Philips CAM150OR/00 User Manual
Displayed below is the user manual for CAM150OR/00 by Philips which is a product in the Camcorders category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome CAM150
EN User manual
3EN
Contents
1 Important 4
Safety 4
Notice 4
2 Your camcorder 6
Introduction 6
What’s in the box 6
Functional overview 7
3 Get started 9
Load the Micro SD card 9
Turn on 9
First-time setup 9
Charge the built-in battery 10
4 Use your water and drop proof
camcorder 12
Record video 12
Take pictures 12
Play 12
Options during video play 13
Adjust settings 14
5 Use more of your camcorder 15
View video or pictures on TV 15
Install and use the camcorder software 15
6 Technical specifications 17
7 Frequently asked questions (FAQ) 18
4
n Do not use this camcorder in water
deeper than 3 meters (10 feet) or for
longer than 30 minutes.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Notice
This product complies with the radio
interference requirements of the European
Community.
This product is designed to be waterproof in
compliance with IEC 60529 IP68.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
1 Important
Safety
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Clean only with dry cloth.
f Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
g Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
h Only use attachments/accessories
specified by the manufacturer.
i Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, objects have fallen into the
apparatus or does not operate normally.
j Do not place any sources of danger on
the apparatus (e.g. lighted candles).
k Before use underwater, always securely
close the protective cover at the bottom
of the camcorder.
l Never open the protective cover
underwater or when the camcorder is
still wet after use underwater.
m After use in sea water, immediately
rinse the camcorder with fresh water
to prevent corrosion, then clean the
camcorder with a soft dry cloth and let it
dry in a well-ventilated place away from
direct sunlight.
EN
5
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Always bring your product to a professional to
remove the built-in battery.
Note
The safety logo and power rating information are •
located at the inner side of the protective cover at the
bottom of the camcorder.
EN
6
2 Your camcorder
Introduction
With this portable camcorder, you can:
take full HD (1080P), sports HD (720P •
with 60 FPS) or VGA movies
take pictures•
take the camcorder underwater (up to 3 •
meters, 10 feet)
take with you anywhere thanks to the •
rugged and drop-proof design (1.5-meter
drop-proof)
play recorded movies or pictures either •
directly or on the large screen of a
connected TV
upload the recorded movies or pictures to •
the Internet directly via your PC/Mac
What’s in the box
Make sure that the following items are packed
in the box:
Camcorder•
USB cable (with a mini USB connector)•
Quick start guide•
Pouch•
EN
7
During video play, change the volume.•
Perform the specific function as •
shown on the display panel.
f Shutter button
In viewfinder mode, take a picture or •
start/stop video recording.
In play mode, switch to viewfinder •
mode.
g Fastener
Secure the protective cover.•
h Protective cover
i Mini USB socket
Connect to a PC/Mac through the •
supplied USB cable.
j Reset button
Restore default settings.•
k Micro SD socket
Connect a Micro SD card.•
Functional overview
a Built-in speaker
b Display panel
c
In viewfinder mode, switch to play •
mode.
In play mode, play a selected video •
clip.
Confirm settings.•
d /
Navigate left/right in a menu.•
Select a menu option.•
In play mode, turn to the previous/•
next picture/video clip.
( • ) In viewfinder mode, switch to
the scene selection window.
( • ) In viewfinder mode, switch to
the settings menu.
e +/-
In viewfinder mode, zoom in/out.•
Navigate up/down in a menu.•
Change a value in the settings menu.•
b
a
c
r
q
p
d
f
lm
no
gkhi
j
e
EN
8
l Mini HDMI socket
Connect to a TV through an HDMI •
cable with a mini HDMI connector
(type C).
m Tripod socket
n
Turn on/off the camcorder.•
o MODE
Switch between picture and video •
recording modes.
p Built-in microphones
q Lens
r Flashlight
EN
9
Turn on
Press • .
For first-time users, a menu for OSD »
language selection is displayed (See
‘Get started - Set the OSD language’).
The camcorder switches to viewfinder »
mode.
To turn off the camcorder:
Press and hold • .
The backlight on the display panel »
turns off.
Tip
To save energy, the camcorder turns off automatically •
after being idle for 3 minutes.
First-time setup
When you turn on the camcorder for the first
time, a menu for OSD language selection is
displayed.
1 Press +/- to select a language.
2 Press to confirm.
A welcome message is displayed briefly. »
An inquiry box for date and time »
setting is displayed.
3 Press to highlight [Yes].
A date setting menu is displayed. »
4 Press / to select the day, month and
year fields successively.
5 Press +/- to change the value of each field.
6 Press to confirm the date setting.
A time setting menu is displayed. »
7 Press / to select the hour and minute
fields successively.
8 Press +/- to change the value of each field.
3 Get started
Load the Micro SD card
1 Unlock the fastener on the protective
cover.
2 Flip open the protective cover.
3 Insert a Micro SD card (not supplied) into
the micro SD socket.
Make sure that the the Micro SD card •
is not write-protected.
Make sure that the metal contact of •
the card faces up.
4 Close the protective cover securely.
EN
10
Charge the built-in battery
1 Unlock the fastener to flip open the
protective cover at the bottom of the
camcorder.
2 Connect the camcorder to a PC through
the supplied USB cable.
The status indicator on the shutter »
button starts flashing in orange.
3 Wait until the status indicator stops
flashing and turns to green steadily.
The built-in battery is fully charged. »
Tip
The camcorder is fully charged for first-time use. •
It takes about 3 hours to fully charge the built-in •
battery via the PC.
9 Press to confirm the time setting.
The first-time setup is complete. »
The camcorder enters viewfinder »
mode.
Tip
See ‘Use your camcorder - Adjust settings’ for more •
settings.
Select a scene
1 In viewfinder mode, press to enter the
window for scene selection.
2 Press +/- to select a scene.
3 Press to confirm and go back to
viewfinder mode.
Or press • to cancel and go back to
viewfinder mode.
EN
11
You can also charge the camcorder via a USB
adaptor (not supplied) connected to mains
power. The charge time is about 2 hours.
UK
EUR
EN
12
Take pictures
1 Press MODE once or twice until is
displayed at the upper right corner of the
display panel.
The file size and remaining number »
of pictures that can be taken are
displayed on the display panel.
2 Hold the camcorder steadily and aim the
lens as needed.
3 Press the shutter button down halfway to
adjust the focus.
4 Press the shutter button down completely
to take a picture.
»[Picture saved!] is displayed briefly.
Play
1 In viewfinder mode, press to enter
play mode.
The last recorded media is played »
automatically.
2 Press / to select a picture or video clip
for play.
3 If the selected file is a video clip, press
to start play.
Delete a file
1 In play mode, press / to select a file.
2 Press + to enter the edit window.
3 Press + again to enter the window for
deletion confirmation.
4 Press to highlight [Yes] and confirm the
deletion operation.
»[Deleted!] is dispalyed briefly.
To exit the operation, press » to
highlight [No].
4 Use your water
and drop proof
camcorder
Note
This camcorder is designed to be drop-proof (1.5 •
meters, 5 feet) and water-proof (3 meters, 10 feet).
You can take this camcorder 3 meters (10 feet)
underwater to film or take photos of what’s
happening underwater.
You can also take it out with you on the beach,
in the pool or anywhere you like.
Warning
After use underwater, make sure to rinse the •
camcorder with tap water, then wipe with a soft dry
cloth.
Never open the protective cover when the camcorder
•
is still wet after use underwater.
Record video
1 Press MODE once or twice until is
displayed at the upper right corner of the
display panel.
The selected resolution and remaining »
recording time are displayed on the
display panel.
2 Hold the camcorder steadily and aim the
lens as needed.
3 Press the shutter button to start recording.
A red time indicator is displayed on »
the display panel.
The status indicator on the shutter »
button starts flashing in red.
4 Press the shutter button again to end
recording.
»[Recording saved!] is displayed briefly.
EN
13
Tag a file
1 In play mode, press / to select a file.
2 Press + to enter the edit window.
3 Press - to tag the file.
To untag the file, press • - again.
4 Repeat steps 1 to 3 to tag other files.
Preview
In play mode, press • -.
The thumbnails of 6 files are displayed »
on each page.
To select a file, press »+/-/ / .
Play tagged files
1 During preview, hold .
A tag operation menu is displayed. »
2 Press +/- to select an option, then press
/ to highlight [Yes] for confirmation.
Menu option Description
[Play all] Play all files.
[Play tagged] Play tagged files only.
[Quick impression] Play excerpts of tagged
files.
[Clear all tags] Untag all files.
Options during video play
Fast forward/reverse
During video play, press and hold • / .
To return to the normal speed, •
release / .
Adjust volume level
During video play, press • +/-.
Zoom in a picture
1 In play mode, press / to select a
picture.
2 Press + to enter the edit window.
3 Press to zoom in the picture.
4 Press +/-/ / to pan through the
enlarged picture.
To return to normal view, press • .
Trim a video clip
Note
Only video files not recorded with ‘Dual recording’ can •
be edited (trimmed) on the camcorder.
1 In play mode, press / to select a
recorded video clip.
2 Press + to enter the edit window.
3 Press to enter the trim window.
A bar for video trimming is displayed »
at the top of the window.
4 Press to set the starting point you want.
5 Press to confirm.
6 Press to set the ending point you want.
7 Press to confirm.
A video trim menu is displayed. »
8 Press +/- to select an option, then press
to confirm.
Menu option Description
[Go back] Go back to the trim window.
[Preview edit] Preview the trimmed video
clip.
[Save as new
file]
Save the trimmed video clip
as a new file.
[Cancel and
exit]
Cancel the trim operation
and exit.
EN
14
Settings menu
option
Description
[Date] Set the date.
[Time] Set the time.
[Language] Select your desired menu
language.
[Format SD
card]
Clear contents from the micro
SD card.
[TV system] Change this setting if the
output video does not appear
correctly on your TV.
Adjust settings
1 In viewfinder mode, press .
A settings menu is displayed. »
2 Press +/- to highlight an option.
3 Press / to select a setting.
4 Press to confirm the setting and return
to viewfinder mode.
Settings menu
option
Description
[Flash] Select a flashlight mode: [On],
[Off] or [Auto].
[Resolution] Select a video resolution: [Full
HD] (for best video quality),
[Sports HD] (for filming of fast
moving objects), or [Standard]
(for reduced video file size).
[Photo Size] Select the size of the photos to
be saved (the higher the photo
size, the higher the resolution).
[Scene] Select an automatic exposure
mode that matches your shot
for easy shooting.
[Smile
Detection]
Enable/disable smile detection.
[Dual
recording]
Record full HD and
compressed QVGA videos at
the same time.
[Autoplay] Start automatic play when the
camcorder is connected to a
PC.
[Pre-record] Enable/disable 3-second pre-
record mode.
[Capture
sound]
Turn on/off the capture sound.
EN
15
Install and use the camcorder
software
Warning
If you remove the supplied software, you will not be •
able to get one from ArcSoft for free.
With the software (ArcSoft MediaImpression
HD Edition) available in the internal memory
of the camcorder, you can import, edit, archive
or upload your pictures/videos to the Internet
easily.
Note
The software supplied only works on PCs that operate •
Microsoft® Windows® XP, Vista and Windows 7.
When you connect the camcorder to a Mac, use the
•
iMovie software to import and edit your pictures/
videos directly.
Install the camcorder software
1 Connect the camcorder to a PC (see ‘Get
started’ > ‘Charge the built-in battery’).
2 If the software does not install
automatically, find and click the Setup icon
at My Computer\CAM150.
3 Follow the on-screen instructions to finish
installation of the software.
5 Use more of
your camcorder
View video or pictures on TV
1 Unlock the fastener to flip open the
protective cover at the bottom of the
camcorder.
2 Connect an HDMI cable (not supplied) to:
the • HDMI socket on the camcorder
(requiring a mini HDMI connector)
the HDMI input socket on an HDTV•
An inquiry box for output mode •
selection is displayed.
3 To output the exact camcorder display with
menu options to the TV screen, select [TV].
To output the camcorder display •
without menu options to the TV
screen, select [Live CAM].
4 On the camcorder, select a file and start play.
Mini HDMI /
HDMI
Mini HDMI /
HDMI
EN
16
Install and use the camcorder
software
1 On your PC, click Start\(All) Programs\
ArcSoft MediaImpression HD Edition.
The main screen of the software is »
displayed.
2 Click an option to select the corresponding
operation.
3 Follow the on-screen instructions to
complete the operation.
Transfer video/pictures to a PC/Mac
1 Connect the camcorder to a PC/Mac
(see ‘Get started’ > ‘Charge the built-in
battery’).
It may take some time for the PC/Mac »
to recognize the camcorder.
2 Find your video/pictures at My
Computer\CAM150\DCIM\100MEDIA
or My Computer\CAM150 SD\
DCIM\100MEDIA.
3 Copy any video/pictures you want to your
designated folder in the PC/Mac.
Tip
You can also import the video/picture files with the •
camcorder software (for PC) or iMovie (for Mac).
EN
17
PC interface Mini USB 2.0 port
System support Windows XP/Vista/
Windows 7, Mac
(mass storage only )
TV out NTSC/PAL selectable, Mini
HDMI (type C)
Power rating DC 5V, 500mA
Weight 145 g
Dimensions
(W x H x D)
57.6 x 109.2 x 21.5 mm
6 Technical
specifications
Product information is subject to change
without prior notice.
Image sensor 1/3.2” 8MP CMOS sensor
Operation
modes
Movie record, picture
record
Lens (focusing) Auto focus f=4.76mm
Focus mode Auto focus
Focus range 0.1m to Infinity
Aperture F2.8
Digital zoom 5X
Exposure control Auto
White balance Auto
Auto power off 3 minutes
Memory 64MB (512Mbit) DDR2 +
128MB SLC (96MB for AP)
+ Micro-SD card Slot
Shutter type Electronic
Shutter speed 1/2~1/4000 second
Picture file
format
JPEG
Video container
format
(compression)
*.MP4 (H.264 )
Video resolution Full HD (1080p 30)
1920 X1080 (30fps)
Sports HD (720p 60)
1280X720 (60fps)
VGA (4:3) 640X480
(30fps)
Audio file format AAC
Battery 1100mAh Li-ion (built-in);
120-minute battery life time
based on 720P recording
EN
18
During video capture, do not move the •
camcorder too fast.
Use a tripod (not supplied) if necessary. •
Why do my video/pictures look distorted on a
TV screen?
Select the correct TV system. •
How do I charge the camcorder?
You can charge the camcorder via •
the supported USB cable. When you
connect it to your PC/laptop it will
automatically charge. You can also connect
the camcorder to a USB charger via the
supplied USB cable.
How long do I have to charge the camcorder?
The camcorder is fully charged for first •
usage. The camcorder charge time when
connected to your PC/laptop is 3 hours.
When you charge it via USB adaptor, the
charge time is 2 hours.
Where can I find an adaptor for CAM150 to
charge the battery?
CAM150 can be charged via regular •
USB adaptors, which are readily available
in electronic stores. CAM150 is also
compatible with iPhone adaptors.
How do I fast-forward or rewind on the
camcorder?
You can fast-forward during play of a •
movie by pressing the right-button for 2
seconds. You can rewind during play of a
movie by pressing the left-button for 2
seconds.
Camcorder stopped responding?
In the unlikely event that your camcorder •
stops responding, you can manually reset
it. The reset button is located under the
protective cover. There you see a small
opening beside the USB socket. Please use
a small prying object (like a pen) to insert
and press gently for resetting. After you
have reset the camcorder, please turn on
the camcorder again, and set-up will start
again.
7 Frequently
asked questions
(FAQ)
Why is there no response when I use the
camcorder?
The camcorder is in power-off mode. Turn •
on the camcorder (see ‘Get started’ >
‘Turn on’).
The built-in battery may be drained. •
Charge the battery (see ‘Get started’ >
‘Charge the built-in battery’).
Why is [Memory full!] displayed when I try to
record?
Ensure that the Micro SD card has been •
inserted correctly (see ‘Get started’ >
‘Load the Micro SD card’).
The memory is used up. Save your video/ •
pictures to a computer (see ‘Use more of
your camcorder’ > ‘Transfer video/pictures
to a PC/Mac’). Then delete files from your
camcorder or clear the memory.
How much memory is needed for 1 hour of
Full HD recording?
The CAM150 uses 4GB on average for •
1 hour of Full HD video. For a more
complex video recording (e.g. with lots of
motions in the video, or a lot of panning),
the CAM150 will use more memory. This is
done to maintain the video quality, but will
increase the usage of memory.
Why do I have no access to folders on the
camcorder from my computer?
Ensure that the USB connection is correct. •
The camcorder turns off automatically •
15 minutes after it is connected to a
computer. You can press to turn it on
again.
Why do my video/pictures look blurry?
Hold the camcorder steady in your hands •
during shooting.
EN
19
How do I play my videos on TV?
To play back on TV, please use an HDMI •
connector (mini HDMI to standard HDMI)
if your TV accepts HDMI input.
Why is there no lens cover?
The camcorder comes without a lens •
cover, keeping it simple to use and fuss-
free. It is made of robust material that
doesn’t scratch under normal usage. A
travel pouch and a lens cloth are provided,
allowing you to keep the camcorder clean.
What format does the camcorder record in?
The camcorder uses the same video •
format as Blu-ray players and discs – H.264.
This highly sophisticated format delivers
superb HD picture quality.
What does pre-record mean that is in the
setting?
The pre-record button is designed to •
let you never miss a moment. When
you enable the pre-record function, the
camcorder will record video 3 seconds
before you have pressed the record
button. So when you play-back the
recorded film, you will automatically
see the first 3 seconds before you have
pressed the record button. This can be
useful when filming unexpected moments.
The pre-record function will not drain
battery life, it will operate as normal.
Some video files cannot be edited. Why is
that?
Video files recorded with dual recording •
cannot be edited. To edit video files on the
camcorder, set [Dual recording] to [Off]
before you record video (see ‘Use your
camcorder’ > ‘Adjust settings’).
Tips on video making
You can easily look back on fun moments •
and relive them with the camcorder. To
enjoy these memories to the fullest, here
are some simple video tips:
When capturing videos, hold your •
camcorder steady in your hand
Why does the camcorder sometimes not
record the right color?
To record both indoors and outdoors, •
and not having to change any settings,
the camcorder has an automatic white-
balance correction. This enables you to
record both indoors and outdoors where
the amount of light in the environment
changes. If you move fast from outdoors to
indoors, the camcorder might need some
time to correct that, and in extreme cases
the colors might seem a bit unnatural.
However, after a few seconds this will be
corrected automatically by the camcorder.
Can I connect the camcorder directly to TV,
DVD/Blu-ray player or Home Cinema set via
their USB-port?
The USB connection is designed to share •
your videos/pictures to your PC or Laptop.
You can connect the CAM150 directly
to your TV, DVD/Blu-ray player or Home
cinema set (called the host from this point
on), and it will play the pictures that are
stored on the CAM150. To play the videos
from the CAM150, it depends if your host
supports the file format H.264 of the
CAM150. Most Blu-ray enabled players are
able to play this format.
How do I connect it to a Windows PC/laptop?
Connect the camcorder to your PC/laptop •
via USB. For easy sharing and editing, install
the software program (Media Impression
HD) that comes with the camcorder.
How do I connect it to a Mac?
The camcorder works with the Mac via •
USB. The camcorder works great with
the iMovie software, which is part of the
iLife package that comes with your Mac.
To transfer videos using iMovie, simply
connect the camcorder to your Mac via
USB, launch iMovie and start importing
by clicking the camcorder icon. Select ‘Use
original quality’ to ensure the best quality,
and to maintain file sizes at an optimum.
20
Don’t move too fast when panning •
(i.e. moving the camera horizontally)
as it will be hard to follow what is
captured when you review the video
Try shooting from different angles •
– for example, from the side, from
the front, or even from below. You
can easily join the different video
segments together with the PC
software included
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
CAM150_12_UM_V1.0