Table of Contents
Philips SHC5102/10 User Manual
Displayed below is the user manual for SHC5102/10 by Philips which is a product in the Headphones & Headsets category. This manual has pages.
Related Manuals
EN User manual
SHC5102
www.philips.com/welcome
Register your product and get support at Indoor wireless headphones
A B
CD
F
G
E
a b
d e
c
H
21
CHANNEL
21
CHANNEL
CHANNEL
1 2
CHANNEL
1 2
4EN
1 What’s in the box
1) 2 x Headphones 2) Transmitter
3) AC/DC adaptor 4) Antenna tube
5) 4 x AAA rechargeable shortened sleeve NiMH batteries (SBC
HB550L)
5EN
English
2 Get started
Note
Before using the headphones for the rst time, charge the supplied •
batteries for at least 10 hours.
•Only use Philips rechargeable shortened sleeve NiMH batteries with your
headphones. Other types of rechargeable batteries cannot be charged
with this system.
•AAA alkaline batteries can be used to operate the headphones, but
cannot be charged with this system.
If the volume of the audio source is insufcient, the transmitter •
automatically turns off.
1 Install/Replace supplied batteries (Fig. B).
2 Install the antenna tube into the transmitter (Fig. C).
3 Power on the transmitter (Fig. D).
Red LED is on when audio source is connected. »
Red LED blinks if no audio source is connected for two »
minutes.
Red LED is off if no audio source is connected for four »
minutes.
4 To charge the headphones, connect the charging cable with
the headphones (Fig. E).
Headphones: red LED is off during charge. »
Transmitter: green LED is on during charge and is off when »
headphones are fully charged.
When one headphone is during charge, another one can still
be used.
Transmitter: both red and green LED are on. »
5 Power on the headphones and red LED is on (Fig. F).
6 Connect the audio device with the transmitter (Fig. G).
Red LED is on when audio source is connected. »
Tip
If there is interference, tune the transmitter and the headphones to the •
same channel (Fig. H).
6EN
3 Product version table
Ver-
sion /
Region
Adaptor type
number
Input
voltage /
frequency
Output
voltage
Carrier /
Reception
frequency
Channel 1 Channel 2
/10
Europe
SVV-005-
080-020-A2
100-240V
/ 50/60Hz
8V
200mA
863.5MHz 864.5MHz
/05 UK SBH-005-
080-020-A2
100-240V
/ 50/60Hz
8V
200mA
863.5MHz 864.5MHz
For further product support, please visit www.philips.com/welcome
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved.
SHC5102_UM_10_V1.2
0197