Philips DC390/98 User Manual
Displayed below is the user manual for DC390/98 by Philips which is a product in the Docking Speakers category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
EN User manual 3
ZH-TWԚʹ˫ 19
DC390
DC390_98_UM_V3.0.indb 1 4/11/2012 10:34:12 AM
3
English
EN
Contents
1 Important 4
Safety 4
Notice 6
2 Your Docking Entertainment System 7
Introduction 7
What’s in the box 7
Overview of the main unit 8
Overview of the remote control 9
3 Get started 11
Install batteries 11
Prepare the remote control 11
Connect power 11
Set time and date 12
Turn on 12
4 Play 13
Play from iPod/iPhone/iPad 13
Install the rubber pad 13
Play from an external device 14
5 Listen to radio 15
Tune to a radio station 15
Program radio stations automatically 15
Program radio stations manually 15
Select a preset radio station 15
6 Other features 16
Set the alarm timer 16
7 Adjust sound 17
Adjust volume level 17
Mute sound 17
Select a preset sound effect 17
Enhance bass 17
8 Product information 17
9 Troubleshooting 18
DC390_98_UM_V3.0.indb 3 4/11/2012 10:34:12 AM
4
g Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
h Do not install near any heat sources
such as radiators, heat registers, stoves,
that produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
j Only use attachments/accessories
k Use only with the cart, stand, tripod,
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
n Battery usage CAUTION – To prevent
battery leakage which may result in
bodily injury, property damage, or
damage to the unit:
1 Important
Safety
Know these safety symbols
This ‘bolt of lightning’ indicates uninsulated
material within your unit may cause an
electrical shock. For the safety of everyone
in your household, please do not remove
product covering.
The ‘exclamation mark’ calls attention to
features for which you should read the
enclosed literature closely to prevent
operating and maintenance problems.
electric shock, this apparatus should not be
with liquids, such as vases, should not be
placed on this apparatus.
CAUTION: To prevent electric shock, fully
insert the plug. (For regions with polarized
plugs: To prevent electric shock, match wide
blade to wide slot.)
Important Safety instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
EN
DC390_98_UM_V3.0.indb 4 4/11/2012 10:34:13 AM
5
English
Sound can be deceiving. Over time your
hearing ‘comfort level’ adapts to higher
volumes of sound. So after prolonged
listening, what sounds ‘normal’ can
actually be loud and harmful to your
hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even
at normally ‘safe’ levels, can also cause
hearing loss.
Be sure to use your equipment
reasonably and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as
your hearing adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
hazard and is illegal in many areas.
Install all batteries correctly, + and -
as marked on the unit.
Do not mix batteries (old and new
or carbon and alkaline, etc.).
Remove batteries when the unit is
not used for a long time.
Batteries (battery pack or batteries
installed) shall not be exposed to
or the like.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
q Where the plug of the Direct Plug-
in Adapter is used as the disconnect
device, the disconnect device shall
remain readily operable.
Warning
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical
equipment.
Keep this apparatus away from direct sunlight,
Ensure that you always have easy access to the
power cord, plug or adaptor to disconnect the
apparatus from the power.
Hearing safety
Listen at a moderate volume.
Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that
may cause hearing loss for a normal
person, even for exposure less than a
minute. The higher decibel ranges are
offered for those that may have already
experienced some hearing loss.
EN
DC390_98_UM_V3.0.indb 5 4/11/2012 10:34:13 AM
6
Class II equipment symbol:
CLASS II apparatus with double insulation,
and no protective earth provided.
Note
The type plate is located on the bottom of the
apparatus.
Notice
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
“Made for iPod,” “Made for iPhone,” and
“Made for iPad” mean that an electronic
accessory has been designed to connect
developer to meet Apple performance
standards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards. Please
note that the use of this accessory with
iPod, iPhone, or iPad may affect wireless
performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
EN
DC390_98_UM_V3.0.indb 6 4/11/2012 10:34:13 AM
7
English
2 Your Docking
Entertainment
System
Congratulations on your purchase, and
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can enjoy audio from iPod,
iPhone, iPad, radio, or other audio devices.
The radio, iPod, iPhone, or iPad can be set as
the alarm timer. You can set two alarm timers to
go off at different time.
What’s in the box
Check and identify the contents of your
package:
Main unit
Remote control
1 x MP3 link cable
User manual
Rubber pad
Power cord
EN
DC390_98_UM_V3.0.indb 7 4/11/2012 10:34:13 AM
8
f ALARM 1/ALARM 2
Set the alarm timer.
Turn off the alarm tone.
View alarm settings.
g Display panel
Show the status.
h REPEAT ALARM/BRIGHTNESS
CONTROL
Repeat the alarm.
Adjust the display brightness.
i SOURCE
Select a source: DOCK 1, DOCK 2,
FM tuner, or MP3 link.
Overview of the main unit
a /DATE
View the clock time and date.
b SLEEP
Set the sleep timer.
c /
Tune to a radio station.
d /SET TIME/PROG
Set the clock and date.
Program radio stations.
e
Turn on the unit or switch to
standby mode.
Deactivate the sleep timer.
Stop alarm.
VOL
VOL
SOURCE
SLEEP
SET TIME
PROG
DATE
g
k
i
h
j
m
l
c
e
d
f
a
b
n
p
o
ALARM 1 ALARM 2
REPEAT ALARM
BRIGHTNESS CONTROL
EN
DC390_98_UM_V3.0.indb 8 4/11/2012 10:34:14 AM
9
English
Overview of the remote
control
a POWER
Turn on the unit or switch to
standby mode.
Stop alarm.
Deactivate the sleep timer.
b DOCK
Select Dock1 or Dock2 source.
REP ALM
SLEEP
SET TIME
MENU
VOL
DSC
DBB
POWER
OK
TUNER
MP
3
LINK
MUTE
BRIGHTNESS
PROG
ALM 1 ALM 2
d
c
e
a
b
g
f
h
j
i
k
l
p
o
n
m
j OK/
Start or pause iPod/iPhone/iPad play.
Select FM stereo or FM mono.
k /
Select a preset radio station.
Adjust time.
l VOL +/-
Adjust volume.
m Dock1
Load an iPod/iPhone.
n Dock2
Load an iPod/iPhone/iPad.
o FM antenna
Improve FM reception.
p MP3-LINK
Jack for an external audio device.
EN
DC390_98_UM_V3.0.indb 9 4/11/2012 10:34:15 AM
10
c /
Select a preset radio station.
Navigate through the iPod/iPhone/
iPad menu.
Adjust time.
d /
Tune to a radio station.
e OK/
Start or pause iPod/iPhone/iPad play.
Select FM stereo or FM mono.
f MP3 LINK
Select external audio device source.
g MENU
Select the iPod/iPhone menu.
h SLEEP
Set the sleep timer.
i BRIGHTNESS/REP ALM
Adjust the display brightness.
Repeat the alarm.
j DBB
Turn on or off dynamic bass
enhancement.
k DSC
Select a preset sound setting.
l ALM 1/ALM 2
Set the alarm timer.
Turn off the alarm tone.
View alarm settings.
m VOL +/-
Adjust volume.
n MUTE
Mute volume.
o SET TIME/PROG
Set the clock and date.
Program radio stations.
p TUNER
Select the tuner source.
EN
DC390_98_UM_V3.0.indb 10 4/11/2012 10:34:15 AM
11
English
1 Open the battery compartment.
2 Insert 2 x R6/UM-3/AA size batteries
with correct polarity (+/-) as indicated.
3 Close the battery compartment.
Caution
Remove battery if it is exhausted or will not be
used for a long time.
Batteries contain chemical substances, so they
should be disposed of properly.
Perchlorate Material-special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from
1 Open the battery compartment.
2 Insert one button battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
If you are not going to use the remote control
for a long time, remove the batteries.
Connect power
Caution
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
Risk of electric shock! When you unplug the
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before connecting the AC power cord, ensure
you have completed all other connections.
3 Get started
Caution
Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Install batteries
Note
You can only use AC power as power supply.
Batteries (not supplied) are for backup
purpose.
2
x AA
2
x AA
EN
DC390_98_UM_V3.0.indb 11 4/11/2012 10:34:16 AM
12
Turn on
1 Press POWER.
»The unit switches to the last selected
source.
Switch to standby
1 Press POWER again to switch the unit to
standby mode.
»The time and date (if set) appear on
the display panel.
Note
The type plate is located on the bottom of the
main unit.
1 Connect the AC power cord to the wall
outlet.
Set time and date
1 In standby mode, press and hold SET
TIME for two seconds.
»The hour digits begin to blink.
2 Press to select the 12/24 hour
format.
3 Press / to set the hour
4 Press SET TIME
»The minutes digits begin to blink.
5 Repeat steps 3-4 to set the minute, year,
month, and day.
Tip
In 12 hour format, [MONTH--DAY] is
displayed.
In 24 hour format, [DAY--MONTH] is
displayed.
You can press to toggle between 12 hour
format and 24 hour format during the whole
process.
MP3 LINK FM
ANTENNA
AC ~
EN
DC390_98_UM_V3.0.indb 12 4/11/2012 10:34:16 AM
13
English
To pause/resume play, press OK/
.
To skip to a track, press / .
To search during play, press and hold
/ , then release to resume
normal play.
To go back to the previous iPod/
iPhone menu, press MENU.
To scroll through the menu, press
/ .
OK/
.
»If no key is pressed for more than
10 seconds, OK/ acts back as
the play/pause key.
Install the rubber pad
If necessary, install the supplied rubber pad to
keep the iPad/iPad 2 stable before you place
the iPad/iPad 2.
4 Play
Play from iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
Apple iPod and iPhone models with a 30-pin
dock connector.
Made for:
iPod with video
iPod with color display
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPod classic
iPod Touch (4th generation)
iPod Touch (3rd generation)
iPod Touch (2nd generation)
iPod Touch (1st generation)
iPod mini
iPhone
iPhone 3G
iPhone 3GS
iPhone 4
iPad
Note
IPod with color display, iPod classic, and iPod
with video are not compatible with dock
charging.
Listen to the iPod/iPhone/iPad
1 Press DOCK key to select dock source.
2 Place the iPod/iPhone/iPad into the dock.
EN
DC390_98_UM_V3.0.indb 13 4/11/2012 10:34:17 AM
14
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Tip
For certain iPod models, it may take up to a
minute before the charging indication appears.
If clock is not manually set, when iPod/iPhone/
iPad is connected, the clock radio synchronizes
time from the iPod/iPhone/iPad automatically.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press MP3 LINK to select the MP3 link
source.
2 Connect the supplied MP3 link cable to:
the MP3 LINK jack (3.5mm) on the
back of the unit.
the headphone jack on an external
device.
3 Start to play the device (see the device
user manual).
EN
DC390_98_UM_V3.0.indb 14 4/11/2012 10:34:17 AM
15
English
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations.
1 In the tuner mode, press and hold SET
TIME/PROG for more than 2 seconds to
activate automatic program mode.
»[AUTO] (auto) is displayed.
»The unit automatically stores radio
»
broadcast automatically.
Program radio stations
manually
You can program a maximum of 20 preset
radio stations.
1 Tune to a radio station.
2 Press SET TIME/PROG to activate the
program mode.
3 Press / to select a number.
4 Press SET TIME/PROG
5 Repeat the above steps to program other
stations.
Tip
To overwrite a programmed station, store
another station in its place.
To select FM stereo or FM mono, press OK.
Select a preset radio station
1 Press / to select a preset number.
5 Listen to radio
Note
Only FM radio reception is available on this
unit.
Tune to a radio station
Note
Position the antenna as far as possible from
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust
the position of the antenna.
1 Press TUNER to select FM tuner.
2 Press and hold / for more than 2
seconds.
»[SRCH] (search) is displayed.
»The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station, press /
reception.
Tip
[STEREO] is default setting for tuner mode.
Under tuner mode, you can press OK
repeatedly to toggle between [STEREO] and
[MONO], and the unit memorizes your setting
even if you turn off the unit or turn to other
sources.
EN
DC390_98_UM_V3.0.indb 15 4/11/2012 10:34:17 AM
16
»If the timer is deactivated, [ AL1] or [
AL2] is displayed.
Repeat alarm
1 When the alarm rings, press
BRIGHTNESS/REP ALM.
»The alarm repeats ringing minutes later.
Tip
You can press / to adjust the interval to
repeat alarm.
Stop alarm ring
1 When the alarm rings, press the
corresponding ALM 1 or ALM 2.
»The alarm stops but the alarm settings
remain.
View the alarm settings
1 Press ALM 1 or ALM 2.
Adjust display brightness
1 Press BRIGHTNESS/REP ALM
repeatedly to select different levels of
display brightness.
6 Other features
Set the alarm timer
You can set two alarms which go off at different
time.
1 Make sure that you have set the clock
correctly. (See “Get started - Set time
and date”.)
2 Press and hold ALM 1 or ALM 2 for two
seconds.
»[AL 1] or [AL 2] begin to blink.
3 Press SOURCE on the top panel to select
an alarm sound source: DOCK1, DOCK2,
FM tuner, or buzzer.
4 Press ALM 1 or ALM 2.
»The hour digits begin to blink.
5 Press / repeatedly to set the hour.
6 Press ALM 1 or ALM 2
»The minute digits begin to blink.
7 Repeat steps 5-6 to set the minute.
8 Repeat steps 5-6 to select whether to
ring alarm the whole week, on weekdays,
or at weekend.
9 Repeat steps 5-6 to set the alarm volume.
Tip
You can create a playlist in iTunes called
“PHILIPS” and import it to your iPod/iPhone/
iPad as alarm source.
If no playlist is created in the iPod/iPhone/iPad
or there is no song in the playlist, the unit will
wake to songs in the iPod/iPhone/iPad.
Activate and deactivate the alarm
timer
1 Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
»If the timer is activated, [ AL 1] or [
AL2] is displayed.
EN
DC390_98_UM_V3.0.indb 16 4/11/2012 10:34:18 AM
17
English
8 Product
information
Note
Product information is subject to change
without prior notice.
!
"
Rated Output Power
2 x 5 W RMS
Frequency Response
40 -20000 Hz, -3dB
Signal to Noise Ratio
>67 dB
Aux Input (MP3 link)
750 mV RMS 20 kohm
FM
Tuning Range
FM 87.5 - 108 MHz
Tuning grid 50 KHz
- Mono, 26 dB S/N Ratio
- Stereo, 46 dB S/N Ratio
<22 dB
<51 dB
Search Sensitivity <41 dB
Total Harmonic Distortion
<2%
Signal to Noise Ratio >45 dB
Speakers
Speaker Impedance 4 ohm
Speaker Driver 57mm
Sensitivity >84dB/m/W
7 Adjust sound
Adjust volume level
1 During play, press VOL +/- to increase/
decrease the volume level.
Mute sound
1 During play, press MUTE to mute/unmute
sound.
Select a preset sound effect
1 During play, press DSC repeatedly to
select:
[ROCK] (rock)
[JAZZ] (jazz)
[POP] (pop)
[CLASSIC] (classic)
[FLAT]
Enhance bass
1 During play, press DBB to turn on or off
dynamic bass enhancement.
»If DBB is activated, [DBB] is displayed.
EN
DC390_98_UM_V3.0.indb 17 4/11/2012 10:34:18 AM
18
9 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
#Ensure that the AC power plug of the
unit is connected properly.
#Ensure that there is power at the AC
outlet.
#Ensure that the batteries are inserted
correctly.
No sound
#Adjust the volume.
No response from the unit
#Disconnect and reconnect the AC power
plug, then turn on the unit again.
Poor radio reception
#Increase the distance between the unit
and your TV or VCR.
#Fully extend the FM antenna.
Timer does not work
#Set the clock correctly.
#Switch on the timer.
Clock/timer setting erased
#Power has been interrupted or the power
plug has been disconnected.
#Reset the clock/timer.
General information
AC power 100 - 240 V~, 50/60 Hz
Operation Power
Consumption
17 W
Standby Power
Consumption
(clock display) <2 W
Dimensions
- Main Unit
(W x H x D)
263 x114 x 165 mm
Weight
- Main Unit 1.4 kg
EN
DC390_98_UM_V3.0.indb 18 4/11/2012 10:34:18 AM
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
DC390_98_UM_V3.0
DC390_98_UM_V3.0.indb 36 4/11/2012 10:34:25 AM