Philips S5589/30 User Manual

Displayed below is the user manual for S5589/30 by Philips which is a product in the Men's Shavers category. This manual has pages.

Related Manuals

Eaton 91PS-30(30)-30-3x9Ah-LL-6 Manual

Eaton 91PS-30(30)-30-4x9Ah-LL-6 Manual

Eaton 91PS-30(30)-30-3x9Ah-MBS-6 Manual

Eaton 91PS-30(30)-30-3x9Ah-LL-MBS-6 Manual

Eaton 91PS-30(30)-30-3x9Ah-6 Manual

Eaton 91PS-30(30)-30-4x9Ah-6 Manual

Eaton 91PS-30(30)-30-4x9Ah-MBS-6 Manual

Eaton 91PS-30(30)-30-0-6 Manual

www.philips.com/support/ifu

S5000 series

8 9

11 12

13 14 15

17 18 19 20 21

English

Contents

Introduction_______________________________________________________ 6

General description_______________________________________________ 7

What do the icons on my appliance handle mean?_____________ 8

What does the icon on my Quick Clean Pod mean?_____________ 9

How do I charge my appliance?__________________________________ 9

Charging with the supply unit____________________________________ 10

Charging in the charging stand (specific models only)__________ 10

'Unplug for use' symbol __________________________________________ 11

How do I use my appliance and the attachments?______________ 11

Shaving____________________________________________________________ 12

How do I clean my appliance and the attachments?____________ 18

Cleaning the shaver under the tap_______________________________ 18

Thorough cleaning________________________________________________ 19

Cleaning the pop-up trimmer____________________________________ 20

Cleaning the click-on attachments_______________________________ 21

How do I use the Quick Clean Pod?______________________________ 22

Preparing the Quick Clean Pod for use__________________________ 22

Using the Quick Clean Pod_______________________________________ 23

Replacing the Quick Clean Pod Cartridge_______________________ 24

How do I replace the shaving heads?____________________________ 25

Replacing the shaving heads_____________________________________ 25

Support___________________________________________________________ 27

Ordering accessories_____________________________________________ 27

Troubleshooting__________________________________________________ 28

Shaver_____________________________________________________________ 28

Philips Quick Clean Pod__________________________________________ 29

Introduction

Congratulations on your purchase and welcome to

Philips! To fully benefit from the support that

Philips offers, register your product at

www.philips.com/welcome or via the app.

6English

General description

1 Pop-up trimmer

2 Trimmer release slide

3 Shaving unit

4 Shaving unit release button

5 On/off button

6 Handle

7 Socket for small plug

8 Charging stand

9 Supply unit

10 Small plug

11 Protection cap

12 Pouch

13 Philips Quick Clean Pod cartridge

14 Quick Clean Pod

15 Cleaning brush

16 Length settings

17 Click-on beard styler attachment

18 Comb for beard styler attachment

19 Attachment holder

20 Click-on cleansing brush attachment

21 Click-on nose trimmer attachment

Note: The accessories supplied may vary for

different products. The box shows the accessories

that have been supplied with your appliance.

English

What do the icons on my appliance handle

mean?

Icon Behavior Meaning

Flashing

slowly when

you remove

the shaver

from the

Quick Clean

Pod during

the cleaning

programa

The cleaning program was interrupted. If

you put the shaver back into the Quick

Clean Pod within four seconds, the

cleaning program resumes automatically.

Flashing Clean the shaver in the Quick Clean Pod

(see 'How do I use the Quick Clean

Pod?'). Clean the attachments under the

tap (see 'How do I clean my appliance

and the attachments?').

Lights up

continuously The cleaning program is in progress.

Flashing

quickly when

you remove

the shaver

from the

Quick Clean

Pod or press

the on/off

button

during the

cleaning

program

The cleaning program was stopped. If

you wish to continue, you need to restart

the cleaning cycle by putting the shaver

into the Quick Clean Pod and pressing

the on/off button.

Flashing

when you

press the

on/off

button

The travel lock is activated (see 'Storage

and travel').

8English

Icon Behavior Meaning

Lights up

when you

pick up the

appliance

The number of bars lit up show the

remaining battery charge.

Bottom light

flashing

orange

The battery is almost empty (see 'How do

I charge my appliance?').

Lights

flashing in

sequence

The appliance is charging.

Lights up

continuously The appliance is fully charged.

Flashing The appliance must be disconnected

from the wall socket before you can

switch it on (see 'How do I charge my

appliance?').

What does the icon on my Quick Clean Pod

mean?

Icon Behavior Meaning

Becomes visible on the

Quick Clean Pod The Quick Clean Pod Cartridge

needs to be replaced (see

'How do I use the Quick Clean

Pod?').

How do I charge my appliance?

Charge the appliance before you use it for the first

time and when the bottom light of the battery

status indicator flashes orange, indicating that the

battery is almost empty.

Charging takes approx. 1 hour.

English

Quick Charge: After approx. 5 minutes of charging,

the battery contains enough energy for one shave.

When the appliance is fully charged it has a

cordless operating time of up to 60 minutes.

Note: You cannot use the appliance while it is

charging.

Charging with the supply unit

1Make sure that the appliance is switched off.

2Insert the small plug into the appliance and put

the supply unit in the wall socket.

-While the appliance is in quick charge mode,

the lights of the battery status indicator light

up one after the other. After approximately 5

minutes, the bottom light of the battery

status indicator flashes. The battery now

contains enough energy for one shave.

-While the appliance charges, first the bottom

light of the battery status indicator flashes

and then lights up continuously. Next the

second light flashes and then lights up

continuously, and so on until the appliance

is fully charged.

-When the appliance is fully charged, all three

battery indicator lights light up continuously.

After approx. 30 minutes, the light goes out

automatically.

3After charging, remove the supply unit from the

wall socket and pull the small plug out of the

appliance.

Charging in the charging stand (specific models only)

1Make sure the appliance is switched off.

10 English

2Put the small plug in the charging stand and put

the supply unit in the wall socket.

3Place the appliance in the charging stand.

Specific models only: The light ring on the

bottom of the charging stand lights up and

rotates quickly.

-After approximately 5 minutes, the light ring

rotates slower. The battery now contains

enough energy for one shave.

-As the appliance continues to charge, the

light ring becomes brighter and rotates

slower.

-When the appliance is fully charged, the light

ring lights up fully and stops rotating.

4After charging, remove the supply unit from the

wall socket and pull the small plug out of the

charging stand.

'Unplug for use' symbol

The 'unplug for use' symbol flashes to remind you

to disconnect the appliance from the wall socket

and remove the small plug from the appliance

before you switch it on.

How do I use my appliance and the

attachments?

Warning: Always check the appliance and

all accessories before use. Do not use the

appliance or any accessory if it is damaged,

as this may cause injury. Always replace a

damaged part with one of the original type.

Note: This appliance is waterproof. It is suitable for

use in the bath or shower and for cleaning under

English

the tap. For safety reasons, the appliance can

therefore only be used without cord.

Shaving

You can use this appliance either wet or dry, or

even under the shower. For a wet shave, apply

some water and shaving foam or gel to your skin

and rinse the shaving heads under the tap with

warm water before following the steps below.

1Switch on the appliance.

2Move the shaving heads over your skin in

circular movements to catch all hairs growing in

different directions. Make sure each shaving

head is fully in contact with the skin. Exert

gentle pressure for a close, comfortable shave.

Note: Do not press too hard, as this can cause

skin irritation.

Note: If you are shaving with gel or foam, rinse

the shaving unit regularly during your shave to

ensure that it continues to glide smoothly over

your skin.

3Use the narrow sides of the shaving unit to

shave in hard-to-reach areas such as along

your jawline and under your nose.

4Switch off and clean the appliance after each

use.

12 English

Note: Make sure you rinse all foam or shaving

gel off the appliance.

Skin adaptation period

Your first shaves may not bring you the result you

expect and your skin may even become slightly

irritated. This is normal. Your skin and beard need

time to adapt to any new shaving system. To allow

your skin to adapt to this new appliance, we advise

you to shave regularly (at least 3 times a week) and

exclusively with this appliance for a period of 3

weeks.

Cleaning reminder

When you switch off the appliance, the cleaning

reminder flashes to remind you to clean the

appliance.

- Clean the appliance and attachments after

each use to prevent clogging and damage (see

'How do I clean my appliance and the

attachments?').

- Clean the shaving heads thoroughly once a

month or when the appliance does not shave

as well as it used to (see 'Thorough cleaning').

Trimming

You can use the trimmer to groom your sideburns

and moustache.

1Push the trimmer release slide downwards to

open the trimmer.

2Switch on the appliance.

English

3Hold the trimmer perpendicular to the skin and

move the appliance downwards while you exert

gentle pressure.

4You can also use the trimmer under your nose.

5Switch off the appliance and clean the trimmer

after each use to prevent clogging and damage

(see 'How do I clean my appliance and the

attachments?').

6Close the trimmer.

Using the click-on attachments

Note: The accessories supplied may vary for

different products. The box shows the accessories

that have been supplied with your product.

Using the beard styler attachment with comb

You can use the beard styler attachment with the

comb attached to style your beard at one fixed

setting or at different length settings. You can also

use it to pre-trim any long hairs before shaving for

a more comfortable shave.

The hair length settings on the beard styler

attachment correspond to the remaining hair

length after cutting and range from 1 to 5mm.

1Twist the shaving head or other attachment to

remove it from the handle and press the beard

styler attachment onto the handle.

14 English

2Slide the comb straight into the guiding grooves

on both sides of the beard styler attachment.

3Press the length selector and then push it to

the left or right to select the desired hair length

setting.

4Switch on the appliance.

5Move the appliance upwards while you exert

gentle pressure. Make sure the front of the

comb is in full contact with the skin.

6Switch off the appliance and clean the

attachment after use.

Using the beard styler attachment without comb

You can use the beard styler attachment without

the comb to contour your beard, moustache,

sideburns or neckline to a length of 0.5mm.

You can use the beard styler attachment with the

comb attached to style your beard at one fixed

setting or at different length settings. You can also

use it to pre-trim any long hairs before shaving for

a more comfortable shave.

1Pull the comb off the beard styler attachment.

Note: Grab the comb in the center to pull it off

the beard styler attachment. Do not pull at the

sides of the comb.

2Switch on the appliance.

English

3Hold the beard styler attachment perpendicular

to the skin and move the appliance downwards

while you exert gentle pressure.

4Switch off the appliance and clean the

attachment after use.

Using the nose/ear trimmer attachment

You can use the nose/ear trimmer attachment to

trim your nose and/or ear hair.

Trimming nose hair

Make sure both the nose/ear trimmer attachment

and nasal passages are clean before trimming.

1Twist the shaving head or other attachment to

remove it from the handle and press the

nose/ear hair trimmer onto the handle.

2Switch on the appliance.

3Carefully insert the trimming head into one of

your nostrils.

Do not insert the attachment more than 0.5cm

into your nostrils.

4Slowly move the trimming head around inside

each nostril, making sure the side of the tip is

held firmly against the skin. This reduces the

tickling effect that can occur.

5Switch off the appliance and clean the

attachment after use.

Dried nasal mucus can block the cutting element,

preventing the appliance from switching on. If the

cutting element is blocked, clean the attachment

(see 'How do I clean my appliance and the

attachments?').

Trimming ear hair

Make sure your outer ear channels are clean and

free from wax.

1Switch on the appliance.

16 English

2Slowly move the trimming head along the rim of

the ear to remove hairs that stick out beyond

the rim.

3Carefully insert the trimming head into the

outer ear channel.

Do not insert the trimming head more than

0.5cm into your ear channel, as this could

damage the eardrum.

4Slowly turn the trimming head around to

remove all unwanted hairs from your outer ear

channel.

5Switch off the appliance and clean the

attachment after use.

Storage and travel

Note: We advise you to let the appliance and its

attachments dry before you store them for the

next use.

- Put the protection cap (if supplied) on the

shaver to protect it from dirt accumulation.

- Store the appliance in the pouch (if supplied).

- Alternatively, store the appliance on the

charging stand (if supplied) or in the Philips

Quick Clean Pod (if supplied).

Travel lock

You can lock the shaver when you are going to

travel to prevent it from switching on accidentally.

3 sec.

Press the on/off button for 3 seconds to use the

travel lock mode.

When the travel lock is activated, the travel lock

symbol flashes.

Press the on/off button for 3 seconds.

English

Once the travel lock is deactivated, the appliance

switches on automatically.

Note: The shaver unlocks automatically when it is

connected to a wall socket.

How do I clean my appliance and the

attachments?

Clean the appliance and the attachments after

each use for optimal performance.

Cleaning the shaver under the tap

Clean the shaver after each use to prevent

clogging and damage.

Never dry the shaving unit with a towel or tissue,

as this may damage the shaving heads.

While rinsing the shaving unit, water may drip out

of the base of the shaver. This is a normal

occurrence.

1Switch on the shaver.

2Rinse the shaving unit under a warm tap.

3Switch off the shaver. Press the release button

to open the shaving unit.

18 English

4Rinse the hair chamber under a warm tap.

5Rinse the shaving head holder under a warm

tap.

6Carefully shake off excess water and let the

shaving head holder air-dry completely.

7Close the shaving unit.

Thorough cleaning

We advise you to clean the shaving heads

thoroughly once a month or when the shaver does

not shave as well as it used to.

1Make sure that the appliance is switched off

and disconnected from the wall socket.

2Press the release buttons on the shaving unit

and pull the shaving head holder off the

shaving unit.

English

3Rinse the hair chamber and shaving head

holder under the tap.

4Remove the shaving heads. For detailed

instructions, see 'How do I replace the shaving

heads?.'

Note: Do not clean more than one cutter and

guard at a time, since they are all matching sets.

If you accidentally put a cutter in the wrong

shaving guard, it may take several weeks before

optimal shaving performance is restored.

5Clean the cutter and guard under the tap.

6Shake off excess water.

7Put the shaving heads back into the shaving

unit. For detailed instructions, see 'How do I

replace the shaving heads?.'

8Insert the hinge of the shaving head holder into

the slot in the top of the shaving unit and close

the shaving unit.

Cleaning the pop-up trimmer

Clean the trimmer after each use to prevent

clogging and damage.

Never dry the trimmer teeth with a towel or

tissue, as this may damage the trimmer teeth.

1Make sure that the appliance is switched off

and disconnected from the wall socket.

2Push the trimmer release slide down to open

the pop-up trimmer.

20 English

3Switch on the appliance and rinse the pop-up

trimmer with warm water.

4After cleaning, switch off the appliance.

5Carefully shake off excess water and let the

pop-up trimmer air dry.

6Close the trimmer.

Tip: For optimal performance, lubricate the teeth

of the pop-up trimmer with a drop of mineral oil

every six months (oil not included).

Cleaning the click-on attachments

Never dry the trimmer or beard styler attachments

with a towel or tissue, as this may damage the

trimming teeth.

The accessories supplied may vary for different

products. The box shows the accessories that have

been supplied with your product.

Clean the click-on attachments after each use for

optimal performance.

1Make sure that the appliance is switched off.

2Twist the attachment to remove it from the

handle.

Pull the cleansing brush head straight off of the

attachment holder.

3Clean the parts thoroughly with warm water.

Use soap only on the cleansing brush

attachment.

Tip: If rinsing the nose/ear trimmer attachment

under the tap is not sufficient, press the

attachment onto handle and immerse the

trimming head in a glass with warm water for a

few minutes. Then switch on the appliance and

rinse it under the tap.

English

4Carefully shake off excess water from the beard

styler, combs and nose/ear trimmer

attachments and let them air dry completely.

Dry the cleansing brush attachment with a

towel.

Never dry the cutting unit with a towel or

tissue, as this may damage the trimming teeth.

Tip: For optimal performance, lubricate the

teeth of the beard styler attachment with a

drop of sewing machine oil regularly.

How do I use the Quick Clean Pod?

Preparing the Quick Clean Pod for use

1Twist and remove the top of the Quick Clean

Pod.

2Twist the lid off of the Quick Clean Pod

Cartridge.

3Lift the tab on the seal and pull it by the corner

to remove the seal from the Quick Clean Pod

Cartridge.

22 English

4Press the small circular piece on the handle of

the Quick Clean Pod Cartridge to break the

snap hook on the handle.

5Place the Quick Clean Pod Cartridge into the

Quick Clean Pod.

6Put the top of the Quick Clean Pod back onto

the base and turn it clockwise until you hear a

click.

Do not tilt the Quick Clean Pod to prevent

leakage.

Using the Quick Clean Pod

Note: If you use the shaver with shaving foam,

shaving gel or pre-shave products, thoroughly

rinse the shaving heads before you use the Quick

Clean Pod (see 'How do I clean my appliance and

the attachments?').

English

Always shake excess water off the shaver before

you place it in the Quick Clean Pod.

1Place the shaver upside down into the Quick

Clean Pod. The shaver automatically detects

that it is in the Quick Clean Pod.

2Switch on the shaver to start the cleaning

program.

Each cleaning program takes approximately

one minute. During the cleaning program the

cleaning symbol lights up continuously and the

blue icon pulses.

The shaver handle vibrates twice quickly when

the cleaning program is finished.

3Let the shaver air-dry completely in the Quick

Clean Pod before storing it.

Replacing the Quick Clean Pod Cartridge

Replace the Quick Clean Pod Cartridge

immediately when the cartridge replacement icon

on the Quick Clean Pod becomes visible or follow

the table below.

Frequency of use Cycles When to replace

the Quick Clean

Pod Cartridge

Every day About 30 Every month

A few times per week About 20 Every 2 months

Every week About 13 Every 3 months

Every month About 3 Every 3 months

24 English

1Twist and remove the top of the Quick Clean

Pod.

2Lift the Quick Clean Pod Cartridge out of the

Quick Clean Pod by the handle.

3Pour any remaining fluid down a drain and

recycle the empty cartridge in accordance with

local waste regulations.

4Place a new Quick Clean Pod Cartridge into the

Quick Clean Pod (see 'Preparing the Quick

Clean Pod for use').

Scan the QR code to the left or visit

www.philips.com/cleaning-cartridge to order

replacement Quick Clean Pod Cartridges.

How do I replace the shaving heads?

For maximum shaving performance, we advise you

to replace the shaving heads every two years.

Replace damaged shaving heads immediately.

Always replace the shaving heads with original

Philips shaving heads (see 'Ordering accessories').

Replacing the shaving heads

1Switch off the shaver.

English

2Press the release buttons on the shaving unit

and pull the shaving head holder off the

shaving unit.

3Turn the retaining rings anticlockwise and

remove them. Place them aside in a safe place.

4Remove the shaving heads from the shaving

head holder.

Discard the used shaving heads immediately to

avoid mixing them with the new shaving heads.

5Place new shaving heads in the holder.

6Place the retaining rings back onto the shaving

heads and turn them clockwise to reattach the

retaining ring.

26 English

- Each retaining ring has two recesses that fit

exactly into the projections of the shaving head

holder. Turn the ring clockwise until your hear a

click to indicate that the ring is fixed.

Note: Hold the shaving head holder in your

hand when you reinsert the shaving heads and

reattach the retaining rings. Do not place the

shaving head holder on a surface, as this may

cause damage to the shaving heads.

7Insert the hinge of the shaving head holder into

the slot in the top of the shaving unit and close

the shaving unit.

Support

Ordering accessories

To buy accessories or spare parts, visit

www.philips.com/parts-and-accessories or go to

your Philips dealer. You can also contact the

Philips Consumer Care Center in your country (see

the international warranty leaflet for contact

details).

The following accessories and spare parts are

available:

- SH71 replacement Philips shaving heads

- CC12 Philips Quick Clean Pod Cartridge 2-pack

- CC13 Philips Quick Clean Pod Cartridge 3-pack

- CC16 Philips Quick Clean Pod Cartridge 6-pack

Note: The availability of the accessories may differ

by country.

English

Troubleshooting

This chapter summarizes the most common

problems you could encounter with the appliance.

If you are unable to solve the problem with the

information below, visit www.philips.com/support

for a list of frequently asked questions or contact

the Consumer Care Center in your country.

Shaver

Problem Possible cause Solution

The appliance

does not work

when I press

the on/off

button.

The appliance is

still attached to the

wall socket. For

safety reasons, the

appliance can only

be used without

cord.

Unplug the appliance and

press the on/off button to

switch on the appliance.

The rechargeable

battery is empty. Recharge the battery.

The travel lock is

activated. Press the on/off button for 3

seconds to deactivate the

travel lock.

The shaving unit is

soiled or damaged

to such an extent

that the motor

cannot run.

Clean the shaving heads

thoroughly or replace them.

Theappliance

does not shave

as well as it

used to.

The shaving heads

are damaged or

worn.

Replace the shaving heads.

Hairs or dirt

obstruct the

shaving heads.

Clean the shaving heads

thoroughly.

28 English

Problem Possible cause Solution

Water is

leaking from

the bottom of

the appliance.

During cleaning,

water may collect

between the inner

body and the outer

shell of the

appliance.

This is normal and not

dangerous because all

electronics are enclosed in a

sealed power unit inside the

appliance.

Philips Quick Clean Pod

Problem Possible cause Solution

My shaver isn't clean

after using the Philips

Quick Clean Pod.

You removed the

shaver before the

cleaning program

was finished.

Leave the shaver in

the Philips Quick

Clean Pod for the full

cleaning program.

Each cleaning

program takes

approximately 1

minute. The cleaning

icon goes out when

the cleaning program

is finished.

The Philips Quick

Clean Pod Cartridge

needs to be replaced.

Replace the Philips

Quick Clean Pod

Cartridge.

The Philips Quick

Clean Pod is tilted. Place the Philips

Quick Clean Pod on a

flat surface.

My Philips Quick

Clean Pod does not

switch on.

The Philips Quick

Clean Pod is

motor of the shaver.

Place the shaver into

the Philips Quick

Clean Pod. Switch on

the shaver.

The shaver is

connected to the wall

socket.

Disconnect the

shaver from the

supply unit.

The shaver battery is

empty. Charge the shaver

before using the

Philips Quick Clean

Pod.

English

My Philips Quick

Clean Pod is

overflowing.

You regularly use the

Philips Quick Clean

Pod after rinsing the

shaver but not

shaking off excess

water.

Shake off excess

water after rinsing

the shaving heads

each time before

putting the shaver

into the Philips Quick

Clean Pod.

You shaved with

shaving gel or foam

and did not rinse the

shaver before using

the Philips Quick

Clean Pod.

Rinse the shaving

heads thoroughly

before using the

Philips Quick Clean

Pod (see 'Using the

Quick Clean Pod').

30 English

3000.057.1977.1 (13/8/2020)

>75 % recycled paper

>75 % papier recyclé

Table of Contents

Philips S5589/30 User Manual

Related Manuals