Philips MCD1065/98 User Manual
Displayed below is the user manual for MCD1065/98 by Philips which is a product in the Home Audio Systems category. This manual has pages.
Related Manuals
www.philips.com/welcome
Register your product and get support at
User manual 1
MCD1065
Ԛʹ˫ 23
MCD1065_98_UM_V1.0.indb 1 2012-1-17 17:26:55
1
English
EN
Contents
1 Important 2
Safety 2
Notice 4
2 Your Micro Music System 5
Feature introduction 5
What's in the box 6
Overview of the main unit 6
Overview of remote control 7
3 Before use 8
Place the unit 8
Connect 8
4 Get started 9
Prepare the remote control 9
Turn on 9
Auto install radio stations 10
Find the correct video input channel 11
Select the correct TV system 11
Select a language for on-screen display 11
5 Play disc/USB 11
Basic operation 11
Play a disc 11
Control the play 12
Picture view options 13
Play slideshow and music simultaneously 14
Adjust sound 14
6 Listen to radio 15
Tune to a radio station 15
Program radio stations automatically 15
Program radio stations manually 15
Select a preset radio station 15
7 Setup 16
General setup 16
Video setup 16
Audio setup 16
Preference setup 17
8 Other features 17
Set the timer 17
Set the sleep timer 18
Play from an external device 18
Headphone 18
9 Product information 19
Supported disc formats 20
USB playability information 20
Maintenance 21
10 Troubleshooting 21
MCD1065_98_UM_V1.0.indb 1 2012-1-17 17:26:55
2EN
1 Important
Safety
Know these safety symbols
This 'bolt of lightning' indicates uninsulated
material within your unit may cause an electrical
shock. For the safety of everyone in your
household, please do not remove product
covering.
The 'exclamation point' calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
shock, this apparatus should not be exposed to
such as vases, should not be placed on this
apparatus.
CAUTION: To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h Do not install near any heat sources such
as radiators, heat registers, stoves, or
produce heat.
i Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
j Only use attachments/accessories
k Use only with the cart, stand, tripod,
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
l Unplug this apparatus during lightning
storms or when unused for long periods
of time.
m
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
MCD1065_98_UM_V1.0.indb 2 2012-1-17 17:26:56
3
English
EN
n Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to
the unit:
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
Batteries (battery pack or batteries
installed) shall not be exposed to
the like.
o Apparatus shall not be exposed to
dripping or splashing.
p Do not place any sources of danger on
q Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
Never remove the casing of this unit.
Never lubricate any part of this unit.
Only use this unit indoors. Keep this unit away from
or heat.
Never look into the laser beam inside the unit.
Caution
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Hearing safety
Listen at a moderate volume.
Using headphones at a high volume can
impair your hearing. This product can
produce sounds in decibel ranges that may
cause hearing loss for a normal person,
even for exposure less than a minute. The
higher decibel ranges are offered for those
that may have already experienced some
hearing loss.
Sound can be deceiving. Over time your
hearing 'comfort level' adapts to higher
volumes of sound. So after prolonged
listening, what sounds 'normal' can actually
be loud and harmful to your hearing. To
guard against this, set your volume to a safe
level before your hearing adapts and leave
it there.
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can
hear it comfortably and clearly, without
distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even
at normally 'safe' levels, can also cause
hearing loss.
and take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for
reasonable periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that
you can't hear what's around you.
You should use caution or temporarily
discontinue use in potentially hazardous
situations. Do not use headphones while
operating a motorized vehicle, cycling,
hazard and is illegal in many areas.
MCD1065_98_UM_V1.0.indb 3 2012-1-17 17:26:56
4EN
Notice
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
This product complies with the radio
Community.
Your product is designed and manufactured
which can be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product it means that the product
Please inform yourself about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste. Correct disposal of
your old product helps to prevent potential
human health.
Your product contains batteries covered by
cannot be disposed with normal household
waste.Please inform yourself about the local
rules on separate collection of batteries
because correct disposal helps to prevent
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and old
Copyright notice
This item incorporates copy protection
technology that is protected by U.S. patents
and other intellectual property rights of
Rovi Corporation. Reverse engineering and
disassembly are prohibited.
Trademark notice
Manufactured under license from Dolby
Laboratories.
"Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
Windows Media and the Windows logo
are trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
MCD1065_98_UM_V1.0.indb 4 2012-1-17 17:26:57
5
English
EN
'DVD Video' is a trademark of DVD Format/
Logo Licensing Corporation.
DivX , DivX Ultra and
associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used
under license.
DivX Ultra video
with advanced features and premium content.
is a digital video
format created by DivX, LLC, a subsidiary
device that plays DivX video. Visit
divx.com for more information and software
device must be registered
in order to play purchased DivX Video-on-
Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section
in your device setup menu. Go to vod.divx.com
for more information on how to complete your
registration.
This apparatus includes this label:
Note
The type plate is located at the rear of the apparatus.
2 Your Micro
Music System
Congratulations on your purchase, and
support that Philips offers, register your product
at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
rear of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Feature introduction
This unit can play videos, audios, and display
pictures from discs and USB storage devices.
For the details of supported media, refer to
MCD1065_98_UM_V1.0.indb 5 2012-1-17 17:26:59
6EN
What's in the box
Check and identify the contents of your
package:
Main unit
2 x Speakers
Power cord
Remote control with 2 AAA batteries
1 x Video cable
User manual
Quick start guide
Overview of the main unit
a Display panel
Show current status.
b
Turn on the unit, or switch to standby
c Remote sensor
d
Connector for a USB device.
e MP3 LINK
Connector (3.5mm) for an external
audio device.
f
Stop play or erase a program.
a
b
c
d
e
f
g
h
i
j
k
l
g /
Skip to the previous/next track.
Search within a track.
Tune to a radio station.
h
Start or pause play.
i VOL +/-
Adjust volume.
Adjust time.
j DBB
Turn the dynamic bass enhancement
on or off.
Select a preset sound effect.
k SOURCE
Select a source: Disc, USB, tuner, or
MP3 link.
l
Open or close the disc compartment.
MCD1065_98_UM_V1.0.indb 6 2012-1-17 17:27:01
7
English
EN
Overview of remote control
a
Switch the micro system on/off.
standby.
b DISC/DISC MENU/FM/USB/MP3 LINK
Select the source.
Access the main menu of the system.
c
Access the home menu.
d INFO
Show the disk information such as title,
chapter, subtitle, time elapsed, total
time etc.
e AUDIO / SUBTITLE
For menus: navigate up/down.
Invert a picture.
AUDIO: Toggle between stereo and
mono.
a
b
d
e
f
g
h
j
i
k
m
l
c
r
q
n
p
o
SUBTITLE: Select a subtitle language
for a video.
Select a programmed radio station.
f OK
g /
Search in a track or disc.
Fast backward or forward.
For menus, navigate left/right.
Rotate a picture.
Select a preset radio station.
h
Return to a previous display menu.
i
Start, pause or resume play.
j /
Skip to the previous/next track, title,
Select a programmed radio station.
k VOL +/-
Adjust the volume.
l Numeric buttons
Select a title/chapter/track to play.
m PROG/CLOCK SET
Program radio stations.
Set clock.
n TIMER/SLEEP
Set sleep timer.
Set alarm timer.
o
Mute.
p
Stop play.
Activate/deactivate the demonstration
mode.
q DSC/DBB
Select a preset sound setting.
Turn on or off dynamic bass enhancement.
r MODE/OPTIONS
Select repeat play or random play.
Accesses options relating to the
current activity or selection.
MCD1065_98_UM_V1.0.indb 7 2012-1-17 17:27:04
8EN
3 Before use
Place the unit
Note
Risk of overheating! Never install this apparatus in a
other objects never cover the ventilation slots on this
apparatus.
Never place this unit in an enclosed cabinet, nor on any
Do not insert any object other than indicated into
ventilation openings nor other openings.
Install this unit near the AC outlet where the AC power
plug can be easily reached.
To avoid magnetic interference or unwanted noise,
never place the main unit and speakers too close to
any radiation devices.
1 Place the unit near to the TV.
2 Place the speakers at a suitable
distance from the TV and at an angle
of approximately 45 degrees from the
listening position.
Connect
Connect speakers
Note
For optimal sound, use the supplied speakers only.
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
Connect TV
Connect through composite video
Connect the supplied composite video cable to:
the VIDEO OUT socket on this unit.
the video input socket on the TV.
R +
–
–
L +
MCD1065_98_UM_V1.0.indb 8 2012-1-17 17:27:05
9
English
EN
Connect audio from TV or other
devices
Connect audio through a digital coaxial cable
Connect a coaxial cable to:
COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on
the TV or other device.
Connect power
Caution
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the rear of the main unit.
Before connecting the AC cord, make sure that you
have completed all other connections.
Note
The type plate is located on the rear of the main unit.
1 Connect the power cord to the AC~ jack
on the main unit.
2 Connect the power plug to the wall outlet.
4 Get started
Prepare the remote control
Caution
Risk of explosion! Keep batteries away from heat,
To insert the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
If you are not going to use the remote control for a
long time, remove the batteries.
Do not use old and new or different types of batteries
in combination.
Batteries contain chemical substances, so they should
be disposed of properly.
Turn on
Press .
» The unit switches to the last selected
source.
MCD1065_98_UM_V1.0.indb 9 2012-1-17 17:27:07
10 EN
Switch to standby
When the unit is turned on, press to switch
the unit to standby.
In standby, press and hold over
three seconds to switch from normal
versa.
» In normal standby, the clock (if set)
appears on the display panel.
»
the display panel turns off.
Note
If no source is played within 15 minutes, the unit
switches to standby mode.
If no operation is performed within 15 minutes in
mode.
Press to switch the unit to the last source when it
was turned off.
Demonstrate features
In the standby mode, press .
» [WELCOME TO PHILIPS] (welcome
to Philips) scrolls on the display.
» [DEMO ON] (demo on) scrolls on
the display.
» The feature names are displayed one
by one.
To exit the feature demonstration,
press again.
» [DEMO OFF] (demo off) scrolls on
the display.
Set clock
Note
You can set the clock in standby mode only.
1 Press to switch the unit to standby.
2 Make sure that --:-- (or clock) is displayed.
3 Press and hold PROG/CLOCK SET to
activate the clock setting mode.
» [CLOCK SET] (clock set) is displayed.
» The 12 hour or 24 hour format is
displayed.
4 Press / or VOL -/+ to select 12 hour
or 24 hour format.
5 Press PROG/CLOCK SET.
» The hour digits begin to blink.
6 Press / or VOL -/+ to set the hour.
7 Press PROG/CLOCK SET.
» The minute digits begin to blink.
8 Press / or VOL -/+ to set the minute.
9 Press PROG/CLOCK SET
Note
To exit clock setting mode without storing, press .
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1 Connect the unit to the power supply.
» [AUTO INSTALL - PRESS PLAY-
STOP CANCEL] (press to start
automatic installation, or press to
cancel) is displayed.
2 Press on the main unit to start
installation.
» The unit automatically stores radio
MCD1065_98_UM_V1.0.indb 10 2012-1-17 17:27:08
11
English
EN
» When all the available radio stations
is broadcast automatically.
Find the correct video input
channel
1 Turn on your unit.
2 Press DISC to select the disc source.
Turn on the TV and switch to the
correct video-in channel.
Note
See the user manual of your TV for how to switch
between video-in channels.
Select the correct TV system
This unit is compatible with both NTSC and
PAL. If the picture is abnormally displayed with
the default setting, select a TV system that
matches your TV. (Refer to "Setup" > "Video
Setup" > [TV System] for details)
Select a language for on-
screen display
setting. (See "Setup" > "General Setup" > [OSD
Language] for details)
5 Play disc/USB
Caution
Risk of damage to the unit! During play, never move
the unit.
Never put any object other than a disc into the disc
compartment.
Never look at the laser beam inside the unit.
Never play discs with accessories such as disc stabilizer
rings or disc treatment sheets.
Basic operation
The listed operations are applicable for all
supported media.
Function Action
Stop play Press .
Pause or resume play Press .
Skip to the previous/next title,
Press / .
Play a disc
1 Press DISC to select the disc source.
2 Press on the main unit to eject the disc
tray.
3 Place a disc onto the disc tray with the
printed side upward, and then press .
4 The unit starts playing automatically.
To start the play manually, press .
To play a DVD that has a rating level
higher than your setting, enter the
MCD1065_98_UM_V1.0.indb 11 2012-1-17 17:27:08
12 EN
Select a subtitle language
You can select a subtitle language for a DVD or
DivX (Ultra) video.
During play, press SUBTITLE repeatedly.
Note
For some DVDs, the language can only be changed
from the disc menu. Press DISC MENU to access the
menu.
!
are copied onto a CD-R/RW, recordable DVD,
or USB storage device.
Note
You can only play DivX videos that are rented or
purchased with DivX® registration code of this unit.
(See "Setup" > "General setup" > "#$%&#
Code])
.sub, .ssa, .ass) are supported but not displayed in the
excluded).
under the same directory.
Connect a USB storage devidce
1 Press USB to select the source for USB
storage device.
2 Insert the USB storage device.
» The unit starts playing automatically.
» The user interface is displayed.
On the left: the information source.
time elapsed, total time for the audio/video.
Access a folder
1 Press / to highlight the selected folder
name.
2 Highlight [Previous] and press OK back to
the last-level menu.
!
1 Access the selected folder.
2 Press /
name.
3 Press OK
»
» The unit stops playing automatically
category.
Control the play
Display play information
During play, press INFO to display play
information on the TV.
MP3
WMA
Picture
Title:
Artist:
Album:
00:13/ 01:19
000001
000002
000001
000022
MCD1065_98_UM_V1.0.indb 12 2012-1-17 17:27:08
13
English
EN
Search forward/backward
During video/audio play, press /
repeatedly to select a search speed.
To resume play at normal speed, press
.
PBC menu
1 During video playback, press OPTIONS to
access PBC menu.
2 Use / to highlight desired option.
[PBC]
[Aspect ratio]
[Zoom]
[Angle]
[Repeat]
[Goto]
[Slow Forward]
[Slow Backward]
3 Press to access sub options, and use /
too select the right sub option.
4 Press OK
PBC
Aspect ratio
Zoom
Slow Forward
Goto
Slow Backward
Repeat
Angle
Slow forward/backward play
1 During video play, press OPTIONS to
access PBC menu.
2 Use / to highlight the slow forward/
backward option.
3 Press , and use / to select the right
ratio.
4 Press OK
Search by time or title/chapter/track
number
1 During play, press OPTIONS to access
PBC menu.
2 Use / to highlight [Goto].
3 Press to access menu.
4 Use / to highlight the title number,
chapter number, track number, or time
5 Press OK
» the selected segment is displayed.
» Play starts automatically.
Picture view options
Image playback control
1 Press OPTIONS to access image options.
MCD1065_98_UM_V1.0.indb 13 2012-1-17 17:27:10
14 EN
2 Use / to highlight the desired option.
[Color]
[Zoom]
[Photo Preview]
3 Press , and use / to select the sub
options.
4 Press OK
Rotate a picture
During play, press / to rotate the picture
counterclockwise/clockwise.
Play slideshow and music
simultaneously
Note
Make sure that the USB storage device or the disc
1
2 Access a photo folder.
3
4 Press OK to start the slideshow.
The slideshow stops after all photos
are displayed for one time.
To stop the slideshow, press .
Color
Zoom
Photo Preview
Note
This function is only available when you select the
folder as the play source.
This unit can only display digital camera pictures with
pictures cannot be displayed either.
picture.
Adjust sound
During play, you can adjust volume through
following operations.
Key Function
VOL +/- To increase/decrease the
volume.
To mute/restore sound.
DBB/DSC To select your desired
sound effect:
[POP] (pop)
[JAZZ] (jazz)
[ROCK] (rock)
[CLASSIC] (classic)
[DBB] (DBB)
[FLAT]
MCD1065_98_UM_V1.0.indb 14 2012-1-17 17:27:10
15
English
EN
6 Listen to radio
Tune to a radio station
1 Press FM.
2 Press and hold / on the unit over
two seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station, press /
reception.
OK on
remote control repeatedly to select
stereo or mono sound.
Tip
Position the antenna as far as possible from TV, VCR, or
other radiation source.
For optimal reception, fully extend and adjust the
position of the antenna.
Program radio stations
automatically
You can program a maximum of 20 preset
radio stations (FM).
In FM mode, press and hold PROG/CLOCK
SET over two seconds to activate automatic
program mode.
» [AUTO] (auto) is displayed.
» All available stations are programmed.
»
broadcast automatically.
Program radio stations
manually
Note
You can program a maximum of 20 preset radio
stations.
1 Tune to a radio station.
2 Press PROG/CLOCK SET to activate
program mode.
» [PROG] (program) begins to blink.
3 Press / to allocate a number (1 to 20)
to this radio station, and then press PROG/
CLOCK SET
4 Repeat the previous steps to program
other stations.
Note
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In FM mode, press / to select a preset
number.
MCD1065_98_UM_V1.0.indb 15 2012-1-17 17:27:11
16 EN
7 Setup
1 After you press the button .
» The home menu appears.
2 Select to access the system menu.
Note
You cannot change a menu option that is grayed out.
To return to the previous menu, press . To exit the
menu, press again.
General setup
1 Press button.
2 Select to access the setup menu.
3 Select
[Disc Lock]: Turn Disc lock.
[OSD Language]: Select an on-screen
display menu language.
USB
Disc
Disc
Setup
General
Disc Lock
OSD Language English
Off
Registration
Sleep Timer
DivX(R) VOD Code
Video
Audio
Preference
[Sleep Timer]:Sets a sleep timer to switch
the home theater to standby after a
"#$%&#(): Get registration
code of DivX Video On Demand
Registration.
Note
If you select a language which is not available on a disc,
this unit uses the default language of the disc.
Video setup
1 Press button.
2 Select to access the setup menu.
3 Select to access the [Video] options.
[TV System]: Selects a TV system that
is compatible with the TV.
[Aspect ratio]: Set screen display
format(Pan Scan, Letter Box, or Wide
Screen).
[Picture Setting]
color setting or set the color manually.
Audio setup
1 Press button.
2 Select to access the setup menu.
3 Select to access the [Audio] options.
[Analogue Output]:Selects the analog
audio setting based on the audio
device that is connected through the
analog audio jacks.
[Digital Audio]:Select audio formats
supported by the connected device.
[Sound Mode]: Selects a preset sound
effect to enhance the audio output.
MCD1065_98_UM_V1.0.indb 16 2012-1-17 17:27:13
17
English
EN
[Night Mode]
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Preference setup
1 Press button.
2 Select to access the setup menu.
3 Select to access the [Preference]
options.
[Audio]: Select an audio language for video.
[Subtitle]: Select a subtitle language for
video.
[Disc Menu]: Select a menu language for a
video disc.
[Parental Control]: Set the rating level
to a disc. Restrict access to discs that are
encoded with ratings These discs must be
recorded with rating levels.
[PBC]:Display or skip the content menu
for VCD and SVCD.
[Password]: Set or change a password to
play a restricted disc.
[DivX Subtitle]:Select the language of the
DivX.
[Version Info]:Display the software version.
[Default]:Reset the home theater to the
default settings programmed at the factory.
Note
the movie is ‘Movie.avi’, then you need to name the text
8 Other features
Set the timer
This unit can be used as a timer. The disc/tuner/
USB is activated to play at a preset time.
Note
Make sure that you have set the clock correctly.
1 In standby mode, press and hold TIMER/
SLEEP until [TIMER SET] (timer set) scrolls
on the display.
» "*;<;(=*&>(;)
scrolls on the display.
2 Press DISC, or USB, or TUNER to select
a source.
3 Press TIMER/SLEEP
» The clock digits are displayed and
begin to blink.
4 Press / or VOL -/+ to set hour, then
press TIMER/SLEEP
» The minute digits are displayed and
begin to blink.
5 Press / or VOL -/+ to set minute,
then press TIMER/SLEEP
» [VOL] (volume) is displayed and begins
to blink.
6 Press / or VOL -/+ to adjust volume,
then press TIMER/SLEEP
» The timer is set and activated, and is
displayed.
Tip
Minimum volume and maximum volume can be set,
volume 1 to volume 31 can be adjusted.
MCD1065_98_UM_V1.0.indb 17 2012-1-17 17:27:14
18 EN
To deactivate or re-activate an alarm timer
1 Press to switch to standby mode.
2 Press TIMER/SLEEP repeatedly to activate
or deactivate timer.
» If timer is activated, is displayed.
» If timer is deactivated, disappears.
Note
In MP3 link mode, the timer cannot be set.
If disc/USB source is selected and the audio cannot be
played, tuner is activated automatically.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
When the unit is turned on, press TIMER/
SLEEP repeatedly to select a set period of time
(in minutes):
[60 SLEEP]
[45 SLEEP]
[30 SLEEP]
[15 SLEEP]
» When sleep timer is activated, is
displayed.
To deactivate sleep timer
Press TIMER/SLEEP repeatedly until [OFF
SLEEP] (off sleep) is displayed.
» When sleep timer is deactivated,
disappears.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press MP3 LINK to select the MP3 link
source.
2 Connect MP3 link cable to:
the MP3 LINK connector (3.5mm) on
the unit.
the headphone connector on an
external device.
3 Start to play the device (see user manual
of the device).
Headphone
Plug headphones (not supplied) into the
connector on the unit to listen through the
headphones.
MCD1065_98_UM_V1.0.indb 18 2012-1-17 17:27:15
19
English
EN
9 Product
information
Note
Product information is subject to change without prior
notice.
*
Region Code
You can play DVD discs marked with the
following region code.
DVD region code Countries
Southeast Asia, South
Korea, Taiwan, Hong Kong,
Macau
General information
AC power AC 110-240 V~,
50/60 Hz
Operation Power
Consumption
20 W
Consumption
<0.5 W
USB Direct Version 2.0/1.1
Composite Video
Output
1.0 Vp-p, 75 ohm
Coaxial Output 0.5 Vpp±0.1Vpp, 75
ohm
Dimensions
- Main Unit (W x H
x D)
140 x 143 x
210 mm
- Speaker box (W x
H x D)
140 x 143 x
198 mm
Weight
- Main Unit 0.86 kg
- Speaker box 0.72 kg x 2
?
Max Output Power 2 x 12W (-1dB)
40 Hz - 20 kHz, ±3
dB
Signal to Noise Ratio >72 dBA
MP3 link input 500-1000 mV, RMS
20 kohm
Disc
Laser Type Semiconductor
Disc Diameter 12 cm/8 cm
Video Decoding
DivX
Video DAC 12 Bits
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N > 57 dB
Audio DAC 24 Bits / 96 kHz
Total Harmonic
Distortion
< 1% (1 kHz)
Response
4 Hz - 20 kHz (44.1 kHz)
4 Hz - 22 kHz (48 kHz)
4 Hz - 24 kHz (96 kHz)
S/N Ratio > 82 dBA
Tuner
Tuning Range FM: 87.5 - 108
MHz
Tuning grid 50 KHz
FM sensitivity
- Mono
26 dB
Total Harmonic Distortion <2%
Signal to Noise Ratio >55 dB
Number of presets 20 (FM)
MCD1065_98_UM_V1.0.indb 19 2012-1-17 17:27:16
20 EN
Speakers
Speaker Impedance 4 ohm
Speaker Driver 2 X 3" full range
Sensitivity >82 dB/m/W
Supported disc formats
Supported video media:
DivX Ultra
Digital Video Discs (DVDs)
Picture CD
Video CDs (VCDs)
Super Video CDs (SVCDs)
DVD-R/-RW
MP3-CD
CD-R/CD-RW
DVD+R/+RW
Compact Discs (CDs)
Supported compression formats:
Ultra+addendum 1.0), XivD, AVI(MPG)
Supported audio media:
CD
CD-R/RW
MP3-CD
WMA-CD
Supported following audio formats:
Dolby Digital Plus/5.1
PCM Audio
MP3, MP3 ID3 Tag
WMA, WMA Tags
Unsupported formats:
Files like *.VMA,, *.DLF, *.M3U
*.PLS, *.WAV
Discs recorded in Joliet format
MP3 Pro
USB playability information
Compatible USB storage devices:
USB1.1)
card reader to work with this system)
Supported formats:
FAT16, FAT32 (sector size: 512 bytes)
MP3 bitrate (data rate): 32-320 Kbps
and variable bitrate
Directory nesting up to a maximum of
8 levels
Number of albums/ folders: maximum
99
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
and is not shown in the display.
For example, Word documents (.doc)
ignored and not played.
*.m4a, *.m4p, *.mp4, *.aac)
MCD1065_98_UM_V1.0.indb 20 2012-1-17 17:27:16
21
English
EN
Maintenance
Clean the cabinet
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
10 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
@
is connected properly.
@
@To save power, the unit switches to
standby automatically 15 minutes after
a play reaches the end and no control is
operated.
No disc detected
@Insert a disc.
@Check if the disc is inserted upside down.
@Wait until the moisture condensation at
the lens has cleared.
@Replace or clean the disc.
@
No picture
@Check the video connection.
@Turn on the TV to the correct Video-In
channel.
Black and white or distorted picture
@The disc does not match the TV color
system standard (PAL/NTSC).
@Sometimes a slight picture distortion may
appear. This is not a malfunction.
@Clean the disc.
MCD1065_98_UM_V1.0.indb 21 2012-1-17 17:27:16
22 EN
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
@
DVD disc.
@The aspect ratio may not be changed for
some TV systems.
No sound
@Adjust the volume.
No response from the unit
@Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
@
select the correct source with the remote
control instead of the main unit.
@Reduce the distance between the remote
control and the unit.
@Insert the battery with its polarities (+/–
signs) aligned as indicated.
@Replace the batteries.
@Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
@Insert a disc.
@Check if the disc is inserted with the print
side facing inward.
@Wait until the moisture condensation at
the lens has cleared.
@Replace or clean the disc.
@
#$
@
complete.
@
@Due to Digital Rights issue, the DRM-
through an analog video connection (e.g.
composite, component and scart). Transfer
the video content onto the Disc Media
Audio or subtitle languages cannot be set
@The disc is not recorded with sound or
subtitles in multiple languages.
@The audio or subtitle language setting is
prohibited on the disc.
(>*Q
@
device has exceeded a certain limit. This
phenomenon is not a malfunction.
@
supported.
USB device not supported
@The USB device is incompatible with the
unit. Try another one.
Poor radio reception
@Increase the distance between the unit and
your TV or VCR.
@Fully extend and adjust the FM antenna.
Timer does not work
@Set the clock correctly.
@Switch on the timer.
Clock/timer setting erased
@Power has been interrupted or the power
cord has been disconnected.
@Reset the clock/timer.
MCD1065_98_UM_V1.0.indb 22 2012-1-17 17:27:16
Specifications are subject to change without notice
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
MCD1065_98_UM_V1.2
MCD1065_98_UM_V1.0.indb 46 2012-1-17 17:27:39