Table of Contents
Philips CSP630/00 User Manual
Displayed below is the user manual for CSP630/00 by Philips which is a product in the Car Speakers category. This manual has pages.
Related Manuals
Question?
Contact
Philips
www.philips.com/welcome
Always there to help you
Register your product and get support at
User manual
CSP530 CSP630
2EN
1 Important
Safety
• Read and understand all instructions before you use the apparatus. If damage
is caused by failure to follow instructions, the warranty does not apply.
• Use only the supplied mounting hardware for a safe and secure installation.
• Do not continuously use the speaker system beyond the peak power handling
capacity.
• Keep credit cards, watches, recorded tapes etc. with magnetic coding away
from the speaker system to prevent damage caused by the magnets in the
speakers.
• Clean the apparatus with soft, damp cloth. Never use substances such as
alcohol, chemicals or household cleaners on the apparatus.
Notice
This product complies with the radio interference requirements of the
European Community.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging
easy to separate into three materials: cardboard (box), polystyrene foam (buffer)
and polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused if disassembled
by a specialized company. Please observe the local regulations regarding the disposal
of packaging materials, exhausted batteries and old equipment.
Anychangesormodicationsmadetothisdevicethatarenotexpresslyapproved
by WOOX Innovations may void the user’s authority to operate the equipment.
2013 © WOOX Innovations Limited. All rights reserved.
Specicationsaresubjecttochangewithoutnotice.WOOXreservestheright
tochangeproductsatanytimewithoutbeingobligedtoadjustearliersupplies
accordingly.
2 Your car stereo speakers
Congratulationsonyourpurchase,andwelcometoPhilips!Tofullybenetfromthe
support that Philips offers, register your product at www.philips.com/welcome.
3EN
Introduction
Withthespeakers,youcanenjoyhighpowermusicwithvividsound.
What’s in the box
Check and identify the contents of your package:
a Speakers (x2)
b Grille net + Frame (x2)
c Speaker wire (x2)
d Screw (x8)
e Shrapnel (x8)
b
e
ac
d
3 Installation
A depth of at least 46mm is required to mount the speaker. Measure the depth of
the area where you are to mount the speaker, and ensure that the speaker does
not obstruct any other components of the car.
4EN
Option 1: Mount on door (front or rear)
You can mount the speakers on the front/rear door of your car.
Note
•Make sure that nothing obstructs around the mounting location of the door.
•A hole for mounting may already be cut out of the inner panel of the door (front or rear).
In this case, you need to modify the board only.
•Ensure that the speaker terminals, frame or magnet do not interfere with any inner parts, such
as the window mechanism in the door (when you open or close the window), etc. Also ensure
thatthespeakergrilledoesnottouchanyinnerttings,suchasthewindowcranks,doorhandles,
arm rests etc.
1 Turn off the car ignition key.
• If the power is on, the click noise generated by the connection may
damage the speakers.
2 Cut out the mounting template from the packing box.
3 Paste the template on the location selected for mounting the speaker.
4 Mark the cut-off hole and the 4 bolt holes.
5EN
5 Cut out the marked area and drill the bolt holes.
6 Remove the grille net.
7 Stripthespeakerwiresandconnectthemtotheamplier.
• Black wire: connect to “-“ (negative) terminal
• Black (white lined): connect to “+“ (positive) terminal
Amplifier
Усилитель
Күшейткіш
Підсилювач
White lined
С белым покрытием
Ақ сызығы бар
З білим покриттям
White lined
С белым покрытием
Ақ сызығы бар
З білим покриттям
Right
Правый
Оңға
Правий
Right
Правый
Оңға
Правий
Black
Черный
Қара
Чорний
Black
Черный
Қара
Чорний
Left
Левый
Солға
Лівий
Left
Левый
Солға
Лівий
Car speaker
Автомобильная АС
Динамиктер
Гучномовці
6EN
Note
•Match the “left”, “right”, “+” and “-” terminals correctly. Revised polarity may degrade sound
quality.
•Two 4-ohm speakers, wired in stereo, present a 8 ohm load to each channel of the
amplier.Mosttwochannelampliersworkwellinthisconguration.However,iftwo
4-ohmspeakers,wiredinparalleltoabridgedtwo-channelamplier,presenta2-ohm
monoloadtotheamplier.Most2-channelampliersdonotsupport2-ohmmono
operation!Amplierdamagemayresult!
8 Mount on the speaker as shown below.
9 Press and insert the edges of the grille net.
Tip
•The speaker grille can be mounted without the grille net, if you like.
7EN
Option 2: Mount on rear tray
You can also mount the speakers into the surface of the rear tray.
Follow the steps in section “Option 1: Mount in door” to mount the speakers into
the rear tray:
4 Product information
Note
•Productinformationissubjecttochangewithoutpriornotice.
Model CSP530 CSP630
Speaker type 13 cm, 3-way coaxial
speaker
16.5 cm, 3-way
coaxial speaker
RMS power (Watts) 35 W 40 W
Peak music power (Watts) 180 W 210 W
Sensitivity (dB/W/m) 89 dB 90 dB
Frequency response (Hz) 45-30kHz 40-30kHz
Impedance (ohms) 4 ohms 4 ohms
Magnet mass (Oz) 6.4 Oz 7.6 Oz
Mounting depth (mm) 47 mm 58 mm
8EN
5 Troubleshooting
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, go to the web site
(www.philips.com/welcome). When you contact Philips, ensure that the apparatus is
nearby and the model number and serial number are available.
2013 © WOOX Innovations Limited.
All rights reserved.
This product was brought to the market by WOOX Innovations Limited or one
of its afliates, further referred to in this document as WOOX Innovations, and is
the manufacturer of the product. WOOX Innovations is the warrantor in relation
to the product with which this booklet was packaged. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips N.V.
CSP530\630_00_UM_V2.0