Philips DCW8010/10 User Manual
Displayed below is the user manual for DCW8010/10 by Philips which is a product in the Home Audio Systems category. This manual has pages.
Related Manuals
www.philips.com/welcome
User manual
Register your product and get support at
DCW8010
3EN
Contents
1 Important 4
Safety 4
Notice 5
2 Your wireless music system with
AirPlay 8
Introduction 8
What's in the box 8
What else you need 9
Overview of the main unit 10
Overview of the remote control 12
3 Before use 14
Connect the FM antenna 14
Connect power 14
Install/replace the remote control
batteries 14
4 Get started 16
Turn on 16
Switch modes 16
Set the clock 16
5 Connect to your home Wi-Fi
network 17
Method 1: Use iOS 5 Wi-Fi network
login sharing 17
Method 2: Connect to a WPS router 18
Method 3: Connect to a non-WPS
router 19
6 Stream audio by AirPlay 25
Stream audio from your iTunes music
library 25
Control play 27
Use advanced sound settings 27
7 Use the dock 28
Compatible iPod/iPhone/iPad models 28
Enjoy audio through the dock 28
Charge your iPod/iPhone/iPad 29
Undock your iPod/iPhone 29
8 Listen to FM radio 30
Tune to an FM radio station 30
Program radio stations automatically 30
Program radio stations manually 30
Tune to a preset radio station 30
Display RDS information 31
9 Play 32
Play a disc 32
Play from a USB storage device 32
Control play 33
10 Other features 34
Set alarm timer 34
Set sleep timer 34
Listen to an external audio device 34
Listen through headphone 35
11 Adjust sound 36
Adjust volume level 36
Mute sound 36
Adjust default sound settings 36
12 Adjust system settings 37
38
14 Product information 40
USB playability information 41
Supported MP3 disc formats 41
RDS program types 41
15 Troubleshooting 42
4EN
1 Important
Safety
Information for Europe:
Know these safety symbols
The 'exclamation mark' calls attention to
features for which you should carefully read the
supplied literature to prevent operating and
maintenance problems.
The 'lightening bolt' symbol indicates
uninsulated components within the product
that can cause an electric shock.
not expose the product to rain or moisture and
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this product near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not remove the casing of this product.
i Only use this product indoors. Do
not expose the product to dripping /
splashing water, rain or high humidity.
j Keep this product away from direct
k Do not install near any heat sources
such as radiators, heat registers, stoves,
or other electrical equipment (including
l Do not place any other electrical
equipment on the product.
m Do not place any sources of danger
on the product (e.g. objects containing
n This product may include batteries. Please
refer to safety and disposal instructions
for batteries in this user manual.
o Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
Never remove the casing of this apparatus.
Never lubricate any part of this apparatus.
Never place this apparatus on other electrical
Ensure that you always have easy access to the power
the power.
Risk of overheating! Never install this apparatus
at least four inches around this apparatus for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on this
apparatus.
5EN
Hearing safety
Listen at a moderate volume.
Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that may
even for exposure less than a minute. The
higher decibel ranges are offered for those
that may have already experienced some
hearing loss.
Sound can be deceiving. Over time your
hearing 'comfort level' adapts to higher
volumes of sound. So after prolonged
be loud and harmful to your hearing. To
level before your hearing adapts and leave
it there.
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can
distortion.
Listen for reasonable periods of time:
hearing loss.
and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that
you can't hear what's around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations.
Notice
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
Compliance
This product complies with the radio
Community.
The device can be operated in the EU without
outdoors in France in the whole of the band
until further notice.
the 1999/5/EC directive.
This apparatus includes this label:
6EN
Class II equipment symbol:
no protective earth provided.
Care of the environment
Your product is designed and manufactured
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
is covered by the European Directive 2002/96/
EC.
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
human health.
Your product contains batteries covered by
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
polystyrene foam (buffer) and polyethylene
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
Information about the use of batteries:
Caution
Do not mix new and used batteries. Do not mix
different brands of batteries. Observe correct polarity.
Remove batteries from products that are not in use for
a longer period of time. Store batteries in a dry place.
Risk of injury: Wear gloves when handling leaking
batteries. Keep batteries out of reach of children and
pets.
Risk of explosion: Do not short circuit batteries. Do
not expose batteries to excessive heat. Do not throw
batteries. Do not recharge non-rechargeable batteries.
Risk of swallowing batteries: The product/remote
swallowed. Keep the battery out of reach of children
at all times!
Trademark notice
7EN
Apple performance standards. Apple is not
responsible for the operation of this device
or its compliance with safety and regulatory
standards. Please note that the use of this
wireless performance.
countries. iPad is a trademark of Apple Inc.
mark of the Wi-Fi Alliance.
Copyright
The making of unauthorized copies of copy-
copyrights and constitute a criminal offence.
purposes.
2012 © Koninklijke Philips Electronics N.V.
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Note
The type plate is located on the back of the system.
8EN
2 Your wireless
music system
with AirPlay
at www.philips.com/welcome.
model and serial number of this product. The
model number and serial number are on the
back of the main unit. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Introduction
With this system, you can:
stream audio from an iTunes music library
You can enrich sound output with these sound
effects:
Digital sound control (DSC)
Dynamic bass boost (DBB)
Full sound control
Playable media:
Discs
WMA-CD
USB storage device
Class support: MSC (Mass Storage
Class)
Maximum number of albums/folders:
99
Maximum level of directory: 8
iPad 2 and iPad
generations)
generations)
Compatible iTunes host devices for AirPlay:
A Wi-Fi enabled PC/Mac with iTunes 10 or
the following iPod/iPhone/iPad models with
iOS 4.3 or later
iPad 2 and iPad
generations)
What's in the box
Check and identify the contents of your
package:
Main unit
Remote control and two AAA batteries
FM antenna
Wi-Fi antenna
AC power adaptor
Plug converter for AC power adaptor X 2
CD-ROM (for user manual)
Quick start guide
9EN
What else you need
iOS 4.3 (or later) or a Wi-Fi enabled PC/
Mac with iTunes 10 (or later) installed on.
10 EN
Overview of the main unit
j
i
k
abc
defgh
lm
pq
n o
r
11EN
a
Turn on the system.
Switch the system to eco power
standby mode or normal standby
mode.
b SOURCE
Press repeatedly to select a source.
c
d
Stop the play of music.
Access the playlist of a docked iPod/
iPhone.
e Disc compartment
f
Press to eject the disc from the disc
compartment.
g /
Skip to the previous or next track.
Press and hold to search within a track.
Tune to a radio station.
h VOL+/VOL-
Increase or decrease the volume level.
i Dock for iPod/iPhone/iPad
Connect to a compatible iPod/iPhone/
iPad.
j IR sensor
Receive infrared signals from the
remote control.
k VFD screen
l MP3-LINK
Connect to the audio output socket
(usually the headphone socket) of an
external device.
m WIFI SETUP
Press to activate the setup of
connection to a non-WPS router or an
iPod touch/iPhone/iPad with iOS 5.X.
Press to activate the setup of
connection to a WPS router.
more than 3 seconds to reset Wi-Fi
settings.
n
Connect to a USB storage device.
o
Connect to a headphone with 3.5-mm
connector.
p DC IN
Connect to the AC power adaptor.
q Wi-Fi antenna
Fix the Wi-Fi antenna to the main unit
for better emission and reception of
Wi-Fi signals.
r FM ANT
Connect to the FM antenna.
12 EN
Overview of the remote
control
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
a
Turn on the system.
Switch the system to eco power
standby mode or normal standby
mode.
b AirPlay
Switch the source to audio input that
is streamed from your iTunes library
by AirPlay.
c CD
Switch the source to disc.
d PRESET/ALBUM /
Skip to the previous or next album.
Select a preset radio station.
Navigate through iPod/iPhone playlist.
e /
Skip to the previous or next track.
Press and hold to search within a track.
Tune to a radio station.
f USB
Switch the source to USB storage
device.
g RDS/DISPLAY
Synchronize the clock with an RDS
radio station that transmits time signals.
Display the current status or media
information.
h
Mute or restore volume.
i PROG/CLOCK
Program radio stations.
Set the clock.
j SLEEP /SNOOZE
Set the sleep timer or alarm timer.
k SOUND
l SETTINGS
Access the menu of system settings.
m REPEAT/SHUFFLE
Select a play mode.
n Numeric keypad
o VOL +/-
Increase or decrease the volume level.
p /MENU
Stop the play of music.
Access the playlist of iPod/iPhone.
13EN
q / DOCKING
Switch the source to the audio input
that is transferred through the dock.
r
s TUNER/MP3-LINK
Switch the source between FM tuner
or the audio input that is transferred
through the MP3-LINK socket.
14 EN
3 Before use
Connect the FM antenna
Note
This product does not support MW (medium wave)
radio reception.
Connect the FM antenna to the FM ANT
socket on the back panel.
Connect power
Caution
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the back
of the main unit.
Risk of electric shock! Before you plug the AC power
that you have completed all the other connections.
1
to the adaptor.
2 Connect the AC power adaptor to
the DC IN
and
the wall outlet.
Install/replace the remote
control batteries
Caution
1 Open the battery compartment.
15EN
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
Before you press any function button on the remote
control instead of the main unit.
If you do not use the remote control in a coming long
at the IR sensor on the front of the main unit.
16 EN
4 Get started
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Turn on
switches on automatically.
Wait for successful boot-up of the unit.
» The boot-up takes up to 35 seconds.
»
the middle of the WIFI SETUP button
blinks yellow.
»
LED indicator stays solid yellow.
Switch modes
Manually switch the modes:
Press and hold to switch this system to
eco power standby mode.
Press to switch this system
from working mode to normal standby
from eco power standby mode to
working mode.
Set the clock
Note
the system exits clock setting without saving earlier
operations.
1 PROG/
CLOCK to activate the clock setting.
» 24HOUR (24-hour time format) blinks.
2 Press / to select 24HOUR or
12HOUR
press PROG/CLOCK
» The hour digits blink.
» If you select 12HOUR as the time
PM or AM is displayed.
3 Press / repeatedly to set the
hour digits.
You can enter the digits with the
numeric keypad.
4 Press PROG/CLOCK
» The minute digits blink.
5 Press / repeatedly to set the
minute digits.
6 Press PROG/CLOCK
setting.
» The set clock is displayed.
Tip
You can also synchronize the system clock with an
RDS radio station that transmits time signals. (Refer to
"Listen to FM radio" > "Display RDS information" >
"Synchronize clock with RDS")
17EN
5 Connect to
your home Wi-
Fi network
To connect this system to your existing home
Wi-Fi settings to it.
Choose your best setup method based on the
preconditions listed below.
Precondition Setup method
You have an iPod touch/
iPhone/iPad upgraded
to iOS 5.0 or later.
Method 1
(recommended)
(see 'Method 1:
Use iOS 5 Wi-
Fi network login
sharing' on page 17)
Your Wi-Fi router is
enabled with WPS
(Wi-Fi Protected Setup)
and supports PBC (Push
Button Connection).
Method 2 (see
'Method 2: Connect
to a WPS router' on
page 18)
You have a Wi-Fi
enabled device with
such as an iPod touch/
iPhone/iPad or a Wi-Fi
enabled PC/Mac.
Method 3 (see
'Method 3: Connect
to a non-WPS
router' on page 19)
Before you connect this system to you home
Wi-Fi network, make sure that:
your Wi-Fi router is powered on and
working properly.
this system has been powered on and
booted up successfully (see 'Turn on' on
page 16).
remember your home Wi-Fi settings. Whenever
you can enjoy music streamed by AirPlay.
Method 1: Use iOS 5 Wi-Fi
network login sharing
1 Connect your iPod touch/iPhone/iPad to
your home Wi-Fi network.
2 Dock your iPod touch/iPhone/iPad to the
system (see 'Enjoy audio through the dock'
on page 28).
3 Press WIFI SETUP on the top panel.
» The following dialog box is displayed.
18 EN
4 Tap ALLOW (allow) to share your Wi-Fi
settings with this system.
5 Wait less than 1 minute until the light stops
Note
check the IP address of this system (see 'Adjust system
settings' on page 37). If the IP address is displayed as
"0.0.0.0" or "192.168.1.1
Method 2: Connect to a WPS
router
1 Press the WPS button on your home Wi-Fi
router.
2 WIFI SETUP on
the top panel.
» The LED indicator in the middle of
WIFI SETUP button blinks yellow and
green alternately.
»
the speaker beeps.
» The system is connected to your home
Wi-Fi network successfully.
WPS
WIFI SETUP
19EN
Tip
WPS
button for Wi-Fi connection or enable the WPS PBC
If the WIFI SETUP indicator on DCW8010 stays
Please wait for 2 minutes and try again. If the problem
Method 3: Connect to a non-
WPS router
To connect this system to a non-WPS Wi-Fi
router with a PC/Mac or iOS 4.3 iPod touch/
Wi-Fi settings.
Follow the steps below to complete the
connection.
1 Collect settings of your home Wi-Fi
router and write down on paper for use
(see 'Collect settings of your home Wi-Fi
router' on page 19).
2 Switch this system to Assisted Wi-Fi Setup
mode (see 'Switch this system to Assisted
Wi-Fi Setup mode' on page 20).
» A new Wi-Fi network is created by this
of Philips DCW8010 XXXXXX.
3 Connect your Wi-Fi enabled device to the
created new Wi-Fi network temporarily
(see 'Connect your Wi-Fi enabled device
to the newly created Wi-Fi network' on
page 20).
4 Open the built-in web page of this system
with the internet browser of your Wi-Fi
enabled device (see 'Open the built-in web
page of this system' on page 22).
5 Change the internal Wi-Fi settings of this
system based on the settings that you
wrote down on paper at step 1 (see
'Change the internal Wi-Fi settings of this
system' on page 23).
6 Restore your Wi-Fi enabled device back
to your existing home Wi-Fi settings (see
'Restore your Wi-Fi enabled device back
to your existing home Wi-Fi setting' on
page 24).
Collect settings of your home Wi-Fi
router
Note
Always consult the user manual of your home Wi-Fi
router for detailed instructions.
1 Connect your Wi-Fi enabled device to
your existing home Wi-Fi network.
2
Apple Safari or Microsoft Internet
Explorer) on your Wi-Fi enabled device.
3
home Wi-Fi router.
4 Find the Wi-Fi settings tab and write down
the following information on paper:
A Network name (SSID)
B
WPA or WPA2 if enabled)
C Wi-Fi password (if Wi-Fi security is
enabled)
D DHCP mode (enabled or disabled)
E Static IP address settings (if DHCP
mode is disabled)
20 EN
Switch this system to Assisted Wi-Fi
Setup mode
Note
sure that the system has been booted up successfully
(see 'Turn on' on page 16).
Press WIFI SETUP on the top panel.
» The LED indicator in the middle of
WIFI SETUP button stays solid yellow.
» A new Wi-Fi network is created
name (SSID) of Philips DCW8010
XXXXXX.
» It takes up to 45 seconds for successful
creation of this new Wi-Fi network.
Note
this new Wi-Fi network disappears.
successful boot-up.
Make sure that no other Philips AirPlay-enabled devices
are in Assisted Wi-Fi Setup mode at the same time.
Multiple new Wi-Fi networks created this way may
interfere with each other.
hold WIFI SETUP for more than 3 seconds to reset
Wi-Fi settings. Then follow the previous steps to change
your network settings.
Connect your Wi-Fi enabled device to
the newly created Wi-Fi network
The new Wi-Fi network created by this system
only allows access of one Wi-Fi enabled device.
To avoid interference from any other Wi-Fi
disable the Wi-Fi function on your other Wi-Fi
devices.
Option 1: Use your iPod touch/iPhone/iPad
1 Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
2 Select Philips DCW8010 XXXXXX from
the list of available networks.
Philips DCW8010 XXXXXX
21EN
3 Wait until successful Wi-Fi connection on
your iPod touch/iPhone/iPad.
» is displayed at the upper left corner
of your iPod touch/iPhone/iPad.
Tip
If Philips DCW8010 XXXXXX
scan the available Wi-Fi networks again.
Option 2: Use your Wi-Fi enabled PC/Mac
Note
See the user manual of your PC/Mac for how to
connect your PC/Mac to a Wi-Fi network.
network cable to your PC/Mac.
1 Open the Wi-Fi setup tool or control
panel on your PC/Mac.
2 Scan the available Wi-Fi networks.
3 Select Philips DCW8010 XXXXXX from
the list of available networks.
4 Wait until successful Wi-Fi connection on
your PC/Mac.
Tip
If Philips DCW8010 XXXXXX
scan the available Wi-Fi networks again.
DCW8010
DCW8010
22 EN
Open the built-in web page of this
system
1 Launch Apple Safari browser or any other
internet browser on your Wi-Fi enabled
device.
2 Type in 192.168.1.1 at the browser
»
displayed.
If you use Safari on your Wi-Fi enabled PC/
Mac, you can also select 'Philips DCW8010
XXXXXX' from the Bonjour pull-down list to
1 Click -> Preferences.
» The Bookmarks menu is displayed.
192.168.1.1
Philips DCW8010 XXX
2 Tick Include Bonjour for Bookmarks bar.
3 Select 'Philips DCW8010 XXXXXX'
from the Bonjour pull-down list shown at
the bookmarks bar.
»
displayed.
23EN
Change the internal Wi-Fi settings of
this system
you can change the internal Wi-Fi settings for
connection of this system to your existing home
Wi-Fi network.
Note
page match your home Wi-Fi network settings that you
wrote down on paper.
Follow the on-screen instructions to
settings.
»
middle of WIFI SETUP button stops
main unit beeps.
» This system is connected to your
existing home Wi-Fi network
successfully.
Note
If the LED indicator in the middle of WIFI SETUP
Wi-Fi connection has failed. Reboot your Wi-Fi router
is connected to your Wi-Fi network. If the problem
disappears.
Tip
system in Advanced settings -> AirPlay Device Name
to distinguish this system from other Philips AirPlay-
enabled devices in your house.
If you want to enter the network name (SSID) manually
Advanced settings -> CONFIGURE MANUALLY on
hold WIFI SETUP for more than 3 seconds to reset the
Wi-Fi setting. Then follow the previous steps to change
your network settings.
24 EN
Restore your Wi-Fi enabled device back
to your existing home Wi-Fi setting
Note
Make sure that the settings at steps 2 to 3 below match
your home Wi-Fi network settings you wrote on paper.
1 Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
Or open the list of available Wi-Fi
networks on your PC/Mac.
2 Select your network name (SSID) from the
list of available wireless networks.
3
4 Wait until successful Wi-Fi connection to
your home Wi-Fi network.
25EN
6 Stream audio by
AirPlay
Stream audio from your
iTunes music library
Note
Make sure that your iTunes host device is connected
to the same Wi-Fi network as this system. Your iTunes
device can be an iPod touch/iPhone/iPad installed with
iOS 4.3 (or later) or a Wi-Fi enabled PC/Mac installed
with iTunes 10 (or later).
For iPhone 4S users: To ensure optimal performance
5.1 or later.
Stream from your iPod touch/iPhone/
iPad
1 Launch the iPod/Music application on your
iPod touch/iPhone/iPad.
2 Tap on the AirPlay icon.
3 Select Philips DCW8010 XXXXXX (or
user customized name) from the AirPlay
list.
Philips DCW8010 XXXXXX
26 EN
4
»
this system.
Note
the following on your iPod touch/iPhone/iPad:
(1) Disconnect and then re-connect to the same Wi-Fi
router again;
(2) Close all applications running at the background;
(3) Power off and then power on your iPod touch/
iPhone/iPad again.
Stream from your PC/Mac
1 Launch iTunes 10 (or a later version) on
your PC/Mac.
2 Click the AirPlay icon on the window.
3 Select Philips DCW8010 XXXXXX (or
user customized name) from the AirPlay
list.
4
»
this system.
27EN
Tip
When you stream audio from your iTunes music library
enabled devices (if available) at step 3 to stream music
to all of them at the same time.
icon may be instead of .
Control play
You can select different play options from either
your iTunes host device or this system.
Note
Make sure that you have successfully streamed audio
from your iTunes music library to this system.
.
/ .
VOL +/-
repeatedly.
.
press AirPlay.
Tip
Allow iTunes audio control from remote speakers
in Edit (for Windows) or iTunes (for Mac) ->
Preferences... -> Devices.
Use advanced sound settings
If your iTunes host device is an iPod touch/
iPhone/iPad:
For advanced sound settings and additional
iPad to download the Philips SoundStudio
application from Apple App Store. It is a free
application from Philips.
If your iTunes host device is a Wi-Fi enabled
PC/Mac:
View ->
Show Equalizer).
Tip
See the iTunes help documentation for more details.
28 EN
7 Use the dock
You can enjoy audio from iPod/iPhone through
this system.
Note
No audio output from the headphone socket in this
situation.
Compatible iPod/iPhone/iPad
models
and iPad models.
iPad 2 and iPad
generations)
generations)
Enjoy audio through the dock
Note
The peak current through the dock connector is limited
iPad 2. To avoid damage to your iPod/iPhone/iPad and
indicated.
1 Press SOURCE repeatedly to switch the
source to iPod_iPhone_iPad.
You can also press DOCKING to
switch the source.
2 Push the dock tray to eject it.
3 Connect your iPod/iPhone/iPad to the
dock.
4 Play a track on your iPod/iPhone/iPad.
Buttons Functions
MENU/ Access the playlist of iPod/iPhone.
/ Navigate through the playlist of
iPod/iPhone.
/ Skip to the previous/next track.
Press and hold to rewind or
search forward fast.
29EN
Charge your iPod/iPhone/iPad
Once the iPod/iPhone/iPad is docked and
Undock your iPod/iPhone
Note
Risk of damage to the dock or your iPod/iPhone: Do
not twist or shake your iPod/iPhone/iPad.
1 Pull the iPod/iPhone/iPad out of the dock.
2 Push the dock tray inwards until you hear a
"click" to store it.
30 EN
8 Listen to FM
radio
Tune to an FM radio station
Note
Make sure that you have connected and fully extended
the FM antenna.
1 Press SOURCE or TUNER/MP3-LINK
repeatedly to switch the source to FM
tuner.
» FM
displayed.
2 Press and hold / until SEARCH -/
SEARCH + is displayed.
» The FM tuner tunes to a station with
strong reception.
/ repeatedly
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio
stations.
Press and hold PROG/CLOCK until AUTO
SRH (automatic search) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
»
broadcast automatically.
Program radio stations
manually
Note
You can program a maximum of 20 preset radio
stations.
1 Tune to a radio station.
2 Press PROG/CLOCK to activate
programming.
» PXX
number) blinks.
3 Press /
and then press PROG/CLOCK
»
displayed.
4 Repeat steps 1-3 to program more
stations.
Tune to a preset radio station
Press /
number of that preset radio station.
keypad.
31EN
Display RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information.
1 Tune to an RDS radio station.
2 Press DISPLAY/RDS repeatedly to scroll
through available information:
Station name
Program type such as NEWS
SPORTPOP M (pop music)...
Text messages
RDS clock
Synchronize clock with RDS
You can synchronize system clock with an RDS
radio station.
1 Tune to an RDS radio station that
transmits time signals.
2 Press and hold DISPLAY/RDS until CT
SYNC is displayed.
» The system reads RDS time
automatically.
» NO CT is
displayed.
Note
The accuracy of the clock depends on the RDS radio
station.
32 EN
9 Play
Play a disc
Caution
Never insert any object other than a disc of 12-cm
diameter into the disc compartment.
1 Press SOURCE repeatedly to switch the
source to DISC.
You can also press CD to switch the
source.
2 Insert a disc into the disc compartment
with the printed side facing you.
» Play starts automatically after a few
seconds.
Press to start play.
Play from a USB storage
device
are copied onto a supported USB storage
device:
Flash drive
Memory card reader
HDD: hard disc drive (This product can
detect only a portable HDD with USB
power peak current no more than 500
mA.)
Note
Philips does not guarantee compatibility with all USB
storage devices.
supported.
1 Connect the USB storage device to the
socket.
2 Press SOURCE repeatedly to switch the
source to USB.
You can also press USB to switch the
source.
» Play starts automatically.
If play does not start automatically,
1 Press / to select a folder.
2 Press /
3 Press to start play.
33EN
Control play
Buttons Functions
Pause or resume play.
Stop play.
/ Skip to the previous or next track.
Press and hold to rewind a track or search forward fast within a track.
/ Skip to the previous or next album when one or more album exit.
Enter the number of a track to play it.
REPEAT/SHUFFLE Select an available play mode.
RPT 1: repeat the current track
RPT ALL: repeat all tracks
SHUFFLE: (press and hold to) play tracks randomly
NORMAL
34 EN
10 Other features
Set alarm timer
You can use this system as an alarm clock.
Note
Make sure that you have set the clock correctly.
1
SLEEP/SNOOZE until DISC blinks.
2 Press / repeatedly to select an
alarm source.
3 Press SLEEP/SNOOZE
» The hour digits blink.
4 Press / repeatedly to set
SLEEP/
SNOOZE
» The minute digits blink.
5 Press /
and then press SLEEP/SNOOZE to
» A (alarm) and the current time is
displayed.
SLEEP/
SNOOZE in normal standby mode.
SLEEP/SNOOZE repeatedly in
normal standby mode until A (alarm)
disappears.
SLEEP/SNOOZE repeatedly in normal
standby mode until A (alarm) is
displayed.
SLEEP/
SNOOZE
alarm sounds again.
SLEEP/SNOOZE until ALM STOP is
displayed.
Tip
you can set the hour/minute digits by the numeric
keypad.
Set sleep timer
SLEEP/SNOOZE
or 120 minutes).
SLEEP/
SNOOZE repeatedly until SLEEPOFF is
displayed.
Listen to an external audio
device
1 Press TUNER/MP3-LINK repeatedly to
switch the source to MP3 LINK.
2 Connect an MP3 Link cable to
the MP3-LINK socket on the top
the headphone socket on the external
3 Play the external device. (See the user
manual of external device).
35EN
Listen through headphone
Plug a headphone with 3.5-mm plug into the
socket on the top panel.
Note
No audio output from the headphone socket when
you play the playlist of a docked iPod/iPhone/iPad.
Listen through the speakers instead.
36 EN
11 Adjust sound
The following operations are applicable to all
supported media.
Adjust volume level
VOL +/-
repeatedly.
VOL+/VOL-
repeatedly.
Mute sound
Press to mute or restore the sound.
Adjust default sound settings
1 Press SOUND repeatedly to select one of
the setting menus.
DSC
DBB: Select a DBB sound effect or
disable it.
FULL SOUND: Enable to enjoy full-
range sound output.
2 Press / to select an option.
37EN
12 Adjust system settings
1 Press SETTINGS to access the menu of system settings.
» WIFI is displayed.
2 Press / to select a menu option.
WIFIIP ADDRDIMMERNET RSTFAC RSTVERSION
3 Press to view system status or change system settings.
.
Menu
Option
Function Remarks
WIFI Display the status of connection
between this system and your home
Wi-Fi network.
Select WIFI and then press .
IP ADDR Display the IP address of this system in
your home Wi-Fi network.
Select IP ADDR .
DIMMER Select a brightness level of VFD screen. 1) Select DIMMER .
2) Press / to select a bright level.
NET RST Reset the network connection. 1) Select NET RST.
2) Press twice to start resetting.
FAC RST Reset this system to factory default
settings.
1) Select FAC RST.
2) Press twice to start resetting.
VERSION 1) Select VERSION .
2) Press / to select a version name.
3) Press to display the current version.
38 EN
13 Update
firmware
Please register your product at www.philips.
com/welcome for information about the latest
Note
!
1
support.
2
3
www.philips.com/support
XXXX
XXXX. zip
"
Warning
Make sure that the power is not interrupted during
Note
If you use an internet browser other than Apple Safari
this system. See the user manual of your Wi-Fi router
connected to the Wi-Fi router.
1 Power on this system (see 'Turn on' on
page 16).
» It takes up to35 seconds for the
the LED indicator in the middle of the
WIFI SETUP button blinks yellow.
»
and the LED indicator stays solid
yellow. This system is connected to
automatically.
2 Make sure that this system and your PC/
Mac are connected to the same Wi-Fi
router.
3 Open Apple Safari
then select 'Philips DCW8010 XXXXXX'
(or the customized device name) from the
Bonjour pull-down list.
Or open another internet browser on
address of this system (available on the
address bar.
»
system is displayed.
4 Follow the on-screen instruction to
39EN
Note
procedures again.
network for this system again (see 'Connect to your
home Wi-Fi network' on page 17).
40 EN
14 Product
information
Note
Product information is subject to change without prior
notice.
#
$
Rated output power 40 W
Signal-to-noise ratio
MP3 LINK input
Disc
Laser type Semiconductor
Disc diameter 12 cm
Support discs
WMA-CD
Audio DAC 24 Bits / 44.1 kHz
Total harmonic
distortion
< 1%
Tuner
Tuning Range FM: 87.5 - 108 MHz
Tuning grid 50 KHz
Sensitivity
Ratio
<22 dBu
<45 dBu
Search Selectivity <30 dBu
Total Harmonic
Distortion
<3%
Signal to Noise Ratio >45 dB
Speakers
Speaker Impedance 8 Ohm
Speaker Driver 2 X 2.75" full range
speaker
Sensitivity > 82 dB/m/W
Wireless
Wireless standard 802.11b/g
Wireless security
WPA/WPA2 (8-63
characters)
2412 - 2462 MHz (CH1-
/97)
2412 - 2472 MHz (CH1-
PBC (one button
push)
Ye s
General
AC power input
2.0 A
Output of AC-DC
power adaptor
18.0 V
Model No. of AC-
DC power adaptor
EFS05001800280CE
Trademark of AC-
DC power adaptor
PHILIPS
Operation power
consumption
25 W
Power consump-
tion at standby
mode
< 6 W
Power consump-
tion at eco power
standby mode
< 0.5 W
Dimensions
(W x H x D)
500 x 234 x 164 mm
Net weight 3.1 kg
41EN
USB playability information
Compatible USB devices:
USB1.1)
card reader to work with this unit)
Supported formats:
MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
WMA v9 or earlier
Directory nesting up to a maximum of
8 levels
Number of albums/ folders: maximum
99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
Empty albums: an empty album is an
album that does not contain MP3/
the display.
ignored and not played.
Supported MP3 disc formats
Maximum title number: 512 (depending on
Maximum album number: 255
variable bit rates
RDS program types
NO TYPE No RDS programme type
NEWS News services
AFFAIRS Politics and current affairs
INFO Special information programs
SPORT Sports
EDUCATE Education and advanced training
DRAMA Radio plays and literature
CULTURE
SCIENCE Science
VARIED Entertainment programs
POP M Pop music
ROCK M Rock music
MOR M Light music
Light classical music
CLASSICS Classical music
OTHER M Special music programs
WEATHER Weather
FINANCE Finance
CHILDREN Children’s programs
SOCIAL Social Affairs
Religion
PHONE IN Phone In
TRAVEL Travel
LEISURE Leisure
COUNTRY Country Music
NATION M National Music
OLDIES Oldies Music
FOLK M Folk Music
DOCUMENT Documentary
TES Alarm Test
ALARM Alarm
42 EN
15 Troubleshooting
Warning
Never remove the casing of this product.
available.
Problem Solution
No power. Make sure that the power adaptor is securely connected to both the
power supply and the CD sound machine.
Make sure that there is power at the AC outlet.
No sound or poor sound. Adjust the volume.
Disconnect the headphones.
Make sure that you have select the correct audio source.
the network connection between the host and your Wi-Fi router is
the Wi-Fi connection between this system and your Wi-Fi router is
available.
No response from the system. Reconnect the power adaptor and wait about 35 seconds for this
system to boot-up.
Remote control does not
work.
the remote control instead of the main unit.
Reduce the distance between the remote control and the main unit.
Insert each battery with its polarity (+/– signs) aligned as indicated.
Replace the batteries.
Aim the remote control directly at the sensor on the front panel of
the main unit.
No disc is detected.
Make sure that the label of the disc faces you.
Wait until the moisture condensation at the lens is cleared.
Replace or clean the disc.
supported.
USB storage device is not
supported.
Make sure that the USB storage device is compatible with the system.
Try another one.
43EN
Problem Solution
USB storage device.
Radio reception is poor. Increase the distance between the system and other electrical
appliances.
Fully extend the antenna and adjust its position.
Connect an outdoor FM antenna instead.
Timer does not work. Set the clock correctly.
Switch on the timer.
Clock/timer setting is erased. Power is interrupted or cut off.
Reset the clock/timer.
Wi-Fi network connection
failed.
802.11b/g mode. This system does not support connection to routers
with 802.11n only.
This system does not support the WPS-PIN method.
If your Wi-Fi router supports WPS and the WPS-PBC method but
indicated in this user manual (see 'Method 3: Connect to a non-WPS
router' on page 19).
Enable SSID broadcast on the Wi-Fi router.
Keep away from potential sources of interference which may affect
your PC is using a Wi-Fi network. You cannot use Ethernet Wi-Fi
connection for AirPlay network setup.
make sure that the SSID name of your home router consists of
%/#?* inserted.
If you renamed the AirPlay device 'Philips DCW8010 XXXXXX' in
be created automatically when you use WPS for connection. Always
change the default network name (SSID) to a simple one that consists
to secure your network.
44 EN
Problem Solution
Occasional breaking of AirPlay
music streaming
Do one or all of the following:
Move this system closer to your Wi-Fi router.
Keep the space between this system and your Wi-Fi router clear of
any obstacle.
Do not use Wi-Fi channel that is overlapped by the nearby Wi-Fi
network.
Check whether your network speed is fast enough (in cases where
may be affected). Turn off the other devices connected to your
home router.
Enable the Quality of Service (QoS) option (if available on the Wi-
Fi router).
Turn off other Wi-Fi routers.
No AirPlay icon on my iTunes
host device.
Make sure that this system is already connected to your home Wi-Fi
network.
service in your PC. Take Windows XP for example: to enable the
Start -> Control PanelAdministrative
Tools -> Services -> Bonjour ServiceStart followed
by OK on the pop-up menu.
AirPlay connection failed with
Mac or PC
is blocks the ports that AirPlay uses to stream content. See the help
unblock the ports used by AirPlay.
Video streaming or FTP downloads may overload your router and
therefore may cause interruptions during AirPlay music play. Try to
reduce the load your router.
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
DCW8010_10_UM_V1.3