Philips TAVS700/10 User Manual
Displayed below is the user manual for TAVS700/10 by Philips which is a product in the Radios category. This manual has pages.
Related Manuals
Register your product and get support at
www.philips.com/welcome
User manual
TAVS700
Original radio
EN 1
Contents
1 Important ............................................................. 2
Important safety instructions ...................................2
Notice ..............................................................................2
2 Your FM/DAB radio .......................................... 4
Introduction ...................................................................4
About DAB......................................................................4
What's in the box .........................................................4
Overview of the main unit .........................................5
3 Get started ......................................................... 6
Prepare telescopic antenna .....................................6
Connect power .............................................................6
Adjust display brightness ..........................................6
Set the Clock ................................................................6
Turn on ............................................................................ 7
Switch to standby mode ...........................................7
Adjust volume level ..................................................... 7
4 Listen to radio ....................................................7
Listen to DAB radio ..................................................... 7
Listen to FM radio .......................................................8
5 Bluetooth ............................................................ 9
Play from a Bluetooth device ...................................9
Control playback ..........................................................9
6 Other features ................................................. 10
Set the Sleep Timer...................................................10
7 Product information ...................................... 10
8 Troubleshooting ...............................................11
2 EN
1 Important
Important safety instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this speaker near water.
- Clean only with dry cloth.
- Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
- Do not install near any heat sources such
as radiators, heat registers, stoves, or other
speaker (including amplifiers) that produce
heat.
- Protect the power cord from being walked
on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the speaker.
- Only use attachments and accessories
specified by the manufacturer.
- Unplug this speaker during lightning storms
or when unused for long periods of time.
- Refer all servicing to qualified service
personnel. Servicing is required when the
speaker has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or
objects have fallen into the speaker, the
speaker has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
- Speaker shall not be exposed to dripping
or splashing.
- Do not place any sources of danger on the
speaker (e.g. liquid filled objects, lighted
candles).
- Use only power supplies listed in the user
manual.
- Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
• Neverremovethecasingofthisspeaker.
• Neverlubricateanypartofthisspeaker.
• Placethisspeakeronaflat,hardandstable
surface.
• Neverplacethisspeakeronotherelectrical
equipment.
• Onlyusethisspeakerindoors.Keepthis
speaker away from water, moisture and liquid-
filled objects.
• Keepthisspeakerawayfromdirectsunlight,
naked flames or heat.
Notice
Hereby, TP Vision Europe B.V. declares
that this speaker is in compliance with the
essential requirements and other relevant
provisions of Directive 2014/53/EU. You can
find the Declaration of Conformity on
www.philips.com/support.
This speaker is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2012/19/EU.
Please be informed about the local separate
collection system for electrical and electronic
products.
Please act according to your local rules and
do not dispose your old products with your
normal household waste. Correct disposal of
your old products will help prevent potential
negative consequences for the environment
and human health.
EN 3
Your speaker contains batteries covered by
the European Directive 2013/56/EU, which
cannot be disposed with normal household
waste. Please be informed about the local
rules on separate collection of batteries
because correct disposal will help prevent
negative consequences for the environmental
and human health.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags and protective foam sheet).
Your speaker consists of materials which can
be recycled and reused if disassembled by a
specialized company. Please observe the local
regulations regarding disposal of packaging
materials, exhausted batteries and old
equipment.
Note
• Thetypeplateislocatedonthebackofthe
speaker.
4 EN
2 Your FM/DAB
radio
Congratulations on your purchase, and
welcome to Philips! To fully benefit from
the support that Philips offers, register your
speaker at www.philips.com/welcome.
Introduction
With this speaker, you can enjoy both FM
radio and Digital Audio Broadcasting (DAB)
radio.
About DAB
About Digital Audio Broadcasting (DAB)
DAB digital radio is a new way of broadcasting
radio via a network of terrestrial transmitters.
It provides listeners with more choice and
information delivered in crystal clear, crackle-
free sound quality.
– The technology allows the receiver to lock
on to the strongest signal it can find.
– With DAB digital stations there are no
frequencies to remember, and sets are
tuned by station name, so there's no
returning on the move.
What is a multiplex?
Digital radio operation is made up of a single
block of frequencies called a multiplex. Each
multiplex works within a frequency spectrum,
such as Band III for DAB broadcasts.
DAB BROADCASTERS AND DLS
Each DAB broadcaster (or multiplex operator)
also provides text and audio data services.
Some programmes are supported by Dynamic
Label Segments (DLS).This is data which you
can read as scrolling text on your DAB radio
display. Some stations transmit the latest
news, travel, and weather, what's on now and
next, website addresses and phone numbers.
For more information on digital radio coverage
and services, please visit www.drdb.org.
What's in the box
Check and identify the contents of your
package:
• Mainunit
• ACpowercord
• Quickstartguide
• WorldwideWarranty
EN 5
Overview of the main unit
1. Small knob (Left)
- Press: Turn on the speaker or switch to
standby mode
- Rotate: Select a source
2. Big knob (Left)
- Rotate: Select a preset radio station
3. Display panel
- Show current status
4. Small knob (Right)
Press
- conrm the menu option
- in DAB/FM mode, store radio stations
- in BT mode, start or pause play
Double press
- return to the previous menu
Press and hold
- enter the menu
Rotate
- adjust the volume
5. Big knob (Right)
Rotate
- select the menu
- in DAB mode, select a DAB station
- in FM mode, tune to a FM station
- in BT mode, skip to the previous/next
track
6. AC~
- Connect the AC power cord
7. Telescopic antenna
8. 5V 2A
- To charging external equipment
6 EN
3 Get started
Caution
• Useofcontrolsoradjustmentsorperformance
of procedures other than those specified herein
may result in hazardous radiation.
Always follow the instructions in this chapter
in sequence.
If you contact Philips, you will be asked for the
model and serial number of this speaker. The
model number and serial number are on the
back of the speaker. Write the numbers here:
Model No. ________________________
Serial No. ________________________
Prepare telescopic antenna
For optimal reception, fully extend and adjust
the direction of the telescopic antenna.
Tip
• Positiontheantennaasfarawayaspossible
from your TV or other radiation source to
prevent interference.
Connect power
Caution
• Riskofproductdamage!Makesurethatthe
power supply voltage corresponds to the
voltage on the back or the underside of the
product.
• Riskofelectricshock!WhenyouunplugtheAC
power cord, always pull the plug from the
socket. Never pull the cord.
• UseonlytheACpowercordspecifiedbythe
manufacturer or sold with this speaker.
Note
• Thetypeplateislocatedonthebackofthe
speaker.
Connect the AC~ socket on the speaker and
the power socket on the wall with the AC
power cord.
Adjust display brightness
1 In standby mode, press and hold the small
knob on the right side for 2 second or more
to display the menu.
2 Rotate the big knob on the right side to
select the menu "DIM".
3 Press the small knob on the right side to
confirm your select.
4 Rotate the big knob on the right side to
select different levels of display brightness.
Set the Clock
1 In standby mode, press and hold the small
knob on the right side for 2 second or more
to display the menu "CLOCK".
2 Press the small knob on the right side to
confirm to activate the clock setting mode,
the time format [12H] or [24H] begins to
blink.
3 Rotate the big knob on the right side to
select [12H] or [24H].
4 Press the small knob on the right side to
confirm, the hour digits begin to blink.
5
Repeat
above
steps 3-4 to set the hour and
minute.
Note
• Ifnobuttonispressedin10seconds,the
speaker exits clock setting mode automatically.
EN 7
Automatically synchronzies clock
time
If clock not set, when tune to an RDS/DAB
radio station that transmits time signals, the
speaker can synchronize with time transmitted
by RDS/DAB station automaticall.
Manually synchronzies clock time
If clock is setted, when tune to an RDS/DAB
radio station that transmits time signals, you
can synchronzies clock time manually in the
following:
1 Press and hold the small knob on the right
side for 2 second or more to display the
menu.
2 Rotate the big knob on the right side to
select the menu "INFO".
3 Press the small knob on the right side to
confirm your select.
4 Rotate the big knob on the right side to
select the menu "CT".
5 Press the small knob on the right side to
synchronzies clock time.
Turn on
Press the small knob on the left side, the
speaker switches to the last selected source.
Switch to standby mode
Press the small knob on the left side to switch
the speaker to standby mode. The time (if set)
appear.
Adjust volume level
Rotate the small knob on the right side to
increase/decrease the volume level.
4 Listen to radio
Note
• Make sure that the antenna is fulled
extended
Listen to DAB radio
Tuning to a DAB radio station
1 Rotate the small knob on the left side to
select DAB radio.
2 Rotate the big knob on the right side to
navigate through the available DAB
stations.
Scan DAB radio stations
1 Press and hold the small knob on the right
side for 2 second or more to display the
menu "SCAN".
2 Press the small knob on the right side to
navigate through the available DAB
stations, and then broadcasts the first
available station.
- "SCANNING" is blink.
Store DAB radio stations manually
Note
• Youcanstoreupto20DABradiostations.
1 Rotate the big knob on the right side to
tune to a DAB radio station.
2 Press the small knob on the right side to
activate programming mode.
3 Rotate the big knob on the right side to
select a preset number.
4 Press the small knob on the right side to
confirm to store the station.
5 Repeat steps 1 to 4 to store other DAB
stations.
8 EN
Note
• Ifthespeakerisunpluggedorifapowerfailure
occurs, the preset stations will not be erased.
Select a preset DAB radio station
Rotate the big knob on the left side to select
your desired preset number.
The speaker will tune to the selected station
automatically.
DAB Information Display
You can view the DAB service information in
the following modes.
1 Press and hold the small knob on the right
side for 2 second or more to display the
menu.
2 Rotate the big knob on the right side to
select the menu "INFO".
3 Press the small knob on the right side to
confirm your select.
4 Rotate the big knob on the right side to
view the information.
5 Press the small knob on the right side to
exit the information view.
The information list is as follows:
- Station Name
- Ensemble Name
- Clock
- DLS (Dynamic Label Segment)
- Signal Strength
- Programme Type
- Frequency
- Bit Rate
- Audio
Note
• DependingontheDABradiostationyou
are tuning to, some information modes may be
unavailable.
Listen to FM radio
Mnaually tuning to a FM radio
station
1 Rotate the small knob on the left side to
select FM radio.
2 Rotate the big knob on the right side to
adjust the FM frequency until you nd the
station you want.
Store FM radio stations
Note
• Youcanstoreupto20FMradiostations.
Automatically
1 Press and hold the small knob on the right
side for 2 second or more to display the
menu "SCAN".
2 Press the small knob on the right side to
stores all the available FM radio stations
and broadcasts the first station.
- “SCANNING” is blink.
Manually
1 Rotate the big knob on the right side to
tune to a FM radio station.
2 Press the small knob on the right side to
activate programming mode.
3 Rotate the big knob on the right side to
select a preset number.
4 Press the small knob on the right side to
confirm to store the station.
5 Repeat steps 1 to 4 to store other FM
stations.
Note
• Ifthespeakerisunpluggedorifapowerfailure
occurs, the preset stations will not be erased.
EN 9
Select a preset FM radio station
Rotate the big knob on the left side to select
your desired preset number.
The speaker will tune to the selected station
automatically.
Show RDS information
RDS (Radio Data System) is a service that
allows FM stations to show additional
information.
1 Press and hold the small knob on the right
side for 2 second or more to display the
menu.
2 Rotate the big knob on the right side to
select the menu "INFO".
3 Press the small knob on the right side to
confirm your select.
4 Rotate the big knob on the right side to
view the information.
5 Press the small knob on the right side to
exit the information view.
The information list is as follows:
- Station name
- Program type such as [NEWS] (news),
[SPOR T] (sport), [POP M] (pop music)...
- Time
- Text
- Frequency
Note
• DependingontheRDSstationyouaretuning
to, some information modes may be
unavailable.
5 Bluetooth
Play from a Bluetooth device
You can stream audio from a device to this
speaker using Bluetooth connection.
Note
• MakesuretoturnBluetoothontomakea
device discoverable before pairing.
• Thespeakerandadevicemustbeplaced
within 10 meters Bluetooth sensing distance.
1 Rotate the small knob on the left side to
select BT, "BT" is blink.
2 On a Bluetooth device, turn Bluetooth on
to make it discoverable.
3 Select "Philips VS700" on the device for
pairing.
- For an older device, input pairing
password 0000.
- The "BT" light on when connection is
successful.
4 Press the B button on the Bluetooth
device to start streaming music.
Control playback
During play
- Turn the small knob on the right side to
increase/decrease the volume.
- Press the small knob on the right side to
play/pause.
- Turn the big knob on the right side to skip
to the previous/next track.
Disconnect Bluetooth pairing
1 Press and hold the small knob on the right
side for 2 second or more to display the
menu "CLEAR BT".
2 Press the small knob on the right side to
confirm, "BT" is blink.
10 EN
6 Other features
Set the Sleep Timer
You can set the speaker to turn off
automatically after a certain period of time.
1 When the speaker is turned on, press and
hold the small knob on the right side for 2
second or more to display the menu.
2 Rotate the big knob on the right side to
select the menu "SLEEP".
3 Press the small knob on the right side to
confirm your select.
4 Rotate the big knob on the right side to
select a set period of time (in minutes: 15,
30, 45, 60).
Note
• If"OFF"isselected,sleeptimerwillnotactivate.
5 Press the small knob on the right side to
confirm your select, the "Zz" is displayed.
7 Product
information
General information
Power requirement 100-240V, 50/60Hz
Power consumption 22W
Dimensions (W x H x D) 335 x 185 x 148 mm
Weight (main unit) 2.52 kg
Tuner
Tuning range FM: 87.5 - 108MHz
DAB
Frequency range Band III (174 - 240MHz)
Amplifier
Output power 10 W x 2
Frequency response 100 - 20000 Hz
Signal to noise ratio > 70 dB
Speakers
Speaker impedance 4Ω
Speaker maximum input power 10W
Speaker driver 3" full range
Bluetooth
Bluetooth version 5.0
Frequency range 2402 - 2480 MHz
Maximum power transmitted 5dBm
Maximum communication range approx. 10m
Compatible Bluetooth profiles A2DP
Note
• Productinformationissubjecttochange
without prior notice.
EN 11
8
Troubleshooting
Warning
• Neverremovethecasingofthisspeaker.
To keep the warranty valid, never try to repair
the speaker yourself.
If you encounter problems when using this
speaker, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/welcome). When you contact
Philips, ensure that the speaker is nearby and
the model number and serial number are
available.
No power
• MakesuretheACpowercordisconnected
properly.
• MakesurethereispowerattheACoutlet.
No sound
• Adjustthevolume.
No response from the speaker
• ReconnecttheACpowerplug,andthen
turn on the speaker again.
Poor radio reception
• Increasethedistancebetweenthespeaker
and your TV or other radiation source.
• Fullyextendtheantenna.
Clock setting erased
• PowerhasbeeninterruptedortheAC
power cord has been disconnected.
• Resettheclock.
Music playback is unavailable on this
speaker even after successful Bluetooth
connection
- The device cannot be used to play music
through this speaker wirelessly.
The audio quality is poor after
connection with a Bluetooth-enabled
device
- The Bluetooth reception is poor. Move the
device closer to this speaker or remove any
obstacle between them.
Cannot connect with this speaker
- The device does not support the profiles
required for this speaker.
- The Bluetooth function of this speaker is
not enabled. Refer to the user manual of
the speaker to find out how to enable the
function.
- This speaker is not in pairing mode.
- This speaker is already connected to
another Bluetooth-enabled device.
Disconnect that device then try again.
Philips and the Philips Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used under license.
This product has been manufactured by and is sold under the
responsibility of TP Vision Europe B.V. or one of its affiliates,
and TP Vision Europe B.V. is the warrantor in relation to this product.
TAVS700_10_UM_V1.0