Philips DCB2070/10 User Manual
Displayed below is the user manual for DCB2070/10 by Philips which is a product in the Home Audio Systems category. This manual has pages.
Related Manuals
EN User manual 3
DA Brugervejledning 23 Brugervejledning 23 23
DE Benutzerhandbuch 45 Benutzerhandbuch 45 45
FR Mode d’emploi 69
IT Manuale utente 91
NO Brukerhåndbok 115
DCB2070
Register your product and get support at
www.philips.com/welcome
3
English
EN
Contents
1 Important 4
Know these safety symbols 4
Hearing Safety 5
2 Your Micro System 5
Introduction 5
What's in the box 5
Overview of the main unit 6
Overview of the remote control 7
3 Get started 9
Placement 9
Prepare FM/DAB+ antenna 9
Prepare the remote control 9
Connect power 9
Set clock 10
Turn on 10
4 Play 11
Play disc 11
Play from USB 11
Play from iPod/iPhone/iPad 11
Play options 12
Adjust sound 13
Display different information 13
5 Listen to DAB+ radio 13
Tune to DAB+ radio stations 13
Store DAB+ radio stations
automatically 14
Store DAB+ radio stations manually 14
Select a preset DAB+ radio station 14
Show DAB+ information 14
Use DAB+ menu 14
6 Listen to FM radio 15
Tune to FM radio stations 15
Store FM radio stations automatically 15
Store FM radio stations manually 16
Select a preset radio station 16
Show RDS information 16
Select stereo/mono broadcast 16
Use FM menu 16
7 Other features 17
Adjust system settings 17
Set the alarm timer 18
Set the sleep timer 18
Play from external audio device 18
Listen through the headphone 18
8 Product information 19
USB playability information 19
Supported MP3 disc formats 20
9 Troubleshooting 20
10 Notice 21
4EN
1 Important
Read these instructions.
Follow all instructions.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
produce heat.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the unit.
by the manufacturer.
Unplug this unit during lightning storms or
when unused for long periods of time.
personnel. Servicing is required when the
unit has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the unit has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
remote control:
Install all batteries correctly, + and - as
marked on the remote control.
Do not mix batteries (old and new or
Remove batteries when the remote control
is not used for a long time.
The unit shall not be exposed to dripping
or splashing.
Do not place any sources of danger on
Where the plug of the Direct Plug-in
Adapter is used as the disconnect device,
the disconnect device shall remain readily
operable.
Know these safety symbols
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
shock, this apparatus should not be exposed to
such as vases, should not be placed on this
apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Warning
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical
equipment.
Keep this apparatus away from direct sunlight, naked
Never look into the laser beam inside this apparatus.
Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
5
English
EN
Hearing Safety
Danger
To avoid hearing damage, limit the time you use the
headphones at high volume and set the volume to a
safe level. The louder the volume, the shorter is the safe
listening time.
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume
continuously upwards as your hearing
adapts.
Do not turn up the volume so high that
you can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
2 Your Micro
System
Congratulations on your purchase, and
support that Philips offers, register your product
at www.philips.com/welcome.
Introduction
With this unit, you can:
enjoy audio from discs, iPod/iPhone/iPad,
USB devices, and other external devices
listen to FM/DAB+ radio
You can enrich sound output with these sound
effects:
What's in the box
Check and identify the contents of your
package:
Main unit
Remote control
Power adapter
1 x MP3 link cable
User manual
Quick start guide
Wall mounting instructions
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. _____________________________
Serial No. _____________________________
6EN
Overview of the main unit
a
Connect USB device.
b
Headphone socket.
c
Turn the unit on/off.
Switch to standby mode.
d SOURCE
Select a source: CD, USB, DAB+, FM,
MP3 Link, or Dock.
DOCK for
a
h
i
j
b
c
d
e
f
k
l
m
g
o
p
n
DC IN
3A
V
12
FM
ANT
MP3-LINK
OK / MENU /
SOURCE VOLUME VOLUME
e /
Skip to the previous/next track.
Search within a track/disc.
Tune to radio stations.
Adjust time.
f OK /
Start/pause play.
Switch between mono and stereo
broadcast.
g MP3-LINK
Connect an external audio device.
7
English
EN
h
Open/close the disk tray.
i VOLUME + / -
Adjust volume.
j MENU /
Access iPod/iPhone/iPad menu.
Access FM/DAB+ menu.
Stop play or erase a program.
k Display panel
Show play information.
l Disc tray
m DOCK for iPod/iPhone/iPad
n DC IN
Connect power.
o FM ANT
Improve FM/DAB+ radio reception.
p FOR SOFTWARE UPDATE ONLY
Update software via USB connector
Overview of the remote
control
a
Turn the unit on/off.
Switch to standby mode.
b
Mute/unmute sound.
PRESET/ALBUM
PROG/
CLOCK SET
SLEEP/
TIMER
DSC DBB
FM
DAB
VOL
3
456
789
1
0
2
CD
MODE/
SCAN
OK
MENU
USB
MP
3
LINK
DOCK
DISPLAY
RDS
a
b
c
e
f
g
p
o
d
h
i
j
m
n
k
l
s
r
q
8EN
c CD
Select CD source.
d /
Skip to the previous/next track.
Search within a track/disc.
Tune to radio stations.
Adjust time.
e USB/MP3 LINK
Select USB/MP3 link source.
f RDS/DISPLAY
For selected FM radio stations: display
RDS information.
Show time and play information.
Show DAB+ information.
g
Start/pause play.
h VOL +/-
Adjust volume.
i Numeric Keypad 0 - 9
Select a track from a disc/USB device
directly.
Select a preset radio station.
j PROG/CLOCK SET
Program tracks.
Program radio stations.
Set time.
k SLEEP/TIMER
Set sleep/alarm timer.
l DSC
Select a preset sound setting.
m DBB
Turn dynamic bass enhancement on/
off.
n MODE/SCAN
Select a play mode.
Scan/store radio stations automatically.
o MENU/
Access iPod/iPhone/iPad menu.
Access FM/DAB+ menu.
Stop play or erase a program.
p DOCK
Select iPod/iPhone/iPad source.
q OK
Switch between mono and stereo
broadcast.
r /
Select a preset radio station.
Skip to previous/next album.
s FM/DAB
Select FM/DAB+ tuner source.
9
English
EN
3 Get started
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
Placement
mount the unit on a wall.
Mount on a wall
See the wall mounting instructions included in
the package.
Prepare FM/DAB+ antenna
For better reception, fully extend and adjust the
position of the FM/DAB+ antenna.
Note
To prevent interference, position the antenna as far as
possible from TV, VCR, or other radiation source.
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,
Risk of decreased battery life! Never mix different
brands or types of batteries.
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
To install the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
3 Close the battery compartment.
Connect power
Caution
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
Risk of electric shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Before connecting the power adapter, make sure that
you have completed all other connections.
Note
The type plate is located at the back of the unit.
a
b
c
10 EN
Connect the power adapter to:
the DC IN socket on the main unit.
the wall socket.
Set clock
1 Press to switch the unit to standby
mode.
» --:-- is displayed.
2 Press and hold CLOCK SET on the
remote control for two seconds.
» [SET CLOCK]
the display, and then 12 or 24 hour
format blinks.
3 Press / repeatedly to select hour
format.
4 Press CLOCK SET
5 Repeat steps 3-4 to set the hour and
minute respectively.
6 Repeat steps 3-4 to select whether to
synchronize time of this unit with DAB+
stations.
[DAB TIME SYNC [N] ]: time
synchronization is deactivated.
[DAB TIME SYNC [Y] ]: the unit
synchronizes time from the DAB+
stations automatically.
Note
The accuracy of the transmitted time depends on the
DAB+ station that transmits the time signal.
If no button is pressed in 90 seconds, the unit exits
clock setting mode automatically.
Turn on
Press .
» The unit switches to the last selected
source.
Note
To select a source, press SOURCE repeatedly or the
source selection buttons on the remote control.
Switch to standby mode
Press again to switch the unit to standby
mode.
»
panel.
11
English
EN
4 Play
Play disc
1 Press to open the disc compartment.
2 Insert a disc with the printed side facing up.
3 Press to close the disc compartment.
4 Press CD on the remote control to select
the disc source.
» [Reading]
moment, then CD starts playing
automatically. If not, press .
Play from USB
Note
Make sure that the USB device contains playable audio
content.
1 Insert the USB device into the socket.
2 Press USB on the remote control to select
the USB source.
» Play starts automatically. If not, press
.
Play from iPod/iPhone/iPad
You can enjoy audio from iPod/iPhone/iPad
through this unit.
Compatible iPod/iPhone/iPad
The unit supports the following iPod, iPhone
and iPad models:
Made for.
iPod touch (1st, 2nd, 3rd, and 4th
iPod nano (2nd, 3rd, 4th, 5th, and 6th
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
iPad 2
iPad
Load the iPod/iPhone/iPad
1 Push the dock compartment to open it.
2 Place the iPod/iPhone/iPad in the dock.
12 EN
Install the rubber pad
If necessary, install the supplied rubber pad to
keep the iPad/iPad 2 stable before you place
the iPad/iPad 2.
Listen to the iPod/iPhone/iPad
1 Make sure that the iPod/iPhone/iPad is
loaded correctly.
2 Press SOURCE repeatedly or DOCK on
the remote control to select iPod/iPhone/
iPad source.
3 Play tracks in the iPod/iPhone/iPad.
To pause/resume play, press .
To skip to a track, press / .
To search during play, press and hold
/ , then release to resume
normal play.
To go back to the previous iPod/
iPhone/iPad menu, press MENU.
To scroll through the menu, press
/ .
OK.
Remove the iPod/iPhone/iPad
Pull the iPod/iPhone/iPad out of the dock.
Charge the iPod/iPhone/iPad
Note
iPod with color display, iPod classic, and iPod with video
are not compatible with dock charging.
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Tip
For certain iPod models, it may take up to a minute
before the charging indication appears.
Play options
Pause/resume play
During play, press to pause/resume play.
1 During play, press MODE/SCAN
repeatedly to select a repeat option or the
: play the current track
repeatedly.
: play all tracks in this album
repeatedly.
: play all tracks repeatedly.
: play all tracks randomly.
2 To resume normal play, press
MODE/SCAN repeatedly until no option
is displayed.
Skip to a track
For CD:
Press / to select another track.
For MP3 disc and USB:
1 Press / to select an album or a folder.
2 Press /
Tip
To select a track directly, you can also press a key on
the numerical keypad.
Search within a track
1 During play, press and hold / .
2 Release to resume normal play.
13
English
EN
Program tracks
You can program a maximum of 20 tracks.
1 In CD/USB mode, press to stop
playback, then press PROG to activate the
programming mode.
» [PROG]
2 For MP3/WMA tracks, press / to
select an album.
3 Press / to select a track, then press
PROG
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG
displayed.
To erase the program, when playback
is stopped, press .
Adjust sound
During play, you can adjust volume and select
sound effects.
Function Action
To increase/decrease volume Press VOL +/-.
To mute/restore sound Press .
To turn dynamic bass
enhancement on/off
Press DBB.
To select a sound effect:
[POP
[JAZZ
[CLASSIC
[ROCK
[FLAT
Press DSC
repeatedly.
Display different information
During play, press DISPLAY repeatedly to view
time and different play information.
5 Listen to DAB+
radio
of broadcasting radio digitally through a
network of transmitters. It provides you with
more choice, better sound quality and more
information.
Tune to DAB+ radio stations
Note
Make sure that the antenna is fulled extended.
1 Press DAB/FM repeatedly to select DAB+
radio.
» [FULL SCAN]
2 Press OK to start full scan.
» The unit stores all the DAB+ radio
stations automatically and then
» The station list is memorized in the
unit. Next time when you turn on the
unit, the station scan does not take
place.
Note
If no DAB+ radio station is found, [No DAB Station]
[FULL SCAN] (full
To tune to a station from the available station
list:
1 In DAB+ mode, press / repeatedly
to navigate through the available DAB+
stations.
2 Press OK
14 EN
Store DAB+ radio stations
automatically
Note
New stations and services will be added in DAB+
broadcast from time to time. To make new DAB+
stations and services available, perform full scan
regularly.
In DAB+ mode, press SCAN.
» The unit scans and stores all the available
DAB+ radio stations and broadcasts the
Store DAB+ radio stations
manually
Note
You can store a maximum of 20 preset DAB+ radio
stations.
1 Tune to a DAB+ radio station.
2 Press and hold PROG for 3 seconds to
activate the storing mode.
3 Press / to select a preset number.
4 Press PROG
5 Repeat the above steps to store other
DAB+ stations.
Note
To remove a pre-stored DAB+ radio station, store
another station in its place.
Select a preset DAB+ radio
station
In DAB+ mode, press / to select a preset
channel number.
Show DAB+ information
While listening to DAB+ radio, press DISPLAY
repeatedly to scroll through the following
» Station name
»
» Signal strength
»
» Ensemble Name
» Channel and frequency
» Signal error rate
» Bit rate and audio status
» Date
Use DAB+ menu
1 In DAB+ mode, press MENU to access
DAB+ menu.
2 Press / to scroll the menu options:
[Station list]: tune to a DAB+ radio
station from a list of available DAB+
stations, or scan DAB+ stations if no
station is stored in the list.
[Full scan]: scan and store all the
available DAB+ radio stations.
[Manual tune]: tune to a DAB+ station
manually.
[Prune]: remove all the invalid stations
from the station list.
[System]: adjust system settings.
3 To select an option, press OK.
4 If a sub-option is available, repeat step 2
and step 3.
15
English
EN
[System]
[Factory Reset]: reset all the settings to
factory default.
[Software Upgrade]: update software if
available.
[SW version]: know the software version
of the unit.
Note
If no button is pressed within 10 seconds, the menu
exits.
6 Listen to FM
radio
Tune to FM radio stations
Note
Position the antenna as far as possible from TV, VCR, or
other radiation source.
Make sure that you have connected and fully extended
the supplied FM antenna.
1 Press FM to select FM tuner mode.
2 Press and hold / for 3 seconds.
» [Scanning]
» The unit tunes to an FM station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station:
Press /
reception.
Store FM radio stations
automatically
Note
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold MODE/
SCAN for 3 seconds.
» The unit stores all the FM radio stations
preset radio station.
16 EN
Store FM radio stations
manually
1 In tuner mode, tune to an FM radio station.
2 Press PROG to activate programming
mode.
» [PROG]
3 Press / repeatedly to select a channel
number.
4 Press PROG
5 Repeat steps 1-4 to store other FM
stations.
Note
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press / or the numeric
buttons to select a preset number.
Show RDS information
that allows FM stations to show additional
information.
1 Tune to an RDS station.
2 Press RDS repeatedly to scroll through the
» Program service
» Program type such as [NEWS]
[SPORT][POP M] (pop
» Radio text message
» Time
Select stereo/mono broadcast
Note
Stereo broadcast is the default setting for tuner mode.
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press OK to switch between
mono and stereo broadcast.
Use FM menu
1 In FM mode, press MENU to access FM
menu.
2 Press / repeatedly to scroll the
menu options:
[Scan setting]
[Audio setting]
[System]
3 To select an option, press OK.
4 Repeat steps 2-3 if sub-option is available
under one option.
Scan setting
[Strong stations only]: scan FM stations
with strong signals only.
[All stations]: scan all the available FM
radio stations.
Audio setting
[Stereo allowed]: select stereo broadcast.
[Forced mono]: select mono broadcast.
17
English
EN
7 Other features
Adjust system settings
1 In FM/DAB+ mode, when [System] menu
is displayed, press / repeatedly to
select an option.
2 Press OK
[Factory
Reset]
[Yes] Reset all the settings
to the default settings
made at the factory.
[No] Cancel.
[SW
version]
Display software
version.
[Software
Upgrade]
[Yes] Select to update
software.
[No] Cancel.
Update software (if available)
Software upgrade for your micro system
may be available in future. If you register your
product at Philips website (www.philips.com/
can visit Philips website constantly to check if
the updating information is provided.
Register your product
1 Go to www.philips.com/welcome.
2 Click the link of "Register my product"
(the exact wording of this link name may
3 Log in with your account on the prompt
Web page.
If you have no account for Club Philips,
4 Search your product with "DCB2070/10"
as the keywords.
5 Click the link of search results to access the
Web page for registering your product.
6 Fill in necessary information about this
product to complete the registration.
Update software via USB port
To upgrade the software of your micro system,
follow these steps strictly:
1 Go to www.philips.com/welcome.
2 Log in with your account for Club Philips.
» Support information about your
registered product is displayed.
3 Check the latest software version.
4 Download the latest software to your
computer, then connect this unit to PC via
5 In DAB+ mode, press MENU.
6 Select [SYSTEM][Upgrade?
Yes]
»
7 Select [Yes] to go to the upgrade stage.
To select an option, press / ; to
OK.
8 When the upgrade is complete, the unit
will be restarted.
Note
If you select to update software without downloading
the latest software or connecting to PC via USB port,
you need power off and restart the unit.
If upgrade is interrupted by accident, you must restart
the unit and reinstall the software, otherwise your unit
cannot work normally.
18 EN
Set the alarm timer
This unit can be used as an alarm timer. You can
select CD, FM tuner, iPod/iPhone/iPad, DAB, or
USB as alarm source.
Note
Make sure that you have set the clock correctly.
1 In standby mode, press and hold TIMER
until [SET TIMER]
display.
» [SELECT SOURCE]
displayed.
2 Press SOURCE repeatedly or the source
selection buttons on the remote control to
select a source: disc, FM tuner, iPod/iPhone/
iPad, DAB+, or USB.
3 Press TIMER
» The hour digits blink.
4 Press / repeatedly to set the hour.
5 Press TIMER
» The minute digits blink.
6 Repeat steps 4-5 to set the minute.
7 Press / to select the volume of the
alarm sound, then press TIMER
Note
If no button is pressed in 90 seconds, the unit exits
alarm setting mode automatically.
If iPod/iPhone/iPad is selected as alarm source, and you
have created a playlist called "PHILIPS" in iTunes and
import it to your iPod/iPhone/iPad, you will wake to a
random track in the playlist.
If no "PHILIPS" playlist is created in the iPod/iPhone/iPad
or no track is stored in the playlist, you will wake to
your last listened track in the iPod/iPhone/iPad.
To activate or deactivate the alarm timer,
In standby mode, press TIMER repeatedly to
activate or deactivate the alarm.
» appears when the timer is activated.
Tip
If CD/USB/dock/DAB+ radio is selected as alarm
source and the audio cannot be played, FM tuner is
activated automatically.
Set the sleep timer
Note
Make sure that you have set the clock correctly.
When the unit is turned on, press SLEEP
repeatedly to select the sleep timer period (in
» When sleep timer is activated, is
displayed.
Tip
To deactivate the sleep timer, press SLEEP repeatedly
until [OFF]
Play from external audio
device
With this unit, you can play audio from an
external audio device like MP3 player.
1 Connect the supplied MP3 Link cable to
the MP3-LINK socket.
the headphone socket of an external
device.
2 Press USB/MP3 LINK repeatedly to select
MP3 link mode.
3 Play the external device (see the device's
Listen through the headphone
Plug a headphone into the socket on the unit.
19
English
EN
8 Product
information
Note
Product information is subject to change without prior
notice.
Rated Output
Power
2 X 10 W RMS
Frequency
Response
80 Hz - 16 kHz, ± 3 dB
Signal to Noise
Ratio
MP3 Link Input 0.5 V RMS 20 kohm
Disc
Laser Type Semiconductor
Disc Diameter 12 cm/8 cm
Support Disc CD-DA, CD-R, CD-RW,
MP3-CD, WMA-CD
Audio DAC 24 Bits/44.1 kHz
Total Harmonic
Distortion
Frequency Response 60 Hz - 16 kHz
S/N Ratio
Tuner (FM)
Tuning Range FM: 87.5 - 108 MHz
DAB+: 174.92 -
239.20 MHz
Tuning grid 50 KHz
Sensitivity
- Mono, 26dB S/N
Ratio
- Stereo, 46dB S/N
Ratio
<22 dBf
<43 dBf
Search Selectivity
Total Harmonic
Distortion
<3%
Signal to Noise Ratio
Number of presets
General information
AC power Model: AS360-120-
AD300;
Input: 100 - 240 V ~,
50/60 Hz, 1.2 A;
Output: 12 V 3 A
Operation Power
Consumption
30 W
Standby Power
Consumption
Dimensions
- Main Unit
400 x 235 x 98 mm
Weight
- With Packing
- Main Unit
3.9 kg
2.2 kg
USB playability information
Compatible USB devices:
memory cards (requires an additional card
Supported formats:
variable bit rate
WMA v9 or earlier
20 EN
Directory nesting up to a maximum of 8
levels
Number of albums/ folders: maximum 99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
Unsupported formats:
Empty albums: an empty album is an album
is not be shown in the display.
played.
Supported MP3 disc formats
ISO9660, Joliet
Maximum title number: 999 (depending on
Maximum album number: 99
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
variable bit rates
9 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
Ensure that the AC power plug of the unit
is connected properly.
Ensure that there is power at the AC
outlet.
To save power, the system switches off
automatically 15 minutes after track
play reaches the end and no control is
operated.
No sound or poor sound
Adjust the volume.
Disconnect the headphones.
No response from the unit
Disconnect and reconnect the AC power
plug, then turn on the unit again.
As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
Remote control does not work
select the correct source with the remote
control instead of the main unit.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities (+/–
21
English
EN
Replace the battery.
Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at
the lens has cleared.
Replace or clean the disc.
device has exceeded a certain limit. This
phenomenon is not a malfunction.
supported.
USB device not supported
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
Increase the distance between the unit and
your TV or VCR.
Fully extend the FM antenna.
Timer does not work
Set the clock correctly.
Switch on the timer.
Clock/timer setting erased
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
10 Notice
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
This product complies with the radio
interference requirements of the European
Community.
This product complies with the requirements
of the following directives and guidelines:
2004/108/EC + 2006/95/EC
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
negative consequences for the environment and
human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
22 EN
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
equipment.
The making of unauthorized copies of copy-
protected material, including computer
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
“Made for iPod,” “Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
iPod, iPhone, or iPad, respectively, and has
Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect
wireless performance.
iPod and iPhone are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad
is a trademark of Apple Inc.
This apparatus includes this label:
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
DCB2070_10_UM_V2.1