Philips FS484F User Manual
Displayed below is the user manual for FS484F by Philips which is a product in the Floor Lighting category. This manual has pages.
Related Manuals
Philips Lighting
www.philips.com 4422 004 15931
04/15
Printed in the Netherlands
Data subject to change
SmartBalance Free floor standing
‹
Instrucciones de montaje
Instruções de montagem
Monteringsinstruktioner
Monteringsvejledning
Kokoonpano- ja kiinnitysohjeet
Montaj yönergesi
Instrukcja montazu
Szerelési utasítások
Návod k montázi
Návod k montázi
Instructions de montage
Montageanleitung
Montage instruktie
Istruzioni di montaggio
FS484F LED45S/830 PSD-T MLO
FS484F LED45S/830 PSD-T MLO ACL
FS484F LED113S/830 PSD-T MLO SW
FS484F LED113S/830 PSD-T MLO ACL
FS484F LED45S/840 PSD-T MLO
FS484F LED45S/840 PSD-T MLO ACL
FS484F LED118S/840 PSD-T MLO SW
FS484F LED118S/840 PSD-T MLO ACL
Installation instructions
IK 02 650O C
FS484F LED45S 16.5 10 40 40 o 2.5
FS484F LED45S ACL 16.6 10 40 40 o 2.5
FS484F LED113S SW 16.9 10 40 40 o 2.5
FS484F LED113S ACL 16.9 10 40 40 o 2.5
FS484F LED118S SW 16.9 10 40 40 o 2.5
FS484F LED118S ACL 16.9 10 40 40 o 2.5
Main dimensions (mm)
Cable lenght
(m)
ACL = ActiLume
FS484F SW
Operation
Switch on luminaire Briey press lower/upper key
Switch off luminaire Briey press lower/upper key
Manually adjust illuminance Press and hold lower/upper key
Dimming (1-100%) Until the desired level is set
Operation
Switch on luminaire Briey press key
Switch off luminaire Briey press key
Manually adjust illuminance Press and hold key
Dimming (1-100%) Until the desired level is set
FS484F SmartBalance Free oor standing
Inrush Current Peak 50 (max) A
Mains current pulse time half peak 2ms
Earth leakage current 0,7 (max) mA
Max luminaires on MCB (16A type B) 10 max
Number of luminaires connected to
one 30mA residual current detector 10 max
Inrush current
1 mains (A)
1 max
max/2
Tr e f
1 nom.
Time (us)
Maintenance instructions
To assure the lighting quality of this unique LED lighting concept there are only a few
instructions regarding the maintenance of this luminaire:
Do not touch electronic components!
Electronic components are under high voltage.
Electronic components are ESD sensitive.
During installation or when maintaining the luminaire
always use static free gloves to avoid marks on the luminaire.
To remove dirt and spots use the following:
o Dust: only use micro ber cloths
o Fingerprints, etc.: use a cleaner for
synthetic materials with antistatic properties.
Do not stare into the LED light beam.
This luminaire should not be used for illumination during building activities due to
dirt and dust contamination.
FS484F and FS484F ACL