Philips HTS5100B/F7 User Manual
Displayed below is the user manual for HTS5100B/F7 by Philips which is a product in the Home Cinema Systems category. This manual has pages.
Related Manuals
Register your product and get support at BDP7200
BDP7200
Register your product and get support at
www.philips.com/welcome
BDP5010
STOP
ARRÊT
ALTO
1-866-309-0866
1-866-309-0866
1-866-309-0866
Introduction Connections Basic Setup Playback Function SetupRadio Tuning Others
Register your product and get support at
www.philips.com/welcome HTS5100B
EN BLU-RAY DISC HOME THEATER
© 2009 P&F USA, Inc.
EN2
PRECAUTIONS
Safety Instructions
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modications to this equipment may
cause harmful interference unless the modications are expressly approved in the manual. The user could lose the
authority to operate this equipment if an unauthorized change or modication is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Disconnect the mains plug to shut o when nd trouble or not in use. The mains plug shall remain readily operable.
The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference. Serial No.:
Model No.:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The lightning ash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated“dangerous voltage”within the
product’s enclosure that may be of sucient magnitude
to constitute a risk of electric shock to persons.
The important note and rating are located on the rear or bottom of the cabinet.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacture’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specied by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
3
PRECAUTIONS
EN
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING:
Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, re, or the like.
LASER SAFETY
This apparatus employs a laser. Only a qualied service person should remove the cover or attempt to service this
apparatus, due to possible eye injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those specied herein may
result in hazardous radiation exposure.
CAUTION: Visible and invisible laser radiation when open and inter lock defeated. Do not stare into beam.
LOCATION: Inside, near the deck mechanism.
IMPORTANT COPYRIGHT INFORMATION
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates
copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this
copyright protection technology must be authorized by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.
Products that have earned ENERGY STAR®are designed to protect the environment
through superior energy eciency.
To Avoid the Hazards of Electrical Shock and Fire
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
Do not put your ngers or objects into the unit.
Location and Handling
Do not install the unit in direct sunlight, near strong magnetic elds, or in a place subject to dust or strong vibration.
Avoid a place with drastic temperature changes.
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Dew Condensation Warning
Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few
hours until its inside gets dry.
- The unit is moved from a cold place to a warm place.
- Under conditions of high humidity.
- After heating a cold room.
Note about Recycling
This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local
regulations concerning chemical wastes.
Notice for Progressive Scan Output
Consumers should note that not all high denition television sets are fully compatible with this product and may
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,
it is recommended that the user switch the connection to the ‘standard denition’ output. If there are questions
regarding your TV set compatibility with this 525p(480p) BD/DVD player, please contact our customer service center.
•
•
•
•
•
•
•
•
•
•
•
•
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
4
PRECAUTIONS
EN
Servicing
• Please refer to relevant topics on “TROUBLESHOOTING”
on page 49 before returning the product.
• If you need to call a customer service representative,
please know the model number and serial number of
your product before you call. This information is
displayed on the back of the product. Also, please take a
moment to identify the problem you are having, and be
prepared to explain this to the representative. If you
believe the representative will need to help you with
operations, please stay near the product. Our
representatives will be happy to assist you. For online
reference, please visit our web site at
http://www.philips.com/welcome
Cleaning the cabinet
• Wipe the front panel and other exterior surfaces of the
unit with a soft, slightly damp cloth.
• Never use a solvent, thinner, benzene or alcohol to clean
the unit. Do not spray insecticide liquid near the unit.
Such chemicals may discolor the surface or damage the
unit.
Cleaning discs
• When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
Cleaning the disc lens
• If this unit still does not perform properly although you
refer to the relevant sections and to
“TROUBLESHOOTING” in this user manual, the laser
optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and cleaning
of the laser optical pickup unit.
Disc handling
• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not
used.
• Note that discs with special shapes (heart-shaped discs,
octagonal discs, etc.) cannot be played back on this unit.
Do not attempt to play such discs, as they may damage
the unit.
Maintenance Supplied Accessories
User Manual
Remote Control
with Batteries
(AAAx2)
User Manual Quick Start Guide
Registration Card RCA Video
Cable
FM Wire
Antenna
1 Center, 2 Front, 2 Rear
Speakers and Subwoofer
Docking Station
5
PRECAUTIONS
EN
Manufactured under license
from Dolby Laboratories.
“Dolby” and the double-D
symbol are trademarks of
Dolby Laboratories.
Manufactured under license
from Dolby Laboratories.
“Dolby”, “Pro Logic” and the
double-D symbol are
trademarks of Dolby
Laboratories.
Manufactured under license
under U.S. Patent #’s:
5,451,942; 5,956,674;
5,974,380; 5,978,762;
6,226,616; 6,487,535;
7,212,872; 7,333,929;
7,392,195; 7,272,567 & other
U.S. and worldwide patents
issued & pending.
DTS is a registered
trademark and the DTS
logos, Symbol, DTS-HD and
DTS-HD Master Audio are
trademarks of DTS, Inc.
©1996-2008 DTS, Inc. All
Rights Reserved.
HDMI, the HDMI Logo, and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI
Licensing LLC in the United
States and other countries.
Java and all other Java
trademarks and logos are
trademarks or registered
trademarks of Sun
Microsystems, Inc. in the
United States and/or other
countries.
Windows Media and the
Windows logo are
trademarks or registered
trademarks of Microsoft
Corporation in the United
States and/or other
countries.
DivX, DivX Certified, and
associated logos are
trademarks of DivX, Inc. and
are used under license.
“BONUSVIEW” is trademark
of Blu-ray Disc Association.
“BD-LIVE” logo is trademark
of Blu-ray Disc Association.
iPod is a trademark of Apple
Computer, Inc., registered in
the U.S. and other countries.
“Blu-ray Disc” and are trademarks.
is a trademark of DVD Format/Logo Licensing
Corporation.
Trademark Information
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
EN6
CONTENTS
Introduction
Precautions ...................................................................2
Safety Instructions ....................................................................2
Contents ........................................................................6
Features ........................................................................7
Features ........................................................................................7
Symbols Used in this User Manual ......................................7
Functional Overview ....................................................8
Front Panel ...................................................................................8
Rear Panel .....................................................................................8
Remote Control ..........................................................................9
Front Panel Display ................................................................ 11
Guide to On-Screen Display ............................................... 12
Connections
Connections ................................................................13
Placing the Speakers .............................................................13
Connection to the TV ............................................................13
Connecting Speakers and Subwoofer ............................ 16
Connecting Audio from Cable Box/Recorder/Game
Console or TV ........................................................................ 16
Network Connection with LAN .........................................17
Basic Setup
Before You Start .........................................................18
Finding the Viewing Channel on Your TV ..................... 18
Playback
Information on Playback ...........................................19
Information on Playback ...................................................... 19
Guide to File List .....................................................................21
How to Insert a Disc ............................................................... 21
Basic Playback ............................................................22
Playing Back a BD or a DVD ................................................ 22
Playing Back an Audio CD or a Disc with DivX®/MP3/
Windows Media™ Audio/JPEG Files .............................. 23
Reading the SD Memory Card ...........................................24
About DivX® and DivX® VOD .............................................. 24
Playing Back a DivX® with DivX® External Subtitle ..... 25
Using the Title / Disc Menu .................................................25
Special Playback .........................................................26
Fast Forward / Fast Reverse ................................................ 26
Slow Forward Playback ........................................................ 26
Step by Step Playback .......................................................... 26
Repeat Playback ......................................................................26
A-B Repeat ................................................................................26
Program Playback .................................................................. 27
Random Playback ................................................................... 27
Slide Show ................................................................................. 28
PiP (BONUSVIEW) Setting .................................................... 28
Enjoying BD-Live Discs with Internet .............................. 28
Search ......................................................................................... 29
Switching Subtitles ................................................................29
Switching Audio Soundtrack .............................................30
Switching Camera Angles ................................................... 30
Playback-iPod .............................................................31
Playing Music from Compatible iPod Device ............... 31
Radio Tuning
Radio Operations ....................................................... 32
Tuning to Radio Stations ......................................................32
Presetting Radio Stations .....................................................32
Selecting a Preset Radio Station ........................................32
Deleting a Preset Radio Station .........................................32
Function Setup
List of settings ............................................................ 33
Setups ......................................................................... 41
Video Resolution .....................................................................41
EasyLink (CEC) ..........................................................................41
HDMI Audio ...............................................................................42
TV Shape .....................................................................................43
Parental .......................................................................................43
Network Connection .............................................................44
Software Upgrade ...................................................................47
Reset to Factory Default .......................................................48
Others
Troubleshooting ........................................................ 49
Glossary ......................................................................51
Specifications ............................................................. 53
ONE (1) YEAR LIMITED WARRANTY .......................... 54
7EN
FEATURES
Watch movies in the highest picture quality available for your HDTV. The HTS5100B Blu-ray Disc Home Theater offers full high-
definition video playback up to 1080p resolution for an amazing viewing experience. A highly detailed picture and increased
sharpness delivers a more true-to-life picture.
Blu-ray Disc
You can enjoy Blu-ray Disc which is capable of storing five
times more data than a conventional DVD.
BD Java
With some BDs which support Java applications, you can
enjoy the interactive functions such as games or interactive
menus.
Upscale DVD for enhanced picture quality
Your current DVD will look even better than before thanks to
video upscaling. Upscaling will increase the resolution of
standard definition DVD to high definition up to 1080p over
an HDMI connection. The picture will be less jagged and more
realistic for a near high definition experience.
Enjoy your content on different kinds of media
Full backwards compatibility with DVD, CD and SD Card
ensures that you can continue to enjoy your current audio-
video collection. Additionally, you can view JPEG digital
pictures or listen to MP3 or Windows Media™ Audio music
files.
Listen to the rich multi-channel surround sound
Multi-channel surround sound, which realizes real-to-life
sound and makes you feel that you are really there.
Intuitive user interface and remote control
The Philips logical user interface allows you to easily navigate
through your content and settings, so you can quickly find
what you are looking for.
Easy and simple connection to your HDTV via HDMI
Connect your HTS5100B to your HDTV with one single HDMI
(High Definition Multimedia Interface) cable. Philips
recommends HDMI1.3 (category 2) cable (also known as High
Speed HDMI cable) for better compatibility. The high definition
video output signal will be transferred to your HDTV without
conversion to analog signals, so you will get an excellent
picture and sound quality, completely free from noise.
About EasyLink (CEC) (Consumer Electronics Control)
EasyLink (CEC) allows you to operate the linked functions of
this player with Philips brand TV with EasyLink feature.
Philips does not guarantee 100 % interoperability with other
brands of HDMI CEC compliant devices.
PiP (BONUSVIEW)
Some BD-videos have the PiP function which enables you to
display the secondary video in the primary video. You can call
up the secondary video by pressing [MODE] whenever the
scene contains the secondary video.
BD-Live
BD-Live (BD-ROM version 2 Profile 2.0) that allows interactive
functions to be used when this unit is connected to the
Internet in addition to the BONUSVIEW function. The various
functions differ depending on the disc.
Pop-up menu
Some BD-videos have a pop-up menu which is a navigation
menu that can be called up and be operated on the screen
without interrupting the playback. You can call up the pop-up
menu by pressing [DISC MENU / POP-UP MENU]. Contents in
the pop-up menu vary depending on the disc.
HDMI Deep Color
Deep Color reduces the posterization effect of the playback
image. Refer to “Deep Color” in the “LIST OF SETTINGS” on
page 34.
HDMI 1080p/24 output (BD only)
This unit is equipped with the feature which can provide the
smooth movement in the playback of film originated material
with the frame rate of 24 frames per second with progressive.
(Available only when the display device is connected by an
HDMI cable.)
Refer to “BD-Video 24p Output” in the “LIST OF SETTINGS” on
page 38.
Playing back the contents in SD Memory Card
You can play back MP3/WMA/JPEGs stored in an SD Memory
Card. You can store picture-in-picture commentary, subtitles
or other extras for BD-ROM Ver. 2 (Profile 2.0/ Profile 1.1) files
in an SD Memory Card and play back with the BD-video.
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
If you do not find any of the symbols listed above under the
function heading, the operation is applicable to all media.
Features
Symbols Used in this User Manual
Symbol Description
Description refers to BD-video
Description refers to DVD-video
Description refers to audio CD/DTS-CD
Description refers to BD-RE/-R, DVD-RW/-R
and CD-RW/-R with DivX® files
Description refers to DVD-RW/-R, CD-RW/-R
and SD Card with MP3 files
Description refers to DVD-RW/-R, CD-RW/-R
and SD Card with Windows Media™ Audio files
Description refers to DVD-RW/-R, CD-RW/-R
and SD Card with JPEG files
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
EN8
FUNCTIONAL OVERVIEW
* The unit can also be turned on by pressing these buttons.
1. Q(STANDBY-ON) button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
2. Disc tray
• Place a disc when opening the disc tray.
3. A(OPEN/CLOSE) button*
• Press to open or close the disc tray.
4. Infrared sensor window
• Receive signals from your remote control so that you
can control the unit from a distance.
5. Display
• Refer to “Front Panel Display” on page 11.
6. VOLUME jog
• Rotate to adjust the volume.
7. C(STOP) button
• Press to stop playback.
8. B(PLAY) button*
• Press to start or resume playback.
9. H/G(PREV/NEXT) button
• Press to skip to the previous or next title/chapter/
track.
10. SOURCE button
• Press to select the relevant active source mode;
“DISC”, “AUX”, “FM”, “iPod” or “D-IN”.
The following jacks are under the flap at the right corner of
the front panel.
11. SD CARD slot
• Insert an SD Memory Card and play back the
contents in it.
12. iPod DOCK jack
• Use to connect to the iPod docking station.
1. AC Power Cord
• Connect to a standard AC outlet to supply power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
2. AUDIO IN (AUX) jacks
• Use to connect to other device with audio out jacks
with an RCA audio cable.
3. COMPONENT VIDEO OUT jacks
• Use to connect a TV monitor with component video
inputs with a component video cable.
4. FM ANT 75Ω jack
• Use to connect to an external FM wire antenna.
5. HDMI OUT jack
• Use to connect to a display with an HDMI compatible
port with an HDMI cable.
6. LAN Terminal
• Use to connect a telecommunications equipment
with LAN cable.
7. VIDEO OUT jack
• Use to connect a TV monitor, an AV receiver /
amplifier or other device with an RCA video cable.
8. DIGITAL IN (OPTICAL) jack
• Use to connect to other device with digital audio
optical output jacks with a digital audio optical cable.
9. 5.1ch Audio Out jacks (SPEAKERS (6Ω))
• Use to connect to 5.1ch speakers.
Front Panel
VOLUME
PUSH
1 2 3* 5 6 7 8* 11 12
9
410
Rear Panel
6543
7
2
9 8
1
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
9
FUNCTIONAL OVERVIEW
EN
* The unit can also be turned on by pressing these buttons.
1. STANDBY-ON Q button
• Press to turn on the unit, or to turn the unit into the
standby mode. (To completely shut down the unit,
you must unplug the AC power cord.)
2. SLEEP button
• Press to set the sleep timer.
3. SOURCE button
• Press to select the relevant active source mode;
“DISC”, “AUX”, “FM”, “iPod” or “D-IN”.
4. RED/GREEN/BLUE/YELLOW button
• Press to activate short cut keys on some BD-video
function.
• When file list / setup list is shown, press to switch
between pages.
5. HOME button
• Press to display the home menu.
6. DISC MENU / POP-UP MENU button
• Press to display the disc menu / pop-up menu.
7. Cursor K/L/s/B buttons
DISC:
• Press to select items or settings.
RADIO:
• Press up or down to tune the radio frequency.
• Press left or right to start auto search.
8. OK button
• Press to confirm or select menu items.
9. BACK U button
• Press to return to the previously displayed menu or
screen function.
10. PLAY B button*
• Press to start playback or resume playback.
11. PREV S button
DISC:
• During playback, press once to return to the
beginning of the current title, chapter, track or file.
• During the JPEG playback, press to return to the
previous file.
• During playback, press twice to return to the
previous title, chapter, track or file.
RADIO:
• Press to select a preset radio station.
12. REW E button
• During playback, press to fast reverse the playback.
13. STOP C button
DISC:
• Press to stop playback.
RADIO:
• Press and hold this button to erase the current
preset radio station.
14. VOL ⴐ / ⴑ button
• Press to adjust the volume.
15. AUDIO button
• Press to select the audio channel (such as audio
languages).
16. Number buttons
• Press to select a chapter during playback.
• Press to enter values in the input field.
17. SUBTITLE button
• Press to select subtitles on a disc.
18. ANGLE button
• Press to select camera angles on a disc.
• Press to rotate a picture (JPEG).
19. SEARCH button
• Press to display the search menu.
20. REPEAT button
• Press to toggle between various repeat modes.
21. REPEAT A-B button
• Press to play back a defined section between point
A and B repeatedly.
22. CLEAR button
• Press to clear the information once entered, to clear
the marker settings, or to cancel the programming
for audio CD, etc.
23. SOUND MODE button
• Press to select a sound mode.
24. SURROUND button
• Press to select surround listening mode.
25. MUTE d button
• Press to mute the volume.
26. FFW D button
• During playback, press to fast forward the playback.
• When playback is in pause, press to slow forward
the playback.
27. NEXT T button
DISC:
• During playback, press to skip to the next chapter,
track or file.
RADIO:
• Press to select a preset radio station.
Remote Control
1
2
5
6
7
9
11
10*
12
13
14
15
16
17
18
4
3
8
19
32
31*
30
29
27
23
24
22
21
26
25
28
20
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
10
FUNCTIONAL OVERVIEW
EN
28. PAUSE F button
• Press to pause playback.
• When playback is in pause mode, press repeatedly
to forward the playback step by step.
29. INFO button
• Press to display the information display.
30. TOP MENU button
BD:
• Press to display the top menu.
DVD:
• Press to display the title menu.
31. OPEN/CLOSE A button*
• Press to open or close the disc tray.
32. MODE button
DISC:
• During BD playback, press to switch the picture-in-
picture feature on or off (only applicable to BD-
video which supports the PiP function).
• In stop mode with BD inserted, press to display a
menu for setting the BD audio mode.
• In stop mode with audio CD, MP3, WMA or JPEG
files inserted, press to display menus for program
and random playback.
• During the JPEG playback, press to display menus
for changing the visual effect for switching the
image or changing the size of the image.
RADIO:
• Switch between stereo and mono mode.
(Only available during playback of stereo
broadcasting.)
Install the batteries (AAAx2) matching the polarity
indicated inside battery compartment of the remote
control.
Keep in mind the following when using the remote
control:
• Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.
• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.
• Replace the batteries when you notice a fall off in the
operating range of the remote control.
• The maximum operable ranges from the unit are as
follows.
- Line of sight:
approx. 23 feet (7 m)
- Either side of the center:
approx. 16 feet (5 m) within 30°
-Above:
approx. 16 feet (5 m) within 15°
-Below:
approx. 10 feet (3 m) within 30°
Installing the Batteries in the Remote Control
1) Open the cover.
2) Insert batteries.
Make sure to match + and - on the batteries to the
marks indicated in the battery compartment.
3) Close the cover.
Note
Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.
• Make sure that the + and - ends of each battery
match the indications in the battery compartment.
• Remove batteries from battery compartment that is
not going to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction’s rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or
disassemble batteries.
Using a Remote Control
VOLUME
PUSH
30˚ 30˚
16 feet (5 m) 23 feet (7 m) 16 feet (5 m)
11
FUNCTIONAL OVERVIEW
EN
1. Displays source mode status icon and playback status icon. Refer to the table below.
2. Displays various kinds of information such as title number, elapsed playing time, repeat type, menu type, etc.
e.g.;
Front Panel Display
1 2
* Brightness of the display can be adjusted. Refer to “Display Dim” in “LIST OF SETTINGS” on page 33.
Source mode
status icon Mode Playback status icon
Mode
Playback status
icon will be
displayed
DISC mode Disc SD Memory
Card
AUX mode Playback is in progress
FM mode Stop mode
iPod mode Pause mode
D-IN mode Fast forward mode
Fast reverse mode
Slow forward mode
Loading a media
Appears while repeat function is set
Appears while displaying the home
menu
Title is being played back.
Indicating the current title number and the elapsed time.
Current chapter is in chapter repeat mode.
Loading a disc.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
12
FUNCTIONAL OVERVIEW
EN
To call up the home menu, press [HOME ] in stop mode.
1. Directory
Displays the current hierarchy.
2. Menus
3. Options
Displays options for the high-lighted item on the left
whenever available.
Guide to On-Screen Display
Home Menu
“General Setup” : To access the general setup menus.
“Video Setup” : To access the video setup menus.
“Audio Setup” : To access the audio setup menus.
“Listening
Viewer”
: To access the setting status screen
of listening mode setup.
“Play Disc
Setup”
: To access the play disc setup menus.
“Factory
Default”
: To access the factory default setup
menu.
Menu Screen
"LURAY$ISC(OME4HEATER3YSTEM
General Setup
Video Setup
Audio Setup
Listening Viewer
Play Disc Setup
Factory Default
BD Home Theater System
Audio Setup
Speaker Setup Speaker Configuration
Test Tone & Level
Speaker Distance
Sound Mode
HDMI Audio
Audio Sync
Listening Mode Setup
23
1
13EN
CONNECTIONS
The Philips Blu-ray Disc Home Theater is simple to install. However, proper system placement is critical to ensure an
optimum sound experience.
1) Place the front left and right speakers at equal distances from the TV and at an angle of approximately 45
degrees from the listening position.
2) Place the center speaker above the TV or the main unit so that the center channel’s sound is localized.
3) Place the rear speakers at normal listening ear level facing each other or hang on the wall.
4) Place the subwoofer at the corner of the room. Otherwise, keep it at least one meter away from the TV.
(Supports up to 1080i(*1), 1080p(*2), 1080p/24 resolution.)
(*1) 1080i : Outputs the video data with frame rate of 30 frames per second.
(*2) 1080p : Outputs the video data with frame rate of 60 frames per second.
Placing the Speakers
Note
• The placement diagram shown here is only a guideline that provides great system performance. You may find other
placement choices that are more suitable for your room layout that provide the sound experience you enjoy.
• To avoid magnetic interference, never position the front speakers too close to your TV.
• The rear speakers are labeled as REAR LEFT or REAR RIGHT.
• The front speakers are labeled as FRONT LEFT or FRONT RIGHT.
• For speaker setup, refer to “Speaker Setup” on page 35.
Connection to the TV
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
SUBWOOFER
1Choose the appropriate connection, then proceed to the corresponding
instruction (A, B or C) on the next page.
Best
HDMI IN
A
Video
Audio
HDMI cable
Your TV
No analog audio connection required.
Go To
High
Definition
TV
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
High Speed HDMI Cable (also known as HDMI category 2 cable) is recommended for the better compatibility.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
14
CONNECTIONS
EN
(Supports up to 1080i resolution.)
(Supports only 480i resolution.)
• Connect this unit directly to the TV. If the RCA audio / video cables are connected to a VCR, pictures may be distorted
due to the copy right protection system.
HDMI Connection
Better
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
B
Video RCA component video cable
Your TV
Go To
High
Definition
TV
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Basic
VIDEO IN C
Video RCA video cable
Your TV
Go To
Standard
Definition
TV
Supplied cables used in this connection are as follows:
• RCA video cable x 1
2Connect the cables by following the descriptions below.
A
HDMI IN
($-)/54
HDMI cable
Your TV
15
CONNECTIONS
EN
Component Video Connection
Standard Video Connection
B
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
RCA component video cable
Your TV
C
VIDEO IN
Your TV
RCA video cable
Copyright protection system
To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that both the
player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high-
bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption
and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of
your display device (or AV receiver / amplifier) for more information.
Note
• When using HDCP-incompatible display device, the picture will not be viewed properly.
• The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length)
may be limited by the device that is connected.
• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output jack.
• When this unit’s HDMI jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an HDMI-
DVI converter cable, the signals are output in digital RGB.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
16
CONNECTIONS
EN
1) Connect the speaker cables to the matching color sockets on the speakers or speaker stands.
2) Connect all the speakers and subwoofer to the matching sockets at the rear of the main unit. Make sure that
the colors of the cables and sockets are matched.
This unit provides analog and digital audio connection. You can connect the audio output from an audio/video device
(e.g. DVD Recorder, VCR, Cable/Satellite Box, game console or TV) to this Blu-ray Disc Home Theater in order to enjoy the
multi-channel surround sound capabilities.
• Use a RCA audio cable (not supplied) to connect the AUDIO IN (AUX) jacks on the main unit to the AUDIO OUT jacks on
the connected device.
To listen to the audio output from this connection, press [SOURCE] repeatedly until “AUX” appears on the front panel
display.
Connecting Speakers and Subwoofer
Note
• To prevent unwanted noise, never place the speakers too close to the main unit, subwoofer, AC power adapter, TV
or any other radiation sources.
FRONT
LEFT
FRONT
RIGHT
FRONT CENTER REAR LEFTREAR RIGHTSUBWOOFER
Connecting Audio from Cable Box/Recorder/Game Console or TV
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
AUDIO OUT
R
L
OPTICAL
DIGITAL OUT DVD Recorder
Cable/Satellite Box
VCR
Your TV
RCA audio cable
Digital audio optical cable
or
or
17
CONNECTIONS
EN
• You can use a disc which offers BD-Live function by connecting the unit to the Internet.
(For BD-Live information, please refer to page 28)
Network Connection with LAN
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
LAN
LAN WAN LAN
12345
this unit
Internet
LAN cable
LAN cable
Hub or broadband router
Telecommunications
equipment (modem, etc.)
Note
• After connecting to the Internet, set up necessary network settings.
• Do not insert any cable other than a LAN cable to the LAN terminal to avoid damaging the unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a
broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port,
use a hub.
• For a broadband router, use a router which supports 10BASE-T/100BASE-TX.
• Do not connect your PC directly to the LAN terminal of this unit.
• For the network setup, refer to “Network Connection” on page 44.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
EN18
BEFORE YOU START
After you have completed all the connections, you must find the viewing channel (external input channel) on your TV.
Finding the Viewing Channel on Your TV
1After you have made all the necessary
connections, press [STANDBY-ONQ] to
turn on the unit.
2Turn on your TV.
3Press the button on the TV’s remote
control that accesses the external input
channel. It may be labeled “SOURCE”,
“AV” or “SELECT” (refer to your TV’s
user manual). Or press “2” on the TV’s
remote control, then press channel
down button repeatedly until you see
the PHILIPS splash screen.
This is the correct viewing channel (external
input channel).
To call up the home menu, press [HOME ].
Home menu:
"LURAY$ISC(OME4HEATER3YSTEM
General Setup
Video Setup
Audio Setup
Listening Viewer
Play Disc Setup
Factory Default
19EN
INFORMATION ON PLAYBACK
Before you start playing back a disc, read the following information.
This unit is compatible to play back the following discs / files.
To play back a disc / file, make sure that it meets the
requirements for region codes and color systems as
described below. You can play back discs that have the
following logos. Other disc types are not guaranteed to
play back.
(*) Due to the intentional progression of the Blu-ray Disc
format by its standard setting authority, the company
cannot guarantee or warrant the playability of future
extensions of the Blu-ray Disc format with this product.
• ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, Inc. This is an official DivX Certified
device that plays DivX video. Visit www.divx.com for
more information and software tools to convert your files
into DivX video.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play DivX Video-on-
Demand (VOD) content. To generate the registration
code, locate the DivX VOD section in the device setup
menu. Go to vod.divx.com with this code to complete
the registration process and learn more about DivX VOD.
• Official DivX® Certified product; Plays all versions of DivX®
video (including DivX® 6) with standard playback of
DivX® media files.
• Discs containing the DivX® files with the DivX® GMC
(Global Motion Compensation) playback feature, which
is DivX® supplemental function, cannot be played back
on this unit.
• This unit cannot play back the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
Information on Playback
Playable Discs and Files
Playable discs Logos
Blu-ray Disc
-BD-video
-BD-RE* ver.2.1
(Recorded in BDMV format)
- BD-R* (ver. 1.1/1.2/1.3)
(Recorded in BDMV format)
(Unclosed discs may not be played
back.)
DVD-video
DVD-RW
(finalized video mode discs only)
DVD-R
(finalized video mode discs only)
CD-DA (audio CD)
CD-RW
CD-R
DTS-CD -
Playable files Media
DivX®
BD-RE/-R
DVD-RW/-R
CD-RW/-R
MP3 DVD-RW/-R
CD-RW/-R
SD Memory Card (including SDHC)
miniSD Card
microSD Card
Windows Media™ Audio
JPEG
Readable cards Playable files / data
SD Memory Card (8 MB - 2 GB) MP3, WMA, JPEG, picture-
in-picture commentary,
subtitles or other extras for
BD-ROM Ver. 2 (Profile 2.0/
Profile 1.1)
SDHC Memory Card (4 GB - 8 GB)
miniSD Card (8 MB - 2 GB)
microSD Card (8 MB - 2 GB)
Note for SD Memory Cards
• This unit supports SD Memory Card with FAT12/
FAT16 file system, and SDHC Memory Card with
FAT32 file system.
• This unit does not support NTFS file system.
• This unit may not read the SD Memory Cards
formatted on a computer. If that is the case, please
reformat the SD Memory Cards in this unit and try
again.
• This unit does not support miniSDHC and microSDHC
Memory Card.
• For miniSD Card and microSD Card, the adapter is
necessary.
• Portions of this product are protected under
copyright law and are provided under license by
ARIS / SOLANA / 4C.
• Please keep the SD Memory Cards in their cases when
you are not using them.
• Do not try to open or modify the card.
• Do not touch the terminal surface with your fingers or
any metals.
• Do not attach additional labels or stickers to cards.
• Do not remove the label of the SD Memory Cards.
• This unit recognizes up to 8 characters of file name in
the SD Memory Card. Characters after 8th will not be
displayed.
miniSD Card
adapter
miniSD Card microSD
Card
microSD Card
adapter
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
20
INFORMATION ON PLAYBACK
EN
The following discs will not be played back in this unit.
• BD-RE (ver.1.0)
• BD-RE (ver.2.1) (Recorded in BDAV format)
• BD-R (ver.1.1/1.2/1.3) (Recorded in BDAV format)
• Super Audio CD - Only the sound on the CD layer can be
heard. The sound on the high-density Super Audio CD
layer cannot be heard.
• Playability of dual discs are not guaranteed.
BD-video and DVD-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily in the United
States and Canada).
This unit employs NTSC color system, so the disc you play
back must be recorded in the NTSC system. You cannot
play back the disc recorded in other color systems.
The contents of disc are generally divided into sections or
folders (groups of titles/files) as shown below.
[ ] : group (folder) icon
[ ] : video file icon
[ ] : music file icon
[ ] : picture file icon
- “Folders” refers to the groups of files.
- “Tracks” refers to the contents recorded on the audio
CD.
- “Files” refers to the contents on a disc which are
recorded in DivX®, MP3, Windows Media™ Audio or JPEG
file format.
Unplayable Discs and Files
• CD-ROM • CD-I (compact disc-interactive)
•DVD-RAM •VSD (video single disc)
•DVD-audio •video CD
• HD DVD • SVCD
• unfinalized disc
Color Systems
Region Codes
This unit has been designed to play back
BD-video with region “A” and DVD-video
with region “1” or “ALL”. You cannot play
back BD-video or DVD-video that are
labeled for other regions. Look for the
symbols on the right on your BD-video or
DVD-video.
If these region symbols do not appear on
your BD-video or DVD-video, you cannot
play back the disc in this unit. The letter or
number inside the globe refers to region
of the world. A BD-video or DVD-video
labeled for a specific region can only be
played back in the unit with the same
region code.
BD-video
DVD-video
Hint for Disc Playback
Description for Icons
Note
• Unrecognizable characters will be replaced by “”.
• For DVD and SD Card, this unit can recognize up to
999 groups (folders), and 9999 tracks / files.
• For CD, this unit can recognize up to 255 groups
(folders), and 999 tracks / files.
BD-video, DVD-video
title 1 title 2
chapter 1 chapter 2 chapter 2chapter 1 chapter 3
Audio CD
track 1 track 2 track 3 track 4 track 5
DivX®, MP3, Windows Media™ Audio, JPEG
folder (group) 1 folder (group) 2
file 1 file 2 file 1 file 2 file 3
21
INFORMATION ON PLAYBACK
EN
1) Playing track number
2) Total track number
3) Elapsed playing time of the current track
4) Track list
5) Media icon
6) Playing media
e.g., MP3 mode
1) Playing track number
2) Total track number in the current hierarchy
3) Elapsed playing time of the current track
4) Current file name
5) Group (folder) / File list
6) Media icon
7) Current Disc, SD Memory Card, or folder name will
be displayed.
e.g., JPEG mode
1) Current file number
2) Total file number in the current hierarchy
3) Current file name
4) Group (folder) / File list
5) Media icon
6) Current Disc, SD Memory Card, or folder name will
be displayed.
1) Press [OPEN/CLOSE A] to open the disc tray.
2) Place the disc on the disc tray with its label side
facing up.
* Make sure the disc is compatible with this unit. (Refer to page 19 for the
list of compatible discs.)
3) Press [OPEN/CLOSE A] to close the disc tray.
To eject the disc:
Press [OPEN/CLOSE A] to open the disc tray.
Remove the disc.
Press [OPEN/CLOSE A] to close the disc tray.
Guide to File List
Audio CD Track List
Video/Audio Mode File List
Track001
Track002
Track003
Track004
Track005
Track006
Track007
File List
CD-DA
Page Down
1 / 19 0:00:01
42
4
1
5
6
23
Folder1
Folder2
Track1.mp3
Track2.mp3
Track3.mp3
Track4.mp3
Track5.mp3
File List
MP3_CD
Page Down
1 / 43 0:00:01
42
5
1
6
7
23
4
Picture Mode File List
How to Insert a Disc
It may take a while to load the disc.
Folder1
Folder2
Track1.jpg
Track2.jpg
Track3.jpg
Track4.jpg
Track5.jpg
File List
JPEG_CD
Page Down
1 / 43
42
4
1
5
6
2
3
Align the disc to the
disc tray guide.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
EN22
BASIC PLAYBACK
Playing Back a BD or a DVD
1Insert a disc (refer to page 21 on
how to insert a disc).
2Playback may start automatically.
If not, press [PLAY B].
Some discs may show a title or a disc menu. In
this case, refer to “Using the Title / Disc Menu”
on page 25.
To pause playback:
Press [PAUSE F].
To return to the normal playback:
Press [PLAY B].
To stop playback:
Press [STOP C].
Playback will be in Resume-On-Stop mode.
<Resume-On-Stop mode>
When you press [PLAY B] next time, the
playback will start from the point where it has
been stopped.
Note
• For BD Java application, the Resume-On-Stop is not
available.
• The resume message can be removed by pressing
[BACK U].
• Resume-On-Stop mode remains in effect even after
power is turned off, but will be cancelled once the
disc is ejected.
23
BASIC PLAYBACK
EN
•Use [K/L] to move the highlight up and down in the
list.
• To access the files in a group (folder), highlight the
desired group (folder), then press [OK].
•Press [s] to go back to the previous hierarchy.
•Press [s] to go back to the previous screen.
•Press [RED] or [GREEN] to change the page of the list.
Recommended specifications:
<DivX®>
Official DivX® Certified product
<MP3/Windows Media™ Audio >
<JPEG>
Resolution
Folder / File number limitations:
<BD, DVD and SD Card>
• 999 folders (groups) and 9,999 files.
<CD>
• 255 folders (groups) and 999 tracks / files.
Playing Back an Audio CD or a Disc with DivX®/MP3/Windows Media™ Audio/JPEG Files
How to Navigate through the Track/File List
• Playable codec of AVI files : DivX® 3.x, DivX® 4.x, DivX®
5.x, DivX® 6.x
• Maximum size of a video : 1920 x 1080 @30 fps
1280 x 720 @60 fps
• Sampling frequency of
audio : 16 kHz - 48 kHz
• Audio type : MPEG1 audio layer 3(MP3),
MPEG1 audio layer 2, AC3
• Sampling frequency : 32 kHz, 44.1 kHz or 48 kHz
• Constant bit rate : 112 kbps - 320 kbps(MP3),
48 kbps - 192 kbps
(Windows Media™ Audio)
• Upper limit :
:
2,560 x 1,900 dots
(sub sampling is 4:4:4)
5,120 x 3,840 dots
(sub sampling is up to
4:2:2)
• Lower limit : 32 x 32 dots
• Maximum file size of a
picture
:5 MB
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
24
BASIC PLAYBACK
EN
You can play back the MP3/WMA/JPEG files in an SD
Memory Card.
With the SD Memory Card, you can also enjoy the
following functions.
- Special additional contents for BD-ROM Profile 1 ver.1.1.
(For more information about the special additional
contents, refer to the instruction book that came with
the disc.)
- BD-Live function (BD-ROM ver. 2 Profile 2.0). (For more
information about BD-Live, refer to page 28.)
Hint for the purchased or rented official DivX®
Certified product
• When you purchase or rent a DivX® file through the official
site of DivX® video which is called DivX® Video On-Demand
(VOD) services, a registration code is required every time
you get the new file from the DivX® VOD services. Refer to
“DivX(R) VOD” in “LIST OF SETTINGS” on page 39.
1Insert a disc (refer to page 21 on
how to insert a disc).
• Media Filter screen appears automatically.
2
Select the type of the file you want to
play back in the media filter screen.
Then press [OK] to display the file list.
3Select a group (folder) or track/file
you want to play back. Then press
[PLAY B] or [OK] to start playback.
Refer to “How to Navigate through the Track/
File List” on page 23.
To skip to the next track/file:
Press [NEXT T].
To skip to the previous track/file:
Press [PREV S].
To pause playback:
Press [PAUSE F].
To return to the normal playback:
Press [PLAY B].
To stop playback:
Press [STOP C].
Playback will be in Resume-On-Stop mode.
<Resume-On-Stop mode for
audio CD/DivX®
>
Playback will start from the point where it is
stopped next time you press [PLAY B].
If you press [OK] instead of [PLAY B],
playback will start from the beginning of the
track instead of resuming from the stop point.
<Resume-On-Stop mode for MP3/Windows
Media™ Audio/JPEG>
Playback will start from the beginning of the
current file next time you press [PLAY B] or
[OK].
To go back to the media filter screen :
Press [YELLOW] in Resume-On-Stop mode.
“Video” : If you want to play back video
files such as DivX® video files,
select “Video”.
“Audio” : If you want to play back music
files such as Windows Media™
Audio, select “Audio”.
“Picture” : If you want to play back the still
images such as JPEG pictures,
select “Picture”.
Reading the SD Memory Card
1Insert an SD Card.
“Media Select” screen appears automatically.
2With “SD Card” selected, press [OK]
to display the file list.
3Follow step 2 in “Playing Back an
Audio CD or a Disc with DivX®/MP3/
Windows Media™ Audio/JPEG
Files” on page 23.
To remove the SD Memory Card:
In stop mode, gently push in the SD Memory
Card, then pull it out slowly.
Note
• In the “SD Card” mode, the resume information will
be cleared when;
-[STOP C] is pressed while in the Resume-On-Stop
mode.
-the SD Memory Card is removed.
-the unit is turned into the standby mode.
• Do not remove the SD Memory Card or turn the unit
to the standby mode while the contents of the card
are in playback. It may result in malfunction or loss of
the card’s data.
• Do not delete the folders or files in the SD Memory
Card with your computer. This unit may not read the
SD Memory Cards formatted on a computer.
About DivX® and DivX® VOD
VOLUME
PUSH
SD Memory Card
25
BASIC PLAYBACK
EN
“This rental has c views left. Do you want to use one of
your c views now?”
Some DivX® VOD files are restricted with the limited
playable times. You cannot play them back beyond the
limit.
“This player is not authorized to play this video.”
You cannot play back the DivX® VOD files obtained with
different registration codes on this unit.
“This rental is expired.”
You cannot play back the DivX® VOD files with the expired
rental period.
“This player does not support this video format.”
You cannot play back the DivX® files whose image size
exceeds 1920 x 1080 @30 fps or 1280 x 720 @60 fps.
“This player does not support this audio format.”
For DivX® files with audio format other than MPEG1 audio
layer 3 (MP3), MPEG1 audio layer 2 and Dolby Digital,
audio will not be output and only the video will be output.
Subtitles created by the user can be displayed during
DivX® playback.
1) Follow steps 1 to 3 in “Playing Back an Audio CD or a
Disc with DivX®/MP3/Windows Media™ Audio/JPEG
Files” on page 23.
2) Highlight a file you want to play back, then press
[BLUE].
Subtitle list will appear.
• “DivX Subtitle” appears next to “Blue” icon only when
DivX® subtitle is available for the selected file.
•If you press [PLAY B] or [OK] instead of [BLUE],
playback without subtitle will start.
3) Highlight the desired subtitle file, then press
[PLAY B] or [OK].
Playback of the DivX® file with DivX® subtitle will start.
Some BD-video or DVD-video may contain a title menu
which describes the contents of the disc, or a disc menu
which guides you through the available functions in the
disc.
With such discs, a title menu or a disc menu may appear
automatically when you insert the disc. Otherwise, press
[TOP MENU] or [DISC MENU / POP-UP MENU] to call up
the menu. Refer to the disc’s manual on how to navigate
through the menu.
Possible Errors
Note
• A file with an extension of “.avi” and “.DivX” is called
as a DivX® file. All files with the “.avi” extension are
recognized as MPEG4.
• For CD-RW/-R, maximum of 255 group (folder) or 999
files may be recognized.
• For DVD-RW/-R, maximum of 999 group (folder) or
9,999 files may be recognized.
• For BD-RE/-R, maximum of 999 group (folder) or
9,999 files may be recognized.
• The 10th and deeper hierarchies cannot be
displayed.
• Unrecognizable characters will be replaced with “”.
• When playing back the files recorded in high bit
rates, the images can be interrupted in some
occasions.
• Although DivX® logo has been obtained for this unit,
it may not be able to play back some data,
depending on the characteristics, bit rates, or audio
format settings, etc.
• A DivX® file whose file size exceeds 2 GB cannot be
played back.
• If a large-sized DivX® file is selected, it may take a
while to start the playback (over 20 seconds
sometimes).
• If DivX® files written on a CD-RW/-R or DVD-RW/-R
cannot be played back, rewrite them on a BD-RE/-R
and try to play back.
• Multi-session burn DivX® BD and DVD cannot be
played back on this unit.
• For more information for DivX®, please visit
http://www.divx.com.
Playing Back a DivX® with DivX®
External Subtitle
Note
• To utilize this function, the following conditions
must meet.
-Playback file and the subtitle file must have the same
name.
-Playback file and the subtitle file must locate in the
same folder.
-Only the subtitle files with the following extensions
are supported; .smi (.SMI), .srt (.SRT), .sub (.SUB), .ass
(.ASS), .ssa (.SSA), .txt (.TXT). (.sub (.SUB) and .txt
(.TXT) may not be recognized.)
-The subtitles that exceeds the playback time of the
DivX® file will not be displayed.
• If the DivX® subtitle file contains more than one
subtitle language, you can toggle those by pressing
[SUBTITLE] repeatedly.
Using the Title / Disc Menu
Note
• Menus vary among discs. Refer to the information
accompanying the disc for details.
•[TOP MENU] or [DISC MENU / POP-UP MENU] may
not work with some discs.
3dolby.avi
SRT
SUB
SMI
Subtitle List
Off
Cancel
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
EN26
SPECIAL PLAYBACK
1) During playback, press [FFW D] repeatedly for fast
forward.
During playback, press [REW E] repeatedly for
fast reverse.
Every time you press [FFW D] or [REW E], the
playback speed will change.
• For BD and DVD, speed changes in 5 different levels.
• For audio CD, DivX®, MP3 and Windows Media™
Audio, speed changes in 3 different levels.
2) Press [PLAY B] to return to the normal playback.
1) During playback, press [PAUSE F]. Then press
[FFW D].
Every time you press [FFW D], the playback speed
changes in 3 different levels.
2) Press [PLAY B] to return to the normal playback.
1) In pause mode, press [PAUSE F] repeatedly.
Every time you press [PAUSE F], playback will advance
one step at a time.
2) Press [PLAY B] to return to the normal playback.
Available repeat function varies depending on the discs.
1) During playback, press [REPEAT] repeatedly to
select the desired repeat function.
You can play back the specific part (between point A and
point B) repeatedly.
1) During playback, press [REPEAT A-B] once at the
point where you want to set point A.
2) During playback, press [REPEAT A-B] again at the
point where you want to set point B.
As soon as you set point B, the part between point A
and point B will start to play repeatedly.
To cancel A-B repeat:
Press [REPEAT A-B] repeatedly until “Off” appears.
Fast Forward / Fast Reverse
Note
• For some DivX® files, fast forward/fast reverse may
not function.
Slow Forward Playback
Note
• Only slow forward is available.
• For some DivX® files, slow forward may not function.
Step by Step Playback
Note
• Only step by step forward is available.
Repeat Playback
REPEAT MODE AVAILABLE MEDIA
Chapter Repeat
BD-video/DVD-video
The current chapter will be
played back repeatedly.
Title Repeat
BD-video/DVD-video
The current title will be
played back repeatedly.
Track Repeat Audio CD/DTS-CD/DivX®/
MP3/Windows Media™
Audio/JPEG
The current track or file will
be played back repeatedly.
All Repeat Audio CD/DTS-CD/
DivX®/MP3/Windows
Media™ Audio/JPEG
All tracks in the media will be
played back repeatedly.
Group Repeat
DivX®/MP3/Windows
Media™ Audio/JPEG
The current group (folder)
will be played back
repeatedly.
Note
• The repeat setting will be cancelled when you stop
playback.
• If you press [REPEAT A-B] when the repeat setting
for BD, DVD or CD playback is set, the repeat setting
will be cancelled.
• When the repeat setting is set for a MP3 or WMA
folder, the repeat setting will be cancelled if you
select other MP3 or WMA folder to playback.
• Repeat playback does not function during A-B repeat
playback.
A-B Repeat
Note
• Point B should be set within the same title or track as
point A.
• If you press [REPEAT A-B] when the repeat setting
for BD, DVD or CD playback is set, the repeat setting
will be cancelled.
• For some DivX® files, A-B repeat playback may not
function.
• To cancel the A point which was set, press [CLEAR].
• A-B repeat does not function during chapter, title,
track or group repeat playback.
27
SPECIAL PLAYBACK
EN
You can play back the disc/card in your desired order.
1) In stop mode, press [MODE].
• The program screen will appear.
2) Use [K/L] to select a track / file, then press [OK].
• For MP3, WMA and JPEG files, use [K/L] to select a
folder, then press [OK] first, and then use [K/L] to
select a file, then press [OK].
•Press [CLEAR] to erase the last file of the program.
•Use [K/L] to select “All Clear” at the bottom of the
list to erase all the tracks / files in the program.
• The programmed tracks / files is displayed in the right
hand screen.
•Use [s/B] to go back / forward between the
hierarchy of folders.
3) Press [PLAY B] to start program playback.
• Programmed file list will appear and the program
playback will start.
To exit from the program playback mode:
•Press [BACK U] in stop mode.
This function shuffles the playback order of tracks / files.
1) In stop mode, press [MODE] twice.
• The random screen will appear.
2) Press [PLAY B] to start random playback.
To exit from the random playback mode:
•Press [MODE] in stop mode.
Program Playback
1. audio CD
MP3/WMA/JPEG
:
:
Track information
File information
2. Playback Status
3. Cumulative playback time of all tracks / files in the
programmed list.
4. Programmed list : Track / File list in the
programmed order.
5. Track / File list : Track / File list in the original
order.
6. audio CD
MP3/WMA/JPEG
:
:
“CD-DA” will be displayed.
Current Disc, SD Memory Card,
or folder name will be displayed.
Track001 Track 001
Track002 Track 002
Track003
Track004
Track005
Track006
Track007
Program
CD-DA Total 0:05:43
Page Down
- - / 19
42
1
6
5
2
3
4
e.g.) audio CD
Track001
Track002
Track003
Track004
Track005
Track006
Track007
Program
CD-DA Total 1:05:43
Page Down
1 / 16 0:01:05
42
e.g.) audio CD
Note
• During program playback, press [STOP C] once to
set the resume point, and then press [PLAY B] to
resume program playback from where [STOP C] was
pressed (audio CD) or from beginning of the file
where [STOP C] was pressed (MP3/WMA/JPEG).
• During program playback, press [STOP C] twice to
display the program screen. To go back to the
normal program playback, press [BACK U] to exit
from the program screen, then press [PLAY B].
• Up to 99 tracks / files can be entered.
• To repeat the current track / file in the program,
press [REPEAT] repeatedly until “ Track”
appears during playback. To repeat the entire
program, press [REPEAT] repeatedly until “ All”
appears during playback.
• Playback from a desired track / file and random
playback are not available during program playback.
•Press [MODE] to switch to the random playback
mode.
• The program will be cleared when;
- the unit is turned into the standby mode.
- the media mode is switched to the other mode.
- the disc / card is removed. (as for “Disc” mode, just
opening the disc tray will clear the program info.)
Random Playback
1. audio CD
MP3/WMA/JPEG
:
:
Track information
File information
2. Playback status
3. Total playback time of all tracks / files.
4. Track / File list : Track / File list in the original
order will be displayed.
5. audio CD
MP3/WMA/JPEG
:
:
“CD-DA” will be displayed.
Current Disc, SD Memory Card,
or folder name will be displayed.
Track1.mp3
Track2.mp3
Track3.mp3
Track4.mp3
Track5.mp3
Track6.mp3
Track7.mp3
Random
CD-DA Total 1:01:23
Page Down
- - / 16
42
1 2
3
5
4
e.g.) audio CD
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
28
SPECIAL PLAYBACK
EN
1) Follow steps 1 to 2 in “Playing Back an Audio CD or a
Disc with DivX®/MP3/Windows Media™ Audio/JPEG
Files” on page 23.
2) Open the folder which contains the desired JPEG
files.
3) Use [K/L/s/B] to select a desired track to be
played back, then press [PLAY B] or [OK].
• An image will be played back from the selected track and
go to the next one in turn.
4) Press [STOP C] to stop playback.
To return to the first item:
Press [TOP MENU].
To return to the track/file played last:
Press [DISC MENU / POP-UP MENU].
Some BD-videos have the PiP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressing [MODE]
whenever the scene contains the secondary video.
1) During playback, press [MODE].
PiP information will appear.
2) Use [K/L] to select the secondary video you want
to show.
• The secondary video will be displayed with the
secondary audio.
•You can use [K/L] to switch between “On” or “Off”.
3) Press [BACK U] to remove the PiP information.
• On how to output the secondary audio, refer to
“Switching Audio Soundtrack” on page 30 and
“Blu-ray Disc Audio” on page 37.
You can enjoy the BD-Live functions which enable you to
use the interactive functions when the unit is connected to
the Internet. (For the Network connection, refer to
page 44.)
Examples for BD-Live interactive functions :
• Download the additional contents such as the movie’s
trailer, subtitles and BD-Java, etc.
• While downloading, special video data may be played
back.
- Service and functions differ depending on the disc.
Follow the instructions given by the disc when using
the BD-Live function.
- You must insert an SD memory card when using the
BD-Live function. (SD memory card of 1GB is
recommended.)
- Do not remove the SD Memory Card when using the
BD-Live function.
Note
• During the random playback, press [STOP C] once
to set the resume point, and then press [PLAY B] to
resume random playback from where [STOP C] was
pressed (audio CD) or from beginning of the file
where [STOP C] was pressed (MP3/WMA/JPEG).
• To repeat the current track / file in the random
selection, press [REPEAT] repeatedly until
“ Track” appears during playback. To repeat
the entire random selection press [REPEAT]
repeatedly until “ All” appears during playback.
• Playback from a desired track / file is not available
during random playback.
• Press [BACK U] to switch to the program playback
mode.
Slide Show
Note
• Large-size JPEG files take a few moments to be
displayed.
PiP (BONUSVIEW) Setting
Primary
video
Secondary
video
Enjoying BD-Live Discs with Internet
Note
• You must connect the unit to the Internet and set up
necessary settings in order to use the BD-Live
function.
• For certain discs, setting for “BD-Live Setting” may
need to be changed.
• Depending on your connection environment, it may
take time to connect to the Internet or the Internet
may not be connected.
• When BD-Live functions are used and the unit is
connected to the Internet, you may be charged for
this communication.
• Some discs with BD-Live function require memory
when playing back the content. If you cannot play
back a disc with BD-Live function, insert an SD
card(1GB or more) which is formatted on this unit.
Note for AACS Online
• The player or disc IDs may be sent to the content
provider when playing back a disc with BD-Live
function.
• If you save your viewing history on the server by
using these IDs, you will be introduced to other
similar movies.
• You can save game score histories.
29
SPECIAL PLAYBACK
EN
1) During playback, press [NEXT T] to move to the
next track / title / chapter / file. Press it repeatedly to
skip to subsequent tracks. Press [PREV S] once to
go back to the beginning of the current track. Press
it repeatedly to go to the previous tracks.
• For JPEG files, press [PREV S] to go back to the
previous file.
By using [SEARCH], you can select the following search
modes.
1) During playback, press [SEARCH] repeatedly until
your desired search mode appears.
2) Enter the desired chapter, title, track, file number or
time to search for using [the Number buttons].
• Chapter, title, track or time search will start.
•Press [CLEAR] to erase an incorrect input.
Title Search
1) In stop mode, enter the title number you want to
search using [the Number buttons].
Playback of the title will start in a few seconds.
Chapter Search
1) During playback of a title, enter the chapter number
you want to search using [the Number buttons].
Playback of the chapter will start in a few seconds.
Track Search
1) During playback of a title, enter the track number
you want to search using [the Number buttons].
Playback of the track will start in a few seconds.
This feature allows you to assign a specific point on a title
to be called back later.
1) During playback, press [SEARCH] repeatedly until
the marker setting menu appears.
2) Use [s/B] to select a marker number (1-9).
3) When the disc reaches the point at which you want
to set a marker, press [OK].
• The title and elapsed playback time will appear on the
TV screen.
4) Press [SEARCH] or [RETURN] to exit.
5) To return to the marker later, call the marker setting
by pressing [SEARCH] repeatedly during playback
or in stop mode, and use [s/B] to select a desired
marker, then press [OK].
Some BD and DVD may have subtitles in 1 or more
languages. For commercially available discs, the
supported languages can be found on the disc case.
Follow the steps below to switch the subtitle languages
during playback.
1) During playback, press [SUBTITLE] repeatedly to
display “Primary Subtitle”, “Secondary Subtitle” or
“Subtitle Style”.
Search
Using [PREV S] / [NEXT T]
Note
• For BD and DVD, if title contains no chapters,
[PREV S]/[NEXT T] changes the title.
• For JPEG files, [s/B] is also available.
Using [SEARCH]
Search mode Available media
/
Chapter / Title search
Track search
Time search
Marker search
Note
• During program and random playback, search
functions are not available except the search using
[PREV S]/[NEXT T].
• Time search is available only in the same track, file or
title.
• For BD, chapter and time search are available only
during playback.
Using [the Number buttons] (Direct Search)
Note
• As for the BD-video, how it performs will be strongly
determined by the disc, and may not perform as
described.
Marker Search
Note
• Opening the disc tray, changing to the standby
mode, or selecting “ ” at step 2 and pressing [OK]
will erase all markers.
• To clear a marker, use [s/B] to select the marker
number to be cleared and press [CLEAR].
• You can mark up to 9 points.
• For BD, marker search between different titles is not
available.
• For BD, you can return to the marker only during
playback.
Switching Subtitles
“Primary Subtitle” : Sets the subtitle for the primary
video.
“Secondary Subtitle”: Sets the subtitle for the
secondary video.
“Subtitle Style” : Sets style of the subtitle.
Bookmark Title 001 0:10:23
01 02 03 04 05 06 07 08 09 AC
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
30
SPECIAL PLAYBACK
EN
2) Use [K/L] to select your desired subtitle or style.
•Use [s/B] to switch between current subtitle
setting and “Off”.
3) Press [BACK U] repeatedly to exit.
1) During playback, press [SUBTITLE].
2) Use [K/L] to select your desired subtitle.
•Use [s/B] to switch between current subtitle
setting and “Off”.
3) Press [BACK U] to exit.
Some BD and DVD contain multiple audio streams. Those
are often in different audio languages or audio formats.
For BD, available audio varies depending on “Blu-ray Disc
Audio” setting. Refer to page 38 for more information.
1) During playback, press [AUDIO] repeatedly to
display “Primary” or “Secondary”.
2) Use [K/L] to select your desired audio stream
channel.
• For “Secondary”, use [s/B] to switch between
current audio setting and “Off”.
3) Press [AUDIO] repeatedly to exit.
1) During playback, press [AUDIO].
2) Use [K/L] to select your desired audio stream
channel.
3) Press [BACK U] to exit.
1) During playback, press [AUDIO].
2) Use [K/L] to select your desired audio stream
channel.
3) Press [BACK U] to exit.
Some BD-video and DVD-video contain scenes which have
been shot simultaneously from various angles. You can
change the camera angle when appears on the TV
screen.
1) During playback, press [ANGLE].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2) Use [K/L] to select your desired angle.
3) Press [BACK U] to exit.
Note
• Some discs will only allow you to change the
subtitles from the disc menu or pop-up menu. Press
[TOP MENU] or [DISC MENU / POP-UP MENU] to
display the disc menu or pop-up menu.
• If the disc has no subtitle language or subtitle style,
“Not Available” will be displayed on the TV screen.
• During playback of the secondary video, the primary
subtitle setting is not available except when there is
no subtitle for the secondary video.
• For DivX® external subtitle, “Playing Back a DivX®
with DivX® External Subtitle” on page 25.
Switching Audio Soundtrack
“Primary” : Sets the audio for the primary video.
“Secondary” : Sets the audio for the secondary video.
1
Primary Subtitle ENG / 255
1
ENG / 32
1
Primary ENG Dolby D+ Multi-ch / 3
1
ENG Dolby D 3/2.1ch 48k
/
3
e.g.) DVD-video
Note
• The secondary audio will not be output when the
secondary video is not displayed or when “Blu-ray
Disc Audio” is set to “Primary Audio Only”. (For some
BD, secondary audio will be output even when
secondary video is off.)
• The audio stream channel cannot be changed during
playback of discs not recorded in multiple audio.
• Some discs allow changing the audio language
setting on the disc menu. (Operation varies
depending on the discs. Refer to the manual
accompanying the disc.)
•[AUDIO] may not work on some discs with multiple
audio streams or channels (e.g. DVDs that allow
changing audio setting on the disc menu).
• If the disc has no audio language, “Not Available” will
be displayed on the TV screen.
• For DTS-CD (5.1 music disc), “DTS” will be displayed.
(Selecting audio streams or channels is not
available.)
Switching Camera Angles
Note
• If “Angle Icon” setting is set to “Off”, will not
appear on the TV screen. (Refer to page 39)
Stereo
2 / 5
31EN
PLAYBACK-iPod
Music/video on your Apple iPod can be played on this unit
with the support of the docking station. It enables you to
enjoy the superior sound output from the speaker system.
The docking station supports the following iPod range:
The supplied docking station has an adjustable support to
fit varies iPod range.
If your iPod cannot be fixed to the docking station,
adjust the support as below:
1) Turn the knob at the bottom of the docking station
counter-clockwise to loosen the support.
2) Adjust the support until it can fit your iPod.
3) Turn the knob clockwise to tighten it.
1) Connect the docking station to the iPod DOCK jack
on this unit.
2) Dock your iPod in the docking station and turn it on.
3) Press [SOURCE] repeatedly until “iPod” appears on
the front panel display.
4) Start playback on your iPod.
The audio of iPod will be output from the speakers.
• You can use the remote control to control the music:
Playing Music from Compatible iPod
Device
iPod 4th gen (color display) 20GB, 30GB, 40GB, 60GB
iPod 4th gen 20GB, 40GB
iPod 5th gen (Video) 30GB, 60GB, 80GB
iPod Nano 1st gen 1GB, 2GB, 4GB
iPod Nano 2nd gen
(aluminum)
2GB, 4GB, 8GB
iPod Nano 3rd gen (Video) 4GB, 8GB
iPod Mini 4GB, 6GB
iPod Touch Ver 2.1 8GB, 16GB
iPod Classic 80GB, 160GB
Preparing the Docking Station
Playing from iPod
support knob
VOLUME
PUSH
Button Action
Cursor K/LSelect item or track
OK Go to the next hierarchy or start
playback
BACK UReturn to the previous menu screen
VOL ⴐ / ⴑAdjust the volume level
STOP CStop the playback
PAUSE FPause the playback
PREV S/NEXTTGo to the previous / next track during
playback
REW E/ FFW DPress and hold to search backward /
forward during playback
REPEAT Press repeatedly to select the repeat
mode. (Repeat One, All or Off)
SEARCH Press repeatedly to select the shuffle
mode. (Shuffle Songs, Albums or Off)
MODE
Select between Extended mode and
Simple mode.
Extended mode (*Default setting):
Control the iPod playback in the menu
screen of this unit.
Simple mode:
Control the iPod playback on iPod click
wheel.
Note
• Whenever this unit is powered up and the docking
station is connected to it, the battery of the docked
iPod will be charged automatically.
• Compatibility depends on the software version of
your iPod.
• Audio / Video cannot be recorded or transmitted to
iPod via this unit.
• Later generations of iPod models and iPhones are
not supported.
• In simple mode, playback of video is not available.
• Photos on your iPod cannot be played on this unit.
• Depending on the software version of your iPod,
you may need to update the software.
Please download the latest software version at:
www.apple.com/support/
• You may be charged for software update depending
on the iPod model.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
EN32
RADIO OPERATIONS
Before you start .....
Connect the supplied FM wire antenna to the inner pin of
the FM ANT 75Ω jack. Extend the FM antenna and fix its
ends to the wall for optimum reception.
1) Press [SOURCE] repeatedly until “FM” appears on
the front panel display.
2) Press [s/B] on the remote control to start tuning.
The frequency indication starts to change until a radio
station with sufficient signal strength is found.
3) Repeat step 2) if necessary until you find the desired
radio station.
4) To fine-tune the reception of a weak station, press
[K/L] briefly and repeatedly until an optimal
reception is found.
You can store up to 15 FM preset radio stations in the
memory. To store the radio stations, follow the following
procedure.
1) Tune to your desired radio station (see “Tuning to
Radio Stations” on this page).
2) Press [OK].
3) Press [PREV S/NEXTT] or use [the Number
buttons] to select a preset number that you want to
store the current radio station.
4) Press [OK] to store.
1) Press [SOURCE] repeatedly until “FM” appears on
the front panel display.
2) Press [PREV S/NEXTT] or use
[the Number buttons] to select a preset radio
station.
The preset number and radio frequency appear on the
front panel display.
1) In FM mode, press [PREV S/NEXTT] to select a
preset radio station.
2) Press and hold [STOP C] until “DELETED” appears
on the front panel display.
• The radio station continues to play but has been
deleted from the preset list.
• The rest of the preset radio stations remain
unchanged.
Note
• For better FM stereo reception, connect an external
FM antenna (not supplied).
• Position the antenna as far away as possible from
your TV, VCR or other radiation source to prevent any
unwanted interference.
Tuning to Radio Stations
Presetting Radio Stations
Note
• This unit exits presetting mode if no button is
pressed within 20 seconds.
• If no stereo signal is detected or less than 5 (five)
stations are detected during radio installation,
“CHECK ANTENNA” appears on the front panel
display.
Selecting a Preset Radio Station
Deleting a Preset Radio Station
33EN
LIST OF SETTINGS
In the settings menu, you can customize the various kinds of settings as you prefer.
Refer to the following instruction to navigate through the settings menus.
1) Press [HOME ] to access the home menu.
2) Use [K/L] to highlight the desired setting, then press [OK].
3) Use [K/L] to move the highlight up and down in the list.
Options of the highlighted item will be displayed in the list on the right whenever available.
4) To make a selection or to access the options of an item, highlight the desired item, then press [OK].
5) Press [HOME ] to exit.
Refer to the following table for the types of settings you can customize.
The item highlighted in gray is the default setting.
Category Menus/Options Description
General
Setup
OSD Language English
Español
Français
Select the menu language for OSD (on-
screen display).
“Auto”:
Activates the Get & Set Menu Language
function. (Refer to page 41).
• “Auto” is available only when “EasyLink
(CEC)” is set to “On”.
• Inside the parenthesis next to “Auto” will
be the current selected language.
Auto (XXXX)
Display Dim 100% Select the brightness of the front panel
display.
“100%”:
Full brightness.
“70%”:
Medium brightness.
“40%”:
Dimmest display. This switches off all LEDs
and icons on the front panel display of this
unit.
70%
40%
Screen Saver On The screen saver prevents damage to the
TV screen by avoiding exposure to a static
image for too long.
“On”:
Switches to TV screen saver mode when
playback has been stopped or paused for
more than 5 minutes only BD Function.
“Off”:
Disables the screen saver function.
Off
Sleep Timer 15 min
30 min
45 min
60 min
The sleep timer enables the unit to switch
to standby mode automatically after the
selected preset time.
“15/30/45/60 min”:
Select the preset minutes for switching the
unit to standby mode automatically.
“Off”:
Turns off the sleep mode function.
Off
Auto Standby On “On”:
Sets whether to turn off the unit (to the
standby mode) automatically after 25
minutes of no action since the screen saver
is activated.
• If the screen saver is off, the unit will be
turned off after 30 minutes if no action.
“Off”:
Turns off the standby mode feature.
Off
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
34
LIST OF SETTINGS
EN
Category Menus/Options Description
Video
Setup
Video Resolution
• Refer to page 41 for
more information.
Auto Sets the resolution of the video signal
being output from the HDMI OUT/
COMPONENT VIDEO OUT/VIDEO OUT.
• The selected resolution must also be
supported by your TV monitor.
480i
480p
720p
1080i
1080p
HDMI Setup Deep Color
• This feature is available
only when the display
device is connected by
an HDMI cable, and
when it supports Deep
Color feature.
Auto Reduces the posterization effect of the
playback picture.
“Auto”:
Reduces the posterization effect by
automatically outputting the 12 bit color
whenever the unit recognizes the
connected display device supports Deep
Color feature.
“Off”:
Outputs the standard 8 bit color.
Off
EasyLink (CEC)
• This feature is available
only when the display
device is connected with
an HDMI cable, and
when it supports
EasyLink (CEC) feature.
• Refer to page 41 for
more information.
On Sets whether to utilize the EasyLink (CEC)
function. EasyLink (CEC) function allows
your PHILIPS brand EasyLink TV to act in
conjunction with this unit or vice versa.
Off
Black Level On You can adjust the black level setting to
make the black parts of the picture
as bright as you refer.
“On”:
Makes the dark parts brighter.
“Off”:
Shows the original picture as recorded.
Off
Noise Reduction
• Not available for
BD-video.
Off Reduces the noise of the playback picture.
“Off”:
Shows the original picture as recorded.
Turns off noise reduction feature.
“Low”:
Executes MPEG noise reduction which
reduces the block noise and Mosquito
noise on the subtitle on movie by 50%
from the original picture.
“High”:
Executes MPEG noise reduction which
reduces the block noise and Mosquito
noise on the subtitle on movie by 90%
from the original picture.
Low
High
35
LIST OF SETTINGS
EN
Category Menus/Options Description
Audio
Setup
Speaker Setup Speaker
Configuration
Configuration 0 LLLY (F/C/S/SUB) Selects the desired speaker to set. Only 3
states.
“Configuration 0”:
Left(Large), Right(Large), Center(Large),
Surround Left(Large), Surround
Right(Large), Subwoofer(Yes)
“Configuration 1”:
Left(Small), Right(Small), Center(Small),
Surround Left(Small), Surround
Right(Small), Subwoofer(Yes)
“Configuration 2”:
Left(Large), Right(Large), Center(Small),
Surround Left(Small), Surround
Right(Small), Subwoofer(No)
Configuration 1 SSSY
Configuration 2 LSSN
Test Tone & Level Front Left
-10dB ~
+10dB
default is 0dB Sets the volume level for each speaker to
get the ideal audio balance.
Use [K/L] to set the volume level of the
highlighted speaker between -10dB ~
+10dB.
Center default is 0dB
Front Right default is 0dB
Surround Right default is 0dB
Surround Left default is 0dB
Subwoofer default is 0dB
Speaker Distance Unit of Measure Feet Sets the desired measure system.
This measure system will be used for
“Speaker Distance” setting.
Meters
Front Left
Feet:
0~10
Meters:
0~3
default is 3 Select the distance from the listening
point to the speaker to get the ideal delay
time.
Center default is 3
Front Right default is 3
Surround Left default is 3
Surround Right default is 3
Subwoofer default is 3
Sound Mode Off Select a preset digital sound effect that
matches your disc’s content or optimizes
the sound of the musical style you are
playing.
• You can also change the sound mode by
pressing [SOUND MODE] repeatedly
during playback.
“Off”:
Turns off Sound Mode feature.
“Concert / Classic”:
Flat and pure sound mode. Ideal for
listening to classical music and watching
live concert BDs/DVDs.
“Drama / Lounge”:
Moderate sound mode suitable for lounge
music and watching drama.
“Action / Rock”:
Enhanced low and high range great
sounding movie effects and atmosphere.
Great for action movies and rock/pop
music.
“Gaming / Sports”:
Moderate mid range and sound effects for
clear vocal and the atmosphere of live
sports venue. Also suitable for video game.
“Night / Night”:
Dynamically controlled sound mode
suitable for watching movies at night or
for non-intrusive background music.
Concert / Classic
Drama / Lounge
Action / Rock
Gaming / Sports
Night / Night
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
36
LIST OF SETTINGS
EN
Category Menus/Options Description
Audio
Setup
HDMI Audio
•This feature is
available only
when the
display device is
connected by an
HDMI cable.
• Refer to page 42
for more
information.
PCM
Normal(Bitstream)
Sets the audio format for the sound output
from the HDMI OUT.
“PCM”:
The Multi-channel or stereo audio signals are
output from HDMI OUT jack with PCM.
“Normal(Bitstream)”:
The Multi-channel audio signals are output
from HDMI OUT jack with bitstream or PCM
depending on EDID information.
“Off”:
Mutes the HDMI audio signal.
Off
Audio Sync Auto This feature allows you to adjust the audio
delay times if the video playback is slower
than the audio output streams. Use [K/L] to
set the delay times for the audio output
between 0 ~ +200ms.
0 ~ +200ms default is 0ms
Listening Mode
Setup
Listening Setup 2 Channel None
PLII Music
PLII Movie
Depending on the format of currently
selected input (Digital or analog, stereo or
multichannel), various listening modes are
available.
• You can also change the listening mode by
pressing [SURROUND] repeatedly during
playback.
Surround None
PLII Music
PLII Movie
Dolby Digital
Stereo
DTS None
NEO : 6 Music
NEO : 6 Cinema
Stereo
PCM None
5ch Stereo
NEO : 6 Music
NEO : 6 Cinema
PLII Music
PLII Movie
Dolby Setup Dyn Range Ctrl Off
Min
Mid
Max
You can select the effective dynamic range
(subjective range from soft to loud) for the
playback of Dolby Digital soundtracks. For
fully cinematic effect, reduce dynamic range,
making soft sounds comparatively louder
while limiting the peak loudness of loud ones.
“Off”:
Turns off the dynamic range control feature.
“Min”:
25% Progressively Dynamic Range.
“Mid”:
50% Progressively Dynamic Range.
“Max”:
100% Progressively Dynamic Range.
“Auto”:
This feature only works on Dolby TrueHD
Soundtrack.
Auto
Center Width 0
1
2
Modifies the ‘hard-centeredness’ of the
center audio output, by gradually mixing
mono center content to the Front left/right
speakers as well.
A setting of 0 retains the center-channel-only
default while a setting of 7 yields a fully
phantom center channel.
3
4
5
6
7
Dimension 3
2
1
Adjusts front-rear emphasis of the sound
effect independently from the relative
channel levels.
0
-1
-2
-3
37
LIST OF SETTINGS
EN
Category Menus/Options Description
Audio
Setup
Panorama Off Adds a ‘wrap around’ effect by
extending some stereo content into
the sound channels.
“Off”:
Turns off panorama feature.
“On”:
Turns on panorama feature.
On
DTS Setup Center Gain 0
0.1
Adjust for better center image in
relation to the surround sound
channels.
0.2
0.3
0.4
0.5
Listening
Viewer
Display the current status of listening
mode setup.
Play Disc
Setup
Quick
Media Select Disc Select the media to playback.
SD Card
Blu-ray Disc Audio Mix Audio Output Sets the disc audio of Blu-ray Disc
playback.
Primary Audio Only
Play Disc
Setup
Custom
Language Audio Original Sets the audio language for BD-video
or DVD-video playback.
English
French
Spanish
German
Italian
Swedish
Dutch
Russian
Chinese
Japanese
Korean
Danish
Finnish
Norwegian
Icelandic
Hungarian
Romanian
Turkish
Greek
Irish
Portuguese
Polish
Czech
Slovak
Bulgarian
Other
Subtitle Off Sets the subtitle language for BD-video
or DVD-video playback.
English
French
Spanish
German
Italian
Swedish
Dutch
Russian
Chinese
Japanese
Korean
Danish
Finnish
Norwegian
Icelandic
Hungarian
Romanian
Turkish
Greek
Irish
Portuguese
Polish
Czech
Slovak
Bulgarian
Other
Disc Menu English Sets the language for disc menu.
French
Spanish
German
Italian
Swedish
Dutch
Russian
Chinese
Japanese
Korean
Danish
Finnish
Norwegian
Icelandic
Hungarian
Romanian
Turkish
Greek
Irish
Portuguese
Polish
Czech
Slovak
Bulgarian
Other
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
38
LIST OF SETTINGS
EN
Category Menus/Options Description
Play Disc
Setup
Custom
Audio & Video TV Shape
• Refer to page 43
for more
information.
4:3 Letter Box
4:3 Pan & Scan
16:9 Widescreen
Sets the aspect ratio of the playback
image to fit your TV.
16:9 Squeeze
BD-Video 24p
Output
•This feature is
available only
when the display
device is
connected by an
HDMI cable.
• Refer to page 41
for more
information.
Auto “Auto”:
Outputs the picture in 1080p/24 (1080
progressive with 24 frames per second)
when it meets all the conditions listed
below:
• The video resolution and the frame rate
of the material is 1080p/24 .
• “Video Resolution” setting is set to
“Auto”.
• The display device supports the 1080p/
24 output.
“Off”:
Outputs the picture in 60p. (60 frames per
second, progressive)
Off
Still Mode Auto Adjusts picture resolution and quality in
still mode.
“Auto”:
Automatically selects the best resolution
setting (“Frame” or “Field”) based on the
data characteristics of the pictures.
“Field”:
Stabilizes the pictures, although the
picture quality may become coarse due
to the limited amount of data. Select
“Field” when the pictures are still unstable
even if “Auto” is selected.
“Frame”:
Displays relatively motionless pictures in
higher resolution. “Frame” improves the
picture quality, although it may
unstabilize the pictures due to alternate
output of 2-field data.
Field
Frame
Blu-ray Disc Audio Mix Audio Output “Mix Audio Output”:
The audio for the secondary video and
the interactive application will be output
together with the audio for the primary
video.
“Primary Audio Only”:
Only the audio for the primary video will
be output.
When playing back a BD-video which only
contains the primary audio, the audio
output will be the same case as the
“Primary Audio Only” even if the “Blu-ray
Disc Audio” is set to “Mix Audio Output”.
Primary Audio Only
Parental
• Refer to page 43
for more
information.
Rating Level All Sets the rating level for the disc playback.
8 [Adult]
to
1 [Kid Safe]
Password Change Password Input
Other Media Select Disc Select the media to playback.
SD Card
Slide Show Interval 5sec Sets the amount of time for displaying
one picture before switching to the next
one.
For example, select “5sec” to switch the
picture every 5 seconds.
10sec
39
LIST OF SETTINGS
EN
Category Menus/Options Description
Play Disc
Setup
Custom
Other Angle Icon On “On”:
The angle icon appears on the TV
screen when playing back the
scene with various angle.
“Off”:
The angle icon disappears on the
TV screen.
Off
DivX(R) VOD Registration
Code
Your registration code is :
cccccccccc
To learn more visit
www.divx.com/vod
This menu item provides you with
the DivX® VOD registration code.
The DivX® registration code is
required when downloading the
DivX® VOD files from the Internet.
To learn more about DivX® VOD,
visit
www.divx.com/vod.
Deactivation
Code
Your deactivation code is :
cccccccc
To learn more visit
www.divx.com/vod
This menu item provides you with
the DivX® VOD deactivation code.
The DivX® deactivation code is
required when re-downloading
the DivX® VOD files from the
Internet after deactivating. To
learn more about DivX® VOD, visit
www.divx.com/vod.
Deactivation Yes
No
This menu deactivates the DivX®
VOD files and provides you with
new registration code and
deactivation code in order to
playback the DivX® VOD files
downloaded from the Internet.
Network
Connection
• Refer to page 44
for more
information.
Connection
Test
Perform the network connection
test. After you change the IP
address or DNS setting, always
perform this test.
Enable(Easy)
If you select “Enable(Easy)”,
Connection Test will
automatically start.
Enable(Custom) IP Address
Setting
Auto(DHCP) Set the IP Address.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual IP Address
Subnet Mask
Default
Gateway
DNS
Setting
Auto(DHCP) Set the DNS Setting.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual Primary DNS
Secondary
DNS
Proxy
Setting
Do Not Use Set the Proxy server.
In most cases, you can connect to
the Internet without using Proxy
server.
Use Proxy
Address
Proxy Port
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
40
LIST OF SETTINGS
EN
Category Menus/Options Description
Play Disc
Setup
Custom
Other Network
Connection
Enable(Custom) Connection
Speed
Auto Set the Connection Speed.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
10BASE Half
10BASE Full
100BASE Half
100BASE Full
BD-Live Setting Allow You can restrict Internet access
when BD-Live functions are used.
Limited Allow
Prohibit
Network Status You can check the current status
of the Network setting.
Disable Yes Deactivate the network
connection.
No
Software
Upgrade
Software version You can check the current
firmware version.
Disc Upgrade Yes Set the Disc Upgrade.
You can upgrade the firmware
version by using the disc.
To download the latest firmware
version, please visit
www.philips.com/support.
No
Network
Upgrade
Yes Set the Network Upgrade.
You can upgrade the firmware
version by connecting this unit to
the Internet.
No
Play Disc
Setup
Initialize
Format SD
Card
Yes “Yes”:
Re-format SD Card.
“No”:
Does not perform the
initialization.
No
Local Storage Player Yes “Yes”:
Re-format local storage (Player)
used for BD-Java.
“No”:
Does not perform the
initialization.
No
SD Card Yes “Yes”:
Re-format local storage (SD Card)
used for BD Java.
“No”:
Does not perform the
initialization.
No
Network
Settings
Yes “Yes”:
Initialize network settings.
“No”:
Does not perform the
initialization.
No
Factory
Default
Settings Yes “Yes”:
Resets all the settings, except for
“Parental” and “Network
Connection”, in “Settings” to the
factory default.
“No”:
Does not perform the
initialization.
No
41EN
SETUPS
Set the resolution of the video signal being output from
the HDMI OUT/ COMPONENT VIDEO OUT/ VIDEO OUT.
You can select the desired “Video Resolution” among the
settings listed below:
“Auto”,“480i”,“480p”,“720p”,“1080i”,“1080p”
• When you make a selection, the TV monitor temporarily
goes blank and then comes back again. If it does not,
press and hold [B(PLAY)] on the front panel for 5
seconds to change the setting back to its default.
Actual Output Resolution by Media:
• Composite video out (VIDEO OUT) can only output
480i/60.
• When outputting 24 Hz or 60 Hz signal from the HDMI
OUT, no signal will be output from the COMPONENT
VIDEO OUT and the VIDEO OUT.
• HDMI OUT cannot output 480i/60.
• COMPONENT VIDEO OUT cannot output 1080p/60.
• When HDMI cable is connected, “480i” will be grayed out.
• When HDMI cable is not connected, “1080p” will be
grayed out.
EasyLink (CEC) function allows your TV (limited to PHILIPS
brand EasyLink TV) to act in conjunction with this unit, or
vice versa.
When “EasyLink (CEC)” setting is set to “On”, functions
listed below will be available.
One Touch Play
When this unit is turned on, the TV also is turned on and
the appropriate external input channel will be selected
automatically. The appropriate external input channel
can also be selected on your TV automatically when you
press [PLAY B], [PREV S], [NEXT T],
[the Number buttons], [HOME ], [INFO ],
[TOP MENU], or [DISC MENU / POP-UP MENU] when
the unit’s power is on.
Standby
When you press and hold [STANDBY-ON Q]
for 2 seconds, it turns off the power of the TV first and
then turns off the power of this unit also.
System Information
Get & Set Menu Language
The unit recognizes the OSD language set for the TV and
automatically sets the same language as the player
menu language (OSD menu language) for this unit.
Refer to the “OSD Language” on page 33 for available
languages.
• This feature is available only when “Auto” is selected in
the “OSD Language” in the settings menu.
Video Resolution
HOME A“Video Setup” A“Video Resolution”
Media BD
Setting in
the “Video
Resolution”
Source
480i/60 720p/60 1080i/60 720p/24 1080p/24
480i 480i/60 480i/60 480i/60 480i/60 480i/60
480p 480p/60 480p/60 480p/60 480p/60 480p/60
720p 720p/60 720p/60 720p/60 720p/60 720p/60
1080i 1080i/60 1080i/60 1080i/60 1080i/60 1080i/60
1080p 1080p/60 1080p/60 1080p/60 1080p/60 1080p/60
Auto The highest resolution supported by your display device
will be in effect automatically.
Media DVD DivX® Photo
viewing
OSD-only
viewing
Setting in the
“Video
Resolution”
Source
480i/60 60,30,other
480i 480i/60 480i/60 480i/60 480i/60
480p 480p/60 480p/60 480p/60 480p/60
720p 720p/60 720p/60 720p/60 720p/60
1080i 1080i/60 1080i/60 1080i/60 1080i/60
1080p 1080p/60 1080p/60 1080p/60 1080p/60
Auto The highest resolution supported by your display
device will be in effect automatically.
Note
• The selected resolution must also be supported by
your display device.
• If your TV and the unit is connected by a DVI cable
and if you select “Auto”, “480p” will be in effect
automatically.
•Pressing [B(PLAY)] on the front panel for 5 seconds
changes the setting back to its default.
• Refer also to your TV’s manual.
• If you select “Auto” when HDMI cable is not
connected, 480i will be output from the
COMPONENT VIDEO OUT.
EasyLink (CEC)
HOME A“Video Setup” A“HDMI Setup” A“EasyLink (CEC)”
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
42
SETUPS
EN
Refer to the table below to see which setting you should choose.
• When playing back a BD-video which only contains the primary audio, the audio output will be the same case as the
“Primary Audio Only” even if the “Blu-ray Disc Audio” is set to “Mix Audio Output”.
HDMI Audio
HOME A“Audio Setup” A“HDMI Audio”
“HDMI Audio” setting
A
“Normal(Bitstream)” “PCM” “Off”
“Blu-ray Disc Audio” setting
A
“Primary Audio
Only”
“Mix Audio
Output”
“Primary Audio
Only”
“Mix Audio
Output” Regardless
Media
ª
Audio Source
ª
Which audio format can be output depends on the compatibility of the
connected device.
BD-video
Dolby Digital
Dolby Digital
or
PCM
or
Mute
Dolby Digital
or
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute Mute
Dolby Digital Plus
Dolby Digital Plus
or
Dolby Digital
or
PCM
or
Mute
Dolby Digital
or
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute Mute
Dolby TrueHD
Dolby TrueHD
or
Dolby Digital
or
PCM
or
Mute
Dolby Digital
or
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute Mute
DTS
DTS
or
PCM
or
Mute
DTS
or
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute Mute
DTS-HD
DTS-HD
or
DTS
or
PCM
or
Mute
DTS
or
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute Mute
LPCM
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute
PCM
or
Mute Mute
DVD-video
Dolby Digital Dolby Digital, PCM or Mute PCM or Mute Mute
DTS DTS, PCM or Mute PCM or Mute Mute
LPCM 2ch PCM or Mute 2ch PCM or Mute Mute
DivX® AC3 AC3, PCM or Mute PCM or Mute Mute
MP3/MP2 2ch PCM or Mute 2ch PCM or Mute Mute
Audio CD/ MP3/
Windows Media™ Audio PCM 2ch PCM or Mute 2ch PCM or Mute Mute
DTS-CD DTS DTS, PCM or Mute PCM or Mute Mute
43
SETUPS
EN
Use this feature to adjust the aspect ratio of the video
source which is different from your TV’s ratio to fit your TV
monitor without distorting the picture. Descriptions of
each setting are as follows:
Some BD-video or DVD-video feature a parental lock level.
Playback will stop if the ratings exceed the levels you set, it
will require you to enter a password before the disc will
playback. This feature prevents your children from viewing
inappropriate material.
1) With “Parental” selected in the “Custom” menu,
press [OK].
2) If a password has not been set, proceed to step 2-a).
If a password has already been set, proceed to step
2-b).
If you want to change the password, proceed to
step 2-c).
If you forget the password, proceed to step 2-d).
2-a) Enter 4 digit password using
[the Number buttons].
• “4737” cannot be used.
2-b) Enter 4 digit password using
[the Number buttons].
2-c) Follow step 2-b). Select “Password Change”, then
press [OK]. Enter the new password.
2-d) Enter “4737”. Current password and the “Parental”
settings are now cleared. Follow step 1) and step
2-a) to create a new password.
TV Shape
HOME A“Play Disc Setup” A“Custom” A“TV Shape”
Video
source
Your
TV Option Description
16:9
4:3
4:3 Letter Box To enjoy 16:9
picture on 4:3
monitor:
16:9 picture is
scaled down until
the both sides of
the picture fits the
4:3 TV.
4:3 Pan & Scan To enjoy 16:9
picture on 4:3
monitor:
Both sides of the
picture are
trimmed to fit the
4:3 TV without
distorting the
aspect ratio of the
picture.
16:9
16:9 Widescreen To enjoy 16:9
picture on 16:9
monitor:
Select this setting
when you want to
enjoy 16:9 picture
on the 16:9 TV.
4:3
16:9 Squeeze To enjoy 4:3
picture on 16:9
monitor:
Use this setting to
display 4:3 picture
on the 16:9 TV
without distorting
the aspect ratio of
the picture.
Parental
HOME A“Play Disc Setup” A“Custom” A“Parental”
Language
Audio & Video
Parental
Others
Rating Level
Password Change
Password Input
Password Input
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
44
SETUPS
EN
3) After entering the password, “Rating Level”
appears. (If not, use [K/L] to highlight “Rating
Level”.) Select desired rating level then press [OK].
To cancel parental lock temporarily
Some discs allow you to cancel the parental lock
temporarily. With those discs, the message below will
appear when you try to play them back.
“Enter current password.”
Follow the instruction which appears on the screen to
cancel the parental lock. After entering the password,
“Rating Level” appears.
Select desired rating level, then press [OK].
Set up the network connection settings in order to use the
BD-Live function with a BD-Live disc.
After you made IP address/DNS settings or when a LAN
cable is connected, always perform the connection test to
check if the connection is correctly made.
1) Use [K/L] to highlight “Settings” in the home
menu, then press [OK].
2) Use [K/L] to highlight “Play Disc Setup”, then
press [OK].
3) Use [K/L] to highlight “Custom”, then press [OK].
4) Use [K/L] to highlight “Other”, then press [OK].
5) Use [K/L] to highlight “Network Connection”, then
press [OK].
6) Use [K/L] to highlight “Connection Test”, then
press [OK].
Connection test will start automatically and the test result
will appear right after the connection test finishes.
• “Testing...” : The test is in progress.
• “Pass” : Connection test is successfully completed.
• “Fail” : Connection test failed. Check the connection
settings.
Press [OK] to go to the list of network status confirmation
screen.
7) Press [OK] to go back to the previous screen, or
press [HOME ] to go back to the home menu.
RATING EXPLANATIONS
All • Parental Control is inactive; all discs
can playback.
8 [Adult] • DVD software of any grades (adult/
general/children) can be played
back.
7 [NC-17] • No one under 17 admitted.
6 [R] • Restricted; under 17 requires
accompanying parent or adult
guardian.
5 [PGR] • Parental Guidance Recommended.
4 [PG-13] • Unsuitable for children under 13.
3 [PG] • Parental Guidance suggested.
2 [G] • General Audience.
1 [Kid Safe] • Suitable for children.
Rating Level
All
8 [Adult]
7 [NC-17]
6 [R]
5 [PGR]
4 [PG-13]
3 [PG]
2 [G]
Password Change
Network Connection
Connection Test
HOME
A
“Play Disc
Setup”
A
“Custom”
A
“Other”
A
“Network
Connection”
A
“Connection
Test”
Note
• If the connection test passes, you can enjoy the BD-
Live functions using the Internet without making any
extra settings.
• If the connection test fails, you may need to change
the MAC address settings of your router. You can
check the MAC address of this unit on “Network
Status” screen. (refer to page 47).
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
then press 'OK'.
45
SETUPS
EN
Network settings are set to the following settings initially.
(In most cases, you can connect to the Internet without
making any changes to the default settings.)
If you want to set the network settings back to the default
settings as above (except “BD-Live Setting”), follow the
procedure below.
1) Follow steps 1) to 5) in “Connection Test” on page
44.
2) Use [K/L] to highlight “Enable(Easy)”, then press
[OK].
• The unit will start the connection test automatically
and the test result will appear right after the test
finishes.
• After the connection test finishes, press [OK] to go to
network status confirmation screen.
3) Press [OK] to activate the network settings and set
the network connection automatically. Press
[HOME ] to go back to the home menu.
In following cases, select “Enable(Custom)” to set each
setting as necessary.
- When connection test failed with the setting of
“Enable(Easy)”.
- When instructed by your Internet service provider to
make specific settings in accordance with your
network environment.
• IP Address Setting / DNS Setting
1) Follow steps 1) to 5) in “Connection Test” on page
44.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “IP Address Setting”, then
press [OK].
4) Use [K/L] to highlight the desired setting, then
press [OK].
If you select “Manual”, follow the following
instruction to set the IP address and DNS.
4-a) IP address setting screen will appear. Enter IP
address, subnet mask and default gateway with
cursor buttons and number buttons.
• Enter the IP address number after checking the
specifications of your router.
• If the IP address number is unknown, check the
IP address number of other devices. (e.g. PC
connected via LAN cable) and assign a different
number from those of other devices.
After you enter all correctly, press [OK] to go to the
DNS setting screen.
4-b) DNS setting screen will appear. Enter primary DNS
and secondary DNS with cursor buttons and
number buttons.
• Enter the numbers instructed by your Internet
provider.
• If the number is unknown, check the number of
other devices (e.g. PC connected via LAN cable)
and assign the same number.
4-c) After you enter all correctly, press [OK].
• Confirmation message will appear. Select “Yes”
to complete the settings.
5) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
Enable(Easy)
HOME A“Play Disc
Setup” A“Custom” A“Other” A“Network
Connection” A“Enable
(Easy)”
- IP Address Setting Auto(DHCP)
- DNS Setting Auto(DHCP)
- Proxy Setting Do Not Use
- Connection Speed Auto
- BD-Live Setting Allow
Note
• The setting of “BD-Live Setting” will not be set back
to the default, even if you follow the procedure.
Enable(Custom)
HOME A“Play Disc
Setup” A“Custom” A“Other” A“Network
Connection” A“Enable
(Custom)”
“Auto(DHCP)” : If your router has DHCP server function, select
“Auto(DHCP)”.
“Manual” : If your router does not have DHCP server
function, select “Manual”.
IP Address Setting
IP Address
Subnet Mask
Default Gateway
Clear OK
DNS Setting
Primary DNS
Secondary DNS
Clear OK
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Is Setting OK?
Ye s
No
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
46
SETUPS
EN
• Proxy Setting
1) Follow steps 1) to 5) in “Connection Test” on page
44.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “Proxy Setting”, then press
[OK].
4) Use [K/L] to highlight the desired setting, then
press [OK].
• For default settings, select “Do Not Use”.
• If you need to change the proxy setting as instructed
by your Internet service provider to set the
designated proxy address and port, select “Use”.
If you select “Use”, follow the following instructions
to set the proxy address and proxy port.
4-a) Proxy address setting screen will appear.
Enter proxy address.
• The keyboard screen will appear.
* These buttons can be used in other network settings.
After you enter all correctly, press [YELLOW] to go to
the proxy port setting screen.
4-b) Proxy port setting screen will appear. Enter proxy
port number with number buttons.
4-c) After you enter all correctly, press [YELLOW].
• Confirmation message will appear. Select “Yes”
to complete the settings.
5) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
• Connection Speed
You can set connection speed as your preference. (The
default setting is “Auto”.)
1) Follow steps 1) to 5) in “Connection Test” on page
44.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “Connection Speed”, then
press [OK].
4) Use [K/L] to highlight the desired setting, then
press [OK].
“Auto”:
Set the appropriate connection speed automatically, in
accordance with your network environment.
“10BASE Half”:
Set the connection speed to “10BASE Half”.
“10BASE Full”:
Set the connection speed to “10BASE Full”.
“100BASE Half”:
Set the connection speed to “100BASE Half”.
“100BASE Full”:
Set the connection speed to “100BASE Full”.
5) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
Note
• The range of input number is between 0 and 255.
• If you enter a number larger than 255, the number
will automatically be 255.
• The manually entered number will be saved even if
you change the setting to “Auto(DHCP)”.
• When you enter a wrong number, press [RED] to
cancel. (The number will be back to “0”.)
• If you want to enter 1 or 2 digit number in one cell,
press [B] to move on to the next cell.
• If the entered IP address or the default gateway or
primary DNS number is same as the default setting,
IP address setting will be set to “Auto(DHCP)”. (The
manually entered number will be saved.)
• When IP address setting is set to “Manual”, the
setting of DNS setting will automatically be “Manual”
and when IP address setting is set to “Auto(DHCP)”,
you can set either “Auto(DHCP)” or “Manual” for DNS
setting.
[K/L/s/B]: Move the highlight.
[the Number buttons] : Enter number.
[OK] : Enter the highlighted number/word.
*[RED] : Clear the entered number or word.
[GREEN] : Clear all the entered numbers or words.
[BLUE] : Switch between abc ? ABC ? @!?
*[YELLOW] : Set the entered number or word.
1
a
k
u
2
b
l
v
3
c
m
w
4
d
n
x
5
e
o
y
6
f
p
z
7
g
q
.
8
h
r
-
9
i
s
_
0
j
t
OK
xxxxxxxx_
Proxy Setting
Proxy Address
Clear All Clear OKa/A/@
Note
• The range of input number for the port number is
between 0 and 65535. (If you enter a number larger
than 65535, it will be regarded as 65535.)
• For proxy port, the selected ports may be blocked
and not be able to use depending on your network
environment.
• If the proxy address is entered with blank only, proxy
server setting will be set to “Do Not Use”.
Note
• Choose a connection speed in accordance with your
network environment.
• The network connection may be disabled depending
on the device, when the settings are changed.
x
Proxy Setting
Proxy Port
Clear OK
xxxxxxxxxxxxxxx
xxxxx
Proxy Address
Proxy Port
Is Setting OK?
Ye s
No
47
SETUPS
EN
• BD-Live Setting
You can limit the Internet access from the BD-Live
functions. (The default setting is “Allow”.)
1) Follow steps 1) to 5) in “Connection Test” on page
44.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “BD-Live Setting”, then
press [OK].
4) Use [K/L] to highlight the desired setting, then
press [OK].
“Allow”:
Internet access is permitted from all BD-Live contents.
“Limited Allow”:
Internet access is permitted only for BD-Live contents
which have content owner certificates. Internet access
without the certificates are prohibited.
“Prohibit”:
Internet access is prohibited from all BD-Live contents.
5) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
• Network Status
You can check the status of network settings.
1) Follow steps 1) to 5) in “Connection Test” on page
44.
2) Use [K/L] to highlight “Enable(Custom)”, then
press [OK].
3) Use [K/L] to highlight “Network Status”, then
press [OK].
• Network setting list will be displayed.
4) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
Deactivate all the network connection and settings.
1) Follow steps 1) to 5) in “Connection Test” on page
44.
2) Use [K/L] to highlight “Disable”, then press [OK].
3) Use [K/L] to highlight “Yes”, then press [OK].
4) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
You can upgrade the software by using disc.
1) Follow steps 1) to 4) in “Connection Test” on page
44.
2) Use [K/L] to highlight “Software Upgrade”, then
press [OK].
3) Use [K/L] to highlight “Disc Upgrade”, then press
[OK].
4) Use [K/L] to highlight “Yes”, then press [OK].
5) Disc tray will open automatically.
• Insert the disc for software upgrade and then press
[OPEN/CLOSE A].
6) After completing loading disc, confirmation
message will appear. Use [s/B] to highlight “Yes”
and press [OK] to start upgrading.
• It may take a while to complete the upgrading.
7) After the disc upgrade finishes, this unit will restart
and open the disc tray automatically. Remove the
disc.
Disable
HOME A“Play Disc
Setup” A“Custom” A“Other” A“Network
Connection” A“Disable”
Note
• The network connection can be reactivated by
setting the network connection to “Enable(Easy)” or
“Enable(Custom)”.
Software Upgrade
Disc Upgrade
HOME A“Play Disc
Setup” A“Custom” A“Other” A“Software
Upgrade” A“Disc
Upgrade”
Note
• Please visit www.philips.com/support to download
the latest firmware version.
• Please do not unplug the AC power code while
executing the “Disc Upgrade”.
• All settings will remain the same even if you upgrade
the firmware version.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
48
SETUPS
EN
You can upgrade the software by connecting the unit to
the Internet.
1) Follow steps 1) to 4) in “Connection Test” on page
44.
2) Use [K/L] to highlight “Software Upgrade”, then
press [OK].
3) Use [K/L] to highlight “Network Upgrade”, then
press [OK].
4) Use [K/L] to highlight “Yes”, then press [OK].
• This unit will then start checking for the latest
firmware version.
5) Confirmation message will appear.
Use [s/B] to highlight “Yes”, then press [OK].
• The unit will start downloading the latest firmware
version.
6) When the download completes, confirmation
message will appear. Press [OK].
• The unit will start upgrading the firmware version.
• It may take a while to complete the upgrading.
7) After upgrading finishes, this unit will restart and
open the disc tray automatically.
Initialize the setting, SD Memory Card or network setting.
1) Use [K/L] to highlight “Factory Default” in the
home menu, then press [OK].
2) Use [K/L] to highlight the desired setting, then
press [OK].
“Settings”:
All the settings except for the “Parental” and “Network
Connection” setting will be reset to default.
“Format SD Card” (Available only when an SD
Memory Card is inserted):
Initialize the SD Memory Card.
“Local Storage”:
Local storage for Player or SD Card (Available only
when an SD Memory Card is inserted) used for BD-Java
will be initialized.
“Network Settings”:
Reset the network setting to the default.
3) Use [K/L] to highlight “Yes”, then press [OK].
• Confirmation message will appear. Press [OK] to
complete the setting.
4) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
Network Upgrade
HOME A“Play Disc
Setup” A“Custom” A“Other” A“Software
Upgrade” A“Network
Upgrade”
Note
• Please do not unplug the AC power cord or LAN
cable while executing the “Network Upgrade”.
• All settings will remain the same even if you upgrade
the software version.
• The disc tray will open automatically after upgrading
finishes. This is not a malfunction.
Reset to Factory Default
Note
• Do not remove the SD Memory Card while executing
the “Format SD Card” or “Local Storage” (SD Card). It
will damage the card.
• “Format SD Card” and “Local Storage” (SD Card) are
not available when a Blu-ray Disc is in the unit.
49EN
TROUBLESHOOTING
Problem Tip
POWER
No reaction to the remote control. Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries correctly.
Insert new batteries in the remote control.
No video signal on the display
device.
Turn on the TV.
Set the TV to the correct external input.
Select the correct video resolution in video setup.
Press and hold [B(PLAY)] on the front panel for 5 seconds to change the
setting back to its default.
No audio / video signal on the
display device via HDMI cable.
If the unit is connected to the unauthorized display device with an HDMI
cable, the audio/video signal may not be output.
No high-definition video signal on
the TV.
Does the disc contain high-definition video? High-definition video is not
available when the disc does not contain it.
Does the TV support high-definition video? High-definition video is not
available when the TV does not support it.
No audio signal from the
loudspeakers of the TV.
In the settings menu, set “HDMI Audio” to “PCM” or “Normal(Bitstream)”.
No audio signal from the speaker
system.
Increase the volume level of the speaker system.
In the settings menu, set “HDMI Audio” to “Off”.
GENERAL
No 5.1-channel audio from the
speaker system.
Does the disc contain 5.1-channel audio? The 5.1-channel audio is not
available when the disc does not contain it.
In the settings menu, set “HDMI Audio” to “Off”.
Cannot play back a disc. Make sure that the product supports the disc.
Make sure that the Blu-ray Disc player supports the region code of the DVD
or BD.
(BD: A: DVD: All or 1)
For DVD-RW/-R, make sure that the disc is finalized.
Clean the disc.
SD Memory Card cannot be read. The format of the card does not match that accepted by this unit or the card
is not compatible.
Cannot play back JPEG files from a disc.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Cannot play MP3 files from a disc. Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Make sure that the bit rate of the MP3 files is between 112 and 320 kbps.
Make sure that the sample rate of the MP3 files is 32kHz, 44.1kHz or 48kHz.
Cannot play back Windows Media™
Audio files from a disc.
Make sure that the sample rate of the Windows Media™ Audio files is 44.1
kHz or 48 kHz.
Cannot play back DivX® files from a
disc.
Make sure that the file extension is .avi, .AVI, .divx or .DIVX.
in the upper right hand corner
of the screen.
The operation is not possible.
Cannot find a JPEG file. Make sure that the selected group (folder) does not contain more than
9,999 files for DVD, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Cannot find an MP3 and Windows
Media™ Audio file.
Make sure that the selected folder does not contain more than 9,999 files
for DVD, and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3 for MP3, .wma or .WMA for
Windows Media™ Audio.
Error message appears when I
select “Auto” in the
“OSD Language”.
Make sure that the unit is connected to the PHILIPS brand EasyLink TV and
the “EasyLink (CEC)” is set to “On”.
This error message may appear when your TV’s OSD language is not
supported by this unit.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
50
TROUBLESHOOTING
EN
Problem Tip
GENERAL
Cannot connect to the network. Check if the LAN cable connection is properly made.
Turn on the modem or broadband router.
Check the network settings.
Check if the broadband router and/or modem is correctly connected.
Check the “BD-Live Setting”.
Cannot connect to the network
while my PC is connected to the
network.
Check the content of your Internet service contract to see if your Internet
Service Provider prevents multiple terminals connecting at the same time.
The capacity of the SD Card
decreased.
The data may be written to the SD card when a BD-video that supports the
virtual package is used and an SD card is in the slot.
MPEG-2 video and audio on the SD
card cannot be played back.
MPEG-2 is noncompliant on this unit.
The contents of the card cannot be
read.
The card is not compatible or the contents on the card may be damaged.
Turn off and then turn the unit on again.
No audio from iPod playback. Make sure the docking station is connected to this unit.
Radio reception is poor. If the signal is too weak, adjust the antenna or connect an external antenna
for better reception.
Increase the distance between this unit and your TV or VCR.
Tune in to the correct frequency.
Place the antenna further away from any equipment that may be causing
the interference.
Cannot use the BD-Live function or
download of data does not
perform properly.
Incert an SD card with enough space(1GB or more).
Check if an SD card is correctly inserted.
Cannot play back BD-video(BD-
ROM Profile 2.0).
Insert an SD card(1GB or more) which is formatted on this unit.
Some discs with BD-Live function require memory when playing back the
content.
Do not remove the card during playback.
51EN
GLOSSARY
Analog Audio
An electrical signal that directly represents sound.
Compare this to digital audio which can be an electrical
signal, but is an indirect representation of sound. See also
“Digital Audio”.
Aspect Ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the TV screen is
almost square); widescreen models are 16:9 (the TV screen
is almost twice as wide as it is high).
BD-Live
BD-Live is a BD-video (BD-ROM version 2 Profile 2.0) which
contains new functions (e.g. Internet connection), in
addition to the BONUSVIEW function.
Blu-ray Disc (BD)
Blu-ray Disc is a next generation optical video disc which is
capable of storing much more data than a conventional
DVD. The large capacity makes it possible to benefit from
the features such as high-definition videos, multi-channel
surround sounds, interactive menus and so on.
Chapter
Just as a book is split up into several chapters, a title on a
BD-video or DVD-video is usually divided into chapters.
See also “Title”.
Component Video Output
Each signal of luminance (Y) and component (PB/CB, PR/CR)
is independent to output so that you can experience
picture color as it is.
Also, due to compatibility with progressive video (525p/
480p), you can experience higher-density picture than that
in interlace (525i/480i).
Digital Audio
An indirect representation of sound by numbers. During
recording, the sound is measured at discrete intervals
(44,100 times a second for CD audio) by an analog-to-
digital converter, generating a stream of numbers. On
playback, a digital-to-analog converter generates an
analog signal based on these numbers. See also “Sampling
Frequency” and “Analog Audio”.
DivX®
DivX® is a codec (compression/decompression) that can
compress pictures to a very small amount of data. The
software can compress video data from almost any
devices to the size that can be sent on the Internet without
compromising visual quality of the pictures.
DNS Server
A server which translates Internet domain names into IP
addresses.
Dolby Digital
The system to compress digital sound developed by Dolby
Laboratories. It offers you sound of stereo (2ch) or multi-
channel audio.
Dolby Digital Plus
Dolby Digital Plus is the next generation digital audio
compression technology developed as an extension to
Dolby Digital. Blu-ray Disc supports 7.1 multi-channel
surround sound output.
Dolby® Pro Logic® II
Dolby® Pro Logic® II technology processes any high quality
stereo (two-channel) movie and music audio into five
playback channels of full-bandwidth surround sound. A
matrix surround decoding technology, Dolby Pro Logic II
detects the directional cues that occur naturally in stereo
content and uses these elements to create a five-channel
surround sound playback experience.
Dolby TrueHD
Dolby TrueHD is a lossless coding technology developed
for next generation optical discs. Blu-ray Disc supports
7.1 multi-channel surround sound output.
DTS (Digital Theater System)
DTS is a multi channel surround sound system. You can
enjoy movie dynamic and realistic sound like movie
theater. DTS surround sound technologies were
developed by DTS, Inc.
DTS-HD
DTS-HD is a lossless coding technology developed as an
extension of the original DTS Coherent Acoustics format.
Blu-ray Disc supports 7.1 multi-channel surround sound
output.
EasyLink
Philips EasyLink uses the HDMI CEC industry standard
protocol to share functionalities between the unit and its
connected devices. This feature is only available if you
connect this unit to a HDMI CEC compliant TV with a HDMI
cable.
Gateway
IP address of the electronic devices (such as router) which
provide Internet access.
HDMI (High Definition Multimedia Interface)
A digital interface between audio and video source. It can
transmit component video, audio, and control signal with
one cable connection.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
52
GLOSSARY
EN
Hub
A device used for connecting multiple device to the
network.
IP Address
A set of numbers which are assigned to devices
participating in a computer network.
JPEG (Joint Photographic Experts Group)
JPEG is a method of compressing still picture files. You can
copy JPEG files on CD-RW/-R, DVD or SD Memory Card
from a computer and play back the files on this unit.
LAN (Local Area Network)
A group of computer networks covering a small area like a
company, school or home.
MP3 (MPEG audio layer 3)
MP3 is a method of compressing files. You can copy MP3
files on CD-RW/-R, DVD-RW/-R or SD Card from the
computer and play back the files on this unit.
Local Storage
A storage area of sub contents for playing virtual packages
on BD-video.
PCM (Pulse Code Modulation)
The most common system of encoding digital audio,
found on CD and DAT. Excellent quality, but requires a lot
of data compared to formats such as Dolby Digital and
MPEG audio. For compatibility with digital audio recorders
(CD, MD and DAT) and AV amplifiers with digital inputs,
this unit can convert Dolby Digital and MPEG audio to
PCM. See also “Digital Audio”.
Proxy Server
Proxy server is a server which acts as an intermediary
between a workstation user and the Internet to ensure
security.
Region Code
Regions associate discs and players with particular areas of
the world. This unit will only play back discs that have
compatible region codes. You can find the region code of
your unit by looking on the rear panel. Some discs are
compatible with more than one region (or all regions).
Router
A networking device which distinguishes the IP address
assigned to each device and routing and forwarding
information in the computer network.
Sampling Frequency
The rate which sound is measured by a specified interval
to turn into digital audio data. The numbers of sampling in
one second defines as sampling frequency. The higher the
rate, the better the sound quality.
Subnet Mask
A mask which is used to determine what subnet an IP
address belongs to.
Title
A collection of chapters on BD-video or DVD-video. See
also “Chapter”.
Track
Audio CD use tracks to divide up the content of a disc. The
BD-video or DVD-video equivalent is called a chapter. See
also “Chapter”.
Virtual Package
The function which copies data to other media (local
storage) from the Internet and play the secondary video,
secondary audio and the subtitle at the same time. The
method of the playback varies depending on discs.
Windows Media™ Audio
Windows Media™ Audio is the audio compressing
technology developed by Microsoft. You can copy
Windows Media™ Audio files on CD-RW/-R, DVD-RW/-R or
SD Card from a computer and play them back on this unit.
53EN
SPECIFICATIONS
General
Signal system NTSC Color
Power requirements 120 V AC, 60 Hz
Power consumption 120 W (standby: 0.7 W)
Total output power (Amplifier) Home theater mode: 1000 W
FTC* output power : 745 W
*(Main Ch @ 1 kHz within 10% THD, Sub Ch 60 Hz within 2.5% THD)
Dimensions (width x height x depth) 17.2 x 2.75 x 15.3 inches (435 x 70 x 390 mm)
Weight Total weight: 35.3 lbs. (16 kg)
Main unit: 11 lbs. (5 kg)
Operating temperature 41°F (5°C) to 104°F (40°C)
Operating humidity Less than 80 % (no condensation)
Terminals
Front
SD Card slot
slot x 1
iPod dock jack
Docking station
Dimensions: ø4.09 x 1.36 inches (ø103.8 x 34.6 mm)
Weight: 0.33 lbs. (0.15 kg)
Rear
Audio output (Analog)
Front and rear speakers System: Full range satellite
Impedance: 6Ω
Frequency response: 135 Hz ~ 20 kHz
Dimensions: 4.1 x 8.0 x 2.8 inches (103 x 203 x 71 mm)
Weight: 1.2 lbs. (0.56 kg) each
Center speaker System: Full range satellite
Impedance: 6Ω
Frequency response: 155 Hz ~ 20 kHz
Dimensions: 9.6 x 4.1 x 2.9 inches (244 x 105 x 74 mm)
Weight: 1.9 lbs. (0.84 kg)
Subwoofer Impedance: 6Ω
Speaker drivers: 8 inches (203 mm) woofer
Frequency response: 65 Hz ~ 4 kHz
Dimensions: 6.4 x 14.3 x 14.5 inches (162.5 x 362.5 x 369 mm)
Weight: 2.87 lbs. (1.3 kg)
Video output
RCA jack x 1 1 Vp-p (75Ω)
Component video output
RCA jack x 3 Y: 1 Vp-p (75Ω)P
B/CB: 700 mVp-p (75Ω)PR/CR: 700 mVp-p (75Ω)
Audio input (Digital)
RCA jack x 1
Optical jack x 1
500 mVp-p (75Ω)
Digital connector
HDMI output
HDMI jack x 1 Video: 480p, 720p, 1080i, 1080p/Audio
LAN terminal 10BASE-T / 100BASE-TX
Note
• The specifications and design of this product are subject to change without notice.
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
EN54
ONE (1) YEAR LIMITED WARRANTY
WARRANTY COVERAGE:
This warranty obligation is limited to the terms set forth
below.
WHO IS COVERED:
This product is warranted to the original purchaser or the per-
son receiving the product as a gift against defects in materials
and workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
WHAT IS COVERED:
This warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received within
the Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or
most comparable to the original product in current inventory,
or (3) refund the original purchase price of the product.
The Company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes the company’s property. When a
refund is given, your product becomes the company’s property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all
requirements can result in delay.
WHAT IS NOT COVERED - EXCLUSIONS AND
LIMITATIONS:
This Limited Warranty applies only to the new products that
can be identified by the trademark, trade name, or logo affixed
to it. This Limited Warranty does not apply to any non-Philips
hardware product or any software, even if packaged or sold
with the product. Non-Philips manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
The Company is not liable for any damage to or loss of any
programs, data, or other information stored on any media
contained within the product, or any non-Philips product or
part not covered by this warranty. Recovery or reinstallation
of programs, data or other information is not covered under
this Limited Warranty.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product,
(b) to damage caused by service performed by anyone other
than an Authorized Service Location, (c) to a product or
a part that has been modified without written permission,
or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
This Limited Warranty does not cover:
•Shipping charges to return defective product.
•Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
•Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
•Damage or claims for products not being available for use, or
for lost data or lost software.
•Damage from mishandled shipments or transit accidents when
returning product.
• A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
• A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•Product lost in shipment and no signature verification receipt
can be provided.
•Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS...
Contact Customer Care Center at:
1-866-309-0866
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusions or limitation of incidental
or consequential damages, or allow limitations on how long
an implied warranty lasts, so the above limitations or exclusions
may not apply to you.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
55EN
MEMO
Introduction Connections Basic Setup Playback Radio Tuning OthersFunction Setup
CLASS 1
LASER PRODUCT
HTS5100B
Meet Philips at the Internet
http://www.philips.com/welcome
P&F USA, Inc.
PO Box 430 Daleville, IN 47334-0430
Printed in China
JpnYN-0923/F7-3
CQX1A1442W★
E1P00UD