HDMI Cable)
User Manual Quick Start
Guide
Registration Card RCA Audio/
Video Cables
Trademark Information
5EN
CONTENTS
Introduction
Precautions ...................................................................2
Safety Instructions ....................................................................2
Contents ........................................................................5
Features ........................................................................6
Features ........................................................................................6
Product Info .................................................................................6
Symbols Used in this User Manual ......................................6
Functional Overview ....................................................7
Front Panel ...................................................................................7
Rear Panel .....................................................................................7
Remote Control ..........................................................................8
Front Panel Display ................................................................ 10
Guide to On-Screen Display ............................................... 11
Connections
Connections ................................................................12
Connection to the TV ............................................................ 12
Connection to an Audio System ....................................... 15
Network Connection with LAN .........................................17
Basic Setup
Before You Start .........................................................18
Finding the Viewing Channel on Your TV ..................... 18
Playback
Information on Playback ...........................................19
Information on Playback ...................................................... 19
Guide to File List .....................................................................21
How to Insert a Disc ............................................................... 21
Basic Playback ............................................................22
Playing Back a BD or a DVD ................................................ 22
Playing Back an Audio CD or a Disc with DivX®/
Windows Media™ Audio/JPEG Files ............................ 23
Reading the SD Memory Card ...........................................25
About DivX® and DivX® VOD .............................................. 25
Playing Back a DivX® with DivX® External Subtitle ..... 26
Using the Title / Disc Menu .................................................26
Special Playback .........................................................27
Fast Forward / Fast Reverse ................................................ 27
Slow Forward Playback ........................................................ 27
Step by Step Playback .......................................................... 27
Zoom ........................................................................................... 27
Repeat Playback ......................................................................28
A-B Repeat ................................................................................28
Slide Show ................................................................................. 28
PiP (BONUSVIEW) Setting .................................................... 28
Enjoying BD-Live Discs with Internet .............................. 29
Title/Chapter Search .............................................................. 29
Track Search .............................................................................30
Time Search .............................................................................. 30
Switching Subtitles ................................................................30
Switching Audio Soundtrack .............................................31
Switching Camera Angles ................................................... 31
Function Setup
List of settings ............................................................ 32
Setups ......................................................................... 38
TV Shape .....................................................................................38
HDMI Video Resolution .........................................................38
HDMI Audio ...............................................................................39
Digital Out .................................................................................40
Speaker Setup ..........................................................................41
Ratings Lock ..............................................................................41
EasyLink (HDMI CEC) ..............................................................42
Network Connection .............................................................43
Software Upgrade ...................................................................46
Reset to Factory Default .......................................................46
Others
Troubleshooting ........................................................ 47
Glossary ......................................................................49
Specifications ............................................................. 51
ONE (1) YEAR LIMITED WARRANTY .......................... 52
Introduction Connections Basic Setup Playback OthersFunction Setup
EN6
FEATURES
Watch movies in the highest picture quality available for your HDTV. The BDP5012 Blu-ray Disc player offers full high-definition
video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased sharpness
delivers a more true-to-life picture.
Blu-ray Disc
You can enjoy Blu-ray Disc which is capable of storing five
times more data than a conventional DVD.
BD Java
With some BDs which support Java applications, you can
enjoy the interactive functions such as games or interactive
menus.
Upscale DVD for enhanced picture quality
Your current DVD will look even better than before thanks to
video upscaling. Upscaling will increase the resolution of
standard definition DVD to high definition up to 1080p over
an HDMI connection. The picture will be less jagged and more
realistic for a near high definition experience.
Enjoy your content on different kinds of media
Full backwards compatibility with DVD, CD and SD Card
ensures that you can continue to enjoy your current audio-
video collection. Additionally, you can view JPEG digital
pictures or listen to Windows Media™ Audio music files.
Listen to the rich multi-channel surround sound
Multi-channel surround sound, which realizes real-to-life
sound and makes you feel that you are really there.
Intuitive user interface and remote control
The Philips logical user interface allows you to easily navigate
through your content and settings, so you can quickly find
what you are looking for.
Easy and simple connection to your HDTV via HDMI
Connect your BDP5012 to your HDTV with one single HDMI
(High Definition Multimedia Interface) cable. Philips
recommends HDMI1.3 (category 2) cable (also known as High
Speed HDMI cable) for better compatibility. The high definition
video output signal will be transferred to your HDTV without
conversion to analog signals, so you will get an excellent
picture and sound quality, completely free from noise.
Thanks to other multiple outputs, you can also easily connect
to your home theater system or amplifier.
About EasyLink (HDMI CEC) (Consumer Electronics
Control)
EasyLink (HDMI CEC) allows you to operate the linked
functions of this player with Philips brand TV with EasyLink
feature.
Philips does not guarantee 100 % interoperability with other
brands of HDMI CEC compliant devices.
PiP (BONUSVIEW)
Some BD-videos have the PiP function which enables you to
display the secondary video in the primary video. You can call
up the secondary video by pressing [BONUSVIEW (PiP)]
whenever the scene contains the secondary video.
BD-Live
BD-Live (BD-ROM version 2 Profile 2.0) that allows interactive
functions to be used when this unit is connected to the
Internet in addition to the BONUSVIEW function. The various
functions differ depending on the disc.
Pop-up menu
Some BD-videos have a pop-up menu which is a navigation
menu that can be called up and be operated on the screen
without interrupting the playback. You can call up the pop-up
menu by pressing [DISC MENU / POP-UP MENU]. Contents in
the pop-up menu vary depending on the disc.
HDMI Deep Color
Deep Color reduces the posterization effect of the playback
image. Refer to “HDMI Deep Color” in the “LIST OF SETTINGS”
on page 33.
HDMI 1080p/24 output (BD only)
This unit is equipped with the feature which can provide the
smooth movement in the playback of film originated material with
the frame rate of 24 frames per second with progressive. (Available
only when the display device is connected by an HDMI cable.)
Refer to “HDMI 1080p/24” in the
“LIST OF SETTINGS” on
page 33
.
Playing back the contents in SD Memory Card
You can play back WMA/JPEGs stored in an SD Memory Card. You
can store picture-in-picture commentary, subtitles or other extras
for BD-ROM Ver. 2 (Profile 2.0/ Profile 1.1) files in an SD Memory
Card and play back with the BD-video.
“Product Info” screen provides you with the information
on this unit’s hardware and software version information.
You can also download the latest firm ware from the web
site which is displayed in the “Product Info” screen, and
update the firm ware by yourself.
To access “Product Info”, select “Product Info” in the home
menu.
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Features
Product Info
Symbols Used in this User Manual
Symbol Description
Description refers to BD-video
Description refers to DVD-video
Description refers to audio CD/DTS-CD
Description refers to DivX® file
Description refers to DVD-RW/-R, CD-RW/-R
and SD Card with
Windows Media™ Audio
files
Description refers to DVD-RW/-R, CD-RW/-R
and SD Card with JPEG files
7EN
FUNCTIONAL OVERVIEW
* The unit can also be turned on by pressing these buttons.
1. Q(STANDBY-ON) button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord).
2. Disc tray
• Place a disc when opening the disc tray.
3. A(OPEN/CLOSE) button*
• Press to open or close the disc tray.
4. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
5. Display
• Refer to “Front Panel Display” on page 10.
6. C(STOP) button
• Press to stop playback.
7. F(PAUSE) button
• Press to pause playback.
8. B(PLAY) button*
• Press to start or resume playback.
9. SD card slot
• Insert an SD Memory Card and play back the
contents in it.
1. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
2. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video
inputs with a component video cable.
3. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA video cable.
4. 5.1ch AUDIO OUT jacks
• Use to connect to an AV receiver / amplifier with
5.1ch audio cable.
5. LAN Terminal
• Use to connect a telecommunications equipment
with LAN cable.
6. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
7. AUDIO OUT jacks
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA audio cable.
8. DIGITAL OUT (OPTICAL/COAXIAL) jacks
• Use to connect an AV receiver / amplifier, Dolby
Digital/DTS decoder or other device with a digital
audio optical/coaxial input jack with a digital audio
optical/coaxial cable.
Front Panel
1 2 3* 5 6 7 8*4 9
Rear Panel
HDMI OUTLAN
VIDEO
OUT
5.1ch AUDIO OUT
AUDIO OUT
FL SL C
L
RFR SR SW
DIGITAL OUT
COAXIAL
OPTICAL
PCM/ BITSTREAM
COMPONENT
VIDEO OUT
P
R
/C
R
P
B
/C
B
Y
654
78
32
1
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
Introduction Connections Basic Setup Playback OthersFunction Setup
8
FUNCTIONAL OVERVIEW
EN
* The unit can also be turned on by pressing these buttons.
1. STANDBY-ON Q button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord)
2. BONUSVIEW (PiP) button
• Press to switch picture in picture feature on/off
(only applicable to BD-video which supports the PiP
(BONUSVIEW) function).
3. ZOOM button
• Press to enlarge the picture on the screen.
4. RED/GREEN/BLUE/YELLOW button
• Press to activate short cut keys on some BD-video
function.
• When file list / setup list is shown, press to switch
between pages.
5. HOME button
• Press to display the home menu.
6. DISC MENU / POP-UP MENU button
BD:
• Press to display the pop-up menu.
DVD:
• Press to display the disc menu.
7. Cursor K/L/s/B buttons
• Press to select items or settings.
8. OK button
• Press to confirm or select menu items.
9. BACK U button
• Press to return to the previously displayed menu or
screen function.
10. PLAY B button*
• Press to start playback or resume playback.
11. PREV S button
• During playback, press once to return to the
beginning of the current title, chapter, track or file.
• During the JPEG playback, press to return to the
previous file.
• During playback, press twice to return to the
previous title, chapter, track or file.
12. REW E button
• During playback, press to fast reverse the playback.
13. STOP C button
• Press to stop playback.
14. VOL ⴐ / ⴑ button
• Press to adjust the TV volume (only applicable to
the PHILIPS brand TV).
15. OPEN/CLOSE A button*
• Press to open or close the disc tray.
16. Number buttons
• Press to select a chapter during playback.
• Press to enter values in the input field.
17. SUBTITLE button
• Press to select subtitles on a disc.
18. ANGLE button
• Press to select camera angles on a disc.
• Press to rotate a picture (JPEG).
19. HDMI button
• Press to set the HDMI output mode.
20. AUDIO button
• Press to select the audio channel (such as audio
languages) on a disc.
21. TV CH ⴐ / ⴑ buttons
• Press to change the channel up and down (only
applicable to the PHILIPS brand TV).
22. MUTE d button
• Press to mute the TV volume (only applicable to the
PHILIPS brand TV).
23. FFW D button
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward
the playback.
24. NEXT T button
• During playback, press to skip to the next chapter,
track or file.
25. PAUSE F button
• Press to pause playback.
• When playback is in pause mode, press repeatedly
to forward the playback step by step.
26. INFO button
• Press to display the information display.
27. TOP MENU button
BD:
• Press to display the top menu.
DVD:
• Press to display the title menu.
28. REPEAT A-B button
• Press to play back a defined section between point
A and B repeatedly.
29. REPEAT button
• Press to toggle between various repeat modes.
Remote Control
1
2
5
6
7
9
11
10*
12
13
14
16
17
18
4
3
8
15*
29
28
27
26
24
21
20
19
23
22
25
9
FUNCTIONAL OVERVIEW
EN
Install the batteries (AAAx2) matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight:
approx. 23 feet (7 m)
- Either side of the center:
approx. 16 feet (5 m) within 30°
-Above:
approx. 16 feet (5 m) within 15°
-Below:
approx. 10 feet (3 m) within 30°
Installing the Batteries in the Remote Control
1) Open the cover.
2) Insert batteries.
Make sure to match + and - on the batteries to the
marks indicated in the battery compartment.
3) Close the cover.
Note
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
Using a Remote Control
30˚ 30˚
16 feet (5 m) 23 feet (7 m) 16 feet (5 m)
Introduction Connections Basic Setup Playback OthersFunction Setup
10
FUNCTIONAL OVERVIEW
EN
1. Displays playback status icon. Refer to the table below.
2. Displays various kinds of information such as title number, elapsed playing time, repeat type, menu type, etc.
e.g.;
Front Panel Display
1 2
* Brightness of the display can be adjusted. Refer to “Front Panel Brightness” in “LIST OF SETTINGS” on page 35.
Playback status icon Mode
Disc SD Memory Card
Playback is in progress
Stop mode
Pause mode
Fast forward mode
Fast reverse mode
Slow forward mode
Loading a media
Appears while repeat function is set
Appears while displaying the home
menu
Title is being played back.
Indicating the current title number and the elapsed time.
Current chapter is in chapter repeat mode.
Loading a disc.
Dolby Digital audio is being played back.
DTS audio is being played back.
11
FUNCTIONAL OVERVIEW
EN
When you turn on the unit, home menu will appear
automatically. Otherwise, press [HOME ].
1. Directory
Displays the current hierarchy.
2. Menus
3. Options
Displays options for the high-lighted item on the left
whenever available.
Guide to On-Screen Display
Home Menu
“Disc Tray” : To access the track/file list or media
filter screen
“SD Card” : To access the file list or media filter
screen
“Settings” : To access the settings menus
“Product Info” : To access the product information
Menu Screen
Blu-ray Disc Player
Disc Tray
SD Card
Settings
Product Info
BD-Player
Settings
Quick Setup Player Menu
TV Shape
HDMI Video Resolution
Advanced Setup
Factory Default
23
1
Introduction Connections Basic Setup Playback OthersFunction Setup
EN12
CONNECTIONS
(Supports up to 1080i(*1), 1080p(*2), 1080p/24 resolution.)
(*1) 1080i : Outputs the video data with frame rate of 30 frames per second.
(*2) 1080p : Outputs the video data with frame rate of 60 frames per second.
(Supports up to 1080i resolution.)
(Supports only 480i resolution.)
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted
due to the copy right protection system.
Connection to the TV
1Choose the appropriate connection, then proceed to the corresponding
instruction (A, B or C) on the next page.
Best
HDMI IN
A
Video
Audio
HDMI cable
Your TV
No analog audio connection required.
Go To
High
Definition
TV
Supplied cables used in this connection are as follows:
• HDMI cable (High Speed HDMI Cable) x 1
Better
B
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
AUDIO IN
R
L
+
Video
Audio
RCA component video cable Your TV
Go To
RCA audio cable
High
Definition
TV
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Basic
C
AUDIO IN
R
L
VIDEO IN
+
Video
Audio
RCA video cable Your TV
Go To
RCA audio cable
Standard
Definition
TV
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x1
• RCA video cable x1
13
CONNECTIONS
EN
HDMI Video / Audio Connection
Component Video + Standard Audio Connection
Standard Video + Standard Audio Connection
2Connect the cables by following the descriptions below.
HDMI OUTLAN
VIDEO
OUT
5.1ch AUDIO OUT
AUDIO OUT
FL SL C
L
RFR SR SW
DIGITAL OUT
COAXIAL
OPTICAL
PCM/BITSTREAM
COMPONENT
VIDEO OUT
PR/CR
PB/CB
Y
A
HDMI IN
($-)/54
HDMI cable
Your TV
HDMI OUTLAN
VIDEO
OUT
5.1ch AUDIO OUT
AUDIO OUT
FL SL C
L
RFR SR SW
DIGITAL OUT
COAXIAL
OPTICAL
PCM/BITSTREAM
COMPONENT
VIDEO OUT
PR/CR
PB/CB
Y
B
!5$)//54
,
2
2
#/-0/.%.4
0
"
#
"
9
0
2
#
2
6)$%//54
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
AUDIO IN
R
L
RCA component video cable
Your TV
RCA audio
cable
HDMI OUTLAN
VIDEO
OUT
5.1ch AUDIO OUT
AUDIO OUT
FL SL C
L
RFR SR SW
DIGITAL OUT
COAXIAL
OPTICAL
PCM/BITSTREAM
COMPONENT
VIDEO OUT
PR/CR
PB/CB
Y
C
6)$%/
/54
!5$)//54
,
2
2
AUDIO IN
R
L
VIDEO IN
Your TV
RCA video cable
RCA audio cable
Introduction Connections Basic Setup Playback OthersFunction Setup
14
CONNECTIONS
EN
Press [HDMI] to change the resolution of the video signal being output from the HDMI OUT. The video resolution
changes as follows every time [HDMI] is pressed. Or change the setting in the “HDMI Video Resolution” in the settings
menu.
HDMI Mode and Actual Output Signals
Font Panel Display HDMI Video Resolution
480 Progressive
Press [HDMI]
720 Progressive
Press [HDMI]
1080 Interlaced
Press [HDMI]
1080 Progressive
Press [HDMI]
Copyright protection system
To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that both the
player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high-
bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption
and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of
your display device (or AV receiver / amplifier) for more information.
Note
• When using HDCP-incompatible display device, the picture will not be viewed properly.
• The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length)
may be limited by the device that is connected.
• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output jack.
• When this unit’s HDMI jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMI-
DVI converter cable, the signals are output in digital RGB.
•Pressing [HDMI] does not work when HDMI cable is not connected, or when no video signal is being output from
the HDMI OUT jack.
•Pressing [HDMI] does not work during the playback of a BD-video or while displaying the settings menu.
• When you make a selection, the TV monitor temporarily goes blank and then comes back again. If it does not, press
[HDMI] repeatedly to change the resolution or press and hold [B(PLAY)] on the front panel for 5 seconds to
change the setting back to its default.
15
CONNECTIONS
EN
• When you change the connections, all devices should be turned off.
• Refer to the manual accompanying external devices for more information.
Audio Output from Analog Out (2ch Jacks)
*1) Only the independent substream is decoded.
*2) Only the Dolby Digital substream is decoded.
*3) Only the core substream is decoded.
Connection to an Audio System
2-Channel Analog Audio Connection Digital Audio Connection
LAN
SL C
SR SW
DIGITAL OUT
AUDIO IN
LR
COAXIAL
DIGITAL AUDIO INPUT
OPTICAL
DIGITAL AUDIO INPUT
VIDEO
OUT
AUDIO OUT
L
R
R
DIGITAL OUT
PCM/BITSTREAM
OPTICAL COAXIAL
audio
AUDIO OUT
analog audio input jacks
RCA audio
cable
stereo system
this unit
digital audio optical/
coaxial input jack
digital audio
RCA cable
digital audio
optical cable
DIGITAL OUT (OPTICAL/COAXIAL)
or
AV receiver/amplifier
To set up “Digital Out”, refer to page 40.
Optical cable
• Optical cable may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diameter of 6
inches (15 cm) or more when storing them.
• Use a cable which is 9.8 feet (3 m) or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.
“Blu-ray Disc Audio” A “Primary Audio Only” “Mix Audio Output”
Media
ª
Audio Source
ª
BD-video
Dolby Digital DownMix 2ch PCM DownMix 2ch PCM
Dolby Digital Plus DownMix 2ch PCM*1 DownMix 2ch PCM*1
Dolby TrueHD DownMix 2ch PCM*2 DownMix 2ch PCM*2
DTS DownMix 2ch PCM DownMix 2ch PCM
DTS-HD DownMix 2ch PCM*3 DownMix 2ch PCM*3
LPCM DownMix 2ch PCM DownMix 2ch PCM
DVD-video
Dolby Digital DownMix 2ch PCM
DTS DownMix 2ch PCM
LPCM 2ch PCM
Audio CD/
Windows Media™ Audio PCM 2ch PCM
DivX® Dolby Digital DownMix 2ch PCM
PCM 2ch PCM
DTS-CD DTS DownMix 2ch PCM
Introduction Connections Basic Setup Playback OthersFunction Setup
16
CONNECTIONS
EN
To set up the speakers, refer to “Analog Audio” on page 35.
Audio Output from Analog Out (5.1ch Jacks)
*1) Only the independent substream is decoded.
*2) Only the Dolby Digital substream is decoded.
*3) Only the core substream is decoded.
To set up “HDMI Audio” refer to page 39.
Multi-Channel Analog Audio Connection
“Blu-ray Disc Audio” A “Primary Audio Only” “Mix Audio Output”
Media
ª
Audio Source
ª
BD-video
Dolby Digital Multi PCM Multi PCM
Dolby Digital Plus Multi PCM*1 Multi PCM*1
Dolby TrueHD Multi PCM*2 Multi PCM*2
DTS Multi PCM Multi PCM
DTS-HD Multi PCM*3 Multi PCM*3
LPCM DownMix 5.1ch PCM DownMix 5.1ch PCM
DVD-video
Dolby Digital Multi PCM
DTS Multi PCM
LPCM 2ch PCM
Audio CD/
Windows Media™ Audio PCM 2ch PCM
DivX® Dolby Digital Multi PCM
PCM 2ch PCM
DTS-CD DTS Multi PCM
VIDEO
OUT
5.1ch AUDIO OUT
AUDI O OUT
FL
L
RFR
DIGITAL OUT
COAXIAL
OPTICAL
PCM/ BITSTREAM
COMPONENT
VIDEO OUT
P
R
/C
R
P
B
/C
B
Y
SL C
SR SW
HDMI OUTLAN
5.1ch AUDIO OUT
FL SL C
FR SR SW
5.1ch
audio cable
AV receiver / amplifier with multi-channel audio input jacks.
audio
this unit
HDMI Audio Connection
HDMI OUTLAN
HDMI IN
LAN
HDMI OUT
audio this unit
HDMI cable
AV receiver / amplifier with an HDMI input jack
Supplied cables used in these connections are as follows:
• RCA audio cable (L/R) x 1
• HDMI cable (High Speed HDMI Cable) x 1
Please purchase the rest of the necessary cables at your local store.
17
CONNECTIONS
EN
• You can use a disc which offers BD-Live function by connecting the unit to the Internet.
(For BD-Live information, please refer to page 29)
Network Connection with LAN
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
LAN
LAN WAN LAN
12345
HDMI OUTLAN
VIDEO
OUT
5.1ch AUDIO OUT
AUDIO OUT
FL SL C
L
RFR SR SW
DIGITAL OUT
COAXIAL
OPTICAL
PCM/ BITSTREAM
COMPONENT
VIDEO OUT
P
R
/C
R
P
B
/C
B
Y
this unit
Internet
LAN cable
LAN cable
Hub or broadband router
Telecommunications
equipment (modem, etc.)
Note
• After connecting to the Internet, set up necessary network settings.
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a
broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port,
use a hub.
• For a broadband router, use a router which supports 10BASE-T/100BASE-TX.
• Do not connect your PC directly to the LAN terminal of this unit.
• For the network setup, refer to “Network Connection” on page 43.
Introduction Connections Basic Setup Playback OthersFunction Setup
EN18
BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
Finding the Viewing Channel on Your TV
1After you have made all the necessary
connections, press [STANDBY-ON Q] to
turn on the unit.
2Turn on your TV.
3Press the button on the TV’s remote
control that accesses the external input
channel. It may be labeled “SOURCE”,
“AV” or “SELECT” (refer to your TV’s
user manual). Or press “2” on the TV’s
remote control, then press channel
down button repeatedly until you see
the PHILIPS splash screen.
This is the correct viewing channel (external
input channel).
• If a certain amount of time has passed since
you turned on the unit, you may see the home
menu instead of the PHILIPS splash screen.
Home menu:
Blu-ray Disc Player
Disc Tray
SD Card
Settings
Product Info
19EN
INFORMATION ON PLAYBACK
Before you start playing back a disc, read the following information.
This unit is compatible to play back the following discs / files.
To play back a disc / file, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos. Other disc types are not guaranteed to
play back.
(*) Due to the intentional progression of the Blu-ray Disc
format by its standard setting authority, the company
cannot guarantee or warrant the playability of future
extensions of the Blu-ray Disc format with this product.
• Official DivX® Certified product; Plays all versions of DivX®
video (including DivX® 6) with standard playback of
DivX® media files.
• Discs containing the DivX® files with the DivX® GMC
(Global Motion Compensation) playback feature, which
is DivX® supplemental function, cannot be played back
on this unit.
• This unit cannot play back the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
Information on Playback
Playable Discs and Files
Playable discs Logos
Blu-ray Disc
- BD-video
- BD-RE* (ver. 2.1)
(Recorded in BDMV format)
- BD-R* (ver. 1.1/1.2/1.3)
(Recorded in BDMV format)
(Unclosed discs may not be played
back.)
DVD-video
DVD-RW
(finalized video mode discs only)
DVD-R
(finalized video mode discs only)
CD-DA (audio CD)
CD-RW
CD-R
DTS-CD -
Playable files Media
DivX® DVD-RW/-R
CD-RW/-R
Windows Media™ Audio DVD-RW/-R
CD-RW/-R
SD Memory Card (including SDHC)
miniSD Card
microSD Card
JPEG
Readable cards Playable files / data
SD Memory Card (8 MB - 2 GB) WMA, JPEG, picture-in-
picture commentary,
subtitles or other extras for
BD-ROM Ver. 2 (Profile 2.0/
Profile 1.1)
SDHC Memory Card (4 GB - 8 GB)
miniSD Card (8 MB - 2 GB)
microSD Card (8 MB - 2 GB)
Note for SD Memory Cards
• This unit supports SD Memory Card with FAT12/
FAT16 file system, and SDHC Memory Card with
FAT32 file system.
• This unit does not support NTFS file system.
• This unit may not read the SD Memory Cards
formatted on a computer. If that is the case, please
reformat the SD Memory Cards in this unit and try
again.
• This unit does not support miniSDHC and microSDHC
Memory Card.
• For miniSD Card and microSD Card, the adapter is
necessary.
• Portions of this product are protected under
copyright law and are provided under license by
ARIS / SOLANA / 4C.
• Please keep the SD Memory Cards in their cases when
you are not using them.
• Do not try to open or modify the card.
• Do not touch the terminal surface with your fingers or
any metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit recognizes up to 8 characters of file name in
the SD Memory Card. Characters after 8th will not be
displayed.
miniSD Card
adapter
miniSD Card microSD
Card
microSD Card
adapter
Introduction Connections Basic Setup Playback OthersFunction Setup
20
INFORMATION ON PLAYBACK
EN
The following discs will not be played back in this unit.
• BD-RE (ver.1.0)
• BD-RE (ver.2.1) (Recorded in BDAV format)
• BD-R (ver.1.1/1.2/1.3) (Recorded in BDAV format)
• Super Audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density Super Audio CD
layer cannot be heard.
• Playability of dual discs are not guaranteed.
BD-video and DVD-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily in the United
States and Canada).
This unit employs NTSC color system, so the disc you play
back must be recorded in the NTSC system. You cannot
play back the disc recorded in other color systems.
The contents of disc are generally divided into sections or
folders (groups of titles/files) as shown below.
[ ] : group (folder) icon
[ ] : group (folder) return icon
[ ] : video file icon
[ ] : music file icon
- “Folders” refers to the groups of files.
- “Tracks” refers to the contents recorded on the audio
CD.
- “Files” refers to the contents on a disc which are
recorded in DivX®, Windows Media™ Audio, or JPEG file
format.
Unplayable Discs and Files
• CD-ROM • CD-I (compact disc-interactive)
•DVD-RAM •VSD (video single disc)
•DVD-audio •video CD
• HD DVD • SVCD
• unfinalized disc
Color Systems
Region Codes
This unit has been designed to play back
BD-video with region “A” and DVD-video
with region “1” or “ALL”. You cannot play
back BD-video or DVD-video that are
labeled for other regions. Look for the
symbols on the right on your BD-video or
DVD-video.
If these region symbols do not appear on
your BD-video or DVD-video, you cannot
play back the disc in this unit. The letter or
number inside the globe refers to region
of the world. A BD-video or DVD-video
labeled for a specific region can only be
played back in the unit with the same
region code.
BD-video
DVD-video
Hint for Disc Playback
Description for Icons
Note
• Unrecognizable characters will be replaced by “”.
• For DVD and SD Card, this unit can recognize up to
999 groups (folders), and 9999 tracks / files.
• For CD, this unit can recognize up to 255 groups
(folders), and 999 tracks / files.
BD-video, DVD-video
title 1 title 2
chapter 1 chapter 2 chapter 2chapter 1 chapter 3
Audio CD
track 1 track 2 track 3 track 4 track 5
DivX®, Windows Media™ Audio, JPEG
folder (group) 1 folder (group) 2
file 1 file 2 file 1 file 2 file 3
21
INFORMATION ON PLAYBACK
EN
1) Total track number
2) Repeat status
3) Image
4) Elapsed playing time of the current track
5) Playing track number
6) Total time of the current track
7) Track list
8) Playback status
1) Number of contents in the current hierarchy
2) Repeat status (Music mode only)
3) Image
4) Elapsed playing time of the current track
5) Current file name
6) Group (folder)/File list
7) Playback status
8) Root folder
9) Directory
1) Directory
2) Number of contents in the current hierarchy
3) Current file name
4) Group (folder)/File list (thumbnails)
5) Root folder
1) Press [OPEN/CLOSE A] to open the disc tray.
2) Place the disc on the disc tray with its label side
facing up.
* Make sure the disc is compatible with this unit. (Refer to page 19 for the
list of compatible discs.)
3) Press [OPEN/CLOSE A] to close the disc tray.
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray.
Remove the disc.
Press [OPEN/CLOSE A] to close the disc tray.
Guide to File List
Audio CD Track List
Video/Music Mode File List
00 : 03 : 40
14
001
002
003
004
005
006
007
008
001
00 : 00 : 39
BD-Player
Music
Track
Track
Track
Track
Track
Track
Track
Track
Page Down
Track
6
5
4
3
1
8
7
2
abcdefg001
abcdefg003
abcdefg002
abcdefg003
abcdefg004
abcdefg005
abcdefg006
abcdefg007
..
9
00:00:13
BD-Player Disc Tray
Music
Media Filter Page Down
|
192
3
4
5
6
7
8
Picture Mode File List
How to Insert a Disc
It may take a while to load the disc.
..
24
BD-Player Disc Tray
Pictures
Media Filter Page Down
|
12
4
5
3
Align the disc to the
disc tray guide.
Introduction Connections Basic Setup Playback OthersFunction Setup
EN22
BASIC PLAYBACK
Playing Back a BD or a DVD
1Insert a disc (refer to page 21 on
how to insert a disc).
2Playback may start automatically.
If not, press [PLAY B].
Some discs may show a title or a disc menu. In
this case, refer to “Using the Title / Disc Menu”
on page 26.
To pause playback:
Press [PAUSE F].
To return to the normal playback:
Press [PLAY B].
To stop playback:
Press [STOP C].
Playback will be in Resume-On-Stop mode,
and the home menu will appear.
<Resume-On-Stop mode>
When you press [PLAY B] next time, the
playback will start from the point where it has
been stopped.
Note
• Playback will also stop and the home menu will
appear when you press [HOME ].
• For BD Java application, the Resume-On-Stop is not
available.
• If you press [OK] instead of [PLAY B], playback can
be started from the beginning of the disc even if it
was in the Resume-On-Stop mode.
• You can also start from the beginning of the disc if
you press [PREV S] while the resume message is
displayed.
• The resume message can be removed by pressing
[BACK U].
• Resume-On-Stop mode remains in effect even after
power is turned off, but will be cancelled once the
disc is ejected.
23
BASIC PLAYBACK
EN
•Use [K/L] to move the highlight up and down in the
list.
• To access the files in a group (folder), highlight the
desired group (folder), then press [OK].
•Press [s], or highlight [ ], then press [OK] to go back
to the previous hierarchy.
•Press [s] to go back to the previous screen.
•Press [BLUE] or [YELLOW] to change the page of the list.
•Press [RED] to go back to the media filter screen.
•Press [HOME ] to go back to the home menu.
Recommended specifications:
<DivX®>
Official DivX® Certified product
<Windows Media™ Audio >
<JPEG>
Resolution
Folder / File number limitations:
<DVD and SD Card>
• 999 folders (groups) and 9,999 files.
<CD>
• 255 folders (groups) and 999 tracks / files.
Playing Back an Audio CD or a Disc with DivX®/Windows Media™ Audio/JPEG Files
How to Navigate through the Track/File List
• Playable codec of AVI files : DivX® 3.x, DivX® 4.x, DivX®
5.x, DivX® 6.x
• Maximum size of a video : 720 x 480 @30 fps
720 x 576 @25 fps
• Sampling frequency of
audio
: 8 kHz - 48 kHz
• Audio type : MPEG1 audio layer 2, Dolby
Digital
• Sampling frequency : 32 kHz, 44.1 kHz or 48 kHz
• Constant bit rate : 48 kbps - 192 kbps
• Upper limit :
:
2,560 x 1,900 dots
(sub sampling is 4:4:4)
5,120 x 3,840 dots
(sub sampling is up to
4:2:2)
• Lower limit : 32 x 32 dots
• Maximum file size of a
picture
:5 MB
Introduction Connections Basic Setup Playback OthersFunction Setup
24
BASIC PLAYBACK
EN
1Insert a disc (refer to page 21 on
how to insert a disc).
• Home menu appears automatically.
2With “Disc Tray” selected, press
[OK]. Media filter screen will
appear.
• For audio CD, skip to step 4.
3Select the type of the file you want
to play back in the media filter
screen. Then press [OK] to display
the file list.
Blu-ray Disc Player
Disc Tray
SD Card
Settings
Product Info
“Video” : If you want to play back video
files such as DivX® video files,
select “Video”.
“Music” : If you want to play back music
files such as Windows Media™
Audio, select “Music”.
“Pictures” : If you want to play back the still
images such as JPEG pictures,
select “Pictures”.
BD-Player
Disc Tray
Video
Music
Pictures
4Select a group (folder) or track/file
you want to play back. Then press
[PLAY B] or [OK] to start playback.
Refer to “How to Navigate through the Track/
File List” on page 23.
To skip to the next track/file:
Press [NEXT T].
To skip to the previous track/file:
Press [PREV S].
To pause playback:
Press [PAUSE F].
To return to the normal playback:
Press [PLAY B].
To stop playback:
Press [STOP C].
Playback will be in Resume-On-Stop mode.
<Resume-On-Stop mode for
audio CD/DivX®
>
Playback will start from the point where it is
stopped next time you press [PLAY B].
If you press [OK] instead of [PLAY B],
playback will start from the beginning of the
track instead of resuming from the stop point.
<Resume-On-Stop mode for Windows
Media™ Audio/JPEG>
Playback will start from the beginning of the
current file next time you press [PLAY B] or
[OK].
To go back to the media filter screen :
Press [RED] in Resume-On-Stop mode.
Note
• Playback will also stop and the home menu will
appear when you press [HOME ].
25
BASIC PLAYBACK
EN
You can play back the WMA/JPEG files in an SD Memory
Card.
With the SD Memory Card, you can also enjoy the
following functions.
- Special additional contents for BD-ROM Profile 1 ver.1.1.
(For more information about the special additional
contents, refer to the instruction book that came with
the disc.)
- BD-Live function (BD-ROM ver. 2 Profile 2.0). (For more
information about BD-Live, refer to page 29.)
Hint for the purchased or rented official DivX®
Certified product
• When you purchase or rent a DivX® file through the
official site of DivX® video which is called DivX® Video
On-Demand (VOD) services, a registration code is
required every time you get the new file from the DivX®
VOD services. Refer to “DivX® VOD” in “LIST OF SETTINGS”
on page 36.
“This rental has c views left. Do you want to use one of
your c views now?”
Some DivX® VOD files are restricted with the limited
playable times. You cannot play them back beyond the
limit.
“This player is not authorized to play this video.”
You cannot play back the DivX® VOD files obtained with
different registration codes on this unit.
“This rental is expired.”
You cannot play back the DivX® VOD files with the expired
rental period.
“This player does not support this video format.”
You cannot play back the DivX® files whose image size
exceeds 720 x 480 @ 30 fps or 720 x 576 @ 25 fps.
Reading the SD Memory Card
1Insert an SD Card and then press
[HOME ].
Home menu appears.
2With “SD Card” selected, press
[OK]. Media filter screen will
appear.
3Select the type of the file you want
to play back in the media filter
screen. Then press [OK] to display
the file list.
4Follow step 4 in “Playing Back an
Audio CD or a Disc with DivX®/
Windows Media™ Audio/JPEG
Files” on page 23.
To remove the SD Memory Card:
In stop mode, gently push in the SD Memory
Card, then pull it out slowly.
Note
• In the “SD Card” mode, the resume information will
be cleared when;
-[STOP C] is pressed while in the Resume-On-Stop
mode.
-the SD Memory Card is removed.
-the unit is turned into the standby mode.
• Do not remove the SD Memory Card or turn the unit
to the standby mode while the contents of the card
are in playback. It may result in malfunction or loss of
the card’s data.
• Do not delete the folders or files in the SD Memory
Card with your computer. This unit may not read the
SD Memory Cards formatted on a computer.
SD Memory Card
SD card
About DivX® and DivX® VOD
Possible Errors
Note
• A file with an extension of “.avi” and “.DivX” is called
as a DivX® file. All files with the “.avi” extension are
recognized as MPEG4.
• For CD-RW/-R, maximum of 255 group (folder) or 999
files may be recognized.
• For DVD-RW/-R, maximum of 999 group (folder) or
9,999 files may be recognized.
• The 10th and deeper hierarchies cannot be
displayed.
• Unrecognizable characters will be replaced with “”.
• When playing back the files recorded in high bit
rates, the images can be interrupted in some
occasions.
• Although DivX® logo has been obtained for this unit,
it may not be able to play back some data,
depending on the characteristics, bit rates, or audio
format settings, etc.
• A DivX® file whose file size exceeds 2 GB cannot be
played back.
• If a large-sized DivX® file is selected, it may take a
while to start the playback (over 20 seconds
sometimes).
• If DivX® files written on a CD-RW/-R cannot be played
back, rewrite them on a DVD-RW/-R and try to play
back.
• Multi-session burn DivX® DVD cannot be played back
on this unit.
• For more information for DivX®, please visit
http://www.divx.com.
Introduction Connections Basic Setup Playback OthersFunction Setup
26
BASIC PLAYBACK
EN
Subtitles created by the user can be displayed during
DivX® playback.
1) Follow steps 1 to 3 in “Playing Back an Audio CD or a
Disc with DivX®/Windows Media™ Audio/JPEG Files”
on page 23.
2) Highlight a file you want to play back, then press
[GREEN].
Subtitle list will appear.
• “Subtitle” appears next to “Green” icon only when DivX®
subtitle is available for the selected file.
•If you press [PLAY B] or [OK] instead of [GREEN],
playback without subtitle will start.
3) Highlight the desired subtitle file, then press
[PLAY B] or [OK].
Playback of the DivX® file with DivX® subtitle will start.
Some BD-video or DVD-video may contain a title menu
which describes the contents of the disc, or a disc menu
which guides you through the available functions in the
disc.
With such discs, a title menu or a disc menu may appear
automatically when you insert the disc. Otherwise, press
[TOP MENU] or [DISC MENU / POP-UP MENU] to call up
the menu. Refer to the disc’s manual on how to navigate
through the menu.
Playing Back a DivX® with DivX®
External Subtitle
Note
• To utilize this function, the following conditions
must meet.
-Playback file and the subtitle file must have the same
name.
-Playback file and the subtitle file must locate in the
same folder.
-Only the subtitle files with the following extensions
are supported; .smi (.SMI), .srt (.SRT), .sub (.SUB), .ass
(.ASS), .ssa (.SSA), .txt (.TXT). (.sub (.SUB) and .txt
(.TXT) may not be recognized.)
-The subtitles that exceeds the playback time of the
DivX® file will not be displayed.
• If the DivX® subtitle file contains more than one
subtitle language, you can toggle those by pressing
[SUBTITLE] repeatedly.
3dolby.avi
SRT
SUB
SMI
Subtitle List
Off
Cancel
Using the Title / Disc Menu
Note
• Menus vary among discs. Refer to the information
accompanying the disc for details.
•[TOP MENU] or [DISC MENU / POP-UP MENU] may
not work with some discs.
27EN
SPECIAL PLAYBACK
1) During playback, press [FFW D] repeatedly for fast
forward.
During playback, press [REW E] repeatedly for
fast reverse.
Every time you press [FFW D] or [REW E], the
playback speed will change.
• For BD and DVD, speed changes in 5 different levels.
• For audio CD, DivX®, and Windows Media™ Audio,
speed changes in 3 different levels.
2) Press [PLAY B] to return to the normal playback.
1) During playback, press [PAUSE F]. Then press
[FFW D].
Every time you press [FFW D], the playback speed
changes in 3 different levels.
2) Press [PLAY B] to return to the normal playback.
1) In pause mode, press [PAUSE F] repeatedly.
Every time you press [PAUSE F], playback will advance
one step at a time.
2) Press [PLAY B] to return to the normal playback.
During playback, you can zoom up the picture.
.
1) During playback, press [ZOOM] repeatedly.
Every time you press [ZOOM], zoom factor will change.
e.g.; DVD-video
2) You can move over the zoomed picture using
[K/L/s/B].
The gray box with an inner blue box displayed at the
right bottom corner of the zoomed image is the
position guide. The inner blue box indicates the
zoomed area. (Not available for the JPEG playback.)
Fast Forward / Fast Reverse
Note
• For some DivX® files, fast forward/fast reverse may
not function.
Slow Forward Playback
Note
• Only slow forward is available.
• For some DivX® files, slow forward may not function.
Step by Step Playback
Note
• Only step by step forward is available.
Zoom
Note
• For JPEG files, slide show of the zoomed picture is
not possible.
• For some DivX® files, zoom may not be available.
• For DivX® and JPEG files, x4 zoom is not available.
• For some DVD, x4 zoom is not available.
•[ZOOM] does not work during the playback of the
BD-video.
•[ZOOM] does not work while DVD menu is
displayed.
Zoom
Zoom
x1.2
x2
Introduction Connections Basic Setup Playback OthersFunction Setup
28
SPECIAL PLAYBACK
EN
Available repeat function varies depending on the discs.
1) During playback, press [REPEAT] repeatedly to
select the desired repeat function.
You can play back the specific part (between point A and
point B) repeatedly.
1) During playback, press [REPEAT A-B] once at the
point where you want to set point A.
2) During playback, press [REPEAT A-B] again at the
point where you want to set point B.
As soon as you set point B, the part between point A
and point B will start to play repeatedly.
To cancel A-B repeat:
Press [REPEAT A-B] repeatedly until “Off” appears.
1) Follow steps 1 to 3 in “Playing Back an Audio CD or a
Disc with DivX®/Windows Media™ Audio/JPEG Files”
on page 23.
2) Open the folder which contains the desired JPEG
files.
3) Use [K/L/s/B] to select a desired track to be
played back, then press [PLAY B] or [OK].
• An image will be played back from the selected track and
go to the next one in turn.
4) Press [STOP C] to stop playback.
To return to the first item:
Press [TOP MENU].
To return to the track/file played last:
Press [DISC MENU / POP-UP MENU].
Some BD-videos have the PiP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressing [BONUSVIEW
(PiP)] whenever the scene contains the secondary video.
1) During playback, press [BONUSVIEW (PiP)].
PiP information will appear.
2) Use [K/L] to select the secondary video you want
to show.
• The secondary video will be displayed with the
secondary audio.
•You can use [K/L] to switch between “On” or “Off”.
3) Press [BACK U] to remove the PiP information.
• On how to output the secondary audio, refer to
“Switching Audio Soundtrack” on page 31 and
“Blu-ray Disc Audio” on page 34.
Repeat Playback
REPEAT MODE AVAILABLE MEDIA
Chapter Repeat
BD-video/DVD-video
The current chapter will be
played back repeatedly.
Title Repeat
BD-video/DVD-video
The current title will be
played back repeatedly.
Track Repeat Audio CD/DTS-CD/DivX®/
Windows Media™ Audio/
JPEG
The current track or file will
be played back repeatedly.
All Repeat
Audio CD/DTS-CD
All tracks in the media will be
played back repeatedly.
Group Repeat
DivX®/Windows Media™
Audio/JPEG
The current group (folder)
will be played back
repeatedly.
Random Repeat (Audio CD)
Audio CD/DTS-CD
Repeats the random
playback.
Random Repeat (Windows
Media™ Audio/JPEG) DivX®/Windows Media™
Audio/JPEG
Repeats the random
playback in a folder.
Note
• The repeat setting will be cancelled when you stop
playback.
• If you press [REPEAT A-B] when the repeat setting
for BD, DVD or CD playback is set, the repeat setting
will be cancelled.
• When the repeat setting is set for a WMA folder, the
repeat setting will be cancelled if you select other
WMA folder to playback.
A-B Repeat
Note
• Point B should be set within the same title or track as
point A.
•If you press [REPEAT A-B] when the repeat setting
for BD, DVD or CD playback is set, the repeat setting
will be cancelled.
• For some DivX® files, A-B repeat playback may not
function.
Slide Show
Note
• Large-size JPEG files take a few moments to be
displayed.
PiP (BONUSVIEW) Setting
Primary
video
Secondary
video
29
SPECIAL PLAYBACK
EN
You can enjoy the BD-Live functions which enable you to
use the interactive functions when the unit is connected to
the Internet. (For the Network connection, refer to
page 43.)
Examples for BD-Live interactive functions :
• Download the additional contents such as the movie’s
trailer, subtitles and BD-Java, etc.
• While downloading, special video data may be played
back.
- Service and functions differ depending on the disc.
Follow the instructions given by the disc when using
the BD-Live function.
- You must insert an SD memory card when using the
BD-Live function. (SD memory card of 1GB is
recommended.)
- Do not remove the SD Memory Card when using the
BD-Live function.
1) During playback, press [NEXT T] to skip the current
title or chapter and move to the next.
The title or chapter will move forward by one at a time.
• If there is no chapter in one title, the current title may
be skipped.
To go back to the beginning of the current title or
chapter, press [PREV S].
Press [PREV S] repeatedly to go to the previous title or
chapter. The title or chapter may move backward one
at a time.
1) During playback, press [INFO ].
2) Use [K/L] to select “Title” or “Chapter”.
3) Use [the Number buttons] or [s/B] to enter the
title/chapter number.
4) Press [OK].
Playback will start from the beginning of the title/
chapter.
5) Press [INFO ] to remove the information display.
Title Search
1) In stop mode, enter the title number you want to
search using [the Number buttons].
Playback of the title will start in a few seconds.
Chapter Search
1) During playback of a title, enter the chapter number
you want to search using [the Number buttons].
Playback of the chapter will start in a few seconds.
Enjoying BD-Live Discs with Internet
Note
• You must connect the unit to the Internet and set up
necessary settings in order to use the BD-Live
function.
• For certain discs, setting for “BD-Live Setting” may
need to be changed.
• Depending on your connection environment, it may
take time to connect to the Internet or the Internet
may not be connected.
• When BD-Live functions are used and the unit is
connected to the Internet, you may be charged for
this communication.
• Some discs with BD-Live function require memory
when playing back the content. If you cannot play
back a disc with BD-Live function, insert an SD
card(1GB or more) which is formatted on this unit.
Note for AACS Online
• The player or disc IDs may be sent to the content
provider when playing back a disc with BD-Live
function.
• If you save your viewing history on the server by
using these IDs, you will be introduced to other
similar movies.
• You can save game score histories.
Title/Chapter Search
Using [PREV S] / [NEXT T]
Using [INFO ]
Using [the Number buttons] (Direct Search)
Note
• As for the BD-video, how it performs will be strongly
determined by the disc, and may not perform as
described.
001/023
00:01:31
001/012
Disc
Title
Chapter
Playing Time
Introduction Connections Basic Setup Playback OthersFunction Setup
30
SPECIAL PLAYBACK
EN
1) During playback, press [NEXT T] to skip the current
track or file and move to the next.
The track/file will move forward one at a time. To go
back to the beginning of the current track/file press
[PREV S].
Press it repeatedly to go to the previous track/file. The
track/file will move backward one at a time.
1) During playback, press [INFO ].
2) Use [K/L] to select “Playing Time”.
3) Use [the Number buttons] to enter the time count
you want to jump to.
e.g.;
Entering 1 hour 45 minutes and 15 seconds.
Press
4) Press [OK].
Playback will start from the desired time count.
5) Press [INFO ] to remove the information display.
Some BD and DVD may have subtitles in 1 or more
languages. For commercially available discs, the
supported languages can be found on the disc case.
Follow the steps below to switch the subtitle languages
during playback.
1) During playback, press [SUBTITLE] repeatedly to
display “Primary”, “Secondary” or “Subtitle Style”.
2) Use [K/L] to select your desired subtitle or style.
•Use [s/B] to switch between current subtitle
setting and “Off”.
3) Press [SUBTITLE] repeatedly to exit.
1) During playback, press [SUBTITLE].
2) Use [K/L] to select your desired subtitle.
•Use [s/B] to switch between current subtitle
setting and “Off”.
3) Press [SUBTITLE] to exit.
Track Search
Using [PREV S] / [NEXT T]
Time Search
Note
• For some DivX® files, time search may not function.
001/023
00:01:31
001/012
Disc
Title
Chapter
Playing Time
Switching Subtitles
“Primary” : Sets the subtitle for the primary
video.
“Secondary” : Sets the subtitle for the secondary
video.
“Subtitle Style” : Sets style of the subtitle.
Note
• Some discs will only allow you to change the
subtitles from the disc menu or pop-up menu. Press
[TOP MENU] or [DISC MENU / POP-UP MENU] to
display the disc menu or pop-up menu.
• If the disc has no subtitle language or subtitle style,
“Not Available” will be displayed on the TV screen.
• During playback of the secondary video, the primary
subtitle setting is not available except when there is
no subtitle for the secondary video.
• For DivX® external subtitle, “Playing Back a DivX®
with DivX® External Subtitle” on page 26.
1
Primary
English
1
Subtitle English
31
SPECIAL PLAYBACK
EN
Some BD and DVD contain multiple audio streams. Those
are often in different audio languages or audio formats.
For BD, available audio varies depending on “Blu-ray Disc
Audio” setting. Refer to page 34 for more information.
1) During playback, press [AUDIO] repeatedly to
display “Primary” or “Secondary”.
2) Use [K/L] to select your desired audio stream
channel.
• For “Secondary”, use [s/B] to switch between
current audio setting and “Off”.
3) Press [AUDIO] repeatedly to exit.
1) During playback, press [AUDIO].
2) Use [K/L] to select your desired audio stream
channel.
3) Press [AUDIO] to exit.
Some BD-video and DVD-video contain scenes which have
been shot simultaneously from various angles. You can
change the camera angle when appears on the TV
screen.
1) During playback, press [ANGLE].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2) Use [K/L] to select your desired angle.
Switching Audio Soundtrack
“Primary” : Sets the audio for the primary video.
“Secondary” : Sets the audio for the secondary video.
2
Primary English
Dolby Digital
Multi
2
Audio English Dolby Digital Multi
e.g.) DVD-video
Note
• The secondary audio will not be output when the
secondary video is not displayed or when “Blu-ray
Disc Audio” is set to “Primary Audio Only”. (For some
BD, secondary audio will be output even when
secondary video is off.)
• The sound mode cannot be changed during
playback of discs not recorded in multiple audio.
• Some discs allow changing the audio language
setting on the disc menu. (Operation varies
depending on the discs. Refer to the manual
accompanying the disc.)
•[AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
• If the disc has no audio language, “Not Available” will
be displayed on the TV screen.
• For DTS-CD (5.1 music disc), selecting audio streams
or channels is not available.
Switching Camera Angles
Note
• If “Angle Icon” setting is set to “Off”, will not
appear on the TV screen. (refer to page 35)
1 / 5
Angle
Introduction Connections Basic Setup Playback OthersFunction Setup
EN32
LIST OF SETTINGS
In the settings menu, you can customize the various kinds of settings as you prefer.
Refer to the following instruction to navigate through the settings menus.
1) Press [HOME ] to access the home menu.
2) Use [K/L] to highlight the “Settings”, then press [OK].
3) Use [K/L] to highlight the “Advanced Setup”, then press [OK].
4) Use [K/L] to move the highlight up and down in the list.
Options of the highlighted item will be displayed in the list on the right whenever available.
5) To make a selection or to access options of an item, highlight the desired item, then press [OK].
6) Press [HOME ] to exit.
Refer to the following table for the types of settings you can customize.
Settings with (*) can be accessed from the “Quick Setup” also.
The item highlighted in gray is the default setting.
Category Menus/Options Description
Advanced Setup
Language Audio Default Sets the audio language for BD-video
or DVD-video playback.
• If you select “Default”, the disc’s
original language will be in effect.
Ceština
Dansk
Deutsch
English
Español
Français
Italiano
Magyar
Nederlands
Norsk
Polski
Português
Русский
suomi
Svenska
Türkçe
Subtitle Off Sets the subtitle language for BD-
video or DVD-video playback.
Ceština
Dansk
Deutsch
English
Español
Français
Italiano
Magyar
Nederlands
Norsk
Polski
Português
Русский
suomi
Svenska
Türkçe
Disc Menu Ceština
Dansk
Deutsch
Norsk
Polski
Português
Русский
suomi
Svenska
Türkçe
Sets the language for disc menu.
English
Español
Français
Italiano
Magyar
Nederlands
Player Menu* Auto (XXXX) Sets the language for player menu
(OSD menu)
“Auto”:
Activates the Get & Set Menu
Language function. (Refer to page 42.)
• “Auto” is available only when
“EasyLink (HDMI CEC)” is set to “On”.
• Inside the parenthesis next to “Auto”
will be the current selected
language.
English
Español
Français
Video
Output
TV Shape*
• Refer to page 38 for
more information.
4:3 Normal
4:3 Crop
16:9 Widescreen
Sets the aspect ratio of the playback
image to fit your TV.
16:9 Squeeze
33
LIST OF SETTINGS
EN
Category Menus/Options Description
Advanced Setup
Video
Output
HDMI Video HDMI 1080p/24
• This feature is available
only when the display
device is connected by
an HDMI cable.
• Refer to page 38 for
more information.
Auto “Auto”:
Outputs the picture in 1080p/24
(1080 progressive with 24 frames per
second) when it meets all the
conditions listed below:
• The video resolution and the frame
rate of the material is 1080p/24 .
• “HDMI Video Resolution” setting is
set to “1080p”.
• The display device supports the
1080p/24 output.
“Off”:
• Outputs the picture in 60p.
(60 frames per second, progressive)
Off
HDMI Video Resolution*
• This feature is available
only when the display
device is connected by
an HDMI cable.
• Refer to page 38 for
more information.
Auto Sets the resolution of the video signal
being output from the HDMI OUT.
• The selected resolution must also be
supported by your TV monitor.
480p
720p
1080i
1080p
HDMI Deep Color
• This feature is available
only when the display
device is connected by
an HDMI cable, and
when it supports Deep
Color feature.
Auto Reduces the posterization effect of
the playback picture.
“Auto”:
Reduces the posterization effect by
automatically outputting the 12 bit
color whenever the unit recognizes
the connected display device
supports Deep Color feature.
“Off”:
Outputs the standard 8 bit color.
Off
Component Output 480i Sets the resolution for the component
output picture.
• The selected resolution must also be
supported by your TV monitor.
• Refer also to your TV’s manual.
• If you have selected the resolution
not supported by your TV by mistake
and the picture gets disturbed, press
and hold
[
B
(PLAY)]
on the front
panel for 5 seconds to change the
setting back to its default.
• When HDMI cable is connected, only
“480i” and the resolution selected in
the “HDMI Video Resolution” will be
available.
480p
720p
1080i
With regard to the
DVD-Video with a copy
protection, the resolution
will be set to 480p
regardless of the setting
here.
If 480p output is not
available, 480i will be
output.
De-interlacing Mode Auto “Auto”:
Automatically detects the film or the
video content, and appropriately
converts it.
“Video”:
Selects when the picture is distorted
when using “Auto”.
Video
Black Level On Adjust the brightness to compensate
for ambient room light.
Off
Noise Reduction
•Not available for
BD-video.
Off Reduces the noise of the playback
picture.
“Off”:
Deactivates the Noise Reduction.
“MPEG NR”:
Reduces the block noise seen
characteristically in the MPEG files.
“3D NR”:
Reduces the rough background noise
so that you can feel the greater feeling
of depth.
“Combo (3D + MPEG)”:
Activating both “MPEG NR” and
“3D NR”.
MPEG NR
3D NR
Combo (3D + MPEG)
Introduction Connections Basic Setup Playback OthersFunction Setup
34
LIST OF SETTINGS
EN
Category Menus/Options Description
Advanced Setup
Audio Night Mode On Compresses the range between soft
and loud sounds.
“On”:
Activates the Night Mode.
“Off”:
Deactivates the Night Mode.
Off
Down Sampling On Sets the sampling rate for outputting
the PCM audio from the digital output
(coaxial/optical).
“On”:
Over 96 kHz PCM audio will be down
sampled at 48 kHz.
“Off”:
For BD or DVD recorded in LPCM
without copyright protection,
2-channel audio signals up to 96 kHz
are output as LPCM signals.
Off
Virtual Surround On Select “On” to enjoy the stereophonic
virtual space through your existing 2
channel stereo system during
playback of BD-video or DVD-video.
Off
Blu-ray Disc Audio Mix Audio Output “Mix Audio Output”:
The audio for the secondary video and
the interactive application will be
output together with the audio for the
primary video.
“Primary Audio Only”:
Only the audio for the primary video
will be output.
When playing back a BD-video which
only contains the primary audio, the
audio output will be the same case as
the “Primary Audio Only” even if the
“Blu-ray Disc Audio” is set to “Mix
Audio Output”.
Primary Audio Only
HDMI Audio
•This feature is
available only when
the display device is
connected by an
HDMI cable.
• Refer to page 39 for
more information.
HDMI Normal Sets the audio format for the sound
output from the HDMI OUT.
PCM
Off
Digital Out
• When HDMI cable is
connected, make
sure “HDMI Audio”
setting is set to “Off”
to change the
“Digital Out”
setting.
• Refer to page 40 for
more information.
Bitstream Sets the audio format for the sound
output from the DIGITAL OUT
(OPTICAL/COAXIAL).
PCM
35
LIST OF SETTINGS
EN
Category Menus/Options Description
Advanced Setup
Audio Analog Audio
• When HDMI cable is
connected, make
sure “HDMI Audio”
setting is set to “Off”
to change the
“Analog Audio”
setting.
Speaker Setup
• Refer to page 41
for more
information.
Front (L/R) Large/Small Sets the speaker configuration to
match the size/number of your
speakers.
• You can also output the test tone
from each speaker by pressing
[RED].
Center Large/Small/Off
Surround (L/R)
Large/Small/Off
Subwoofer On/Off
Speaker Distance Unit Feet Sets the desired measure system.
This measure system will be used for
“Speaker Distance” setting.
Meters
Front (L/R) 0-60 ft default
is 10 ft
Select the distance from the listening
point to the speaker to get the ideal
delay time.
Center 5-10 ft default
is 10 ft
Surround 0-10 ft default
is 10 ft
Default Yes/No default
is “No”
Speaker Level Front (L)
0-12 dB default
is 0 dB
Sets the volume level for each
speaker to get the ideal audio
balance.
Center
Front (R)
Subwoofer
Surround (R)
Surround (L)
Ratings Lock
• Refer to
page 41 for
more
information.
Rating Level All Sets the rating level for the disc
playback.
8 [Adult]
to
1 [Kid Safe]
New PIN Sets the new password for the
“Ratings Lock” setting.
Others Angle Icon On “On”:
The angle icon automatically
appears on the TV screen when
playing back content with various
camera angles available.
“Off”:
The angle icon does not
automatically appear on the TV
screen when playing back content
with various camera angles available.
Off
Auto Standby On Sets whether to turn off the unit (to
the standby mode) automatically
after 25 minutes of no action since
the screen saver is activated.
• If the screen saver is off, the unit
will be turned off after 30 minutes
if no action.
Off
Front Panel Brightness Bright
Dim
Sets the brightness of the front panel
display.
When “Auto” is selected, the front
panel display automatically goes dim
during playback.
Auto
Screen Saver On Sets whether to activate the screen
saver after 5 minutes of no action on
the unit.
Off
Slide Show Slide Show Interval 5sec Sets the amount of time for
displaying one picture before
switching to the next one.
For example, select “5sec” to switch
the picture every 5 seconds.
10sec
Slide Show
Transition
Cut In/Out Sets the visual effect for the slide
show transition mode.
“Cut In/Out”:
The pictures will cut in and out
sharply as playback progresses.
“Fade In/Out”:
The pictures will fade in and out as
playback progresses.
Fade In/Out
Introduction Connections Basic Setup Playback OthersFunction Setup
36
LIST OF SETTINGS
EN
Category Menus/Options Description
Advanced Setup
Others DivX® VOD Your registration code is :
cccccccc
To learn more visit
www.divx.com/vod
This menu item provides you with
the DivX® VOD registration code.
The DivX® registration code is
required when downloading the
DivX® VOD files from the Internet.
To learn more about DivX® VOD,
visit
www.divx.com/vod.
EasyLink (HDMI CEC)
•This feature is
available only when
the display device is
connected with an
HDMI cable, and
when it supports
EasyLink (HDMI
CEC) feature.
• Refer to page 42 for
more information.
On Sets whether to utilize the
EasyLink (HDMI CEC) function.
EasyLink (HDMI CEC) function
allows your PHILIPS brand
EasyLink TV to act in conjunction
with this unit or vice versa.
Off
Network Connection Connection
Test
Perform the network connection
test. After you change the IP
address or DNS setting, always
perform this test.
Enable(Easy)
If you select “Enable(Easy)”,
Connection test will automatically
start.
Enable
(Custom)
IP Address
Setting
Auto(DHCP) Set the IP address.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual IP Address
Subnet Mask
Default
Gateway
DNS
Setting
Auto(DHCP) Set the DNS setting.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual Primary DNS
Secondary
DNS
Proxy
Setting
Do Not Use Set the proxy server.
In most cases, you can connect to
the Internet without using proxy
server.
Use Proxy
Address
Proxy Port
Connection
Speed
Auto Set the connection speed.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
10BASE Half
10BASE Full
100BASE Half
100BASE Full
BD-Live
Setting
Allow You can restrict Internet access
when BD-Live functions are used.
Limited Allow
Prohibit
Network Status You can check the current status of
the network setting.
Disable Yes Deactivate the network
connection.
No
Software Upgrade Disc
Upgrade
Yes Set the disc upgrade.
You can upgrade the firmware
version by using the disc.
To download the latest firmware
version, please visit
www.philips.com/support.
No
Network
Upgrade
Yes Set the network upgrade.
You can upgrade the firmware
version by connecting this unit to
the Internet.
No
37
LIST OF SETTINGS
EN
Category Menus/Options Description
Factory Default
Settings Yes “Yes”:
Resets all the settings, except for
“Ratings Lock” and “Network
Connection”, in “Settings” to the
factory default.
“No”:
Does not perform the initialization.
No
Format SD
Card
Yes “Yes”:
Re-format SD Card.
“No”:
Does not perform the initialization.
No
Local
Storage
Player Yes “Yes”:
Re-format local storage (Player)
used for BD-Java.
“No”:
Does not perform the initialization.
No
SD Card Yes “Yes”:
Re-format local storage (SD Card)
used for BD Java.
“No”:
Does not perform the initialization.
No
Network
Settings
Yes “Yes”:
Initialize network settings.
“No”:
Does not perform the initialization.
No
Introduction Connections Basic Setup Playback OthersFunction Setup
EN38
SETUPS
Use this feature to adjust the aspect ratio of the video
source which is different from your TV’s ratio to fit your TV
monitor without distorting the picture. Descriptions of
each setting are as follows:
Set the resolution of the video signal being output from
the HDMI OUT.
You can select the desired “HDMI Video Resolution”
among the settings listed below:
“Auto”,“480p”,“720p”,“1080i”,“1080p”
• When you make a selection, the TV monitor temporarily
goes blank and then comes back again. If it does not,
press [HDMI] to change the resolution or press and hold
[B(PLAY)] on the front panel for 5 seconds to change
the setting back to its default.
Actual Output Resolution by Media:
(*1) To output the video in 24 Hz, the connected display device must
support 24 Hz output, and “HDMI 1080p/24” should be set to “Auto”.
Otherwise, the image will be output in 60 Hz.
• When HDMI cable is connected, only “480i” and the
resolution selected in the “HDMI Video Resolution” will
be available for the “Component Output”.
• Composite video out (VIDEO OUT) can only output
480i/60.
TV Shape
HOME A“Settings” A“Advanced
Setup” A“Video Output” A“TV Shape”
Video
source
Your
TV Option Description
16:9
4:3
4:3 Normal To enjoy 16:9
picture on 4:3
monitor:
16:9 picture is
scaled down until
the both sides of
the picture fits the
4:3 TV.
4:3 Crop To enjoy 16:9
picture on 4:3
monitor:
Both sides of the
picture are
trimmed to fit the
4:3 TV without
distorting the
aspect ratio of the
picture.
16:9
16:9 Widescreen To enjoy 16:9
picture on 16:9
monitor:
Select this setting
when you want to
enjoy 16:9 picture
on the 16:9 TV.
4:3
16:9 Squeeze To enjoy 4:3
picture on 16:9
monitor:
Use this setting to
display 4:3 picture
on the 16:9 TV
without distorting
the aspect ratio of
the picture.
HDMI Video Resolution
HOME A
“Settings”
A
“Advanced
Setup”
A
“Video
Output”
A“HDMI
Video” A“HDMI Video
Resolution”
Media BD
Setting in
the “HDMI
Video
Resolution”
Source
480i/60
720p/60 1080i/60 720p/24 1080p/24
480p
480p/60 480p/60 480p/60 480p/60 480p/60
720p 720p/60 720p/60 720p/60 720p/60 720p/60
1080i 1080i/60 1080i/60 1080i/60 1080i/60 1080i/60
1080p 1080p/60 1080p/60 1080p/60 1080p/60 1080p/24
or 60(*1)
Auto The highest resolution supported by your display device
will be in effect automatically.
Media DVD DivX® Photo
viewing
OSD-only
viewing
Setting in the
“HDMI Video
Resolution”
Source
480i/60
60,30,other
480p
480p/60 480p/60 480p/60 480p/60
720p 720p/60 720p/60 720p/60 720p/60
1080i 1080i/60 1080i/60 1080i/60 1080i/60
1080p 1080p/60 1080p/60 1080p/60 1080p/60
Auto The highest resolution supported by your display
device will be in effect automatically.
Note
• The selected resolution must also be supported by
your display device.
• If your TV and the unit is connected by a DVI cable
and if you select “Auto”, “480p” will be in effect
automatically.
•Pressing [B(PLAY)] on the front panel for 5 seconds
changes the setting back to its default.
(“Component Output” setting will also be reset to
default (480i).)
• Refer also to your TV’s manual.
39
SETUPS
EN
Refer to the table below to see which setting you should choose.
*1) Only the independent substream is decoded.
*2) Only the Dolby Digital substream is decoded.
*3) Only the core substream is decoded.
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the
“Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”.
HDMI Audio
HOME A“Settings” A“Advanced Setup” A“Audio” A“HDMI Audio”
“HDMI Audio” setting
A “HDMI Normal” “PCM” “Off”
“Blu-ray Disc Audio” setting
A
“Primary Audio
Only”
“Mix Audio
Output”
“Primary Audio
Only”
“Mix Audio
Output” Regardless
Media
ª
Audio Source
ª
Which audio format can be output depends on the compatibility of the
connected device.
BD-video
Dolby Digital
Dolby Digital
or
PCM
or
Mute
Dolby Digital
or
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute Mute
Dolby Digital Plus
Dolby Digital Plus
or
Dolby Digital
or
PCM
*1
or
Mute
Dolby Digital
or
PCM
*1
or
Mute
PCM*1
or
Mute
PCM*1
or
Mute Mute
Dolby TrueHD
Dolby TrueHD
or
Dolby Digital
or
PCM
*2
or
Mute
Dolby Digital
or
PCM
*2
or
Mute
PCM*2
or
Mute
PCM*2
or
Mute Mute
DTS
DTS
or
PCM
or
Mute
DTS
or
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute Mute
DTS-HD
DTS-HD
or
DTS
or
PCM
*3
or
Mute
DTS
or
PCM
*3
or
Mute
PCM*3
or
Mute
PCM*3
or
Mute Mute
LPCM
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute Mute
DVD-video
Dolby Digital Dolby Digital, PCM or Mute PCM or Mute Mute
DTS DTS, PCM or Mute PCM or Mute Mute
LPCM 2ch PCM or Mute 2ch PCM or Mute Mute
DivX® Dolby Digital Dolby Digital, PCM or Mute PCM or Mute Mute
MP2 2ch PCM or Mute 2ch PCM or Mute Mute
Audio CD/ Windows
Media™ Audio PCM 2ch PCM or Mute 2ch PCM or Mute Mute
DTS-CD DTS DTS, PCM or Mute PCM or Mute Mute
Introduction Connections Basic Setup Playback OthersFunction Setup
40
SETUPS
EN
Refer to the table below to see which setting you should choose.
*1) Only the independent substream is decoded.
*2) Only the Dolby Digital substream is decoded.
*3) Only the core substream is decoded.
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the
“Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”.
Digital Out
HOME A“Settings” A“Advanced Setup” A“Audio” A“Digital Out”
“Digital Out”
setting A “Bitstream” “PCM”
“Blu-ray Disc Audio”
setting A
“Primary Audio
Only” “Mix Audio Output” “Primary Audio
Only” “Mix Audio Output”
Media
ª
Audio Source
ª
BD-video
Dolby Digital Dolby Digital Dolby Digital DownMix PCM DownMix PCM
Dolby Digital Plus*1 Dolby Digital Dolby Digital DownMix PCM DownMix PCM
Dolby TrueHD*2 Dolby Digital Dolby Digital DownMix PCM DownMix PCM
DTS DTS DTS DownMix PCM DownMix PCM
DTS-HD*3 DTS DTS DownMix PCM DownMix PCM
LPCM DownMix PCM DownMix PCM DownMix PCM DownMix PCM
DVD-video
Dolby Digital Dolby Digital DownMix PCM
DTS DTS DownMix PCM
LPCM 2ch PCM 2ch PCM
DivX® Dolby Digital Dolby Digital DownMix PCM
MP2 2ch PCM 2ch PCM
Audio CD/ Windows
Media™ Audio PCM 2ch PCM 2ch PCM
DTS-CD DTS DTS DownMix PCM
41
SETUPS
EN
Set the speaker configuration to match the size/number of
your speakers.
1) Use [K/L] to highlight speakers you want to set in
the illustration below.
•If you press [RED], each speaker outputs the test tone for
2 seconds in rotation.
You can move among the speakers as illustrated below:
2) Press [OK] repeatedly to change the setting.
* With regard to the low frequency sound which is less than 100 Hz, the
sound will be output from the Subwoofer.
• For subwoofer, only on/off is available. (You cannot
change the size of the subwoofer.)
• When the front speakers are set to “SMALL”, subwoofer
setting remains “ON” and cannot be changed.
• When subwoofer is set to “OFF”, the front speaker setting
remains “LARGE” and cannot be changed.
Some BD-video or DVD-video feature a ratings lock level.
Playback will stop if the ratings exceed the levels you set, it
will require you to enter a password before the disc will
playback. This feature prevents your children from viewing
inappropriate material.
1) With “Ratings Lock” selected in the “Advanced
Setup” menu, press [OK].
2) If a PIN code has not been set, proceed to step 2-a).
If a PIN code has already been set, proceed to step
2-b).
If you want to change the PIN code, proceed to
step 2-c).
If you forget the PIN code, proceed to step 2-d).
Speaker Setup
HOME A
“Settings”
A“Advanced
Setup” A“Audio” A
“Analog
Audio”
A
“Speaker
Setup”
Speaker Setup
Speaker Distance
Speaker Level
Front (L)
Center
Subwoofer
Front (R)
Surround (L) Surround (R)
: [U]
: [D]
Setting
Suitable for
Front (L/R) Surround
(L/R) Center
Subwoofer
L
A
R
G
E
Large
speakers with
the capacity
for powerful
low frequency
sound.
S
M
A
L
L
Small speakers
which do not
bare the
powerful low
frequency
sound.*
O
N
When
subwoofer
speaker is
connected.
O
F
F
No speakers.
Ratings Lock
HOME A
“Settings”
A“Advanced Setup” A“Ratings
Lock”
Language
Video Output
Audio
Ratings Lock
Rating Level
New PIN
Others
Introduction Connections Basic Setup Playback OthersFunction Setup
42
SETUPS
EN
2-a) Enter 4 digit PIN code using
[the Number buttons].
• “4737” cannot be used.
• Press [RED] to return to the previous screen.
2-b) Enter 4 digit PIN code using
[the Number buttons].
2-c) Follow step 2-b). Select “New PIN”, then press
[OK]. Enter the new PIN code.
2-d) Enter “4737”. Current PIN code and the “Ratings
Lock” settings are now cleared. Follow step 1) and
step 2-a) to create a new PIN code.
3) After entering the PIN code, “Rating Level” appears.
(If not, use [K/L] to highlight “Rating Level”.)
Select desired rating level then press [OK].
To cancel ratings lock temporarily
Some discs allow you to cancel the ratings lock
temporarily. With those discs, the message below will
appear when you try to play them back.
“Please enter your PIN to unblock content.”
Follow the instruction which appears on the screen to
cancel the ratings lock. After entering the PIN code,
“Rating Level” appears.
Select desired rating level, then press [OK].
EasyLink (HDMI CEC) function allows your TV (limited to
PHILIPS brand EasyLink TV) to act in conjunction with this
unit, or vice versa.
When “EasyLink (HDMI CEC)” setting is set to “On”,
functions listed below will be available.
One Touch Play
When this unit is turned on, the TV also is turned on and
the appropriate external input channel will be selected
automatically. The appropriate external input channel
can also be selected on your TV automatically when you
press [PLAY B], [PREV S], [NEXT T],
[the Number buttons], [HOME ], [INFO ],
[TOP MENU], or [DISC MENU / POP-UP MENU] when
the unit’s power is on.
Standby
When you press and hold [STANDBY-ON Q]
for 2 seconds, it turns off the power of the TV first and
then turns off the power of this unit also.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and
automatically sets the same language as the player
menu language (OSD menu language) for this unit.
Refer to the “Player Menu” on page 32 for available
languages.
• This feature is available only when “Auto” is selected in
the “Player Menu” in the settings menu.
RATING EXPLANATIONS
All • Ratings Lock Control is inactive; all
discs can playback.
8 [Adult] • DVD software of any grades (adult/
general/children) can be played
back.
7•[NC-17] No one under 17 admitted.
6•[R] Restricted; under 17 requires
accompanying parent or adult
guardian.
5•[PGR] Parental Guidance
Recommended.
4•[PG13] Unsuitable for children
under 13.
3•[PG] Parental Guidance suggested.
2•[G] General Audience.
1 [Kid Safe] • Suitable for children.
Enter new PIN.
Enter your PIN.
Rating Level
All
8 [Adult]
7
6
5
4
3
2
New PIN
EasyLink (HDMI CEC)
HOME A“Settings” A“Advanced
Setup” A“Others” A“EasyLink
(HDMI CEC)”
43
SETUPS
EN
Set up the network connection settings in order to use the
BD-Live function with a BD-Live disc.
After you made IP address/DNS settings or when a LAN
cable is connected, always perform the connection test to
check if the connection is correctly made.
1) Use [K/L] to highlight “Settings” in the home
menu, then press [OK].
2) Use [K/L] to highlight “Advanced Setup”, then
press [OK].
3) Use [K/L] to highlight “Others”, then press [OK].
4) Use [K/L] to highlight “Network Connection”, then
press [OK].
5) Use [K/L] to highlight “Connection Test”, then
press [OK].
Connection test will start automatically and the test result
will appear right after the connection test finishes.
• “Testing...” : The test is in progress.
• “Pass” : Connection test is successfully completed.
• “Fail” : Connection test failed. Check the connection
settings.
Press [OK] to go to the list of network status confirmation
screen.
6) Press [OK] to go back to the previous screen, or
press [HOME ] to go back to the home menu.
Network settings are set to the following settings initially.
(In most cases, you can connect to the Internet without
making any changes to the default settings.)
If you want to set the network settings back to the default
settings as above (except “BD-Live Setting”), follow the
procedure below.
1) Follow steps 1) to 4) in “Connection Test” on this
page.
2) Use [K/L] to highlight “Enable(Easy)”, then press
[OK].
• The unit will start the connection test automatically
and the test result will appear right after the test
finishes.
• After the connection test finishes, press [OK] to go to
network status confirmation screen.
3) Press [OK] to activate the network settings and set
the network connection automatically. [HOME ]
to go back to the home menu.
In following cases, select “Enable(Custom)” to set each
setting as necessary.
- When connection test failed with the setting of
“Enable(Easy)”.
- When instructed by your Internet service provider to
make specific settings in accordance with your
network environment.
• IP Address Setting / DNS Setting
1) Follow steps 1) to 4) in “Connection Test” on this
page.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “IP Address Setting”, then
press [OK].
4) Use [K/L] to highlight the desired setting, then
press [OK].
Network Connection
Connection Test
HOME
A
“Settings”
A
“Advanced
Setup”
A
“Others”
A
“Network
Connection”
A
“Connection
Test”
Note
• If the connection test passes, you can enjoy the BD-
Live functions using the Internet without making any
extra settings.
• If the connection test fails, you may need to change
the MAC address settings of your router. You can
check the MAC address of this unit on “Network
Status” screen. (refer to page 45).
***.***.***.***
***.***.***.***
***.***.***.***
***.***.***.***
***.***.***.***
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
then press 'OK'.
Enable(Easy)
HOME A“Settings” A“Advanced
Setup” A
“Others”
A
“Network
Connection”
A
“Enable
(Easy)”
- IP Address Setting Auto(DHCP)
- DNS Setting Auto(DHCP)
- Proxy Setting Do Not Use
- Connection Speed Auto
- BD-Live Setting Allow
Note
• The setting of “BD-Live Setting” will not be set back
to the default, even if you follow the procedure.
Enable(Custom)
HOME A“Settings” A
“Advanced
Setup”
A
“Others”
A
“Network
Connection”
A“Enable
(Custom)”
“Auto(DHCP)” : If your router has DHCP server
function, select “Auto(DHCP)”.
“Manual” : If your router does not have DHCP
server function, select “Manual”.
Introduction Connections Basic Setup Playback OthersFunction Setup
44
SETUPS
EN
If you select “Manual”, follow the following
instruction to set the IP address and DNS.
4-a) IP address setting screen will appear. Enter IP
address, subnet mask and default gateway with
cursor buttons and number buttons.
• Enter the IP address number after checking the
specifications of your router.
• If the IP address number is unknown, check the
IP address number of other devices. (e.g. PC
connected via LAN cable) and assign a different
number from those of other devices.
After you enter all correctly, press [OK] to go to the
DNS setting screen.
4-b) DNS setting screen will appear. Enter primary DNS
and secondary DNS with cursor buttons and
number buttons.
• Enter the numbers instructed by your Internet
provider.
• If the number is unknown, check the number of
other devices (e.g. PC connected via LAN cable)
and assign the same number.
4-c) After you enter all correctly, press [OK].
• Confirmation message will appear. Select “Yes”
to complete the settings.
5) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
• Proxy Setting
1) Follow steps 1) to 4) in “Connection Test” on page
43.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “Proxy Setting”, then press
[OK].
4) Use [K/L] to highlight the desired setting, then
press [OK].
• For default settings, select “Do Not Use”.
• If you need to change the proxy setting as instructed
by your Internet service provider to set the
designated proxy address and port, select “Use”.
If you select “Use”, follow the following instructions
to set the proxy address and proxy port.
4-a) Proxy address setting screen will appear.
Enter proxy address.
• The keyboard screen will appear.
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Clear OK
DNS Setting
Primary DNS
Secondary DNS
Clear OK
***.***.***.***
***.***.***.***
***.***.***.***
***.***.***.***
***.***.***.***
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Is Setting OK?
Ye s
No
Note
• The range of input number is between 0 and 255.
• If you enter a number larger than 255, the number
will automatically be 255.
• The manually entered number will be saved even if
you change the setting to “Auto(DHCP)”.
• When you enter a wrong number, press [RED] to
cancel. (the number will be back to “0”.)
• If you want to enter 1 or 2 digit number in one cell,
press [B] to move on to the next cell.
• If the entered IP address or the default gateway or
primary DNS number is same as the default setting,
IP address setting will be set to “Auto(DHCP)”. (The
manually entered number will be saved).
• When IP address setting is set to “Manual”, the
setting of DNS setting will automatically be “Manual”
and when IP address setting is set to “Auto(DHCP)”,
you can set either “Auto(DHCP)” or “Manual” for DNS
setting.
[K/L/s/B]: Move the highlight.
[the Number buttons] : Enter number.
[OK] : Enter the highlighted number/word.
*[RED] : Clear the entered number or word.
[GREEN] : Clear all the entered numbers or words.
[BLUE] : Switch between abc ? ABC ? @!?
*[YELLOW] : Set the entered number or word.
* These buttons can be used in other network settings.
1
a
k
u
2
b
l
v
3
c
m
w
4
d
n
x
5
e
o
y
6
f
p
z
7
g
q
.
8
h
r
-
9
i
s
_
0
j
t
OK
********
Proxy Setting
Proxy Address
Clear All Clear OKa/A/@
45
SETUPS
EN
After you enter all correctly, press [YELLOW] to go to
the proxy port setting screen.
4-b) Proxy port setting screen will appear. Enter proxy
port number with number buttons.
4-c) After you enter all correctly, Press [YELLOW].
• Confirmation message will appear. Select “Yes”
to complete the settings.
5) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
• Connection Speed
You can set connection speed as your preference. (The
default setting is “Auto”.)
1) Follow steps 1) to 4) in “Connection Test” on page
43.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “Connection Speed”, then
press [OK].
4) Use [K/L] to highlight the desired setting, then
press [OK].
“Auto”:
Set the appropriate connection speed automatically, in
accordance with your network environment.
“10BASE Half”:
Set the connection speed to “10BASE Half”.
“10BASE Full”:
Set the connection speed to “10BASE Full”.
“100BASE Half”:
Set the connection speed to “100BASE Half”.
“100BASE Full”:
Set the connection speed to “100BASE Full”.
5) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
• BD-Live Setting
You can limit the Internet access from the BD-Live
functions. (The default setting is “Allow”.)
1) Follow steps 1) to 4) in “Connection Test” on page
43.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “BD-Live Setting”, then
press [OK].
4) Use [K/L] to highlight the desired setting, then
press [OK].
“Allow”:
Internet access is permitted from all BD-Live contents.
“Limited Allow”:
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates are prohibited.
“Prohibit”:
Internet access is prohibited from all BD-Live contents.
5) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
• Network Status
You can check the status of network settings.
1) Follow steps 1) to 4) in “Connection Test” on page
43.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “Network Status”, then
press [OK].
• Network setting list will be displayed.
4) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
Deactivate all the network connection and settings.
1) Follow steps 1) to 4) in “Connection Test” on page
43.
2) Use [K/L] to highlight “Disable”, then press [OK].
3) Use [K/L] to highlight “Yes”, then press [OK].
4) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
Note
• The range of input number for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked
and not be able to use depending on your network
environment.
• If the proxy address is entered with blank only, proxy
server setting will be set to “Do Not Use”.
0
Proxy Setting
Proxy Port
Clear OK
***************
*****
Proxy Address
Proxy Port
Is Setting OK?
Ye s
No
Note
• Choose a connection speed in accordance with your
network environment.
• The network connection may be disabled depending
on the device, when the settings are changed.
Disable
HOME A“Settings” A“Advanced
Setup” A
“Others”
A“Network
Connection” A“Disable”
Note
• The network connection can be reactivated by
setting the network connection to “Enable(Easy)” or
“Enable(Custom)”.
Introduction Connections Basic Setup Playback OthersFunction Setup
46
SETUPS
EN
You can upgrade the software by using disc.
1) Follow steps 1) to 3) in “Connection Test” on page 43.
2) Use [K/L] to highlight “Software Upgrade”, then
press [OK].
3) Use [K/L] to highlight “Disc Upgrade”, then press
[OK].
4) Use [K/L] to highlight “Yes”, then press [OK].
5) Disc tray will open automatically.
• Insert the disc for software upgrade and then press
[OPEN/CLOSE A].
6) After completing loading disc, confirmation
message will appear. Use [s/B] to highlight “Yes”
and press [OK] to start upgrading.
• It may take a while to complete the upgrading.
7) After the disc upgrade finishes, this unit will restart
and open the disc tray automatically. Remove the
disc.
You can upgrade the software by connecting the unit to
the Internet.
1) Follow steps 1) to 3) in “Connection Test” on page 43.
2) Use [K/L] to highlight “Software Upgrade”, then
press [OK].
3) Use [K/L] to highlight “Network Upgrade”, then
press [OK].
4) Use [K/L] to highlight “Yes”, then press [OK].
• This unit will then start checking for the latest
firmware version.
5) Confirmation message will appear.
Use [K/L] to highlight “Yes”, then press [OK].
• The unit will start downloading the latest firmware
version.
6) When the download completes, confirmation
message will appear. Press [OK].
• The unit will start upgrading the firmware version.
• It may take a while to complete the upgrading.
7) After upgrading finishes, this unit will restart and
open the disc tray automatically.
Initialize the setting, SD Memory Card or network setting.
1) Use [K/L] to highlight “Settings” in the home
menu, then press [OK].
2) Use [K/L] to highlight “Factory Default”, then
press [OK].
3) Use [K/L] to highlight the desired setting, then
press [OK].
“Settings”:
All the settings except for the “Ratings Lock” and
“Network Connection” setting will be reset to default.
“Format SD Card” (Available only when an SD
Memory Card is inserted):
Initialize the SD Memory Card.
“Local Storage”:
Local storage for Player or SD Card (Available only
when an SD Memory Card is inserted) used for BD-Java
will be initialized.
“Network Settings”:
Reset the network setting to the default.
4) Use [K/L] to highlight “Yes”, then press [OK].
• Confirmation message will appear. Press [OK] to
complete the setting.
5) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
Software Upgrade
Disc Upgrade
HOME A“Settings” A“Advanced
Setup” A
“Others”
A“Software
Upgrade” A“Disc
Upgrade”
Note
• Please visit www.philips.com/support to download
the latest firmware version.
• Please do not unplug the AC power code while
executing the “Disc Upgrade”.
• All settings will remain the same even if you upgrade
the firmware version.
Network Upgrade
HOME A“Settings” A“Advanced
Setup” A
“Others”
A“Software
Upgrade” A“Network
Upgrade”
Note
• Please do not unplug the AC power code or LAN
cable while executing the “Network Upgrade”.
• All settings will remain the same even if you upgrade
the software version.
• The disc tray will open automatically after upgrading
finishes. This is not a malfunction.
Reset to Factory Default
Note
• Do not remove the SD Memory Card while executing
the “Format SD Card” or “Local Storage” (SD Card). It
will damage the card.
• “Format SD Card” and “Local Storage” (SD Card) are
not available when a Blu-ray Disc is in the unit.
47EN
TROUBLESHOOTING
Problem Tip
POWER
No reaction to the remote control. Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries correctly.
Insert new batteries in the remote control.
No video signal on the display
device.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution using [HDMI] .
Press and hold [B(PLAY)] on the front panel for 5 seconds to change the
setting back to its default.
No audio / video signal on the
display device via HDMI cable.
If the unit is connected to the unauthorized display device with an HDMI
cable, the audio/video signal may not be output.
No high-definition video signal on
the TV.
Does the disc contain high-definition video? High-definition video is not
available when the disc does not contain it.
Does the TV support high-definition video? High-definition video is not
available when the TV does not support it.
No audio signal from the
loudspeakers of the TV.
Assign the audio input of the TV to the corresponding video input.
No audio signal from the
loudspeakers of the audio system.
Turn on the audio system.
Set the audio system to the correct external input.
Increase the volume level of the audio system.
GENERAL
No 5.1-channel audio from the
loudspeakers of the audio system.
Does the disc contain 5.1-channel audio? The 5.1-channel audio is not
available when the disc does not contain it.
Does the audio system support 5.1-channel audio? The 5.1-channel audio is
not available when the audio system does not contain it.
In the settings menu, set “HDMI Audio” to “Off”.
Cannot play back a disc. Make sure that the product supports the disc.
Make sure that the Blu-ray Disc player supports the region code of the DVD
or BD.
(BD: A: DVD: All or 1)
For DVD-RW/-R, make sure that the disc is finalized.
Clean the disc.
SD Memory Card cannot be read. The format of the card does not match that accepted by this unit or the card
is not compatible.
Cannot play back JPEG files from a
disc.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Cannot play back Windows Media™
Audio files from a disc.
Make sure that the sample rate of the Windows Media™ Audio files is 44.1
kHz or 48 kHz.
Cannot play back DivX® files from a
disc.
Make sure that the file extension is .avi, .AVI, .divx or .DIVX
in the upper right hand corner
of the screen.
The operation is not possible.
Cannot find a JPEG file. Make sure that the selected group (folder) does not contain more than
9,999 files for DVD, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Cannot find a Windows Media™
Audio file.
Make sure that the selected folder does not contain more than 9,999 files
for DVD, and 999 files for CD.
Make sure that the file extension is .wma or .WMA for Windows Media™
Audio.
Error message appears when I
select “Auto” in the “Player Menu”.
Make sure that the unit is connected to the PHILIPS brand EasyLink TV and
the “EasyLink (HDMI CEC)” is set to “On”
This error message may appear when your TV’s OSD language is not
supported by this unit.
Introduction Connections Basic Setup Playback OthersFunction Setup
48
TROUBLESHOOTING
EN
Problem Tip
GENERAL
Cannot connect to the network. Check if the LAN cable connection is properly made.
Turn on the modem or broadband router.
Check the network settings.
Check if the broadband router and/or modem is correctly connected.
Check the “BD-Live Setting”.
Cannot connect to the network
while my PC is connected to the
network.
Check the content of your Internet service contract to see if your Internet
Service Provider prevents multiple terminals connecting at the same time.
The capacity of the SD Card
decreased.
The data may be written to the SD card when a BD-video that supports the
virtual package is used and an SD card is in the slot.
MPEG-2 video and audio on the SD
card cannot be played back.
MPEG-2 is noncompliant on this unit.
The contents of the card cannot be
read.
The card is not compatible or the contents on the card may be damaged.
Turn off and then turn the unit on again.
Cannot use the BD-Live function or
download of data does not
perform properly.
Incert an SD card with enough space(1GB or more).
Check if an SD card is correctly inserted.
Cannot play back BD-video(BD-
ROM Profile 2.0).
Insert an SD card(1GB or more) which is formatted on this unit.
Some discs with BD-Live function require memory when playing back the
content.
Do not remove the card during playback.
49EN
GLOSSARY
Analog Audio
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen is
almost square); widescreen models are 16:9 (the TV screen
is almost twice as wide as it is high).
BD-Live
BD-Live is a BD-video (BD-ROM version 2 Profile 2.0) which
contains new functions (e.g. Internet connection), in
addition to the BONUSVIEW function.
Blu-ray Disc (BD)
Blu-ray Disc is a next generation optical video disc which is
capable of storing much more data than a conventional
DVD. The large capacity makes it possible to benefit from
the features such as high-definition videos, multi-channel
surround sounds, interactive menus and so on.
Chapter
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
See also “Title”.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/CR)
is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video (525p/
480p), you can experience higher-density picture than that
in interlace (525i/480i).
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an
analog signal based on these numbers. See also “Sampling
Frequency” and “Analog Audio”.
DivX®
DivX® is a codec (compression/decompression) that can
compress pictures to a very small amount of data. The
software can compress video data from almost any
devices to the size that can be sent on the Internet without
compromising visual quality of the pictures.
DNS Server
A server which translates Internet domain names into IP
addresses.
Dolby Digital
The system to compress digital sound developed by Dolby
Laboratories. It offers you sound of stereo (2ch) or multi-
channel audio.
Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel
surround sound output.
Dolby TrueHD
Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc supports
7.1 multi-channel surround sound output.
DTS (Digital Theater System)
DTS is a multi channel surround sound system. You can
enjoy movie dynamic and realistic sound like movie
theater. DTS surround sound technologies were
developed by DTS, Inc.
DTS-HD
DTS-HD is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc supports 7.1 multi-channel surround sound
output.
Gateway
IP address of the electronic devices (such as router) which
provide Internet access.
HDMI (High Definition Multimedia Interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
Hub
A device used for connecting multiple device to the
network.
IP Address
A set of numbers which are assigned to devices
participating in a computer network.
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You can
copy JPEG files on CD-RW/-R, DVD or SD Memory Card
from a computer and play back the files on this unit.
Introduction Connections Basic Setup Playback OthersFunction Setup
50
GLOSSARY
EN
LAN (Local Area Network)
A group of computer networks covering a small area like a
company, school or home.
Local Storage
A storage area of sub contents for playing virtual packages
on BD-video.
PCM (Pulse Code Modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a lot
of data compared to formats such as Dolby Digital and
MPEG audio. For compatibility with digital audio recorders
(CD, MD and DAT) and AV amplifiers with digital inputs,
this unit can convert Dolby Digital and MPEG audio to
PCM. See also “Digital Audio”.
Proxy Server
Proxy server is a server which acts as an intermediary
between a workstation user and the Internet to ensure
security.
Region Code
Regions associate discs and players with particular areas of
the world. This unit will only play back discs that have
compatible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Router
A networking device which distinguishes the IP address
assigned to each device and routing and forwarding
information in the computer network.
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling in
one second defines as sampling frequency. The higher the
rate, the better the sound quality.
Subnet Mask
A mask which is used to determine what subnet an IP
address belongs to.
Title
A collection of chapters on BD-video or DVD-video. See
also “Chapter”.
Track
Audio CD use tracks to divide up the content of a disc. The
BD-video or DVD-video equivalent is called a chapter. See
also “Chapter”.
Virtual Package
The function which copies data to other media (local
storage) from the Internet and play the secondary video,
secondary audio and the subtitle at the same time. The
method of the playback varies depending on discs.
Windows Media™ Audio
Windows Media™ Audio is the audio compressing
technology developed by Microsoft. You can copy
Windows Media™ Audio files on CD-RW/-R, DVD-RW/-R or
SD Memory Card from a computer and play them back on
this unit.
51EN
SPECIFICATIONS
General
Signal System NTSC Color
Power requirements 120 V AC, 60 Hz
Power consumption 22 W (standby: 0.7 W)
Dimensions (width x height x depth) 17.2 x 2.5 x 11.9 inches (435 x 65 x 303 mm)
Weight 6.8 lbs. (3.1 kg)
Operating temperature 41°F (5°C) to 104°F (40°C)
Operating humidity Less than 80 % (no condensation)
Terminals
Front
SD Card slot
slot x 1
Rear
Audio output (Analog)
RCA jack x 2
RCA jack x 6
L/R: 2 Vrms (output impedance: more than 1kΩ)
FL/FR/SL/SR/C: 2 Vrms (output impedance: more than 1kΩ)
SW: 1.15 Vrms (output impedance: more than 1kΩ)
Video output
RCA jack x 1 1 Vp-p (75Ω)
Component video output
RCA jack x 3 Y: 1 Vp-p (75Ω)P
B/CB: 700 mVp-p (75Ω)PR/CR: 700 mVp-p (75Ω)
Audio output (Digital)
RCA jack x 1
Optical jack x 1
500 mVp-p (75Ω)
Digital connector
HDMI output
HDMI jack x 1 Video: 480p, 720p, 1080i, 1080p/Audio
LAN Terminal 10BASE-T / 100BASE-TX
Note
• The specifications and design of this product are subject to change without notice.
Introduction Connections Basic Setup Playback OthersFunction Setup
EN52
ONE (1) YEAR LIMITED WARRANTY
WARRANTY COVERAGE:
This warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
This product is warranted to the original purchaser or the per-
son receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received within
the Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or
most comparable to the original product in current inventory,
or (3) refund the original purchase price of the product.
The Company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes the company’s property. When a
refund is given, your product becomes the company’s property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all
requirements can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to the new products that
can be identified by the trademark, trade name, or logo affixed
to it. This Limited Warranty does not apply to any non-Philips
hardware product or any software, even if packaged or sold
with the product. Non-Philips manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
The Company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or any non-Philips product or
part not covered by this warranty. Recovery or reinstallation
of programs, data or other information is not covered under
this Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product,
(b) to damage caused by service performed by anyone other
than an Authorized Service Location, (c) to a product or
a part that has been modified without written permission,
or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
•Shipping charges to return defective product.
•Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
•Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
•Damage or claims for products not being available for use, or
for lost data or lost software.
•Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•Product lost in shipment and no signature verification receipt
can be provided.
•Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact Customer Care Center at:
1-866-309-0866
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of incidental
or consequential damages, or allow limitations on how long
an implied warranty lasts, so the above limitations or exclusions
may not apply to you.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
53EN
MEMO
Introduction Connections Basic Setup Playback OthersFunction Setup
54
MEMO
EN
55
MEMO
EN
Introduction Connections Basic Setup Playback OthersFunction Setup
Meet Philips at the Internet
http://www.philips.com/welcome
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
Printed in China
JpnYN-0923/F7-3
1VMN27437C✩
E5K16UD_E5K17UD
Philips and Philips Shield are used under license of
Koninklijke Philips Electronics NV.