Philips BT100M/00 User Manual
Displayed below is the user manual for BT100M/00 by Philips which is a product in the Portable Speakers category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/support
Always there to help you
Question?
Contact
Philips
BT100
User manual
Always there to help you
Register your product and get support at
Question?
Contact
Philips
1EN
Contents
1 Important 2
Safety 2
Notice 3
2 Your portable speaker 5
Introduction 5
What's in the box 5
Overview of the speaker 6
3 Get started 7
Charge the built-in battery 7
Select a source or turn off 8
4 Use Bluetooth devices 9
Connect a device 9
Play audio via Bluetooth 10
Make a call 11
5 Listen to an external device 12
6 Product information 13
Amplier 13
Bluetooth 13
General information 13
7 Troubleshooting 14
General 14
About Bluetooth device 15
2EN
1 Important
Safety
Important Safety Instructions
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves,
orotherdevices(includingampliers)thatproduceheat.
• Onlyuseattachments/accessoriesspeciedbythemanufacturer.
• Referallservicingtoqualiedservicepersonnel.Servicingisrequiredwhen
the device has been damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the device, the
device has been exposed to rain or moisture, does not operate normally, or
has been dropped.
• Devices shall not be exposed to dripping or splashing.
• Donotplaceanysourcesofdangeronthedevice(e.g.liquidlledobjects,
lightedcandles).
• Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never place this apparatus on other electrical equipment.
3EN
Notice
Anychangesormodicationsmadetothisdevicethatarenotexpresslyapproved
by WOOX Innovations may void the user’s authority to operate the equipment.
This product complies with the radio interference requirements of the European
Community.
Hereby, WOOX Innovations declares that this product is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. You
canndtheDeclarationofConformityonwww.philips.com/support.
Disposal of your old product
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means that
the product is covered by the European Directive 2002/96/EC.
Please inform yourself about the local separate collection system for electrical and
electronic products.
Please act according to your local rules and do not dispose of your old products
with your normal household waste. Correct disposal of your old product helps to
prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC,
which cannot be disposed with normal household waste.Please inform yourself
about the local rules on separate collection of batteries because correct disposal
helps to prevent negative consequences for the environmental and human health.
4EN
Always bring your product to a professional to remove the built-in battery.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging
easytoseparateintothreematerials:cardboard(box),polystyrenefoam(buffer)
andpolyethylene(bags,protectivefoamsheet.)
Your system consists of materials which can be recycled and reused if disassembled
by a specialized company. Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and old equipment.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under
license.
Note
•The type plate is located on the bottom of the apparatus.
5EN
2 Your portable speaker
Congratulationsonyourpurchase,andwelcometoPhilips!Tofullybenetfrom
the support that Philips offers, register your product at www.philips.com/welcome.
Introduction
With this speaker, you can
• listen to audio from an external device via Bluetooth connection,
• listen to audio from an external device through the AUX socket, and
• make phone calls.
What's in the box
Check and identify the contents of your package:
• Main unit
• USB cable
• Short user manual
• Safety sheet
6EN
Overview of the speaker
d
c
b
e
f
a
a Battery/Bluetooth indicator
• Lightsup,ashesorturnsoffdependingonthestatusofBT100.
• For details, see the following section Charging indicator and Bluetooth
indicator.
b Integrated microphone
c
• Press to answer an incoming call.
• Press to end the current call.
• Press and hold for 3s to reject an incoming call.
• Press and hold for 3s to change call between BT100 and mobile phone.
• In Bluetooth mode, press and hold for 8s to clear the pairing
information.
d DC IN
• Charge BT100 through the USB cable.
e OFF AUX
• Slide to select Bluetooth/AUX IN mode.
• Slide to power off the speaker.
f AUX
• Connect to an external player.
7EN
3 Get started
Always follow the instructions in this chapter in sequence.
Charge the built-in battery
BT100 is powered by a built-in rechargeable battery.
Note
•Before use, fully charge the built-in battery.
OFF AUX
Connect the USB cable between
• the DC IN socket on the speaker, and
• a USB socket of a computer.
8EN
Charging indicator
Indicator Battery
In Bluetooth mode Flashing blue/Solid blue
(dependingontheworkingstatus)
Under charging
Flashing blue/Solid blue
(dependingontheworkingstatus)
Fully charged
In AUX IN mode Flashing white Under charging
Solid white Fully charged
In OFF mode Flashing white Under charging
OFF Fully charged
Note
•In Bluetooth mode, when the battery is empty, BT100 turns off automatically. And the Bluetooth
indicatorasheswhitewhilerecharging.ToreturntoBluetoothmode,turnBT100 off and select
Bluetooth mode again.
Select a source or turn off
Slide the OFF AUX switch to select a source or turn off BT100.
• : Listen to an external Bluetooth device through Bluetooth connection.
• AUX IN: Listen to an external device through an audio input cable.
• OFF: Turn off BT100.
9EN
4 Use Bluetooth devices
With this speaker, you can listen to audio from a player and make a call through
Bluetooth.
Note
•Make sure that no audio input cable is connected to the AUX socket.
•Philips does not guarantee the compatibility with all Bluetooth devices.
•Before pairing a device with this system, read its user manual for Bluetooth compatibility.
•The product can memorize a maximum of 8 paired devices.
•Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all
other Bluetooth devices.
•Any obstacle between this system and a Bluetooth device can reduce the operational range.
•Keep away from any other electronic device that may cause interference.
Connect a device
1 Switch the slider to .
2 On your Bluetooth device, search for BT100.
3 In the device list, select PHILIPS BT100.
• If a message prompts for the permission for Bluetooth connection with
PHILIPS BT100,conrmit.
• If a password is required, enter 0000andthenconrm.
» BT100 beeps twice when the Bluetooth connection is established.
Bluetooth indicator
The LED indicator on the top indicates the status of Bluetooth connection.
Indicator Bluetooth connection
Flashing blue Connecting or waiting for connection
Solid blue Connected
10 EN
Disconnect a device
• On your device, disable the Bluetooth connection with BT100.
• Or, on BT100, press and hold when it is not during a call.
Note
•BeforeconnectinganotherBluetoothdevice,disconnectthecurrentdevicerst.
Reconnect a device
• For a paired Bluetooth device on which the automatic reconnection is
enabled, this product reconnects with it once it is detected.
• For a paired Bluetooth device that does not support the automatic
reconnection, reconnect it with this product manually.
Play audio via Bluetooth
Note
•If there is an incoming call on the connected mobile phone, music play pauses.
Buttons Functions
Press and hold for 8 seconds to clear the Bluetooth pairing information.
11EN
Make a call
Button functions in Bluetooth mode
Buttons Status Functions
Incoming call Press to answer an incoming call.
Press and hold for more than 3 seconds to reject an
incoming call.
During a call Press to end the current call.
Press and hold for more than 3 seconds to transfer call
between BT100 and the mobile phone.
12 EN
5 Listen to an external device
You can also listen to an external audio device, for example, MP3 player, through
BT100.
OFF AUX
OFF AUX
1
2
1 Connect an audio input cable with a 3.5 mm connector on both ends to
• the AUX socket on this product, and
• the headphone socket on the external device.
2 Switch the slider to the AUX position.
3 Playaudioontheexternaldevice(refertoitsusermanual).
13EN
6 Product information
Note
•Product information is subject to change without prior notice.
Amplier
Rated Output Power 2W RMS
Signal to Noise Ratio >70dB
Aux-in Link 300 mV RMS, 10 kohm
Bluetooth
Bluetoothspecication V3.0 +EDR
SupportedProles HFPv1.5, AD2Pv1.2
Advanced features Echo and noise cancellations
Range 10 m/33 feet line of sight
General information
DC power input USB: 5V, 500mA;
Built-in Li-Polymer battery 3.7V 500mAH
Battery working time >8 hours
Dimensions-MainUnit(LxWxH) 63 x 63 x 82 mm
Weight - Main Unit 0.18 kg
14 EN
7 Troubleshooting
Warning
•Never remove the casing of this device.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this device, check the following points
before requesting service. If the problem remains unsolved, go to the Philips Web
page(www.philips.com/support).WhenyoucontactPhilips,makesurethatthe
device is nearby and the model number and serial number are available.
General
No power
• Recharge your speaker.
No sound
•Adjust volume on the connected device.
•When you listen to audio through Bluetooth, make sure that no audio input
cable is connected to the AUX socket.
•Make sure that your Bluetooth device is within the effective operational
range.
No response from the speaker
•Restart the speaker.
15EN
About Bluetooth device
The audio quality is poor after connection with a Bluetooth-enabled device.
•The Bluetooth reception is poor. Move the device closer to this product or
remove any obstacle between them.
Cannot connect with the device.
•The Bluetooth function of the device is not enabled. Refer to the user
manual of the device for how to enable the function.
•This product is already connected with another Bluetooth-enabled device.
Disconnect that device and then try again.
The paired device connects and disconnects constantly.
•The Bluetooth reception is poor. Move the device closer to this product or
remove any obstacle between them.
•For some devices, Bluetooth connection may be deactivated automatically as
a power-saving feature. This does not indicate any malfunction of this product.
Specifications are subject to change without notice
2014 © WOOX Innovations Limited. All rights reserved.Philips
and the Philips’ Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used by WOOX Innovations
Limited under license from Koninklijke Philips N.V.
BT100_00_UM_V2.0