Philips SHB9001WT/00 User Manual
Displayed below is the user manual for SHB9001WT/00 by Philips which is a product in the Headphones & Headsets category. This manual has pages.
Related Manuals
www.philips.com/welcome
GB Bluetooth stereo headset
SHB9001WT
2
Table of contents
1 Important 3
1.1 Hearing safety 3
1.2 Electric-, Magnetic- and Electromagnetic
Fields (“EMF”) 3
1.3 General maintenance 4
1.4 Disposal of your old product 4
1.5 Remove the integrated battery 4
1.6 Notice for the European Union 5
1.7 Trademarks 5
2 inthebox 6
3 Whatelse need 6
4 Whatyoucandowith
yourheadset 6
5 Overviewofyour
Bluetoothstereoheadset 7
6 Getstarted 8
6.1 Charge your headset 8
6.2 Pair your headset with your
mobile phone 8
7 Usingyour
Bluetoothstereoheadset 10
7.1 Connecting to your mobile phone 10
7.2 Automatic power saving 10
7.3 Operating your headset 10
7.4 Wearing your
Bluetooth stereo headset 12
8 Usingmoreofyour
Bluetoothstereoheadset 13
8.1 Use with the audio cable 13
8.2 Learn about the battery status 13
8.3 Learn about simultaneous use for
voice and audio 14
8.4 Learn about FullSound 14
9 Technicaldata 15
10 Frequentlyaskedquestions 16
3
ENGLISH
1 Important
1.1 Hearingsafety
Danger
To avoid hearing damage limit the time you use
the headphones at high volume and set the
volume to a safe level. The louder the volume
the shorter is the safe listening time.
Be sure to observe the following
guidelines when using your headphones.
• Listenatreasonablevolumesforreasonable
periods of time.
• Becarefulnottoadjustthevolume
continuously upwards as your hearing adapts.
• Donotturnupthevolumesohighthatyou
can’t hear what’s around you.
• Youshouldusecautionortemporarily
discontinue use in potentially hazardous
situations.
• Usingthisheadsetwithbothearscovered
while driving is not recommended and may
be illegal in some areas while driving.
• Foryoursafetyavoiddistractionsfrom
music or phone calls while in traffic or other
potentially dangerous environments.
• Excessivesoundpressurefromearphones
and headphones can cause hearing loss.
1.2 Electric-,Magnetic-and
ElectromagneticFields( EMF )
Philips Electronics manufactures and sells
many products targeted at consumers, which,
like any electronic apparatus, in general
have the ability to emit and receive electro
magnetic signals.
One of Philips leading Business Principles
is to take all necessary health and safety
measures for our products, to comply with
all applicable legal requirements and to stay
well within the EMF standards applicable at
the time of producing the products.
Philips is committed to develop, produce
and market products that cause no adverse
health effects.
Philips confirms that if its products are
handled properly for their intended use,
they are safe to use according to scientific
evidence available today.
Philips plays an active role in the
development of international EMF and safety
standards, enabling Philips to anticipate
further developments in standardization for
early integration in its products.
1
2
3
5
4
4
1.3 Generalmaintenance
Toavoiddamageormalfunction:
• Donotexposetheheadsettoexcessiveheat.
• Donotdropyourheadset.
• Donotallowyourheadsettobesubmerged
in water.
• Donotuseanycleaningagentscontaining
alcohol, ammonia, benzene, or abrasives.
If cleaning is required use a soft cloth, if
necessary dampened with a minimum amount
of water or diluted mild soap, to clean the
product.
Aboutoperatingandstorage
temperatures
• Donotoperateorstoreinaplacewhere
temperature is below -15ºC (5ºF) or above
55ºC (131ºF) as this may shorten your
battery life.
1.4 Disposalofyouroldproduct
Yourproductisdesignedand
manufactured with high quality
materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin symbol is
attached to a product, it means the product is
covered by the European Directive 2002/96/EC.
Please be informed about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose of your old product with your
normal household waste. The correct disposal
of your old product will help prevent potential
negative consequences to the environment and
human health.
1.5 Removetheintegratedbattery
If in your country there is no collection /
recycling system for electronic products you
can protect the environment by removing
and recycling the battery before disposing the
headset. Please take the battery to a battery
collection and recycling location.
Removing the battery will destroy the product.
Make sure the headset is disconnected from the
USB charging cable before removing the battery.
Youcanremovethebatterybycompletingthe
following steps.
1 Tear off the ear cushion of the left earshell.
2 Remove the screws that hold the speaker
plate in place.
3 Remove the speaker plate.
4 Cut the battery wires.
5 Remove the battery.
5
ENGLISH
1.6 NoticefortheEuropeanUnion
Hereby, Philips Consumer Lifestyle, BU
Accessories, declares that this Philips Bluetooth
headset SHB9001WT is in compliance with
the essential requirements and other relevant
provisions of Directive 1999/5/EC.
1.7 Trademarks
TrademarksarethepropertyofKoninklijke
Philips Electronics N.V. or their respective
owners. The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any use
ofsuchmarksbyKoninklijkePhilipsElectronics
N.V. is under license.
6
3 What else you’ll need:
A mobile phone that is capable of Bluetooth
stereo streaming, i.e. that is compatible with the
Bluetooth A2DP profile.
Other devices (Notebooks, PDA’s, Bluetooth
adapters, MP3 players etc.) are also compatible if
they share the Bluetooth profiles supported by
the headset. These profiles are:
Forwirelesshandsfreecommunication:
• TheBluetoothheadsetprole(HSP)orthe
Bluetooth Handsfree profile (HFP).
Forwirelessstereolistening:
• TheBluetoothAdvancedAudioDistribution
profile (A2DP).
Forwirelessmusiccontrol:
• TheBluetoothAudioVideoRemoteControl
profile (AVRCP).
The headset features Bluetooth Version 2.0
but will also work with devices featuring other
Bluetooth versions that support the profiles
above.
4 What you can do with
your headset
WithyourPhilipsheadsetyoucan:
• Leadwirelesshands-freeconversations
• Wirelesslylistentomusic
• Wirelesslycontrolmusic
• Switchbetweencallsandmusic
• ListentomusicondeviceswithoutBluetooth
support using the included audio cable
2 What’s in the box:
USB charging cableBluetooth headset
Audio cablePouch
Quick start guide
7
ENGLISH
5 Overview of your Bluetooth stereo headset
LED
indicator
light
Adjustable
headband
Audiojack
Microphone
Mini USB
chargingjack
8
6 Get started
6.1 Chargeyourheadset
Before you use your headset for the first time,
charge the battery for 6 hours for optimum
battery capacity and lifetime.
Warning
Use only the original USB charging cable. Using
another charger may damage or destroy your
headset.
Plug the USB charging cable into your
computers USB socket and connect the charger
cable to the headsets charging socket.
Caution
Finish your call before charging the headset, as
connecting the headset for charging will cut an
ongoing call.
During recharging the LED indicator will show
a red light. The LED will turn off once charging
is complete. Typically a full charge will take
fourhours.Youcanoperatetheheadsetduring
charging.
6.2 Pairyourheadsetwithyourmobile
phone
YourBluetoothstereoheadsetmustbepaired
to your mobile phone before connecting and
using it for the first time with your phone.
“Pairing” will establish a unique encrypted link
between your mobile phone and your headset.
Pairinghastobedone
• beforeusingyourheadsetwithyourmobile
phone for the very first time, or
• afterpairingmorethan2Bluetoothdevices
withyourheadset.Yourheadsetcanstoreup
to 2 paired devices in its memory, if you pair
more than 2 devices the oldest paired device
is overwritten.
• “Pairing”isdifferentfrom“connecting”as
pairing typically only has to be done once,
whereas the phone and headset need to
“connect” every time one of the two devices
was turned off or out of range.
9
ENGLISH
Topairyourheadsetwithyour
mobilephone
Make sure the headset is charged, your mobile
phone is turned on and its Bluetooth feature is
enabled. Check your phones user guide to learn
how to turn on Bluetooth on your phone.
1 With the headset turned off, press
until the LED starts blinking red and blue
alternately. The headset will remain in
“pairing mode” for 5 minutes.
2 Pairing typically involves a few simple steps
outlined below, please check your phones
user guide for details.
3 Access a menu on your mobile phone
typically called “Setup”, “Settings”,
“Bluetooth” or “Connectivity”. Select the
option to discover or search for Bluetooth
devices. After a few seconds your phone
should indicate that it has found the “Philips
SHB9001WT”.
4 Upon selecting the “Philips SHB9001WT”
on your mobile phone typically you will need
to confirm the pairing and enter a passcode.
Please enter the headsets passcode “0000”
(four zeros).
After successful pairing, the headset will connect
tothemobilephone.Youwillhearalongbeep
to confirm successful pairing and the headsets
LED will change from flashing red/blue to
periodically flashing blue every three seconds.
Settings
Bluetooth
Select Back
Connectivity
10:35
Add
Bluetooth
device
Settings
Select Back
Connectivity
10:37
Enter Password
****
0000
Settings
Devices Found
Select Back
10:36
Philips SHB9001WT
10
7 Using your Bluetooth
stereo headset
7.1 Connectingtoyourmobilephone
Turn on the headset by pressing until the LED
lights up. Once turned on the headset will re-
connect automatically to the last device it was
connected with. If the last connected device is
not available the headset tries to reconnect to
the penultimate device that was connected to
the headset.
If you turn the mobile phone or its Bluetooth
feature on after turning on the headset connect
the headset from your mobile phones Bluetooth
menu.
7.2 Automaticpowersaving
If your headset cannot find any Bluetooth device
to connect to in range within five minutes it will
automatically power down to save battery life.
7.3 Operatingyourheadset
To control the headset you
tap, hold and double tap the
headsets buttons. A “tap”,
“hold” and “double tap”
differs in the duration and
speed of the button press.
1 sec
11
ENGLISH
The table below shows how to operate your headset:
In order to: Do this: Sound and LED indicator
feedback
Enter pairing mode Press until the LED starts
blinking red / blue alternately
Alternating red/blue flash
Turn headset on Press for 2 seconds •3xredash:batteryislow
•2xredash:>25%of
charge remaining.
•1xblueash:>50%of
charge remaining.
Turn headset off Hold for min. 4 sec One long beep
Play / Pause music Tap
Stop music Hold
Skip Fwd/Bwd Tap or
FullSound Hold and simultaneously
for 4 sec.
One short beep: On
Two short beeps: Off
Adjustvolume Tap VOL- or VOL+
Pick up a call / End a call Tap
Pick up a 2nd call / put other call
on hold / switch back*
Tap
Rejectacall Hold One long beep
Redial the last number Double tap Two short beeps
Activate voice dialing* Hold until “beep” sound One short beep
Mute Mic Double tap (during call) Short beep every five
seconds until mute is turned
off.
Transfer call to phone* Hold One short beep
Other status indicators:
Connected to Bluetooth device
(while in standby or while
listening to music)
Blue light flashes every 3 seconds.
Ready for pairing In pairing mode, LED light flashes continuously alternating red
and blue.
On but not connected Blue light flashing fast.
In call While call is ringing, blue light flashes fast (twice per second).
After call pick up, slows down to once per second.
Low battery LED will flash red instead of blue. A short double beep will
be heard every minute with five minutes or less of talk time
remaining.
* Available if supported by your mobile phone
12
7.4 Wearingyour
Bluetoothstereoheadset
Theheadbandisfullyadjustabletocustomize
the fit to your liking. The soft slow recovery
foamcushionsprovideexcellentsoundsealing
and long lasting listening comfort.
Youcantwisttheearshellonitshingeforsingle-
sidedlisteningforDJmixingandmonitoring.
Flat-fold the headphone by twisting both
earshells and put it into the travel pouch for
transport.
13
ENGLISH
8 Using more of your
Bluetooth stereo headset
8.1 Use with the audio cable
Youcanuseyourheadsetwithnon-Bluetooth
enabled devices or on airplanes (in which the
use of Bluetooth may be restricted) by taking
advantageoftheheadsetsaudiojack.Corded
operation does not require battery power
for music listening. The microphone and the
FullSound digital sound enhancement will not
work via the audio cable.
Finish your call before connecting the audio
jack,asthiswillswitchoffbatterypowerandcut
an ongoing call.
Connect one end of the included audio cable to
theheadsetsaudiojackandtheotherendtothe
musicdevicesheadphonejack.
8.2 Learn about the battery status
Immediately after turning the headset on, the
LED will indicate the battery status.
LED behaviour Battery status
3xredblinking Lessthan25%battery
remaining
2xredblinking Lessthan50%ofcharge
remaining
1xblueblinking 50%ormoreofcharge
remaining
The LED will continuously flash red with about 5
minutesoftalktimeremaining.Youwillalsohear
two short beeps every minute to remind you to
end the call or transfer it to your phone before
the battery runs out.
Mini USB
chargingjack
14
8.3 Learn about simultaneous use for
voice and audio
YourBluetoothstereoheadsetcanconnectto
• oneBluetoothaudiodevice(supportingthe
A2DP and AVRCP Bluetooth profile) and
• oneBluetoothcommunicationdevice
(supporting HFP or HSP Bluetooth profile) at
the same time.
Therefore you can connect your Bluetooth
stereo headset.
• withaBluetoothstereoenabledphoneto
both listen to music and lead calls, or
• withaBluetoothphonethatdoesnot
support Bluetooth stereo (A2DP) to lead
calls and at the same time to a Bluetooth
audio device (Bluetooth enabled MP3 player,
Bluetooth audio adapter etc.) to listen to
music. Make sure to pair the phone first
with your Bluetooth headset, then turn both
the phone and headset off to then pair the
Bluetooth audio device.
With the SwitchStream feature you can listen to
music and monitor your calls at the same time.
Even while listening to music, you will hear a ring
tone when receiving a call and can switch to the
call simply by tapping the button.
8.4 Learn about FullSound
FullSound is a smart digital sound enhancement
algorithm, which runs on a powerful processor
inside your Bluetooth headset.
It restores and enhances bass, treble, stereo
effects and dynamics of compressed music
and leads to a more natural, “real life” sound
experiencebasedonyearsofacousticresearch
and tuning.
The FullSound feature decreases music playing
timebylessthan10%ifactivated.Thefeature
is activated when you buy the product, to
turn FullSound off or on hold and
simultaneouslyfor4seconds.Youwillhearone
short beep after turning FullSound on, and two
short beeps after turning FullSound off.
Tip
The FullSound feature is available during wireless
operation,notwhileusingtheaudiojack.
15
ENGLISH
9 Technical data
• Upto17hoursofplaytimeor18hoursof
talk time
• Upto400hoursofstandbytime
• Typicaltimeforafullcharge:4hours
• RechargeableLithium-Polymerbattery
(460mAh)
• Bluetooth2.0+EDR,Bluetoothstereo
support (A2DP – Advanced Audio
Distribution Profile, AVRCP – Audio Video
Remote Control Profile), Bluetooth mono
support (HSP – Headset Profile, HFP
– Hands-Free Profile)
• FullSounddigitalsoundenhancement
• Digitalecho&noisereduction
• 3.5mmaudiojackforcordedheadphone
mode
• Adjustable,atfoldingheadband.
• Noiseisolatingslowrecoveryfoam.
• Operatingrangeupto15meters(50feet)
Specicationsaresubjecttochangewithout
notice.
16
10 Frequently asked questions
Bluetoothheadsetdoesnotswitchon.
Battery is very low.
Charge your Bluetooth headset.
Bluetoothheadsetdoesnotswitchon.
Audio cable is connected.
Unplug the audio cable.
Noconnectiontomobilephone.
Bluetooth disabled.
Enable Bluetooth on your mobile phone and turn
the headset on after turning on the phone.
Mobilephonecannotfindheadset.
• Theheadsetmaybeconnectedtoanother
previously paired device.
Turn the currently connected device off or
move it out of range.
•Pairingsmayhavebeenresetorheadsethas
been previously paired with other device.
Start the pairing process as described in this
user manual.
Redialingdoesnotwork.
Yourmobilephonemaynotsupportthisfeature.
Voicedialingdoesnotwork.
Yourmobilephonemaynotsupportthisfeature.
TheheadsetisconnectedtoaBluetooth
stereoenabledphone,butmusicwillplay
onthephone sspeakeronly.
Phone may have option to listen to music via
speaker or headset.
Check your phones user guide on how to transfer
the music to the headset.
Audioqualitywhenstreamingfromphone
isveryloworaudiostreamingdoesnot
workatall.
Phone may not be A2DP compatible and only
support (mono) HSP/HFP.
Check your phones compatibility.
Audioqualityispoorandcracklingnoises
canbeheard.
Bluetooth audio source is out of range.
Reduce the distance between the headset and
the Bluetooth audio source, or remove obstacles
between them.
Ihearbutcannotcontrolthemusiconmy
device(e.g.skipforward/backward).
Bluetooth audio source does not support
AVRCP.
Check the user manual of your audio source.
Theheadsetisnotchargingorcharging
veryslowlywhenusingtheUSB
chargingcable.
The USB port provides no or too little power.
Your USB port should provide 500mA. Try
another USB port at the back of your PC or a
powered USB hub.
Please visit www.philips.com/welcome for
additional support.
©2011KoninklijkePhilipsElectronicsN.V.
All rights reserved.
TrademarksarethepropertyofKoninklijke
Philips Electronics N.V. or their respective
owners.
Philips Consumer Lifestyle
_
_
_
Philips Consumer Lifystyle AMB 544-9056
A Q9 5 -56F-992KR/2nd 2008
........................................................ ...........................................................................
(Report No. / Numéro du Rapport) (Year in which the CE mark is affixed / Année au cours
de laquelle le marquage CE a été apposé)
EC DECLARATION OF CONFORMITY
(DECLARATION DE CONFORMITE CE)
We / Nous, PHILIPS CONSUMER LIFESTYLE B.V.
(Name / Nom de l’entreprise)
TUSSENDIEPEN 4, 9206 AD DRACHTEN, THE NETHERLANDS
(address / adresse)
Declare under our responsibility that the electrical product(s):
(Déclarons sous notre propre responsabilité que le(s) produit(s) électrique(s):)
SHB9000/00, /05, /10
SHB9001/00, /05, /10
SHB9001XX/00, /05, /10
PHILIPS (XX = any alphabetical for different color)
....................................................................... ...........................................................
(brand name, nom de la marque) (Type version or model, référence ou modèle)
Bluetooth Headset
..............................................................................................
(product description, description du produit)
To which this declaration relates is in conformity with the following harmonized standards:
(Auquel cette déclaration se rapporte, est conforme aux normes harmonisées suivantes)
(title, number and date of issue of the standard / titre, numéro et date de parution de la norme)
EN 60950-1:2001+A11:2004
EN 301 328 V1.7.1: 2006
EN 301 489-1 V1.8.1: 2008
EN 301 489-17 V1.3.2: 2008
EN 50360:2002
Following the provisions of :
(Conformément aux exigences essentielles et autres dispositions pertinentes de:)
1999/5/EC (R&TTE Directive) (Directive R&TTE 1999/5/CE)
And are produced under a quality scheme at least in conformity with ISO 9001 or CENELEC
Permanent Documents
(Et sont fabriqués conformément à une qualité au moins conforme à la norme ISO 9001 ou aux Documents Permanents CENELEC)
The Notified Body ....................................................... performed ...............................................
(L’Organisme Notifié) (Name and number/ nom et numéro) (a effectué) (description of intervention /
description de l’intervention)
And issued the certificate, .................................................................
(et a délivré le certificat) (certificate number / numéro du certificat)
Remarks:
(Remarques:)
........................................................... ............................................................................................
(place,date / lieu, date) (signature, name and function / signature, nom et fonction)
N.A.
N.A.
Drachten, The Netherlands
10/12/2009
A.Speelman, Compliance Manager
N.A.